Related
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Nipit said:
Hello, I have bricked my S8500. I can go to the download menu. The problem is that I can't install properly USB drivers , or maybe it is USB cable that is wrong, the USB cable is from nokia and model is : CA101. Even when the phone was working ok computer couldn't see my wave , and I don't know why... So the problem is that when I go to the Download menu my computer detects all the drivers and everything is alright... And when I hit download I get this.
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
And after Wait reset my computer just didn't recognize my phone anymore, and that's why it has been bricked at the begining. Could anyone please help me? I tried different USB drivers, different PC. Nothing helps :{{{ Please guys, help me.
Maybe it is because my USB cable isn't from original wave, or no?
Click to expand...
Click to collapse
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
No, I wasn't able to connect to kies. I got a USB cable from original xperia x10, still same issue... Can someone tell me what to do? I downloaded a lot of drivers, but maybe there is some special driver? :/
The problem usually goes away for me when flashing from a freshly booted pc, so try restarting one of your computers for flashing and try again.
Have done that too... Any advice? :/
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
---------------------------------------------
Just after this message, without quit Multiloader:
Phone on DOWNLOAD MODE try this:
Uncheck Boot, unplug USB Cable from Phone and Plug it again, You will see Download actived in Multiloader, Just clic on DOWNLOAD. And your Flashing will be continued....
----------------------------------------------
Sory For my english.
Still the same **** :{{{ Anymore advices guys?
Darkminus said:
Hello!
First kill all Kies Processes (in the Task Manager)
Second launch Multiloader and try to flash
When it says Serial Error, just do Port Search again, and it should work
That's what I did when I had my Serial Port error ^^
Hope I helped you
Click to expand...
Click to collapse
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Nipit said:
Download Start Ch[0]
BootLoader 1703.9KB OK[0.7s]
Dbl 281.5KB OK[0.8s]
Wait reset !!
Serial port detect error!
Click to expand...
Click to collapse
Same thing happened to me. After this, you shouldn't disconnect you wave, but to wait, and click search port again. If there is no port again, tru with different multiloader (mine was v5.65), and there is again same problem, try with another computer with preinstalled USB drivers.
The good thing is that your phone still enters boot mode. If it wasn't the case, then it would be a total brick.
Best regards
Nipit said:
You didn't understand me very well. The problem is that when I hit download my computer suddenly loses USB connection and shows my phone as unknown device, that is the problem why I bricked my phone. Do anyone knows how to make my pc see my samsung wave?
Click to expand...
Click to collapse
No, you didn't understand this flashing process. Most important thing here is to avoid interrupting of connection between computer and phone, even in serial port error. You need to search port again, or to change things that I mentioned above.
You hit download, then bootloader is loaded. It is absolutely normal in this algorithym to reset phone (wait reset). Then our error appears in port error. That is the time when you should click port search again, and when it finds it again (it will) click download button. Thats how it was in my case already 4 times.. Hope I helped.
Best regards
I have told that I reinstalled a lot of drivers and tried different PC's, nothing helps. I tried about 3 or 4 versions of multiloader still same result :/ I don't know what to do anymore... Please any advices? Maybe someone had the same issue?
I don't really know what happened. We switched our cables with my friend again, and I tried to flash with Nokia cable. And everything went okay for the 1 time. No errors, no nothing, no Unknown USB device problem. This is really strange. Thank you for you help friends :}
datta.ca said:
I too use Nokia table to flash my samsung wave. If your phone was able to connect to Kies prior to flashing there should be no issues.
When you flash for 1st time you always get that error. Pls try once again and you shd not face any issues.
Datta
Click to expand...
Click to collapse
i have bricked my s5330 please help
no download mode or even recoverymode please help
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
[email protected] said:
I got the same problem too. Windows detects it as Unknown device.
Anyway to fix it? :crying:
Click to expand...
Click to collapse
Try to install driver manually from windows driver menu
Just installed "S8500-Driver-V5_02_0_0" now it's working since I wanted to flashback my friend's Wave from Bada2 to v1
So I used ROMmanager to get clockwork recovery mode. Now when my phone entered the recovery mode it just say:
"Fastboot mode started"
"udc_start()"
If i connect my USB cable to it it says --suspend--
Now i tried using KDZ_FW_UPD in Emergency mode to restore original firmware but it cant find the phone. The log is:
[R&D Test Tools Log File]
10:50:59 : Launching SW update
10:50:59 : Unpacking KDZ
10:51:14 : KDZ file extraced
10:51:17 : Files were extracted.
