Related
So I planned to update to a JB ROM this past weekend and thought to try CM 10. I didn't do a backup of my photos siting on the internal storage. I kept getting a status 7 error so I performed the below steps to successfully complete loading the CM 10 ROM. After though I lost all my photos.
Performed the following:
a. start from stock
b. wipe data/factory reset
c. wipe cache partition
d. wipe dalvik-cache
So I have CM 10 up and running. I looked on xda and google for a way to retrieve files from internal storage wiped away on an Android OS but the two or three possible Windows applications want the phone to run in USB MASS STORAGE when connected to a PC.
CM 10 has 3 options under System Settings->Storage->USB computer connection; including MTP, PTP and Mass Storage. However, when I select MASS STORAGE in the phone and connect it to my Windows 7 PC it automatically moves back to MTP or PTP (depending on which was previous selected before selecting MASS STORAGE).
So if anyone knows how I can make sure USB MASS STORAGE stays enabled when connected would really help or if they know of a way I can retrieve my files some how.
------
running android: 4.1.2
kernel version: 3.0.48-cyanogenmod-ge67063c
cyanogenmod version: 10.0.0-d2att
build number: cm_d2att-userdebug 4.1.2 JZ054K eng.20121113.083104 test-keys
xda_toronto said:
So
Performed the following:
a. start from stock
b. wipe data/factory reset
c. wipe cache partition
d. wipe dalvik-cache
Click to expand...
Click to collapse
If you did these steps above with Stock Recovery, then I am pretty sure that erases your internal (/data/media) file. I know that TWPR and CWM don't touch the internal SD unless you ask it to. Might be SOL.
Something you could try is a PC program like Recuva. It has worked for others in the past.
Also moving this to Q&A and out of General.
Woodrube said:
If you did these steps above with Stock Recovery, then I am pretty sure that erases your internal (/data/media) file. I know that TWPR and CWM don't touch the internal SD unless you ask it to. Might be SOL.
Something you could try is a PC program like Recuva. It has worked for others in the past.
Also moving this to Q&A and out of General.
Click to expand...
Click to collapse
I've tried Recuva. It gives you the option of where the file location is... but there is no option that allows you to see the connected Android Phone. There is one option "On my media card or iPod" but that doesn't prompt or see the phone and there is another option "In a specific location" but that also only shows drives under "My Computer" and any other drives on the network but not the phone.
xda_toronto said:
I've tried Recuva. It gives you the option of where the file location is... but there is no option that allows you to see the connected Android Phone. There is one option "On my media card or iPod" but that doesn't prompt or see the phone and there is another option "In a specific location" but that also only shows drives under "My Computer" and any other drives on the network but not the phone.
Click to expand...
Click to collapse
So I installed the least nightly build from CM (Nov 19th) and USB Mass storage is working.
I can see in Windows Explorer 2 drives... E and F. E shows my External SD card and I see my files.
However, the F: when I click it says please insert disk. This has to be the Internal storage (/storage/sdcard0) but I can't seem to get it to mount to show the system in Windows. Any ideas?
xda_toronto said:
So I installed the least nightly build from CM (Nov 19th) and USB Mass storage is working.
I can see in Windows Explorer 2 drives... E and F. E shows my External SD card and I see my files.
However, the F: when I click it says please insert disk. This has to be the Internal storage (/storage/sdcard0) but I can't seem to get it to mount to show the system in Windows. Any ideas?
Click to expand...
Click to collapse
The internal sd is in ext format; not FAT32, so there's no easypeasy way to simply undelete files, but you can try utils like photorec from testdisk that scan every byte for image header fingerprints (which only works on partitionimages or directly in USB masstorage mode; not MTP).
IMO, you should learn from the pit in your stomach to always, Always, ALWAYS, ALWAYS have BACKUPS in any case, especially when you're mucking about with stuff you don't understand yet.
Hey guys need a bit of help. I have a HTC One X (Endev) running Cyanogenmod 10.1.2. My phone started to dislike certan apps and woukldnt let them run, I though great, A good reason to update Cyanogenmod. Now hgere is where the problem comes in. I connected usb Storage on my comp and deleted EVERYTHING from the SD card. Now I have no access the the SD card on the Phone or the computer. Any ideas ??
Thanks for your time
Which recovery do you have, think that Philz have sideload option. Go to recovery, select sideload and transfer rom from pc to sd and then flash.
