Custom kernel for firmwares 4.4.4 based on I9300IUBUBNI2
Code:
transfer modules in kernel
kill some log-spam
disable crc check
optimize touch boost
add dynamic management of dirty page writebacks
add enable / disable cpu-boost via sysfs
add msm hotplug cpu driver
add intelligent hotplug cpu driver with eco mode v4.0
add intelligent thermal driver v2
add dynamic sync control interface v1.5
add powersuspend pm kernel driver for android w / o early suspend v1.5
add sound control v3.4
add color control support for post processing control
add simple gpu algorithm for devfreq based adreno drivers
add support for kernel mode neon
add power efficient workqueue support
add quickwakeup driver
add asynchronous fsync
add cpu governor (adaptive, lagfree, lionheart, nightmare, pegasusq, smartmax, wheatley)
add i / o scheduler (bfq, fifo, fiops, sio, sioplus, tripndroid, vr, zen)
add tcp congestion control (bic, highspeed, htcp, hybla, illinois, lp, scalable, vegas, veno, westwood, yeah)
add gpu overclock to 533mhz
add cpu overclock to 1.6ghz
add gpu underclock to 100mhz
add cpu underclock to 192mhz
enable usb otg
enable router security
fix gpu governor "simple ondemand"
add optimizations for cortex-a7
add qualcomm atheros prima wlan module
build boot for linaro toolchain 4.9.3
Lite version of custom kernel
Code:
transfer modules in kernel
kill some log-spam
disable crc check
optimize touch boost
- add dynamic management of dirty page writebacks
add enable/disable cpu-boost via sysfs
add msm hotplug cpu driver
- add intelligent hotplug cpu driver with eco mode v4.0
add intelligent thermal driver v2
- add dynamic sync control interface v1.5
- add powersuspend pm kernel driver for android w/o early suspend v1.5
add sound control v3.4
add color control support for post processing control
add simple gpu algorithm for devfreq based adreno drivers
add support for kernel mode neon
add power efficient workqueue support
add quickwakeup driver
add asynchronous fsync
add cpu governor (adaptive, lagfree, lionheart, nightmare, pegasusq, smartmax, wheatley)
add i/o scheduler (bfq, fifo, fiops, sio, sioplus, tripndroid, vr, zen)
add tcp congestion control (bic, highspeed, htcp, hybla, illinois, lp, scalable, vegas, veno, westwood, yeah)
- add gpu overclock to 533mhz
- add cpu overclock to 1.6ghz
add gpu underclock to 100mhz
add cpu underclock to 192mhz
enable usb otg
enable router security
fix gpu governor "simple ondemand"
add optimizations for cortex-a7
add qualcomm atheros prima wlan module
build boot for linaro toolchain 4.9.3
For those who have reinforced battery 7000 mah
with the revised file (bms_battery_data) at 6800 mah
Do not use this kernel to CRA ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Recommended Kernel Adiutor to manage your kernel ...
Custom kernel with OTG for firmware 4.4.4
OTG works only with external power supply.
It is sewn from TWRP, any (odex / deodex) firmware without wipe ... Do not forget about backup ...
And as a bonus) ...
1. Support init.d
2. Added Governor - adaptive, conservative, interactive, ondemandplus, wheatley
3. Added planners - fiops, sio, vr, zen
Update:
Custom kernel for firmware 4.4.4+otg+governor+6800mA/h
Developer: usv (4pda)
P.S :Everything works great. And the camera and Wi-Fi. I'm using the latest firmware for Russia-SER-I9300IXWUBOK2
Do not forget to click "Thanks"
Great work
Can You make kernel for TW 5.1.1 like that ?
Tnx... where find sources?
Renix63 said:
Tnx... where find sources?
Click to expand...
Click to collapse
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=gt-i9300i
great work bro
i really appreciate you
you are really great
I waiting for GT-I9301I & CM 12.1 (Rox) device&rom
I have 7200mah Anker battery but any installed kernel installed from this forum not using correct capacity of battery
Only way to use the battery is remove&replace trick.
Is any way to implement the capacity "editing" in other kernels?(flashable zip)
I noticed a bug in the kernel.
The cpu frequency does not tend to go above 998.
Tried all governors. .
Only way is to set up minimum frequency value above 998...
hey man does the otg works???
the otg need a special hardware and it cant be ported or i m wrong?????
I dont believe OTG was work...
Reality was aproximately same as an 1995 opel corsa 1.2 , after some modifications having 6speed, fuel injector with PD, 4 brake discs with abs , 75HP and OTG connector....
Its not impossible, but unbilievable "category"...
OTG works only with external power supply
http://forum.xda-developers.com/galaxy-s3-neo/general/otg-s3-neo-cable-y-variants-t3103230
And look here
Hai @MAXSIMUS96 this kernel awesome and lot more stable and the wonderful thing is that it supports OTG i like this very much.
i used the power otg cable
MAXSIMUS96 said:
OTG works only with external power supply
Click to expand...
Click to collapse
AKA... Otg realy not work....
Solution=
OTG working with this core. http://forum.xda-developers.com/attachment.php?attachmentid=3621334&d=1453698873
The file names should be clear what the core and what it
Without y-cable NOT works... My original kernel works with external power solution Otg.... Works with cm12. 1 too... Works with cm 11...12..and any kernel.... Remove otg line from functions described in first post because its not true...
Í test kernel on i9301i with cm12. 1....works but Wi-Fi and gsm connection not works
I wait for somebody released the version for cm12.1 (battery 7200mah)
Hello,
I have few questions:
1. Is this rom suitable with gti-9301i or is only for 9300?
2. Can I use it wit 4.4.2 stockmod?
3. I have 7000 mah zerolemon battery. what setups should I use?
Thank you
Go_to_sleep said:
Hello,
I have few questions:
1. Is this rom suitable with gti-9301i or is only for 9300?
2. Can I use it wit 4.4.2 stockmod?
3. I have 7000 mah zerolemon battery. what setups should I use?
Thank you
Click to expand...
Click to collapse
Only I9300I
MAXSIMUS96 said:
http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=gt-i9300i
and
https://yadi.sk/d/W5skyqEjgBUvS
Click to expand...
Click to collapse
Hello brother can you please provide me stock i9300i kernel as flasable.zip please?
