Develop Bugs

Constant Rebooting Issue

Hey I've just received my galaxy tab pro 8.4 and rooted it however now the tab stops responding and reboots itself almost every 5 minutes of use. Has this happened to anyone else, maybe something wrong with the root?

Nope, must be a bad app. Go into recovery and clear cache and dalvik to start.
Sent from my VS980 4G using Tapatalk

Having the same issue after multiple factory ressets, stock and cm. Anyone else?

Having similar issue as well.! Seemed to happen after rooting with Towelroot however I did that almost right after getting the device so I cannot say they are related for sure. Maybe xposed, even though I have just one module right now on.
Sent from my SM-T320 using Tapatalk

drmacrofish said:
Having similar issue as well.! Seemed to happen after rooting with Towelroot however I did that almost right after getting the device so I cannot say they are related for sure. Maybe xposed, even though I have just one module right now on.
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
I had that problem. Did you disable knox? I unrooted, did a factory reset, then rerooted (with towel root). After installing SuperSu, I left knox running. It has been very stable since then. YMMV, but looks good now. I also removed apps I wasn't using.
One more thing, I haven't installed xposed yet. Might do that later this week.
Cheers,
Rich
Sent from my BN NookHD+ using Tapatalk
---------- Post added at 11:37 PM ---------- Previous post was at 11:36 PM ----------
sn0n said:
Having the same issue after multiple factory ressets, stock and cm. Anyone else?
Click to expand...
Click to collapse
Reboots or resets? I haven't tried cm yet.
Cheers,
Rich
Sent from my BN NookHD+ using Tapatalk

rholm said:
I had that problem. Did you disable knox? I unrooted, did a factory reset, then rerooted (with towel root). After installing SuperSu, I left knox running. It has been very stable since then. YMMV, but looks good now. I also removed apps I wasn't using.
One more thing, I haven't installed xposed yet. Might do that later this week.
Cheers,
Rich
Click to expand...
Click to collapse
I did disable Knox which basically involves SuperSU freezing Knox notifications. I guess I could unfreeze it to see what happens. I also just disabled some modules in xposed to see if that works. I only have greenify enabled right now. I was using a module to allow/fix read/write access to the external SD card, but disabled it. I am going to see and will report back.
Sent from my SM-T320 using Tapatalk

drmacrofish said:
I did disable Knox which basically involves SuperSU freezing Knox notifications. I guess I could unfreeze it to see what happens. I also just disabled some modules in xposed to see if that works. I only have greenify enabled right now. I was using a module to allow/fix read/write access to the external SD card, but disabled it. I am going to see and will report back.
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
I also had the random reboot issue with the NE3 firmware. But that was because I disabled "additional" KNOX module aside from what SuperSU disabled. So once I went back to reflash OFW, towel root, and just let SuperSU disable KNOX. No more random reboots (cross fingers hope I didn't speak too soon). But this has become a huge difference.
FYI, here are other things I did after rooting (still no issue):
1. Installed busybox
2. Modified build.prop to change ro.securestorage.support=true to false (read that this fixes some Wifi issue)
3. Installed SDFix: Kitkat Writable MicroSD from Playstore (this works so you don't need an Xposed module)

Lolento said:
I also had the random reboot issue with the NE3 firmware. But that was because I disabled "additional" KNOX module aside from what SuperSU disabled. So once I went back to reflash OFW, towel root, and just let SuperSU disable KNOX. No more random reboots (cross fingers hope I didn't speak too soon). But this has become a huge difference.
FYI, here are other things I did after rooting (still no issue):
1. Installed busybox
2. Modified build.prop to change ro.securestorage.support=true to false (read that this fixes some Wifi issue)
3. Installed SDFix: Kitkat Writable MicroSD from Playstore (this works so you don't need an Xposed module)
Click to expand...
Click to collapse
I have also done 1 and 3. What does 2 fix? My Wifi has been pretty good.
Cheers,
Rich
Sent from my SCH-I535 using Tapatalk

rholm said:
I have also done 1 and 3. What does 2 fix? My Wifi has been pretty good.
Cheers,
Rich
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
I would suggest don't try to fix something that isn't broke.