10:51:17 : LGMobileDL Load.
10:51:17 : Port = -1
10:51:17 : Connecting to phone
10:51:17 : PHONE WAS NOT FOUND!
10:51:19 : ===FINISHED===
I tried this procedure on 2 pcs but no luck. It seems that my phone can't connect to PC with usb cable.
I installed LG Moblie United drivers and disabled the lg modem thing in device manager. I am using Windows xp Proffesional SP3.
So does anyone has any clue what I am doing wrong ? If u need more info just ask.
Maybe if I try from some linux distro it will detect my phone ? But what tools to use then ?
Use fastboot to recover the phone. Check the wiki at the Troubleshooting section.
---------- Post added at 03:31 PM ---------- Previous post was at 03:12 PM ----------
I recommend using drivers latest version. Last time I checked, United Mobile Driver was version 3.7.2 release 4.9.8.1 and Modem Link Driver was 1.0. I'm providing links for download from my personal Dropbox folder because I don't remember from which LG site I downloaded them from.
Vangoda said:
So I used ROMmanager to get clockwork recovery mode. Now when my phone entered the recovery mode it just say:
"Fastboot mode started"
"udc_start()"
If i connect my USB cable to it it says --suspend--
Now i tried using KDZ_FW_UPD in Emergency mode to restore original firmware but it cant find the phone. The log is:
[R&D Test Tools Log File]
10:50:59 : Launching SW update
10:50:59 : Unpacking KDZ
10:51:14 : KDZ file extraced
10:51:17 : Files were extracted.
10:51:17 : LGMobileDL Load.
10:51:17 : Port = -1
10:51:17 : Connecting to phone
10:51:17 : PHONE WAS NOT FOUND!
10:51:19 : ===FINISHED===
I tried this procedure on 2 pcs but no luck. It seems that my phone can't connect to PC with usb cable.
I installed LG Moblie United drivers and disabled the lg modem thing in device manager. I am using Windows xp Proffesional SP3.
So does anyone has any clue what I am doing wrong ? If u need more info just ask.
Maybe if I try from some linux distro it will detect my phone ? But what tools to use then ?
Click to expand...
Click to collapse
i had the same problem few days back... (ROM Manager sucks).... ok.. so.. before connecting the phone to the PC.. remove the battery, press both the volume keys (no need to press the power button)... and connect the usb.. now the cell phone will be in emergency mode.. try launching the software with kdz updater now... it should detect it.. after its detected.. connect back the battery (without disconnecting the USb cord ofcourse)... hope this works.. good luck
Good tip, adding to wiki later...
Sent from my LG-P350 using Tapatalk 2
http://multidroid2.feed.nu/2012/03/27/how-to-unbrickflash-your-optimus-melg-p350-2/
Nothing new to what's already posted in the wiki...
response
madmanzrocks said:
i had the same problem few days back... (ROM Manager sucks).... ok.. so.. before connecting the phone to the PC.. remove the battery, press both the volume keys (no need to press the power button)... and connect the usb.. now the cell phone will be in emergency mode.. try launching the software with kdz updater now... it should detect it.. after its detected.. connect back the battery (without disconnecting the USb cord ofcourse)... hope this works.. good luck
Click to expand...
Click to collapse
Didn't I said i did that ? My PC wont recognize my phone in fastboot or emergency mode, with fastboot being stuck at udc_start() and when i connect USB it says "-- suspend --" ,
I tried this guide madmanzrocks still dont see phone.
deleted lg modem, reinstalled all usb hubs, tried 10 versions of LGunited drivers, used both official update tool and kdz nothing works(can't detect phone), and also tried from cmd.
My problem isn't how to unbrick but rather why my pc won't recognize my phone :/
So, no feedback (USB Device connected sound) when conneting the phone? I assume you have tried all ports available.... Long shot, but maybe the phone's USB connector is dead... You have some background on electronics? If so, you can follow the service manual I reposted recently at the General section to check if the connector is gone (p. 113).
dbarrera said:
So, no feedback (USB Device connected sound) when conneting the phone? I assume you have tried all ports available.... Long shot, but maybe the phone's USB connector is dead... You have some background on electronics? If so, you can follow the service manual I reposted recently at the General section to check if the connector is gone (p. 113).
