Many Screenshots (Clickable)
Based on Xiaomi.eu 7.2.1.0 (Multilanguage Rom)
Description of Service Pack 1 :
Better gps.conf
Moved Aditional Settings menu to end of Settings
Deleted spaces between menus in Settings and Aditional Settings
Nik Rom Additional Menu in Settings
App OTA removed from the launcher
App OTA made user Undelete (now you can make it to the startup, in theory this is an opportunity to add to the app in the background checks for updates itself)
To OTA application added option "Support Nikoz47"
Enclosing the ability to remove ads
Daily Wallpaper
Fixed the toggle switch "Recommended" folders
Fix the diode when charging Red 0-89%, 90-99% Yellow, Green 100%
Display critical discharge was reduced to 5%
Tile leads the internet in the choice of type of network
Tile "Hot Spot" renamed the "Wi-Fi modem"
Tweek Memory Killer for better multitasking
Changing the TTL value of 63 for distribution on the Internet yota
Fix Bluetooth operation (MiBand, A2DP)
Icons Wi-Fi network and moved to the left
It increased the size of the clock and date in the status bar
Customization hours and dates
Improved sound quality of the speaker
Added the ability to customize icons battery icons a lot, hundreds, or even thousands of … (Modification conflict with some settings of statusbar Miui_Tweaks, need to "feel" by hand)
Fixed microphone bug after shooting video
Remove ads from the app "Downloads"
Slightly tweaked the font oiliness
Edge Display
Improved gps.conf
Change the label in the "About Device" from the "build number" on the "Firmware"
Root – RC-SuperSU-v2.70
Improved call recording quality
Bootanimation Nik Rom Project
Daily wallpaper
Connection Mode USB Mass Storage
Names in 2 lines in the Call / Contact
Priority notifications when charging
Colors diodes for charging: Red 0-89%, 90-99% Yellow, Green 100%
Display discharge is reduced to a critical 5%
Extended menu "Network mode" (subject: Only 3G, only 4G)
MiRemote (equipment control via IR port)
Icons in the Advanced settings
init.d Support
Selinux: Permissive
Browser without cninia sumbols
MiuiVideo without virus
Added my own OTA (Settings – About phone – System Update) (In order to avoid ambiguity, I have completely replaced the stock OTA on their own, you will not fly the Chinese stock not clean multirom, and immediately my build)
ClearMotion (MiraVision ClearMotion – a technology company MediaTek, which makes the picture more smoothly by increasing the frame rate (usually -. From 24/30 to 60 fps specific principle of the technology, the company did not disclose).
Added a few more ringtones and alarm sounds for yourself
Added 3 extra points in developer mode: Engineering menu, Test menu, information menu
Added MiraVision item in the display settings
Miravision translated into Russian
I did symlink from their ringtones in the ringtones folder, the alarm, so as not to take up too much space on a device
Install guide:
Flash through recovery with full wipe (if intalling on Xiaomi.eu Stable wipes not necessary in theory...)
Many Screenshots (Clickable)
Download:
Mega | Yandex | Google Drive
XDA:DevDB Information
Nik Rom Project, ROM for the Redmi Note 2
Contributors
Nikoz47
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: MIUI v7.2
Version Information
Status: Stable
Created 2016-04-07
Last Updated 2016-04-07
Thank you great work will Test it tomorrow
Gesendet von meinem Redmi Note 2 mit Tapatalk
Will it be updated to SP3 like MultiRom version ? Or XEU SP1 version is like MultiRom SP3 version ?
Thanks for the great work, will try it
Sent from my Redmi Note 2 using Tapatalk
Gyovany96 said:
Will it be updated to SP3 like MultiRom version ? Or XEU SP1 version is like MultiRom SP3 version ?
Click to expand...
Click to collapse
MultiRom SP3 - based on 7.2.2
XEU SP1 - based on 7.2.1
Gyovany96 said:
Will it be updated to SP3 like MultiRom version ? Or XEU SP1 version is like MultiRom SP3 version ?
Click to expand...
Click to collapse
This rom will have OTA updates as well, but each time updates are different
Can you please fix this?
rom looks good with rich features.. love to try it..
thanks..