I have the rebooting problem. At first I ignored the problem but now it is starting to irritate me. I rooted almost immediately after getting the tablet so I am not sure if rooting messed it up.
I'm hoping I did not receive a defective device... can someone confirm that this is not hardware related??

kinggg1 said:
I have the rebooting problem. At first I ignored the problem but now it is starting to irritate me. I rooted almost immediately after getting the tablet so I am not sure if rooting messed it up.
I'm hoping I did not receive a defective device... can someone confirm that this is not hardware related??
Click to expand...
Click to collapse
Mine was also rebooting. So, i unrooted, wiped, and the rerooted. So far, it's been very stable. I installed xposed today. No problems yet, but i only have a few modules installed.
Cheers,
Rich

Thanks for the tip, I will try this and report back... Will be really glad I did not burn money on an expensive defective tablet

kinggg1 said:
Thanks for the tip, I will try this and report back... Will be really glad I did not burn money on an expensive defective tablet
Click to expand...
Click to collapse
I'm pretty sure it's fixable. I've seen random reboots on most of my devices from time to time. Just need to find the app or configuration that is causing it.
Cheers,
Rich

For me is seems that it was freezing Knox that was causing the reboots. Once I unfroze it, no more random reboots. Then I installed a custom ROM with Knox removed and all is good.
Sent from my SM-T320 using Tapatalk

drmacrofish said:
For me is seems that it was freezing Knox that was causing the reboots. Once I unfroze it, no more random reboots. Then I installed a custom ROM with Knox removed and all is good.
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
I agree. That does seems to be the difference here, too.
Cheers,
Rich

reboot
the reboots are only with root. I tried many root methods, always reboots.
Now i flashed the F3 Firmware on my t325 , dont root and no reboots since 1 week.
Something makes trouble in our devices if its rooted.

konsolen said:
the reboots are only with root. I tried many root methods, always reboots.
Now i flashed the F3 Firmware on my t325 , dont root and no reboots since 1 week.
Something makes trouble in our devices if its rooted.
Click to expand...
Click to collapse
I'm rooted with no reboots. I didn't disable knox. Everything is very stable.
Cheers,
Rich
Sent from my SCH-I535 using Tapatalk

konsolen said:
the reboots are only with root. I tried many root methods, always reboots.
Something makes trouble in our devices if its rooted.
Click to expand...
Click to collapse
I rooted my 8.4 with towel root. It always rebooted (or maybe just reset) every time I turned it off when certain applications were running (Amazon Kindle, MX Player, and some others). For some reason all I had to do was reinstall the apps and I no longer had any rebooting problems.

Solution
I updated my T520 from NAE to NG1 using Odin and rerooted it with CF method and I was experiencing random reboots. I did tow things:
1. I defrosted the knox notifications in TB (I had disabaled it when super user asked me to...)
2. I went to SuperSU app's settings under cleanup I tapped reinstall and followed the given commands there...
I have not had a single reboot since then and it's been 2 days now...
I just wanted to share this with those that are having random reboots. Give it a try... It worked for me.

Galaxy Tab Pro 8.4 (T-320) keeps restarting
Hello guys!
I have a big problem with my Galaxy Tab Pro 8.4 (T-320). I bought it a few days ago....after I turn it on it shows me errors of search, media, settings ...etc. has stopped. I repaired these errors with instructions found here on XDA, but there is another problem. My tablet keeps restarting randomly without any error. So I downloaded the latest firmware from sammobile, flashed it, but it dowsnt help. I rooted it, flashed TWRP and a custom ROM, but it keeps restarting. Sometimes after full boot, sometimes when samsung logo appears, but in recovery and download mode it is stable. Can someone help me?
( sorry for my bad english :/ )