Click to expand...
Click to collapse
yeah tried all ports, I¨ll try on several other pc's. no connection sound, but phone is charging. I have quite some background on electronics so ill check it out when i try this on couple others pc's. Don't want to dissaemble it quite yet and if it rly is dead repair will probably take more money then i spent to buy it(I got it 2nd hand for around 50 $). It happened before that my PC coudn't recognize some devices but never like this. I ussualy get device not recognized, malfuctioned or smthing like that .
Vangoda said:
yeah tried all ports, I¨ll try on several other pc's. no connection sound, but phone is charging. I have quite some background on electronics so ill check it out when i try this on couple others pc's. Don't want to dissaemble it quite yet and if it rly is dead repair will probably take more money then i spent to buy it(I got it 2nd hand for around 50 $). It happened before that my PC coudn't recognize some devices but never like this. I ussualy get device not recognized, malfuctioned or smthing like that .
Click to expand...
Click to collapse
as I mentioned the same problem was solved bu connecting the cell phone with the battery removed. But if even that doesnt works for you, then maybe there is a fault in your PC. Does your PC instantly recognizes USB Pendrives? And which OS are you using?
madmanzrocks said:
as I mentioned the same problem was solved bu connecting the cell phone with the battery removed. But if even that doesnt works for you, then maybe there is a fault in your PC. Does your PC instantly recognizes USB Pendrives? And which OS are you using?
Click to expand...
Click to collapse
I'm using Windows XP Proffesionall, all the other usb devices at least give a message if my PC can't recognize them. You know that yellow box that pops out saying device malfuctioned or smthing like that.
Hey, i have the same problem, and i also can' t fix it, i tried all ways, but my pc dont detect my phone... so i hope that someone will find a way how to fix it... but it' s not normal what is happening with this phone...
Don't know if it helps or you already tried it.
Start fastboot v2 and start the flash so it waiting for device.
Then plug in usb and start phone in fastboot.
That worked for me before.
Sent from my LG-P350 using xda app-developers app
powerdust said:
Don't know if it helps or you already tried it.
Start fastboot v2 and start the flash so it waiting for device.
Then plug in usb and start phone in fastboot.
That worked for me before.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
Can you please describe step by step, how to do this? maybe it works...
nr4400 said:
Can you please describe step by step, how to do this? maybe it works...
Click to expand...
Click to collapse
I can try.
First start fastboot v2 on your computer.
Load the recoveryimage amonra or cwm5 (not cwm6)
Start flash so it say searching for device.(or something like that)
Plug in usb in computer.
Start your phone in fastboot.
Plug in usb in phone.
If that don't work you can try to instead of start phone first start it with usb cable.
Can need to unplug usb and plug it in a few times if the device say suspend.
Hope it helps.
Sent from my LG-P350 using xda app-developers app
powerdust said:
I can try.
First start fastboot v2 on your computer.
Load the recoveryimage amonra or cwm5 (not cwm6)
Start flash so it say searching for device.(or something like that)
Plug in usb in computer.
Start your phone in fastboot.
Plug in usb in phone.
If that don't work you can try to instead of start phone first start it with usb cable.
Can need to unplug usb and plug it in a few times if the device say suspend.
Hope it helps.
Sent from my LG-P350 using xda app-developers app
Click to expand...
Click to collapse
Can you please add the links to this files or the files? I would be very thanksful...
Up to this point i tried all the methods you guys told me and some i found myself. Nothing worked for me as my PC stil won't recognize my phone, I have also tried all this methods on 4 PCs(2 had windows XP Proffesional SP3 with all the updates, and 2 had Windows 7 SP1 with all the current updates installed(note that 1 version was 32-bit and other was 64-bit).
My conclusion is that the USB connector is DEAD, even thought i can still charge my phone trough it. I probably won't be trying to fix this anymore as I've found an 4th gen iPod and i'll be using that from now on.It is true that i can't make calls(at least not the standard way, you know, it doesn't support SIM cards), but i have my old dumbphone phone for that and this will be used for just about anything else.
