In this Thread i will explain how to set up MTK drivers and Flashtools.
Guideline:
Post #1 : Set up MTK drivers in Windows 8 / 8.1 / 10
Post #2 : Use Flashtools for MTK Devices
Post #3 : How to Flash Custom Roms / Roms download Guide / How to Root Stock Rom
Post #4 : Windows 10 MTK Drivers installation ( just in case post #1 dont work )
Post #5 : Lost IMEI Backup
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
How to Install MTK drivers in Windows 8 / 8.1 / 10
what we need:
MTK Vcom Preloader Driver 2.0
Download : https://www.androidfilehost.com/?fid=24438995911977169
First thing we need is to Disable the Signed Driver verification on Windows :
To disable driver signature verification, we’re going to need to get into the Troubleshooting options from the boot manager.
The easiest way to bring this screen up is using this secret trick.
Hold down the SHIFT key while you click Restart.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once your computer has rebooted you will be able to choose the Troubleshoot option.
Then head into Advanced options.
Then Startup Settings.
Since we are modifying boot time configuration settings, you will need to restart your Computer one last time.
After restarting your computer a second time,
choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard.
That’s all there is to it. Your PC will then reboot and you will be able to install unsigned drivers.
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Now its Time to open SP_Driver_v2.0.zip and start the DriverInstall.exe
it will open the install prompt . Press okay and dont change the installation path
Code:
C: // program files / Mediatek / Driver Package
during the installation it will start the verification window security.
Click on Install this driver software anyway
There will be an Error Message . - We Ignore it !
-Now Open your Device Manager and leave it open.
-Power Off your Phone and connect it with your Pc.
-you will see Under ports ( COM & LPT ) a Preloader unknown device
right click on there and click on Driver update/installation.
-Choose manually search for drivers
-Browse to C:// program files / Mediatek / Driver Package and apply.
-If all went good you have successfully installed the MTK Vcom Drivers. :good:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
How to Use Flashtools
i use SP_Flash_Tool_Windows_v5.1520.00.000 and never had a problem with it.
Its for most all MTK Phones and for all Elephone Devices
Download Link: https://www.androidfilehost.com/?fid=24438995911977217
- Extract the Flashtool zip folder to your Desktop
- Click flash_tool.exe to open the Tool
- You will see two "folder buttons" Download agent and Scatter-loading
- Into Download agent place the MTK_AllInOne_DA.bin file .
its in your Flashtools folder
- Into Scatter-loading place the Scatter.txt
All Stock Roms / Custom Recoverys have one Scatter.txt in their Zip files.
- Make sure that every partition is checked
-IMPORTANT NOW, Flashing Part-
-Power Off your Device!
-Press on the Download Button!
-Connect your Device with PC and wait until all is flashed
-you will see a Green Mark when all is done
-Disconnect your Device and press Power button to Reboot.
:fingers-crossed::good::fingers-crossed:
------------------------------------------------------------------------------------------------------------------------------------------------
How to Install Custom Roms
You don't need to root your phone to use Custom Roms like
Eragon Rom
or
Nexus Rom
because within installation it will get root with SuperSU
P.s: if you run into a problem e.g Bootloop . (newest Rom dont work well with our Custom Roms , related to its Partition.Img)
You could Flash the Stock ROM 02150725 to solve it
--------------------------------------------------------------------------------------------------
1. Place the Rom.Zip into your Internal or External Sdcard
2. If you are on Stock Rom just Flash a Custom Recovery
Best Recovery without any bug is Philz v2 but you can also use Twrp Recovery
3. Hold Vol+ and Power simultaneously
you will get into the Bootloader Menu
4. Navigate with Vol+ to Recovery and apply with Vol-
5. In Recovery perform a Fullwipe , wipe System , Data , Cache , Dalvik
(In Philz Recovery wipe "clean to install a new rom"
In TWRP Recovery Wipe /advanced Wipe /wipe System,Data,Cache,dalvik)
6. Install the Rom.Zip located in your Sdcard
7. Reboot
<><><><><><><><><><><><><><><><><><><><><><><><><> <><><><><><><><><><><><><><><><><><><><><><><><>
Custom Roms and Stock Roms
Eragon Rom - http://forum.xda-developers.com/elephone-p8000/development/rom-06-9-eragon-1-0-android-5-1-t3195007
Nexus Rom - http://forum.xda-developers.com/elephone-p8000/development/rom-nexus-t3235626
CyanogenMod 12.1 - http://forum.xda-developers.com/elephone-p8000/orig-development/rom-cyanogenmod-12-1-p8000-t3259022
Flyme - http://bbs.elephone.hk/thread-8682-1-1.html#.VuQ3WYQrHIU flash via Flashtools
Vibe - http://bbs.elephone.hk/thread-8192-1-1.html Flash via Flashtools
Emui - http://forum.xda-developers.com/ele...-emui-v3-1-lite-04-02-2016-android-5-t3309296
Stock Roms
2015.07.25 - http://bbs.elephone.hk/thread-6536-1-4.html#.VuQ3C4QrHIU
2015.08.15 - http://bbs.elephone.hk/thread-7096-1-4.html#.VuQ3DoQrHIU
2015.09.07 - http://bbs.elephone.hk/thread-7743-1-2.html#.VuQ3QYQrHIU
2015.10.14 - http://bbs.elephone.hk/thread-8751-1-2.html#.VuQ3K4QrHIU
2015.11.05 - http://bbs.elephone.hk/thread-9163-1-2.html#.VuQ3NYQrHIU
2015.12.03 - http://bbs.elephone.hk/thread-9415-1-1.html#.VuQ3UYQrHIU
2016.02.17 - http://bbs.elephone.hk/thread-9898-1-1.html#.VuQ3SYQrHIU
Custom Recoverys
Philz v2: https://www.androidfilehost.com/?fid=24052804347838441
Twrp 2.8.7.0 : https://www.androidfilehost.com/?fid=24269982086997788 thx hanuma
Twrp 3.0.0.0 : https://mega.nz/#!wZM01byD!JTkRCVaJoxm5YmE2sFQBB2e1wnDIYo1AWAetqY8e60o thx hanuma
SuperSU root
Thread:
http://forum.xda-developers.com/showthread.php?t=1538053
100% bug free Supersu v.2.46.zip
https://download.chainfire.eu/696/SuperSU/
<><><><><><><><><><><><><><><><><><><><><><><><><> <><><><><><><><><><><><><><><><><><><><><><><><>
How to Root Stock Rom
-If you want to Root your prefered Stock Rom
-Place SuperSU into your Sdcard
-Flash a Custom Recovery with Flashtools and its Scatter.txt
-Hold Vol+ and Power to get into Bootloader Menu
-Navigate with Vol+ and apply Recovery with Vol-
-Flash Supersu.zip
-Reboot
Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driver install tutorial
To determine the version of Windows 10 that you have (32 bit or 64 bit):
- Right-click on Start then click on System
- In the System window that opens, in System section, you will find your version of Windows next to System type
To disable Windows 10 64 bit driver signature enforcement:
- On your 64 bit Windows 10 desktop click on Start then on Settings
- Click on Update & security then in the left pane click on Recovery
- Under Advanced startup click on Restart now button
- Click on Troubleshoot then on Advanced options
- Click on Startup Settings then on Restart button
- The computer will restart with the Startup Settings screen
- To disable the driver signature enforcement until next restart press on number key 7 or F7 on your keyboard.
- After restart you can proceed with the unsigned MTK drivers installation for your 64 bit Windows
- After you install the unsigned drivers, to use them again in the future, you have to repeat this procedure
To install the MTK VCOM USB Drivers on 32 & 64 bit Windows 10:
- Download the drivers *.zip archive and extract the folder from inside on to the desktop:
https://www.androidfilehost.com/?fid=24269982087012126
Right-click on Start then click on Device Manager
In the Device Manager Window click on the first item – your computer name
Click on Action then Add legacy hardware
On the Welcome to the Add hardware Wizard window click on Next button
Select Install the hardware that I manually select from a list (Advanced) and then click on Next button
Click on Show All Devices then on Next button
In the Add Hardware window click on Have Disk… button
In the Install From Disk windows click on Browse… button
In the next window – Locate file – browse for the folder that you have extracted on the desktop at the beginning
Select the version of the driver according to your Windows 10 version – x64 for 64 bit and x86 for 32 bit and click Open button
Click the OK button to load the driver
From the list of drivers select MTK USB Port and click on Next button
If a red warning window will open, click on Install this driver software anyway
This action will add the following drivers in to the operating system:
- MediaTek DA USB VCOM Port
- MediaTek PreLoader USB VCOM Port – for transferring the firmware to your device
- MTK USB DEBUG Port
- MTK USB Modem Port
- MTK USB port – for transfering PreLoader to your device (and recovery in case of bad or corrupt firmware)
Now we need to remove the device that we have installed but leave the drivers in the operating system.
