Develop Bugs

OMNI ROM

Hye all,
i just open this thread to attract attention of any developers that may can maintain or compile a new type of AOSP - OMNI rom
Here the following forum for this OMNI rom
http://forum.xda-developers.com/forumdisplay.php?f=2601
Developers can submit theirs device specification to OMNI development forum > http://forum.xda-developers.com/forumdisplay.php?f=2604
it is nice to had fresh ROM to be compiled or been maintain for our wonder.. i had no knowledge in compiling ROM and i hope somebody could try make it real..
Maybe our sir @arsradu can take give a chance
Here some video that presenting this OMNI Rom
www.youtube.com/watch?v=BXlzJ4WVDKY
Thank You For reading

Wow the room looks great from the video , I hope that someone will support it for Wonder

Sadly I would need a hardware upgrade for that... I actually needed that for a very long time and didn't get the finances to do it and I can't seem to get any support from anyone else so far...so I can't make any promises for this ROM. It looks nice and it might turn out to be a great ROM but I won't make any promises about implementing it for Ancora because of the reasons mentioned above. If anyone else wants to do it, be my guest.

maybe we could gather some workgroup on that? but we need some people that had experience in changing the config.. it same goes with me, building a rom need high hardware requirement..if not it will took long time to build it..

dear sir @arco68
sir can you merge ancora device spesific into omni github please?
http://forum.xda-developers.com/showthread.php?t=2483720
http://forum.xda-developers.com/showthread.php?t=2483593
ı know you are very busy sir but ı want so much official omni rom and support for galaxy w
also there isnt any official rom(cm paranoid slimbean etc.) for galaxy w
maybe this will be first who knows??
than you very much sir for your huge work on our device :good:
best regards

hack4er said:
dear sir @arco68
sir can you merge ancora device spesific into omni github please?
http://forum.xda-developers.com/showthread.php?t=2483720
http://forum.xda-developers.com/showthread.php?t=2483593
ı know you are very busy sir but ı want so much official omni rom and support for galaxy w
also there isnt any official rom(cm paranoid slimbean etc.) for galaxy w
maybe this will be first who knows??
than you very much sir for your huge work on our device :good:
best regards
Click to expand...
Click to collapse
There is dude. LiquidSmooth was official. AOIP was official. But there wont be many because this is a minority phone for mainstream developers. We must truly thank the devs like educk to even have spent so much time for us to make LS and Carbon. Not to mention the dual boot kernel.
Sent from my MB860 using Tapatalk 2

hack4er said:
dear sir @arco68
sir can you merge ancora device spesific into omni github please?
http://forum.xda-developers.com/showthread.php?t=2483720
http://forum.xda-developers.com/showthread.php?t=2483593
ı know you are very busy sir but ı want so much official omni rom and support for galaxy w
also there isnt any official rom(cm paranoid slimbean etc.) for galaxy w
maybe this will be first who knows??
than you very much sir for your huge work on our device :good:
best regards
Click to expand...
Click to collapse
Would be so awesome to get official OMNI Rom support

is there any good news about omni @hadidjapri?
sorry if ı disturb you
thanx again
with my best regards :good:

I hear, hadidjapri working on it

Any news about Omnirom for our wonder

ı think we have chance for official omni support because we are using legacy camera libs and we need that changes in framework/native
http://review.cyanogenmod.org/#/c/34376/
luckily omni merged that commit into their framework/native repo 3 month ago
https://github.com/omnirom/android_frameworks_native/commit/6233f1e7dcdc087fd4e4aaf4d8626ad5303fb9c8
also we have official twrp recovery for omni(omni requires twrp recovery configuration for porting) http://docs.omnirom.org/Porting_Omni_To_Your_Device
http://forum.xda-developers.com/showthread.php?t=2046035
firstly we must build as unofficial and then we must merge our device,vendor and kernel tree into official omni git repository http://forum.xda-developers.com/showthread.php?t=2483720
we only need dev or devs for maintaining
@Madridii and @hadidjapri bro you are experienced for that jobs maybe you can work together and you can be our official manitainer fo official omni support
thanx
regards

