Bootloop after lg bridge - G4 Q&A, Help & Troubleshooting

After modifying build files failed, G4 bootlooped at starting logo.
Tried to repair it with lg bridge, and it was forced to update to 6.0 v20c.
Flashed it with v10fkdz(5.1), and the error message was shown:"Error Code=0x2000, Can't decide current device mode."
Can anybody help me to solve the problem?

I think you broke your download mode; sadly, it is the only mode that you can flash via LG Bridge and LG UP. If you have an unlocked bootloader, you can flash an image through fastboot. As for me, I can't flash on either of those programs since I also broke my download mode and I have a locked bootloader. Otherwise stated, I have a hard bricked device. Waiting for some possible new program to fix my device

I tried on 3 different PCs, and another available G4 device.
The problem is still there.
I don't know why,
but after reinstall LGUP, downgrade of my phone is OK.
Thx guys

Related

[Q] Help needed with my LG v410

Good day fellow XDA users!
I've been playing with my Lg v410 and as you could have guessed - bricked it (while trying to install a rom
The problem: The phone is not booting further the LG logo and the android install
I've tried:
1. Doing a hard-reset, didn't work. After getting to the hard-reset screen - I double-confirm the reset and then nothing happens (waited for about an hour and a half).
2. Entering download-mode, didn't work. It shows the "download mode" logo but nothing happens.
3. Connecting to PC, fast-boot, adb of LG Tool can't "see" the device.
Any suggestions?
Thanks in advance
There is no .kdz released for the V410 (thanks AT&T) so download mode is kind of useless. People have tried the LG mobile support tool with the tablet in download mode, some report it is detected. However, the support tool just says you have the most recent firmware and won't restore the tablet; it is worth a try but unlikely to help.
The only way I've heard of anyone recovering from breaking the V410 to the point where all you have working is download mode is by sending the tablet to LG and having them reflash it.
You can't blame LG for this, they've released firmware for the V400 and by all accounts support it fairly well. It is some kind of AT&T thing; same with some other AT&T branded devices I have. They won't let OEMs release the firmware for devices they peddle.
Your best bet to support this tablet yourself is to nuke the laf partition and enable fastboot (since download mode is useless). At least that way you have a shot at flashing a new recovery or other stuff if something goes wrong.
Good luck. Sorry I don't have any better ideas. At one point I researched a method to create a .kdz from images of a working tablet to deliver with the LG tools, but if it is possible at all, it is beyond my developer skills.
Om it's way to LG for a reflash.

LG G3 D855 Stuck in MiniOS boot animation after trying to flash stock firmware w/ kdz

Hello. My LG G3 D855 originally ran CyanogenMod13 Nightly, and for some reason 6.0 Marshmallow GApps did not work. So I attempted to flash back to stock using LG Flash Tool. However after the flashing (successful), my phone would only boot into Download Mode, even after hard factory reset. Nothing worked, ADB, fastboot, nothing. So I then downloaded the older version of Flash Tool (2014), and the G3 D855 6.0 marshmallow KDZ. I believe this was successful, as now the phone changed from download mode to the MiniOS boot animation. However that is all it did, just displayed the animation. I attempted a hard factory reset (and the design of the screen had changed, which is why I assumed the KDZ flashing worked). That didn't help, and so I booted back into Download Mode, and tried flashing the TOT file for my device using the newer Flash Tool. However the new Flash Tool didn't even recognize my device, and so I, in one last hopeful effort, downloaded LG PC Suite to try and fix my phone, but in Download Mode or otherwise, my phone wasn't detected. I've tried flashing other versions of the KDZ on my phone, all unsuccessful. And of course there is no recovery I can access. Please any help would be extremely appreciated.

Lg G4 H815 hard-bricked with different qualcomm soft?

