Develop Bugs

[KERNEL] [5.0.1/5.0.2] [TW/CM] CyanKernel v1.0.5 - Galaxy S 4 i9500 Android Development

*Your warranty is now void
CyanKernel, Kernel for the Samsung Galaxy S 4
CM USERS DOWNLOAD (IT IS EXPERIMENTAL !!!!)
- Built from Samsung's latest I9500XXUHOL1 Lollipop Kernel Sources
- Linux kernel version update to 3.4.5
- Built with Uber 4.9
- 20 CPU Governors
- ExFAT, NTFS, NFS, CIF Support
- Gpu Overclock
- Gpu min/max Value Control
- Wolfson Sound Control
- Battery Charge Control
- Screen Control
- Led Control
- Disabled android logger as a default setting
- Cpu Voltaqe Control
- SELinux disabled. (Permissive)
- Cpu Underclock
- Cpu Core Number Control
- Gpu Voltaqe Control
- Touchscreen Control
- Touchkey Control
- Memory Interface Voltaqe Control
- PowerSuspend Driver Control
- Battery Scaling Calibration Option
- Synapse Support
I AM DEVELOPING THIS KERNEL FOR BETTER GAMING PERFORMANCE OR OTHER HEAVY PROCCESSES
DOWNLOAD
Instructions:
1- Install kernel toolkit app from store
2 - Place kernel zip to externalsd
3 - Reboot into recovery and flash the zip
4 - Wipe Dalvik, Cache, Preload before boot system
5 - Reboot and give 1 minute after rebooting phone for applying the new version's settings
6 - Open kernel toolkit and enjoy.
7- Done. Now you dont face any problem about it. You can tweak for your desire and usage.
If you dont do this steps correctly, you will face problem about your system and if dont follow this rules, your problems will be ignore.
If anything going wrong download (look at the attachment) and flash it. (2nd post)
XDA:DevDB Information
Project CyanKernel, Kernel for the Samsung Galaxy S 4
Contributors
emre3461
Kernel Special Features: -Custom governors. -Overclocked. -Built from Uber 4.9 -Stock Kernel Based
Version Information
Status: Stable
Current Stable Version: http://voltaqe.com/I
Created 2016-01-18
Last Updated 2016-01-27

thank for new kernel what is different with voltaqe kernel?

New Kernel. Good Lucky Bro!

For bootloop or errors flash this.

henry1550 said:
thank for new kernel what is different with voltaqe kernel?
Click to expand...
Click to collapse
for now no difference but i am working on it

Next Version Changelog v1.0.1
-Some governors will be added.
-Some bugfixes.

NOTE: v1.0 may cause soft brick on some devices don' use if you using another rom. If your device bricked or bootloop try flash stock kernel.
Edit: v1.0.1 is very stable no bootloops or softbricks.

I need testers. you can send pm for being testers.

Next Version will be based from Samsung Stock Kernel Source (XXUHOH7) (VoLTaqe source incompatible for me)

Updated
Changelog v1.0.1
-Compiled from Stock Kernel source.
-Fixed booting problem (ramdisk fixed).
Next Version some governors will be added.
DOWNLOAD:
https://drive.google.com/file/d/0B12z_fx7oOcOb215VjZadENTb2c/view?usp=docslist_api

UPDATED v1.0.2
Changelog:
-SELinux disabled. (permissive)
-intelliactive governor added. (default governor but you can change)
-some technical changes.
-AndroBooster governor compatibility. (booster app on google play https://play.google.com/store/apps/details?id=com.emre.androbooster )
DOWNLOAD
Next version:
-Some governors will be added.
-Performanca improvements. (GPU overlocking etc.)

emre3461 said:
Changelog:
-SELinux disabled. (permissive)
-intelliactive governor added. (default governor but you can change)
-some technical changes.
-AndroBooster governor compatibility. (booster app on google play https://play.google.com/store/apps/details?id=com.emre.androbooster )
DOWNLOAD
Next version:
-Some governors will be added.
-Performanca improvements. (GPU overlocking etc.)
Click to expand...
Click to collapse
great works bro one more option for our device, just a suggestion that you make a change log update right on the first post then update it there so it will be more convenient for people to see them later on

@emre3461 how would you compile a version for aosp?
My tips (optional):
Best source: https://github.com/GearCM/android_kernel_samsung_exynos5410
Best toolchain: http://sabermod.com/Toolchains (DEV ONLY)/arm/arm-linux-androideabi/
Best governor: https://github.com/zanezam/cpufreq-governor-zzmoove

treborbr said:
@emre3461 how would you compile a version for aosp?
My tips (optional):
Best source: https://github.com/GearCM/android_kernel_samsung_exynos5410
Best toolchain: http://sabermod.com/Toolchains (DEV ONLY)/arm/arm-linux-androideabi/
Best governor: https://github.com/zanezam/cpufreq-governor-zzmoove
Click to expand...
Click to collapse
May be i will compile for AOSP later because my s4 has IMEI problem and i can't use AOSP . i need service mode for connect network.

OTA Updates
I will write an OTA service for kernel soon. Updates will be checkabled from app. This will be a first for a kernel.

Warning
NOTE: if you are using stock based custom rom You HAVE TO DELETE from build.prop which have any DHA word.

emre3461 said:
Changelog:
-SELinux disabled. (permissive)
-intelliactive governor added. (default governor but you can change)
-some technical changes.
-AndroBooster governor compatibility. (booster app on google play https://play.google.com/store/apps/details?id=com.emre.androbooster )
DOWNLOAD
Next version:
-Some governors will be added.
-Performanca improvements. (GPU overlocking etc.)
Click to expand...
Click to collapse
Good work. Keep it up [emoji106]

UPDATED v1.0.3
Changelog
-18 New governor added.
-GPU Overclocked. (for better benchmark results and heavy gaming, don't afraid no overheating or no battery drain)
-Some fixes.
-Battery improvements. (use AndroEnergy on google play for better battery or powersave governor)
-CPU Overclocked. (Max frequence is 2GHz but it is dangerous don't use for now.)
-Kernel version in settings fixed.
I will release OTA Updater soon, i am preparing server for it. Stay tuned
Enjoy !

emre3461 said:
Changelog
-18 New governor added.
-GPU Overclocked. (for better benchmark results and heavy gaming, don't afraid no overheating or no battery drain)
-Some fixes.
-Battery improvements. (use AndroEnergy on google play for better battery or powersave governor)
-CPU Overclocked. (Max frequence is 2GHz but it is dangerous don't use for now.)
-Kernel version in settings fixed.
I will release OTA Updater soon, i am preparing server for it. Stay tuned
Enjoy !
Click to expand...
Click to collapse
Installed v2 and v3 now. v2 was pretty cool as simple as stock. v3 oc to 1700 and 100 lets monitor and will update you i am on ale95 v2, I am feeling better than voltage as thre is lot of hang and reboots, so pls make a clean one. dont just keep continously update. keep it tight with good few governers and battery life and ram managment nothing more or much.

itsme12345 said:
Installed v2 and v3 now. v2 was pretty cool as simple as stock. v3 oc to 1700 and 100 lets monitor and will update you i am on ale95 v2, I am feeling better than voltage as thre is lot of hang and reboots, so pls make a clean one. dont just keep continously update. keep it tight with good few governers and battery life and ram managment nothing more or much.
Click to expand...
Click to collapse
Okay, i will make clean kernel. I am using ale95 v2 with CyanKernel v1.0.3 . I didn't face any random reboot or hang. I am working for clean, powerfull kernel. I don't recommend use 2 GHz for now. Use powersave governor or reduce max freq. Can you suggest some useful governer for our device ?