Really want stock kernel :angel:
medo sator said:
Hello brother can you please provide me stock i9300i kernel as flasable.zip please?
Really want stock kernel :angel:
Click to expand...
Click to collapse
https://mega.nz/#!ZksUGLwS!QjnutzeeNyzz4oE-vGwCRf41pOGlTJB6jsN7JsXpZk8
Stock kernel of the latest firmware I9300IXWUBOK2-Russian
Related
---------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Maguro thread
Here's the Golden Kernel, a modified version of Amperific's A.S.K.P and boype's Fancy. The concept is always to have a hybrid kernel, optimized for galaxy nexus,
in this way there is no more indecision about which kernel flash because this Golden is an all-in-one. This kernel also includes many features of the latest versions of the linux kernel (3.4/3.8+)
A slim, fast and smooth kernel for enjoying your phone.
Well, let's go into serious business
Kernel features
1.0/1.2
Linux Kernel 3.0.88
Linaro optimized
Fast charge enabled
Proportional Rate Reduction for TCP
Updated LowMemoryKiller driver (directly from 3.9 experimental kernel)
Added fully functional zCache and ZsmAlloc, backported from 3.4 kernel
Make zRam LZ4 decompressor work faster in the same CPU cycles
Introduce Dynamic Cache Pressure (now you need the correct binary to compile this kernel)
Revise Dynamic Writeback algorithm
Deep Sleep tweaks
Introduce Timer Slack Controller
Dynamic PLL Overclock
CPU Unaligned Access (much faster booting time because of better kernel decompression)
Add newest Adaptive RED Net Scheduler from 3.4 kernel and make it default.
Backport OOM Killing algorithm from 3.8 kernel
Backport LowMemoryKiller and Timed GPIO drivers from 3.8 kernel
CFS kernel scheduler optimization
Predefine minfree and adj values
Latest Generic Hotplug Helper from 3.10
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Tuned SmartassH3 to make more use of low frequencies (it's always recommended "Golden gov")
Buffer values updated from Samsung original sources(Triple Buffering, Camera)
Writeback tweaked to do the work only when the screen is off
New Golden Governor (what Golden governor does)
Linked boostpulse interface to this governor
GPU optimizations
Frame buffer member of project butter
More deep sleap tweaks
New LMK machine
Introduce Dynamic Cache Pressure
updated HSMMC driver
RM CPU topology: multi-core scheduling
PGM support (still experimental, the dev of PGM app should add this kernel into his working list)
battery life extender (BLX)
custom voltage control
init.d support
selected patches from Google
TCP congestion control algorithms: westwood (default), cubic, reno
compiled with Google GCC 4.7 toolchain
control to set a minimum CPU frequency for screen-on (default: 384 MHz)
Optimized ext4 mount options
307MHz to 512MHz GPU as indicated in filename
Offering lowered voltages
Sound Control with PureAudio values (yeah man, rock your world)
SAS controller
Fixed wifi! (In 4.2.2 version and 4.3)
Updated LZ4 compression from 3.8 drivers
Finetuned Golden governor
Better performances, better battery life
TouchSense+ linked from touchscreen drivers
Gamma control with external module (only in 4.2.2 version)
System lagfixes
Frequencies revisited with entropy control
PGM support
Elevated SystemUI priority
Temperature control
zRam module updated from 3.10 kernel
Dynamic predefine Undervolt
GPU code Improvements
LZ4 references to /kernel folder
SpeedUp Boost
BuiltIn module for WLAN thanks to amperific
Finetuned Westwood TC Protocol
ION Memory Allocator backported from 3.10 kernel
LMK Plus machine ported from 2.3.6.39 kernel (even if it's an old version, it's the most fastest on the market)
Removed Google Snappy
zsmalloc updated into Golden Governor
Finetuned SioPlus shed
Updated ROW I/O from 3.10 kernel
1.3/1.6
Bug fixes, stable relase
New GoldenX governor
Added GoldenX GPU control
Fixed freq
Kernel Samepage Merging enabled by default
Added BoostPulse interface
Linked BoostPulse to the touchscreen driver (now the governor can really "sense" a touch and boost the frequency after a specific time threshold)
Fixed the Deep Sleep states verification for scaling
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Added LowBattery Powersave feature for goldenX and interactive governors
ROW I/O algorithm revisited from 3.10 kernel
ISIX ROW interface for more stability
New experimental "Zen" sheduler
Re-switched to Linux Kernel 3.0.89
Improved touch drivers
New Golden I/O Scheduler (what golden sheduler does)
Fast latency algorithm
Smart screen wakeclock
RCU boost and systicl tweaks (now your phone should work like butter)
BLD (Battery Low Drain)
Wakelock tweaks for WLAN and LTE modem from 3.8 kernel
User voltage control
Backport interactive patches to interactiveX of 3.4 kernel
Lot of logging disabled (fastest phone boot time)
Updated GPU Drivers for more smoothness
New GoldenX2 governor
Better freq. scaling
BLS (Battery life saver) when the battery is on >5%
Updated idle parameters
Finetuned entropy boost
Finetuned C4 queue
VM, Filesystem, and other governor tweaks
Updated Hybla and Illinois TCP Congestion
Dynamic Readahead
Low Memory Killer from 3.10 Kernel
Sysctl Vm Optimizations at boot
Fastcharge control
DTIM skip override (what DTIM does)
Revisited Golden I/O Scheduler and updated its driver to 3.10 kernel
Fixed all freq. scaling on 3.4 kernel
Added power.tuna.so into the 4.3 kernel's zip
Tweaked GoldenX2 governor (for now the best Golden Gov. than ever)
Revisited Hybla TCPC (with totally new values for ipv4 optimizations, probably I'll make a Golden TCP Congestion)
Revisited Westwood TCPC
Undervolt down to (0-1-2-3-6) (less battery drain with high frequencies)
RAB algorithm from experimental 3.11 kernel
Tweaked Golden I/O Scheduler (now with the fastest latency on the planet)
Updated BLX
Revisited PGM support, now It's all on the dev's hands
1.7
Linux Kernel 3.0.94
New Golden TCP Congestion
New .net buffer algorithm
Part of NetProjectX (developed by me, this is a set of tweaks for this kernel fully available from 2.0 version)
3g speedup (now the 3g is faster, but without consuming data traffic)
Backported i2c bus drivers from 3.11 experimental kernel and made them fully working
Revisited Reno TCPC with 3.8 kernel parameters
Sakis3g algorithm (theorical support for 3g USB keys)
Switched-off a lot of debugging (faster boot time)
New Injector system for the kernel .zip
Wi-Fi speedup with 3mbps download peak
New GoldenX3 governor
Sensitive workload algorithm from 3.9 kernel
New low battery profile (when the battery is <15)
New CpuProjectX undervolt (another 2.0 feature)
Code cleanups
1.8.3
Working 1.8 kernel (tested from more than 3 users here is one feedback)
Wifi fixed
4.4 CM official sources
Added support for Touch Control
New KitKat ramdisk directly from Fancy Kernel (now all should work)
First version of the "New Golden Kernel" [NGK]
Disabled ASRAM due gamma color problems (I'm working on it)
New GoldenKat TCPC, try this awesome stuff!