To do that, in the Device Manager window we expand Ports (COM & LPT) section
Right-click and click Uninstall on the MTK USB Port
- In the Confirm Device Uninstall window make sure that the box Delete the driver software for this device is empty
- You need to leave the drivers in the operating system and only remove the device that you added
- Click on the OK button to finalise
Now, when you will connect your turned off MTK device to the Windows 10 computer by USB, the device will be recognized either trough a MediaTek Preloader USB VCOM Port interface or as a MTK USB port if it is bricked or it has bad/corrupt firmware. The SP Flash Tool will be able to transfer the firmware to your device trough this interfaces. Make sure you connect the device after you press the Download button in SP Flash Tool, as the communication interface will only be alive for 2 seconds if no data is being sent.
Download SP Flash Tool v3 & v5 – Latest versions:
http://laurentiumihet.ro/technology/download-sp-flash-tool-v3-v5-latest-versions/
TUT found here : http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/
cheers
Lost IMEI Restore
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI. I will split the tutorial into two parts.
BACKING IMEI :
-First step before performing all these things is that your phone should be rooted.
When your phone is in normal state with everything functioning install Root explorer and navigate to the below location
Code:
>ROOT>DATA>NVRAM>MD>NVRAM>NVD_IMEI>MP0B_001
-Now copy this MP0b_001 file to your SD card or PC whichever place you feel the file we be safer.
-Now download MTK Droid tools .
-Now extract the zip file and open the MTK droid tools exe file.
-Now in your phone turn on USB Debugging by going to Settings->About phone-> Developer options and there turn on USB debugging.
-Now connect your phone and MTK droid tools should be able to detect your phone. U should see a window like this appearing after your
phone has been detected.
-Now press the ROOT button present in lower right corner. When it asks Supersu grant in your mobile click allow. After MTK droid gets
access u should see a green colour box appearing in the lower left corner which means u have correctly granted access to MTK droid.
-Now click on the IMEI/Nvram tab. A window should open and click backup NVRAM and MTK droid tools would take a backup of NVram in
its folder.
RESTORING IMEI :
-Now when you lose IMEI first try this method. Now take the MPDB_001 file which you took backup at the first step and navigate through
Root explorer to this location ->ROOT->DATA->NVRAM->MD->NVRAM->NVD_IMEI.
-Now paste that file and replace the one present there. Set the permissions for that file as RWER-ER-E. Now reboot your phone and you
should be able to get your IMEI back.
If you still haven’t got IMEI open MTK droid tools and connect your phone and press ROOT again and give MTK droid tools root access.
-Now click on IMEI/Nvram tab and select Restore option and restore the NVram backup which you took earlier. Now reboot your phone and
you should be able to get your IMEI.
Extreme method :
-After performing all the above if you haven’t still got IMEI. Now switch off your phone and open SP Tools and connect your phone.
Click on format and format your whole phone. ( This wipes whole of the phone including NVram region ).
-Now flash stock ROM through SP Tools and after it completes start up your phone. ( Don’t be surprised. Your IMEI will still be in lost state
only ). Now root your phone.
-After successful rooting now connect your phone to MTK Droid tools and again press ROOT button and grant root access to MTK Droid
tools. Now click on IMEI/NVram tab.
-Now as you see in the image above you can see two boxes IMEI1 and IMEI 2. Now enter your device IMEI numbers manually in those two
boxes.( You can get your IMEI no’s from your phone box ). Now click replace IMEI. Now reboot your phone and you should be definitely able
to get your IMEI restored.
MTK DROID TOOLS LINK : https://www.androidfilehost.com/?fid=24438995911972546
found: http://www.androiddevs.net/restoring-lost-imei-mtk-phone/
Beautiful @skeleton1911
What a gread job!
Gesendet von meinem Elephone P8000 mit Tapatalk
Thanks for this great work.
And for all the Linux Users out there. SPFlashtool also work perfekt with x86-64 Linux distros.
The most anoying point and greatest drawback is, that with newer Ubuntu based distros like Mint, since 14.04, the builtin modem-manager don't like Mediatek, so you have to blacklist Mediatek in the udev rules.
How this will done, is written in that great tutorial by Miss Montage.
Cheers
The direct link for Tapatalk Users: http://forum.xda-developers.com/general/rooting-roms/tutorial-how-to-setup-spflashtoollinux-t3160802
jknarf said:
Thanks for this great work.
And for all the Linux Users out there. SPFlashtool also work perfekt with x86-64 Linux distros.
The most anoying point and greatest drawback is, that with newer Ubuntu based distros like Mint, since 14.04, the builtin modem-manager don't like Mediatek, so you have to blacklist Mediataek in the udev rules.
How this will done, is written in that great tutorial by Miss Montage.
Cheers
The direct link for Tapatalk Users: http://forum.xda-developers.com/general/rooting-roms/tutorial-how-to-setup-spflashtoollinux-t3160802
Click to expand...
Click to collapse
arnicika said:
Beautiful @skeleton1911
What a gread job!
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
thank you very much
This should be pinned!
BlueFlame4 said:
This should be pinned!
Click to expand...
Click to collapse
Already done
Gesendet von meinem Elephone P8000 mit Tapatalk
A German Translation for #1 and #2 is available there: http://www.android-hilfe.de/thema/a...n-und-anwenden-unter-windows-8-8-1-10.759025/
skeleton1911 said:
Lost IMEI Restore
RESTORING IMEI :
-Now when you lose IMEI first try this method. Now take the MPDB_001 file which you took backup at the first step and navigate through
Root explorer to this location ->ROOT->DATA->NVRAM->MD->NVRAM->NVD_IMEI.
[...]
Click to expand...
Click to collapse
Please note neither the name of the IMEI file nor its position seem to be constant, but may vary from one Stock ROM version to another.
In my case (Stock Rom version 20151203) it took me some time to find a file named "MP0B_001" within the following location:
/nvdata/md/NVRAM/NVD_IMEI
Maybe the easiest way to find the IMEI file is to search for the keyword "NVD_IMEI" within some root file manager as this does not seem to change.
@skeleton1911 I'm having problems with MTK DROID TOOLS, it won't detect my elephone p8000.
I was wondering can you help me with this?
Rav3r1 said:
@skeleton1911 I'm having problems with MTK DROID TOOLS, it won't detect my elephone p8000.
I was wondering can you help me with this?
Click to expand...
Click to collapse
you want to restore your imei?
do this: it just takes a minute
You can solve your imei problem with this "MTK Engineering Mode" from playstore.
You open the app and go to: MTK Settings, Connectivity, CDS Information, Radio Information, Phone 1.
Here you have at the top "AT+". here you complete to >>AT+EGMR=1,7,"123456789012345"<<, of course with your imei, which ist standing on the akku-cover.
Then, very important: You have to put in a space after "AT+", so it looks like >>AT+ EGMR=1,7,"123456789012345"<<
Click "SEND AT COMMAND". Thats it.
For the second imei do the same with >>AT+ EGMR=1,10,"123456789012345"<<
In Lost IMEI Restore part of tutorial MtkDroidTools v2.5.3.zip link to infected file. PLEASE REMOVE or change to https://androiddatahost.com/cj8vrp
SHA256: 40fe0934c24b17bc49e9b96c24c873fc5c4e0744ee31c8c5193c50168ee43839
File name: MtkDroidTools v2.5.3.zip
Detection ratio: 32 / 52
Analysis date: 2016-12-15 22:42:21 UTC ( 2 days, 1 hour ago )
virustotal.com/en/file/40fe0934c24b17bc49e9b96c24c873fc5c4e0744ee31c8c5193c50168ee43839/analysis/
@skeleton1911
I believe that first post need a big refresh.
The new All-In-One Mediatek driver don't need to disable driver signing. and contain both USB ADB and USB preloader driver for Mediatek chips
For the Flashtool version (Windows/Linux) there is a specific thread where you can redirect all user to get latest version of Flashtool program.
Related
hi this phone was rooted on 25th sept(after many months of launch).i request the devs here someone to please develop an custom rom for the mobile or just mod the current one.
How to root?
By this time, many users may get rooted but there is no tutorial for that in androidforums so posting here.
Plus, I have modded original boot.img of A52 myself and added init.d support plus support for initializing ext2,3,4 modules on boot.
DOWNLOADS:
1) Unsecured boot.img (zip contains unsecured boot.img + A52 scatter file)
http://www.mediafire.com/?h9ubm9dhq9n7jjd
2) SP.FlashTool
http://forum.xda-developers.com/attachment.php?attachmentid=1353992&d=1348592592
3) Drivers
http://forum.xda-developers.com/attachment.php?attachmentid=1353943&d=1348591411
4) UnlockRoot
http://www.unlockroot.com/
Note: Usemastermind1024 as password to download above files.
