Unofficial build of CyanogenMod 12.1 for chinese Lenovo Vibe Z2 Pro
DOWNLOAD
Google+ community
known bugs:
- HDR in Camera app not working
- flip cover not supported yet
- i had to "Format DATA" in recovery to be able to install this. it will delete everything from your phone so make a backup first if it's needed
kernel source: https://github.com/frantisheq/android_kernel_lenovo_msm8974
local_manifest.xml
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="frantisheq/android_device_lenovo_kingdomt" path="device/lenovo/kingdomt" remote="github" revision="cyanogenmod-cm-12.1" />
<project name="frantisheq/android_device_lenovo_common" path="device/lenovo/common" remote="github" revision="cyanogenmod-cm-12.1" />
<project name="frantisheq/android_kernel_lenovo_msm8974" path="kernel/lenovo/msm8974" remote="github" revision="cm-12.1" />
<project name="frantisheq/proprietary_vendor_lenovo" path="vendor/lenovo" remote="github" revision="cm-12.1" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" revision="cm-12.1" />
<project name="CyanogenMod/android_hardware_qcom_fm" path="hardware/qcom/fm" remote="github" revision="cm-12.1" />
</manifest>
Click to expand...
Click to collapse
first build up. it's the same as row version just correctly named as kingdomt
Too good
Thanks so much frantisheq. I think you made us China Mobile version users' lives a bit easier. Could someone just double check the procedure with me? Is it it necessary to first update to Lollipop before going to CM12, or is a unlocked bootloader with 4.42 good enough to update this?
Thank you in advance.
---------- Post added at 08:28 PM ---------- Previous post was at 07:35 PM ----------
Could I double check my procedure with a more advanced user here?
1) I unlocked the bootloader on my KitKat 4.42, Rooted using Kingroot
2) Find a way to install TWRP
3) Clear Dalvik, Wipe Data, Cache, Partition
4) Install CM 12.1 (for China Mobile)
Is this correct or do I need to update my firmware to Lollipop (China Mobile version) first?
---------- Post added at 09:11 PM ---------- Previous post was at 08:28 PM ----------
Tried to flash my firmware with this, but got the message that my firmware is kingdomrow, not kingdomt, even though im on firmware:
VIBEUI_V2.0_1430_ST_K920_CMCC (4.42)
Also the preloader didn't seem to be flashing either.. Did I do something wrong?
Install method or something similar?
Someone have to do something with this?
Currently I am using Z2 pro with the stock rom (K920_ROW_S126_140825) but changed modem file to make it available to use 4G.
Thanks
crixtm said:
Someone have to do something with this?
Currently I am using Z2 pro with the stock rom (K920_ROW_S126_140825) but changed modem file to make it available to use 4G.
Thanks
Click to expand...
Click to collapse
Are u using on chinese version and f yes can u point me as to where
Sent from my K920 using Tapatalk
Cancro
michael0617 said:
Are u using on chinese version and f yes can u point me as to where
Sent from my K920 using Tapatalk
Click to expand...
Click to collapse
Hi,
I am having trouble installing this on my device. Everytime I try to install this through twrp I get message:
"This package is for device: kingdom; this device is cancro. Updater Process Ended with Error: 7"
I have a china version of vibe z2 pro. Would you please advise what this is and how I can fix. My phone not working so trying to install os.
Apologies if noob question.
THanks.
@bdh123 you are using TWRP from bballzeroone, use this one http://forum.xda-developers.com/android/development/recovery-team-win-recovery-project-3-0-t3454739
bballzeroone's has build prop for xiaomi MI4 that's why it's not working for you
That worked
frantisheq said:
@bdh123 you are using TWRP from bballzeroone, use this one http://forum.xda-developers.com/android/development/recovery-team-win-recovery-project-3-0-t3454739
bballzeroone's has build prop for xiaomi MI4 that's why it's not working for you
Click to expand...
Click to collapse
That worked! Thank you so much, I have been searching the internet for hours today as I really needed my phone to work. It downloaded an update in Chinese and everything went crazy so started reading up on how to install a decent rom.
This works brilliantly so far. Will feedback how it goes with regard to functionality etc but so far so good.
Thank you once again for your kind help!
Haha been stuck in 5.0.2 for long..and finally found this thread to 5.1.1
anymore update since Jan 2016? will try to flash it this weekend.