Related

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alucard SGSIV Kernel's for GT-I9505
...works with TW KK, Google Edition KK and AOSP ROM's...​
[Introduction]:
These kernel's are built from CyanogenMod KK branch and Samsung KK sourcecode!
CPU UV is supported by STweaks integrated app. CPU OC is not supported.
The kernel can be used with the old and new bootloader and should fix random reboots on Google Edition ROM.
>>>>>>>>>> CM12.1 <<<<<<<<<<
Kernel-Alucard-V1.3ba For 5.1/5.1.1 NEW-CM12.1 version (CM12.1 2015/05/13 AND LATER ONLY)
Kernel-Alucard-V1.X (AFH Mirror)
Kernel-Alucard-V1.3b For 5.1/5.1.1 AOSP version (CM12.1 before 2015/05/13 or OPTIMIZED CM12.1)
Kernel-Alucard-V1.X (AFH Mirror)
Kernel-Alucard-V1.3a For 5.1/5.1.1 AOSP version
Kernel-Alucard-V1.X (AFH Mirror)
>>>>>>>>>> CM12.0 <<<<<<<<<<
Kernel-Alucard-V1.1a For 5.0 AOSP version
Kernel-Alucard-V1.X (AFH Mirror)
Kernel-Alucard-V1.0e For 5.0 AOSP version
Kernel-Alucard-V1.0e-[16-47]-[06-12]-AOSPV2-EUR-LP5.0-SGIV-PWR-CORE.zip (MEGA Mirror)
>>>>>>>>>> AOSP V2 (for AOSP ROMs after 06 August 2014, included CM11 M10) <<<<<<<<<<
Kernel-Alucard-V1.4r For 4.4 AOSP V2 version
Kernel-Alucard-V1.X (AFH Mirror)
Kernel-Alucard-V1.4qs For 4.4 AOSP V2 version
Kernel-Alucard-V1.4qs-[23-08]-[01-12]-AOSPV2-EUR-KK4.4-SGIV-PWR-CORE.zip (MEGA Mirror)
Kernel-Alucard-V1.4q For 4.4 AOSP V2 version
Kernel-Alucard-V1.4q-[20-56]-[19-11]-AOSPV2-EUR-KK4.4-SGIV-PWR-CORE.zip (MEGA Mirror)
Kernel-Alucard-V1.4pb For 4.4 AOSP V2 version
Kernel-Alucard-V1.4pb-[20-18]-[11-11]-AOSPV2-EUR-KK4.4-SGIV-PWR-CORE.zip (Dev-Host Mirror)
Kernel-Alucard-V1.4pb-[20-18]-[11-11]-AOSPV2-EUR-KK4.4-SGIV-PWR-CORE.zip (MEGA Mirror)
MD5 Sum: 403d0069fc2041605cedad0422b29cb0
Kernel-Alucard-V1.4ocm For 4.4 AOSP V2 version
Kernel-Alucard-V1.4ocm-[00-22]-[09-11]-AOSPV2-EUR-KK4.4-SGIV-PWR-CORE.zip (Dev-Host Mirror)
Kernel-Alucard-V1.4ocm-[00-22]-[09-11]-AOSPV2-EUR-KK4.4-SGIV-PWR-CORE.zip (MEGA Mirror)
MD5 Sum: 95bbb95dfc6b07b24dece5183c1c483f
>>>>>>>>>> GE <<<<<<<<<<
Kernel-Alucard-V1.1a For 5.0 LolliPop
Kernel-Alucard-V1.X (AFH Mirror)
Kernel-Alucard-V2.4d For 4.4 Google Edition
Kernel-Alucard-V2.4d-[21-05]-[11-11]-GE-EUR-KK4.4-SGIV-PWR-CORE.zip (Dev-Host Mirror)
Kernel-Alucard-V2.4d-[21-05]-[11-11]-GE-EUR-KK4.4-SGIV-PWR-CORE.zip (MEGA Mirror)
MD5 Sum: 40433965298c861fd45ee413a06caae2
Kernel-Alucard-V2.4a For 4.4 Google Edition [BETA]
Kernel-Alucard-V2.4a-[00-01]-[03-11]-GE-EUR-KK4.4-SGIV-PWR-CORE.zip (Dev-Host Mirror)
Kernel-Alucard-V2.4a-[00-01]-[03-11]-GE-EUR-KK4.4-SGIV-PWR-CORE.zip (Mediafire Mirror)
MD5 Sum: 1cde545ee25fd5c2bf4008cf6cefd353
>>>>>>>>>> TW <<<<<<<<<<
Kernel-Alucard-V2.3ga For 4.4 TW version
Kernel-Alucard-V2.3ga-[20-41]-[11-11]-TW-EUR-KK4.4-SGIV-PWR-CORE.zip (Dev-Host Mirror)
Kernel-Alucard-V2.3ga-[20-41]-[11-11]-TW-EUR-KK4.4-SGIV-PWR-CORE.zip (MEGA Mirror)
MD5 Sum: 226b2924cd5be721a8b859a3d74c3863
Kernel-Alucard-V2.3g For 4.4 TW version
Kernel-Alucard-V2.3g-[00-32]-[09-11]-TW-EUR-KK4.4-SGIV-PWR-CORE.zip (Dev-Host Mirror)
Kernel-Alucard-V2.3g-[00-32]-[09-11]-TW-EUR-KK4.4-SGIV-PWR-CORE.zip (MEGA Mirror)
MD5 Sum: beb2c9adba5377f997fb818f636b73a8
>>>>>>>>>> AOSP V1 (for AOSP ROMs up to 06 August 2014, included CM11 M9) <<<<<<<<<<
Kernel-Alucard-V2.7.2a For 4.4 AOSP version (Obsolete)
Kernel-Alucard-V2.7.2a-[23-02]-[03-09]-AOSP-EUR-KK4.4-SGIV-PWR-CORE.zip (Dev-Host Mirror)
Kernel-Alucard-V2.7.2a-[23-02]-[03-09]-AOSP-EUR-KK4.4-SGIV-PWR-CORE.zip (Mediafire Mirror)
MD5 Sum: bbbee2a886f0e7ffd35efe2541411325
Kernel-Alucard-V2.7.1 For 4.4 AOSP version (Obsolete)
Kernel-Alucard-V2.7.1-[14-57]-[19-08]-AOSP-EUR-KK4.4-SGIV-PWR-CORE.zip (Dev-Host Mirror)
Kernel-Alucard-V2.7.1-[14-57]-[19-08]-AOSP-EUR-KK4.4-SGIV-PWR-CORE.zip (Mediafire Mirror)
MD5 Sum: 830d9533221fc335b2df5698bd8e8eac
>>>>>>>>>> <<<<<<<<<<
Antutu Benchmark (Default Profile):
Quadrant benchmark (Default Profile):
If you like my work, donate with this link:
http://forum.xda-developers.com/donatetome.php?u=4899086
Thread for sharing personal profiles: (Thanks to Jimsilver73, Kantjer, FlanjeUK ......)
http://forum.xda-developers.com/showthread.php?t=2724905
OFFICIAL ALU TEAM TESTERS: smeroni68, Jimsilver73, franzyroy, ronnie498
XDA:DevDB Information
Alucard SGSIV Kernel for GT-I9505, Kernel for the Samsung Galaxy S 4
Contributors
alucard_24, smeroni68, Jimsilver73, franzyroy, ronnie498, AntaresOne
Kernel Special Features:
Version Information
Status: Testing
Current Beta Version: AOSPV2 v1.4pb
Beta Release Date: 2014-11-11
Created 2014-10-06
Last Updated 2014-11-21