BionicOverload said:
Hey guys need a bit of help. I have a HTC One X (Endev) running Cyanogenmod 10.1.2. My phone started to dislike certan apps and woukldnt let them run, I though great, A good reason to update Cyanogenmod. Now hgere is where the problem comes in. I connected usb Storage on my comp and deleted EVERYTHING from the SD card. Now I have no access the the SD card on the Phone or the computer. Any ideas ??
Thanks for your time
Click to expand...
Click to collapse
If you use windows pc, go to Control Panel and find Auto Play, in that you can find "Device" and changed setting " Ask me every time". If so when you connect the device with PC windows will pop up waning for "Formatting Disk" and just chose "cancel" only.
snebojsa said:
Which recovery do you have, think that Philz have sideload option. Go to recovery, select sideload and transfer rom from pc to sd and then flash.
Click to expand...
Click to collapse
I have Philz Recovery. I will take a look at this now
virgolib said:
If you use windows pc, go to Control Panel and find Auto Play, in that you can find "Device" and changed setting " Ask me every time". If so when you connect the device with PC windows will pop up waning for "Formatting Disk" and just chose "cancel" only.
Click to expand...
Click to collapse
Unfortunately cannot find device in autoplay at all
UPDATE: @snebojsa, Cannot seem to find a sideload option. if this helps when I go onto the Advanced menu on Philz Recovery I get an option saying datamedia not supported. Also for future reference I can still turn on my phone and use it etc but USB PC Connection doesnt work and SD card doesnt show
BionicOverload said:
I have Philz Recovery. I will take a look at this now
Unfortunately cannot find device in autoplay at all
Click to expand...
Click to collapse
Windows7 ??
virgolib said:
Windows7 ??
Click to expand...
Click to collapse
Yeah, Win 7 PRO 64 Bit
BionicOverload said:
Yeah, Win 7 PRO 64 Bit
Click to expand...
Click to collapse
OK Open control panel and at upper right there will be "Veiw By", change to "Large Icons" and you can find easily "Auto Play".
BionicOverload said:
I have Philz Recovery. I will take a look at this now
Unfortunately cannot find device in autoplay at all
UPDATE: @snebojsa, Cannot seem to find a sideload option. if this helps when I go onto the Advanced menu on Philz Recovery I get an option saying datamedia not supported. Also for future reference I can still turn on my phone and use it etc but USB PC Connection doesnt work and SD card doesnt show
Click to expand...
Click to collapse
So you didn't wipe the system, you can boot into rom and use phone? I thought that you wiped everything and have no rom on sd card to flash, that's why i told you to go to recovery and transfer rom to sd from sideload and flash, obviously you have some other problem.
Just go into recovery and format the sdcard then mount the sdcard in the mounts and storage menu ! Why so difficult
That's what i meant
Sorry, This is going to sound completely noobish but how do I format the SD card in recovery ??
Edit: Found the format etc, when I go to format it says error mounting /sdcard
UPDATE: I dont know how this worked but I reinstalled stock recovery OTA and my problem has resolved its self. Thanks for all of the advice guys
Nice :thumbup:
Hi everyone!
I was looking around for an app that could share my SD card with a computer via USB Mass Storage protocol, but no success. There were apps for other phones, but they didn't work for my phone :/ So I've created something for my own, and I hope it will work for your phones too. My app works only for external SD card.
REQUIREMENTS
* Rooted Samsung Galaxy SIII Mini (GT-i8190). This app may work for other devices too, but I can not guarantee that.
I have tested it against:
* Android 4.1.2, firmware JZO54K.I8190XXAMD3
* Windows XP SP3
* Windows 7 64-bit
Not working on:
* CM 10.1
KNOWN ISSUES
* USB PC Connection will still display MTP/PTP mode, even if the mode is Mass Storage. I could fix that issue, but this will require permanent configuration changes, which I would like to avoid.
* Other USB modes (especially ADB) are disabled during UMS mode. This can not be overcome.
USAGE
* Launch the application, click Enable UMS. This will unmount your external SD card from the device, and when the card is unmounted, app will switch USB mode. You should see two new drives appearing in My Computer window. On the second one, your SD card data should appear.
* When you are done, eject (unmount) the drive in Windows.