Hello, (complete n00b here)
Several days ago I've tried to flash a 6.0 MM (from 5.1) to my LG G4 H815 phone. There was no option to do it automatically so I proceded to do it manually via flashboot.
I hard-bricked it to oblivion as in black screen, no response whatsoever.
While investigating @ the internet I've managed to understand I could get it fixed via quadcomm drivers (mode 9008).
Tried various "fixes" for H815 but was getting safari download errors. For some reason I tried a LS991 fix and it worked. When I started the phone it showed no logo but just a secure booting error 1006.
Still, could enter firmware download so I began to flash a lot of KDZ firmwares with no success.
LGUP shows my model : H81510H.
While in fastboot mode there is a note below (wasn't there the first time) with codes : 633 B46 or something like that.
While flashing anything it ALWAYS STOPS at 9% with a tot anti-rollback error. While flashing the code changes briefly where one can read smth like : LGLS991ZVA ver. 6.0
Managed to download some KDZ for that exact model, SAME ERROR. Tried to find / flash LS991ZVA with no success in finding a TOT file.
Also, managed to get ADB drivers up and it shows unauthorized in listing (LS991). Fastboot does not detect my device even in fastboot mode @ phone.
Please HELP!
Longbranch said:
Hello, (complete n00b here)
Several days ago I've tried to flash a 6.0 MM (from 5.1) to my LG G4 H815 phone. There was no option to do it automatically so I proceded to do it manually via flashboot.
I hard-bricked it to oblivion as in black screen, no response whatsoever.
While investigating @ the internet I've managed to understand I could get it fixed via quadcomm drivers (mode 9008).
Tried various "fixes" for H815 but was getting safari download errors. For some reason I tried a LS991 fix and it worked. When I started the phone it showed no logo but just a secure booting error 1006.
Still, could enter firmware download so I began to flash a lot of KDZ firmwares with no success.
LGUP shows my model : H81510H.
While in fastboot mode there is a note below (wasn't there the first time) with codes : 633 B46 or something like that.
While flashing anything it ALWAYS STOPS at 9% with a tot anti-rollback error. While flashing the code changes briefly where one can read smth like : LGLS991ZVA ver. 6.0
Managed to download some KDZ for that exact model, SAME ERROR. Tried to find / flash LS991ZVA with no success in finding a TOT file.
Also, managed to get ADB drivers up and it shows unauthorized in listing (LS991). Fastboot does not detect my device even in fastboot mode @ phone.
Please HELP!
Click to expand...
Click to collapse
H81510h is os version it is still at 5.1 I think....what may help is plug your phone in with lgup and drop the battery out of it then closes of LG up put battery back in and start LG up and find kdz that matchs your phone and make sure that it doesn't have anti rollback.....
stinka318 said:
H81510h is os version it is still at 5.1 I think....what may help is plug your phone in with lgup and drop the battery out of it then closes of LG up put battery back in and start LG up and find kdz that matchs your phone and make sure that it doesn't have anti rollback.....
Click to expand...
Click to collapse
Hello and thx for reply. I tried to do what u've said. It did something (I was looking for a while back). When I plug the cable back in, my windows 7 immediately installs quadcomm hs-usb driver (9008) and my phone acts as if it was dead. LGUP cannot find it in that state. I've been trying to QFIL the "proper" soft but it continues to pop different errors (using different QFIL versions). Either saharafail or some sort of download fail.
LGUP still presents an error (if I decide to "fastboot" it) @ 9% 0x2000, TOT antirollback version is smaller than device version.
How can I make sure I've got the proper KDZ without ANTI-ROLLBACK?
Longbranch said:
Hello and thx for reply. I tried to do what u've said. It did something (I was looking for a while back). When I plug the cable back in, my windows 7 immediately installs quadcomm hs-usb driver (9008) and my phone acts as if it was dead. LGUP cannot find it in that state. I've been trying to QFIL the "proper" soft but it continues to pop different errors (using different QFIL versions). Either saharafail or some sort of download fail.
LGUP still presents an error (if I decide to "fastboot" it) @ 9% 0x2000, TOT antirollback version is smaller than device version.
How can I make sure I've got the proper KDZ without ANTI-ROLLBACK?
Click to expand...
Click to collapse
This may help........
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
stinka318 said:
This may help........
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Click to expand...
Click to collapse
Thx again. Uppercut shows H81510H as LGUP did. Is it possible that it's somehow write-protected?
It confuses me, since during the firmware update on my phone, I get this small box below the picture showing wierd codes : 633A Bxx and when I'm trying to flash my phone, the code gets longer with LS991ZVA v6.0 and more other. It then stops.
Funny thing is, when I got the phone I couldn't even connect to the LG bridge to update it at all. I've managed to do it bugging the MTP protocol but THAT on the other hand prevented me from copying stuff / FLASH my phone to MM 6.0. Had to factory reset it back then and all went back to "normal" = LG couldnt detect my device but I could copy photos or stuff from it.
NOW, when my phone is bricked, LGbridge DETECTS my phone (in fastboot), downloads the newest KDZ update BUT cannot install it (same thing as in LGUP). Hence my question : is it somehow write-protected?
Longbranch said:
Thx again. Uppercut shows H81510H as LGUP did. Is it possible that it's somehow write-protected?
It confuses me, since during the firmware update on my phone, I get this small box below the picture showing wierd codes : 633A Bxx and when I'm trying to flash my phone, the code gets longer with LS991ZVA v6.0 and more other. It then stops.
Funny thing is, when I got the phone I couldn't even connect to the LG bridge to update it at all. I've managed to do it bugging the MTP protocol but THAT on the other hand prevented me from copying stuff / FLASH my phone to MM 6.0. Had to factory reset it back then and all went back to "normal" = LG couldnt detect my device but I could copy photos or stuff from it.
NOW, when my phone is bricked, LGbridge DETECTS my phone (in fastboot), downloads the newest KDZ update BUT cannot install it (same thing as in LGUP). Hence my question : is it somehow write-protected?
Click to expand...
Click to collapse
Have you tried to eset it by pushing power and volume own then when you see bootsplash then release power button and hen quickly push the power button again....
But in your case push power and volume down within the count or 20 then release power then push power button again and see what happens and then try the same thing on volume up......
Thanks for the reply.