Reserved
(CM12.1 ROM LOLLIPOP VERSION):
Code:
Based on my-aospv2-5.1 kernel
[url]https://github.com/Alucard24/Alucard-Kernel-jfltexx/tree/my-aospv2-5.1[/url]
Linux version: 3.4.0
v6.1 - 18/05/2015 (Kernel-Alucard-V1.3ba)
cpu governors and hotplug governors updates!
Selinux updates! Thanks to @dorimanx.
General performance improvements!
PS. It works only for CM12.1 roms 2015/05/13 or later!
v6 - 18/05/2015 (Kernel-Alucard-V1.3b)
cpu governors and hotplug governors updates!
Selinux updates! Thanks to @dorimanx.
General performance improvements!
PS. It works only for CM12.1 roms before 2015/05/13 or OPTIMIZED CM12.1!
v5 - 09/05/2015 (Kernel-Alucard-V1.3a)
Upgraded to linux v.3.4.107
A tons of changes regarding FS, NET, CPUFREQ, MM, USB, MACH-MSM, CPU GOVERNORS, HOTPLUG GOVERNORS, ALUCARD TOUCHBOOST, PROFILES, SCRIPTS etc.....
New STweaks version made by @-+BB+- . He works in my/our group
If someone has battery drain problems caused by Google Play Service bug, he should make active an option on STweaks, "OTHER" tab, called googleplayservicefix.....
(Thanks to @dorimanx)
PS. Kernel works on Unofficial and Official CM12.1 :)
(CM12.0 ROM LOLLIPOP VERSION):
Code:
Based on my-aospv2-4.4 kernel
[url]https://github.com/Alucard24/Alucard-Kernel-jfltexx/tree/my-aospv2-5.0[/url]
Linux version: 3.4.0
v5 - 15/02/2015 (Kernel-Alucard-V1.1a)
Upgraded to linux v.3.4.106
A tons of changes regarding FS, NET, CPUFREQ, MM etc..... (Thanks to @dorimanx)
BT updated(CM kernel)
PS. Kernel works on Unofficial and Official CM12 :)
v4 - 09/12/2014 (Kernel-Alucard-V1.0f)
alucard, nightmare, darkness governors optimization.
PS. Next AntaresOne release should include this kernel.
I have created new account on AFH, so all last and newer kernels will be uploaded there :)
v3 - 06/12/2014 (Kernel-Alucard-V1.0e)
Upgraded kernel to linux 3.4.105.
Optimized alucard_hotplug.
Improved battery consuming. More than 50% less in deepsleep.
Disabled manually phone wakup by pressing touchkey(BACK, MENU) also when phone is charging!!! So no stress for me anymore :)
v2 - 01/12/2014 (Kernel-Alucard-V1.0d)
optimized alucard hotplug governor.
updated ramdisk to latest @antaresone build.
general optimizations.
PS. Menu and Back touch keys that wake up phone is no related to my kernel. It is a lollipop functionality for Nexus, anyway @AntaresOne will remove it with new build.
v1 - 21/11/2014 (Kernel-Alucard-V1.0b) [BETA]
All last AOSPV2 changes.
Fixed radio part. Big Thanks to @AntaresOne.
PS. I am really glad to have a new contributor working with us. His name is @AntaresOne.
(GE ROM LOLLIPOP VERSION):
Code:
Based on official AOSPV2 5.0 kernel:
[url]https://github.com/Alucard24/Alucard-Kernel-jfltexx/tree/my-ge-5.0[/url]
Linux version: 3.4.0
v1 - 17/12/2014 (Kernel-Alucard-V1.1a)
It contains all changes of my CM12 kernel.
Sensors fixed.
(GE ROM KITKAT VERSION):
Code:
Based on official samsung kernel version NB8:
[url]https://github.com/Alucard24/Alucard-Kernel-jfltexx/tree/my-tw-4.4[/url]
Linux version: 3.4.0
v14 - 11/11/2014 (Kernel-Alucard-V2.4d)
Fixed a bug regarding FS SYNC by @Dorimanx. Big Thanks to him
Imported QUICK_WAKEUP module. It give us battery saving during suspend phase and faster wakeup.
Huge updates regarding FS. Big thanks to @dorimanx.
Slimbus overclock to enhance audio quality......
Performance improved.
v13 - 02/11/2014 (Kernel-Alucard-V2.4a)
Look at AOSPV2 Kernel changelog (ver. 1.4oc)
v12 - 05/09/2014 (Kernel-Alucard-V2.2a)
Added GPU UV CONTROL TABLE.
Made i/o read-ahead for Internal sd card configurable by STweaks.
Optimized MM and SCHED.
Update WORKQUEUE to 3.8Y.
Adapted cpu, hotplug governors to new Workqueue.
Tuned intelli_hotplug.
General performace optimizations.
Imported bluetooth drivers from CAF.
It is absolutely recommended to delete /data/.alucard folder before flashing.
v11 - 19/08/2014 (Kernel-Alucard-V2.0)
look at AOSP V2 Changelog :)
v10 - 13/08/2014 (Kernel-Alucard-V1.9c)
Same changes of AOSP Kernel ver 2.7.0b.
Fixed IR. There was a file permission wrong in Ramdisk. Now it works well.
Compiled with new Linaro 4.9 2014-08 compiled by [user=2376110]@dorimanx[/user] with optimization flags. It works very well.
Thanks to @HATrED_ for testing :)
v9 - 10/07/2014 (Kernel-Alucard-V1.8)
Same changes of AOSP Kernel ver 2.6.9.
Upgraded to Linux v.3.4.98
Optimized ondemand governor. Thanks to [user=2376110]@dorimanx[/user]
Tune Kernel Flags after checking with GccOptimizationTests. It seems to provide 4~7% boost in cpu performance. Thanks to [user=2376110]@dorimanx[/user]
Enabled config_cma.
Implement optimized percpu variable access.
Optimized mm.
General performance increment.
Compiled with latest Sabermod 4.9.1(compiled by [user=3306843]@kantjer[/user]). Thanks to him.
PS. Delete folder /data/.alucard before flashing new kernel.
v8 - 14/06/2014 (Kernel-Alucard-V1.7f)
Upgraded to Linux v.3.4.93
Optimized cpu governors (alucard, nightmare, darkness, ondemand, interactive)
Optimized hotplug governors (Alucard_hotplug, intelliplug, MSM_Hotplug)
Optimized cpuboost
Made faux sound control configurable by stweaks. (NEW for GE & TW Kernel)
Enhanced AC/USB Fastcharger and made it configurable by stweaks. Thanks to [user=4325945]@ktoonsez[/user] (NEW for TW Kernel)
Imported LED control and made it configurable by stweaks. Thanks to [user=1546289]@googy[/user]anas. (NEW for AOSP & TW Kernel)
Removed cpu hotplugging (SLEEP) tab on stweaks. It was not so useful.
Removed cpu tuning(SLEEP) tab on stweaks. It was not so useful.
IR should be fixed on GE Kernel for GE 4.4.3 Roms.
Charging animation when phone is turned off works on TW, GE, AOSP Kernel.
GE, TW, AOSP kernels are aligned among them. They contain the same features :)
Imported many commits for SMP, MM, timers etc parts.
Many changes have been done on settings so delete /data/.alucard before flashing the new kernel.
.............................
(TW ROM KITKAT VERSION):
Code:
Based on last TW KK official kernel:
[url]https://github.com/Alucard24/Alucard-Kernel-jfltexx/tree/my-tw-4.4[/url]
Linux version: 3.4.0
v15 - 11/11/2014 (Kernel-Alucard-V2.3ga)
Enabled USB_SAMSUNG_ANDROID_SIDESYNC trying to help some unlucky users for MTP not working. My testers reported that MTP works well. So you all have some problem again, try to fix PC drivers.
Fixed a bug regarding FS SYNC by @Dorimanx. Big Thanks to him
Imported QUICK_WAKEUP module. It give us battery saving during suspend phase and faster wakeup.
Huge updates regarding FS. Big thanks to @dorimanx.
Slimbus overclock to enhance audio quality......
Performance improved.
v14 - 09/11/2014 (Kernel-Alucard-V2.3g For 4.4 TW version)
Fixed permission for int/ext sdcard. Now it works properly.
Huge FileSystem Updates. BIG Thanks to @dorimanx
PM and Suspend updates. BIG Thanks to @dorimanx
Performance improvements.
v13 - 02/11/2014 (Kernel-Alucard-V2.3f For 4.4 TW version)
Look at AOSPV2 Kernel changelog (ver. 1.4oc)
v12 - 23/10/2104 (Kernel-Alucard-V2.3a For 4.4 TW version [BETA])
Kernel based on my AOSPV2 Kernel.
All of last AOSPV2 kernel change.
Updated SCHED.
Optimized all cpu governors.
Optimized alucard hotplug governor.
Optimized all stweaks profiles.
Improved general performance.
v11 - 04/09/2014 (Kernel-Alucard-V2.1a
Added GPU UV CONTROL TABLE.
Made i/o read-ahead for Internal sd card configurable by STweaks.
Optimized MM and SCHED.
Update WORKQUEUE to 3.8Y.
Adapted cpu, hotplug governors to new Workqueue.
Tuned intelli_hotplug.
General performace optimizations.
It is absolutely recommended to delete /data/.alucard folder before flashing.
v10 - 19/08/2014 (Kernel-Alucard-V1.9)
Look at AOSP V2 Changelog.
v9 - 13/08/2014 (Kernel-Alucard-V1.8a)
Same changes of AOSP Kernel ver 2.7.0b.
Compiled with new Linaro 4.9 2014-08 compiled by [user=2376110]@dorimanx[/user] with optimization flags. It works very well.
v8 - 10/07/2014 (Kernel-Alucard-V1.7)
Same changes of AOSP Kernel ver 2.6.9.
Upgraded to Linux v.3.4.98
Optimized ondemand governor. Thanks to [user=2376110]@dorimanx[/user]
Tune Kernel Flags after checking with GccOptimizationTests. It seems to provide 4~7% boost in cpu performance. Thanks to [user=2376110]@dorimanx[/user]
Enabled config_cma.
Implement optimized percpu variable access.
Optimized mm.
General performance increment.
Compiled with latest Sabermod 4.9.1(compiled by [user=3306843]@kantjer[/user]). Thanks to him.
PS. Delete folder /data/.alucard before flashing new kernel.
..............
(AOSP VER. 2 ROM KITKAT VERSION):
Code:
Based on last AOSP official kernel:
[url]https://github.com/Alucard24/Alucard-Kernel-jfltexx/tree/my-aospv2-4.4[/url]
Linux version: 3.4.0
v12 - 09/12/2014 (Kernel-Alucard-V1.4r)
Look at AOSPV5 changelogs :)
v11 - 01/12/2014 (Kernel-Alucard-V1.4qs)
optimized alucard hotplug governor.
general optimizations.
v10 - 19/11/2014 (Kernel-Alucard-V1.4q)
Upgraded workqueue to 3.9Y
Alucard cpu governor optimization.
Cpufreq updates.
Restored some changes for LMK and MM OOM.
Removed I/O scheduler configurable deepsleep mode. It was useless.
General performance increased.
v9 - 11/11/2014 (Kernel-Alucard-V1.4pb)
Fixed a bug regarding FS SYNC by @Dorimanx. Big Thanks to him
Imported QUICK_WAKEUP module. It give us battery saving during suspend phase and faster wakeup.
Huge updates regarding FS. Big thanks to @dorimanx.
Slimbus overclock to enhance audio quality......
Performance improved.
v8 - 09/11/2014 (Kernel-Alucard-V1.4ocm)
Huge FileSystem Updates. BIG Thanks to @dorimanx
PM and Suspend updates. BIG Thanks to @dorimanx
Performance improvements.
v7 - 02/11/2014 (Kernel-Alucard-V1.4oc)
Huge updates regarding "alarm". We have replaced rtc alarm system with a new one. it gives more battery saving during suspend. Thanks to @neobuddy89
BFQ I/O scheduler updated.
Alucard cpu governor tuned. We have two new parameter configurable on stweaks. CPUS_UP_RATE, CPUS_DOWN_RATE.
Alucard hotplug governor enhanced.
Updated SCHED, OOM.
Reverts some changes for LMK. Thanks to @dorimanx
Disabled CMA MEMORY RESERVED. It is useless. Now we have 16MB ram free. Thanks to @dorimanx
Some minor bugfixing.
Improved battery saving on suspend.
General performace improvements.
PS. Thanks to my official testers :)
v6 - 19/10/2014 (Kernel-Alucard-V1.4m)
Fixed msm_thermal control.
General bug fixing on some module.
Imported new wifi drivers from cm kernel but they don't solve wifi bug.
Patched BT drivers. Now BT works like a charm.
Optimized alucard, darkness, nightmare, ondemand cpu governors.
Updated msm_hotplug, alucard_hotplug.
Implemented new module(ALU-T-BOOST) for touch boosting. it is based on cpuboost and it can boost a parametrizable nr of cpus during touching.
Optimized alucard_hotplug and alucard cpu gov sampling time.
Updated Ramdisk scripts. Thanks very much to [user=2376110]@dorimanx[/user].
Fixed a bug on LMK module. Thanks very much to [user=2376110]@dorimanx[/user].
General performance increased!
Added synapse apk into zip flash kernel package. Implemented some status functionalities....... maybe it will replace stweaks in the future...
Thanks to @AndreiLux, [user=2376110]@dorimanx[/user], [user=3795148]@neobuddy89[/user]
PS. we a new official tester. His name is Jimsilver73.
Huge thanks to my official testers(@smeroni68, @jimsilver73) for very good job in testing kernel.
v5 - 04/10/2014 (Kernel-Alucard-V1.4h)
*Merged CPUFREQ fixes that improve performance.
*Merged updates for CPUFREQ and SCHED CORE code.
*Merged HUGE update to Power Manager and QOS Code.
*Replaced old Early Suspend with Power suspend. I am the first one to import this feature for S4. Thanks to [user=3795148]@neobuddy89[/user] and [user=2376110]@dorimanx[/user] for their code.
*Removed DYNAMIC FSYNC. It could cause kernel panic if used with ASYNC FSYNC.
I/O. Performance are reduced but stability is improved :)
*Merged HUGE update to CPUIDLE code.
*Merged HUGE update to Kernel IRQ distribution Domain.
*Merged HUGE update to FileSystem code and Kernel System code.
*Merged NET code update.
*Tuned MSM and Intelli HotPlugs.
*Fixed stuck SuperSU service on boot.
*Added new control to STweaks, that allow to use faster kernel workqueue or more power saver.
*Updated with 3.4.104 main line patches.
*Updated MSM RQ STATS code to better support Default HotPlug
*Merged HUGE update to CPUIDLE code that responsible for CPU sleep and power up on need from IDLE to full power and fast back to idle. Code is very complicated and many bugs are fixed with this huge port from 3.10.y tree.
*Merged HUGE update to Power Mode Domains, this code responsible for powering down drivers on deepsleep and waking them on wakeup.
Many bugs are fixed and many new things added that make this code a lot faster and safe.
*Merged updates to persistent RAM driver.
*Merged code updates to SCHED CORE.
*Merged performance boost code for Cortex A15 CPU that we have!
*Merged serious update from TEGRA 3.10.y kernel for CPUIDLE relaxation. This code will help to save power when CPU is not loaded, so kernel will idle much better and not looping useless CPU cycles. when there is nothing to do.
*Merged SMP and Unalligned patches to speed up the code process.
*Merged CGROUP protection patch.
*Merged updates to Qseecom driver.
*Merged updates to MMC driver. We have new MMC code now.
*Merged latest Seccomp driver.
*Merged updates to android binder.
* Performace improved a lot!
Thanks to [user=2376110]@dorimanx[/user] for part of his changelog. :)
v4 - 20/09/2014 (Kernel-Alucard-V1.4e) [BETA]
Optimized suspend code. (I hope that it fix reboot problem for other users. All works well for me :)
Optimized msm_hotplug.
Optimized msm_rq_stats, needed for msm_mpdecision working.
Optimized blueetooth drivers. Now it doesn't consume battery when phone is in sleep mode and bluetooth is enabled. I tested also exchanging files via bluetooth and all worked well.
Reduced thermal limit temperature to 70°C. So it is sure that phone doesn't reboot while antutu testing....
Some general fixes.
General performance improvements.
It is recommended to delete /data/.alucard folder before flashing new kernel.
PS. Remember this kernel is only for New CM ROM type.
v3 - 11/09/2014 (Kernel-Alucard-V1.4b)
Reverted WORKQUEUE 3.8y updates. They could cause some reboots for someone.
Updated F2FS drivers.
Completely merged with NEW CM KERNEL.
Compiled with Christopher GCC 4.9.2. Thanks to him.
Now we have a new official TESTER for AOSPV2 kernel. His name is @smeroni68. Thanks to him.
Thanks also to @davtse for kernel testing.
