hello
i really need your help
i ve bought RM-CT0007
a rk3066
40nm
4x1,2ghz
android 4.4.4
i found ktu84q for her mcu that's possible ?
the bluetooth doesn't function
caraudio30000 said:
hello
i really need your help
i ve bought RM-CT0007
a rk3066
40nm
4x1,2ghz
android 4.4.4
i found ktu84q for her mcu that's possible ?
the bluetooth doesn't function
Click to expand...
Click to collapse
ok i understand , ktu84p is just the name of android version 4.4.4.
so how can i found the mcu ?
i ad i can to root them
caraudio30000 said:
so how can i found the mcu ?
Click to expand...
Click to collapse
It's at the very top of this forum's main page:
This forum is for questions about MTCB Android Headunits. Check Settings->About tablet -> MCU Version. If it starts with "MTCB-" you are in the correct place.
Click to expand...
Click to collapse
this is a copy of the system
anyone ?
I can't see mtcb anywhere on that. I don't think the mtcb forums or firmware are for you
Sent from my SM-G920F using Tapatalk
so i must to post in different section ?
I'd think so. Try the basic Android Auto section
Sent from my SM-G920F using Tapatalk
ok
i will try
thank you
maybe a modo can to changed ?
i can't believe nobody can't help me ....
Why? As said it doesn't look like you have an MTCB head unit. Try asking in the Android Auto general forum rather than the MTCB one
Sent from my SM-G920F using Tapatalk
Please can you somebody test firmware
http://forum.xda-developers.com/showpost.php?p=58249825&postcount=7614
on device RM-CT0007 7.0inch Car GPS 2DIN
i find big problem with bluetooth support like that is no kernel driver for it
Latest firmware from april 2016 , but still same problem with bluetooth and ELM327 adapter
https://yadi.sk/d/IR_V2ROYqkmFN
Related
WARNING:
I have had few customers already with bricked Head units for flashing the wrong ROM.
DO NOT FLASH ROM and MCU from mtcD on mtcB or vice versa.
YOU WILL END UP WITH NO RECOVERY, NO BOOT, NO WARRANTY!
\THE ONLY FIX NOW:
mtcD : NEW MOTHERBOARD with RK3188
mtcB: NEW RK3188 SoM
I accidentally installed MTCD on a MTCB device and I managed to fix it.
Sent from my SM-G935F using XDA-Developers mobile app
Can you explain how did you do?
Enviado desde mi D6603 mediante Tapatalk
I've been using MTCB roms (Malaysk) on my Audi TT RK3188 headunit for over a year. Last time I was in the system info screen I noticed it lists the unit as MTCD. Has anyone ever heard of this? The MTCB roms have been working fine..
ikerg said:
Can you explain how did you do?
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
I connected my HU to the laptop with adb. And I used Androidtool Marsboard 2.1 to install MTCB image
Sent from my SM-G935F using XDA-Developers mobile app
So in case bricking a mtcd with Androidtool you mentioned can be unbricked as well...but should be adbon command active previously?
There is a command to activate adb on USB ....but if it is bricked I don't know of it could be connected.
Android TV sticks based on rk3188 have some pin shortcut procedure in order to force to enter into recovery.
Enviado desde mi D6603 mediante Tapatalk
ikerg said:
So in case bricking a mtcd with Androidtool you mentioned can be unbricked as well...but should be adbon command active previously?
There is a command to activate adb on USB ....but if it is bricked I don't know of it could be connected.
Android TV sticks based on rk3188 have some pin shortcut procedure in order to force to enter into recovery.
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
When you connect to Windows you will see if it sees your device. Then install USB driver and it should work
Sent from my SM-G935F using XDA-Developers mobile app
What about Launchers?
Can we install kitkat launchers on lollipop units? I'm really tired of the stock JY launcher and want to change to KL D launcher but can't find lollipop specific ones.
knor27 said:
I connected my HU to the laptop with adb. And I used Androidtool Marsboard 2.1 to install MTCB image
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
And how did you connect you unit to your laptop?
The unit has only USB A connector and the laptop also only USB A
An USB A - A cable is very rare/seldom and honest i don't know if this would work because both devices give 5 volt power..
