Related
I just got my Sprint GN a few weeks ago, and love using the bluetooth to connect to my car audio, but every 3rd or 4th time I get into my car I notice the bluetooth doesn't pair, so I take out my phone and look and the bluetooth icon is gray (instead of blue, indicating it has connected), I toggle the bluetooth off, and then when I try to turn the bluetooth radio back on it just sits there saying "bluetooth is turning on...". Bluetooth stops working until I reboot my phone
Does anyone have any incites into this or anyone else experiencing this?
I have the same issue. It's no solution but you can enable/disable Flightmode to get Bluetooth up and running again (but quicker then reboot).
Sent from my Galaxy Nexus using Tapatalk 2
I'll give that a try (again) next time.. I am 100% certain I had tried that, though, unfortunately.
Yeah, I tried your solution again, and it just keeps saying "bluetooth is turning on..." even after I've turned *on* airplane mode.
Need some more information to be able to help you properly >_>
Stock ROM or Custom?
Rooted/Unrooted?
Or alternatively (Because it sounds like you're running a stock Galaxy Nexus...) ave you tried unpairing, and the repairing the devices?
Hi Zach,
Completely stock & unrooted (so far)
I actually did a complete factory reset a couple days ago, and the problem has yet to resurface, so I'm crossing my fingers and hoping it's gone, but the issue was intermittent so there is no way to be completely sure it won't show up again.
If it does, I'll try your suggestion, thanks
Ok, I installed the new Joying 10.1" VW head unit in my car the other day, and it's working pretty good, however I'm having a couple of issues. I installed Malaysk's ROM onto it and still working through setting everything up the way I want it, but I'm having 2 issues I can't figure out, and they are driving me nuts.
Wifi: Whenever the unit reboots, the WiFi is disabled. I have to manually re-enable it every time.
12-Hour Time: Every time the unit reboots, the time reverts back to 24-hour time.
Anyone know what I can do to fix these issues? Getting rather annoying having to switch them every time the unit boots up.
Thanks
bwhite757 said:
Anyone know what I can do to fix these issues? Getting rather annoying having to switch them every time the unit boots up.
Thanks
Click to expand...
Click to collapse
Sounds like the 12+ and ACC connections are swapped.
Thanks for the reply, but the unit is switched on Via Can-Bus. There is no ACC wire. It powers on and off just fine when I start and shut off the car.
bwhite757 said:
Thanks for the reply, but the unit is switched on Via Can-Bus. There is no ACC wire. It powers on and off just fine when I start and shut off the car.
Click to expand...
Click to collapse
Then your 12+ is not constant.
Yep it is, verified with a volt meter, 12volt constant stays hot, even went out and checked after my car had been off for over an hour just to make sure... I shouldn't have said there is no ACC wire, ACC is supplied by the Can-Bus adapter.
As far as the wiring goes, I'm confident all of that is wired correctly. I used to install car stereos as a job for 5 years, and this is the 3rd head unit in this vehicle. I'm an Android enthusiast, and definitely know my way around the system, even though this is my 1st Android head unit I've dealt with.
The 12-Hour time issue was happening before I installed the ROM on it, but the WiFi issue didn't start until after I installed the ROM.
Ok, thats a puzzler then. My observations have been that wi-fi will turn off and 24 hour set every time power is lost on the 12+ line. It seems independent of rom used, would happen on the stock rom and on a older version of Malaysk's I'm currently using.
Well, for whatever reason today the settings never reverted back. I don't remember changing anything, but I did go through every single menu and sub menu in the settings section. Oh well, fingers crossed everything stays set, because this head unit is perfect for me now!
I have the same issue + no bluetooth. I have a YINUO 1024x600 Quad-Core RK3188 and it's doing the WIFI OFF, 24 HR, NO BT.
Hi,
I installed this HU in my car a month ago and I still have not gotten it to work properly. My main problem is that the unit reboots randomly and does not turn on again.
I have tested the reset button and checked all the wiring. I have connected the 12V direct battery and the adapter for the steering wheel gives me the 12V ACC.
It seems that the radio goes into some form of protection until it suddenly decides to restart.