Thank You.
http://forum.xda-developers.com/k920
Sent from my K920 using Tapatalk
Actually no update on this. If you want to 5.1.1 go to the ROW here: http://forum.xda-developers.com/k920/development/rom-cyanogenmod-lenovo-vibe-z2-pro-t3152804
Or move to 6.0.1: http://forum.xda-developers.com/k920/development/rom-cyanogenmod-13-0-lenovo-vibe-z2-pro-t3303637
crixtm said:
Actually no update on this. If you want to 5.1.1 go to the ROW here: http://forum.xda-developers.com/k920/development/rom-cyanogenmod-lenovo-vibe-z2-pro-t3152804
Or move to 6.0.1: http://forum.xda-developers.com/k920/development/rom-cyanogenmod-13-0-lenovo-vibe-z2-pro-t3303637
Click to expand...
Click to collapse
Was warned not to use ROW for CN edition, not sure if this still stands
bdh123 said:
That worked! Thank you so much, I have been searching the internet for hours today as I really needed my phone to work. It downloaded an update in Chinese and everything went crazy so started reading up on how to install a decent rom.
This works brilliantly so far. Will feedback how it goes with regard to functionality etc but so far so good.
Thank you once again for your kind help!
Click to expand...
Click to collapse
Hi, any update on your usage about the ROM?
leecs said:
Was warned not to use ROW for CN edition, not sure if this still stands
Click to expand...
Click to collapse
I am using this with an installed modem.zip
My process:
1. qfil (deBrick) to the base row
2. OTA update to latest via WIFI
3. Install twrp
4. Install modem.zip
5. Install ROW
6. Being happy
7. Later: being sad because CM13 still buggy
crixtm said:
I am using this with an installed modem.zip
My process:
1. qfil (deBrick) to the base row
[leecs] i do not understand about this step, will check later, any link?
2. OTA update to latest via WIFI
[leecs] may i know OTA for the existing ROM?
3. Install twrp
4. Install modem.zip
[leecs] able to share?
and i have not flash modem.zip before, any link for me?
5. Install ROW
6. Being happy
7. Later: being sad because CM13 still buggy
Click to expand...
Click to collapse
[leecs] the HDR? let'was for CM14
qfil-debrick - http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
OTA - connect to your wifi and check for updates - it'll work
install twrp: 1. root, 2. bootloader unlock, 3. install twrp (be careful with these stuff, you have to use lollipop becaue latest rom which came from OTA is lolli)
modem.zip: install with twrp
http://lenovo-forums.ru/topic/13404-lenovo-vibe-z2-pro-k920-патчи-модемов-под-twrp/#ipboard_body
crixtm said:
qfil-debrick - http://www.androidbrick.com/ultimat...agons-are-unbrickable-qhsusb_dload_qpst_qfil/
OTA - connect to your wifi and check for updates - it'll work
install twrp: 1. root, 2. bootloader unlock, 3. install twrp (be careful with these stuff, you have to use lollipop becaue latest rom which came from OTA is lolli)
modem.zip: install with twrp
http://lenovo-forums.ru/topic/13404-lenovo-vibe-z2-pro-k920-патчи-модемов-под-twrp/#ipboard_body
Click to expand...
Click to collapse
Modem CN 1-6, may i know which one to install?
Related
Hi All,
I repacked the latest ColorOS 2.0.4i Beta.
Features:
1. Pure stock ColorOS 2.0.4i Beta (unmodified)
2. Integrated kernel patch from Entropy.
3. Automatic lvm setup during install (credit to Entropy).
4. Will not flash oppo stock recovery.
Requirements:
1. Lvm aware - Official TWRP recovery 2.8.0.1 and newer.
How to install:
1. Backup
2. Copy in external sdcard
3. Boot to recovery.
4. Factory reset
5. Install zip file
Credits:
- OPPO
- Google
- Entropy512
*WARNING : lvm setup requires wiping internal storage.
Want to revert to stock. non-lvm partition?
- Boot in recovery, format the "raw_sd" and "raw_data" partitions. Again this will wipe your internal storage.
Enjoy!