I also have a bricked mtcb device with mtcd software installed on it, i hope i can fix this using my laptop
Hope you can explain to me how you connected your laptop the unit.....
knor27 said:
I connected my HU to the laptop with adb. And I used Androidtool Marsboard 2.1 to install MTCB image
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Hi @knor27,
Can you explain to me how you did this?
I got the tools and cable, but which file did you use to recvoer, if i read the instructions of androidtool it is only possible to make a dump and to flash it when you have the dump files..
I have no backup dump file, i can download (and have) an (original) rom (which 100% works) but this only contains and update.img and an mcu.img file
The tool does not have any option to use these files to flash the unit.
I hope you can help, have here a bricked unit which i cannot use anymore......
I have contacted the erisin support and they upload here (Recovery) the recovery firmware. I don't now if the devices is mtcb or mtcd or if it is compatible with your ROM.I don't now how to access the recovery. Can you please tell me if it would be compatible whit Rom and if it would be a good choice for me(I have only 1 din space)?
The only other post on this forum on this head unit is: Other post
Official page model: here
Thank you
Doesn't look like the MCU type is MTCB or MTCD. If it isn't none of these roms will work.
Is it a good choice for you? Only you can answer that.
Sent from my SM-G920F using Tapatalk
gk66 said:
Doesn't look like the MCU type is MTCB or MTCD. If it isn't none of these roms will work.
Is it a good choice for you? Only you can answer that.
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
How can i find out what type is it?
It says it under MCU in the about tablet section of the settings.
If you've bought it look there. If you haven't bought it zoom into the settings picture on your link
Sent from my SM-G920F using Tapatalk
gk66 said:
It says it under MCU in the about tablet section of the settings.
If you've bought it look there. If you haven't bought it zoom into the settings picture on your link
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
It says MCU LM-.... the rest is not so clear from the picture :/
The is not MTCD or MTCB. Try Android head unit section for help
Sent from my SM-G920F using Tapatalk
gk66 said:
The is not MTCD or MTCB. Try Android head unit section for help
Sent from my SM-G920F using Tapatalk
Click to expand...
Click to collapse
ok: this is the information:
system version number: common_V1.00.00056.53.1
kernel version number: PX3_V2.00.0020.00.00
MCU version number: LM-AND841-7090V.21
Hello.
Did anyone helped with your problem?
My unit doesn't have the touch function any more and displays the message - "Unfortunatelly, the MCU has stopped"). I can't go to Factory reset and I need a MCU firmware recovery to mount it on a SD .
Thank you
this is version 2.43 for MTCD-KSP march/2017
I know it is difficult to find so i am sharing
Nomader0 said:
this is version 2.43_1 for MTCD-KSP march/2017
I know it is difficult to find so i am sharing
Click to expand...
Click to collapse
Is this real wow m8 do you have a screenshots?
Verstuurd vanaf mijn A0001 met Tapatalk
i installed it yesterday.. haven't noticed a difference. i had 1.99 before. i don't have a changelog
If anyone has 2.44 it would be wonderful if he shared
MTCD-KSP firmware
I had 2.09 and updated with this one. No problems so far. If there is 2.44 please share guys.
Sent from my iPhone using Tapatalk
Everyone should ask the seller for the new firmware, that is what I did.
Yes, but not always the seller is ready to help. Mine for example is trying to convince me that, if I update the MCU my device will brick. That's why i should not install updates.
Just tell him that you have Wi-Fi problems
The share is appreciated - will check it out from 1.99...primary user has been complaining about Bluetooth.
Side note - perhaps indicate "MCU" firmware in the title?
Found KSP MCU Update 2.48 on a Yadi.sk, testing it now.
So far so good.
Found the link (with many HU not just KSP) in this thread:
https://forum.xda-developers.com/showpost.php?p=72382560&postcount=3113
(yadi link here: https://yadi.sk/d/umCvHqCDzHccr
Best
that is wonderful!!!!
did you try it? everything ok?
I'm using it with no problems.