* Click Disable UMS. This will switch USB to the state it was before enabling UMS, so MTP/PTP mode, as well as ADB will be back. Then, your SD card will be mounted in the phone. An MTP Application prompt may appear, asking to restart MPT application. You may answer what you wish
IMPORTANT NOTES
* Never mount SD card in the phone (Settings->Storage->Mount SD card) while it is shared with a computer. This will cause the card filesystem to be mounted concurrently by two operating systems, and for sure cause data lost.
* Always eject (unmount) the card from a computer before disabling UMS.
* It seems that results (especially glitches and hangs) vary depending on the SD card you are using. See this post by myself.
HELP, THERE'S SOMETHING WENT WRONG
* You may restart your phone. The app does not make any permanent configuration changes, so it's the safest option.
* Restart your computer.
* Unplug and replug USB cable.
* You may try to disable USB, wait for several seconds, then either enable it again, or from the system USB PC connection app, change the mode to PTP, and back to MTP. Be patient, and wait before performing next operation.
* Be patient. From time to time, the computer takes a lot of time to detect device going back from UMS to MTP/ADB.
* App not working. Describe the symptoms (app crash, phone crash, computer crash, nothing changes, etc), your device details (operating system version and build) and attach logcat (adb logcat -d -v long > filename.txt) logs.
P.S.
I would kindly ask moderators to move this thread to the appropriate subforum, if it is already not. Since I'm newbie, I can not post to Developer's forum. Thanks
404 Error. Please upload again
burak185 said:
404 Error. Please upload again
Click to expand...
Click to collapse
+1
burak185 said:
404 Error. Please upload again
Click to expand...
Click to collapse
There's something strange going on...
Please find attached app, I hope it will download
Edit: Still 404, since I can not paste external links (newbie), try http colon slash slash bogus.ovh.org slash UMSShare.apk
I tried UMS on XP and W7 but he did not work for me.When I want copy something, he says "copy..." and nothing happens.
sasa g said:
I tried UMS on XP and W7 but he did not work for me.When I want copy something, he says "copy..." and nothing happens.
Click to expand...
Click to collapse
Do you copy from the SD card, or to the SD card?
If you copy from, have you tried opening some files directly from the SD card? Do they open?
If you copy to the SD card, did you unmount it in Windows before disabling UMS?
I have just tried copying in both directions, and files do copy properly.
Hi f_ranek
App is working well, but hungs PC copying from PC to SD and vice versa with files more than 690 Mb, hope you could fix it, it will be very usefull, well known advantages from ums mode.
Thanks for your job.
Do not go on CM10
"Unfortunately the application was closed"
f_ranek said:
Do you copy from the SD card, or to the SD card?
If you copy from, have you tried opening some files directly from the SD card? Do they open?
If you copy to the SD card, did you unmount it in Windows before disabling UMS?
I have just tried copying in both directions, and files do copy properly.
Click to expand...
Click to collapse
From PC to SD card. PC says "copy...." and nothing happens.
Thanks
orwell 1950 said:
App is working well, but hungs PC copying from PC to SD and vice versa with files more than 690 Mb
Click to expand...
Click to collapse
sasa g said:
From PC to SD card. PC says "copy...." and nothing happens.
Click to expand...
Click to collapse
Actually, there seem to be some timeout issues. For instance, first I tried copying big files, and it seemed that everything hung, with strange Windows messages. So I disconnected USB cable, disabled and reenabled USM mode, and replugged USB. Then, I copied 40 MB to my SD card, but before the copying starts, I had to wait for a quite long time (about 30-60 seconds). But, surprisingly, after copying that 40 MB file, I have copied 80 MB file, 200 MB file and 700 MB file without any troubles and additional waiting! And they play well on the device. For your record: I was using Win XP SP3, and Total Commander 6.53. Tomorrow I'll try on Win7 64bit.
I'll try to tune a little the configuration, but have no idea if this will change something.
Chameleon. said:
Do not go on CM10
"Unfortunately the application was closed"
Click to expand...
Click to collapse
First of all, you are using quite unsupported by operating system. CM is Android, but is very different from the stock one, that device manufacturers put on their devices. Now, I have no plans for supporting CM - maybe find an app dedicated for CM, or ask CM developers to put back UMS mode natively, without any hacks. Because yes, UMS is still there, but hidden in UI, and all that UMS apps are doing is just guessing where and how, and hacking your OS.