XDA:DevDB Information
ColorOS 2.0.4i Beta Repack, ROM for the Oppo Find 7a
Contributors
tantrums
ROM OS Version: 4.4.x KitKat
Based On: ColorOS
Version Information
Status: Stable
Created 2015-01-15
Last Updated 2015-01-15
Took me a while to realize I'm not stupid and there are just no download links yet. I want to ask about the kernel patch, does it include the touchscreen drivers fix in Omni and Nameless 5.x builds? The official 2.0.4 had broken touchscreen for me while all the previous betas and stables have been fine since 1.2.5ish. Thanks.
Does this have Full Root?
---------- Post added at 05:00 PM ---------- Previous post was at 04:59 PM ----------
lifeflayer said:
Took me a while to realize I'm not stupid and there are just no download links yet. I want to ask about the kernel patch, does it include the touchscreen drivers fix in Omni and Nameless 5.x builds? The official 2.0.4 had broken touchscreen for me while all the previous betas and stables have been fine since 1.2.5ish. Thanks.
Click to expand...
Click to collapse
Yes it does have download links. Click the download tab.
Thx a lot Tantrum
So will this wipe internal sd on my non unified x9076?
Ups, it's lvm edition, sorry!
(You should read before posting, spoony
sniper-joe said:
Does this have Full Root?
---------- Post added at 05:00 PM ---------- Previous post was at 04:59 PM ----------
Yes it does have download links. Click the download tab.
Click to expand...
Click to collapse
This version is not rooted.
I will have a full Makulay version in progress. And will include all the usual mods and features including root, etc.
Can not install on OPPO Find 7a.
This rom for OPPO Find 7.
askii said:
Can not install on OPPO Find 7a.
This rom for OPPO Find 7.
Click to expand...
Click to collapse
Nope, don't known , it fails on my x9076 to! ?
Working fine on my x9076. Was running Makulay previously, switch back to non-unified and flash this ROM. It will auto format into lvm. Just install n enjoy this ROM.
Sent from my X9076 using xda premium
Rooted version now up.
tantrums said:
Rooted version now up.
Click to expand...
Click to collapse
Unable to flash, getting a unable to make lvm partitions! !?
On x9076 non unified
Sorry...I have been away for a long time and just started reading the Forums again:
So working with Lvm support is better than working with the unified tool?
Thanks
tantrums said:
Rooted version now up.
Click to expand...
Click to collapse
I am getting old,,,,can't find the download link for this beta repack ......
EDIT - JUst found the download tab ...downloading now
Cannot flash it from recovery ....get only errors...
My device is on my sign
Edit: I didn't apply a factory reset ,,,, I must say, I'm a sucker for dirty installs....maybe I will try a clean install tomorrow ....
.
betoNL said:
Cannot flash it from recovery ....get only errors...
My device is on my sign
Edit: I didn't apply a factory reset ,,,, I must say, I'm a sucker for dirty installs....maybe I will try a clean install tomorrow ....
.
Click to expand...
Click to collapse
Dont bother, wont flash!!
ColorOS v2.0.5i beta is out!
spoonymoon said:
Dont bother, wont flash!!
Click to expand...
Click to collapse
Nobody can flash it?
What's the point then ?
I'm using this ROM now, not the rooted version but earlier version n root it with root_find7_2.0.0i_supersu_2.14_rdis.zip
Very solid ROM I'd say. No big issue so far for my daily usage.
Sent from my X9076 using xda premium
kongming said:
I'm using this ROM now, not the rooted version but earlier version n root it with root_find7_2.0.0i_supersu_2.14_rdis.zip
Very solid ROM I'd say. No big issue so far for my daily usage.
Sent from my X9076 using xda premium
Click to expand...
Click to collapse
So the unrooted version is flashable and the rooted isn't?
.
betoNL said:
So the unrooted version is flashable and the rooted isn't?
.
Click to expand...
Click to collapse
Yes, I'm using this ROM. Apps that required root I install are working fine too, like titanium backup, device control, root explorer, lmt. But dunno why the lmt won't auto run on each reboot the phone. Have to manual enable it.
Sent from my X9076 using xda premium
kongming said:
Yes, I'm using this ROM. Apps that required root I install are working fine too, like titanium backup, device control, root explorer, lmt. But dunno why the lmt won't auto run on each reboot the phone. Have to manual enable it.
Click to expand...
Click to collapse
I can't flash both versions.
Which recovery and version are you using?
Anyway, I will wait a little longer for a stable repack 2.0.5 based....