v2.2 - 01/09/2014 (Kernel-Alucard-V1.3d)
Added gamma control.
Added GPU UV CONTROL TABLE.
Made i/o read-ahead for Internal sd card configurable by STweaks.
Optimized MM and SCHED.
Update WORKQUEUE to 3.8Y.
Adapted cpu, hotplug governors to new Workqueue.
Tuned intelli_hotplug.
General performace optimizations.
It is absolutely recommended to delete /data/.alucard folder before flashing.
PS. Please don't ask porting all of these changes for other roms. I have worked for so many days and I need to have long period of relaxing :)
For all users that continually ask for new changes..... I develop for fun and try port what I think it is necessary.......
Sometime I try to make also happy some users accepting to implement good changes, but It's me that decide to do this.
v1 - 19/08/2014 (Kernel-Alucard-V1.0c)
Added intelliactive cpu governor.
Added slim cpu governor.
Optimized msm_rq_stats for MPDecision.
Added loki_doki binaries(Only for AOSP and AOSP V2). Kernel can be flashed on other S4 devices different from I9505.
Upgraded bluetooth drivers. Let me know if music stutter again or if change something.....
Added io_is_busy parameters for all cpu governors. It can be configured by STweaks.
Added io_is_busy called hp_io_is_busy for all hotplug governors. It can be configured by STweaks.
Added hotplug_suspend parameters for all hotplug governors. It allow to hotplug governor not to suspend.
Hotplug governor can't be suspended when screen is off by default. Change it if you want.... instead, by STweaks.
Updated cpuboost.
Updated intelli_plug, msm_hotplug.
General performance increased.
Updated Ramdisk. Thanks to [user=2376110]@dorimanx[/user]
Compiled by Linaro 4.9.2 toolchain (by Dorimanx)
For AOSPV2 Kernel (it works with new CM. No RR :) )
..............
(AOSP ROM KITKAT VERSION):
Code:
Based on CM 11.0 official version:
[url]https://github.com/CyanogenMod/android_kernel_samsung_jf/tree/cm-11.0[/url]
Linux version: 3.4.0
v35 - 03/09/2014
Added gamma control.
Added GPU UV CONTROL TABLE.
Made i/o read-ahead for Internal sd card configurable by STweaks.
Optimized MM and SCHED.
Update WORKQUEUE to 3.8Y.
Adapted cpu, hotplug governors to new Workqueue.
Tuned intelli_hotplug.
Added support for MIUI v5 KK.
General performace optimizations.
It is absolutely recommended to delete /data/.alucard folder before flashing.
v34 - 19/08/2014 (Kernel-Alucard-V2.7.1)
Look at AOSP V2 changelog.
v33 - 14/08/2014 (Kernel-Alucard-V2.7.0d)
Upgraded to Linux v.3.4.103
Optimized interactive governor. Thanks to [user=3795148]@neobuddy89[/user].
Fixed MSM MPDecision hotplug. Now all cores work well when system is resumed from suspended state.
Fixed Default MSM Thermal that should work for all hotplug governors and cpu governors.
Compiled with new Linaro 4.9 2014-08 compiled by [user=2376110]@dorimanx[/user] with optimization flags. It works very well.
v32.1 - 10/08/2014 (Kernel-Alucard-V2.7.0b)
Reverted new MSM GPU drivers imported from official CM Kernel. They caused phone rebooting for someone.
Upgraded to Linux v.3.4.102
Optimized ondemand governor. Thanks to [user=2376110]@dorimanx[/user]
Optimized alucard governor.
Optimized interactive governor.
Optimzed Intelliplug, alucard_hotplug, MSM_hotplug hotplug governor.
BIG Patch regarding sched, rcu. Overall smothness is improved. Thanks to [user=3795148]@neobuddy89[/user], [user=2376110]@dorimanx[/user].
Updated CMA, ARM, MM, Random, CPUFREQ, cpuboost, kernel time etc parts. (about 500 commits including sched patch)
Optimized F2FS part. I took last changes from CM kernel.
Implemented new api function to easy configure scaling_min_freq, scaling_max_freq, scaling_governor for each cpu. Now we can set different governor, min/max frequency for each cores using Stweaks.
Imported script updates from Kantjer Ramdisk branch. Thanks to [user=3306843]@kantjer[/user]. (OFF TOPIC: I find out that you are swedish.... I worked in Gothenburg last year for six Months. I like sweden :))
General performance increment.
Many changes on Profiles so It is absolutely recommended to delete /data/.alucard folder before flashing new kernel.
PS. Kernel is not compatible with new CM Nightly rom because I need to patch kernel again. I don't know if I have to start from zero again using last cm kernel and patching all my commits.(about 3000 commits) or merge only new parts. It will take alot of time.
v31 - 10/07/2014 (Kernel-Alucard-V2.6.9b)
Upgraded to Linux v.3.4.98
Optimized ondemand governor. Thanks to [user=2376110]@dorimanx[/user]
Tune Kernel Flags after checking with GccOptimizationTests. It seems to provide 4~7% boost in cpu performance. Thanks to [user=2376110]@dorimanx[/user]
Enabled config_cma.
Implement optimized percpu variable access.
Optimized mm.
General performance increment.
Compiled with latest Sabermod 4.9.1(compiled by [user=3306843]@kantjer[/user]). Thanks to him.
PS. if you come from last 2.6.9 AOSP kernel, you don't need to delete /data/.alucard folder.
v30 - 05/07/2014 (Kernel-Alucard-V2.6.9)
Upgraded to Linux v.3.4.96
Optimized cpu governors (alucard, nightmare, darkness, ondemand, interactive)
Added pump_inc_step_at_min_freq for alucard_governor.
Made Pump_inc_step_at_min_freq, pump_inc_step and pump_dec_step configurable differently on every cpu by stweaks. Increased also freq for responsiveness to 1134000.
Optimized hotplug governors (Alucard_hotplug, intelliplug, MSM_Hotplug)
Optimized cpuboost
Patched sched, mm, kernel time parts.
Added arch_power configurable by stweaks. (it is on by default)
Reverted commit on sched that caused audio problem when phone is in sleep mode.
Increased default maxcoreslimitsleep to 2 cores and increased scaling_max_freq_sleep to 1242000.
Imported general kernel commits.
Many changes have been done on settings so delete /data/.alucard before flashing the new kernel.
v29 - 14/06/2014 (Kernel-Alucard-V2.6.8)
Upgraded to Linux v.3.4.93
Optimized cpu governors (alucard, nightmare, darkness, ondemand, interactive)
Optimized hotplug governors (Alucard_hotplug, intelliplug, MSM_Hotplug)
Optimized cpuboost
Made faux sound control configurable by stweaks. (NEW for GE & TW Kernel)
Enhanced AC/USB Fastcharger and made it configurable by stweaks. Thanks to [user=4325945]@ktoonsez[/user] (NEW for TW Kernel)
Imported LED control and made it configurable by stweaks. Thanks to [user=1546289]@googy[/user]anas. (NEW for AOSP & TW Kernel)
Removed cpu hotplugging (SLEEP) tab on stweaks. It was not so useful.
Removed cpu tuning(SLEEP) tab on stweaks. It was not so useful.
Charging animation when phone is turned off works on TW, GE, AOSP Kernel.
GE, TW, AOSP kernels are aligned among them. They contain the same features :)
Imported many commits for SMP, MM, timers etc parts.
Many changes have been done on settings so delete /data/.alucard before flashing the new kernel.
v28.1 - 05/06/2014 (Kernel-Alucard-V2.6.7la)
Optimized alucard_hotplug, msm_hotplug, intelli_plug.
Optimized alucard, ondemand cpu governors
Optimized cpuboost.
Enhanced FAST CHARGE and made configurable on stweaks. Many options.... :) Thanks to Ktoonsez.
Added Sound Control configurable on Stweaks. Thanks to googyanas. FIXED BY ME :) Headphon PA Gain has been restored to 12 as default. For people that need more power, change it to 20 :)
Fixed charging when phone is turned off. Pressing power to restart phone when it is turned off and connected to AC/USB cable doesn't cause animation loop. TO Restart phone is necessary to hold power button pressed for 2-3 sec. :)
USB HID Keyboard and mouse is restored. It works properly, I have already tested :):)
Added HYBLA as TCP congestion control. Thanks to Kantjer.
General performace increment.
Improved battery consuming (just a bit more) in sleep mode.
DELETE /data/.alucard before flashing new kernel. I have done many changes to profiles. :)
v27 - 31/05/2014 (Kernel-Alucard-V2.6.7g)
Optimized mm.
Optimized sched.
Enabled VMALLOC_SAVINGS by default.
Optimized alucard, darkness, nightmare, ondemand, interactive cpu governors.
Optimized cpuboost.
Optimized alucard_hotplug govenor.
Optimized intelli_plug governor.
We have a new hotplug governor called "msm_hotplug". It is very good and it can be enabled by stweaks. Thanks to [user=2376110]@dorimanx[/user], [user=3795148]@neobuddy89[/user]
Added tcp congestion control configurable by stweaks. Default is cubic.
Added sched_mc_powersaving configurable by stweaks. Default was 2 but now can be configured.
Added gentle fair sleepers configurable by stweaks.
Removed useless cortex tcp, tcp_ram, ipv6 options.
Fixed a bug in cortex awake/sleep switching. Thanks to [user=2376110]@dorimanx[/user].
Now all settings show "kHz" as unit instead of MHz/Hz in stweaks. Thanks to [user=4129455]@Formhault[/user]
Now Cifs can be enabled and should work. Thanks to [user=2376110]@dorimanx[/user].
Removed "CM" profiles overwriting for who use CM ROM with my kernel.
Added two push buttons on stweaks. 1) My XDA thread kernel link. 2) Donation link :)
General performance improvements.
PS. DELETE /data/.alucard folder before flashing new kernel.
v26 - 24/05/2014 (Kernel-Alucard-V2.6.7a)
Upgraded to Linux v.3.4.91
Removed 162, 270 Mhz step frequency. They were useless.
Removed ZRAM, ZCACHE and ZSMALLOC. We have 2gb ram, so we don't care.....
Optimized all cpu governors.
Optimized alucard hotplug governor.
Optimized intelli-thermal.
Set ROW I/O scheduler as default.
Include tcp congestion control in the kernel but it is not configurable on stweaks. Maybe in the next release :)
Use phone as USB KEYBOARD/MOUSE(Thanks to [user=2376110]@dorimanx[/user]):
Base project: [url]https://github.com/pelya/android-keyboard-gadget[/url]
Required app: [url]https://play.google.com/store/apps/details?id=remote.hid.keyboard.client[/url]
Steps:
* Start ADB Debugging
* Start app
* Connect device to system via USB cable
Known minor issue[OLD BOOTLOADER]: Phone can charge when is off, animation is visible but it is necessary to unplug cable and press power for phone booting.
DELETE /data/.alucard before flashing new kernel (Recommended)
UPDATE: [Compiled with new SaberMod 4.8.3 with O3 and all other optimization flags + hard float flag]
v25 - 18/05/2014 (Kernel-Alucard-V2.6.6o)
Upgraded to linux 3.4.90 version.
Imported about 300 commit regarding sched and mm. General performance improved.
Optimized all cpu governors and alucard_hotplug governor.
Removed DVFS touch interface and replace with CPU BOOST. Parameters are configurable on stweaks.
Phone is now much more fast and smooth.
PS. It is recommended to delete /data/.alucard before flashing.
Thanks to Jimsilver73 for testing:)
v24 - 12/05/2014 (Kernel-Alucard-V2.6.6mm [ OFFICIAL TEST]
Upgraded to linux 3.4.89 version.
Alucard_hotplug optimized. Added new parameters for tweaking.
Optimized my cpu governors. Use Power Efficient workqueue.
Adjusted sampling rate for all governors. Thanks to Dorimanx.
Corrected some descriptions. Thanks to Kantjer, FlanjeUK and Jimsilver73.
Removed cpu governor switching during sleep phase.
Phone is smoother and faster than previous version.
Battery consuming should be better during awake phase.
v23 - 07/05/2014 (Kernel-Alucard-V2.6.6m
Compiled with Sabermod 4.10 O3 flags.
Optimized dvfs touch interface. Inserted descriptions. Thanks to Kantjer.
Corrected some descriptions in stweaks. Thanks to Kantjer.
Corrected switching governor during awake/sleep mode.
Changed gpu clk reset rate 1800000 to 27000000(Default). Solved graphical glitches for some games like PVZ2.
v22.2 - 1/05/2014 (Kernel-Alucard-V2.6.6lb [ 1: Compiled with SaberMod 4.10 O3 flags ]
Now we can support cache, data and system as f2fs file system. We can use one or two or all three of them. Many thanks to dorimanx for precious command for identifying partition type without mounting.
UPDATE: Fixed f2fs partition mounting. I tested on last official cm 11.0 ROMS.
v22 - 29/04/2014 (Kernel-Alucard-V2.6.6l [ 1: Compiled with SaberMod 4.8.3 O2 flags | 2: Compiled with SaberMod 4.10 O3 flags ]
Two version compiled with 2 different compiler. You all can test them and let me know which is the best.
Upgraded to linux 3.4.88 version.
Updated BFQ I/O Scheduler.
Optimized Alucard_hotplug governor.
Implemented cpufreq_limit_manager module for limitting frequency when suspended, on call or gps using.
OLD bootloader charging half solution. Phone can charge (as before) and % is visible but it is necessary to unplug AC charger cable and press power as a normal boot.
Improved battery consuming in sleep mode.
Improved performance just a bit more.
Implemented f2fs, ext4 partition detecting during phone boots. Kernel automatically mounts the proper partitions when EXT4 or F2FS... It always necessary a recovery custom for formatting and obviously "cache" and "data" partitions must be formatted as well. (In the future when a recovery supports both filesystem formatting, you don't need to re-flash kernel).
v21- 21/04/2014 (Kernel-Alucard-V2.6.6f)
Optimized alucard_hotplug and intelli_plug hotplug governors for memory consumptions and performance overall.
General performance overall
Fixed Stweaks app that show "Unexpected error" message. It wasn't an error just a textbox on its background. I also fixed cancelling progress dialog delay that show that message.
Compiled kernel with Sabermod GCC 4.8.3. It seems a bit faster and smoother.
Fixed restoring profiles. [NEW]
v20- 16/04/2014 (Kernel-Alucard-V2.6.6da)
Upgraded to linux 3.4.87 version.
Optimized alucard_hotplug.
v19- 13/04/2014 (Kernel-Alucard-V2.6.6c)
Fixed freezes removing optimzed percpu timer commit.
Updated cpu timing function from Linux 3.14.
Updated kernel smp and cpu parts.
Updated driver cpuidle part.
Imported F2FS. Now the kernel include that FS.
Optimized alucard_hotplug.
Optimized kernel workqueue.
Fixed charged icon while phone, turned off, is charging.
Fixed drivers cpufreq.
Removed SuperSU app and related file inside zip kernel. If you all still have problems with losing root it is not kernel fault. I tested with 4 different roms and I have never lost root.
General improvements.
v18- 07/04/2014 (Kernel-Alucard-V2.6.5ib)
Moved Stweaks, system modules inside zip kernel. Now there will not be problems for anyone.
Reduced default hotplug_sampling_rate to 60 ms. Before was 100 ms.
Implement optimized percpu variable access. It should increase performance just a little bit.
...................................................................................................................................