So thanks to all of you guys that tried to help me but i fear this is unrepairable. If anyone want's this phone I'll give it to you for free so you can have some fun cracking your head to see what is wrong . I only ask that if you find a way to fix it you post it here and notify me about it(send me pm).Otherwise do whatever you with it.
I have solution
Vangoda said:
So I used ROMmanager to get clockwork recovery mode. Now when my phone entered the recovery mode it just say:
"Fastboot mode started"
"udc_start()"
If i connect my USB cable to it it says --suspend--
Now i tried using KDZ_FW_UPD in Emergency mode to restore original firmware but it cant find the phone. The log is:
[R&D Test Tools Log File]
10:50:59 : Launching SW update
10:50:59 : Unpacking KDZ
10:51:14 : KDZ file extraced
10:51:17 : Files were extracted.
10:51:17 : LGMobileDL Load.
10:51:17 : Port = -1
10:51:17 : Connecting to phone
10:51:17 : PHONE WAS NOT FOUND!
10:51:19 : ===FINISHED===
I tried this procedure on 2 pcs but no luck. It seems that my phone can't connect to PC with usb cable.
I installed LG Moblie United drivers and disabled the lg modem thing in device manager. I am using Windows xp Proffesional SP3.
So does anyone has any clue what I am doing wrong ? If u need more info just ask.
Maybe if I try from some linux distro it will detect my phone ? But what tools to use then ?
Click to expand...
Click to collapse
I had the same problem
1.You must have LG P350 drivers
2.Install KDZ updater
3.Download LG P350 software (I recommend V10c)
Now I will explaine steps
1.You have to charge your battery to 100% (Just leavit on charger in fastboot mode)
2.When you connect your phone to PC hit Start,go on devices and printers and disable USB Modem (Win 7)
3.Take your phone,get the battery out,then hold vol+ and vol- at the same time and plug in USB cable
4.Then you should see cheesy color screen(emergency mode)
5.Put the battery in
6.Open KDZ updater,put Type:3GQCT PhoneMode:Emergency
7.Browse downloaded software in your PC (V10C)
8.Hit ,,Launch software update"
Then just wait max.20min and your phone reboots that is it my fried
If triangle apears on screen just get the battery out and put back in
Let me how it went,or for help on [email protected]
need help
Help pls,i have LG P350 running froyo 2.2.2,and i changed software with KDZ updater to V10c but now i cant reboot in recovery,on the screen appears ,,fastboot mode start",i think i lost recovery image but i dont know hov to install it again on froyo 2.2.2
Masimo x said:
Help pls,i have LG P350 running froyo 2.2.2,and i changed software with KDZ updater to V10c but now i cant reboot in recovery,on the screen appears ,,fastboot mode start",i think i lost recovery image but i dont know hov to install it again on froyo 2.2.2
Click to expand...
Click to collapse
Read the wiki... RTFM!
Sent from my MB525 using Tapatalk 2
i rooted my lg g3 d 855 lollipop and tried to install TWRP
but it was not a success i lost recovery + download mode but it boots perfectly into android system and can use it normally
to install twrp again i tried to flash it again and again but no success
then i flash aboot.img and it all went blank not booting not rrecovery etc
i tried board diag method to unbrick it shows up in my system as qcomm hs usb 9008
but when using board diag it says DEVICE NOT FOUND IN DLOAD MODE
plz help this is my first android phone after months of hardwork
i dont think i have enough money to replace the mobo or buy a new one:crying:
Hello,
it's recoverable, but you need to read and some knowledge...
Refer to this thread. Proceed point by point and use willcracker boarddiag.
halekhonza said:
Hello,
it's recoverable, but you need to read and some knowledge...
Refer to this thread. Proceed point by point and use willcracker boarddiag.
Click to expand...
Click to collapse
brother i used board diag method it is succesfully able to show my device as qcomm hs usb 9008
and im able extract the files with program
but when i click start after some time it says ap check failed ,device not found in dload mode
i desperately need ur help IM NEW TO XDA FORUMS I HOPE ANYONE WOULD BE ABLE TO SOLVE PROBLEM
tnx in advanc
adilismail62 said:
brother i used board diag method it is succesfully able to show my device as qcomm hs usb 9008
and im able extract the files with program
but when i click start after some time it says ap check failed ,device not found in dload mode
i desperately need ur help IM NEW TO XDA FORUMS I HOPE ANYONE WOULD BE ABLE TO SOLVE PROBLEM
tnx in advanc
Click to expand...