.
Hi @Yash98 ,
Any plans of getting H2 OS for this device. I was using it in OP2 and totally in love with it.
Thanks,
premjeeth said:
Hi Yash,
Any plans of getting H2 OS for this device. I was using it in OP2 and totally in love with it.
Thanks,
Click to expand...
Click to collapse
yes there are a stock Hydrogen os rom avaible
mauronofrio said:
yes there are a stock Hydrogen os rom avaible
Click to expand...
Click to collapse
Can we use the debloater of OP2 for this device as well?
premjeeth said:
Can we use the debloater of OP2 for this device as well?
Click to expand...
Click to collapse
i think yes
Have any of you found a rom/stock image of H2os for oneplus 3?
It's in oneplusbbs website. But the download speed is pathetically slow. I tried downloading twice, but it was reset halfway in between.
premjeeth said:
It's in oneplusbbs website. But the download speed is pathetically slow. I tried downloading twice, but it was reset halfway in between.
Click to expand...
Click to collapse
I wish I could understand anything on their website lol.
cesar.mk4 said:
I wish I could understand anything on their website lol.
Click to expand...
Click to collapse
I have already downloaded the same. But little apprehensive before flashing it. I can share the link with you.
But before flashing, i just wanted to make sure,
1. dash charging works
2. Can use the @Grarak TWRP to flash
3. Can use the @Yash98 debloater which he created for OP2.
Still looking for these answers.
It's this version..
OnePlus3Hydrogen 16 OTA 005 all 1606081524 a0822b4f73da4596
premjeeth said:
It's this version..
OnePlus3Hydrogen 16 OTA 005 all 1606081524 a0822b4f73da4596
Click to expand...
Click to collapse
Let me know what you find out, bud. I'm interested in this.
Post the link... U also need modded twrp to flash it
I would also want to try Hydrogen OS on OP3, hope it totally supports English. Anybody with the download link and procedure on how to install it.
I just tried installing it. I couldn't boot it though. The error I was getting, "Need to add google account" which I had already added.
The setup language is English, however the help text which appears are in Chinese. It still has quite a lot of Chinese characters on the keyboard as well.
Phate00 said:
Post the link... U also need modded twrp to flash it
Click to expand...
Click to collapse
Can I upload the ROM in Mega.nz and share the link here?
Here it is....
https://mega.nz/#!j4t3UBbC!9Gcq2VYTTMsQEWqn5n3Cr3lubh8xpwoRA9c1nHI3A1w
premjeeth said:
Here it is....
https://mega.nz/#!j4t3UBbC!9Gcq2VYTTMsQEWqn5n3Cr3lubh8xpwoRA9c1nHI3A1w
Click to expand...
Click to collapse
Thanks but I have to wait for proper twrp to flash
premjeeth said:
I have already downloaded the same. But little apprehensive before flashing it. I can share the link with you.
But before flashing, i just wanted to make sure,
1. dash charging works
2. Can use the @Grarak TWRP to flash
3. Can use the @Yash98 debloater which he created for OP2.
Still looking for these answers.
Click to expand...
Click to collapse
1,3 true. (and most probably 2 as well true)
I have heard that h2os has fix for fingerprint causing problem in pockets. Just one question though. Which one is better oos or h2os. I just can't seems to find the difference between the two
Sent from my ONEPLUS A3003 using Tapatalk
Finally flashed H2 OS successfully on my OnePlus 3.
Thanks to @Yash98 for the debloater and @Grarak for the TWRP.
The steps I followed:
Boot into TWRP (Grarak) and go to Wipe then Swipe to factory reset
Flash in this sequence:
1. ROM (OnePlus3Hydrogen 16 OTA 005 all 1606081524 a0822b4f73da4596): Link in the above post
2. Debloater+SuperSU (H2OS_MM_DBLOATR+SuperSU.zip) - Thanks to @Yash98. (Please look in Official Hydrogen OS post in OnePlus 2 forums)
3. Open G-Apps (I've used Nano)
Enjoy.
premjeeth said:
I have already downloaded the same. But little apprehensive before flashing it. I can share the link with you.
But before flashing, i just wanted to make sure,
1. dash charging works
2. Can use the @Grarak TWRP to flash
3. Can use the @Yash98 debloater which he created for OP2.
Still looking for these answers.