Advantages of my boot.img:
I have added init.d support plus ext2.ko,ext3.ko & ext4.ko modules initialization on boot.Just place this ko files in /system/lib/modules/ after rooting the device, u will be able to use Link2SD with ext2,3 or 4 filesystems on your 2nd sdcard partition.
Press thanks if helped
Reference for flashing: MT65x3 flashing tutorial
Read the above tutorial first so u get idea how to flash an img file using SP FlashTool.
STEPS TO FLASH BOOT.IMG:
1) First install the drivers you downloaded & then run SPFlashTool, preferably as administrator (not mandatory)
2) Select USB mode under Options
3) Click Scatter-loading & select scatter file you downloaded from above links.
4) It will automatically load boot.img if it's in the same folder with scatter file otherwise click BOOTIMG & select the downloaded unsecured boot.img
5) Turn off the device fully, remove the battery for 5 seconds to be sure n re-insert the battery but do not power on device.
6) Attach the usb cable with PC but not with device
7) Now click on "Download" button on SPFlashTool, it will show searching for device in lower panel.
8) At this time, attach the cable with device in power off state
9) Now as soon as u attach the cable to device in power off state it will show a progress bar in lower panel n then a dialogue which states successfully flashed n another dialogue showing green colored ring n stating Download OK.
12) Close the dialogues, close the program n reboot the device by pressing power key.
STEPS TO ROOT DEVICE:
1. Power on device.
2. Enable USB Debugging.
- Settings > Application tab > Applications > Development > USB Debugging
3. Install UnlockRoot in pc
4. Attach device using usb cable in debugging mode(u just enabled it in step-2) to pc.
5. Now Run UnlockRoot program and click Root button
6. Confirm online device Micromax A52 in the list which pop-up.
7. Let in finish the procedure and Restart device when is asks.
8. See new Superuser app in app drawer
9. Viola...!!! Your A52 is now rooted.
UnlockRoot does not install Busybox on device so after u rooted the device install busybox to work with many root apps.Search Play Store for Busybox Installer by Jrummy OR BusyBox free by Stericson...
DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, . Please do some research if you have any concerns before flashing! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device
Press thanks if helped
................................
2013-07-21 -->> OP update links for download file UPDATE-SuperSU-v1.41.zip.
2013-06-22 -->> OP update links for download file UPDATE-SuperSU-v1.34.zip.
2013-06-08 -->> OP update links for download file UPDATE-SuperSU-v1.32.zip.
2013-06-03 -->> OP update links for download file UPDATE-SuperSU-v1.30.zip.
OP update links for put CWMv6: Direct download CWMv6 (recovery.img) by williegomezt.
For new JB V07 update: Direct download drivers and SP_Flash_Tool_exe_v3.1224.01.
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
dskrilz said:
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
Click to expand...
Click to collapse
You searched if there is someone who managed to ROOT your device here in xda?
Root MANY ANDROID! [Upd: 24.04.2013]
I'm also on other forums and had been trying to help a friend who needed to ROOT [BLU Tank 4.5] that has fastboot mode.
[TUTORIAL] Root Blu Dash 4.0
We try ROOT through this process and believe that you can try too. So I do not have these devices, and you must read a lot before making a decision. Before any procedure must have stock ROM or at least a backup of it.
BLU Dash 4.0 has [Chipset Qualcomm MSM8225 Snapdragon]. Furthermore, this procedure Super_Su did not work for with the original recovery BLU VIVO 4.3 ROM JB 4.1.1. With recovery original it says "Installation aborted".
Blu Vivo 910a Jelly Bean generic Rom- How to root
I have a Blu Vivo 4.3 910 a which I updated with the generic Rom from Blu.Did someone root this version.
I tried many like One Click, z4root Version 1.3, root with reset version v.29, but nothing is working.
Also it does not accept update zip Version v.25 it says aborted.
How could it be rooted?
lopestom said:
Download to perform ROOT (if your choice) and place them on your sdcard ---> UPDATE-SuperSU-v1.25.zip
[03.03.2013] SuperSU v1.25 ---> http://forum.xda-developers.com/showthread.php?t=1538053 << --- >> original link -- Thanks for this xda developers.
With the phone turned off, press POWER and VOL +.
Appears CWM v6 -> select install zip from sdcard ---> choose zip from sdcard -> find file with VOL - or VOL + file [UPDATE-SuperSU-v1.25.zip]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Select YES with POWER. There, at the end of the process SU is installed.
Go + ++ Go Back + + + up to find -> reboot system now. Select with POWER.
When you restart the phone, mark in ---> configuration ---> Security --> Unknown sources.
For more details see my other Thread --> Loss IMEIs
So you now have installed a upgraded SuperSU-v1.25.
This it! Your device is ROOTed. :good:
Credit to xda developers for UPDATE-SuperSU-v1.25.zip .
For helping to make it happen => Mario Doce; williegomezt
Click to expand...
Click to collapse
bluvivo said:
I have a Blu Vivo 4.3 910 a which I updated with the generic Rom from Blu.Did someone root this version.
I tried many like One Click, z4root Version 1.3, root with reset version v.29, but nothing is working.
Also it does not accept update zip Version v.25 it says aborted.
How could it be rooted?
Click to expand...
Click to collapse
You must have knowledge of tool SPFT- [SP Flash Tool] to put on BLU VIVO 4.3 device only file "recovery.img" by @williegomezt (CWMv6 - see my signature).
---------------------------------------------------------------------------------------------
Download links are directly updated in the forum.
lopestom said:
You must have knowledge of tool SPFT- [SP Flash Tool] to put on BLU VIVO 4.3 device only file "recovery.img" by @williegomezt (CWMv6 - see my signature).
---------------------------------------------------------------------------------------------
Update links direct in forum.
Click to expand...
Click to collapse
Thanks but there to I get the recovery.img file? The Flash Tool I have.
bluvivo said:
Thanks but there to I get the recovery.img file? The Flash Tool I have.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=33100711&postcount=51
Download [VIVO 910a CMW by williegomezt.rar] unzip the rar file with the password for placed on the post. Inside this file rar have [recovery.img (CWMv6)].
I have the img.file and the flash tool all goes well but and the download and the phone conected it does not have the driver for the USB.
So there is no download.I download the driver but still is not working.Any help?
lopestom said:
http://forum.xda-developers.com/showpost.php?p=33100711&postcount=51
Download [VIVO 910a CMW by williegomezt.rar] unzip the rar file with the password for placed on the post. Inside this file rar have [recovery.img (CWMv6)].
Click to expand...
Click to collapse
Correct procedures to install the drivers.
bluvivo said:
I have the img.file and the flash tool all goes well but and the download and the phone conected it does not have the driver for the USB.
So there is no download.I download the driver but still is not working.Any help?
Click to expand...
Click to collapse
What system you are using Win XP/Vista/7/8?
I'll pass the correct procedures to install the drivers:
On the computer:
Go to the Drivers folder and run "InstallDriver" (for the file I'm sending you).
On your device:
Connect the device to your computer, go to Settings, Options programmer, Activate and check "USB Debugging" and press OK.
On your computer:
1 - Go to device manager, click on unknown device or wrongly recognized (MT65XX Preloader);
2 - MT65XX Preloader updating drivers, click browse for driver software on this computer;
3 - Type of Device, click Show All, and then click Have Disk and browse to the folder "Driver\ADB" and select the file [android_winusb.inf];
See this image for [android_winusb.inf]:http://forum.xda-developers.com/showpost.php?p=38864558
4 - Select Android Composite ADB Interface;
5 - If message appears, requesting confirmation to install, confirm, appear to Windows Security box, asking if you want to install Google Inc, Select Always Trust and install;
6 - Now just do the procedure in SPFT to put only the recovery (CWMv6).
Remember that with Win7 installations should always be run as administrator!
Check this with @tanmay5 in mmxA110 #38 ------->>>> http://forum.xda-developers.com/showthread.php?t=2167244&page=4
For Win8 disable UAC:
3. open control panel in win8 the metro you one not classic one. I think u all might be knowing how to go there.
There click on general tab then click - advanced startup n press restart.
then go to troubleshoot option in press option 7 i.e disable driver signature. Thats the most Important step.
4. your pc will get restarted null enter in the in that option.
5. your UAC (User Account Control) must be enabled atleast to the recommended level/2nd one from the top.
Click to expand...
Click to collapse
This is information within [VIVO 4.3 Tool\Driver_Auto_Installer\Driver_Auto_Installer]:
Driver_Auto_Installer_v1.1208.00
ReadMe.txt
Click to expand...