Second, if you are using CM, it means that you are quite powerfull user. And I hope can read with understanding to install CM. So please read my post, and attach logcat (adb logcat -d -v long > filename.txt) logs. Sorry for my irony, but if you want to get help, you must first make a little effort.
f_ranek said:
First of all, you are using quite unsupported by operating system. CM is Android, but is very different from the stock one, that device manufacturers put on their devices. Now, I have no plans for supporting CM - maybe find an app dedicated for CM, or ask CM developers to put back UMS mode natively, without any hacks. Because yes, UMS is still there, but hidden in UI, and all that UMS apps are doing is just guessing where and how, and hacking your OS.
Second, if you are using CM, it means that you are quite powerfull user. And I hope can read with understanding to install CM. So please read my post, and attach logcat (adb logcat -d -v long > filename.txt) logs. Sorry for my irony, but if you want to get help, you must first make a little effort.
Click to expand...
Click to collapse
Thank you very much, inadvertently, this application works on 4.1.2 original stock
Hi everybody!
Recently I did some test with Windows 7 64 bit. The tests were performed on fresh system (the phone was plugged for the first time), the phone was plugged directly (no USB Hub down the line), and I've always switched to UMS before plugging the cable.
If you don't want to read such a long post, skip to the emboldened bottom line.
First, I've tested my regular SD card, 2 GBs labeled Kingston. I've copied 1 GB of files from the SD card to the computer, without any trouble and at average speed of 14 MB/s. Then I wanted to delete those files. After selecting them, and hitting Shift-Delete, I got delete progress dialog, which hung up leaving 1 file (out of 6) undeleted. At this point, access to SD card seemed to hung. I was unable to cancel the operation and close the dialog, as well as refreshing of the My Computer window took significant period of time. So I decided to unplug the USB, and replug it again. After that I noticed, that the files I wanted to delete are gone. Then, I copied back 700 MB file to the SD card. The copying avg speed was 3-4 MB/s, and the CPU utilization window (see here: http://forum.xda-developers.com/showthread.php?t=1495763) showed big blue bar.
Second, I replaced the SD card with another 2 GBs, labeled Japan. Then I copied 3 files (40 + 80 + 30 MB - no more space available, and no unnecessary files to delete) to the card. The copying was smooth, with little glitches before or after each file copying. The avg speed was 10-12 MB/s, and the device haven't indicate increase CPU load (neither green nor red or blue bars). Then, I tried deleting several files in a row from a directory, still without any glitches.
Edit: testing now, on Win XP, and through USB hub (does it matter?) does not work so perfectly well :/ I got one hang during folders deletion, and quite a long glitch before copying of several folders started.
Third, unlabeled 2 GB card sold (probably) with Nokia 6303i. First, I wanted to browse file system on the device. The performance was really bad, I was only reading files and traversing directories. Suddenly, all the file names changed to random characters (no writes performed by myself), and the phone indicated file system error, and unmounted the card. When I tried to share it with PC, windows said that the card is not formatted. The same phone, when trying to mount it back. The card can't be read neither on Nokia 6300.
Last, but not least - unlabeled 128 MB card got with my Nokia 6300 back in 2008. The phone indicated unformatted card, or unsupported file system. The same with Windows 7 accessing it with UMS, and Windows XP accessing it from the SD card reader. But, the card can be still read by my Nokia 6300, however, it's name is a little crapped. Moreover, I can access it from Windows XP using that Nokia in UMS mode!
So, the bottom line is
everything seems to depend on the SD card you are using.
Another story: the same micro SD card accessed via UMS in Nokia 6300 - very good performance, accessed via SD card reader with micro SD adapter - terribly bad performance. Another SD card accessed via the same SD card reader - very good performance. So as you can see, the same SD card, different reading devices - different effect. The same reading device, different cards - different effect.
Im not able to install on stock 4.1.2 i get problem parsing the package
Hi XDA,
I'm struggeling with my SD-Card after moving to lineage 14.1 (Coming from CM 13).
Installation worked just fine, but now i can not access my SD-Card from the phone and even not from PC (over the phone). I mounted it as an internal drive on CM to extend my storage.
The System recognizes the Card, but only gives me the options to format the Card and use it as internal storage or format and use it as an external storage.
Could it be, that the Card cannot be used, because it was formated as an internal storage under CM 13?
If anybody has an Idea, how i get access to the files please tell me
subersauger said:
Hi XDA,
I'm struggeling with my SD-Card after moving to lineage 14.1 (Coming from CM 13).