Dev111 said:
Can you please fix this?
Click to expand...
Click to collapse
Cant, i didn't make those viruses, they are default by xiaomi.eu , and perhaps on other xiaomi roms
First comment on xda, only to say:
Great work! And big thank you for this translated Version.
Hope many dudes support your work!
Gesendet von meinem Redmi Note 2 mit Tapatalk
Sorry my fault i tought it is possible to fix that anyway great Rom keep the updates going :good::good:
Nikoz47 said:
Cant, i didn't make those viruses, they are default by xiaomi.eu , and perhaps on other xiaomi roms
Click to expand...
Click to collapse
Be sp3 7.2.2 eu-based MultiLanguage?
Dean27 said:
Be sp3 7.2.2 eu-based MultiLanguage?
Click to expand...
Click to collapse
.eu SP 1 is MultiLang, there is no 7.2.2 SP3 based on .eu (only Multirom, but it isnt multilag)
Want back stock clock etc, can use fron another multilang ROM?
Enviado do meu Redmi Note 2 através de Tapatalk
malcriado said:
Want back stock clock etc, can use fron another multilang ROM?
Enviado do meu Redmi Note 2 através de Tapatalk
Click to expand...
Click to collapse
No way!
Use this one: https://yadi.sk/d/a09xj9LlqptDn
Gracias por la ROM
Thanks for your rom
Enviado desde mi Redmi Note 2 mediante Tapatalk
Nikoz47 said:
No way!
Use this one: https://yadi.sk/d/a09xj9LlqptDn
Click to expand...
Click to collapse
Any wipe before?
No. Works well thanks
Enviado do meu Redmi Note 2 através de Tapatalk
Busaton said:
Any wipe before?
Click to expand...
Click to collapse
Without wipes
I just got the update through ota, and it installed the multirom version.
Related
FIUIFeature Interactive UINOTE:
THIS ROM IS NOT CREATED BY ME AND THIS ROM IS CREATED BY 24k pure Diao I FOUND IT ON SOME CHAINESE FORUM
ROM DETAILS
* Android version: 4.4.4
* Current FIUI version: 2.33.0
* Based on: Cyanogenmod 11
* Multilanguage
* The status bar color matches every app you open
* You can choose beetween Dalvik and ART runtime!
* ROM porter: 24K PURE DIAO
* ROM date: 2015/09/05
FIUI 2.33.0 BETA CHANGELOGS:
Reduce sliding gestures on the virtual key vibration intensity (we want to get rid of, but we still consider a little better feedback, so reducing the intensity)
Remove Task Manager task excess of lock screen icon
Removing excess QQ icon status bar, leaving only one
Repair 480p models ActionBar title background is not the right questions
Lock screen repair touch screen can not wake up problem
Repair Click notification bar to reset the stopwatch FC problems arise
Optimization stopwatch in style notification bar shows the overall system in line with style
Optimization Bluetooth pop, FC pop styles, from black into white style style
Optimized UI interface Bluetooth device selection
Optimization of the status bar information about the cell phone out of the movie
Update framework program default icon resource
Update Google Pinyin, Google GmsCore
inbuilt google play store
important guide:go settings then accesability and tap on enable google apps after your playstore will appear
Credits:
ROX
24k pure diao for porting
DOWNLOAD LINKS are on 2nd post
XDA:DevDB Information
FIUI , ROM for the Samsung Galaxy S3 Neo
Contributors
ashok225123, ashok225123
ROM OS Version: 4.4.x KitKat
Version Information
Status: Beta
Current Beta Version: 2.33.0
Created 2015-12-27
Last Updated 2015-12-27
ROM Installation:
* Download the full ROM from below link,gapps(optional)
* Put this 2 things on your internal or external SD card.
* Wipe Data, Cache partitions etc
* Flash the ROM, then GAPPS(optional)
* Reboot and Enjoy!