Click to collapse
Code:
This application will install USB com port driver for MediaTek's device those IDs are listed below:
1."VID_0E8D&PID_0003" (FeaturePhone & Smartphone BootROM - MTK USB Port)
2. "VID_0E8D&PID_0023&MI_00" (FeaturePhone - MTK USB Modem Port)
3."VID_0E8D&PID_0023&MI_02" (FeaturePhone - MTK USB Debug Port)
4. "VID_0E8D&PID_2000" (SmartPhone - PreloaDer USB Port)
5. "VID_0E8D&PID_2001" (SmartPhone - DA USB Port)
6. "Vid_0E8D&PID_2006&MI_02" (SmartPhone - Kernel Gadget USB port, Please customize your kernel VID/PID)
"Vid_0E8D&PID_2007"
"Vid_0E8D&PID_200a&MI_02"
The application user must belong to Administrator group or have the privilege to install driver.
the execution of the InstallDriver.exe will install the driver, and the UninstallDriver.exe is special for remove driver.
the InstallDriver.exe will remove the legacy version of driver before install current driver automatically.
Notes:
1. Windows 2003 use the INF files which under the 2K_XP_COM
2. The device which generates two com ports (USB Modem Port Driver & USB Modem Debug Driver) only support Systems after Win XP sp3 version.
If you want to support these devices in Win XP Sp2, add these patchs:
http://support.microsoft.com/kb/918365/
http://support.microsoft.com/kb/935892/
lopestom said:
Download to perform ROOT (if your choice) and place them on your sdcard ---> UPDATE-SuperSU-v1.34.zip
[03.03.2013] SuperSU v1.34 ---> http://forum.xda-developers.com/showthread.php?t=1538053 << --- >> original link -- Thanks for this xda developers.
Works for both models BLU VIVO 4.3 - D910a and D910i. If you are not with this device, then you should search or create CWM for your own device.
For put CWM v6 in BLU VIVO 4.3 see this: HOW TO PUT CWM v6.0.1.2 by williegomezt
For more details to put "recovery.img" using SPFT see Flashing only part of the ROM: [TUT]MTK Android (Sp flash tool ) tutorialhttp://forum.xda-developers.com/showthread.php?t=1982587
Download SP_Flash_Tool_exe_v3.1224.01 and INSTALL drivers: VIVO 4.3 Tool 20130322.rar
On your device ---> configuration ---> Security --> check the option=> Unknown sources.
Instructions after putting CWMv6: With the phone turned off, press POWER and VOL +.
Appears CWM v6 -> select install zip from sdcard ---> choose zip from sdcard -> find file with VOL - or VOL + file [UPDATE-SuperSU-v1.34.zip]
Select YES with POWER. There, at the end of the process SU is installed.
Go + ++ Go Back + + + up to find -> reboot system now. Select with POWER.
So you now have installed a upgraded SuperSU-v1.34.
That's all! Your device is ROOTed. :good:
Credit to xda developers for UPDATE-SuperSU-v1.34.zip .
For helping to make it happen => Mario Doce; williegomezt
Click to expand...
Click to collapse
I have an error when I use SPFT. I downloaded and installed the MT6577 USB VCOM drivers from http://www.filecrop.com/MT6575-USB-VCOM-drivers.html and they installed fine.
I then followed your instructions for loading your recovery.img file to my phone. I got as far as the blue load line and then I got an SPFT error
BROM EROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
and then it stops.
Any ideas?
rederikus said:
I have an error when I use SPFT. I downloaded and installed the MT6577 USB VCOM drivers from http://www.filecrop.com/MT6575-USB-VCOM-drivers.html and they installed fine.
I then followed your instructions for loading your recovery.img file to my phone. I got as far as the blue load line and then I got an SPFT error
BROM EROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
and then it stops.
Any ideas?
Click to expand...
Click to collapse
This is something related to installing drivers. Another interesting case is USB plug behind the PC.
Check this for more drivers MT6577. Download your version for SO (W8/W7/Vista/XP )--> [TUT] Instructions MTK6577 USB VCOM Driver Installation
I read in other posts that you have Win8 and this is not good. But many friends managed. Read post # 10, disable UAC, see picture of correct installation and try again. See this for correct install drivers: http://forum.xda-developers.com/showpost.php?p=38864558
Another attempt is to use scatter file this on my forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Download the BLU_D910i_V06_GEN_T8113_20130322_CWM.rar, unzip. In SPFT, select only the option [RECOVERY].
Root blu dash 4.0
dskrilz said:
Do you think this will work with other BLU devices? I am thinking about buying a Dash 4.0, but I wouldn't want it without root.
Click to expand...
Click to collapse
Watch this video: youtube-->How to root Blu Dash 4 0
follow his link to get the rootme pack...
You will need the adb driver... since BLU doesn't provide this anywhere you can install it via installing pdanet...
search google for "topnotchtablets installADBDriver"
I first installed ADB, then I ran the root script and voila my BLU DASH 4.0 was rooted... took me a while to find this out.. searched everywhere for the correct adb driver...
enjoy!:good:
I cannot post links yet because I just registered to this forum today... I would have posted the links tho.. sorry
zachpainter77 said:
Watch this video: youtube-->How to root Blu Dash 4 0
follow his link to get the rootme pack...
You will need the adb driver... since BLU doesn't provide this anywhere you can install it via installing pdanet...
search google for "topnotchtablets installADBDriver"
I first installed ADB, then I ran the root script and voila my BLU DASH 4.0 was rooted... took me a while to find this out.. searched everywhere for the correct adb driver...
enjoy!:good:
I cannot post links yet because I just registered to this forum today... I would have posted the links tho.. sorry
Click to expand...
Click to collapse
I have helped some users BLU. Since then sought to unite all and maybe we can do a full forum here on xda.
So, see this #47: Blu Dash 4.0 D270i Rom damaged after Root
and this: [Q] Custom ROM for the BLU Dash 4.0???
BLU Users Unite
lopestom said:
I have helped some users BLU. Since then sought to unite all and maybe we can do a full forum here on xda.
So, see this #47: Blu Dash 4.0 D270i Rom damaged after Root
and this: [Q] Custom ROM for the BLU Dash 4.0???
Click to expand...
Click to collapse
y this is a good idea . . . There is not enough support for BLU devices out there . . .
ROOT in BLU VIVO 4.3 - JB 4.1.1 - without using SPFT
Hello I did otherwise the root device of people who do not know or do not want to use SPFT.
So read the instructions well and be happy. I researched other ways, but just found this one with Chinese software. Remember: It will install an application Chinese. But I made a tutorial that this app can be removed later.
TUTORIAL ROOT in BLU VIVO 4.3.pdf
VRoot_1.2_Setup.rar
Or see more images here: Guide - How to Root BLU VIVO 4.3 with JB 4.1.1
HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910a
"Follow my instructions:
- Start again with a new download of the official file.
The battery must be at least half the load.
1. Visit the website: blu.kiwibed.com You must enter the username and password to access the folders
Username: blusoft
Password: aplic10
2. Enter the folder Aplic Software / Software Vivo 4.3 generic.
3. Select the model of your phone (BLU-D910I or BLU-D910A)
4. Download the zipped file on your computer
5. After downloading the file, upload it to the direct sdcard. No need to unpack
6. Turn off the phone and turn it back on leaving the keys pressed simultaneously volume + and power.
7. Menu will appear in the android recovery. With the volume buttons you browse options in this menu and the power button validates the selected option.
8. Appear => Execute/Press --> Wipe factory
9. Appear => Execute/Press --> Wipe cache
10. Choose the option: "apply update from sdcard"
11. Browse by sdcard and choose the file you downloaded.
12. Then the phone will restart and update the new version of android."
I followed the above instructions, now my phone won't boot. Message was; Installation Aborted. So I re-boot it and got stuck to the "Blu Logo". Any help is greatly appreciated to go back to stock rom (ics).
Fherby said:
I followed the above instructions, now my phone won't boot. Message was; Installation Aborted. So I re-boot it and got stuck to the "Blu Logo". Any help is greatly appreciated to go back to stock rom (ics).
Click to expand...
Click to collapse
You're writing in the wrong place. Furthermore, the update should be placed with the original recovery. If you have a BLU VIVO 4.3, then you should not fear anything. So many people make the direct download to phone. This is wrong!
First on the PC and then put the sdcard. It may be that the file you downloaded came with errors.
If you have CWMv6 and backup, is back to normal. If not, try again another update file. If not, put JB version 6 in forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Read all the posts and see how to put the JB version 7.