New GoldenUltimate governor with the new SMART Pro Scaling
New undervolt system up to 1-2-1-3-4
Powersave profile directly from "Conservative"
KK Ram management with HyperBoost2 (erase the useless ram every 30 min)
New GoldenKatIO sheduler: KitKat is optimized for 512MB of ram? Let's use our 1024MB!
Various small fixes from Linux Kernel 3.0.101
Ramdisk optimizations
Downloads
Wipe Dalvik and Cache partition before flashing this kernel
Android 4.4
Download 4.4 XXH10K3 - Latest
Android 4.3
Download 4.3 XXG09J - Latest
Download 4.3 XXE07J
Sources: https://github.com/Jeeko/golden_kernel_4.4
Nice work, more new stuff to play with.
Jeeko said:
This kernel is compatible with Android 4.2.x if you want a version for 4.3 just tell me
Click to expand...
Click to collapse
4.3 version please.
+1 for 4.3 kernel with PGM support
swyped from my maguro
1haumann1 said:
+1 for 4.3 kernel with PGM support
swyped from my maguro
Click to expand...
Click to collapse
+1 to this
Does this kernel has ION-enabled?
Thanks,
Rinse
Looks good. But need 4.3 one yes lol. 4.2.2 is so 2012 lol
grtz from the crazy basterd from holland. powered by pzosp/purity 4.3 and askp kernel
TheRinseM said:
Does this kernel has ION-enabled?
Thanks,
Rinse
Click to expand...
Click to collapse
Yes, It has ION memory allocator I have to plan the OP better
WIFI doesn't work for me. Can anyone confirm?
nailz420 said:
WIFI doesn't work for me. Can anyone confirm?
Click to expand...
Click to collapse
For the wi-fi I have to made a fixed module, stay tuned
nailz420 said:
WIFI doesn't work for me. Can anyone confirm?
Click to expand...
Click to collapse
Jeeko said:
For the wi-fi I have to made a fixed module, stay tuned
Click to expand...
Click to collapse
I can confirm. WIFI module broken. Waiting for fix
would love to see a 4.3 version !!
Ok guys, here's the 4.3 verison
http://d-h.st/UkJ
Enjoy
Jeeko said:
Ok guys, here's the 4.3 verison
http://d-h.st/UkJ
Enjoy
Click to expand...
Click to collapse
Wi-Fi works?
swyped from my maguro
1haumann1 said:
Wi-Fi works?
swyped from my maguro
Click to expand...
Click to collapse
Just tested on CM10.2, nope, wait for the module
1haumann1 said:
Wi-Fi works?
swyped from my maguro
Click to expand...
Click to collapse
Mhh, I don't think
Jeeko said:
Yes, It has ION memory allocator I have to plan the OP better
Click to expand...
Click to collapse
Awh yeah! Can i use this as my HTC sense 5.0 base ?
Thanks in advance! Cool kernel!
Looks promising.... Waiting for the WiFi module fix to try out.
Sent from my Galaxy Nexus using xda app-developers app
Other than Wifi, the golden governor is really smooth. Smoother than interactive. I like. :good:
TheRinseM said:
Awh yeah! Can i use this as my HTC sense 5.0 base ?
Thanks in advance! Cool kernel!
Click to expand...
Click to collapse
Sure
For the wi-fi fixing I'm looking for a solution, I hope I'll fix it asap
When you have fix, ill start using it!
Sent from my HTC Desire HD using Tapatalk 4 Beta
---------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Toroplus thread
Here's the Golden Kernel, a modified version of Amperific's A.S.K.P and boype's Fancy. The concept is always to have a hybrid kernel, optimized for galaxy nexus,
in this way there is no more indecision about which kernel flash because this Golden is an all-in-one. This kernel also includes many features of the latest versions of the linux kernel (3.4/3.8+)
A slim, fast and smooth kernel for enjoying your phone.
Well, let's go into serious business
Kernel features
1.0/1.2
Linux Kernel 3.0.88
Linaro optimized
Fast charge enabled
Proportional Rate Reduction for TCP
Updated LowMemoryKiller driver (directly from 3.9 experimental kernel)
Added fully functional zCache and ZsmAlloc, backported from 3.4 kernel
Make zRam LZ4 decompressor work faster in the same CPU cycles
Introduce Dynamic Cache Pressure (now you need the correct binary to compile this kernel)
Revise Dynamic Writeback algorithm
Deep Sleep tweaks
Introduce Timer Slack Controller
Dynamic PLL Overclock
CPU Unaligned Access (much faster booting time because of better kernel decompression)
Add newest Adaptive RED Net Scheduler from 3.4 kernel and make it default.