DOWNLOAD LINK:
http://www.mediafire.com/download/mgqpldvw2j9t8y5/FIUI_for_s3i_beta_2.33.0.zip
BUGS:
same as rox cm 11
this rom has some force closes
it is suitable for single sim users(im not tested on gt-i9301i)
no audio calls on 2nd sim(gt-i9300i) i have tested
messeenger not worked for me use google messenger
etc.........................
reserved
Cool
Looking great .I will install it now
Finally something that looks like MIUI. Thanks for sharing.
Is it for GT-I9301I? And is it multilingual?
Yes it's multilingual and works on 9301I
Inviato dal mio GT-I9301I utilizzando Tapatalk
Well
I am writing while I have this Rom istalled. It looks really good but I dont like the Google Play and Chrome Force Closes For everyone who wants a complete different style to other Roms this is the best.
Google fc stops after their update. This is an interesting rom but some important function ( in my opinion) are missing
Inviato dal mio GT-I9301I utilizzando Tapatalk
@ashok225123 can I make a video about this rom and upload it on YouTube?
German Developer said:
@ashok225123 can I make a video about this rom and upload it on YouTube?
Click to expand...
Click to collapse
i dont have any objection
please go ahead
Any other known bugs? How's the battery and camera?
Can anyone post more screenshots?
ashok225123 said:
i dont have any objection
please go ahead
Click to expand...
Click to collapse
Ok, I will do a review of this rom fi he has something against it I will delete it
I tried and tested this rom for 1 hour
Really awesome, good looking, handy features, slick animations, google chrome can't download files (IDK why)
My device is GT-I9301I so camera didn't worked i tried camera fix by rox, nothing happened, anyone can contact the porter and inform him. TiA
Is this rom for i9300i
salah eltony said:
Is this rom for i9300i
Click to expand...
Click to collapse
yes it is made for gt-i9300i
but it is based on cm 11
ashok225123 said:
yes it is made for gt-i9300i
but it is based on cm 11
Click to expand...
Click to collapse
Thanx ashok
salah eltony said:
Thanx ashok
Click to expand...
Click to collapse
this is a beta version so it has little bit buggy
so im waiting for stable release
ashok225123 said:
this is a beta version so it has little bit buggy
so im waiting for stable release
Click to expand...
Click to collapse
Ashok can you contact the dev and inform him about the bugs i listed in my post?
By the way thanks for sharing.
For me, the camera fix work.
Inviato dal mio GT-I9301I utilizzando Tapatalk
ashok225123 said:
this is a beta version so it has little bit buggy
so im waiting for stable release
Click to expand...
Click to collapse
Very Good
ROM for Sony Smartwatch 3 [MEC24H/MWD49B/M1D63G/M1D63X/M1D64T, Android 6.0.1]
ROM Features:
Stock base
Rooted
Custom Kernel tetra_3.x
TWRP recovery
Tweaks
Click to expand...
Click to collapse
Actual Versions
M1D64T v1/v2
Stock M1D64T base
Rooted
Kernel tetra_3.14.45
Disabled Low Bit Ambient Mode
Improved application installation time
Increased UI speed
TWRP recovery
v1- 2 cores version, v2- 4 cores version
Click to expand...
Click to collapse
Version history
Kernel tetra_3.14.33x (with 4 active cores)
M1D63X v2
Stock M1D63X base
Rooted
Kernel tetra_3.14.31x (with 4 active cores)
Disabled Low Bit Ambient Mode
Improved application installation time
Increased UI speed
TWRP recovery
M1D63X v1
Stock M1D63X base
Rooted
Kernel tetra_3.14.29x (with 4 active cores)
Disabled Low Bit Ambient Mode
Increased UI speed
Stock recovery
M1D63G v1
Stock M1D63G 6000 test-keys base
Rooted
Removed all debugging stuff
Kernel tetra_3.14.19 (with 2 active cores)
Disabled Low Bit Ambient Mode
Increased UI speed
v 3.0
Stock MWD49B base
WearSuperSu pre-installed
Kernel tetra_3.14.16 (with 2 active cores)
Disabled Low Bit Ambient Mode (thanks to andrewia)
Increased UI speed
v 2.0
WearSuperSu pre-installed
Changed ART/Dalvik options to increase speed
v 1.0
Stock MEC24H base
Kernel tetra_3.14.7
Disabled Low Bit Ambient Mode (thanks to andrewia)
Increased ART/Dalvik speed
Increased UI speed
4 active cores
Minor tweaks
Click to expand...
