Hello everyone,
I just decided to root my phone and found guides for doing so (and I'm very thankful for those!).
My problem is, that Odin won't recognize my phone, if i connect it after odin is already started
However, if i have my phone in download mode, connect it to my computer and THEN open odin it's recognized just fine.
Any ideas what could cause the problem? And is it even a problem or can i just proceed?
Its the same if i try to connect when not in download mode, odin will only recognize my phone, if i have it connected before odin is started
I have a Note 2 (N7100) on Android 4.1.2
Thanks a lot!
No problems this way.
You can go on with further process.
Try to reinstall correct USB drivers
I just proceeded anyways, meaning connecting the phone in download mode to the PC and then opening odin and it all worked out
thank you for the help!
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
can you still get to download mode?
if so just re-download the firmware and flash with odin
ermmanuel said:
can you still get to download mode?
if so just re-download the firmware and flash with odin
Click to expand...
Click to collapse
the message that said to conect via pc using kies it is downloada mode i tried going to odin again but odin cant detect
woahhh
aaronjasper49 said:
hello i need your help as soon as possible i was flashing my galaxy tab 3 sm-t210 firmware via odin and then suddenly it stopped and unrecognized the device it says i need kies to fis it in the emergency recovery in the kies i need the code that was given when the firmware flashing stopped via kies but i didnt flashed via kies please help me i need a code or a fix please help
Click to expand...
Click to collapse
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
ikhsaricky said:
You can just flash it again, try another computer, i HIGHLY recommended win 7 or xp, run odin "as administartor" mode
****make sure samsung usb driver is installed properly in your comouter****
Is my reply helping you?
Click to expand...
Click to collapse
can i have your pit file in your SM-T210?
As long as it can enter recovery mode and can be recognized, do a STOCK ROM FLASH (USE THE CLEAN METHOD OF FLASHING). Now attempt to do that flash again..
An image/screenshot of the problem might help us to help you.
aaronjasper49 said:
can i have your pit file in your SM-T210?
Click to expand...
Click to collapse
Aw, im using smt311, but flashing with odinnis the simole way,, did yiu finish it?
same thing happened to my t217s when Samsung didn't do anything for a legit issue with my tablet during an OTA update and stated that it was rooted (it has been stock since out of the box). after many attempts (didn't have another computer available) i switched to a different usb port and got it flashed just fine.
hi can i ask something it happened i flash samsung j1 then suddenly in 90percent was cut and i cant go back to download mode. and the phone turn black and cant connect to pc. Can Please can you help me?
I had a similar situation with a Galaxy SM-T113 here in Canada. I was hammering away at it for about 4 days with no luck. All i got was the "use Kies" to fix it message. Kies would not detect my phone though. Anyway what i did that worked was in part already tried earlier.. I already tried for example using a different cable and a different port. And i always got a failure with Odin and attempting the stock firmware flash.
So what did i do ?
I unplugged my Gamepad i keep plugged in 24/7 thinking maybe i had too many USB devices hogging USB port bandwidth.. maybe that was it I don't know.. I also uninstalled Kies but this time i said yes to installing the unified driver it asks you about. I also changed to yet another USB port.
It was working fine before hand.
I was trying to flash the firmware simply to reset the thing like i have done on countless other devices over the years.
I am not new to this sort of thing and was rather surprised to see Odin fail.
So who knows maybe my post here will help others.
I feel relieved i did not brick a perfectly good device. LOL
Hi All
I have An ace 2 which I thinks a cracking phone but am unable to flash root etc as it has to be done via odin!!! And the problem is the USB seems damaged somehow as no pc or laptop will recognise it. It Charges fine but thats it....
Now I have notice that in the stock recovery it says flash update so am hoping that someone will be able to point me in the right direction of an update to stock android 4 or a rooted update file so can really start to use the phone again...
please help..
regards
Lohtse
Good Afternoon, guys!
I have a issue with my Galaxy Note II, i was trying to install original firmware by Odin but unfortunately it didn't work. Odin had error all the time. I tried all of the methods which i found on forum all time my phone was stacked at "Downloading Mode...Do not turn off target". Also i found solution with TWRP and i tried to install TWRP by odin, so it kinda works i had a message that i passed but now for some reason i can't access to download mode at all :crying:
So my question is, how i can access to download mode to make recover?
And anybody know how i can make recovery with bricked phone? i was trying all of the firmware and it didnt work :crying:
Please help, hope you understand what i meant.
Hi, I have flashed my TAB FHD Plus tb-x606f with the wrong firmware (I suppose, because now, she's not booting.)
I was wondering if it was possible to "unbrick" my device ? I know Lenovo can do it with their machines/stuff... but I don't want to send my tablet if I can repair it.
My tablet was working perfectly before she install automaticly Android 10 on my android 9 rooted with magisk. After that, I tried to flash the new firmware with SP Flash tool, and after this process finished, by tablet stopped working. For now, all I have is a red light indicating when it is in charge. I have also a notification on my windows when I plug in usb cable connected to my tablet. I don't know if I can, like "reflash" with the right firmware or just repair boot.img or anything else.
I found that, but doesn't worked for me : https://android.stackexchange.com/questions/239533/unbricking-lenovo-tab-m10-x606f
I don't know what to do, and any help would be greatly appreciated x)
Sorry for my bad english.
Thanks.