Sent from my iPhone using Tapatalk
techo91 said:
I'm using it with no problems.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
me too
Can any one share android firmware for KSP unit ?
MTCD_KSP_V2.48d
hi guys ,
i want to share with the latest mcu for mtcd_ksp. Already tested on my device.
have a fun
https://yadi.sk/d/yNTWOdaH3Kf6Nr"]https://yadi.sk/d/yNTWOdaH3Kf6Nr
youssefelhnaoui said:
hi guys ,
i want to share with the latest mcu for mtcd_ksp. Already tested on my device.
have a fun
https://yadi.sk/d/yNTWOdaH3Kf6Nr"]https://yadi.sk/d/yNTWOdaH3Kf6Nr
Click to expand...
Click to collapse
What is version number m8 could you post a screenshot with it please?
And did you noticed any improvements?
Verstuurd vanaf mijn A0001 met Tapatalk
thanks mate..
but version 2.48d is already posted in the previous page
friedricebob said:
Found KSP MCU Update 2.48 on a Yadi.sk, testing it now.
So far so good.
Found the link (with many HU not just KSP) in this thread:
https://forum.xda-developers.com/showpost.php?p=72382560&postcount=3113
(yadi link here: https://yadi.sk/d/umCvHqCDzHccr
Best
Click to expand...
Click to collapse
This appears to solve a bluetooth echo issue.
mcu question
Nomader0 said:
this is version 2.43 for MTCD-KSP march/2017
I know it is difficult to find so i am sharing
Click to expand...
Click to collapse
i've had 2.43 ver with px3. wifi bt worked at all. now i upgraded to px5. wifi and bt is not working. i've changed also the mcu to 2.48. nothing to do. any advices? thanks in advance.
It looks like as the upgraded units got different issues.
Mine is an LM unit PX3 upgraded to PX5 an auto sleep not working. Tried diefferent mcu´s without success.
Hello,
is there any Custom Rom for the Android 8 Isudar H53.
It seem it ha sthe SC9853i o Board.
Thanks
Is it an MTCx or something else.
BC01 said:
Hello,
is there any Custom Rom for the Android 8 Isudar H53.
It seem it ha sthe SC9853i o Board.
Thanks
Click to expand...
Click to collapse
Or any root option is also would be useful.
Hello
I have a TCL 49P3cf running android 4.4 now.
I need to update it in any android version +5.
The TV update checking didn't give me anything same as the TCL website.
There is anything you can help me with?
ariacat said:
Hello
I have a TCL 49P3cf running android 4.4 now.
I need to update it in any android version +5.
The TV update checking didn't give me anything same as the TCL website.
There is anything you can help me with?
Click to expand...
Click to collapse
Post your TV firmware installed.
stasiof said:
Post your TV firmware installed.
Click to expand...
Click to collapse
Currect Version is: V8-T56FT07-LF1V036
ariacat said:
Currect Version is: V8-T56FT07-LF1V036
Click to expand...
Click to collapse
V042....
http://as-update.cedock.com/apps/resource2/V8T56FT07/V8-T56FT07-LF1V042/FOTA-OTA/V8-T56FT07-LF1V042.zip
build.date=Jun 10 2019
stasiof said:
V042....
http://as-update.cedock.com/apps/resource2/V8T56FT07/V8-T56FT07-LF1V042/FOTA-OTA/V8-T56FT07-LF1V042.zip
June 2014
Click to expand...
Click to collapse
thanks. and where can I find the updating guide?
ariacat said:
thanks. and where can I find the updating guide?
Click to expand...
Click to collapse
This is OTA update,so maybe something like this:
https://tclnordic.zendesk.com/hc/en-us/articles/360012916240-Perform-a-local-update-TCL-Smart-TV-3
Btw, read in your Manual.
Edit:
Don't unzip file.....
must be copied to USB FAT32 as you download.
Basic update....
1. Press Settings
2. Go to Option
3. Go to Software update
4. Go to USB Upgrade
5. The software will upgrade to the TV
stasiof said:
This is OTA update,so maybe something like this:
https://tclnordic.zendesk.com/hc/en-us/articles/360012916240-Perform-a-local-update-TCL-Smart-TV-3
Btw, read in your Manual.