Click to collapse
Installation:
Put ROM to your virtual SDCard
Boot into TWRP recovery
Make reset to factory default
Select "Install", and choose ROM zip file
After installation completed- reboot watch
If necessary - make full wipe
Click to expand...
Click to collapse
Downloads
M1D64T v1/v2
ROM_SW3_6.0.1_M1D64T_v1 (2 cores)
ROM_SW3_6.0.1_M1D64T_v2 (4 cores)
Update package from M1D63X to M1D64T
Update package from M1D63X to M1D64T
M1D63X
ROM_SW3_6.0.1_M1D63X_v3
Mirrors:
ROM_SW3_6.0.1_M1D63X_v3
M1D63G
SW3_6.0.1_M1D63G_6000_userdebug_v1
SW3_6.0.1_M1D63G_6000_userdebug_v1_twrp.zip
MWD49B
SWR50_6.0.1_MWD49B.zip v3
MEC24H
SWR50_6.0.1_MEC24H v2 (4 cores version)
SWR50_6.0.1_MEC24H v2 (2 cores version)
Recovery
TWRP recovery
Click to expand...
Click to collapse
Code:
[COLOR="Red"]DISCLAMER[/COLOR]
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or
you getting fired because the alarm app failed. Please do some research if you
have any concerns about features included in this ROM before flashing it!
YOU are choosing to make these modifications, and if you point the finger
at me for messing up your device, I will laugh at you.
If you like my work- Donate to me
XDA:DevDB Information
Sony Smartwatch 3 ROM, ROM for the Sony Smartwatch 3
Contributors
alex6600
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Created 2016-05-19
Last Updated 2017-01-25
Reserver by OP
Thanks a lot !!!!
I will try....
Right now I try to build ROM with root. Hope today I make it.
OP updated with version 2.
Rom rooted. Also change some dexopt flags.
There is 2 version. With 2 and 4 active cores.
Version 1 is excellent, no reboot, battery seems to be good, I lost 40% in 12 hours with 1 hour with fit active for biking.
I'm in weekend , I hope I could download version 2 here....
Thanks a lot.
Envoyé de mon E5823 en utilisant Tapatalk
Is it normal that wear su doesn't appear in the app list? It was the same before when I used it separately but I want to be sure....
Thanks for your work,I installed the 2 cores version.
Envoyé de mon E5823 en utilisant Tapatalk
mickael91210 said:
Is it normal that wear su doesn't appear in the app list? It was the same before when I used it separately but I want to be sure....
Thanks for your work,I installed the 2 cores version.
Envoyé de mon E5823 en utilisant Tapatalk
Click to expand...
Click to collapse
Supersu should not appear in app list in Wear.
Sent from my HTC One_M8 using XDA-Developers mobile app
Can you add full nfc support for this ROM?
Veter0k said:
Can you add full nfc support for this ROM?
Click to expand...
Click to collapse
Did you mean http://forum.xda-developers.com/showthread.php?t=3219713 this?
This package for LCA43, Android 5.1.1.
And this uses more battery, even not used.
Sent from my HTC One_M8 using XDA-Developers mobile app
alex6600 said:
Did you mean http://forum.xda-developers.com/showthread.php?t=3219713 this?
This package for LCA43, Android 5.1.1.
And this uses more battery, even not used.
Sent from my HTC One_M8 using XDA-Developers mobile app
Click to expand...
Click to collapse
Yes, I know, that is for 5.1. Perhaps you can adapt it for 6.0. It would be nice, use watch as credit card.
Veter0k said:
Yes, I know, that is for 5.1. Perhaps you can adapt it for 6.0. It would be nice, use watch as credit card.
Click to expand...
Click to collapse
I can build kernel with disabled SELinux for this.
alex6600 said:
I can build kernel with disabled SELinux for this.
Click to expand...
Click to collapse
If this could be done and added to the rom that woupd be great still had no reboots since flash rom is perfect battery life is great too.