Click to collapse
I understand. I'm just asking if you really using right boarddiag (thread that I mentioned - willcracker.rar)
Also be sure that you have a phone connected to right port (check it in device manager)
halekhonza said:
I understand. I'm just asking if you really using right boarddiag (thread that I mentioned - willcracker.rar)
Also be sure that you have a phone connected to right port (check it in device manager)
Click to expand...
Click to collapse
halekhonza said:
I understand. I'm just asking if you really using right boarddiag (thread that I mentioned - willcracker.rar)
Also be sure that you have a phone connected to right port (check it in device manager)
Click to expand...
Click to collapse
yes im using the r8 port it shows in device manager and in board daig also i gave port 14
before my phone was going to get bricked its battery was low
is it affecting the procedure i think my battery is not charging
when i remove battery and connect to pc phone shows battery not inserted sign when i insert the batery it disappear and no sign of charging
i thought this might help:good:
You have to use the original LG usb cable. Dont try with fake china cables because its a lot possible to have troubles with them.
lumia hard bricked ,i'm connecting to PC ,PC shows unknown device and another time i'm try to connect to PC ,it shows USB device ,PC did't shows qualcomm boot loader,i'm install qualcomm boot loader driver but PC did't recognized my device... please help
more info... which device? did you tried WDRT?
dxdy said:
more info... which device? did you tried WDRT?
Click to expand...
Click to collapse
lumia 820,yes i'm tried WPRT
check this topic, helped me to restore bricked 925
https://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592
(btw, i used hex file from lumiafirmware.com)
@Gokul Rajan, sorry for stupid question but have you tried another USB cable and/or another USB port? Also not too bad to give a try on the another PC before starting flashing your handset...
sensboston said:
@Gokul Rajan, sorry for stupid question but have you tried another USB cable and/or another USB port? Also not too bad to give a try on the another PC before starting flashing your handset...
Click to expand...
Click to collapse
i'm tried 4 more laptops and tried different USB cable but every laptops showed That.... any suggestion you have?
What do you do to brick your phone?
Did you tried Windows Phone Internals?
titi66200 said:
What do you do to brick your phone?
Click to expand...
Click to collapse
Yeah, very reasonable question!
titi66200 said:
What do you do to brick your phone?
Did you tried Windows Phone Internals?
Click to expand...
Click to collapse
i'm tried WPinternals, WDRT,some cmd prompt codes , the main problem is PC didn't shows Qualcomm Bootloder
is not need to show qualcomm bootloader (if i remember).. only imported is to not have conflict in drivers
just use tutorial posted in post #4
also in all tutorials say to use "Drivers_X2_Flash_Emergency" but this not helped to me, i used Drivers_Lumia_WP8x_2016-06.7z (from link in tutorial). have Windows 10 x64 PC
for step 2 download files from lumiafirmware.com
also, is little confusing for step 4 converting bin to hex but i downloaded hex file from lumiafirmware.com and worked for lumia 925...
important steps:
-drivers
-WDRT
-HEX.hex and msimage.mbn
- now you use command (put location and real names for hex and mbn file)
thor2 -mode emergency -hexfile HEX.hex -mbnfile msimage.mbn -orig_gpt
- remove battery
- put battery
- connect phone and you must get red screen on phone (this important)
- flash vpl file (enter location and name where vpl and other downloaded ROM files is)
thor2.exe -mode vpl -maxtransfersizekb 1 -vplfile C:\****************
-when done screen must change to green
- use commend
thor2 -mode rnd -bootnormalmode
and thats all
this lumia phones never been hard bricked! you can fix boot loader without battery too thor is best way to fix bootloader....
fullcontrol said:
this lumia phones never been hard bricked! you can fix boot loader without battery too thor is best way to fix bootloader....
Click to expand...
Click to collapse
how to FIX it
fullcontrol said:
this lumia phones never been hard bricked! you can fix boot loader without battery too thor is best way to fix bootloader....
Click to expand...
Click to collapse
need your help , how to fix it??
Gokul Rajan said:
need your help , how to fix it??
Click to expand...