Backport OOM Killing algorithm from 3.8 kernel
Backport LowMemoryKiller and Timed GPIO drivers from 3.8 kernel
CFS kernel scheduler optimization
Predefine minfree and adj values
Latest Generic Hotplug Helper from 3.10
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Tuned SmartassH3 to make more use of low frequencies (it's always recommended "Golden gov")
Buffer values updated from Samsung original sources(Triple Buffering, Camera)
Writeback tweaked to do the work only when the screen is off
New Golden Governor (what Golden governor does)
Linked boostpulse interface to this governor
GPU optimizations
Frame buffer member of project butter
More deep sleap tweaks
New LMK machine
Introduce Dynamic Cache Pressure
updated HSMMC driver
RM CPU topology: multi-core scheduling
PGM support (still experimental, the dev of PGM app should add this kernel into his working list)
battery life extender (BLX)
custom voltage control
init.d support
selected patches from Google
TCP congestion control algorithms: westwood (default), cubic, reno
compiled with Google GCC 4.7 toolchain
control to set a minimum CPU frequency for screen-on (default: 384 MHz)
Optimized ext4 mount options
307MHz to 512MHz GPU as indicated in filename
Offering lowered voltages
Sound Control with PureAudio values (yeah man, rock your world)
SAS controller
Fixed wifi! (In 4.2.2 version and 4.3)
Updated LZ4 compression from 3.8 drivers
Finetuned Golden governor
Better performances, better battery life
TouchSense+ linked from touchscreen drivers
Gamma control with external module (only in 4.2.2 version)
System lagfixes
Frequencies revisited with entropy control
PGM support
Elevated SystemUI priority
Temperature control
zRam module updated from 3.10 kernel
Dynamic predefine Undervolt
GPU code Improvements
LZ4 references to /kernel folder
SpeedUp Boost
BuiltIn module for WLAN thanks to amperific
Finetuned Westwood TC Protocol
ION Memory Allocator backported from 3.10 kernel
LMK Plus machine ported from 2.3.6.39 kernel (even if it's an old version, it's the most fastest on the market)
Removed Google Snappy
zsmalloc updated into Golden Governor
Finetuned SioPlus shed
Updated ROW I/O from 3.10 kernel
1.3/1.6
Bug fixes, stable relase
New GoldenX governor
Added GoldenX GPU control
Fixed freq
Kernel Samepage Merging enabled by default
Added BoostPulse interface
Linked BoostPulse to the touchscreen driver (now the governor can really "sense" a touch and boost the frequency after a specific time threshold)
Fixed the Deep Sleep states verification for scaling
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Added LowBattery Powersave feature for goldenX and interactive governors
ROW I/O algorithm revisited from 3.10 kernel
ISIX ROW interface for more stability
New experimental "Zen" sheduler
Re-switched to Linux Kernel 3.0.89
Improved touch drivers
New Golden I/O Scheduler (what golden sheduler does)
Fast latency algorithm
Smart screen wakeclock
RCU boost and systicl tweaks (now your phone should work like butter)
BLD (Battery Low Drain)
Wakelock tweaks for WLAN and LTE modem from 3.8 kernel
User voltage control
Backport interactive patches to interactiveX of 3.4 kernel
Lot of logging disabled (fastest phone boot time)
Updated GPU Drivers for more smoothness
New GoldenX2 governor
Better freq. scaling
BLS (Battery life saver) when the battery is on >5%
Updated idle parameters
Finetuned entropy boost
Finetuned C4 queue
VM, Filesystem, and other governor tweaks
Updated Hybla and Illinois TCP Congestion
Dynamic Readahead
Low Memory Killer from 3.10 Kernel
Sysctl Vm Optimizations at boot
Fastcharge control
DTIM skip override (what DTIM does)
Revisited Golden I/O Scheduler and updated its driver to 3.10 kernel
Fixed all freq. scaling on 3.4 kernel
Added power.tuna.so into the 4.3 kernel's zip
Tweaked GoldenX2 governor (for now the best Golden Gov. than ever)
Revisited Hybla TCPC (with totally new values for ipv4 optimizations, probably I'll make a Golden TCP Congestion)
Revisited Westwood TCPC
Undervolt down to (0-1-2-3-6) (less battery drain with high frequencies)
RAB algorithm from experimental 3.11 kernel
Tweaked Golden I/O Scheduler (now with the fastest latency on the planet)
Updated BLX
Revisited PGM support, now It's all on the dev's hands
1.7
Linux Kernel 3.0.94
New Golden TCP Congestion
New .net buffer algorithm
Part of NetProjectX (developed by me, this is a set of tweaks for this kernel fully available from 2.0 version)
3g speedup (now the 3g is faster, but without consuming data traffic)
Backported i2c bus drivers from 3.11 experimental kernel and made them fully working
Revisited Reno TCPC with 3.8 kernel parameters
Sakis3g algorithm (theorical support for 3g USB keys)
Switched-off a lot of debugging (faster boot time)
New Injector system for the kernel .zip
Wi-Fi speedup with 3mbps download peak
New GoldenX3 governor
Sensitive workload algorithm from 3.9 kernel
New low battery profile (when the battery is <15)
New CpuProjectX undervolt (another 2.0 feature)
Code cleanups
Downloads
Wipe Dalvik and Cache partition before flashing this kernel
Android 4.2.x
Download Milestone XXG09 - Latest
Download Milestone XXF08
Android 4.3
Download 4.3 XXG09J - Latest
Download 4.3 XXE07J
Sources: https://github.com/Jeeko/Golden_Kernel_4.3
Dling now! Thanks!
Sent from my Galaxy Nexus using xda premium
RSVP..
Thank you
My Almighty Nexus powered by MMuzzy's Vanilla extract 4.3 & ASKP kernel
Thanks for bringing this over!
Sent from my Galaxy Nexus using xda app-developers app
Been running this kernel and also beta test and excellent battery life phone is much snappier
Sent from my Galaxy Nexus using xda app-developers app
Awesome!! Thanks for this. We need more new kernels.
Sent from my Galaxy Nexus using Tapatalk 4
Anyone getting good battery life? I try sioplus with golden governer n drain my battery fast
Sent from my Galaxy Nexus using xda app-developers app
trying this out now.
Thanks. :good:
Ok ladies and gentleman, new version, new GoldenX governor, new TouchBoost interface. Probably the first tuna kernel to have the ISIX ROW features, but I can't say you all, check the changelogs The most stable relase for now.
Enjoy
For the 1.4 version I'm planning a reduction of radio frequency (less radiation, more health)
But it is not all... stay tuned!
downloading 1.3 now. 1.2 was working really well for me.
Jeeko said:
Ok ladies and gentleman, new version, new GoldenX governor, new TouchBoost interface. Probably the first tuna kernel to have the ISIX ROW features, but I can't say you all, check the changelogs The most stable relase for now.
Enjoy
For the 1.4 version I'm planning a reduction of radio frequency (less radiation, more health)
But it is not all... stay tuned!
Click to expand...