Nice ROM!!
Thank you, for your work with this ROM.
alex6600 said:
I can build kernel with disabled SELinux for this.
Click to expand...
Click to collapse
Is this rom getting an update? And can I install updated kernel while on this?
RJASSI21 said:
Is this rom getting an update? And can I install updated kernel while on this?
Click to expand...
Click to collapse
It makes no sense to update ROM with only new kernel.
You can install new kernels with this ROM.
Sent from my HTC One_M8 using XDA-Developers mobile app
Battery life is good, and I have not yet noticed any reboots. I am updating from your previous ROM. Speaking of updating, how would we update this ROM to a newer version? Also, when the Android Wear 2.0 source is released, would it be possible to create a ROM for this watch/port it if it is never released for the SWR50? Thank you (presumably) for answering these questions, and thank you for your continued work on this watch!
KittenSauce said:
Battery life is good, and I have not yet noticed any reboots. I am updating from your previous ROM. Speaking of updating, how would we update this ROM to a newer version? Also, when the Android Wear 2.0 source is released, would it be possible to create a ROM for this watch/port it if it is never released for the SWR50? Thank you (presumably) for answering these questions, and thank you for your continued work on this watch!
Click to expand...
Click to collapse
If Google/Sony released any beta/release Android Wear 2 for our watch- I make port. Will wait.
Sent from my HTC One_M8 using XDA-Developers mobile app
alex6600 said:
If Google/Sony released any beta/release Android Wear 2 for our watch- I make port. Will wait.
Click to expand...
Click to collapse
Ok, thank you. For updating this ROM, the Marshmallow one, would I flash the newer ROM file, or do something else?
Based on China firmware - oreo
Debloated and optimized for speed/battery/stability
• Round corners option (Setting->Display->Round corners)
• Extended power/reboot menu
• Basic Gapps
• ad-blocking host file (you can revert to clean host or social media friendly flashing via TWRP one of the attachments)
• fast GPS lock
• pre-rooted with Magisk
• no anti-rollback
[ Best performance & battery]
8.10.25
Suggested firmware: 8.8.30->8.10.11 - Download from here
[ Latest update 8.11.22 ]
- Gapps updated
- icons updated
- more fixes and improvements
[ Previous changelog ]
- Mi AI machine learning program
- Optimization - Face unlocking speed
- Fix - no more flashing screen in the process of fingerprint unlocking
- New - Portrait mode in camera
- Compass Optimization
- new animation
- new baseband
- select network type only 3G and 4G
- Ability to hide applications
- Updated personal assistant
- New clipboard
- Up to 6 icons in the dock
- New icons
- Better battery management
- Updated Busybox
- centered clock option
- vertical clock option in lock screen
- new video wallpapers
- camera2api
- new GAPPS!
[ Download ]
https://yadi.sk/d/jdx3Q8MJgYogBg
Create your Yandex account to bypass the limit reached message.
NOTE: if you're dirty flashing, uninstall magisk BEFORE the first run to avoid bootloops. Then you can install it again afterwards. If you want to avoid ANY problem, always clean flash (wipe cache, dalvik, data)!
[ Miui dev firmware db ]
https://sourceforge.net/projects/xiaomi-firmware-updater/files/Developer/
[ Extras ]
KERNEL
For extra-smoothness you may give the Darkness Kernel a try. All settings default, just use FIOPS instead of CFQ. Backup your BOOT partition, to rollback in case something goes wrong.
SOUND
Being an audiophile, I guarantee you'll get the best audio quality using this amazing mod:
Ainur Sauron Mod - huge thanks to its creator! Compatible with Magisk 16 only for now.
GCAM
NEW! GoogleCamera_6.1.009.215420794-test3.apk
GoogleCamera-Pixel2Mod-Arnova8G2-V8.1.apk
In case you need to fix the Camera2 API and Install Gcam, here's another awesome thread!
Let see... I Switch Masik U 1.6 with Ms and will come back with an opinion.
Trimis de pe al meu MI 5 folosind Tapatalk
cdynu said:
Let see... I Switch Masik U 1.6 with Ms and will come back with an opinion.