I really do not know what else to check. If I modify some parameter in the factory settings, it asks to restart, it only shuts down but does not turn on.
Yesterday afternoon it worked correctly but this morning it has not started.
any ideas?
These are my specs:
Car: Alfa Romeo 159 (2012 year)
HU: Xtrons TE706PL
MCU: MTCE_GS_V2.88_3
steering controls: Connects2 CTSAR002.2 + CTMULTILEAD.2 Patch Lead
I'm experiencing the same issues with my PX5 / CSN2 headunit from Klyde. Sometimes the HU won't come out of standby, the screen remaining black and buttons not reacting at all (but with LED backlight). If I had FM radio before turning off, it will start playing audio only in the background. Turning off the car engine triggers a restart, as if it entered some unrecoverable state.
runy said:
Hi,
I installed this HU in my car a month ago and I still have not gotten it to work properly. My main problem is that the unit reboots randomly and does not turn on again.
I have tested the reset button and checked all the wiring. I have connected the 12V direct battery and the adapter for the steering wheel gives me the 12V ACC.
It seems that the radio goes into some form of protection until it suddenly decides to restart.
I really do not know what else to check. If I modify some parameter in the factory settings, it asks to restart, it only shuts down but does not turn on.
Yesterday afternoon it worked correctly but this morning it has not started.
any ideas?
These are my specs:
Car: Alfa Romeo 159 (2012 year)
HU: Xtrons TE706PL
MCU: MTCE_GS_V2.88_3
steering controls: Connects2 CTSAR002.2 + CTMULTILEAD.2 Patch Lead
Click to expand...
Click to collapse
First...update the rom and mcu to the latest available
Try
Second...disconnect the connects2 and use the unit without that canbus to ensure there is incompatibility issues. Try
Enviado desde mi SM-G950F mediante Tapatalk
coronero said:
I'm experiencing the same issues with my PX5 / CSN2 headunit from Klyde. Sometimes the HU won't come out of standby, the screen remaining black and buttons not reacting at all (but with LED backlight). If I had FM radio before turning off, it will start playing audio only in the background. Turning off the car engine triggers a restart, as if it entered some unrecoverable state.
Click to expand...
Click to collapse
Well, in my case the unit doens't start, nothing, no led, no sound... I think the problem is that the unit is not able to make a cold start after going into deep sleep
ikerg said:
First...update the rom and mcu to the latest available
Try
Second...disconnect the connects2 and use the unit without that canbus to ensure there is incompatibility issues. Try
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
I can't update the frimware if the device doesn't start...
I'll try, but it is not easy because my car doesn't have 12V ACC so I need the connects interface to get the power.
runy said:
Well, in my case the unit doens't start, nothing, no led, no sound... I think the problem is that the unit is not able to make a cold start after going into deep sleep
I can't update the frimware if the device doesn't start...
I'll try, but it is not easy because my car doesn't have 12V ACC so I need the connects interface to get the power.
Click to expand...
Click to collapse
To test, I would do this.. Connect the acc direct to battery.... The deck should turn on.. Reboot the deck while it's on. If it boots back up... Then the above poster is probably correct. Your module is not working correctly and not giving a proper acc signal.
The unit was connected with ACC wire connected to the Connects2 adapter. But yesterday I connected the unit directly to the car only the wires; ground, 12V battery and 12V ACC. The device started and worked fine. Turn off the car and five hours later the device didn't started. Today 20 hours later the device doesn't start either I tried to disconnected everything and connect again but the problem continue.
I think the problem is, the device is not able to do a cold boot after to turn off the radio. How to do a factory default reset? maybe this fix the problem.
I connected the device to direct battery and the first time worked but now it isn't able to start....
Hi guys, I am having a problem with my tv.
I have a generic keyboard with a 2.4ghz USB receiver.
While the TV was with the version that came from the factory, the keyboard worked well and could be turned off when not in use, this action did not affect the TV.
Yesterday, we updated to the latest version of the system since the TV suggested it. The update went well and everything worked correctly.
When turning off the keyboard to save energy, now the TV turns off too and there is no way to turn it back on, you have to take the original control and turn it on again ...
Does anyone have any idea what the problem may be and how to fix it?