Click to expand...
Click to collapse
Dash charging did work
I used Graraks twrp to flash it
Debloater did not try.
It has permission issues, permissions apps should have are not present in the system (onedrive does not have the media permission available, play services did not have a few as well after flashing google services in twrp)
standby battery life was freaking amazing. If permissions get sorted, I will DD it in a heartbeat
---------- Post added at 05:36 AM ---------- Previous post was at 05:34 AM ----------
premjeeth said:
Finally flashed H2 OS successfully on my OnePlus 3.
Thanks to @Yash98 for the debloater and @Grarak for the TWRP.
The steps I followed:
Boot into TWRP (Grarak) and go to Wipe then Swipe to factory reset
Flash in this sequence:
1. ROM (OnePlus3Hydrogen 16 OTA 005 all 1606081524 a0822b4f73da4596): Link in the above post
2. Debloater+SuperSU (H2OS_MM_DBLOATR+SuperSU.zip) - Thanks to @Yash98. (Please look in Official Hydrogen OS post in OnePlus 2 forums)
3. Open G-Apps (I've used Nano)
Enjoy.
Click to expand...
Click to collapse
Can you install onedrive and see if photos backup for you? That is the most important item for me at the moment and when I flashed it it did not work correctly
Updated to "Version S232_161227" for LENOVO K4 NOTE VIBE!!!
#Disclaimer!
Your warranty is now void.
I am not responsible for bricked devices!!!
1. This is Marshmallow Stock Rom A7010a48_S230_161129_ROW- No more Available Deleted
2. This is Marshmallow Stock Rom A7010a48_S232_161227_ROW
Version - 1
# Fully Deodexed, Zipaligned
# Rooted with Super Su
# Added Busybox, int.d and build.prob Tweeked
# Removed All Bloatware, all google gapps available in playstore!!!
# Added HTC SenseHome8, Xperia Keyboard and Music
# Very Fast and Stable, Improved Battery and Ram Memory, No Lags!!!
# All settings and apps working
No Bugs!!!!
Version - 2
# Same as above
# Fully removed Lenovo Theme Center (But Theme apk is there due to FC! but nothing you found
# Now you can change Lock Screen Wallpaper too, just download >file>download folder>select>edit>and apply!!!
# Very stable for daily driver and super fast without any lag!!!!
# wipe all including data and factory reset, flash with TWRP and reboot system
Download Version - S-232
https://drive.google.com/file/d/0Bx6v8ZVBCfnEbGw5WDdtdGdFUms/view?usp=sharing
ROM Previewhttps://drive.google.com/drive/folders/0Bx6v8ZVBCfnEWE5PZXV6c1AzRjQ?usp=sharing
Thanks to ALL XDA-DEVELOPERS, where I learn everything regarding ANDROID!!!!
tested and so far no bugs founded
great work
keep it up
Is there any way u try to explain how to use it. bcz recovery mode say no and there is no flash txt file inside to flash the rom. my phone current android version rom A7010a48_S230_161129_ROW
bhagmal said:
Is there any way u try to explain how to use it. bcz recovery mode say no and there is no flash txt file inside to flash the rom. my phone current android version rom A7010a48_S230_161129_ROW
Click to expand...
Click to collapse
You need TWRP recovery!
Volte or not...?
Raj bava said:
Volte or not...?
Click to expand...
Click to collapse
YES!!!
Volte not working for me.... Flashed twice ... ROM is good fast .. loved HTC Sense Home..
Hi can i use this method to flash it?: youtube.com/watch?v=xcxOu2BZefI
ArunHellA said:
Hi can i use this method to flash it?: youtube.com/watch?v=xcxOu2BZefI
Click to expand...
Click to collapse
No, That is for stock rom flashing You need custom TWRP recovery and wipe everything... flash and reboot...
Google is your god search for How to fastboot, reboot, oem unlock flash Twrp and alll.....
The best ROM I've tested so far. ?
Help
Sir plz port nougat based roms for k4 note. Plz
hirencj said:
Volte not working for me.... Flashed twice ... ROM is good fast .. loved HTC Sense Home..
Click to expand...
Click to collapse
Also flashed this ROM (from s152 and direct TWRP to S230) but could not find "ENHANCED 4G LTE MODE" switch in mobile network settings. Could you confirm if this ROM is with VOLTE patch?
jhonkenyir said:
Sir plz port nougat based roms for k4 note. Plz
Click to expand...