Do not write here again on other matters, that is not the issue ROOT!
lopestom said:
You're writing in the wrong place. Furthermore, the update should be placed with the original recovery. If you have a BLU VIVO 4.3, then you should not fear anything. So many people make the direct download to phone. This is wrong!
First on the PC and then put the sdcard. It may be that the file you downloaded came with errors.
If you have CWMv6 and backup, is back to normal. If not, try again another update file. If not, put JB version 6 in forum [TUT] HOW TO INSTALL ROM 4.1.1 JB - BLU VIVO 4.3 D910i. Read all the posts and see how to put the JB version 7.
Do not write here again on other matters, that is not the issue ROOT!
Click to expand...
Click to collapse
Sorry for writing my comments in the wrong place. Anyway, thanks for the additional info you've provided.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fenris Features
Built in current MicroG
Built in Magisk
Built in BusyBox
Built in GNU Utils compiled for android ( bash etc )
Radically debloated
Built for Lucky Patcher ( lvm already patched and modded playstore in place )
Working Desktop Mode ( PC mode ), Yes you read that right
320 DPI and working camera UI etc.
Better sized Launcher icons.
Shipped as a old school zip so fully customisable by anyone with winrar
Bugs
Wallpapers etc missing ( belongs to an apk i deleted and cant be bothered to track it down ) fixed in beta 2
Standard filemanager is replaced by CM native file manager ( dont want the big H knowing whats on your drive ) so some share functions may not be available
but SMB over the network is fine and thats all im interested in.
Both the TWRP 's are flaky, this version https://forum.xda-developers.com/honor-view-10/development/recovery-twrp-3-2-1-0-t3769917 has just refused to boot on me twice despite a decrypted data partition. But thats not down to Fenris in any way. The second twrp ( view 10 ) is no longer possible. It requires formating /data and by doing that wipes all the themes/wallpapers and screws the theming engine so i am having to stick with the first TWRP.
Unfortunately it BARELY works, just good enough to flash Fenris and associated zip kind of correctly.
Because of a crap TWRP Magisk needs to be setup on first use and download the manager, ie internet needed. It also can not update its zip so that has to be flashed by hand
Battery.... Tablet manager had to go, it deliberately interferes with LP in-app spoofing, but it also provides battery statistics and possibly with it missing, battery life could be worse than stock
( memory handling could also be compromised ). Its a damn hard thing to check since i have never run the tab stock. Tablet manager is back, it controls the recents screen which is broken without one of tablet managers services. Writing a startup script to disable some TM services, but at moment i use MyAndroidTools to do same
Maybe more, this is a beta.
Dev Info.
Huawei have done a good job with their Andfroid shell, its very memory aware and frugal ( unlike samsung and HTC ), its a very good base for Fenris
I would have kept a lot more native apk's but then there are some security concerns so anything with a free line out had to go ( except HwShare, use at your own risk )
If there is demand i will release a total stock zip so peeps can mix-match and roll their own.
Information
Based on MediaPad M5 8.4 SHT-AL09 hw eu Schubert-AL09A 8.0.0.196(C432) Firmware 8.0.0 r1 EMUI8.0 05014XYF.
the link for this firmware https://androidhost.ru/tuA
You must be on this firmware to grantee Fenris operating correctly ( currently Fenris does not ship the vendor or kernel due to issues with the TWRP available being flaky )
, fenris may work on other firmware ( Android O ) but this is for you to try.
I will most prob keep Fenris SHT-AL09 updated as i find stuff i like/do not like, but i AM NOT a Dev, i only get my hands dirty when i need to, so as far as support goes, dont expect much and you will not be disappointed.
My tested method of getting fenris on your SHT-AL09
......download Fenris from here https://mega.nz/#!BKpX2YpT!DhotPKAkJvASYQUPeUlNz3MrZanmFNCxmm6tcd4qcE4
......download Huawei MediaPad M5 8.4 SHT-AL09 hw eu Schubert-AL09A 8.0.0.196(C432) Firmware 8.0.0 r1 EMUI8.0 05014XYF from here https://androidhost.ru/6n0
......downgrade using the dload method
......Get a bootloader unlock code using DC unlocker method ( keep the bootloader unlock code, you will friggin need it )
......Unlock bootloader using Fastboot Unlock Method
......download MediaPad M5 8.4 SHT-AL09 hw eu Schubert-AL09A 8.0.0.196(C432) Firmware 8.0.0 r1 EMUI8.0 05014XYF. from here https://androidhost.ru/tuA
......Upgrade using the Dload method
......Unlock bootloader using Fastboot Unlock Method ( dont worry the code is the same )
......Go into you new 196 system and Activate ADB and OEM-Unlock
......Flash this TWRP https://forum.xda-developers.com/mediapad-m5/development/recovery-twrp-3-2-2-1-t3813825 using TWRP fastboot method
......DO NOT LET IT BOOT INTO SYSTEM, BOOT INTO TWRP INSTEAD
......Have a OTG USB adapter ( you can also use the sd card but that is a pain ) and Stick ready , copy all the files your going to need in the further steps onto it
......Hook up the stick and Flash Disable_Dm-Verity_ForceEncrypt_Quota_05.21.2019.zip from here https://zackptg5.com/android.php#disverfe
......Also Kernel-Sepolicy-Patcher.zip from here also https://zackptg5.com/android.php#disverfe
......THen finally flash Fenris
......Boot ito Fenris
TWRP fastboot method
1.... Make sure you have latest HW adb drivers installed ( check by getting an adb shell to work )
2.... Download latest Android platform tools https://developer.android.com/studio/releases/platform-tools
3)... Decompress etc, get to fastboot dir, open a CMD there
4)... Copy your TWRP image to same dir
5).... Boot into Download mode ( vol down while plufgging USB into computer with drivers set up )
5).... fastboot.exe flash recovery_ramdisk xxxxxxxxxx.img
6).... Get frigin ready to pull the usb and hold power + vol UP ( to reboot int TWRP you just flashed ) DO NOT LET IT BOOT INTO SYSTEM
7).... fastboot.exe reboot
8).... Pull USB, Boot into TWRP
9).... TWRP reboot Menue to shutdown
Dload Method
1.... extract the archive
2.... copy dload folder to root of a fat32 formated sd card
3.... boot up, enable dev options
4.... In dev options enable OEM-unlock ( you will need to be on internet from setup onwards ) unlock and adb
5.... In phone dialer dial *#*#2846579#*#*
6..... Get to upgrade from sd card and hit it.
7..... Phone reboots and does the ****
8..... If you have used online Erecovery downgrading may fail but if setting up from new ( unboxing) this will def work
Dc Unlocker Method ( copied from a p20lite thread , but works for m5 identically )
1)First connect your phone to the PC using the original USB cable.
2)When drivers are installed a popup screen would appear to view the "HiSuite" drive. This is a created drive-letter which contains a HiSuite Software downloader. Click to open or use the Windows Explorer to browse to this virtual drive.
3)Install the HiSuite software - this is important to get the correct drivers AND correct COM ports installed on your system. Skipping this step will result in non working DC Unlocker software.
4)When all is done go to the settings in your phone and open: System -> About Phone and tap the Build-number line about 7 to 8 times. Most likely the phone will ask for a PIN to active the developers mode. This is the code you've setup to use your phone. If you're already have a "developers option" you can skip this step.
5)Now click the "back" arrow once and select "Developer options".
6)Tap OEM-Unlock to activate it (confirm if needed), scroll down and tap USB Debugging to turn it on.
7)Your phone should ask permission to connect your PC (with some MAC address). Confirm it so the connection is approved. If that doesn't show up disconnect the USB cable and check if the USB debug mode is still active in the "Developer options". Than reconnect the cable to your PC.
ready to use the DC-Unlocker software to get our unlock code:
8)First you need some credits and you can buy the using this link: https://www.dc-unlocker.com/buy
9)Just fill in the the fields User-name, E-mail and Credits. Leave the "New user account" option selected if you are a new user.
10)For the Credits you only need 4 of them. I, initially, bought 5 so I still have one left
11)You'll receive a confirmation e-mail with a username and password. These are needed a bit later.
12)Extract the DC-Unlocker client to a fold and start it by clicking dc-unlocker2client.exe using the Windows Explorer (or any other file manager). To be sure you can also right-click the file and start the program using Administrator credentials.
13)Select in the right portion of the program the tab "Server" and enter the username and password you've received by mail. Check the "Remeber" box and click "Check login" to verify your account.
14)Click in the left portion of the program the dropdown list below "Select manufacturer" and choose "Huawei phones".
15)Leave the droplist "Select model" selected at "Auto detect (recommended)".
16)Grab your phone and open your dialer to type this code: *#*#2846579#*#* - this will get you into the service menu of the phone.