Reserved

Reserved

great
5 Stars for this good kernel
+1

Thanks for your work but I noticed you repo has a lot of branches. what branch is used for AOSP? my-brood-kk I assumed. but I'm not 100% sure

Is nice to see you have your own thread now .
I'm going to test the new kernel now on jamal's RC2 and report on the usage.
Thanks!

Awesome

broodplank1337 said:
Thanks for your work but I noticed you repo has a lot of branches. what branch is used for AOSP? my-brood-kk I assumed. but I'm not 100% sure
Click to expand...
Click to collapse
You are welcome Yes I have two branch for AOSP. (my-cm-11.0 and my-brood-kk)
I have to test and release kernel also for AOSP KK ROM! I need also to import some commits into

i have not rr since L version ....good kernel and good dev ...i like you

Here is a mirror in MEGA:
http://bit.ly/19z3lfb
Cheers!

Alucard Many Thanks from Portugal for your EFFORT.
No RR anymore..

does this kernel have better performance than stock GE kernel? or same? would be awesome a tweaked linaro GE kernel :good:

Alucard you refer that latest kernel release is v2.3.4lg,
i installed but on my kernel version is 2.3.4l, i do not have "lg"
is it ok?

Jmldsilva said:
Alucard you refer that latest kernel release is v2.3.4lg,
i installed but on my kernel version is 2.3.4l, i do not have "lg"
is it ok?
Click to expand...
Click to collapse
Yes it is I forgot to add "g" character into Kernel config, but I can confirm that it is the last one that i have installed on my phone

alucard_24 said:
Yes it is I forgot to add "g" character into Kernel config, but I can confirm that it is the last one that i have installed on my phone
Click to expand...
Click to collapse
Ok, Thanks..:good:

Alucard thanks for your kernel. Are the Bluetooth problems solved with the latest (lg) version as well?

can anyone else confirm that foldermount is operating as it should?
my folders are still not mounting, i have uninstalled and installed it again and again.

khan1989 said:
can anyone else confirm that foldermount is operating as it should?
my folders are still not mounting, i have uninstalled and installed it again and again.
Click to expand...
Click to collapse
i'm to my folder mount still not working

Where is v3...is it not out yet..

Spirit Kernel
This kernel is ONLY for AOSP based ROMs. This will NOT work on the stock Moto roms.
I will update this regularly as I have time and will add new features and fixes as well.
If you have any feature requests or ideas that haven't been seen before, don't hesitate to post it here!!​
PLEASE READ
How to report a bug?
Include the following in your bug report:
The ROM you are currently using + a link to the ROM's thread
A log, preferably dmesgs or kmsgs (use Google to find out how to pull these from your device)
The version of SpiritKernel you use (=rx, e.g.r3)
Bug reports not meeting these requirements will be ignored.
NO BUG REPORTS ON EXPERIMENTAL BUILDS!​
Features
This Hybrid kernel contains features from great kernel devs with like faux,franco and neobuddy,optimized for titan to make it work.Initially there are less features but I will add much more soon
[*]Based on the Latest CyanogenMod sources
[*]Patched 3.4.106 kernel
[*]Governors: ondemand/userspace/powersave/performance/interactive/IntelliMM/inteliidemand/intelliactive/smartmax/pegasusQ
[*]Hotplug: MPDecision/MSM Hotplug/Intelliplug(default)
[*]Intellithermal v2
[*]DT2W/S2W/S2S Wake controls
[*]CPU Underclocking 192Mhz
[*]GPU OC 533Mhz | UC 100Mhz
[*]Add MSM Hotplug Driver
[*]Asynchronous Fsync extracted from HTC
[*]Sweep2Sleep driver
[*]Dynamic management of timer slack
[*]Slimbus OC thanks to neeobuddy89 and poondog
[*]increase Torch power 20mA
[*]Dynamic management of dirty page writebacks
[*]IO: BFQv7r7/FIFO/SIO/FIOPS/ZEN/VR IO Schedulers
[*]Faux Sound Control 3.2
[*]KCAL v2 by @savoca
[*]USB forced fast charge
[*]Stereo call recording support by skvalex
[*]Powersuspend from Faux and yank555-lu *updated to 1.8 after r8*
[*]Kernel Compression: XZ
[*]psx2usb controller
[*]Use Android device as USB keyboard/mouse
[*]optimized ARM RWSEM algorithm.
[*]Ultra Kernel Samepage Merging {UKSM}
[*]FRandom
[*]Dynamic FSync Control
[*]Added Simple GPU Algorithm
[*]WQ_POWER_EFFICIENT for bettery battery life. Hello Battery!!
[*]ANY Kernel
[*]Kexec hardboot patch for Multirom support
[*]TCP: HTCP/HSTCP/HYBLA/VEGAS/SCALABLE/LP/VENO/YEAH/ILLINOIS/WESTWOOD
Optimizations
[*]Compiled Using UBER 5.0.1 SaberMod 4.8 Optimized toolchain for better performance | UBER 4.9 Toolchain after r4
[*]Added optimized ARM RWSEM algorithm.
[*]Disable add_random
[*]Pocketmode and deepsleep for dt2w/s2w
[*]Optimized VFP Module
[*]FIx integer-overflow in veno,vegas
[*]Add sysinterface for GENTLE_FAIR_SLEEPERS
[*]NOATIME and NODIRATIME as default
[*]New 99LMK script by @Pizza_Dox
[*]Nvidia Patches to enhance power efficiency.
[*]Sched optimizations
[*]Increase battery level check interval
[*]writeback: increase bdi_min_ratio to 5
[*]block: cfq: merge tweaked tunables.
[*]Wait just 1 second for other CPU to halt
[*]net: combat buffer bloat
[*]PM: Introduce suspend state PM_SUSPEND_FREEZE
[*]Disable -fconserve-stack on ARM v2
[*]Enable power efficient workqueues by default
[*]do not use msm_run_queue_stats
[*]enable/disable cpu-boost via sysfs
[*]softirq: reduce latencies
[*]Built with Ofast flags
[*]Force SELinux permissive
[*]LowMemoryKiller management of non killable processes
[*]Headset High Performance Mode
[*]Allow CPU-supported unaligned accesses
[*]Enable UNALIGNED_ACCESS
[*]enable ARCH_POWER
[*]lower swappiness
[*]vfp: remove double entries
[*]Disable disable crc check for 30% extra performance in IO
[*]Optimized SLUB memory allocator
[*]Optimize Sfck Compression
[*]set sched_mc_power_savings to 2 (moar powarrrrrrr! saving)
[*]readahead to 256
[*]Built with Graphite flags
[*] Enabled Pipe Flag
TO-Do List
IntelliMM-intelliminmax
New Govs and I/Os
Intelliplug 4.0
GPU OC and UC
* Recommended app for tweaking the kernel: FauxControl,Kernel Auditor or TricksterMod
Recommended settings :
Governor: Intelliactive
I/O Scheduler: Fiops or row
TCP Congestion : Westwood
GPU Governor : Simple Ondemand Or Msm-adreno-tz
Hotplug : Intelliplug ( Keep screen off frequency to 787 MHz )
Powersuspend : Hybrid
Simple GPU Algorithm : On​
How DO I flash this?
Reboot to recovery.
Install zip from SD Card.
Choose the SpiritKernel-Rx-titan.zip
Insatll and Reboot.
Changelog:
Click Me
Downloads:
Basketbuild
Source:
Github(branch:spirit)
Wiki containing changelogs,settings and more
Antutu Score: http://forum.xda-developers.com/showpost.php?p=59736983&postcount=136
Credits goes to these SUPERHUMAN for Inspiration and support (In no specific order)
faux123
Cl3Kener
slukk
luca020400
savoca
Anas Karbila
hurtsky
pinkflozd
YoshiShaPow
Flashhhh
flar2
vigneshrajagopalan
And more
XDA:DevDB Information
Spirit kernel for titan, Kernel for the Moto G 2014
Contributors
DC07
Source Code: https://github.com/DC07/spirit_msm8226
Kernel Special Features: Powersuspend,Ultra KSM,FRandom,Faux Sound,LCD KCAL,DT2W/S2W,Fastcharge and More
Version Information
Status: Stable
Current Stable Version: r13
Stable Release Date: 2015-04-21
Created 2015-03-16
Last Updated 2015-04-21