I went to the store where I bought the keyboard, they changed it for a new one and the same thing keeps happening.
Thank you all!
Wireless keyboard- android tcl
I have the same issue. Any fix?
---------- Post added at 02:11 PM ---------- Previous post was at 02:09 PM ----------
checho.djc said:
Hi guys, I am having a problem with my tv.
I have a generic keyboard with a 2.4ghz USB receiver.
While the TV was with the version that came from the factory, the keyboard worked well and could be turned off when not in use, this action did not affect the TV.
Yesterday, we updated to the latest version of the system since the TV suggested it. The update went well and everything worked correctly.
When turning off the keyboard to save energy, now the TV turns off too and there is no way to turn it back on, you have to take the original control and turn it on again ...
Does anyone have any idea what the problem may be and how to fix it?
I went to the store where I bought the keyboard, they changed it for a new one and the same thing keeps happening.
Thank you all!
Click to expand...
Click to collapse
I have the same issue. Any fix?
Hello guys,
I have 2 TCL TVs which have the same issue.
I bought 2 USB wireless keyboard/touchpad to use one for each.
They both go on standby when the keyboard is turned off manually or automatical standby.
I have found an option which fixed it (somehow) for me:
"Settings > Device Preferences > Inputs" & disable the following: "Device auto power off (Power off HDMI devices with the TV)"
After I toggled the switch in the settings, the TV will not turn off when I manually switch the keyboard off!! (if it takes me near to 2' and I turn it off, the TV goes off as well)
On the other hand, the TCL Android TV will still go on standby but only when the wireless keyboard goes on automatic standby after about 3 minutes..
S.Constantinou said:
Hello guys,
I have 2 TCL TVs which have the same issue.
I bought 2 USB wireless keyboard/touchpad to use one for each.
They both go on standby when the keyboard is turned off manually or automatical standby.
I have found an option which fixed it (somehow) for me:
"Settings > Device Preferences > Inputs" & disable the following: "Device auto power off (Power off HDMI devices with the TV)"
After I toggled the switch in the settings, the TV will not turn off when I manually switch the keyboard off!! (if it takes me near to 2' and I turn it off, the TV goes off as well)
On the other hand, the TCL Android TV will still go on standby but only when the wireless keyboard goes on automatic standby after about 3 minutes..
Click to expand...
Click to collapse
Update:
When the TV is on for a while and I still manually turn on & off the wireless keyboard, the TV still goes on standby..
Hii, Ali Sami Farooq here, i also update the android of my tv few days ago , i also used wireless keyboard bbut in my case both working properly you have to check the setting function of tv .
checho.djc said:
Hi guys, I am having a problem with my tv.
I have a generic keyboard with a 2.4ghz USB receiver.
While the TV was with the version that came from the factory, the keyboard worked well and could be turned off when not in use, this action did not affect the TV.
Yesterday, we updated to the latest version of the system since the TV suggested it. The update went well and everything worked correctly.
When turning off the keyboard to save energy, now the TV turns off too and there is no way to turn it back on, you have to take the original control and turn it on again ...
Does anyone have any idea what the problem may be and how to fix it?
I went to the store where I bought the keyboard, they changed it for a new one and the same thing keeps happening.
Thank you all!
Click to expand...
Click to collapse
Hi! I found a solution you have to keep press volume + or - in your remote control at the same time you turn off the keyboard. That way your TV doesn't turn off too. Then, you can turn on the keyboard and use it again. It's a little tedious but it's something :/. (Sorry for my English, I'm from Costa Rica and I speak spanish).
FranCR27 said:
Hi! I found a solution you have to keep press volume + or - in your remote control at the same time you turn off the keyboard. That way your TV doesn't turn off too. Then, you can turn on the keyboard and use it again. It's a little tedious but it's something :/. (Sorry for my English, I'm from Costa Rica and I speak spanish).
Click to expand...
Click to collapse
It works, thanks
ziggurat90 said:
Doesn't work, TV still turn off while I do that
Click to expand...
Click to collapse
You have to keep the remote control off until you use it again. Any time you need to use the remote control, you have to turn it off with this method again.
