Develop Bugs

DEVS: Attention: Changes to KFire-Android projects

WARNING: I'm changing / restructuring the projects on KFire-Android so that all of the Kindle Fire devices can be supported (in the future).
This involves standardization and renaming of the projects across the board.
The new local_manifest.xml is updated here:
https://github.com/KFire-Android/android_local_manifest
Please give me a few days to iron out the otter build again to make sure everything is running correctly before posting that it isn't working
Right now the local_manifest looks something like this:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<!-- local projects -->
<project path="kernel/amazon/otter-common" name="KFire-Android/kernel_omap_otter-common" revision="cm-10.1" />
<project path="kernel/amazon/bowser-common" name="KFire-Android/kernel_omap_bowser-common" revision="cm-10.1" />
<project path="device/amazon/omap4-common" name="KFire-Android/android_device_amazon_omap4-common" revision="cm-10.1-dev" />
<project path="device/amazon/otter" name="KFire-Android/android_device_amazon_otter" revision="cm-10.1" />
<project path="device/amazon/otter2" name="KFire-Android/android_device_amazon_otter2" revision="cm-10.1" />
<project path="device/amazon/tate" name="KFire-Android/android_device_amazon_tate" revision="cm-10.1" />
<project path="device/amazon/jem" name="KFire-Android/android_device_amazon_jem" revision="cm-10.1" />
</manifest>
As you can see there are new devices for: 2nd Gen KFire, HD 7 and HD8 all setup to use a common projects folder so that we don't duplicate across all of the projects.
Once again: there is some downtime while I sort out the otter/jem builds and then we can look at bringing up support for otter2 and tate (HD 7).

If repo sync failed for omap4-common, try setting revision to cm-10.1-dev

Updated

[Q] How To Fix Boot Stuck After Compilation?

Hello mates
I build successfully Cyanogen Mod 10.1 for my ancora device as test, i got many warning during compilation without any stop, if got warning during compilation did mean can't boot or what depend from?
i use this repos as source:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="arco" fetch="https://github.com/arco" />
<remote name="ralisi" fetch="ssh://[email protected]/ralisi" />
<project path="device/samsung/ancora" name="android_device_samsung_ancora" remote="ralisi" revision="cm-10.1"/>
<project path="vendor/samsung/ancora" name="android_vendor_samsung_ancora" remote="arco" revision="cm-10.1"/>
<project path="kernel/samsung/samsung-kernel-msm7x30" name="samsung-kernel-msm7x30" remote="arco" revision="cm-10.1"/>
</manifest>
Click to expand...
Click to collapse
Any one can help me, thanks

[ROM][6.0.1][K920][kingdom_row]AICP for Lenovo Vibe Z2 Pro ROW

Unofficial build of AICP for international Lenovo Vibe Z2 Pro
DOWNLOAD
Google+ community
known bugs:
- FM radio not working
- restart doesn't work
- echo - try to install latest stock ROM then install CM-13.0 to fix
...
kernel source: https://github.com/frantisheq/android_kernel_lenovo_msm8974
local_manifest.xml
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="frantisheq/android_device_lenovo_kingdom_row" path="device/lenovo/kingdom_row" remote="github" revision="aicp-mm6.0" />
<project name="frantisheq/android_kernel_lenovo_msm8974" path="kernel/lenovo/msm8974" remote="github" revision="cm-13.0" />
<project name="frantisheq/proprietary_vendor_lenovo" path="vendor/lenovo" remote="github" revision="cm-13.0" />
</manifest>
Click to expand...
Click to collapse

I can't download. Receiving error OOPS!
no mirrors found.

fixed download https://www.androidfilehost.com/?fid=24438995911973743

new build, updated DOWNLOAD link in first post

Thank u bro

1-)When we are talking on the phone, it's makes an echo so you hear your, voice again.I don't hear any echo own echnly you hear.
2-)This problem occurs in all softwares except euphoria.What is wrong with other softwares .What can I do for that problem.To solve this problem in my mobile phone,could you give me any different modem software?

new build https://basketbuild.com/filedl/devs...p_kingdom_row_mm-11.0-UNOFFICIAL-20160330.zip

new build based on 7.1.1 ready to go http://frantisheq.synology.me/android/kingdom/aicp