[Q] Would this be a hardware problem? T210R hangs, reboots

On my stock T210R I experienced the system freeze and reboot just a few seconds after power up, it was all stock.
I installed TWRP 2.7.1.0, then wiped it off. Installed gr8nole's ROM (Nov '13 deodexed, rooted). After doing so, there was a Kernel Panic on boot, so I installed Blackhawk kernel 2.1.
After doing all of the above, it still boots up, comes to the initial setup page, runs a few seconds, freezes and reboots.
Do you think this is a hardware problem?
Any suggestions before I sell it for parts on ebay?
Thanks in advance

logs?
poodleDoo said:
On my stock T210R I experienced the system freeze and reboot just a few seconds after power up, it was all stock.
I installed TWRP 2.7.1.0, then wiped it off. Installed gr8nole's ROM (Nov '13 deodexed, rooted). After doing so, there was a Kernel Panic on boot, so I installed Blackhawk kernel 2.1.
After doing all of the above, it still boots up, comes to the initial setup page, runs a few seconds, freezes and reboots.
Do you think this is a hardware problem?
Any suggestions before I sell it for parts on ebay?
Thanks in advance
Click to expand...
Click to collapse
does it stay long enough to get logs? even if you have to boot a few times to get them onto your pc and check them out from there?
also with twrp there's some unexplained issue of /data getting corrupted on flashes, the only remedy for which seems to be using the format data option.
m

moonbutt74 said:
does it stay long enough to get logs? even if you have to boot a few times to get them onto your pc and check them out from there?
also with twrp there's some unexplained issue of /data getting corrupted on flashes, the only remedy for which seems to be using the format data option.
m
Click to expand...
Click to collapse
Sometimes it goes for several minutes before it freezes, especially if the battery is full, even then apps just randomly close without a notification... Maybe storage related?
Care to share how to gather logs?
Thanks

I would use ODIN or KYES to flash it back to OEM stock firmware. Also remove the micro SD card if you have one in there, sometimes corrupt cards can cause boot loop.

true
moonbutt74 said:
does it stay long enough to get logs? even if you have to boot a few times to get them onto your pc and check them out from there?
also with twrp there's some unexplained issue of /data getting corrupted on flashes, the only remedy for which seems to be using the format data option.
m
Click to expand...
Click to collapse
@moonbutt74 there is a prob with corrupted flashes sometimes sometimes not
but i would just go to odin and reinstall the stock firmware then trt again

sharing
poodleDoo said:
Sometimes it goes for several minutes before it freezes, especially if the battery is full, even then apps just randomly close without a notification... Maybe storage related?
Care to share how to gather logs?
Thanks
Click to expand...
Click to collapse
the answer i got to the same question
http://forum.xda-developers.com/showthread.php?t=1520508
http://forum.xda-developers.com/showthread.php?t=2185929
fyi- you can get a lot of different info from files that have info to give with
cat /directory/file > /sdcard/output.file
mostly from /proc and digging through /sys
when you get something crazy looking that goes on forever press ctrl then c to stop.
m

dsilx said:
@moonbutt74 there is a prob with corrupted flashes sometimes sometimes not
but i would just go to odin and reinstall the stock firmware then trt again
Click to expand...
Click to collapse
The tablet did the same without the sdcard, and I tried a couple times to do a factory reset with no luck.
The fact that it does the same with a different ROM and kernel is what makes me think it's hardware related
moonbutt74 said:
the answer i got to the same question
http://forum.xda-developers.com/showthread.php?t=1520508
http://forum.xda-developers.com/showthread.php?t=2185929
fyi- you can get a lot of different info from files that have info to give with
cat /directory/file > /sdcard/output.file
mostly from /proc and digging through /sys
when you get something crazy looking that goes on forever press ctrl then c to stop.
m
Click to expand...
Click to collapse
Cool, i'll get syslog installed and see if I can find anything.

Weird thing... It's been up for a day now, I have catlog running and recording; the only different thing is that I enabled battery saving mode, and batt is 94%; I have not used any apps other than checking battery and running catlog, but I did not have to use it for it to freeze and reboot...
If it is still running by this evening, I'll enable one thing at a time (GPS, sound, etc...)
Thanks @moonbutt74 and @dsilx

awesome
poodleDoo said:
Weird thing... It's been up for a day now, I have catlog running and recording; the only different thing is that I enabled battery saving mode, and batt is 94%; I have not used any apps other than checking battery and running catlog, but I did not have to use it for it to freeze and reboot...
If it is still running by this evening, I'll enable one thing at a time (GPS, sound, etc...)
Thanks @moonbutt74 and @dsilx
Click to expand...
Click to collapse
Awesome to hear sounds like @moonbutt74 was right
Hope it keeps working have fun