Click to collapse
but but but I like glowing in the dark. :laugh:
For now this is going yo be my daily feels snappier then anything I tried and don't need and mods like cross breeder to make it fast! Will report back on battery in a few days!
Sent from my Galaxy Nexus using Tapatalk 2
Phone won't go into deep sleep. Stuck at 384.
Sent from my Galaxy Nexus using xda app-developers app
jeffreynothing43 said:
Phone won't go into deep sleep. Stuck at 384.
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
Hit thanks button by accident. Use better battery stats to find your rogue app. I HIGHLY doubt its a kernel issue. Deep sleep is just fine here.
Sent from my Galaxy Nexus using Tapatalk 4
tommy0823 said:
Hit thanks button by accident. Use better battery stats to find your rogue app. I HIGHLY doubt its a kernel issue. Deep sleep is just fine here.
Sent from my Galaxy Nexus using Tapatalk 4
Click to expand...
Click to collapse
+1
Sent from my Galaxy Nexus using Tapatalk 2
Ok guys... new Golden Kernel means new Golden I/O Scheduler (I'm planning the wiki) now your phone should run like butter /Wipe chache e Data, always!!
Enjoy
Well, new update (1.5) with this new version I have introduced the new GoldenX2 governor: a GoldenX governor less aggressive, so more battery friendly but more fast, smooth and clean. A lot of news, read the changelog
Enjoy!
P.S. Wifi or 3g network? Now there aren't more differences
Here's all! The 1.6 version should be a major update but let's see the new higlight features like a totally new Hybla TCP Congestion, or the new Undervolt (enjoy high freqs with low battery drain).
Enjoy also the GoldenX2 gov and Golden I/O both tweaked for the better experience on the planet
For more info ceck the changelogs
CWM said the zip isn't signed when attempting to flash.
My Almighty Galaxy Nexus powered by PA 3.68 & ASKP kernel
info[]box1 said:
CWM said the zip isn't signed when attempting to flash.
My Almighty Galaxy Nexus powered by PA 3.68 & ASKP kernel
Click to expand...
Click to collapse
Flashed perfectly with twrp man. Maybe a bad DL?
Sent from my Galaxy Nexus using cm10.2 unofficial 4.3 golden kernel and Tapatalk 2
---------------------------------------------------------------------------------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Toro thread
Here's the Golden Kernel, a modified version of Amperific's A.S.K.P and boype's Fancy. The concept is always to have a hybrid kernel, optimized for galaxy nexus,
in this way there is no more indecision about which kernel flash because this Golden is an all-in-one. This kernel also includes many features of the latest versions of the linux kernel (3.4/3.8+)
A slim, fast and smooth kernel for enjoying your phone.
Well, let's go into serious business
Kernel features
1.0/1.2
Linux Kernel 3.0.88
Linaro optimized
Fast charge enabled
Proportional Rate Reduction for TCP
Updated LowMemoryKiller driver (directly from 3.9 experimental kernel)
Added fully functional zCache and ZsmAlloc, backported from 3.4 kernel
Make zRam LZ4 decompressor work faster in the same CPU cycles
Introduce Dynamic Cache Pressure (now you need the correct binary to compile this kernel)
Revise Dynamic Writeback algorithm
Deep Sleep tweaks
Introduce Timer Slack Controller
Dynamic PLL Overclock
CPU Unaligned Access (much faster booting time because of better kernel decompression)
Add newest Adaptive RED Net Scheduler from 3.4 kernel and make it default.
Backport OOM Killing algorithm from 3.8 kernel
Backport LowMemoryKiller and Timed GPIO drivers from 3.8 kernel
CFS kernel scheduler optimization
Predefine minfree and adj values
Latest Generic Hotplug Helper from 3.10
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Tuned SmartassH3 to make more use of low frequencies (it's always recommended "Golden gov")
Buffer values updated from Samsung original sources(Triple Buffering, Camera)
Writeback tweaked to do the work only when the screen is off
New Golden Governor (what Golden governor does)
Linked boostpulse interface to this governor
GPU optimizations
Frame buffer member of project butter
More deep sleap tweaks
New LMK machine
Introduce Dynamic Cache Pressure
updated HSMMC driver
RM CPU topology: multi-core scheduling
PGM support (still experimental, the dev of PGM app should add this kernel into his working list)
battery life extender (BLX)
custom voltage control
init.d support
selected patches from Google
TCP congestion control algorithms: westwood (default), cubic, reno
compiled with Google GCC 4.7 toolchain
control to set a minimum CPU frequency for screen-on (default: 384 MHz)
Optimized ext4 mount options
307MHz to 512MHz GPU as indicated in filename
Offering lowered voltages
Sound Control with PureAudio values (yeah man, rock your world)
SAS controller
Fixed wifi! (In 4.2.2 version and 4.3)
Updated LZ4 compression from 3.8 drivers
Finetuned Golden governor
Better performances, better battery life
TouchSense+ linked from touchscreen drivers
Gamma control with external module (only in 4.2.2 version)
System lagfixes
Frequencies revisited with entropy control
PGM support
Elevated SystemUI priority
Temperature control
zRam module updated from 3.10 kernel
Dynamic predefine Undervolt
GPU code Improvements
LZ4 references to /kernel folder
SpeedUp Boost
BuiltIn module for WLAN thanks to amperific
Finetuned Westwood TC Protocol
ION Memory Allocator backported from 3.10 kernel
LMK Plus machine ported from 2.3.6.39 kernel (even if it's an old version, it's the most fastest on the market)
Removed Google Snappy
zsmalloc updated into Golden Governor
Finetuned SioPlus shed
Updated ROW I/O from 3.10 kernel
1.3/1.6
Bug fixes, stable relase
New GoldenX governor
Added GoldenX GPU control