sir mordred said:
ı think we have chance for official omni support because we are using legacy camera libs and we need that changes in framework/native
http://review.cyanogenmod.org/#/c/34376/
luckily omni merged that commit into their framework/native repo 3 month ago
https://github.com/omnirom/android_frameworks_native/commit/6233f1e7dcdc087fd4e4aaf4d8626ad5303fb9c8
also we have official twrp recovery for omni(omni requires twrp recovery configuration for porting) http://docs.omnirom.org/Porting_Omni_To_Your_Device
http://forum.xda-developers.com/showthread.php?t=2046035
firstly we must build as unofficial and then we must merge our device,vendor and kernel tree into official omni git repository http://forum.xda-developers.com/showthread.php?t=2483720
we only need dev or devs for maintaining
@Madridii and @hadidjapri bro you are experienced for that jobs maybe you can work together and you can be our official manitainer fo official omni support
thanx
regards
Click to expand...
Click to collapse
Hello!
Also We need this commit too in frameworks/native :
MemoryHeapBase
before that I am not a developer as I said before so sorry , we are just trying with hadi, arsradu and all of my friends to keep this phone up to date with CM and google updates(example : DarkCM is CM11 with more option to make it different), I think there is someone who tried to build it but it didnt boot!
and in my case, I am so busy with University, If I have a free time I will discuss with my friends.

[ open source code]links for lenovo A3000 developers

PLEASE INFORM TO DEVELOPERS WHO ARE INTERESTED TO DEVELOP CUSTOM ROM FOR OUR TAB:
:laugh:
ATLAST WE GOT OUR OWN FORUM AND ITS TIME TO UNITE AND INVITE DEVELOPERS TO OUR FORUM AND MAKE OUR TAB WITH CUSTOM ROMS :good::good:
open source code useful for developers to build new custom roms from scratch ..it will be good to inform to developers that our tab got sources ..so that it can be used for custom roms THE LINK IS GIVEN BELOW
http://mobilesupport.lenovo.com/us/en/products/a3000_tablet
any developers have the idea

Was gonna post that I thought it might of been pulled then found it in downloads section. Wish I could program though
Sent from my GT-I9100 using XDA Premium HD app

Build an ROM from source code for lenovo a3000
how to make rom from source code?

This is what we need, developers! It would be epic if we could get together and make a good ROM because Lenovo's ROM is terrible! We need to grab the attention of big custom ROMs like CyanogenMod and Pac-ROM.
I really hope we can make something for this tablet!

zipperklooder said:
This is what we need, developers! It would be epic if we could get together and make a good ROM because Lenovo's ROM is terrible! We need to grab the attention of big custom ROMs like CyanogenMod and Pac-ROM.
I really hope we can make something for this tablet!
Click to expand...
Click to collapse
Please read this.

Miui 7 is coming soon for lenovo a3000h

HERCULES said:
Miui 7 is coming soon for lenovo a3000h
Click to expand...
Click to collapse
Great news! Please write something more about this ....

Trying to build OMNI 4.4.4

I am trying to build OMNI 4.4.4 for H60-L02. Right now I have managed to see the bootanimation of omni and then I have a bootloop. These are the logs for anyone who are willing to help
Logcat : http://pastebin.com/RT5x5EjJ
Dmesg : http://pastebin.com/PSzj9XJR
So, let's try to build roms for honor 6 !!! Any help is welcome ....

I don't have the skills but I'm willing to support the initiative as far as I can!

Sounds like the same issue i had, check google-cert folder that you have it and also build the files so that you edit default storage path. It was a few months ago i tried to build my own and i ended up with similair problem and it was related to missing cert and wrong storage path.
Im no expert, its just a hobby of mine so i might be wrong

Is Cyanogenmod avialable to Honor 6
Is Cm 11 available to Honor 6

Kanth's said:
Is Cm 11 available to Honor 6
Click to expand...
Click to collapse
No Cyanogenmod available yet, we all wait for.