Installation worked just fine, but now i can not access my SD-Card from the phone and even not from PC (over the phone). I mounted it as an internal drive on CM to extend my storage.
The System recognizes the Card, but only gives me the options to format the Card and use it as internal storage or format and use it as an external storage.
Could it be, that the Card cannot be used, because it was formated as an internal storage under CM 13?
If anybody has an Idea, how i get access to the files please tell me
Click to expand...
Click to collapse
Maybe this can help.
Decrypt_adopted_storage
Sotiris02 said:
Maybe this can help.
Decrypt_adopted_storage
Click to expand...
Click to collapse
Sadly not, I wiped all Data (except SD-Card) due to install the new System. So thers no Key in "/data/misc/vold"
subersauger said:
Sadly not, I wiped all Data (except SD-Card) due to install the new System. So thers no Key in "/data/misc/vold"
Click to expand...
Click to collapse
I think you can't do anything now..
Only formatting it via PC(using command prompt..)
Sotiris02 said:
I think you can't do anything now..
Only formatting it via PC(using command prompt..)
Click to expand...
Click to collapse
That would be worst case. :/
subersauger said:
That would be worst case. :/
Click to expand...
Click to collapse
In the past while i was having a Moto G3,i got it to Marshmallow,made the SD card Internal like and about a month i got it stolen.But the good point was that i had removed the SD card.
Checked Google nothing useful.
Asked Motorola for any decryption tips,Nothing useful from Motorola.
And i couldn't stay with a encrypted SD card.. I formatted it(after making the "big choice" and it was back to factory stats..)
But the only thing that i didn't do,is that i didn't ask Google for support. Because Motorola makes pure stock Android but with some of Motorola apps and features.
As you was in AOSP based ROM (even if you was to LG's stock,Google could help) go ask Google gently for any solution(if you had important files,then surely they will help)
haha i had the same problem but the solution is very very easy just reboot into your recovery open recovery file manager and delete Android secure folder in your SD card.
thats all you need
axelxxxxx said:
haha i had the same problem but the solution is very very easy just reboot into your recovery open recovery file manager and delete Android secure folder in your SD card.
thats all you need
Click to expand...
Click to collapse
Deleting "Android Secure" folder (there is no such a folder even in hidden files) won't do anything.
Also a thing that you should learn.(Because it seems you don't)
When your SD card is formated as internal you can't access it via TWRP a PC or even an other phone.
Because it gets encrypted.
Have a nice day.
Sotiris02 said:
Also a thing that you should learn.(Because it seems you don't)
When your SD card is formated as internal you can't access it via TWRP a PC or even an other phone.
Because it gets encrypted.
Have a nice day.
Click to expand...
Click to collapse
Yea, i did not know that. If i had, i would have made an SD Backup
But I still have not formated the SD Card, I am still hoping :fingers-crossed:
subersauger said:
Yea, i did not know that. If i had, i would have made an SD Backup
But I still have not formated the SD Card, I am still hoping :fingers-crossed:
Click to expand...
Click to collapse
It cant be undone. Sorry to say. I learned this the hard way also. When you put it in lineage, you remember it asking about how you wanted to format it (movable or integrated)
You chose integrated mode. That encrypted it and counted it as device storage. No unencrypting it. Also if you blew away that lineage install, its totally not able to be read anymore. It stored the only decrypt key in the lineageOS keystore.
sad times.
Sotiris02 said:
Deleting "Android Secure" folder (there is no such a folder even in hidden files) won't do anything.
Also a thing that you should learn.(Because it seems you don't)
When your SD card is formated as internal you can't access it via TWRP a PC or even an other phone.
Because it gets encrypted.
Have a nice day.
Click to expand...
Click to collapse
Ah yes u right but you can access it as internal. Recvery will ecognise it anyways and you can delete this folder...
Btw this worked for me i had the same problem. And NO there is the folder named "Android secure" definition-- Android.secure is the folder where stock froyo android moves apps to the sd card by default. If you don't use the apps presently, you can safely remove the corresponding app files from the android.secure folder.
Hi all
I successfully updated to the latest nightly build 8/3/17 how ever I have no ability to move app data to my SD card. My sd card is seen under storage and I have files on it.
I also have twrp 3.0.2.0 but get a kernel is not seandroid enforcing error and can't charge whilst off. I have no loop issue the unit work's OK otherwise.
The lineage is rooted, I would welcome any advice.