Ok, it seems to be hardware, as soon as I disable Power Saving mode, the tablet freezes and reboots.
As I understand, power saving mode limits the CPU to a lower performance tier; so I think the CPU is having troubles.
Oh well, as long as I don't try to mine bitcoins with the tablet, I should be good to go.

cool
poodleDoo said:
Ok, it seems to be hardware, as soon as I disable Power Saving mode, the tablet freezes and reboots.
As I understand, power saving mode limits the CPU to a lower performance tier; so I think the CPU is having troubles.
Oh well, as long as I don't try to mine bitcoins with the tablet, I should be good to go.
Click to expand...
Click to collapse
Well that sucks u have to have battery saver on all the time but at least its working now

hmmm
p,
out of curiosity, are you running any custom cpu/battery/governor apps ?
are you on 4.1 of 4.2, and have you tried ketut's kernel ?
m

moonbutt74 said:
p,
out of curiosity, are you running any custom cpu/battery/governor apps ?
are you on 4.1 of 4.2, and have you tried ketut's kernel ?
m
Click to expand...
Click to collapse
I'm running rooted deodexed stock ROM with Blackhawk 2.1 kernel.
But as I mentioned in the OP, the problem was there with the full stock device, the new ROM and kernel were installed after the problem started.

ouch
i think you pegged it right with internal storage being damaged.
only thing i can think of besides getting your money back is do a full data partition wipe and format
and a full system wipe and format
either way that has to suck. sorry i couldn't help.
m

[Q&A] ||ROM|| JEDI Open Source Project || 4.4.4 || MultiWindow || 10|04

Q&A for ||ROM|| JEDI Open Source Project || 4.4.4 || MultiWindow || 10|04
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:

Not sure this is possible...
First, this is an outstanding job! I am in love with this rom so far, and made an account just to subscribe to this thread. I don't want to miss what you guys have in store!
But, I have a question, many apps on the store that I used to use (artflow, photoshop touch) require a "tablet device". These would work using stock, and worked using stock or Cyanogenmod for Note 2, but somehow that isn't triggering with this rom.
I mean, I'm sticking with this as my daily driver so far, regardless. I just used both those apps a lot.
Thanks for this amazing rom, it breathed new life into my phone!

Oograh said:
First, this is an outstanding job! I am in love with this rom so far, and made an account just to subscribe to this thread. I don't want to miss what you guys have in store!
But, I have a question, many apps on the store that I used to use (artflow, photoshop touch) require a "tablet device". These would work using stock, and worked using stock or Cyanogenmod for Note 2, but somehow that isn't triggering with this rom.
I mean, I'm sticking with this as my daily driver so far, regardless. I just used both those apps a lot.
Thanks for this amazing rom, it breathed new life into my phone!
Click to expand...
Click to collapse
It may be the DPI setting by default but not sure. I would try changing DPI to 480, download apps and put DPI back. You can do this via build.prop or using an LCD density changer app
Sent from my A0001 using XDA Free mobile app

ptmr3 said:
It may be the DPI setting by default but not sure. I would try changing DPI to 480, download apps and put DPI back. You can do this via build.prop or using an LCD density changer app
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
That was it! Thank you so much!!!

Galaxy Gear Neo on Jedi 4.4.4
ANy help would be appreciated in getting my Gear Neo to work on this Rom.

Anyone know how to increase the incall volume?
Ptmr3 will have this issue fixed on the next update but I don't want to flash a different temp rom until new update is available.
I like this rom a lot.
Can someone help?

AE74 said:
Anyone know how to increase the incall volume?
Ptmr3 will have this issue fixed on the next update but I don't want to flash a different temp rom until new update is available.
I like this rom a lot.
Can someone help?
Click to expand...
Click to collapse
Normally the temp fix is to push vol down, then volume up when in a call.

kozmo21 said:
Normally the temp fix is to push vol down, then volume up when in a call.
Click to expand...
Click to collapse
Tried that already.
I have installed exdialer app. This app works if I am calling but not when receiving the call.

