I have a question the last few devices I have had could play music via Bluetooth to my cars without the notification sound coming though the car speakers. Now with this new phone AT&T Note 5, I can seem to not have the notification sounds come though the car speakers.
My Nexus 6 (Moto) plays the music and volume lowers a bit but my notification sound is not audible via car speakers like the Note.
Is there a setting I can change that I cant find?
Related
How do I upgrade my 8125 so that I can use my windows media player to play my songs over my motorola S9 stereo bluetooth headphones. I already have the upgraded ROM. I only hear my phone calls in my right ear...mono!
i think this is a problem with bluetooth.
you can use a headphone as stereo headphone or
as a headset
Headphone=stereo
headset =mono
because the specrum of bluetooth is to small for 3 cannels (the microphone is a channel, too)
Umm, yeah
Last I checked, Motorola S9 headsets only give audio for phone calls through one earphone, so it's not a problem with your bluetooth. I think it mentions it in the manual. That's just the way motorola designed the headset. So you'll get music though both ears, and phone calls through one ear. Trust me though, I tried another headset that gave phone calls and music through both ears, and hearing my mom's voice on blast in both of my ears wasn't cool....
Not sure where or what to search for on this issue but it's been killing me with my Nexus for the past few months.
Coming from a couple of HTC phones one thing I really liked about them, which might have been Sense feature, was the phone having two completely separate audio volumes one for when headphones were plugged in and another for when the phone was hooked up via Bluetooth.
My problem is I listen to music very low with headphones at work, then unplug them before getting into my truck, automatically hooking up to the Bluetooth to stream and the volume stays at the low headphone volume. To hear it over truck stereo I need to turn the phone BT volume all the way up. Fast forward to when I sit back down at work to listen to music, my headphone volume is back to the last BT volume or maxed out. Just a real annoyance and find it hard to believe this is the way Google designed it and has nothing in place when I'm having an off day and don't manually fix it before I listen to my headphones again and blast my eardrums like I did yesterday.
Is this how the Nexus should handle BT and Headphone volumes? Is there any kind of fix for this?
Thanks in advance
When I use the Bluetooth in my car, audio plays fine through the car speakers.
However, when there is a notification, the sounds plays through the car speaks and the phone as well.
Is there any way to have all the sound come via the car speakers only?
I have the same problem. Nobody have the solution ?
Hello Everyone,
We here at iBOLT would love to find out what percentage of Samsung Galaxy S4 users are listening to streaming music from their handset while in the car. As your S4 has access to great music Apps like Pandora, Spotify, TuneIn, Slacker etc. it would be great to find out what percentage are driving a car equipped with car-stereo that features Bluetooth Audio Streaming (so called "A2DP" profile). If not, what kind of speaker do you have set up?
Don't have a car, but when I ride my motorbike I use the S4A to listen to music through my bluetooth headset in my helmet.
And if I were to buy a car, the ability to pair it with my phone (also for a2dp) is definitely important.
I stream both Internet content and content stored on my device. The content isn't what's important. What's important is the ability to stream the content through bluetooth to the radio.
my car has a Galaxy Tab 2 7" in my dash board so most of my music is played right off the 16GB MicroSD Card in the tablet, but when I do want to stream from my Subsonic server at home I do it through my phone. I do have a BT Headset (Samsung HS3000) which supports A2DP wired into my car speakers, but from my phone the volume is super low for some reason, so I usually just plug my phone into the 3.5mm headset plug I have also hooked up in my car.
I just use simple wired headphones because my bluetooth set fell off my head and shattered to tiny bits on the floor it's funny cause it still works but there's no way to get it back together again. I only use play music at the moment. I'd rather not stream because it bites into my data plan with sharp pointy teeth. That crap leaves marks!
Well I use my Plantronics Bluetooth headsets while I am in the car or on my bike...the music quality is superb and it just makes me to enjoy the track with driving though and its quite easy to answer the calls even so I just love my headsets they are pretty awesome one to use.....
I like listen to streaming music while driving, cause it can make me sober when drive.:laugh:
mainly using deezer for streaming with 3,5mm jack !
I do.