HTC HD2 has CM12 already ^^

spanorg said:
I am trying to build OMNI 4.4.4 for H60-L02. Right now I have managed to see the bootanimation of omni and then I have a bootloop. These are the logs for anyone who are willing to help
Logcat : http://pastebin.com/RT5x5EjJ
Dmesg : http://pastebin.com/PSzj9XJR
So, let's try to build roms for honor 6 !!! Any help is welcome ....
Click to expand...
Click to collapse
@spanorg, what do you think of the information of codeworkx?
Daniel Hillenbrand a.k.a. codeworkx is a member of Team CM and TeamHacksung, is a legend

panamera2011 said:
@spanorg, what do you think of the information of codeworkx?
Click to expand...
Click to collapse
Go! go! go!

panamera2011 said:
@spanorg, what do you think of the information of codeworkx?
Daniel Hillenbrand a.k.a. codeworkx is a member of Team CM and TeamHacksung, is a legend
Click to expand...
Click to collapse
I have in my hands this info from the first hour I took the phone. I have built a whole device tree not only the partitions. Anyway, I appreciate any help. The big problem is that some sources of Huawei are not given. Especially for the kirin920 soc. That's why development is very difficult. Anyway, I am still trying for building... For any news, I will immediately tell you.

spanorg said:
I have in my hands this info from the first hour I took the phone. I have built a whole device tree not only the partitions. Anyway, I appreciate any help. The big problem is that some sources of Huawei are not given. Especially for the kirin920 soc. That's why development is very difficult. Anyway, I am still trying for building... For any news, I will immediately tell you.
Click to expand...
Click to collapse
Ok, thanks for try to build a CM :good:
Let's hope so!

spanorg said:
I have in my hands this info from the first hour I took the phone. I have built a whole device tree not only the partitions. Anyway, I appreciate any help. The big problem is that some sources of Huawei are not given. Especially for the kirin920 soc. That's why development is very difficult. Anyway, I am still trying for building... For any news, I will immediately tell you.
Click to expand...
Click to collapse
I've no doubt about this. @spanorg please help codeworkx (this IP the thread: http://forum.xda-developers.com/showthread.php?p=58283578).
He's searching for a tester whit competences. I think your help could be more precious now, you are a recognized developer and you can do more than a tester. you can collaborate whit him, and finally became our leader.
(we can ask for donations or other, if possible, to support your works)
Thanks.

spanorg said:
I have in my hands this info from the first hour I took the phone. I have built a whole device tree not only the partitions. Anyway, I appreciate any help. The big problem is that some sources of Huawei are not given. Especially for the kirin920 soc. That's why development is very difficult. Anyway, I am still trying for building... For any news, I will immediately tell you.
Click to expand...
Click to collapse
What do you need?
Here's a kernel for inline building:
https://github.com/codeworkx/android_kernel_huawei_h60
In original sources, have at look at drivers/vendor/hisi.
There are some "acore" folders with android userspace stuff. Doesn't belong there, but it's there.
I've seen some kirin stuff for bionic.
For everything else you have to use their libraries and make them working with aosp.
I assume this requires a ****load of bad hacks.

codeworkx said:
What do you need?
Here's a kernel for inline building:
https://github.com/codeworkx/android_kernel_huawei_h60
In original sources, have at look at drivers/vendor/hisi.
There are some "acore" folders with android userspace stuff. Doesn't belong there, but it's there.
I've seen some kirin stuff for bionic.
For everything else you have to use their libraries and make them working with aosp.
I assume this requires a ****load of bad hacks.
Click to expand...
Click to collapse
Hi codeworkx, I tried to compile cyanogenmod11 with your reposity, but I haven't not file local_manifests.xml .. you can send me right local_manifests.xml ?