Anyone have any issues with the loss of data? Been running flawless for me up until the last 2 days. A reboot fixed it the first and second time but last night no matter what I did I could not get data back. Had to revert back to CM11.. if anyone has the reason/solution I'd love to go back.. I'll try to ready the thread fully if I get time today at work. Just seeing if anyone else experienced the same thing
Sent from my SGH-T889 using XDA Free mobile app

Is this ROM compatible with the AT&T version of the Note 2 (i317)? I've read good things about the ROM and am eager to try it, but would prefer to know beforehand.

Vibration doesn't work for me
Sent from my SGH-T889 using XDA Premium 4 mobile app

ProfeKarma said:
ANy help would be appreciated in getting my Gear Neo to work on this Rom.
Click to expand...
Click to collapse
Anybody??

ProfeKarma said:
Anybody??
Click to expand...
Click to collapse
I am pretty sure that you need a Touchwiz rom to have compatibility, otherwise it would be compatible with all android phones and not just Samsung Galaxy variants.

Hmm cleaned flashed the ROM twice now with gapps and cannot for the life of me get Bluetooth to work .. Tried to connect to car Bluetooth with the right passcode but it just will not connect
Edit: OK as long as the device doesn't require a passcode it will connect hmm how strange

phone restarts
Anyone have this problem? Phone keeps restarting when I try to change a contacts picture on the native contacts app (people app)
Wiped cache and dalvik doesn't solve the problem
edit: phone also restarts when i change wallpaper/lockscreen wallpaper but the changes to wallpaper and lockscreen wallpaper does stick, but the contacts picture changes doesn't stick.

Since having xposed installer enabled , and only greenify module checked on .. For some reason if I boot into recovery from the power menu it will boot loop on twrp 2.8.0.1.. Then will have to Odin and clean flash all over again .. 4 times now and still can't figure out why that happens .. Maybe xposed installer is the cause? So I decided to turn off the phone then hold up vol up power and home key to get to recovery but it loads the twrp screen then reboots the OS .. Not sure just what to do or about recovery.. Also made a full backup and changed cache, system, and data to f2fs format and restored to that system .. Could that be an issue as well?? Anyone please give an insight to this would be greatly appreciated
Edit: also running latest CM Agni kernel to support f2fs format

LaZiEebOi said:
Since having xposed installer enabled , and only greenify module checked on .. For some reason if I boot into recovery from the power menu it will boot loop on twrp 2.8.0.1.. Then will have to Odin and clean flash all over again .. 4 times now and still can't figure out why that happens .. Maybe xposed installer is the cause? So I decided to turn off the phone then hold up vol up power and home key to get to recovery but it loads the twrp screen then reboots the OS .. Not sure just what to do or about recovery.. Also made a full backup and changed cache, system, and data to f2fs format and restored to that system .. Could that be an issue as well?? Anyone please give an insight to this would be greatly appreciated
Edit: also running latest CM Agni kernel to support f2fs format
Click to expand...
Click to collapse
u might want to try to update twrp 2.8.1.0, I kept having boot loops at every reboot and had to pull battery. I dont know if it might help u, but it did fix the boot loops i kept having.

How do I turn off multi window? I keep getting a split screen with out an option to close one of the screens. Everything from woot to Amazon app.

I have installed Jedi Master 18 but the air menu function wills pen isn't working.
Sent from my SGH-T889 using XDA Free mobile app

I got a question ( tried the search function...didn't work). Sometimes when my phone goes to sleep, whether I lock it or it locks itself. It won't wake up... Tried the home button and power button and they won't wake it up from its deep sleep. The only thing that works is to pull the battery and that's a pain in the butt cause of my otter box case I have to take apart 2-4 times a day....love this rom but if I can't get this issue fixed I'm going back to liquid rom...thx in advance
Sent from my SGH-T889 using XDA Premium 4 mobile app

[Q&A] [ROM][SM-T900] CyanogenMod for Tab Pro 12.2 SM-T900 (v2wifixx)