Fixed freq
Kernel Samepage Merging enabled by default
Added BoostPulse interface
Linked BoostPulse to the touchscreen driver (now the governor can really "sense" a touch and boost the frequency after a specific time threshold)
Fixed the Deep Sleep states verification for scaling
Added Sampling Down Momentum for dinamically changing the factor for scaling down
Added LowBattery Powersave feature for goldenX and interactive governors
ROW I/O algorithm revisited from 3.10 kernel
ISIX ROW interface for more stability
New experimental "Zen" sheduler
Re-switched to Linux Kernel 3.0.89
Improved touch drivers
New Golden I/O Scheduler (what golden sheduler does)
Fast latency algorithm
Smart screen wakeclock
RCU boost and systicl tweaks (now your phone should work like butter)
BLD (Battery Low Drain)
Wakelock tweaks for WLAN and LTE modem from 3.8 kernel
User voltage control
Backport interactive patches to interactiveX of 3.4 kernel
Lot of logging disabled (fastest phone boot time)
Updated GPU Drivers for more smoothness
New GoldenX2 governor
Better freq. scaling
BLS (Battery life saver) when the battery is on >5%
Updated idle parameters
Finetuned entropy boost
Finetuned C4 queue
VM, Filesystem, and other governor tweaks
Updated Hybla and Illinois TCP Congestion
Dynamic Readahead
Low Memory Killer from 3.10 Kernel
Sysctl Vm Optimizations at boot
Fastcharge control
DTIM skip override (what DTIM does)
Revisited Golden I/O Scheduler and updated its driver to 3.10 kernel
Fixed all freq. scaling on 3.4 kernel
Added power.tuna.so into the 4.3 kernel's zip
Tweaked GoldenX2 governor (for now the best Golden Gov. than ever)
Revisited Hybla TCPC (with totally new values for ipv4 optimizations, probably I'll make a Golden TCP Congestion)
Revisited Westwood TCPC
Undervolt down to (0-1-2-3-6) (less battery drain with high frequencies)
RAB algorithm from experimental 3.11 kernel
Tweaked Golden I/O Scheduler (now with the fastest latency on the planet)
Updated BLX
Revisited PGM support, now It's all on the dev's hands
1.7
Linux Kernel 3.0.94
New Golden TCP Congestion
New .net buffer algorithm
Part of NetProjectX (developed by me, this is a set of tweaks for this kernel fully available from 2.0 version)
3g speedup (now the 3g is faster, but without consuming data traffic)
Backported i2c bus drivers from 3.11 experimental kernel and made them fully working
Revisited Reno TCPC with 3.8 kernel parameters
Sakis3g algorithm (theorical support for 3g USB keys)
Switched-off a lot of debugging (faster boot time)
New Injector system for the kernel .zip
Wi-Fi speedup with 3mbps download peak
New GoldenX3 governor
Sensitive workload algorithm from 3.9 kernel
New low battery profile (when the battery is <15)
New CpuProjectX undervolt (another 2.0 feature)
Code cleanups
Downloads
Wipe Dalvik and Cache partition before flashing this kernel
Android 4.2.x
Download Milestone XXG09 - Latest
Download Milestone XXF08
Android 4.3
Download 4.3 XXG09J - Latest
Download 4.3 XXE07J
Sources: https://github.com/Jeeko/Golden_Kernel_4.3
Nice. I'll try it out.
Giving this a spin. Plays nice with root on 4.3. Good Start!
toro, toro!
Trying this out on 4.2, thanks.
WHATCHOO TALKING BOUT WILLIS?
Just found this beast.. Flashing now!! Thanks
Sent from my Galaxy Nexus using Tapatalk 4
This... This kernel right here makes the Galaxy Nexus perform the way it should be. GoldenX governor just makes this phone run sooo responsive and sooo fluid.
Just Pure...
Ok guys... new Golden Kernel means new Golden I/O Scheduler (I'm planning the wiki) now your phone should run like butter /Wipe chache e Data, always!!
Enjoy
Ermaferkonguard!!!!! Butter got nothing on this. Its like......Heavens butter...PERFECTION. omg
Sent from my Galaxy Nexus using xda premium
This kernel is great ty been running it for a day or so so smooth
Sent from my Galaxy Nexus using xda premium
I f'ing love this kernel!!! Running golden setting on both the governor and I/O scheduler. Coupled with 4.3, my gnex has never been so smooth, wow!
toro, toro!
What setting for better battery life
This kernel has been giving me better battery life than lean. Keep up the good work. I was running default and then changed to powersave for even more savings
Sent from my Galaxy Nexus using Tapatalk 4
What's a good setting for balance?
Sent from my Galaxy Nexus using Tapatalk 4
Just flashed this and so far its amazing!!! It deleted tapatalk and Pandora for some reason but I just reinstalled as it was no big deal just kinda weird. As of now it looks like I'll be using this for a while I'll report back in the next day or two and say how everything worked out. Thanks for making and posting this wonderful kernel!!! ^_^
Sent from my Galaxy Nexus using Tapatalk 2
OP reports that this is built with GCC 4.7. But TricksterMod is reporting 4.6.2, which has a date of 2011. Is that just a name thing? Or is 4.7 the same as 4.6.2? And why use a version from 2011?
Sounds like a good deal. I'll be flashing it tonight
Thank you for your feedback, I apreciate
christianpeso said:
OP reports that this is built with GCC 4.7. But TricksterMod is reporting 4.6.2, which has a date of 2011. Is that just a name thing? Or is 4.7 the same as 4.6.2? And why use a version from 2011?
Click to expand...
Click to collapse
I use only the arm-eabi folder of GCC 4.7, the other folders come from toolchain 4.6.2 here's the why
Does dropping the voltages down .50 actually help? I saw someone say that before but on a different kernel
Sent from my Galaxy Nexus using Tapatalk 2
I'm not one that typically sees much of a difference in kernels... This one is top notch. Major smoothville here! Great job!
Sent from my Galaxy Nexus using Tapatalk 2
Anyone get pgm working on this?