Regards Sok
Sorry all the model is a SM-P605 model.
I can't even access my SD card.
k-semler said:
I can't even access my SD card.
Click to expand...
Click to collapse
Interesting if you boot into trwp can that see your sd card? So under storage the sd card isn't visible at all? Have you tried formatting it?
kypreo said:
Interesting if you boot into trwp can that see your sd card? So under storage the sd card isn't visible at all? Have you tried formatting it?
Click to expand...
Click to collapse
Yes, I can see it fine under TWRP. I thought maybe it couldn't recognize exFAT, so I formatted it to EXT4. But it's still not showing up at all.
k-semler said:
Yes, I can see it fine under TWRP. I thought maybe it couldn't recognize exFAT, so I formatted it to EXT4. But it's still not showing up at all.
Click to expand...
Click to collapse
That is weird, do you have another android peripheral that you could prospectively format the card in and try? Alternatively you could wipe and reinstall. I blew away the android internal storage and installed from my SD, just about everything works except the sd storage option. That's an issue storage and app wise so I may go back to marshmallow lineageos if I can't sort it.
Failing that back to stock lollipop should that fail.
kypreo said:
That is weird, do you have another android peripheral that you could prospectively format the card in and try? Alternatively you could wipe and reinstall. I blew away the android internal storage and installed from my SD, just about everything works except the sd storage option. That's an issue storage and app wise so I may go back to marshmallow lineageos if I can't sort it.
Failing that back to stock lollipop should that fail.
Click to expand...
Click to collapse
I don't have another android device, but I do have a linux machine, (actually, I only run Linux in my home), and I can read and write the card no problem in my desktop machine. I haven't tried it on my HTPC/Plex server yet, but I don't see why it wouldn't work. On stock Lollipop, I can see the card, but it's read only. Oh, I should have been clearer. I can see the card on the tablet, but it doesn't display anything. It says "contents not found", and I can't enable writing to it for Root Explorer.
k-semler said:
I don't have another android device, but I do have a linux machine, (actually, I only run Linux in my home), and I can read and write the card no problem in my desktop machine. I haven't tried it on my HTPC/Plex server yet, but I don't see why it wouldn't work. On stock Lollipop, I can see the card, but it's read only. Oh, I should have been clearer. I can see the card on the tablet, but it doesn't display anything. It says "contents not found", and I can't enable writing to it for Root Explorer.
Click to expand...
Click to collapse
That is weird you got me stumped, other than a rebuild I got nothing. Try the card in a mate's phone if possible better than wiping the unit first.
If that doesn't work I got nothing. Truth be said I'm no expert, I try my best.
Hi all
I updated the Lineageos ROM the AOSP I had no hardware issues or software issues on the OS. However please note that if you use this ROM for some reason you will lose the TWRP Recovery.
I installed the AOSP ROM 7.1.1 first, didn't reboot and then installed the Gapps file, upon reboot it stayed on the splashed screen, so I then booted into the standard recovery and wiped/factory reset the unit, all good since and it is running smoothly, just wanted you to let you know that the Lineage ROM isn't the only option.
I also had the options for the SD card and UI System tweak was also there, good luck. If anyone wants assistance I am happy to assist.
Soks
k-semler said:
I don't have another android device, but I do have a linux machine, (actually, I only run Linux in my home), and I can read and write the card no problem in my desktop machine. I haven't tried it on my HTPC/Plex server yet, but I don't see why it wouldn't work. On stock Lollipop, I can see the card, but it's read only. Oh, I should have been clearer. I can see the card on the tablet, but it doesn't display anything. It says "contents not found", and I can't enable writing to it for Root Explorer.
Click to expand...
Click to collapse
Hey mate I found an alternate fix and everything works, look at AOSP rom and let me know if you have any questions.
Soks
I have also a problem with the SD card. I have the newest build and the SD card is seen in the settings and also in file manager can read/write, but other apps somehow don't see it, I cannot set the camera to save photo to external storage, also in Google play music I cannot choose to store music to external card, the options are not there. On my Galaxy S5 also with Lineage it works perfectly. Secondly, in the settings I can only format the SD card as portable, not as internal, but that would not bother me if the apps would see the card and I could use it as storage.
Solution for sd card write issue?
Did you ever find a solution? I have the same devices and exactly the same problems.