Click to collapse
Mr @mohancm working for it, he will do it very soon!!!
chuckoy said:
Also flashed this ROM (from s152 and direct TWRP to S230) but could not find "ENHANCED 4G LTE MODE" switch in mobile network settings. Could you confirm if this ROM is with VOLTE patch?
Click to expand...
Click to collapse
My friend VOLTE is working (I am posting this with Jio Network ), Your problem is straight from ROW-S152 to S230 to S232, first you have to flash Official firmware of ROW-S230 with SPflash tool and you know the procedures...
This ROMS are tweaked and removed all the bloatware for speed, speed, speed :laugh:
If I'm on v1, do I need to wipe data and factory reset to go to v2?
You can do that but when you flash a new version it is right procedure to wipe everything
Perfect ROM...
---------- Post added at 06:41 PM ---------- Previous post was at 06:38 PM ----------
marcoshcf said:
If I'm on v1, do I need to wipe data and factory reset to go to v2?
Click to expand...
Click to collapse
I flashed the ROM just wiped system nothing else working perfectly no issues...
hirencj said:
Perfect ROM...
---------- Post added at 06:41 PM ---------- Previous post was at 06:38 PM ----------
I flashed the ROM just wiped system nothing else working perfectly no issues...
Click to expand...
Click to collapse
Good :good::good::good:
It seems like there is a problem in turning off the key vibrations.
Ringtones and Volumes > Other Sounds, isn't available to trigger।.
Please have a look.
DMJoh said:
It seems like there is a problem in turning off the key vibrations.
Ringtones and Volumes > Other Sounds, isn't available to trigger।.
Please have a look.
Click to expand...
Click to collapse
Checked, Dial Pad Tones, Screen Locking Sounds, Touch Sounds, Vibrate on Touch. all are working (on or off) without any issues :good:
Hi everyone, in this thread I'll provide MIUI9 official roms from alpha tester. At the moment stability seems good but I always recommend to have a backup.
ATTENTION!!!
To install the recovery rom is required to have ZCX installed, if you try with TWRP the phone won't boot. Here's the .img file:
https://mega.nz/#!YqgCXSbC!_jeM0cs0-PnLsaTjy3quST52EZnkdzBSE4xZm9fF_3k
*****************************************************
Downloads:
Fastboot rom 7.8.14:
http://bigota.d.miui.com/7.8.14/gemini_images_7.8.14_20170814.0000.00_7.0_cn_2714479b5b.tgz
Recovery rom 7.8.16 alpha:
http://bigota.d.miui.com/7.8.16/miui_MI5Alpha_7.8.16_318aa8be7a_7.0.zip
Recovery rom 7.8.17 beta:
http://bigota.d.miui.com/7.8.17/miui_MI5_7.8.17_1e9618b1ce_7.0.zip
Recovery rom 7.8.18 alpha:
http://bigota.d.miui.com/7.8.18/miui_MI5Alpha_7.8.18_0dd6969ca3_7.0.zip
Recovery rom 7.8.22 alpha:
http://bigota.d.miui.com/7.8.22/miui_MI5Alpha_7.8.22_2ace8cf395_7.0.zip
Recovery rom 7.8.23 alpha:
http://bigota.d.miui.com/7.8.23/miui_MI5Alpha_7.8.23_b89dec0dd3_7.0.zip -->Introduced new volume panel
Recovery rom 7.8.24 alpha:
http://bigota.d.miui.com/7.8.24/miui_MI5Alpha_7.8.24_5ae289d45c_7.0.zip
BIG SURPRISE!!!
Recovery rom global beta 7.8.22 :
http://bigota.d.miui.com/7.8.22/miui_MI5Global_7.8.22_bb8f83ed80_7.0.zip
*****************************************************
IMPORTANT!!! READ HERE!!!
-On the official miui forum there have been released officially the fastboot roms for all the second batch of devices and according on what is written on they're forum also xiaomi.eu will upload their translated version for every devices included our Mi5.
*****************************************************
Seems that on closed beta somebody is able to do ota update even without a beta tester account so before flashing this try if it works and tell me thanks.
Wipe cache, dalvik, data is necessary for the first flash if you come from miui 8.