Q&A for [ROM][SM-T900] CyanogenMod for Tab Pro 12.2 SM-T900 (v2wifixx)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][SM-T900] CyanogenMod for Tab Pro 12.2 SM-T900 (v2wifixx). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Rooting Tab Pro 12.2 with last firm done!
arcadia2uk said:
For rooting the latest firmware, did you use the CF-Auto-Root from the main site, marked KOT49H.T900XXUANB5, or a new one made for the KOT49H.T900UEUANI1? If the latter, would you mind posting a link to a T900UEUANI1 compatible version?
Click to expand...
Click to collapse
Don't needed. You can root the normal cf-auto-root with latest sock without problem.
After we pm chat last days about rollback to T900UEUAND4 as unique possibility for rooting, i decided to do a last try before that, and luckily works perfect:
-just did a factory reset to restore from B3 recovery i been trying to prev installed T900UEUANI1 stock, wipe caché with stock recovery, odined cf-auto-root and voilá, just rooted!
No need to do the old B3-rollback-prior-D4 method now. Just a normal auto-root with no hassling.

temp maybe?
chhaggerty said:
It sounds like you maybe having a "Sleep of Death" (SOD) issue. The T520 and P900 have had similar problems. I will out of town until Monday but I'll do some research and hope to have a solution soon.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
crpalmer said:
There is a deadlock in Samsung's code triggered by the CPU boost driver. Look in the t520 device repo for the commit that disables it (actually probably 2 commits because I removed some functionality that doesn't make sense for this processor).
Click to expand...
Click to collapse
Dauntless said:
Device: SM-T900
Android: 4.4.2 (Stock, unrooted)
Kernel: 3.4.39-2534013
When putting the tablet into sleep mode, it will automatically shut itself down. When I try to turn it back on, the tablet will only do so after I plugged in the charger. The battery itself is fully charged.
I've updated to the latest available firmware version that's available to me. I couldn't find any list of known issues, so I'm wondering if this is a common problem and if I should return my tablet?
Click to expand...
Click to collapse
Same here. It seems that the problem maybe is temperature: after some time charging it gets really hot and maybe can't awake from that and need rebooting.
I've disabled the magnet sensor vía 3rd app to off the close-lid functionality but don't improve the problem.
Here in summer the room gets to +30°c and the Tab ups to almost 65°c when it gets hot!
Maybe it just reach the temp threshold and self shutdown, or intend that not letting awake.
Perhaps CM11 build here charges battery too fast, with higher voltage than allowed and provoque overheating. I mean, i really feels that it's charging real fast..

Well currently its winter and cold. My tab was cool but it does not respond after deep sleep unless i reboot. Dev said he will look into it and i will wait. Not sure if temp is cause as mine was not definitely not hot.
Sent from my LG-D800 using XDA Free mobile app

lingarajug said:
Well currently its winter and cold. My tab was cool but it does not respond after deep sleep unless i reboot. Dev said he will look into it and i will wait. Not sure if temp is cause as mine was not definitely not hot.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Posted update last night, check it out

Thanks, btw, i was able to use ODIN to get a good version of TWRP and the ROM installed smoothly. I have encountered a few small bugs but nothing to report that is new. I noticed the "sleep of death" I think you are referring to, deep sleep resulting in a manual reboot to wake up. I have noticed my bluetooth disconnects and reconnects every few minutes during deep sleep..not sure why. will report back. Thanks SO SO much for the development, i love it, so sick of the green and blue and the settings tabs on this stock OS disgust me. I am curious tho, am I the only one who noticed significant slowdown and lag compared to stock? I do not put a lot of stock in benchmarks (skewed toward uncle sammy) but they also showed big slowdown....just my very humble and grateful early experiences. Thanks again.

total reflashing needed?
chhaggerty said:
Posted update last night, check it out
Click to expand...
Click to collapse
Well thanks, but,i don't see a flashing update but an entire 221MBs rom to flash..
Can you post just the little update file , if there's any, to flash above the installed rom?
I don't want to install rom, apps and config all over again.
Thanks!
-----
lingarajug said:
Well currently its winter and cold. My tab was cool but it does not respond after deep sleep unless i reboot. Dev said he will look into it and i will wait. Not sure if temp is cause as mine was not definitely not hot.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Yes you are right, i'd tried again and it SODs no matter what temp are. A shame.
-----
arcadia2uk said:
For rooting the latest firmware, did you use the CF-Auto-Root from the main site, marked KOT49H.T900XXUANB5, or a new one made for the KOT49H.T900UEUANI1? If the latter, would you mind posting a link to a T900UEUANI1 compatible version?
Click to expand...
Click to collapse
Well there's a problem right now, seems that this rom prevent to enter recovery.., this is what happen to me:
Reboot from Android with 'reboot to recovery' option and when the TWRP splash logo shows it enter in a bootloop always to this instance that TWRP logo appears.
Then i just installed the good old UAND4 rom and it works fine.
Maybe i shouldn't go to recovery direct from android to prevent bootloop happen and try to go the normal way from boot.
Don't know, maybe I'll try some day.., or maybe better wait to Android L comes to us.
Please advice all that stuff in the respective threads, i can't.., cause' these 'noobs-wait-to-10-posting-before' rules..
Greetings.