Trimis de pe al meu MI 5 folosind Tapatalk
Click to expand...
Click to collapse
Looking forward to your review, how many hours SOT? Does it have Gesture Anywhere (not fullscreen gestures)? Stability?
New version [8.8.1] updated in OP.
Very stable. More than 5 hours SOT!
dev>null said:
New version [8.8.1] updated in OP.
Very stable. More than 5 hours SOT!
Click to expand...
Click to collapse
more language support?
gusry1313 said:
more language support?
Click to expand...
Click to collapse
At the moment it supports: English, German, Russian, Ucranian, Viet, Chinese, Japanese, Spanish...
dev>null said:
At the moment it supports: English, German, Russian, Ucranian, Viet, Chinese, Japanese, Spanish...
Click to expand...
Click to collapse
I need korean, in language pack... :crying:
I've already tried this Rom and I know it's a good Rom.
Therefore, I wanted to try it in Korean even more. :victory:
Great battery life. I only have one problem with MiuiMS: Spotify does not work properly! I can only listen to the music that is already saved in my playlist.
Stuck on boot animation. Help.
With this ad-blocking host file can't see any video on my trusted sites with any browser . ad-blocking host file are useful but not in this way...Can disable in any way ?
Sent from my MI 5 using Tapatalk
post removed
cdynu said:
With this ad-blocking host file can't see any video on my trusted sites with any browser . ad-blocking host file are useful but not in this way...Can disable in any way ?
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
The affected file is:
Code:
/system/etc/hosts
you can try flashing via TWRP the social-media-friendly, or revert to a clean host file using the unhost.zip, then apply the adblocker you prefer
Attachements added in OP!
Veelog said:
Stuck on boot animation. Help.
Click to expand...
Click to collapse
Same here, stuck on mi logo
gusry1313 said:
I need korean, in language pack... :crying:
I've already tried this Rom and I know it's a good Rom.
Therefore, I wanted to try it in Korean even more. :victory:
Click to expand...
Click to collapse
I think you have Korean but I could not recognize it
keceabiz said:
Same here, stuck on mi logo
Click to expand...
Click to collapse
If you wiped system you need to wipe data as well or you'll be stuck.
If you're upgrading from an oreo rom, you can try wipe just cache and dalvik.
Leave system and data untouched.
dev>null said:
If you wiped system you need to wipe data as well or you'll be stuck.
If you're upgrading from an oreo rom, you can try wipe just cache and dalvik.
Leave system and data untouched.
Click to expand...
Click to collapse
I deleted all, system, data and cache. And stuck in mi logo too.
I come from Masik 1.6
q52carad said:
I deleted all, system, data and cache. And stuck in mi logo too.
I come from Masik 1.6
Click to expand...
Click to collapse
First boot may take quite a while (20 mins or so)
If you already waited patiently...you can try restore your previous Masik and ONLY wipe cache and dalvik.
The good Rom I use from the first time comes with 10. I hope there is Indonesian on this ROM:Hai
dev>null said:
New version [8.8.1] updated in OP.
Very stable. More than 5 hours SOT!
Click to expand...
Click to collapse
Now that's promising, I've been using MIUI nougat + dragonXia (which I can get reliable 5+ SOT) because all MIUI 10 ROMS I've tried gave me like 3h SOT at most.
Is there no other way to download? This site is all in Russian which I don't understand.
Partha
Based on China firmware - oreo
Debloated and optimized for speed/battery/stability
• Round corners option (Setting->Display->Round corners)
• Extended power/reboot menu
• Basic Gapps included
• ad-blocking host file (you can revert to clean host or social media friendly flashing via TWRP one of the attachments)
• fast GPS lock
[ Latest update 8.9.20 ]
• centered clock option
• several bugs fixed
• new video wallpapers
• new clipboard
• new GAPPS!
- Magisk removed
[ Previous changelog ]
- Mi AI machine learning program
- Optimization - Face unlocking speed
- Fix - no more flashing screen in the process of fingerprint unlocking
- New - Portrait mode in camera
- Compass Optimization
- new animation
- new baseband !!!