F.A.Q. - Read this before complaining!
1. My phone exploded, HALP!
A: I don't answer to problems without a log. The log file is in /proc/last_kmsg. Paste it on pastie.org and link it on your post. Logcats are useless for Kernel purposes, don't bother posting them.
2. This kernel works on Y or X rom?
A: Doesn't work with ROMs having different ramdisk or any derivates due to their irresponsibility of using a different ramdisk which needs patches that break stock rom users. Use a different rom and don't bother me.
3. OMG BETTARY SUCKZ, IT DEAD IN 45 MINUTAS, HALP!
A: As you can imagine I don't build kernels to decrease battery life. All the battery life problems come from your apps, either Facebook, or Maps, or some Location Service being enabled etc etc. Check your damn wakelocks and fix them, the kernel is not responsible for them.
4. How do I flash this?
A: Reading the OP, theres a reason why I added instructions on it.
5. What is a data loss? Did I just had one?
A: Data loss is simply having the connection cut for X periods of time, usually few seconds. Grey bars means the device is not connected to Google services for some weird reason, but you'll still have internet connection.
6. OP is arrogant, I'm gonna call the Internet Police?
A: Deal with it.
Settings recommended by our users
metalrules321 said:
Heres what I use and it gives me exceptionally good battery life and perfomance (may differ for others) /using faux-clock app
1.CPU Hotplug
-Intelliplug (I use fauxclock, so cant find the msm hotplug)
-Touch boost on
-Screen off frequency 787 mhz
-Hysterisis value : 8
-Profile : Ecoconservative
-Threshold value 350
2.Thermal Manager
-Intellithermal
-Frequency Throttle temp; 70
-Core throttle temp: 65
3.GPU manager
-Governor: msm-adreno-tz
-simple gpu algorithm
-gpu clock:320
-Simple governor (laziness); 5
-Ramp Threshold: 5
4. IO scheduler
-ROW (for both emmc and sd)
-Read ahead :1024
-Entropy: off
5.Memory Manager
-Zram: Off
-All the other options on
- Swappines:80
-VFS cache pressure : 120
-Dirty ratio:20
-background ratio:5
6.Same page merge
-Intelli ksm enable
-Activation treshold :24
-Cycles per activation 3
-Pages to scan:400
-Scan delay interval :500
7.Battery Control
-Throttling - On
-Temperature threshold :45
-Throttle frequency:787
8.Miscellaneous
- Powe suspend mode: Userspace
-powesuspend: On
-Dynamic file sync: on
-TCP congestion control:Westwood
*Sorry for an awfully long post *:silly:
Click to expand...
Click to collapse

@DC07 wrong kernel tree xd
https://github.com/CyanogenMod/android_kernel_motorola_msm8226/tree/cm-12.0

luca020400 said:
@DC07 wrong kernel tree xd
https://github.com/CyanogenMod/android_kernel_motorola_msm8226/tree/cm-12.0
Click to expand...
Click to collapse
The kernel just works fine with the trees I'm using ATM.

DC07 said:
The kernel just works fine with the trees I'm using ATM.
Click to expand...
Click to collapse
But not in new trees
Now our cm12 uses this kernel and if you flash this one you will broke media ( cannot play/record videos )

Yeah... Thankssss

luca020400 said:
But not in new trees
Now our cm12 uses this kernel and if you flash this one you will broke media ( cannot play/record videos )
Click to expand...
Click to collapse
Oh,I'll rebase it in the next build then.
Thanks for pointing it.

Guys is media [video recording and playing] broken?
As said by luca.Just wanted to confirm if I need to change the base.
Maybe can anyone check on latest CM12 build.

DC07 said:
Guys is media [video recording and playing] broken?
As said by luca.Just wanted to confirm if I need to change the base.
Maybe can anyone check on latest CM12 build.
Click to expand...
Click to collapse
YEa I'm sure
When I tested lp kernel on kk media was broken
And new lp kernel is a way better

Eager to use it on latest Builds and requesting to add kexec support if possible
Sent from my XT1033{LP} using TAPATALK

DC07 said:
Guys is media [video recording and playing] broken?
As said by luca.Just wanted to confirm if I need to change the base.
Maybe can anyone check on latest CM12 build.
Click to expand...
Click to collapse
For me, sometimes it works, but then other times won't.

In blisspop video works for a day...then well i moved to stock 4.4.4 for some testing and optimisation on it btw i'm on xt1068

Hello Guys,
After working off to a new base fixed everything in the new build.
Get it https://s.basketbuild.com/devs/DC07/Spirit/titan
Steps and feature list are on the OP.
Enjoy!!

Help
Hello im a new moto g user and i flashed the latest cm12 nightly. I really want to flash this kernel but im afraid that it wil screw up my phone. I flashed franco and it screw me up. Should i do it? I have backup stockrom

MotoGUser69 said:
Hello im a new moto g user and i flashed the latest cm12 nightly. I really want to flash this kernel but im afraid that it wil screw up my phone. I flashed franco and it screw me up. Should i do it? I have backup stockrom
Click to expand...
Click to collapse
Normal moto g or second generation?
And there isnt even franco kernel for this device lol so ofc you screw up.
If you indeed own a moto g 2nd gen (titan) and your are running latest cm12 nightly it is safe to flash this kernel.

Anas Karbila said:
Normal moto g or second generation?
And there isnt even franco kernel for this device lol so ofc you screw up.
If you indeed own a moto g 2nd gen (titan) and your are running latest cm12 nightly it is safe to flash this kernel.
Click to expand...
Click to collapse
Second gen

What
Sent from my Moto G 2014 using XDA Free mobile app

I did not think the new governors nor Min Freq: 96000

Is there anyway to disable the cpu being clocked at 19000 whenever I touch the screen? It's a feature of CM12, however is there anyway to disable this? I tried putting off mpDecision through Faux123 but it still goes to 19000 even with intelliplug and the user defined option. Any help appreciated!
Thanks,
iG0tB00ts

MotoGUser69 said:
Second gen
Click to expand...
Click to collapse
How the hell you have a Moto G 2nd Gen and flashed Franco Kernel? Franco Kernel is for 1st Gen. lol man you need new eyes, even glasses don't help in this case.
Sent from my Moto G 2014 using XDA Free mobile app

Vision1 Kernel
Working with LineageOS (Sync with LineageOS Kernel Source)
Kernel Version : 4.4.83+
CPU up to little/big 2.0/2.6 GHz
CPU down to little/big 69/69 MHz (300/300 MHz _nuc version)
GPU up to 710 MHz
GPU down to 180 MHz
blu_active, alucard, ondemand, interactive, performance, conservative, powersave, ... CPU Governors - interactive default
ZEN, VR, FIFO, MAPLE, SIO, SIOPLUS and FIOPS IO Scheduler - MAPLE default
IOsched switcher
Adaptive LMK
more TCP Cong - Westwood default
Adreno Idler - default on
Adreno Boost - default off
Backlight dimmer option - default off
Workque Power Saving - default on
Tunable Wakelock
Input Boost - default on
Touch Boost - default off
Soundcontrol
KCAL
DT2W
Wifi driver from CAF
Stock Camera Driver <- use all camera and better picture quality
NTFS FileSystem R/W
SafetyNet patched
Working with Kernel Adiutor (I prefer EX Kernel Manager)
Anykernel Installer
Fingerprint is useable as Homebutton
optimized UBERTC 4.9.4 with mixed -O2/-O3 + pipe + graphite flag
more...
Be careful!!! Make backup before flash. Please report if you find an issue. Thanks
Download @ XDA
Download @ AFH
Thanks to:
LineageOS for base
@RenderBroken for EAS port
codeworkx for working on base
flar2 for patches
sultanxda for patches
UBERTC for toolchain
more
XDA:DevDB Information
[KERNEL][4.4.83+][LOS] Vision1 - fast/smooth/battery-friendly, Kernel for the OnePlus 5
Contributors
AuxXxilium
Source Code: https://github.com/AuxXxilium/kernel-msm8998
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Vision1_2017_08_23
Stable Release Date: 2017-08-23
Created 2017-08-11
Last Updated 2017-08-23

Changelog and more...
Upcoming
Vision1_2017_08_XX
--- anything to do?
Changelog
Vision1_2017_08_23
first build after a complete rebase of the kernel. all upstream patches and the most CAF patches are done. clean merge with all commits.
old and stable WiFi driver
no CPU UC/OC
Vision1_2017_08_21 <- wipe cache
new EAS version with patches from RenderBroken
bring back interactive as default and iosched switch to go to noop if screen is off
WiFi driver update
only little changes
Vision1_2017_08_20
2 versions: a normal one and one without underclock.
CAF - reduced some voltages or make them dynamic
CAF - performance and camera related patches
Build System optimizations
Vision1_2017_08_19
Biggest Bugfix-Build ever
pocket judge working
removed cpu input boost from big cluster
removed temp throttle from big cluster
and much more...
Vision1_2017_08_18
Linux Kernel 4.4.83
go back to UBERTC 4.9.4 <- is smoother than 5.3
some little changes
Vision1_2017_08_17
use UBERTC 5.3
go back -Ofast -> -O2 for stability
battery optimization
more compiler optimization
fix a charging related bug
fix an input delay
tristate-key sync with LOS
remove old camera driver
VisionOne_2017_08_16
new Camera Driver - now we can use all camera
new WiFi Driver
more LOS changes
Careful please: there is a version with new and old memory setup. LOS uses from today the new memory setup. i build both versions because not all custom rom have ported this.
VisionOne_2017_08_15_new_wifi
updated wifi driver from https://review.lineageos.org/#/c/185015/
more...
VisionOne_2017_08_15 <- wipe cache please
Dash fixed
Deepsleep fixed
Fingerprint Homebutton is working with 20170815 build from codeworkx
synced with LineageOS upstream
new CPU Steps 69MHz, 160MHz, 230MHz
set Touchboost --> default off / CPU Input Boost -> default on
Linux Upstream 4.4.79 -> 4.4.82
optimized UBERTC 4.9.4 compiler
mixed -O2/-O3/-Ofast compiler flag for stabilty and speed
more compiler changes
more...
VisionOne_2017_08_13_CAF <- wipe cache after flashing
Sync with CAF Upstream
something more
VisionOne_2017_08_13
Linux 4.4.21 -> 4.4.79
some little fixes for more smoothness
VisionOne_2017_08_12_fix - 177xxx in Antutu - see Screenshots
fix build
faster boot
some little fixes
VisionOne_2017_08_11
initial build

Reserved

Wow!! You are the man who made the best lollipop rom for OP2

I'm going to flash this one, If something goes wrong you'll gift me a new 1+5=?...
Just kidding, Thanks @AuxXxilium..