Edit:
Don't unzip file.....
must be copied to USB FAT32 as you download.
Basic update....
1. Press Settings
2. Go to Option
3. Go to Software update
4. Go to USB Upgrade
5. The software will upgrade to the TV
Click to expand...
Click to collapse
note. Shoud connect to USB/Services Port
Thanks. it's working and install. but I have 2 more problem.
in my TV manu I never have Home and Video Section. just TV and App showed. after I update for some min I have them, but then they are gone again.
the 2nd problem is the android version. as the TV running on 4.4, I have several problem with apps. is the any way to update the android version?
ariacat said:
note. Shoud connect to USB/Services Port
Thanks. it's working and install. but I have 2 more problem.
in my TV manu I never have Home and Video Section. just TV and App showed. after I update for some min I have them, but then they are gone again.
the 2nd problem is the android version. as the TV running on 4.4, I have several problem with apps. is the any way to update the android version?
Click to expand...
Click to collapse
First....some your configuration or setting maybe doing this.
If you don't have many apps, do factory reset and see again.
Second....Android is in firmware version, if you know anybody with Android 5?
I found V042 with Android 4.4.3, maybe can help me if in your TV now is
stated full version, as (sample).... V8-T56FT07-LF1V042.00xxxx
stasiof said:
First....some your configuration or setting maybe doing this.
If you don't have many apps, do factory reset and see again.
Second....Android is in firmware version, if you know anybody with Android 5?
I found V042 with Android 4.4.3, maybe can help me if in your TV now is
stated full version, as (sample).... V8-T56FT07-LF1V042.00xxxx
Click to expand...
Click to collapse
the full version I found in the software update section is V8-T56FT07-LF1V042.
Shall I check somewhere else?
ariacat said:
the full version I found in the software update section is V8-T56FT07-LF1V042.
Shall I check somewhere else?
Click to expand...
Click to collapse
No, it's ok.
I beleive you have latest version for this TV.
stasiof said:
No, it's ok.
I beleive you have latest version for this TV.
[/ALINTI]
Thank you
Click to expand...
Click to collapse
stasiof said:
V042....
http://as-update.cedock.com/apps/resource2/V8T56FT07/V8-T56FT07-LF1V042/FOTA-OTA/V8-T56FT07-LF1V042.zip
build.date=Jun 10 2019
Click to expand...
Click to collapse
sir am leo
i have a tcl tv model no 49p3cfs , it was struck on logo , we need software for this V8-T56FT07-LF1V020 PLEASE HELP ME SIR
leokingsly said:
sir am leo
i have a tcl tv model no 49p3cfs , it was struck on logo , we need software for this V8-T56FT07-LF1V020 PLEASE HELP ME SIR
Click to expand...
Click to collapse
Well, try this...
Copy V042.zip on USB, insert in your TV.
Power Off TV, press and hold power button ,then On TV, once update start release power button.
Also, search in forum other option.
stasiof said:
Well, try this...
Copy V042.zip on USB, insert in your TV.
Power Off TV, press and hold power button ,then On TV, once update start release power button.
Also, search in forum other option.
Click to expand...
Click to collapse
sir v042.zip link cont open will you please give me the link
thankyou
the tv show (no available updatepackeg, system update stoped .)
leokingsly said:
sir v042.zip link cont open will you please give me the link
thankyou
Click to expand...
Click to collapse
Nothing to OPEN....copy ZIP file complete to USB.
If got problem try another USB FAT32 or TV USB input.
Bonjour,
Quelqu'un aurait un lien actif de ce firmware, d'avance merci.
Manu
stasiof said:
V042....
http://as-update.cedock.com/apps/resource2/V8T56FT07/V8-T56FT07-LF1V042/FOTA-OTA/V8-T56FT07-LF1V042.zip
build.date=Jun 10 2019
Click to expand...
Click to collapse
hi dear
i can't download this file
error for me
please help me
thank you
moen7000 said:
hi dear
i can't download this file
error for me
please help me
thank you
Click to expand...
Click to collapse
TCL closed server.......sorry.