Click to collapse
Find in pcb testpoint or resistor cpu pin# SDC1_CLK first remove battery and usb cable too. short with ground. SDC1_CLK plugin usb cable and battery u will be see in Device Manager QHSUSB_DLOAD. 90008 com device. then leave to short with ground
Next step Folow this link
dxdy said:
check this topic, helped me to restore bricked 925
https://forum.xda-developers.com/windows-phone-8/development/help-programmer-unbrick-jtag-t3082592
(btw, i used hex file from lumiafirmware.com)
Click to expand...
Click to collapse
(if you have recognized QHSUSB_DLOAD. 90008 com device. You can fix boot with WPinternals try with old versions. 1.1 or 1.0 enginering sbl's unlock bootloader method...)
If not help, possible to failure any components in pcb give it to repair service!
fullcontrol said:
Find in pcb testpoint or resistor cpu pin# SDC1_CLK first remove battery and usb cable too. short with ground. SDC1_CLK plugin usb cable and battery u will be see in Device Manager QHSUSB_DLOAD. 90008 com device. then leave to short with ground
Next step Folow this link
(if you have recognized QHSUSB_DLOAD. 90008 com device. You can fix boot with WPinternals try with old versions. 1.1 or 1.0 enginering sbl's unlock bootloader method...)
If not help, possible to failure any components in pcb give it to repair service!
Click to expand...
Click to collapse
Any other sollution???
Well, I managed to hard brick my Vibe P1.
The phone doesnt turn on, it doesnt charge, pretty much nothing is working.
I did manage to get into download mode once by holding volume up and inserting the USB into the PC, but I cant get into the download mode anymore.
NeptunePH said:
Well, I managed to hard brick my Vibe P1.
The phone doesnt turn on, it doesnt charge, pretty much nothing is working.
I did manage to get into download mode once by holding volume up and inserting the USB into the PC, but I cant get into the download mode anymore.
Click to expand...
Click to collapse
Update: I can now get into download mode but I still cant unbrick the device.
Any help is appreciated.
NeptunePH said:
Update: I can now get into download mode but I still cant unbrick the device.
Any help is appreciated.
Click to expand...
Click to collapse
Reflashed with qfil?
Starchm said:
Reflashed with qfil?
Click to expand...
Click to collapse
I tried QFIL yet no matter how many times I try, which USB cable I use, which PC Port I use, or no matter what ROM I try I always get the same error:
Download Fail:System.Exception: "Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail"
I found a "fix" which says to disable driver validation mode, but it doesnt work. Nothing I try works. Not even the Lenovo Moto Assistant flash thing.
NeptunePH said:
I tried QFIL yet no matter how many times I try, which USB cable I use, which PC Port I use, or no matter what ROM I try I always get the same error:
Download Fail:System.Exception: "Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail"
I found a "fix" which says to disable driver validation mode, but it doesnt work. Nothing I try works. Not even the Lenovo Moto Assistant flash thing.
Click to expand...
Click to collapse
Flash an really old lollipop rom with qfil, disable driver validation, use windows 7 32 bit official cable + usb2.0
Starchm said:
Flash an really old lollipop rom with qfil, disable driver validation, use windows 7 32 bit official cable + usb2.0
Click to expand...
Click to collapse
Could you please link me to a ROM to make sure im flashing the right one?
NeptunePH said:
Could you please link me to a ROM to make sure im flashing the right one?
Click to expand...
Click to collapse
https://forum.xda-developers.com/vibe-p1/development/lenovo-vibe-p1-stock-rom-custom-rom-t3306484 #4
Starchm said:
https://forum.xda-developers.com/vibe-p1/development/lenovo-vibe-p1-stock-rom-custom-rom-t3306484 #4
Click to expand...
Click to collapse
Nope, I still get the Sahara error thing.
NeptunePH said:
Nope, I still get the Sahara error thing.
Click to expand...
Click to collapse
disable driver validation, use windows 7 32 bit official cable + usb2.0
Starchm said:
disable driver validation, use windows 7 32 bit official cable + usb2.0
Click to expand...
Click to collapse
I did disable driver validation, I am using the usb2.0 cable+port, Im using win10 64 bit since I dont have a win7 32 bit key lying around.
Try to enter fastboot mode.Once you entered delete whole system partitions except efs1 and efs2 partitions.After this qfil will work just fine. I'm bricking my p1 everytime and fixing it like this.