Amazing
Enviado desde mi ONEPLUS A5000 mediante Tapatalk

I'm going to try this one out right now..Thanks for ur efforts.

angelmakumbe said:
Wow!! You are the man who made the best lollipop rom for OP2
Click to expand...
Click to collapse
thanks. nice to see someone knows me after a long time away.

tested the kernel briefly on Unofficial RR, the UFS speeds seem to be much better than LK or Carbonite... missing the home button though flashing like crazy today, can't catch a break

@AuxXxilium as you've stated in OP home button is not usable, But mine is working fine..

OMG, you are alive still? Used to use your kernel before I learned how to make kernels

AuxXxilium said:
thanks. nice to see someone knows me after a long time away.
Click to expand...
Click to collapse
I remember you from the G2 times too, I used to follow your work back then, I'm happy to see you again. I'll definitely try your kernel and keep my eye on this thread!

Glad to see more kernel devs are supporting us folks on LOS. Flashing this kernel presently.

DespairFactor said:
OMG, you are alive still? Used to use your kernel before I learned how to make kernels
Click to expand...
Click to collapse
i know it's a joke.

thanks.!!
best kernel!!!

AuxXxilium said:
i know it's a joke.
Click to expand...
Click to collapse
Not a joke at all, I used to use your kernel on Nexus 5, I think?

DespairFactor said:
Not a joke at all, I used to use your kernel on Nexus 5, I think?
Click to expand...
Click to collapse
Oh that is nice. Now you are a great dev.

AuxXxilium said:
Oh that is nice. Now you are a great dev.
Click to expand...
Click to collapse
Thanks I am just a noob haha, you didn't want to believe me

I'm running latest Codeworkx build. Home button doesn't work with stock or vision kernel, but works with lightning kernel. Don't know why

Please be careful. i removed the latest version - because it crashes the dash charge. search for the problem and will fix it soon.

DISCLAIMER
I will not be held responsible for anything that happens to your device after flashing this kernel. If you don't know how to bring your dead device back to life please don't make any modifications and stay with stock MIUI. This is only meant for advanced users.
Features :
-Compiled with UBER 6.4.1 TC-
-CPU/GPU O.C[for all variants]-
-Savoca KCAL-
-Blu_active Cpu Gov-
-FIOPS I/O-
-Chacha20 CRNG-
-Adreno Idler-
-Sound Contol-
-Slimbus O.C for better sound quality-
-Vibration Control Intensity-
-ExFat/NTFS Support-
-Toggleable Software CRC-
-TCP congestion Algorithms-
-Misc Changes-
-Spectrum support-
Installation:
-Boot Into Recovery-
-Flash Kernel-
-Wipe Cache and Dalvik (Optional)-
-Reboot!-
Download :
https://www.mediafire.com/folder/5yu4ri9bumpts/Gemini
MiUi-Gemini is for MiUi 9 ( or MiUi 9 based roms )
HMP-Gemini is for LOS or other Los based roms.( w/o EAS support )
EAS-Gemini is for EAS supported roms.
EAS-voxpopuli-Gemini is for EAS supported roms which using Vox Populi Power HAL.
* users should use spectrum to load the kernel settings ( balance profile ) on every boot. *
--------------------------------------------------------------------------------------------------------------------------------------
Credits:
bgcngm-franciscofranco-Sultanxda-flar2-eng.stk-The Flash-frap129-osm0sis
--------------------------------------------------------------------------------------------------------------------------------------
Contributors:
MEGAX91
Source :
https://github.com/GUYVER91/Capricorn

don't dirty Flash my kernel on any other custom kernel , if you are coming from another custom kernel , first flash your Rom's stock kernel through Fastboot , then Flash my kernel.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
these are my kernel settings , you can use them in case you can't use spectrum.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
never post problems without full details of what setup you are using, it's not possible to help that way.
Provide me some logs:
- ADB logcat dump
- /sys/fs/pstore contents
- dmesg dump
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Only use EAS builds alongside EAS supported roms..
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
if you think your battery life is not good enough , use betterbatterystats and find the battery drain causes..

Changelog :
v3.0 :
[HMP Builds] :
-removed OC frequencies ( standard SD820 frequencies are still available for 32GB variant )
-updated Wlan Driver
-updated blu_active CPU Gov
-updated sound control
-updated thermal driver
-updated cpuidle driver
-updated F2FS driver
-memory management improvements
-upstream updates
-bug fixes
[EAS Builds] :
-removed OC frequencies ( standard SD820 frequencies are still available for 32GB variant )
-updated Wlan Driver
-updated sound control
-updated thermal driver
-updated cpuidle driver
-updated F2FS driver
-memory management improvements
-upstream updates
-bug fixes
v2.0 :
[HMP Builds] :
-Merge Last CAF branch LA.UM.5.5.r1-05800-8x96.0
-Updated Wlan Driver
-added hyperx CPU Gov
-added Tripndroid I/O Scheduler
-updated blu_active CPU Gov
-removed qpnp-fg family wakeup sources
-Blocked lot of kernel wakelocks
-updated EXT4 driver
-lot of upstream changes
-Bug Fixes
[EAS Builds] :
-Merge Last CAF branch LA.UM.5.5.r1-05800-8x96.0
-Updated Wlan Driver
-added Tripndroid I/O Scheduler
-added cpu-boost (optimized for EAS)
-removed qpnp-fg family wakeup sources
-Blocked lot of kernel wakelocks
-updated EXT4 driver
-lot of upstream changes
-Bug Fixes
v1.0 :
initial release

a bout EAS :
EAS stands for Energy Aware Scheduling , where the whole governor settings + HMP Settings are replaced by one system relying on "scheduler hints" from specifically modded low-level files including specially modded libs and framework patches.EAS aims to achieve better battery through lowering the product of V * I by altering the voltage along with the frequency dynamically based on loads calculation and the frequency used and many other variables.
EAS will set the core > Frequency > voltage per task. If the scheduler decided that a task needs a higher freq then it supplies that before the task is placed on a core.
Also the great thing about EAS (When tuned and setup properly) is that it is setup to not overshoot and overpower task workload.
Unlike our standard governor like interactive that does sampling and cpu-boost. These both can overshoot the performance needs pf the current workload thus leading to energy loss.
in short : EAS is all about setting the stune groups and the cpusets and using a sched -or schedutil- governor. There has to be an energy model for the SoC so that there is proper energy costs calculation made
*Energy models are the voltage/frequency*

Nice to see this kernel for mi5.
It Should work with Aosp (extended)? It uses schedutil governor by default.
And.does.it have oc.for 32gb version?

RootNightmareX said:
Nice to see this kernel for mi5.
It Should work with Aosp (extended)? It uses schedutil governor by default.
And.does.it have oc.for 32gb version?
Click to expand...
Click to collapse
Reeead the OP! ^^
Second item under features: "CPU/GPU OC [for all variants]"

RootNightmareX said:
Nice to see this kernel for mi5.
It Should work with Aosp (extended)? It uses schedutil governor by default.
And.does.it have oc.for 32gb version?
Click to expand...
Click to collapse
yes , it works on AEX. ( on EAS build , schedutil is the default Gov )
OC is available for all variants.

Phil_Smith said:
Reeead the OP! ^^
Second item under features: "CPU/GPU OC [for all variants]"
Click to expand...
Click to collapse
Preeety sure it wanst there when i red it 1st time

RootNightmareX said:
Preeety sure it wanst there when i red it 1st time
Click to expand...
Click to collapse
Okay, I see. Sorry then.

Waow new kernel again. Great work, thank you..

Min 1,2ghz
Max 1,1ghz freq.
Its normal? Any recommaned freq?

Nice to see your kernel on Gemini! I used to follow it on Kenzo, will try it soon

RootNightmareX said:
Min 1,2ghz
Max 1,1ghz freq.
Its normal? Any recommaned freq?
Click to expand...
Click to collapse
No! min freq is 307200MHz! use spectrum and choose balance profile.

MEGAX91 said:
No! min freq is 307200MHz! use spectrum and choose balance profile.
Click to expand...
Click to collapse
The hmp version also got EAS? Sorry if it's a low question.

Eas works good with Pure Fusion, spectrum balanced mode so far so good.

masterlo3 said:
The hmp version also got EAS? Sorry if it's a low question.
Click to expand...
Click to collapse
No.