toro, toro!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
Linux Kernel Version Updated to 3.4.110
CPU Overclock: (Temp removed due to issues)
Added overclock to 2.8 GHz
Frequency range: 300, 422, 652, 729, 883, 960, 1036, 1190, 1267, 1497, 1574, 1728, 1958, 2265, 2457, 2572, 2726, 2803 MHz
Powersuspend
Added ability to set governor and min/max frequency for each CPU core specifically
Added option to set max frequency in suspend state and manage some other parameters of that state
CPU Boost Driver
Added boost driver, which can be used as input boost (boost frequency on touch), hotplug boost (boost frequency when cores go online) and wakeup boost (boost frequency when we wake up the phone), plus, we can set boost frequency for each core specifically
CPU Governors
ondemand
performance
powersave
userspace
interactive
conservative
ondemandplus
optimax
pegasusq
nightmare
impulse
yankactive
smartmax
elementalx
CPU Voltage Control
Added ability to change CPU voltage for each frequency specifically
CPU Hotplug Drivers
IntelliPlug
MSM Hotplug
MSM MPDecision Hotplug
Alucard Hotplug
GPU Overclock: (Temp removed due to issues)
Overclocked GPU to 650 MHz
Frequency range: 100, 200, 330, 389, 462, 5, 650 MHz
GPU Governors
msm-adreno-tz
cpufreq
userspace
powersave
performance
simple_ondemand
cache_hwmon
Adreno Idler
Added this idling algorithm, an efficient workaround for msm-adreno-tz's overheads
KCAL Control
Added ability to change a lot of display parameters relating to colors. Adapted from savoca
FrancoSound
A sound manager in kernel by fransiscofranco
USB Fast Charge
Disables MTP while connected to PC, so we can charge phone faster
Fastcharge
Backported from Xiaomi ability to fastcharge
I/O Schedulers
bfq
noop
deadline
test-iosched
row
cfq
fiops
sioplus
zen
vr
Thermals:
Simple thermal by sultanxda
Vibration Intensity:
Vibration Intensity control
TCP:
westwood
cubic
reno
bic
Wake Controls:
Doubletap2wake based on powersuspend by showp1984
The kernel has 4 versions:
a. Stock i.e It doesnt include DT2W and OC
b. DT2W i.e It includes DT2W but no OC
c. OC i.e It includes OC but no DT2W - Removed
d. DT2W-OC i.e Obviously both - Removed
How to install:
1. Download the kernel
2. Boot into recovery
3. Flash the kernel(No need to wipe anything)
4. Reboot
XDA:DevDB Information
MOSHI, Kernel for the Xiaomi Mi 3
Contributors
@ssasin.monish
Source Code: https://github.com/monishk10/android_kernel_xiaomi_cancro
Kernel Special Features:
Version Information
Status: Beta
Created 2015-12-25
Last Updated 2015-12-26
Download Link:
Download
The link contains 3 folders:
LP-KK, MM, MM-wifi
Which one to download from?
LP-KK - All LP, KK based ROMS use this.
MM - Ivan's AOSP 6.x, OmniROM 6.x, CAF ROM
MM-wifi - Rest all MM based ROMS download this.
Note: If the wifi breaks on MM then download the other version i.e if it breaks on MM dowload from MM-wifi and vice versa.
Recommended Setting:
Govs:
Either interactive or elementalx
Hotplug:
Alucard
TCP:
Westwood
I/O Scheduler:
fiops
GPU:
msm-adreno-tz
Voltage Table:
Stock
For KCAL:
Use app by savoca
http://downloads.codefi.re/savoca/kcal
Choose the best saturation and value according to u.
Future updates:
Franco sound to faux sound
tuning the governors
Optimising oc builds.
Mi4 Support?
Prince Chandela said:
Mi4 Support?
Click to expand...
Click to collapse
Yes
Mm-wifi for Official CM 13 ??
Sent from my MI 3W using Tapatalk
SenseiK said:
Mm-wifi for Official CM 13 ??
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
Yes
@ssasin.monish said:
Yes
Click to expand...
Click to collapse
Thanku
Sent from my MI 3W using Tapatalk
And the best thing is you gave option to choose to include DTW or not (don't like that battery drain). Gonna install right away on CM13
Edit: Wi-Fi works as it should. Good stuff that it has inbuilt various hotplugs. The ROM feels more smooth as a matter of fact, it's flying :v
Also it *seems* to solve the sometimes slow charging issue (edit : charging still slow)
Great job, 1st kernel which works with Wi-Fi on newer MM ROMs and don't have to look to other kernels due to extra features I don't like. (Using the Stock version simply)
Me_Ashish_ said:
And the best thing is you gave option to choose to include DTW or not (don't like that battery drain). Gonna install right away on CM13
Click to expand...
Click to collapse
Please revert soon with a Review!
I cannot lose WiFi connectivity so..
Sent from my MI 3W using Tapatalk
SenseiK said:
Please revert soon with a Review!
I cannot lose WiFi connectivity so..
Sent from my MI 3W using Tapatalk
Click to expand...
Click to collapse
It ll work definitely. Tested
Anyone tried on Ivan's Aosp, is it working well?
finally I am able to use DT2W on my Mi4...
Working perfectly. DT2W working smoothly.
Using DT2W OC on Mi4
On Official CM 13.0
Thanks to Dev :good:
Tried on CAF 6.0 working fine
I've kept max freq 2.8Ghz on elemental gov.
Sent from my MI 3W using Tapatalk
atomix18 said:
Anyone tried on Ivan's Aosp, is it working well?
Click to expand...
Click to collapse
Yup.. Working perfectly..
Flashed DTW OC version on latest Ivan's MM rom
Edit :Battery draining very fast and little bit heat even when my phone is locked.. When I lock the phone.. there is red light blinking on proximity sensor continously.. Setting of the kernel is at default.
I will try stock now ?
Edit 2: Same problem with Moshi stock.. ?
Working fine on Audahadi's cm13. DT2W one.
Lost only 4% of battery during 10 hours of deep sleep.
I love this kernel...the best!
I have never seen such a rich feature kernel ever thank you for your hard work. Will test it and will write again.....