After that only cache and dalvik recommended.
I don't own this rom, this is original Miui 9 taken from xiaomi alpha tester account. Language are only chinese/english .
I'll update the post daily as I get the new version.
Thank you, enjoy MIUI9!
Thanks, do you have a list of corrected changes or bugs?
allamasi said:
Thanks, do you have a list of corrected changes or bugs?
Click to expand...
Click to collapse
Nope, but I'm using it without problem since 2 days now. If I'll discover any bugs I'll update the thread.
sacca25 said:
Nope, but I'm using it without problem since 2 days now. If I'll discover any bugs I'll update the thread.
Click to expand...
Click to collapse
Italian language will be disponible in next updates ??
Can I update to 7.8.9 from 7.8.7 with updater app.
Zxc revovery zip for recovery flashing , anyone ?
have google services suport?
tshohel7 said:
Can I update to 7.8.9 from 7.8.7 with updater app.
Click to expand...
Click to collapse
Nope, u have to dirty flash from recovery every update.
ste13gr said:
Zxc revovery zip for recovery flashing , anyone ?
Click to expand...
Click to collapse
Here's the .img file for Zxc: https://mega.nz/#!YqgCXSbC!_jeM0cs0-PnLsaTjy3quST52EZnkdzBSE4xZm9fF_3k
feplau said:
have google services suport?
Click to expand...
Click to collapse
U have to install using the google installer v2, easy google it.
Rondix91 said:
Italian language will be disponible in next updates ??
Click to expand...
Click to collapse
Nope. Italian will come with the public global dev or xiaomi.eu at the end of august
sacca25 said:
Nope, u have to dirty flash from recovery every update.
Here's the .img file for Zxc: https://mega.nz/#!YqgCXSbC!_jeM0cs0-PnLsaTjy3quST52EZnkdzBSE4xZm9fF_3k
U have to install using the google installer v2, easy google it.
Click to expand...
Click to collapse
Is there a flashable zip for this ?
I dont have a pc available now.
Ty anyways.
ste13gr said:
Is there a flashable zip for this ?
I dont have a pc available now.
Ty anyways.
Click to expand...
Click to collapse
U can flash the image with twrp if u have already it in the phone. Just select install and then install image...
Kk I am in , so far so good .
Wow finally its coming...
Many thanks...
I do clean install on 7.8.7
So i will try to update just via updater...
Got it. It's fast!! So far so good
UCHIHA said:
Wow finally its coming...
Many thanks...
I do clean install on 7.8.7
So i will try to update just via updater...
Click to expand...
Click to collapse
Sadly, choose update package via updater still detect alpha tester account.
Dirty flash via zcx twrp is the way to update.
MIUI9... Its cool n smooth...
Already a thread Here with links.
Why do you need one?
Does anyone know if the beta links for the Mi5s and Mi5s+ are available? Or is it only the Mi6, RN4 and Mi5 so far?
ste13gr said:
Zxc revovery zip for recovery flashing , anyone ?
Click to expand...
Click to collapse
Yes. Can. I updated from 7.8.7 to 7.8.9 using zcx twrp
---------- Post added at 10:25 AM ---------- Previous post was at 10:21 AM ----------
eternitys said:
Already a thread Here with links.
Why do you need one?
Click to expand...
Click to collapse
These roms r more stable. That thread mainly provides customized miui 9 which hangs a lot.
UCHIHA said:
Wow finally its coming...
Many thanks...
I do clean install on 7.8.7
So i will try to update just via updater...
Click to expand...
Click to collapse
Unfortunately the updater works only of u have an alpha tester account mate
seems exactly the same as miui8...
hey guys! I just Uploaded this stock rom.
I already edited this one, so the others that unable to edit the firmware package from asus can simply download this and flash via recovery (e.g TWRP)
hope it helps!
Build .094
LINK: https://www.mediafire.com/file/eorjham5jj4wns5/stock_094.zip/file
Build .097
LINK: https://www.mediafire.com/file/hbaps1nm8hfwn5e/stock_097.zip/file
kayamokid said:
hey guys! I just Uploaded this stock rom.
I already edited this one, so the others that unable to edit the firmware package from asus can simply download this and flash via recovery (e.g TWRP)
hope it helps!
LINK: https://drive.google.com/open?id=19Y3Sk5wGs4EsMpQCWrULawo8OJvqiDKY
Click to expand...