bertoxo said:
1. Can you post just the little update file , if there's any, to flash above the installed rom?
2. Yes you are right, i'd tried again and it SODs no matter what temp are. A shame.
3. Well there's a problem right now, seems that this rom prevent to enter recovery.., this is what happen to me:
Click to expand...
Click to collapse
1. You can "dirty"-flash (install w/o wiping) the new ROM over the old one - nothing to re-install - if you wish you could extract the kernel (boot.img) and flash it by Flashify
2. There haven't been reported any SOD issues after flashing chhaggerty's latest ROM version
3. I have had no issues with with TWRP after having flashed the KOT49H.T900UEUANI1 - I just assume that some parts of the Firmware, not touched by cm, has been improved (but since this is WIFI only, it might not be the case for a non phone device) why I preferred to make the update.

arcadia2uk said:
1. You can "dirty"-flash (install w/o wiping) the new ROM over the old one - nothing to re-install - if you wish you could extract the kernel (boot.img) and flash it by Flashify
2. There haven't been reported any SOD issues after flashing chhaggerty's latest ROM version
3. I have had no issues with with TWRP after having flashed the KOT49H.T900UEUANI1 - I just assume that some parts of the Firmware, not touched by cm, has been improved (but since this is WIFI only, it might not be the case for a non phone device) why I preferred to make the update.
Click to expand...
Click to collapse
1- but dirty flashing the update full rom performs well?
1.2- only the boot.img is needed for update?
3- have you tried the reboot-to-recovery option from android?
Thanks.

bertoxo said:
1- but dirty flashing the update full rom performs well?
1.2- only the boot.img is needed for update?
3- have you tried the reboot-to-recovery option from android?
Thanks.
Click to expand...
Click to collapse
The changes done between the two versions (99% sure) was only some modifications in the kernel-code. Why flashing the kernel only should be fine, it will resolve the SOD and also make it run cooler. But if you wish you can also dirty-flash. However, cover your bases with a full back-up.
No issues at all with the reboot to recovery option

arcadia2uk said:
The changes done between the two versions (99% sure) was only some modifications in the kernel-code. Why flashing the kernel only should be fine, it will resolve the SOD and also make it run cooler. But if you wish you can also dirty-flash. However, cover your bases with a full back-up.
No issues at all with the reboot to recovery option
Click to expand...
Click to collapse
Can you give me the boot.img update only to try (5MBs)?
220MBs in the posted download site go sooo sloow on any server..
Thanks a lot!

bertoxo said:
Can you give me the boot.img update only to try (5MBs)?
220MBs in the posted download site go sooo sloow on any server..
Thanks a lot!
Click to expand...
Click to collapse
HERE it is
unzip the downloaded file
place boot.img on your SD
use Flashify to flash the kernel
after this I believe flashify will boot you up in recovery, just reboot and you should be good to go.
Just remember to make a back-up for just in case...

HERE it is
unzip the downloaded file
place boot.img on your SD
use Flashify to flash the kernel
after this I believe flashify will boot you up in recovery, just reboot and you should be good to go.
Just remember to make a back-up for just in case...
Click to expand...
Click to collapse
Thanks!
Installed boot.img and works flawlessly. Now i can back using lid cover again and no more hangs.
I hope they can solve the auto-rotate thing next time.

flashing screen, powering down...
I have twrp 2.8, v2 of our Cyanogenmod, set processor to on demand as suggested...
Still when I play games like CoC and others, if I am not plugged in even with a lot of bat% left, I get a flashing screen and occasionally my tab just decides it needs to shut off.
Any thoughts on what to do? I have greenify and Xposed installed too...
It pretty frustrating.
THANKS GUYS!!

spk99 said:
I have twrp 2.8, v2 of our Cyanogenmod, set processor to on demand as suggested...
Still when I play games like CoC and others, if I am not plugged in even with a lot of bat% left, I get a flashing screen and occasionally my tab just decides it needs to shut off.
Any thoughts on what to do? I have greenify and Xposed installed too...
It pretty frustrating.
THANKS GUYS!!
Click to expand...
Click to collapse
My guess is that gaming need more power, why I would stop greeify and reset the governor to interactive while gaming. But other than that I have no ideas, as I haven't heard of this problem before.