Connecting phone (headphone connector) to car audio system by cable.
Mainly using xiialive
d8389 said:
I do.
Connecting phone (headphone connector) to car audio system by cable.
Mainly using xiialive
Click to expand...
Click to collapse
you are using the all new bluetooth cable, right? [emoji16]
i do, with alpine UTE-72BT
d0n s4sh said:
you are using the all new bluetooth cable, right? [emoji16]
i do, with alpine UTE-72BT
Click to expand...
Click to collapse
3.5 connector. Not bluetooth.
Diablo2424 said:
my car has a Galaxy Tab 2 7" in my dash board so most of my music is played right off the 16GB MicroSD Card in the tablet, but when I do want to stream from my Subsonic server at home I do it through my phone. I do have a BT Headset (Samsung HS3000) which supports A2DP wired into my car speakers, but from my phone the volume is super low for some reason, so I usually just plug my phone into the 3.5mm headset plug I have also hooked up in my car.
Click to expand...
Click to collapse
Is your car stereo a kenwood? I used to be an installer and a lot of kenwood bluetooth models have a default setting to play bluetooth audio through only one speaker. This had me stumped for a while, but what you need to do to change it is to put it in the "standby" source, and then access "detailed settings" and look for a setting I believe is labeled bluetooth HF audio or something, enter that setting and you can change it from "front/front only" to "all". It took a while for me to finally find it because you need to be on the standby source and access the settings. You'd think to be able to change it while in the bluetooth source. Hope that solves your issue.
Wondering if there's a secret. It's like everything below 200mhz has been removed, both through headphone jack and bluetooth.
Sound quality for me both on Bluetooth and headphones is great
Sounds good to me
Same here. Good quality in car whether i use my bt adapter or through audio jack.
Using Vanilla Player to play local mp3s sounds good on my headphones. Maybe a little "small" on my BT speaker, but its a small cheap speaker. Haven't noticed poor quality in my car.
I do use bluetooth pretty much exclusively in the car. I have a pair of headphones that sound really good with the phone. Dont use anything else to play music but I do sometimes have problems with the headphone jack when I move the cable around.
The sound quality when connected via cable to my car stereo or headphones seems to be fairly decent, though a bit noisier than the audio I get from my iPhone. I still have the problem of losing audio on calls after disconnecting from the audio jack (I can't hear callers on incoming calls and sometimes callers cannot hear me when I call them) and then having audio not re-routed back to the audio jack the next time I connect. Because this has happened on more than one Fire phone, I just use a cheap Bluetooth USB adapter connected to my stereo which does degrade the audio quality somewhat however.
Do you guys use any sound processing apps at all? I seriously have no bass coming out of my phone. I turn the bass up almost all the way on my car stereo, and in an EQ app for the phone (tried without the app too), and it's still not quite what a normal mp3 playing directly on my car receiver sounds like.
I'm on fire OS, are any of you on cm11?
Also this uses dolby or something doesn't it? I worry that something I've disabled has messed it up, but don't know what it would be.
adam.nox said:
Do you guys use any sound processing apps at all? I seriously have no bass coming out of my phone. I turn the bass up almost all the way on my car stereo, and in an EQ app for the phone (tried without the app too), and it's still not quite what a normal mp3 playing directly on my car receiver sounds like.
I'm on fire OS, are any of you on cm11?
Also this uses dolby or something doesn't it? I worry that something I've disabled has messed it up, but don't know what it would be.
Click to expand...
Click to collapse
No sound processing apps for me. I'm usually on Fire OS 4.6.3 rooted with no Google Play services. Now I'm on 4.6.5 unrooted (trying to resolve a GPS issue) and it sounds the same over BT.
Works fine for me too. Hardwired through AUX or with Bluetooth. Headphones/earbuds sound good too. I mainly use Amazon Music player, Google Music, and Pandora.
I've had no problems with BT connection from my Fire OS Fire Phone to my Sony receiver. Bass response is good whether or not I am running "Equalizer FX." I use Equalizer FX because the bass on the car stereo (and my headphones) rolls off below 60Hz.
I have learned from other phones that running the volume at max level can cause clipping and sound degredation.