MEGAX91 said:
No.
Click to expand...
Click to collapse
Lol thanks. I figured. Downloaded and testing on JDCT AOSP

Thanks for miui kernel. I've used your kernel before on kenzo and it works fine. I hope it works fine too on gemini. Can you add flar2 wake gesture support on miui and los? Please keep update miui kernel. Thank you

can it work on rr roms？

Sheldon Lv said:
can it work on rr roms？
Click to expand...
Click to collapse
Sure it will

Welcome to The HeliosPro Kernel Thread for Galaxy J7 2016
Built with Various Oreo 7870 Source
Linaro GCC 6.1.1
Warning : Me nor XDA Are responsible for any damage that might be caused after flashing any file provided here. Please take caution and be aware of what you are doing. And Always backup !
​
-- Features --
[x]Fake Enforcing (Permissive and shows enforcing)
[x]Compiled with Linaro6.1.1
[x]Native BlueLight Filter To J710X Panel
[x]ADB Insecure
[x]Fake KNOX
[x]Private Mod support
[x]MultiCPU Governors
[x]Multi I/O Schedulers
[x]Multi TCP Algorithms
[x]Limited Wakelocks
[x]Dynamic Fsync 2.0
[x]Fsync
[x]PowerSuspend 1.5
[x]UKSM V1.23
[x]Boeffla wakelock blocker v1.1.0
[x]StateNotifier & SysfsHelper
[x]Optimized ZSwap
[x]Optimized Deadline I/O
[x]Better Input Booster
[x]Quicker Doze entry
[x]Other improvments for Batterylife and performance
[x]Support Android 8.0/8.1
[x]WireGaurd Support
[x]CPU VoltageControl
[x]CPU OC upto 1700MHz
[x]GPU OC Upto 1146MHz
[x]GCC 6/7 Support
[x]CRC Disabled by default
[x]Reduced Wakelocks
[x]GPU/CPU Voltage dropped
[x]Improved GPU Utilization
[x]Improved standby
[x]Adoptable SD patched
[x]Deodex oreo support
[x]Many ram improvments
[x]No sim breaking with 8.1 rooting
[x]Encryption Support for StockRoms
[x]And many more listed in changelogs below
[x]Pre-Rooted
The kernel comes included with EliteTuner to control various kernel parts.
--How to install--
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Open developer options (Press aboutphone > build number 7 times) Enable OEM Unlock
Flash TWRP Recovery that can be found in J710 Section
Fully Wipe internal storage and format data (Must for first time flashing TWRP)
Copy Kernel to your desired Location
Install Zip > Select kernel.zip
Reboot and wait
First time rooting, Open magisk app Once to ensure root is working
--Basic Info --
This kernel is mainly for users who want more than just root, As permissive allows for more flexibility with some of the mods found on xda
You are free to use this kernel in any future rom aslong as you Link this thread / Github Source​
-- Credits --
@ananjaser1211 for this golden kernel and adding support for our device.
@BlackMesa123 and @corsicanu for working with my projects
@topjonhuw For Magisk
@geiti94 For Wifi password Fix
@Noxxxious For general help​And my Elite-Team for their contributions to my projects and being Awesome.​
Download <> Changelog <> More info In second Post
Github Source : https://github.com/ananjaser1211/Helios_7870​
XDA:DevDB Information
HeliosPro Kernel V2.6, Kernel for the Samsung Galaxy J7
Contributors
mohitmallick17, AnanJaser1211, corsicanu
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V2.6
Stable Release Date: 2019-02-27
Created 2019-02-27
Last Updated 2019-02-27

HeliosPro V2.6 Update​
This is TOUCHWIZ only. The new compiler greatly improves performance on both 8.0 and 8.1 Based roms.
Enjoy, i know im not making any roms due to time, but i can support this kernel.
Changelog :-
- Native BlueLight Filter To J710X Panel
- Compiled with Linaro 6.1.1 Compiler
- Performance and battery greatly improved with new compiler
- Fixed custom ramdisk scripts
- Deodex Supported well with magisk
- GMS Blocker
- 99Killer service (kills gms in idle for better sleep)
- NFC Should work now
- More precise cpu voltage
- Magisk 18.1 Included
Follow the Full change log on the Github source.
Download : Google Drive
Size : 29.1MB
HeliosPro Kernel V2.5
Android 8.0/8.1 Only
J710F/FN/G/M/MN/GM (And any J7(6) variant)
​Changelog :-
-Supports both 8.0 and 8.1.1 Stock/Ported TouchWiz Roms
- Updated drivers to latest J530F 8.1 Source
- Adoptable Storage (not tested)
- Encryption Support (on stock roms only)
- Improvements to GPU CPU Over clocking Thanks @renoxtv
- Ensure you have LATEST TWRP otherwise you wont be able to read Internal storage in TWRP
- Removed 160mhz GPU as it didnt work and caused issues
- Fixed CPU Undervolting (overvolting doesnt work well)
- GPU overclocking and Control now works on EliteTuner
- Updated Camera and WiFi to latest 8.1 Firmware
- Magisk 17.2 Included
- some other minor improvements to pretty much everything
Follow the Full change log on the Github source.
old changelog
HeliosPro Kernel V2.0
Android 8.0/8.1 Only
J710F/FN/G/M (And any J7(6) variant)
​
This can be used on any of my 8.0 Roms and tested on stock 8.1 Rom (does not break Simcard when rooting)
its based off multiple exynos7870 sources
P.S : GPU overclocking is not yet completed, you can use it manually with OxygenControl app
instead of EliteTuner app (included in zip)
HeliosPro v2.0 Changelog
- CPU Overclock upto 1.7GHz and VoltageControl
- GPU OverClock Upto 1146GHz
- Memory Mangment improvments
- MMC improvments
- Full Wakelock Control for wlan/bt and much more
- BoefflaWakelock Blocker With preconfigured WLs
- UKSM V1.2.3
- SecBattery control and Unstable current detection
- Powersuspend Driver for display
- Fsync Toggle
- Dynamic FSync
- Tons of I/O Schedulers
- Tons of CPU Governors
- StateNotifier Driver
- CPUFreq optimizations
- DisplayState hooks
- ondemand/conservative cache improvments
- Swap/VNSwap improvments
- WireGuard Support
- F2FS Support
- Frandom Support
- Muted useless debug msgs
- Tons other than can be tracked in commits
I/O Schedulers :-
- Maple
- BFQ
- ROW
- Fifo
- Fiops
- Sio
- SioPlus
- Tripandroid
- VR
- ZEN
CPU Governors :-
- Blu_Active
- CafActive
- hyper
- bioshock
- cultivation
- dancedance
- electrodemand
- impulse
- intellidemand
- ondemandX
- pegasusq
- smartass2
- smartmax
- wheatly2
Source : Github​
RefinedKernel (7.0/7.1.1)
V2.7
-WireGuard Support
-HotSpot Fix for Note 8 port
-CPU Boot frequency reduced
-GPU/CPU Frequency improvments
-InputBooster Changes
-Boosted charging limit
-Updated Ramdisk
-Magisk 16.3 included
---------------------------------
V 2.6
-CPU/GPU Overclocking support
-Support for more variants
-Fixed Magisk resetprop conflict
-Disabled DM-Verity from source
-Fixed KNOX 0X0 PATCH
-Removed Audit Spams in log
-Disabled Samsung RMM
-Disabled RKP/KAP/TIMA From source
-Slight increase to charging current
-Inputbooster ~ 1.2GHz
-CPU OC upto 1700MHz
-GPU OC Upto 1146MHz
-Allow CPU To go as low as 200MHz
---------------------------------
-V2.5
-Magisk V15.2
-Dynamic Fsync 2.0
-HTC Asynchronous Fsync
-PowerSuspend 1.5
-UKSM V1.23
-Boeffla wakelock blocker v1.1.0
-StateNotifier & SysfsHelper
-Optimized ZSwap
-Optimized Deadline I/O
-Better Input Booster
-Quicker Doze entry
-Other improvments for Batterylife and performance
----------------------------------------------------
-V2.0 Note 8 port
Rebuilt the kernel from latest source code : J530FXXU1AQI3
Added CPU Governors
Added I/O Sched
Added TCP Algorithms
Added FakeKnox
Added ResetProp
Added 7.1.1 Support
Added CPU Improvments
Reduced Wakelocks
----------------------------------------------------
-V1.0 Initial release

F.A.Q​Q : What benefits Does this have over stock kernel ?
A : This kernel is aimed at Android enthusiasts who like to get the most out of their phones. But also is user friendly and pre customized for the average user to figure it out
Q : Can i use Kernel Auditor ?
A : Yes, but to utilized the full potential of this kernel including overclock and many more, you should use EliteTuner included in the ZIP
Q : What is Overclocking ?
A : Basically, Slightly more performance For an extra consumption in battery. you can google it for more details
Q : Why is CRC disabled by default ?
A : The extra operations can cause a big hit on Block performance
Q : Is it safe to overclock ?
A : ive tested the kernel on the Max over clock setting (Without turning off the 4 big cores) without any problems for a month
Q : What is SamsungHotplug ?
A : its a feature from samsung that Auto-Disables Inactive Big Cores to reduce power consumption
Q : Why i cant See/set Big cores frequency?
A : thats due to hotplug removing the sysfs files that control the frequency and overwrite them by stock values
Q : Does this kernel Pass SafteyNet ?
A : Yes, The kernel has all the needed bypasses already so it can even bypass safteynet without Magisk
Q : Can i use Knox Apps ?
A : No, You cant use secure Storage, However it has PirvateMode Support built in (if your ROM supports it too)
Q : Can i use this on Stock Rom ?
A : Yes, it works on both Stock and Custom (including 8.0/8.1 Ports)
Q : What is the MAX mAH i can charge at ?
A : charging limits are changed from 1A to 1.5A​

--- Reserved ---​

--- Reserved ---​

WoW. Good Job!
And first comment

how to turn on the blue filter? Stock rom 8.1

alik23kz said:
how to turn on the blue filter? Stock rom 8.1
Click to expand...
Click to collapse
Simple. All you need to do is to push the BlueLightFilter apk from a supported rom 8.0/8.1 to priv-app and make a reboot. Add the toggle for it, or launch it via activity launcher.

Good kernel i installed in oreo fusion

Reset?
I am using Oreo Fusion, do I still need to factory reset or wipe my data?

chechemon said:
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
Click to expand...
Click to collapse
No. You don't need to wipe data or factory reset.
Just flash it!
---------- Post added at 03:19 PM ---------- Previous post was at 02:36 PM ----------
This kernel is good for fix the bluelight filter on OreoFusion Rom. It really fixes it.

chechemon said:
I am using Oreo Fusion, do I still need to factory reset or wipe my data?
Click to expand...
Click to collapse
Flash and done

Can anyone please guide me to compile kernal for nethunter please andr also tell me from which i take source kernal for j710f and the compile it for nethunter

Iam using stock oreo rom 8.1.0 from samsung. I have rooted my phone with magisk and have installed oxygen kernel. Do i have to wipe data and flash this kernel or just flash it.

Sulltan Mehmood said:
Iam using stock oreo rom 8.1.0 from samsung. I have rooted my phone with magisk and have installed oxygen kernel. Do i have to wipe data and flash this kernel or just flash it.
Click to expand...
Click to collapse
Just flash it!

No one is replying me what the heck is that

please also we want a version for AOSP

Kindly update to version 2.7 as it is already released for j7 pro

Kindly compile it to work with some external wifi adapter(WLAN1) and enable ralink drivers please.
I want to use NetHunter with J710F.
Please enable these features kindly, request to OP.

Also port some goodies from oxygen kernel e-g spectrum, new kernel from source and gpu voltage and others please a humble request.. also make sure to increase battery timing with efficient performance with lowest consumption of battery.