Hello,
i tried flashing my Alcatel 5020x with SP Flash tool today. I tried once and everything went well except that it got stuck at the boot logo.
i then decided to format all except bootloader. The phone does not at all respond to anything after that. When plugged into computer or power it just has its led indicator on.
The PC does not detect it with or without battery. Not even any plug in/out sound on the PC.
I've tried different ports, uninstall drivers etc, nothing works.
Please Help!
If someone knows Test Point method for this device then please share!
Related
Hello.
I have HTC ONE X for a long time.
today i suddenly got a notification for update (as far as i remember it was the"heartbleed fix" update).
ive downloaded the update and start the installation.
at the moment i press start the phone turned off and became like a "zombie".
hes not turning on, doesnt show the red led while charging (and also doesnt heat up while charging like it used to).
i tried to connect the phone to my pc but pc doesn't recognize the device, and the phone doen't respond to the connection.
some details on the phone (if you need it): CID_044, the rom was official, official recovery and boot, it was relocked because i did it withot changing anything except the unluck and relock.
i tried to download drivers and re installing them, as well as java.
tried to press power +volume up\down\both.
tried to search for device using adb.
tried to rebbot via fastboot and adb (throught the pc).
all this without any luck.
anyone got anothe suggestions? the phone i completly dead?
Hello,
yesterday, I bought a HOX. Today, everything went fine but 30 minutesn ago, I switched it off to change to SIM. Now, I would like to start the phone but it only shows the HTC logo. I also tried to use the hard button. It recognizes the combination but I cannot choose anything. I can only see the screen with FASTBOOT, RECOVERY, FACTORY RESET and so an.
I tried so establish a connection to the computer but also there nothing happens.
I plugged the phone via a USB cable to my laptop - not it shows HBOOT and checking SD card update. Google told me plugged of the cable and it should work. Unfortunately, for me this is not working.
Has anyone an idea what I could do?
I'm looking forward to your answers. Thanks in advance.
So i was using my phone and decided to restart it after updating my adaway files but my phone never turned back on. The two press the power button screens did not show up either. I tried to uses the MSMdownload tool since i thought my phone was somehow bricked but that didnt work either, it just kept restarting the download process after everything was completed. my computer makes a sound when its connected and it connects correctly as a quallcomm 9008 device but even after all this nothing is working. has anyone experienced something like this or does anyone have any advice?
did you try to long press both power button and vol up ...you should feel a vibration...
maybe it's not turned of maybe it's error causing the screen to be off... also is there any heat?
Which method of the unbrick tool did you use? First or second? If the first, then maybe you should give the second also a try.
Sent from my ONEPLUS A3003 using Tapatalk
I've tried everything and I used th me second method yet nothing happened. I can see my phone get recognized by the computer and get listed on the MSN device list yet nothing happens after it finishes the process. After the green line shows up telling me that it's completed everything the process restarts writhing a few minutes unless I unplug it. No vibration no nothing the phone just died on me after I restarted it .
Try doing MSM on a different PC with all drivers installed , hope it helps
Try to repeat flashing again, there is no other way. Use method 2only. Extract tool again and try flash.
When I was used Xperia Z1, I bricked my phone with a soft brick. So I installed driver in my PC and flash Kernel though FASTBOOT(ADB) either it's not show Device in my PC (I show just "Unknown Device").
After that my phone can connect to my PC again (Now It shown C9303 or something that meant it know it's a phone).
So I can flash by Flashtools again. Soft brick is not scary as Hard brick, you'll find some way to bring it back easily.
Hope this help!
PS. Bricked Phone is WEAK in Battery, always connect it with charger.
Today I tried to flash ZUI ROM using MI flash tool, but in the middle of the process there was some USB disconnection error. So, the phone stopped responding from then. That's it. IT WAS DEAD.
The phone then vibrates for a second and stops and then again vibrates, light blinks and vibrates, stops.
Press any button continuously nothing happens. Just vibrate, blink and repeat.
I assume it is hard bricked now. It is not detecting in my laptop. There is nothing in Device Manager too. ZUK driver was previously installed.
Can you tell me what to do now? Is there any solution apart from solution mentioned here https://zukfans.eu/community/thread...-from-hard-brick-state-9008-mode-easily.3504/
I think to try the above too, it has to be detected somewhere in Device Manager?
I don't want to ruin my USB cable for the above method. Is there anything else that can be tried.
No need to disassemble your USB cable. Use a pc/laptop win8. Install all driver and rebrick your device.
Just do the method you mentioned but with a cheap mUSB cable and a type c adapter so you dont destroy your type c cable. I had this same problem, deep flash worked for me.
I really need help..I tried to flash a rom on my HTC but the preloader got corrupted xo my phone went hard bricked. Plugging the phone into a computer just shows a red led and the computer shows nothing in the device manager.
I tried uninstalling the MTK Preloader VCOM driver and reinstalling it but that still didn't work.
Even pressing volume keys while connecting still gave nothing.
I also tried disconnecting the battery and reconnecting the phone to the computer but still nothing.
If there is anyone, please help me.....
I need to unbrick my phone................... I am begging, please help me.