17)Tap 1. Background Settings -> USB Port Settings and select Manufacture Mode and than tap Close.
18)Put the phone done and let your PC install the newly found drivers.
19)If that's done click the Magnifying glass in the DC-Unlocker client software.
20)If all is connected correctly your phone is detected and a message in the white part of the program will tell you so. Also the "Select Model" field should display Huawei HiSilicon Kirin Android if the detection is succesfull.
**ready to read the unlock code! Yeah!
21)Click in the right portion of the DC-Unlocker client on the tab Unlocking.
22)Several buttons are visible but just click Unlock which could take a few moments before something is displayed in the white area at the bottom of the program window.
23)The unlock code can be copied and pasted - so please do copy the number to a text file and store it savely on your computer or in your cloud.
Fastboot Unlock Method
1).... Make sure you have latest HW adb drivers installed ( check by getting an adb shell to work )
2).... Download latest Android platform tools https://developer.android.com/studio/releases/platform-tools
3)... Decompress etc, get to fastboot dir, open a CMD there
5).... Boot into Download mode ( vol down while plugging USB into computer with drivers set up )
6).... fastboot oem unlock xxxxxxxxxxxxxx
Glad to read that the development of our Schubert isn't dead
massima said:
Glad to read that the development of our Schubert isn't dead
Click to expand...
Click to collapse
Not sure about that Seems barren in terms of real development. But in this case stock is a very good base, and in terms of memory usage very competitive with LOS, so in this case do not miss real open source code for the device.
The TWRP for our device is not great, and thats something i will get hands dirty fixing.
Any chance you could upload few pictures to show us how pc mode looks on smaller device, and will ever update your rom to 9.0?
Thanks in advance.
xabat said:
Any chance you could upload few pictures to show us how pc mode looks on smaller device, and will ever update your rom to 9.0?
Thanks in advance.
Click to expand...
Click to collapse
Yes sure will get a few screenshots out.
Will update to 9 when the dev community ( LP, Xposed, and all the other projects ) catches up.
At the moment we are prob a year away. ( Xposed barely works on EMUI 8 ).
Fenris is not your normal developers rom, its not about the latest version or untested beta code. Its about providing a stable platform for "alternative" open source code projects focused on Penetration testing, and pushing the boundaries.
any chance you could tell us how to activate desktop mode on stock rom ?
Are you rooted with the TWRP mentioned in the post ?
If not not much point in going further, plus its not an easy job mate, you good at messing around with your internal files ? Permissions and selinux contexts ? Edify script ? If so then you prob could do it. Otherwise best not even start.
vecna said:
Are you rooted with the TWRP mentioned in the post ?
If not not much point in going further, plus its not an easy job mate, you good at messing around with your internal files ? Permissions and selinux contexts ? Edify script ? If so then you prob could do it. Otherwise best not even start.
Click to expand...
Click to collapse
Yes, I unlocked bootloader months ago and I have root.
xabat said:
Yes, I unlocked bootloader months ago and I have root.
Click to expand...
Click to collapse
And twrp ? Cos your going to have to write an edify script to flash everything.
vecna said:
And twrp ? Cos your going to have to write an edify script to flash everything.
Click to expand...
Click to collapse
No I don't have twrp at the moment. I can't find working recovery for emui 9.
I wanted to see if desktop mode will work on android 9
xabat said:
No I don't have twrp at the moment. I can't find working recovery for emui 9.
I wanted to see if desktop mode will work on android 9
Click to expand...
Click to collapse
Well on EMUI 9 not happening, and not happening without TWRP anyway.
So why exactly are you on EMUI 9
I guess there is no external monitor support as I dident read that anywhere.
Is it a hardware limitation?
Well, this ROM is clean and awsome, i have the 10 inch tablet but i envy those who have the Schubert model as they can try this ROM??
Fenris is now at Beta 4, front post updated.
any development for this rom?
(I can not take credit for this, copied from their site- however) see links for official flashing tools & directions and here are complete firmware links to official firmware:
FIRMWARE
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
Google Drive - Virus scan warning
drive.google.com
TOOLS
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
_______________________________________________________________TPST Tool User GuideCatalog
TPST Tool User Guide 1
1. Introduction 1
1.1 Purpose 1
1.2 Intro 1
2. Install 1
2.1 Install USB Driver 1
2.2 Install TPST 4
2.3 Install model 6
3. Steps to Flash Software 8
3.1 Run TPST 8
3.2 Refurbish the software ( Refurbish function will erase user data) 9
1. Introduction
1.1 PurposeThis user guide describes the operations of upgrade functions about TPST.
Please trust all warnings from antivirus software if any.
1.2 IntroTPST is applied to equipment management system on PC application terminal, and take charge of connecting mobile phone terminal equipment to do software updating.
2. InstallBefore upgrade, please prepare the following tools
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
2.1 Install USB Driver(1) Download, Unzip and open the Driver : Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar: https://drive.google.com/file/d/1BvhOiiKwJf5MXHyHl2YIK5jvHXRMvpjb/view?usp=sharing
(2) Operates as follows:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.2 Install TPST(1) download the TPST_Frame setup V1.8.0.msi to local:
https://drive.google.com/file/d/1NQD-ByfddHMbzYJrwXGBkXCR7FP2yWyd/view?usp=sharing
(2 )Open the TPST_Frame setup V1.8. 0.msi and operates as follows:
(3) All the installation files and logs are record in the path C:\Program Files (x86)\TCT\TPST\Tool.
2.3 Install model(1) Open the T810_Model_DLL_Setup_v0.0.3.msi:
https://drive.google.com/file/d/1fzjdoDJGKxtM2kTrEl3WPFj9tSgexGS3/view?usp=sharing
(2 )Operates as follows:
(3) All the T810 model information are stored in the path C:\Program Files (x86)\TCT\TPST\Model\T810
3. Steps to Flash Software3.1 Run TPST(1) Click windows “Start” button to enter start menu, and then find TPST shortcut as below figure, or open the TPST in desktop screen.
(2) Click “Load ” menu and select the mode T810 to load it, ex Figure1
Figure 1
Refurbish the software ( Refurbish function will erase user data)
Power off device. Switch to Download mode(made Device in power off status, long press Vol + and Vol – at same time and plug USB cable, when See warning screen, loose Vol- to switch to download mode) Tool will detect the COM port.
Click “Refurbish” button in the TPST tool to enter the feature. Then click “Browse” button, it will pop up a window, you can select a SW file to download.
In the “Select Software image file” screen, you can view catalog items on the left ,click the file you want to download, then click “OK” button, the file will be selected.
Select “XML LOG”, it can print a log file when you flash the software. Click “Browse” You can select a new xml log directory to save it.
(5)Click “Start Refurbish” button
(6)Wait a few minutes, you can see as follows, Download success.
Note：TPST to support download SW to multiple devices at same time， Suggested connect less than 7 devices to download at same time.
Hi, i ve flashed android 12 beta 3 but now i can't return back to android 11. I ve follow the guide same procedure as per android 12 but After flashing stabile android 11 i can enter only in fastboot .
how did you guys even get android 12? it says my phone is corrupted
yeah unfortunately my phone is now bricked. followed the instructions that tcl provided to upgrade to android 12 and now it says the phone is corrupted
dieudeglace said:
yeah unfortunately my phone is now bricked. followed the instructions that tcl provided to upgrade to android 12 and now it says the phone is corrupted
Click to expand...
Click to collapse
Did you try the beta 3?
Whatever the beta was on their website, if you have some sort of other version I'll take it.
dieudeglace said:
Whatever the beta was on their website, if you have some sort of other version I'll take it.
Click to expand...
Click to collapse
404
www.tcl.com
Jamesblondca said:
404
www.tcl.com
Click to expand...
Click to collapse
Pay attention to the CU number, thats how I got mine stuck on beta 3
but at least it works, jsut dont know if it will ever get upgraded.
I still tried it and I still cannot load into anything. I think I forgot to enable usb debug tho as fastboot fails to do anything, even something as simple as switching slots
o.class.jav said:
(I can not take credit for this, copied from their site- however) see links for official flashing tools & directions and here are complete firmware links to official firmware:
FIRMWARE
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
Google Drive - Virus scan warning
drive.google.com
TOOLS
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
_______________________________________________________________TPST Tool User GuideCatalog
TPST Tool User Guide 1
1. Introduction 1
1.1 Purpose 1
1.2 Intro 1
2. Install 1
2.1 Install USB Driver 1
2.2 Install TPST 4
2.3 Install model 6
3. Steps to Flash Software 8
3.1 Run TPST 8
3.2 Refurbish the software ( Refurbish function will erase user data) 9
1. Introduction
1.1 PurposeThis user guide describes the operations of upgrade functions about TPST.
Please trust all warnings from antivirus software if any.