MIUI8 kernel for Mi5Disclaimer: I am NOT resposible for any damage to your device
This kernel is for MIUI8 Android 7.0, which is Xiaomis Android Nougat BETA
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Kernel does not come with F2FS for MIUI, there are too many issues with F2FS enabled
Features:
Compiled with Linaro toolchain v6.2.1
Compiler optimizations flags
Fingerprint wakeup
Fingerprint home
Fsync toggle
TCP Algorithms - westwood, cubic, reno, highspeed, dctcp, htcp, hybla, illinois, veno
CPU Governors - zzmoove, yankactive, smartmax_eps, smartmax, smartassv2, pegasusq, ondemand_x, ondemandplus, nightmare, ironactive, intellimm, intelliactive, intellidemand, HYPER, electrodemand, darkness, cafactive, blue_active, barry_allen, alucard, elementalx, lionheart, bioshock
Backlight Dimmer (enabled by default)
I/O Schedulers - FIOPS (default), BFQ, SIO, ZEN
CIFS
NTFS/RW
F2FS support (OTG)
Vibration control
Secureboot supported
Init.d supported
Modules signed SHA512
Modules compressed
Privileged Access Never (security)
ZRAM & ZRAM compression (Must enable using script or terminal)
Secure Touch
Working:
Mobile Network
Torch
Camera
Touchscreen
Buttons
Audio
Brightness
LED
Wifi
Video playback
Much more
Issues:
Please report here with logcat and kernel logs if any issues arise
Credits:
@bgcngm
@h2o64
Note for DEVS:
This Kernel is a base for all developers to use to create custom kernels for Mi5 MIUI Android 7
Download:
V0.9 - https://drive.google.com/open?id=0B_dL6rx9wnDUTWJUQXJjSUZ6VU0
V1.1 - REMOVED
V1.5 - REMOVED
V1.6 - https://drive.google.com/open?id=0B_dL6rx9wnDURl9LR1k1S0xnd2M
V1.8 - https://drive.google.com/file/d/0B_dL6rx9wnDUeDVQMU9NTFUtUFk/view
V2.0 - https://drive.google.com/open?id=0B_dL6rx9wnDUUy1LbGNpZHR0YWM
Source Code: https://github.com/Shaky156/Mi5-MIUI8-Nougat-Kernel
Changelog
v0.9:
Initial release for MIUI 8
[*]v1.0:
REMOVED (MIUI Unstable/Incompatible with F2FS)
[*]v1.5:
F2FS remains for USB OTG
Fingerprint wakeup
Fingerprint home
Fsync support
TCP Algorithms - westwood, cubic, reno, highspeed, dctcp, htcp, hybla, illinois, veno
CPU Governors - zzmoove, yankactive, smartmax_eps, smartmax, smartassv2, pegasusq, ondemand_x, ondemandplus, nightmare, ironactive, intellimm, intelliactive, intellidemand, HYPER, electrodemand, darkness, cafactive, blue_active, barry_allen, alucard, elementalx, lionheart, bioshock.
32/64/128GB GPU OC @ 652mhz + GPU UV
64/128GB CPU Little @ 1.8Ghz, CPU BIG @ 2.35Ghz + CPU UV
32GB, CPU Little @ 1.6Ghz, CPU BIG @ 2.1Ghz + CPU UV
Backlight Dimmer
Kcal Control
I/O Schedulers - FIOPS (default), BFQ, SIO, ZEN
NTFS/RW
+Other Optimizations
[*]v2.0:
Control over CPU Boost (cores, frequency, ms)
Removed KCAL
Init.d
Fingerprint wakeup enable/disable scripts included
Secureboot support
Compiled using latest Linaro GCC 6.2.1 toolchain
Compiler flag optimizations
Alot more...
[/B]
Kernel compiling for MIUI
Create a new folder named MIUIKernel
Open terminal and locate MIUIKernel folder
In terminal type in (git clone https://github.com/Shaky156/Mi5-MIUI8-Nougat-Kernel.git)
Kernel config for MIUI is gemini-miui8-nougat_defconfig, so type in terminal (make gemini-miui8-nougat_defconfig && make -j4(number of processing cores))
Download script dtb&sign.sh and put it in the kernel directory
run dtb&sign.sh, this will output the kernel and signed modules to a folder (Output)
NIce one, gonna wait the stable one
Alright
---------- Post added at 12:07 PM ---------- Previous post was at 12:07 PM ----------
Shaky what are the features of this kernel
grandakadp said:
NIce one, gonna wait the stable one
Click to expand...
Click to collapse
I have just installed it and Wifi does work
EDIT and so does video playback work
gowtham300 said:
Alright
---------- Post added at 12:07 PM ---------- Previous post was at 12:07 PM ----------
Shaky what are the features of this kernel
Click to expand...
Click to collapse
Will add soon
shaky expect a lot of traffic on this thread soon but on which miui version does this work on 6.0 or 7
gowtham300 said:
shaky expect a lot of traffic on this thread soon but on which miui version does this work on 6.0 or 7
Click to expand...
Click to collapse
It is MIUI8 Android 7.0 which is MIUI latest beta from xiaomi.eu v7.1.5
Alright I'll flash
Finaly.... Thank u brotha
The wait is over
Just flash it for me booted fine without any problerms after flash lost root acsess,re root it and all good now,only capacitive buton not working all else is fine.
pletpetplet said:
Just flash it for me booted fine without any problerms after flash lost root acsess,re root it and all good now,only capacitive buton not working all else is fine.
Click to expand...
Click to collapse
As in lighting up or dont provide a function?
Shaky156 said:
As in lighting up or dont provide a function?
Click to expand...
Click to collapse
Nope no light at all dont have any function,if i press it then work fine.
pletpetplet said:
Nope no light at all dont have any function,if i press it then work fine.
Click to expand...
Click to collapse
Weird, its working fine over here, will take a look into this
shaky will this kernel in the future sometime be able to bring 32gb upto speed because it was possible in previous cm 13 version and i don't have the capacitive button issue
Touch to home doesn't work
---------- Post added at 05:12 PM ---------- Previous post was at 04:52 PM ----------
Charging over heats the device
gowtham300 said:
shaky will this kernel in the future sometime be able to bring 32gb upto speed because it was possible in previous cm 13 version and i don't have the capacitive button issue
Click to expand...
Click to collapse
Touch to home is a minor think, just echo 1 to the enable wake file under fingerprint directory, thats all is required to enable touch to home and fingerprint wake up
In android 7 recent release xiaomi have enabled quick charge 3, by allowing charging upto 3A, its now also included in lineageos, so the device is expected to get a little warm with that amount of current pushing to our battery, atleast we have our devices charge quicker
Thanks!
Shaky156 said:
Touch to home is a minor think, just echo 1 to the enable wake file under fingerprint directory, thats all is required to enable touch to home and fingerprint wake up
In android 7 recent release xiaomi have enabled quick charge 3, by allowing charging upto 3A, its now also included in lineageos, so the device is expected to get a little warm with that amount of current pushing to our battery, atleast we have our devices charge quicker
Click to expand...
Click to collapse
I noticed that but I used only a qc 2 charger it went to 45 degrees
---------- Post added at 04:21 AM ---------- Previous post was at 04:14 AM ----------
Another issue id like to note is that idle battery drain is high around 7℅ over night there's no rogue apps the device is clean