Click to collapse
What SKU version is this?
Has anyone tried this. Please review and post here. I m on latest havoc OS, can I install it ? Last time I tried official pie,it messed a lot of things. Also please tell what sort of bugs were resolved after the latest 064 update.?
X10MINISTER said:
What SKU version is this?
Click to expand...
Click to collapse
its IN /RU. I'm from philippines and thats whats I get from asus PH.
anilyarki said:
Has anyone tried this. Please review and post here. I m on latest havoc OS, can I install it ? Last time I tried official pie,it messed a lot of things. Also please tell what sort of bugs were resolved after the latest 064 update.?
Click to expand...
Click to collapse
I tried this. I just use twrp and:
- wipe system data cache internal (for clean internal storage )
- flash this firmware. (just like typhical custom roms)
- reboot to recovery ( to check if its reverted to stock recovery)
- reboot.
Will it lock the bootloader and unroot the phone??
Will the official ota work??
koppisetty shravan said:
Will it lock the bootloader and unroot the phone??
Will the official ota work??
Click to expand...
Click to collapse
no, you must relock it.
kayamokid said:
its IN /RU. I'm from philippines and thats whats I get from asus PH.
Click to expand...
Click to collapse
How abt the VoLTE function? Is it enabled by default?
is this debloated rom or you just removed the assert line??
Zach Seretika said:
How abt the VoLTE function? Is it enabled by default?
Click to expand...
Click to collapse
I dunno sir. this is just a typhical firmware from asus. I just edited the updater to be able to flash this via TWRP.
Karvrock said:
is this debloated rom or you just removed the assert line??
Click to expand...
Click to collapse
I just removed the assert line sir.
Glad that I flashed this one . Here is a quick review for all those who have questions about this.
1. Stable rom. Can easily be used as a daily driver.
2. Gcam 6.024 fully supported. Even the front cam works. Night mode works l, no lags what so ever.
3. Volte function is supported . Dual volte supported.
4. Flashing this rom will not lock your bootloader or remove custom recovery. So have fun.
5. Battery back up is amazing. Can last up to 6hrs of pubg play with frame rates set to high.
6. All banking apps working for me.
7. Rooted with latest magisk 19.1
8. Audio output is decent.
Things that didn't work
1. WhatsApp video calling lag. This stupid bug has made its way in official firmware as well. Not sure how to resolve it. Rest all gr8
Will you provide support for all the ota and make it twrp flashable ???
Sent from my OnePlus5T using XDA Labs
Amanpreetsingh said:
Will you provide support for all the ota and make it twrp flashable ???
Sent from my OnePlus5T using XDA Labs
Click to expand...
Click to collapse
i'll try my very best in the future.
thank you! I really wanted to use the stable pie but before I always failed flashing through TWRP even though I edited the script.
if it doesn't support OTA and the latest version has been updated, are you going to make this flashable script again?
Deadley said:
thank you! I really wanted to use the stable pie but before I always failed flashing through TWRP even though I edited the script.
if it doesn't support OTA and the latest version has been updated, are you going to make this flashable script again?
Click to expand...
Click to collapse
Yes.
Quick question, do you have to flash decrypt zip again before/after flashing stock? I already did use decrypt once before. Now I'm currently on Havoc. Thanks!
bratboo said:
Quick question, do you have to flash decrypt zip again before/after flashing stock? I already did use decrypt once before. Now I'm currently on Havoc. Thanks!
Click to expand...
Click to collapse
NOT required if you are using pbrp. Flash it if using twrp.
anilyarki said:
NOT required if you are using pbrp. Flash it if using twrp.
Click to expand...
Click to collapse
How about whatsapp video call issue
---------- Post added at 11:07 AM ---------- Previous post was at 11:01 AM ----------
kayamokid said:
Yes.
Click to expand...
Click to collapse
Whatsapp videocall still lag?
WhatsApp video call lag is there. I have found a solution now but I have already changed to arrow OS. Can you try this a let us know if it works.
Edit build.prop inside vendor folder
Than add com.whatsapp or package name of any whatsapp mod to line camera.hal1.packagelist
Reboot, if still lagging, edit the name of camera.hal1.packagelist to vendor.camera.hal1.packagelist
It will help others of someone could try this.