Steve Giordano said:
Hi codeworkx, I tried to compile cyanogenmod11 with your reposity, but I haven't not file local_manifests.xml .. you can send me right local_manifests.xml ?
Click to expand...
Click to collapse
http://forum.xda-developers.com/honor-6/orig-development/cyanogenmod-dev-thread-t3008138
please don't build if you don't know what you're doing.
This will not boot into android and requires a ton of work.

codeworkx said:
What do you need?
Here's a kernel for inline building:
https://github.com/codeworkx/android_kernel_huawei_h60
In original sources, have at look at drivers/vendor/hisi.
There are some "acore" folders with android userspace stuff. Doesn't belong there, but it's there.
I've seen some kirin stuff for bionic.
For everything else you have to use their libraries and make them working with aosp.
I assume this requires a ****load of bad hacks.
Click to expand...
Click to collapse
Do you have a link for the kirin stuff for bionic?

spanorg said:
Do you have a link for the kirin stuff for bionic?
Click to expand...
Click to collapse
sorry, my fault.
just stuff for the bootloader.
vendor/hisi/modem/drv/acore/bootable/bootloader/legacy/arch_balongv7r2

Is this project still active? Just curious.

Can we fix Cyanogenmod12(cm12) bugs with the help of cyanogenmod11(cm11)?

I have been practicing c,c++,java,php,html since 5 years now i am making android apps its been 5 months doing that.I also have been rooting android devices and flashing custom roms since 2 years now I want to get my hands into porting Custom Roms for various devices. Since I dont know anything so I just want to know about how can I do this. Well making a complete rom will be not possible way to learn completely at once this is what I think. But now I am having two custom roms Cyanogenmod11 and Cyanogenmod12 for a low end device named Samsung galaxy fame gt-s6812 somebody has ported these roms for this device.Now, cm11 is working really very fine but cm12 having lot of bugs : 1.Microphone not working 2.Speaker not working 3.Unkown Baseband and IMEI number etc. I just thought that by just replacing some of the things like folders or files from cm11 to cm12 will work for this. Because many people are porting roms by just copying folders from one into another.
If this can be happened then which folders will get me rid of these bugs. Please help me out Links , explanations, videos anything which can give knowledge about all these stuffs. Thank you

Try to send @wulsic or @corsicanu a message, those two are main developers for out Galaxy Fame section.

dushyant30suthar said:
I have been practicing c,c++,java,php,html since 5 years now i am making android apps its been 5 months doing that.I also have been rooting android devices and flashing custom roms since 2 years now I want to get my hands into porting Custom Roms for various devices.
Click to expand...
Click to collapse
Well, its not as easy as copy and pasting because in the cm12.1 repository there are made some changes which removes compatibility with jellybean 4.1 based binaries so we are using patches to add back that compatibility and also for telephony etc. So we are on the way to get a good working cm12.1 the build with which I am busy with should work much better as the cm12 alpha0.1 as the dpi,sound,performance,security,telephony, microphone, video playback should be fixed. The only problem I still have to find out is why the rom is stuck at starting apps. If you want you can help to get it fully working as I dont own the device and the fame from corsicanu is still broken I believe. If you want to start compiling cm12.1 for the fame then you can look in the general section there is a compiling tutorial but beware I must edit it/ make a new one for cm12.1 so if you want more help or info just contact me. I am not a pro with all these things but I can give you the basics :good:
Sent from my LG-D802 using Tapatalk

@dushyant30suthar
appreciate u want to help
u can follow instruction to download cm12.1 from guide made by wulsic
change repo init to. ... https://github.com/cyanogenmod/android (at that link u can find the guide to download the source code)
u also can check the device tree https://github.com/wulsic/android_device_samsung_nevisp
https://github.com/wulsic/android_vendor_samsung_nevisp
kernel : https://github.com/wulsic/Hyper_CM11
and the patches from pawitp who working cm11-12.1 for broadcom chipset (grand duos) : https://gist.github.com/pawitp/88a1d4514a0734c866c7 ( try to change some line to work with our hardware phone)
good luck :*
*i am stuck at building the rom with external hdd,it will change all the file (git status modfied)

I hope that the developers could fix a lot of bugs in cm12.1, faizauthar12 and wulsic are doing a great job!