This ROM is fantastic! Smooth, fast, responsive and just as described...big thanks.

spk99 said:
I have twrp 2.8, v2 of our Cyanogenmod, set processor to on demand as suggested...
Still when I play games like CoC and others, if I am not plugged in even with a lot of bat% left, I get a flashing screen and occasionally my tab just decides it needs to shut off.
Any thoughts on what to do? I have greenify and Xposed installed too...
It pretty frustrating.
THANKS GUYS!!
Click to expand...
Click to collapse
I don't know if you noticed, but chhaggerty just released a version 3, maybe this will work as there has been some work on the governors.

chhaggerty said:
New update see OP
Click to expand...
Click to collapse
Can i use the 4.4.4 GAPPS instead of 4.4.3 you are posting?
arcadia2uk said:
Thanks for another quality update, notably when reading how other cm11 exynos versions always seems to break something. With your T-900 cm11, I have never had any issues. The latest version is still running smooth, the changes in the CPU governor will probably allow for better battery life with the added conservative setting. However, I don't know what trade-off this will have on performance.
Click to expand...
Click to collapse
Maybe they start to use the big.LITTLE behavior of the Exynos, instead of ever using just the full power a15 cluster (battery eater).

I've haven't tried it but since it's a 4.4.4 rom they should work fine.

Error flashing ROM
Hi guys,
I get this error message when I try to flash CM11:
"Can't install this package on top of incompatible data. Please try another package or run a factory reset"
This is a brand new rooted SMT-900 Tab Pro 12.2". Here's some notes:
- I received the error using V1, V2, and V3, all receive the error message
- I downloaded two copies of v3 from two separate mirrors (CA and AZ), both receive the error message
- I did a factory reset and still received the error message
- Wiped davlik/cache/system partitions
- Tried on TWRP 2.7 and 2.8, both receive same error message
- All I have done to this tablet is root it, install TWRP, and create one backup
Any thoughts? I can try using CWM if someone can give me a quick overview of how to install it and remove TWRP (or keep TWRP).

.

..

MuF123 said:
Hi,
I am on latest ROM + custom kernel and I get random reboots every hour od so. It is kinda annoying and all that booting drains the battery.
Any ideas what to do? How to diagnose it?
Click to expand...
Click to collapse
The same issue

..

never had a reboot issue, also using skin's kernel and never had a reboot. I heared about ambient mode reboots in this watch but never had one custom or stock.
I think you can take a bug report of your watch with the phone app after the reboot, and during random times, maybe these bug reports will contain the info, also you can download kernel auduitor app to try different settings

I have not rooted either my nexus 6p or the watch... I sometimes get to my watch and it has rebooted??
Is there a log that I can look into and see the reboot time or reason??

watch in rebooting loop
Watch keeps rebooting constantly. Have latest update installed. Only option is to shut down , also because watch gets very hot.
Called Huawei Netherlands, but they refuse to repair the watch because its bought in Dubai.
Anyone knows how to solve problem? (i'm not a programmer)

..

Same issue here. Just unlocked bootloader and installed Twrp and custom kernel from skin. Got reboots

MuF123 said:
try flashing custom kernel:
http://forum.xda-developers.com/hua...kernel-skin1980s-huawei-watch-kernel-t3219576
you will find "how to" in first post and there is version 3.0 somewhere in thread
Click to expand...
Click to collapse
That kernel is for Lollypoop! He is still developing a Marshmallow kernel...

..

MuF123 said:
dude, that reply is 3 months old.
Click to expand...
Click to collapse
Oops, moving too fast didn't want anyone to have boit loop issues.