I did what u've said. Despite no logo I tried to release power button for a second just after the screen's brightness goes up (I also get a small vibration @ start). Everytime I get secure booting error 1006 after a few seconds.
On the other hand when I did that with volume UP button there was no error but there was nothing aswell until I release power button in which case I got the secure booting error. All of the above tries were done with no USB connection with anything.
Longbranch said:
Thanks for the reply.
I did what u've said. Despite no logo I tried to release power button for a second just after the screen's brightness goes up (I also get a small vibration @ start). Everytime I get secure booting error 1006 after a few seconds.
On the other hand when I did that with volume UP button there was no error but there was nothing aswell until I release power button in which case I got the secure booting error. All of the above tries were done with no USB connection with anything.
Click to expand...
Click to collapse
Do try with usb s well it may do something r do nothing......
Can't tell atm since I gave it to professionals. I'll wait and see how it'll turn up. Thx for all the effort tho, was nice to tinker with a lil help
@Longbranch did you solve this problem ? I'm in the same state but my phone model is H810, everything else is the same as yours.
Nope, not really. I gave it back to the reseller and my money got returned luckily.
The professionals I refer to above did install a specific firmware for the ls991 type. Firmware ZVB I think. The only one appliable apparently. Anyways, as I suspected the ls991 type is for the US and therefore it didn't work in my country in EU. My sim card wouldnt work with it. Besides, without the sim card, the phone decided to freeze and die after several minutes every time I turn it on. Swapped for LG G5 and it's working flawlessly up until this day.
good for you, what i don't understand is that it's a h810 model but now identify as ls991 does that mean you can convert it just by a Qfil flash? I may try another model flash if can't find a suitable Rom for it
Longbranch said:
Nope, not really. I gave it back to the reseller and my money got returned luckily.
The professionals I refer to above did install a specific firmware for the ls991 type. Firmware ZVB I think. The only one appliable apparently. Anyways, as I suspected the ls991 type is for the US and therefore it didn't work in my country in EU. My sim card wouldnt work with it. Besides, without the sim card, the phone decided to freeze and die after several minutes every time I turn it on. Swapped for LG G5 and it's working flawlessly up until this day.
Click to expand...
Click to collapse
Chebhou said:
good for you, what i don't understand is that it's a h810 model but now identify as ls991 does that mean you can convert it just by a Qfil flash? I may try another model flash if can't find a suitable Rom for it
Click to expand...
Click to collapse
Yes! That's what I and neutrondev telling everyone :
do not use qfil without the knowledge about the result!
The only working firehose file available out there is for the ls991 and that means if you use it it will turn your device into a ls991 without any way to get back to your previous device model!!
.
Sent from my LG-H815 using XDA Labs
@steadfasterX since I have done it already is there any way to get it working even as an LS991 ?
here is what i did till now
the reason for using Qfill is that it went dead after flashing an H810 rom .
after that when it's in download mode it doesn't allow me to flash the ls911ZV5 ls911ZV6 ls911ZV6_12 roms that i found ( it says LS991ZVA )
so i went in fastboot and flashed boot/aboot/recovery....img extracted from the ls911ZV6 rom then it accepted the rom in download mode
but it is stuck in a hard bootloop ( reboots when it is getting in recovery but still has download mode yet no fastboot as before)
any thoughts ?
Chebhou said:
@steadfasterX since I have done it already is there any way to get it working even as an LS991 ?
here is what i did till now
the reason for using Qfill is that it went dead after flashing an H810 rom .
after that when it's in download mode it doesn't allow me to flash the ls911ZV5 ls911ZV6 ls911ZV6_12 roms that i found ( it says LS991ZVA )
so i went in fastboot and flashed boot/aboot/recovery....img extracted from the ls911ZV6 rom then it accepted the rom in download mode
but it is stuck in a hard bootloop ( reboots when it is getting in recovery but still has download mode yet no fastboot as before)
any thoughts ?
Click to expand...
Click to collapse
Yes it's possible. You can boot a h811 H815 or any other rom you like. Even LOS!!
Great right? BUT you are bounded to the ls991 modem and so you need to be in a sprint network to use telephony. That means the phone is now useless outside the US .
And you wrote you tried ls911 ROMs? I hope you meant ls991
I work on a fully working experience on every network though. Checkout my proof of concept for unlocking the bootloader thread
I can go into details on IRC if you like.
..
Sent from my LG-H815 using XDA Labs
@steadfasterX thank you for keeping up with me ! ( btw what room on IRC ?)
for now I have used Qfill again and got fastboot working again and flashed TWRP ( not sure where ! ) so when the phone is off and i plug the usb it boots to twrp ( but it doesn't in recovery )
normal boot will show "secure boot error 1002"
then i flashed twrp img to recovery partition using twrp but it didn't work in recovery ( still reboots after showing Recovery Mode loading screen )
also tried to load some roms on the device to try them but I got error "file too large for filesystem " when copying them .
atm I don't know the state I'm in and what should be next ?
btw here are the recovery log and dmesg
Chebhou said:
@steadfasterX thank you for keeping up with me ! ( btw what room on IRC ?)
for now I have used Qfill again and got fastboot working again and flashed TWRP ( not sure where ! ) so when the phone is off and i plug the usb it boots to twrp ( but it doesn't in recovery )
normal boot will show "secure boot error 1002"
then i flashed twrp img to recovery partition using twrp but it didn't work in recovery ( still reboots after showing Recovery Mode loading screen )
also tried to load some roms on the device to try them but I got error "file too large for filesystem " when copying them .
atm I don't know the state I'm in and what should be next ?
btw here are the recovery log and dmesg
Click to expand...
Click to collapse
Np we can bring you back to life but as already said without cell service. That's the price for the firehose and unlocked feeling you have now.
Did you found and read my thread here?
https://forum.xda-developers.com/g4/general/bl-unlock-unlock-bootloader-proof-t3648288
There you will find some more info and also the IRC details how you can find me. I'm online from Monday to Friday mainly.
It's much easier to talk in chat then here. once all the details are known I will provide a full guide.
.
Sent from my LG-H815 using XDA Labs