SD card not properly configured
Astagor said:
I have also a problem with the SD card. I have the newest build and the SD card is seen in the settings and also in file manager can read/write, but other apps somehow don't see it, I cannot set the camera to save photo to external storage, also in Google play music I cannot choose to store music to external card, the options are not there. On my Galaxy S5 also with Lineage it works perfectly. Secondly, in the settings I can only format the SD card as portable, not as internal, but that would not bother me if the apps would see the card and I could use it as storage.
Click to expand...
Click to collapse
Have the same problem on my SM-P605 - have had problem since at least the 20170713 nightly build when I started using LineageOS (am currently running 20170830 nightly).
The SD card appears under settings - I can format and eject the SD card, it appears under /mnt/media_rw/76AC-17ED, but
doesn't appear as a SD card in Amaze file manager
doesn't appear as a SD card in ESExplorer (only Internal Storage appears on the home page)
I cannot set the camera location to save photos on it
doesn't appear under /storage (i.e. /storage/76AC-17ED)
It's as if the storage is mounted, but isn't flagged as being a SD card.
Any ideas -- anyone??
snappple said:
Any ideas -- anyone??
Click to expand...
Click to collapse
Have created an issue - 1026 - https://jira.lineageos.org/browse/BUGBASH-1026
kypreo said:
Hi all
I successfully updated to the latest nightly build 8/3/17 how ever I have no ability to move app data to my SD card. My sd card is seen under storage and I have files on it.
I also have twrp 3.0.2.0 but get a kernel is not seandroid enforcing error and can't charge whilst off. I have no loop issue the unit work's OK otherwise.
The lineage is rooted, I would welcome any advice.
Regards Sok
Click to expand...
Click to collapse
I think I found a solution your problem. Well, it worked for me.
Firstly I backed up my SDCARD
Then went to Settings, Storage Settings tabbed on SD card and tab on options [three dotted things].
Formatted my sd card as internal, when I went back to my applications there was an option to move them to external.
[WARNING]One problem is that if you format it as internal it will not show as different storage systems on your pc WILL SHOW AS SHARED STORAGE!!!!
******** I Had So Many Issues I Would Not Recommend It *********
Hope that helps you
Blakepaige said:
I think I found a solution your problem. Well, it worked for me.
Firstly I backed up my SDCARD
Then went to Settings, Storage Settings tabbed on SD card and tab on options [three dotted things].
Formatted my sd card as internal, when I went back to my applications there was an option to move them to external.
Click to expand...
Click to collapse
Thanks for the suggestion - but didn't work.
When I click the three-dotted-things only option I see is (under Storage settings) is "Format". I format the card - but still cannot move apps to it or set as camera location.
snappple said:
Have the same problem on my SM-P605 - have had problem since at least the 20170713 nightly build when I started using LineageOS (am currently running 20170830 nightly).
The SD card appears under settings - I can format and eject the SD card, it appears under /mnt/media_rw/76AC-17ED, but
doesn't appear as a SD card in Amaze file manager
doesn't appear as a SD card in ESExplorer (only Internal Storage appears on the home page)
I cannot set the camera location to save photos on it
doesn't appear under /storage (i.e. /storage/76AC-17ED)
It's as if the storage is mounted, but isn't flagged as being a SD card.
Any ideas -- anyone??
Click to expand...
Click to collapse
I did not find a solution. For other reasons I have returned to the stock OS. Now I don't use this tablet anymore.
Same here... i formated internal but nothing changed. file manager seeing sd card but app can't see and can't save downloaded contents to sd card.. camera, udemy, vs... cant use sdcard
-------
I see it under "Portable storage" under "Storage settings". I can format it and eject it, and it appears under /mnt/media_........ However
does appear as a SD card in ESExplorer (only Internal Storage appears on the home page)
I cannot set the camera location to save photos on it
I cannot move apps to the SD card
I can access the information on the card, but cannot use it as a SD card (with the camera or by moving apps to it).
Please assist.
Manual Fix
Hi.
I just got it running on Samsung Galaxy Note 10.1 2014 Edition (LTE).
This guide worked for me: modaco.com / news / android / heres-how-to-configure-adoptable-storage-on-your-s7-s7-edge-r1632
Guide also referenced in this German HowTo: androidpit.de / micro-sd-als-internen-speicher-formatieren
I did the 50:50 format on my 200GB SD card.
Please remove the blanks in the links. Had to put them in because forum software did not allow me to include links.
Regards,
buggy82