1.2 IntroTPST is applied to equipment management system on PC application terminal, and take charge of connecting mobile phone terminal equipment to do software updating.
2. InstallBefore upgrade, please prepare the following tools
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
2.1 Install USB Driver(1) Download, Unzip and open the Driver : Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar: https://drive.google.com/file/d/1BvhOiiKwJf5MXHyHl2YIK5jvHXRMvpjb/view?usp=sharing
(2) Operates as follows:
2.2 Install TPST(1) download the TPST_Frame setup V1.8.0.msi to local:
https://drive.google.com/file/d/1NQD-ByfddHMbzYJrwXGBkXCR7FP2yWyd/view?usp=sharing
(2 )Open the TPST_Frame setup V1.8. 0.msi and operates as follows:
(3) All the installation files and logs are record in the path C:\Program Files (x86)\TCT\TPST\Tool.
2.3 Install model(1) Open the T810_Model_DLL_Setup_v0.0.3.msi:
https://drive.google.com/file/d/1fzjdoDJGKxtM2kTrEl3WPFj9tSgexGS3/view?usp=sharing
(2 )Operates as follows:
(3) All the T810 model information are stored in the path C:\Program Files (x86)\TCT\TPST\Model\T810
3. Steps to Flash Software3.1 Run TPST(1) Click windows “Start” button to enter start menu, and then find TPST shortcut as below figure, or open the TPST in desktop screen.
(2) Click “Load ” menu and select the mode T810 to load it, ex Figure1
Figure 1
Refurbish the software ( Refurbish function will erase user data)
Power off device. Switch to Download mode(made Device in power off status, long press Vol + and Vol – at same time and plug USB cable, when See warning screen, loose Vol- to switch to download mode) Tool will detect the COM port.
Click “Refurbish” button in the TPST tool to enter the feature. Then click “Browse” button, it will pop up a window, you can select a SW file to download.
In the “Select Software image file” screen, you can view catalog items on the left ,click the file you want to download, then click “OK” button, the file will be selected.
Select “XML LOG”, it can print a log file when you flash the software. Click “Browse” You can select a new xml log directory to save it.
(5)Click “Start Refurbish” button
(6)Wait a few minutes, you can see as follows, Download success.
Note：TPST to support download SW to multiple devices at same time， Suggested connect less than 7 devices to download at same time.
Click to expand...
Click to collapse
Why doesn't it show me a log line in my tpst ???
line two create xlm log is not seen on my pc why can it happen??
I know this is the TCL 20 section, but I see the screen shot has T799H... do you happen to actually have the T799H driver MSI?
Hello, I can't find the brush bag of t810h
你好，我在官网找不到t810h的刷包，然后T810刷包转砖
dieudeglace said:
I still tried it and I still cannot load into anything. I think I forgot to enable usb debug tho as fastboot fails to do anything, even something as simple as switching slots
Click to expand...
Click to collapse
Does it say so?
xer. said:
Hello, I can't find the brush bag of t810h
Click to expand...
Click to collapse
bro not brush bag but rom，it means刷书包hhh
MU.Eu said:
Does it say so?
Click to expand...
Click to collapse
MU.Eu said:
Does it say so?
Click to expand...
Click to collapse
Are you sure you had the correct model phone? Or it could have been a corrupted download. DM me your email address and ill share my sharepoint files with you.
o.class.jav said:
Are you sure you had the correct model phone? Or it could have been a corrupted download. DM me your email address and ill share my sharepoint files with you.
Click to expand...
Click to collapse
Also- these links still work...
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
o.class.jav said:
Also- these links still work...
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
Click to expand...
Click to collapse
Also, all of the tool downloads work still in this post. Download the tools- use the Android 12 ROM and follow the instructions. You can restore your phone.
WP17 is a rugged phone with Infrared Night Vision Camera, Helio G95 8GB+128GB 6.78“FHD+ 90Hz 64MP Triple Camera+16MP Selfie 8300mAh Android 11 Global Version.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bought me a Oukitel WP17, but couldn't find much information about this phone.
So I'm going to post info here for everyone to see and participate in how to flash, root and update the phone.
Update:
Using the MTK-bypass Small utility to disable bootrom protection(sla and daa).
According to this Exploit, this MT6785 Oukitel WP17 is fully unlocked, and should be flashable:
Windows10:
[2022-10-13 02:45:23.376773] Found device = 0e8d:0003
[2022-10-13 02:45:23.766358] Device hw code: 0x813
[2022-10-13 02:45:23.776413] Device hw sub code: 0x8a00
[2022-10-13 02:45:23.786386] Device hw version: 0xca00
[2022-10-13 02:45:23.796588] Device sw version: 0x0
[2022-10-13 02:45:23.806536] Device secure boot: False
[2022-10-13 02:45:23.816739] Device serial link authorization: False
[2022-10-13 02:45:23.816739] Device download agent authorization: False
[2022-10-13 02:45:23.836660] Disabling watchdog timer
[2022-10-13 02:45:23.846734] Insecure device, sending payload using send_da
[2022-10-13 02:45:23.896695] Found send_dword, dumping bootrom to bootrom_813.bin
Linux:
[2022-10-13 09:15:03.350097] Found port = /dev/ttyACM0
[2022-10-13 09:15:03.423994] Device hw code: 0x813
[2022-10-13 09:15:03.425119] Device hw sub code: 0x8a00
[2022-10-13 09:15:03.425523] Device hw version: 0xca00
[2022-10-13 09:15:03.425902] Device sw version: 0x0
[2022-10-13 09:15:03.426248] Device secure boot: False
[2022-10-13 09:15:03.426595] Device serial link authorization: False
[2022-10-13 09:15:03.426923] Device download agent authorization: False
However, flashing this phone in any Sp flash tool, is ending up in:
ERROR : STATUS_SEC_PUBK_AUTH_MISMATCH_N (0xC002001B)
The PUBK_AUTH part of this error message, is the Authorization for flashing Signed/verified image files. In the Oukitel WP17 firmware folder, downloaded from Oukitel Downlod Center, are their only certain files marked as verified.img, and now after testing in Sp flash tool, loading ALL non-verified files, you can flash these files to the phone without problems.
.
Stock Oukitel Android 11 recovery
Let's fix this phoneDownload these files:Oukitel WP17 firmware: ASW2100YJ_2201_T2046
Python 6.3.1
Mediatek VCOM, CDC, USB Serial & Smartwatch Drivers
UsbDk_Brom-mode
MTKClient
Flash_Tool_v5.2028
Computer with internet
But before we can start, we need to format the phone, to delete all old configurations and settings.
1. Start by extracting the firmware file to your desktop. Now open up the MTKClient zip file and drag all files to your firmware folder.
2. Now you Install all needed drivers: Mediatek VCOM, CDC, USB / UsbDk_Brom-mode.
3. Extract the Flash_Tool to your desktop and open the flash_tool.exe.
ONLY check the UNverified files. We will flash the verified files later. Click on the Download button when you're done. Take your dead phone and connect it to the computer with the USB cable. Hold down Volume+ Volume- and power-button together, hold the buttons until the flashing start.
Once you have flashed the UN-verified files to your phone, we start the process of flashing the verified files.
4. Now we need access to the verified files. open a prompt in the firmware.
To do that, go to the start menu and type CMD.
4. Right-click and copy the address and paste it in the prompt window.
5. Now we have to configure MTKClient to be able to communicate with the phone.
Past in these commands one at a time in to the promt window.
Code:
python setup.py install
pip3 install -r requirements.txt
6. And now finally after you have set up the environment in python.
The flashing of the verified files to you phone can begin. copy and paste in the hole commands.
Code:
python mtk w md1img,spmfw,scp1,scp2,sspm_1,sspm_2,cam_vpu1,cam_vpu2,cam_vpu3,gz1,gz2,lk,lk2,logo,dtbo,tee1,tee2 md1img-verified.img,spmfw-verified.img,scp-verified.img,scp-verified.img,sspm-verified.img,sspm-verified.img,cam_vpu1-verified.img,cam_vpu2-verified.img,cam_vpu3-verified.img,gz-verified.img,gz-verified.img,lk-verified.img,lk-verified.img,logo-verified.bin,dtbo-verified.img,tee-verified.img,tee-verified.img
Press Enter,
On the phone: Hold down Volume+ Volume- and power-button together, hold the buttons until the flashing start. Sit back and wait
.
Your phone will end up like this after boot.
Done ....
Now Update your phone by Android update service by going in to 'Settings / System and update phone.
.
-- IMEI Restore --
After formatting the phone. I use ModemMETA tool to restore my IMEI.
Select the “Smart Phone” option from “Platform Type” section. Same as , select “USB” option from “PORT” section.