There's already a good-working ROM out (at least for S6810):
http://forum.xda-developers.com/showthread.php?p=63426739

faizauthar12 said:
@dushyant30suthar
appreciate u want to help
u can follow instruction to download cm12.1 from guide made by wulsic
change repo init to. ... https://github.com/cyanogenmod/android (at that link u can find the guide to download the source code)
u also can check the device tree https://github.com/wulsic/android_device_samsung_nevisp
https://github.com/wulsic/android_vendor_samsung_nevisp
kernel : https://github.com/wulsic/Hyper_CM11
and the patches from pawitp who working cm11-12.1 for broadcom chipset (grand duos) : https://gist.github.com/pawitp/88a1d4514a0734c866c7 ( try to change some line to work with our hardware phone)
good luck :*
*i am stuck at building the rom with external hdd,it will change all the file (git status modfied)
Click to expand...
Click to collapse
Do anyone have cm12.1, Cm13 cm14 for Samsung Galaxy fame Gt-s 6812 please give me a link :good:

Abu Swalih 1 said:
Do anyone have cm12.1, Cm13 cm14 for Samsung Galaxy fame Gt-s 6812 please give me a link :good:
Click to expand...
Click to collapse
Did you check the link for CM12.1 in the post above yours?

:confused
BenjyTec said:
Did you check the link for CM12.1 in the post above yours?
Click to expand...
Click to collapse
Nop but I don't see name Samsung Galaxy fame Gt-s 6812 show me link please

I'm using cyanogenmod 12.1 on my samsung galaxy fame everything working only SIM card no when I was instaling that say SIM card no detected bat I have it inserted so I don't know what do?

[Discussion]Lineage OS for Samsung Galaxy J2

Development is going on here :
https://www.github.com/MissionJ2 <-- Contributions are always welcomed here
and https://www.github.com/TeamExyLords<-- The won't accept any contributions untill you personally know @Albe96 and he thinks that you are a good dev mainly [Recognised Contributor]

: D?f
lzzy12 said:
I want to build Lineage OS (or any other android version) for my galaxy J2 (J200G varient) but the only problem is the vendor tree which I don't know how to build. If any experienced developer can guide me to build the same (vendor tree) then he will get the blessings of those who are still waiting for feeling the stock Android on their J2 ...
Please Devs help me.. I have built only 3 roms yet and that too with all the trees i.e the kernel, vendor and the device trees already available... I can't even find a good document or a video tutorial on youtube to build vendor tree...
But if there is any then please point me to it
Click to expand...
Click to collapse

https://github.com/chaubeyprateek/android_vendor_samsung_j2lte/archive/master.zip
Is it what you are looking for????????

ad. said:
https://github.com/chaubeyprateek/android_vendor_samsung_j2lte/archive/master.zip
Is it what you are looking for????????
Click to expand...
Click to collapse
Oh!! many many thanks for that!!
Hoping a CM 12.1 soon for my j2lte
But still is there any document which promises to teach us building vendor tree??

Eon1234zaza said:
: Df
Click to expand...
Click to collapse
Hey Dont laugh at me like that:crying::crying::crying:
Please help if you can:angel::angel:

lzzy12 said:
Oh!! many many thanks for that!!
Hoping a CM 12.1 soon for my j2lte
But still is there any document which promises to teach us building vendor tree??
Click to expand...
Click to collapse
I haven't found any such document till now......

Custom Rom J2
Will create rom for j2 model j200m?

Maybe this will help
lzzy12 said:
I want to build Lineage OS (or any other android version) for my galaxy J2 (J200G varient) but the only problem is the vendor tree which I don't know how to build. If any experienced developer can guide me to build the same (vendor tree) then he will get the blessings of those who are still waiting for feeling the stock Android on their J2 ...
Please Devs help me.. I have built only 3 roms yet and that too with all the trees i.e the kernel, vendor and the device trees already available... I can't even find a good document or a video tutorial on youtube to build vendor tree...
But if there is any then please point me to it
Click to expand...
Click to collapse
http://forum.xda-developers.com/chef-central/android/guide-android-rom-development-t2814763?