LG Bridge for software reinstall

Hi all,
I was wondering, once I have custom firmware and recovery on my lg g4, will I be able to reinstall the software from LG Bridge. I understand that I could use the kdz downloaded by it in LG UP, but I was wondering, if I put my phone in download mode, could the update error recovery utility in LG Bridge also reinstall it?
Thanks in advance for your help
ThePiGuy said:
Hi all,
I was wondering, once I have custom firmware and recovery on my lg g4, will I be able to reinstall the software from LG Bridge. I understand that I could use the kdz downloaded by it in LG UP, but I was wondering, if I put my phone in download mode, could the update error recovery utility in LG Bridge also reinstall it?
Thanks in advance for your help
Click to expand...
Click to collapse
I tried this recently just to see what it does, but it even didn't recognize the phone. So you probably need to use LGUP (which I used to go back to stock on my G4) or TWRP to flash something else.
SuperBommel said:
I tried this recently just to see what it does, but it even didn't recognize the phone. So you probably need to use LGUP (which I used to go back to stock on my G4) or TWRP to flash something else.
Click to expand...
Click to collapse
I just tried it and interestingly if the phone is in download mode, it does get recognized as an LG device and will initiate an Update Error Recovery

AS986 Bootloop and Hardbrick

So, I have the LG G4 AS986 which I presume is very similar to the Verizon VS986 but I decided to post here because they aren't exactly the same model. The phone has been working for years but recently got the dreaded bootlooping issue. I decided to follow a few guides to try and fix it by using LG KDZ Tool and LG UP and bricked it. I was able to unbrick the device by flashing some G4 Sprint files using the Qualcomm tool (qfil?). After unbricking the phone, I put the phone into download mode and flashed the phone using LG UP with a KDZ from the Verizon variant. LG UP said it was successful, however, whenever I try to boot the phone, a message pops up with "Secure booting error: 1006" or something similar to that and stays there until the battery is pulled. Somehow, I was able to flash TWRP on the device by nuking the laf partition but even flashing a custom rom on the device using TWRP, it still encounters the secure booting error issue and won't boot. Any help will be greatly appreciated! Thanks!

Categories

Resources