Mod Edit
Thread closed at the request of the [OP]
malybru
Senior Moderator

Tab Pro 8.4 [T325] CM-13.0 from source -- unknown baseband, no IMEI

Hello I kinda hope I'm posting this in the right place. 'cause I kinda need some advice as to why I'm unable to build my mondrianlte with a working radio stack.
So breaking this down I'm on Mint Linux 17.3 (Rosa), I have all the ensured that I have my build environment set up etc.. build-essential, openjdk7 etc...
I've followed the CyanogenMod mondrianwifi wiki for the most part.
I think I had managed to crack the local_manifests (tabpro.xml) with some trial and, error.
Code:
<?xml version="1.0" encoding="utf-8"?>
<manifest>
<remote name="git" fetch="https://github.com/" />
<project path="hardware/samsung" name="CyanogenMod/android_hardware_samsung" repo="github" revision="cm-13.0" />
<project path="kernel/samsung/mondrianwifi" name="CyanogenMod/android_kernel_samsung_mondrianwifi" remote="github" revision="cm-13.0" />
<project path="vendor/samsung" name="crpalmer/proprietary_vendor_samsung" remote="git" revision="cm-13.0" />
<project path="device/samsung/mondrianlte" name="crpalmer/android_device_samsung_mondrianlte" remote="git" revision="cm-13.0" />
<project path="device/samsung/tabpro-common" name="crpalmer/android_device_samsung_tabpro-common" remote="git" revision="cm-13.0" />
<project path="device/samsung/msm8974-common" name="CyanogenMod/android_device_samsung_msm8974-common" remote="github" revision="cm-13.0" />
<project path="device/samsung/qcom-common" name="CyanogenMod/android_device_samsung_qcom-common" remote="github" revision="cm-13.0" />
<project path="device/qcom/common" name="CyanogenMod/android_device_qcom_common" remote="github" revision="cm-13.0" />
<project path="external/sony/boringssl-compat" name="CyanogenMod/android_external_sony_boringssl-compat" repo="github" revision="cm-13.0" />
</manifest>
One repo sync and, about 90 Minutes later...
$cd ../device/samsung/mondrianlte
$./extract-files.sh
Which when using a prior version of CM-13.0 manages to finish without any visible errors extracted Files could be found either in ../vendor/samsung/tabpro-common, or ../vendor/samsung/mondrianlte.
After that I run:
$source build/envsetup.sh
$breakfast mondrianlte
brunch mondrianlte.
The build (for me...), takes about ~5H 20m to complete, again with out any errors.
I can even boot it just fine, but alas with out any Cellular Voice & Data.
I've already tryed to swap out the Kernel, with what I would have assumes was a working version.
I've tried to reflash both the modem.bin & non-hlos.bin
I've even tried use EFS Backup & Partition Backup (to hopefully push what was a working /efs partition to my new build.
My Tab Pro 8.4 however wasn't having any of that.
Could it be that I have to somehow also mod the mondrianwifi kernel to become fully compatible with my lte version, or is it something else that I'm missing.

Ok having took a clue from another picassolte user, I tried rebuilding CM-12.1 from source again. The last time I had tried it I wasn't able to get off the bootloader screen (Where it says Samsung Tab|Pro T325...)
So that was about +7h of my life wasted back then. I guess I could chalk it down to not having a proper local_manifests *xml set up.
So in my epic adventure to try and get myself up to the May Security Updates LMY49J I decided that I had to give it another try.
This was the local_manifests *.xml that I finally used to install CM-12.1 on my T325
Code:
<?xml version "1.0" encoding="utf-8"?>
<manifest>
<remote name="git" fetch="https://github.com/" />
<project path="hardware/samsung" name="CyanogenMod/android_hardware_samsung" repo="github" />
<project path="kernel/samsung/mondrianwifi" name="CyanogenMod/android_kernel_samsung_mondrianwifi" remote="github" />
<project path="vendor/samsung" name="crpalmer/proprietary_vendor_samsung" remote="git"
<project path="device/samsung/mondrianlte" name="crpalmer/android_device_samsung_mondriante" remote="git" />
<project path="device/samsung/tabpro-common" name="crpalmer/android_device_samsung_tabpro-common" remote="git" />
<project path=device/samsung/msm8974-comon" name="CyanogenMod/android_device_samsung_msm8974-common" remote="github" />
<project path="device/samsung/qcom-common" name="CyanogenMod/android_device_samsung_qcom-common" remote="github" />
<project path="device/qcom/common" name="CyanogenMod/android_device_qcom_common" remote="github" />
</manifest>
Again unlike CM-13.0 it took about +2h's longer to compile then CM-13.0 (5h 20m) to CM-12.1's (7h 30m).
But, unlike CM-13.0 I now have a fully working CM-12.1 build with fully working voice and Data.
Could this be because I was just trying to pull the cm-13.0 trees, instead of the master branches (like above?)
I think I might retry using the same manifest once more to build CM-13, just to be sure. But, I'm starting to think something might have gone a bit pare shaped and that's why we haven't been getting any new-ish nightlies from crpalmer. In which case I'd be just as lost... If not more so. Though I do hope to be able to dig down a bit deeper one of these days.