Got my Fold 3 a few days ago. Got is setup and plugged it into my truc,k and my Android Auto unit reads "No Device'". My Note 10 works fine but not my new phone. My headunit is a Jensen (like I said, worked fined with my Note 10). The Fold3 works find in my Nissan (Pioneer head unit) and my Edge (factory Ford Sync).
Illusive Man said:
Got my Fold 3 a few days ago. Got is setup and plugged it into my truc,k and my Android Auto unit reads "No Device'". My Note 10 works fine but not my new phone. My headunit is a Jensen (like I said, worked fined with my Note 10). The Fold3 works find in my Nissan (Pioneer head unit) and my Edge (factory Ford Sync).
Click to expand...
Click to collapse
I am no expert here, but when I had a similar issue. I believe it is because I transferred everything from my prior phone to the new one. I got the same error when trying to pair my phone with wireless Android Auto in my Kia K5. My solution was to goto Google Play Services and clear the cache there. For some reason that allowed my phone to be found by my reciever. and worked. I didn't experince this with my new ZF3 but I did when I got my Note 20 Ultra last year. So try clearing the cache in Google Play Services.
Hey so try clearing the cache in the Google Play Services app. This worked for me when I had a similar issue with my Kia K5 going from Note 9 to Note 20 Ultra. I got the same error no device. This was going to a wireless head unit for AA. I finally figureout how to clear the cache in the Google Play Services app. Then went back to connect and it worked. Try this. It may work for the ZF3. Thankfully I did not have the same issue going from the Note 20 Ultra to ZF3. But this is what I would have done.
Thanks, man. I did that and to no avail. My phone is still not being recognized by my truck. When I press "Android Auto" on my head unit, I still get the message "No Device"
I'd flip cables for sure. Then I'd go to your setting when plugged in and make sure it's not set to charge only on the phone. Should be adjustable from the notification on charging.
I've having some weird issues with android auto and my fold 3. I've noticed when connected to android auto I often loose cellular data and it switches from 5g/lte/edge and no service. If I disable android auto the phone operates normally. Anyone else seeing anything similar.
Just a thought for OP. Did you happen to try opening Android Auto app in phone and checking to see if truck is an added vehicle and add if not?
The cable seems the most viable option. There is no option to select or deselect charging only, and Android Auto is no longer separate app. It is built into the OS and automatically opens when the phone is plugged into a headunit and there are no options to manipulate. The pain is that the dash has be pulled out to change the cable so I'll have to research a certified cable.
Did you buy chance to to settings > advance settings > then use Android auto there? Not sure if a setting in that will help. When I open it it wantsto attempt to connect to vehicle
Zugshad said:
Did you buy chance to to settings > advance settings > then use Android auto there? Not sure if a setting in that will help. When I open it it wantsto attempt to connect to vehicle
Click to expand...
Click to collapse
When I go there, I get the button to connect to a car, but when I plug the cable in, nothing happens and the head unti still displays no device. I'm thinking that I'm going to have to remove the dash and change the cable.
Illusive Man said:
When I go there, I get the button to connect to a car, but when I plug the cable in, nothing happens and the head unti still displays no device. I'm thinking that I'm going to have to remove the dash and change the cable.
Click to expand...
Click to collapse
Ah well unfortunately don't no more than that, just knew I saw an android auto option in there. My car doesn't support wireless and haven't tried the wired part yet to see
Well, removed the dash and head unit and changed the cable. I tried a Belkin USB-C certifed cable and even the known working cable from my other truck, and got the same thing.
On the phone I get the notification to stop my truck and apply the parking brake to continue and on the head unit I still get the notice of "no device" when I press the screen for Android Auto. At this point, I'm hoping I don't have to change my head unit to get this setup to work.
Weird mine worked just fine.
Did you make sure everything was updated
Yeah. I called Jensen they say it's a phone problem, Samsung says it's a Jensen problem
Got an email from Jensen customer service. My HU uses a bypass to allow certain functions while my truck is moving. I installed the HU myself and also installed the bypass. Jensen engineers found that I need to disconnect the parking brake wire from the bypass and connect it to chassis ground. I did that and was able to connect. I'm so happy to be able to use my phone in my truck.