Is a cm rom coming bro?
Thnx if:good:

[ROM][TRIAL] CyanogenMod/LineageOS for J2lte
https://forum.xda-developers.com/android/development/rom-cyanogenmod-lineageos-j2lte-t3575821

https://chat.whatsapp.com/Bm90GQ8NPyyFwWeDbEwbBd
PLS JOIN OUR J2 WHATSAPP GROUP

Sources link please.
Can you please provide me all of the sources that you are using to make this ROM. Links to the resources you have been using till now would be good. I am also attempting to make the LineageOS for J200H 3G variant. That way we can test each others ideas out and make a stable LinageOS ROM for J200H 3G variant. Hope you will reply to this message according to the will you have. Thanks either way in advance.
TO
 @izzy12 and all the other devs who are interested in making the ROM or by bug testing the ROM after initial release.

Hey @lzzy12 this is the only documentation i found on net and don't know if it will work or not but you can give a try
https://techstarspace.wordpress.com...extracting-proprietary-files-from-the-device/

Help needed.
@izzy12 , Do you have the source file of j200h? Since you are trying to make a ROM from scratch (According to your methods) can you please provide it to me. I was porting the ROM from LTE to 3G (I was successful)(Yeah i made some changes to convert it) But got into problem. I think your files may help me figure it out. Can you please help me. (If you are trying to make ROM from source file). You may provide me with the link file. Hope you will reply to me.

MobNerd said:
@izzy12 , Do you have the source file of j200h? Since you are trying to make a ROM from scratch (According to your methods) can you please provide it to me. I was porting the ROM from LTE to 3G (I was successful)(Yeah i made some changes to convert it) But got into problem. I think your files may help me figure it out. Can you please help me. (If you are trying to make ROM from source file). You may provide me with the link file. Hope you will reply to me.
Click to expand...
Click to collapse
Here is the evice tree
https://github.com/chaubeyprateek/android_device_samusng_j2lte
Here is the vendor tree: https://github.com/chaubeyprateek/android_vendor_samsung_j2lte/
And here is the kernel sources :https://github.com/TeamWin/android_kernel_samsung_j2lte

I am so sorry to inform you that my built of boot.img crashed (It was working but i tried rooting it). It won't even show the Boot logo now. It only displays Samsung Galaxy J2(Startup screen). It is currently hooked in restart loop. So it will take more time to figure this out. Hope you will have patience.
I am currently working on resolving this issue.
.
If any one knows why it is occurring or have been in the same situation please reply. It may help me solve the issue faster. Other files has been already modified, almost 65% work is done....

MobNerd said:
I am so sorry to inform you that my built of boot.img crashed (It was working but i tried rooting it). It won't even show the Boot logo now. It only displays Samsung Galaxy J2(Startup screen). It is currently hooked in restart loop. So it will take more time to figure this out. Hope you will have patience.
I am currently working on resolving this issue.
.
If any one knows why it is occurring or have been in the same situation please reply. It may help me solve the issue faster. Other files has been already modified, almost 65% work is done....
Click to expand...
Click to collapse
Sorry I can't help you. But btw which rom are you porting???

MobNerd said:
Can you please provide me all of the sources that you are using to make this ROM. Links to the resources you have been using till now would be good. I am also attempting to make the LineageOS for J200H 3G variant. That way we can test each others ideas out and make a stable LinageOS ROM for J200H 3G variant. Hope you will reply to this message according to the will you have. Thanks either way in advance.
TO
@izzy12 and all the other devs who are interested in making the ROM or by bug testing the ROM after initial release.
Click to expand...
Click to collapse
ad. said:
Sorry I can't help you. But btw which rom are you porting???
Click to expand...
Click to collapse
Actually i am reverse porting from J2LTE to J2 3G (S7 Skin pack ROM)..

MobNerd said:
I am so sorry to inform you that my built of boot.img crashed (It was working but i tried rooting it). It won't even show the Boot logo now. It only displays Samsung Galaxy J2(Startup screen). It is currently hooked in restart loop. So it will take more time to figure this out. Hope you will have patience.
I am currently working on resolving this issue.
.
If any one knows why it is occurring or have been in the same situation please reply. It may help me solve the issue faster. Other files has been already modified, almost 65% work is done....
Click to expand...
Click to collapse
Bro please do it fast

@MobNerd where is the original rom that you are porting??? and how far has your work reached???