Device tree for AOSP?

Hello,
I'm trying to compile android-6.0.1_r74 for my HTC One M8, but the device tree from CyanogenMod doesn't even get recognized by the AOSP build environment.
I only get:
Code:
[email protected]:~/android-6.0.1_r74$ . build/envsetup.sh
including device/asus/deb/vendorsetup.sh
including device/asus/flo/vendorsetup.sh
including device/asus/fugu/vendorsetup.sh
including device/generic/mini-emulator-arm64/vendorsetup.sh
including device/generic/mini-emulator-armv7-a-neon/vendorsetup.sh
including device/generic/mini-emulator-mips/vendorsetup.sh
including device/generic/mini-emulator-x86_64/vendorsetup.sh
including device/generic/mini-emulator-x86/vendorsetup.sh
including device/htc/flounder/vendorsetup.sh
including device/huawei/angler/vendorsetup.sh
including device/lge/bullhead/vendorsetup.sh
including device/lge/hammerhead/vendorsetup.sh
including device/moto/shamu/vendorsetup.sh
including vendor/cm/vendorsetup.sh
including sdk/bash_completion/adb.bash
[email protected]:~/android-6.0.1_r74$ choosecombo
Build type choices are:
1. release
2. debug
Which would you like? [1] 1
Which product would you like? [full] cm_m8
build/core/product_config.mk:222: *** Can not locate config makefile for product "cm_m8". Stop.
** Not a valid product: cm_m8
Which product would you like? [full] m8
build/core/product_config.mk:222: *** Can not locate config makefile for product "m8". Stop.
** Not a valid product: m8
Which product would you like? [full] cm
build/core/product_config.mk:222: *** Can not locate config makefile for product "cm". Stop.
** Not a valid product: cm
Which product would you like? [full] ^C
[email protected]:~/android-6.0.1_r74$
Does anybody
know of a device tree for the M8 that works with AOSP?
have an idea what has to be done to get the CM-device tree to work with AOSP?
know where I could find resources/documentation that could help solve this problem?
know of a person or chat group/irc/etc. that doesn't just ignore you completely?
Here is my manifest file. I already tried different configurations, but none of them worked:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<remote name="github" fetch="https://github.com/" />
<project name="SlimRoms/device_htc_m8" path="device/htc/m8" remote="github" revision="mm6.0" />
<project name="SlimRoms/device_htc_m8-common" path="device/htc/m8-common" remote="github" revision="mm6.0" />
<project name="CyanogenMod/android_device_htc_msm8974-common" path="device/htc/msm8974-common" remote="github" revision="cm-13.0" />
<project name="SlimRoms/kernel_htc_msm8974" path="kernel/htc/msm8974" remote="github" revision="mm6.0" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_hardware_qcom_fm" path="hardware/qcom/fm" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_hardware_sony_thermanager" path="hardware/sony/thermanager" remote="github" revision="cm-13.0" />
<project name="TheMuppets/proprietary_vendor_htc" path="vendor/htc" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_vendor_cm" path="vendor/cm" remote="github" revision="cm-13.0" />
</manifest>
<!-- somewehre from github
<manifest>
<remote name="github" fetch="https://github.com/" />
<project name="CyanogenMod/android_device_htc_m8" path="device/htc/m8" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_device_htc_m8-common" path="device/htc/m8-common" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_device_htc_msm8974-common" path="device/htc/msm8974-common" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_kernel_htc_msm8974" path="kernel/htc/msm8974" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_hardware_qcom_fm" path="hardware/qcom/fm" remote="github" revision="cm-13.0" />
</manifest>-->
<!-- original
<manifest>
<remote name="github" fetch="https://github.com/" />
<project name="CyanogenMod/android_device_htc_m8" path="device/htc/m8" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_device_htc_m8-common" path="device/htc/m8-common" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_device_htc_msm8974-common" path="device/htc/msm8974-common" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_kernel_htc_msm8974" path="kernel/htc/msm8974" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_hardware_sony_thermanager" path="hardware/sony/thermanager" remote="github" revision="cm-13.0" />
<project name="TheMuppets/proprietary_vendor_htc" path="vendor/htc" remote="github" revision="cm-13.0" />
<project name="CyanogenMod/android_vendor_cm" path="vendor/cm" remote="github" revision="cm-13.0" />
</manifest>-->