Press the Connect button in Modem METAtool. Hold down the Volume+ Volume- and power buttons at the same time while plugging in the USB cable. Meta tool will detect the device and it will start to load Boot file, karnel port etc. You can see all the process in “Connection Stages” section.
After completing the configuration process, you will be able to see “Connect” message at the bottom of the tool.
Now click on “Load DB”. “Load Database file from target”.
Now click on search box and select IMEI download option from drop down menu.
A new IMEI window will pop up in front of you.
Type in yor IMEI : and hit on “Write” button from same window.
ILLEGAL to Creating your own: 12345.12345.1234
if everything went well, it looks like this.
Update:
Easy rooting with Magisk ......
This will Unlock your bootloader!.
Unlocking your bootloader will send your phone in to a emergency state, and delete all personal data on the device. Back up everything that is important to you, before proceeding with rooting your phone -
Download and extract AA - Install Android to your desktop. Turn off your phone and enter 'fastboot mode'. Connect your phone to the computer and open AA - Install ROOT.dat.
Install Magisk25.
.
-- WARNING --Thinking of upgrading to Android 12 / Android 13 ?
The camera drivers found in the Android 11 version your phone was shipped with -Are NOT in the Android 11 version from the Oukitel Download Center !.You will brake your 64MP Camera if you flash GSI ore the version from Download Center .
Although I copied all the files required to restore the camera, which you can find below in a zip file -
Are the drivers in all other roms and GSI's to control the camera missing.
--FM drivers are located in kernel. Most other oem drivers are in vendor. And the definitions are in system
However, there is an easy fix for this, and that is to make a backup of your working phone firmware before you start installing other versions of Android, so that you can always restore your phone from this backup, with the correct drivers and get a fully functional phone again.
Dump/extract/backup your Oukitel WP17 firmware.It is ALWAYS a good practice to backup your firmware. Any phones sooner or later will have issues and since you don't have a copy to restore yor phone, you will spend money sending it in for repair which sometimes costs more than the phone is worth. There are many ways to make a copy of your phone's firmware. search on the internet or use this simple guide:
All the files you need can be found under this video
And to everyone who already broken their phone and is now looking for a way to restore their phone. Have I already ordered a new WP17 that I will create a firmware backup of, and make available for you and a manual for how to restore. I will keep you updated on that, but it takes a long time to get things shipped from China these days.
.
Android 12 / 13 on Oukitel WP17 -I created a small script that quickly installs Android 12 and 13 on your phone.
Get rid of the pesky red text on the screen.
Android 12 ...
Android 13 ...
To begin with, you need to decide which version of Android you want on your phone.
To help you on your way, I suggest you check out the link below. It's important that you choose the ARM64 AB version.
Generic System Image (GSI) list
Notes about tinkering with Android Project Treble. Contribute to phhusson/treble_experimentations development by creating an account on GitHub.
github.com
In this example, let's say you want to install Spark OS Android 13.
Go to the download page and select the latest version.
1. Extract Android 13 from the downloaded file to your desktop.
2. Rename the file to GSI.img
3. Download and extract AA - Install Android to your desktop
4. Move the GSI.img file to the install folder.
Double-click on AA - Install Android.
Turn off your phone.
Press and hold Volume+ Power and Ptt button until you get to the bootloader menu.
Select Fastboot mode.
Connect your USB cable to your phone, Look at your phone, and press Volume+ button 2 times when prompted to start. That's all. Sit back and relax for a couple of minutes.
The installation script will install your chosen Android version and reboot the phone when everything is done. After boot install Magisk25.
.
Udate:
I have created a new lk.img file to remove the 'Orange State' Warning during boot of Android.
The file is added to the installation scripts.
Hi,
I've just intalled SparkOS (the same file you show in the tutorial) on my WP17.
The default camera has been replaced and now I can't use the triple camera or infrared.
I was wondering if you knew how to install/flash the NightVision Camera_Oukitel WP17.zip back onto the phone. Or maybe where to put the files?
Best regards, picipi.
PS: keep on the great work!
.
No. Sorry, not yet. The problem is the drivers for the camera. The Android version your phone is shipped with has these drivers pre-installed. As I wrote before, if you flash GSI or other versions of android, these drivers are not included, and you will have problems with your camera.
This forum is aimed primarily at those who have had problems with their phone and need help getting their phone to a working condition for calling and normal daily operation. However the NightVision Camera can be partly fixt by installing the default camera app.
It's important for EVERYONE with Android 11 stock firmware, to extract a copy of the firmware as a backup, before flashing other GSI roms. And share a link here on the forum, so others can restore their phones to.
There are many ways to do this. Find a method that suits you best:
pull Stock Android Firmware - Google Search
Perhaps this one for Windows users:
How to use SP Flash tool to backup Mediatek firmware
Update: I suggest you use Wwr tool + SP flash tool for the dump instead of SP Flash tool alone as you can proceed without first having the scatter file and using MTK Droid Tools (which is now outdated
www.hovatek.com
PS..
When you extract you firmware. DO NOT copy the USERDATA partition!, this partition can hold up to 20-40 gigabits of your old useless user data, of you using your phone on a daily bases.
.
--- BlissOS Android 13 and lightning fast ---
This rom has the bare minimum of needed apps, no bloatware and lightning fast.
highly recommended and fit's the Oukitel WP17 spec perfectly.
Download the rom here:
BlissOSv16.0-arm64-bgN-slim-Unofficial
1. Extract Android 13 from the downloaded file to your desktop.
2. Rename the file to GSI.img
3. Download and extract AA - Install Android to your desktop
4. Move the GSI.img file to the install folder.
Enjoy ...
If you choose to go back to stock rom, and you have formatted the phone to flash GSI, is the precise partition deleted, and you end up with missing google key / Red txt on the top of your phone.
Here is the file you flash to get rid of that Red txt…
Code:
fastboot flash persist persist.img
_____________________________________________________________________________________
Update:
Some users reported it doesn't work for them.
For me it did the trick, but it doesn't work for everyone.
.
.
.....
Hey, thank you so much, got my WP17 working again but now I don't have IMEI and I'm getting a watermark saying "No google key and tee key" any ideas how to fix this ?
JustNabus said:
Hey, thank you so much, got my WP17 working again but now I don't have IMEI and I'm getting a watermark saying "No google key and tee key" any ideas how to fix this ?
Click to expand...
Click to collapse
.
The IMEI fix: https://forum.xda-developers.com/t/...rm64-a-b-treble-enabled.4504207/post-87571063
Working on a solution for the "No google key and tee key".
Don't forget to update the Android system for camera fix.
.
SwedishForenger said:
.
The IMEI fix: https://forum.xda-developers.com/t/...rm64-a-b-treble-enabled.4504207/post-87571063
Working on a solution for the "No google key and tee key".
Don't forget to update the Android system for camera fix.
.
Click to expand...
Click to collapse
I forgot to say that I don't have any backup on my IMEI and I've no idea where the box is. Is there any other way to get it ? I've sent an email to Oukitel but no answer so far
.
Yes. just copy and paste these numbers. Ore just scramble the numbers around.
IMEI 1: 35524555061532
IMEI 2: 35524555061573
If you don't want to use these IMEI numbers, you can just take the IMEI number under the battery from one of your old phones you already have lying around. it doesn't matter how old they are, even an old Nokia from 1990 works perfectly fine.
_______________________________________________________________________________________DisclaimerEditing or changing the serial number or IMEI of your device is illegal in some countries.
I take no responsibility for your actions. This is for educational purposes only.
.
To remove the Red txt "No google key and tee key".Some people have sent me a pm and say that flashing persist.img didn't work for them.
Try this instead:
Code:
adb devices
pm uninstall -k --user 0 com.mediatek.engineermode
Reboot the phone.
.
noob here, can you create a youtube video on how to install a custom rom to this phone?
dalelad said:
noob here, can you create a youtube video on how to install a custom rom to this phone?
Click to expand...
Click to collapse
.
It's not relay necessary.
There are only 4 small simple steps to perform, the Installer does everything else for you.
Oukitel WP17 [Root][GSI ARM64 A/B Treble-Enabled]
WP17 is a rugged phone with Infrared Night Vision Camera, Helio G95 8GB+128GB 6.78“FHD+ 90Hz 64MP Triple Camera+16MP Selfie 8300mAh Android 11 Global Version. Bought me a Oukitel WP17, but couldn't find much information about this phone. So...
forum.xda-developers.com
It's important for EVERYONE with Android 11 stock firmware, to extract a copy of the firmware as a backup, before flashing other GSI roms. And share a link here on the forum, so others can restore their phones to.
There are many ways to do this. Find a method that suits you best:
pull Stock Android Firmware - Google Search
.