- select network type only 3G and 4G
- Ability to hide applications
- Updated personal assistant
- New clipboard
- Up to 6 icons in the dock
- New icons
- Better battery management
- Updated Busybox
[ Download ]
https://yadi.sk/d/z14rXbvpXo-nBA
Create your Yandex account to bypass the limit reached message.
[ Extras ]
SOUND
Being an audiophile, I guarantee you'll get the best audio quality using this amazing mod:
Ainur Sauron Mod - huge thanks to its creator!
another custom rom thanks [emoji3][emoji106]
Gesendet von meinem MI 8 mit Tapatalk
---------- Post added at 02:24 PM ---------- Previous post was at 02:23 PM ----------
dude this is Miui 10 or 9.5? greetings
Gesendet von meinem MI 8 mit Tapatalk
Where is the link for Mi8? Only found Mi8SE
multi language ?
Where is the link for Mi8? Only found Mi8SE
where mi8 ?
Dude Xiaomi is pumping out different versions of Mi 8. It'd be really hard to keep up & cook ROMs for all of them :/
Besides, how's your ROM different from Xiaomi.eu's?
Mi8 version added in OP.
As stated in the title it's MIUI10
(android 8.1.0)
dev>null said:
Mi8 version added in OP.
As stated in the title it's MIUI10
(android 8.1.0)
Click to expand...
Click to collapse
add thai language Please.
Does Google Assistant works with this Rom?
Bug on GPS, it only works for few hours, and we need to restart the phone to make it works again (same bug with MiuiPro rom, Mi 8)
New version 8.9.20 added in OP
dev>null said:
New version 8.9.20 added in OP
Click to expand...
Click to collapse
Thanks for your work. I will give it a try. There is no Mi8 on Yandex.
where mi8?
Rom mi8 for link?
Miui MS 8.8.30
https://yadi.sk/d/tUCKplxL3ajgFm/MiUIms_MI8_8.8.30_8.1.0.zip
Why every MIUI 10 custom ROM for Mi 8 had an issue with GPS?
motherninja said:
Why every MIUI 10 custom ROM for Mi 8 had an issue with GPS?
Click to expand...
Click to collapse
Include MS 8.8.30?
does it have anti-rollback?
ascarnold said:
Bug on GPS, it only works for few hours, and we need to restart the phone to make it works again (same bug with MiuiPro rom, Mi 8)
Click to expand...
Click to collapse
Have you managed to find a fix for this annoyance?
Long thought to upload his own version of AOSP or not, but still decided.
So version of AOSP Pie with corrections in the device tree from Vartom.
Updated Selinux rules.
Added fixes to drm_hwcomposer.
Applied fixes preventing spam to the kernel log.
Saved device name as Pixel C.
drm_hwcomposer
Device tree
Download -r16
Changes
Corrections in wifi direct.
Cleaning the system from old libraries.
Download -r21
Changes:
-add aptx-hd codec.
Download -r34
Changes:
- Google security updates -> April 2019
- No kernel updates
Download -r35
Changes:
- Google security updates -> May 2019
- kernel updates
disabled kernel lowmemorykiller, enable MEMCG, switch lmkd to userspace.
Download -r39
Download -r42
Changes:
- Google security updates -> March 2020
- in kernel - battery fix/hack
Download AOSP 10-r32
Changes:
- Google security updates -> April 2020
- camera enable( but freeze after a minute of use).
- disabled touchbust for CPU and GPU.
Download AOSP 10-r33
AOSP updates will be in this thread
Full Treble and GSI system on the Dragon
Thanks but no gapps installation is allowed. Error text is about Android 7.1 which is installed.
Alex93917 said:
Thanks but no gapps installation is allowed. Error text is about Android 7.1 which is installed.
Click to expand...
Click to collapse
What gapps have you tried?
I did not have problems installing gapps.
Works great!!
Thank you!!
Mtp can export files ，but cannot import file
Good job
linzinan said:
Mtp can export files ，but cannot import file
Click to expand...
Click to collapse
Once again checked, everything works without errors.
If you have errors, make logs. syslog.
How is it going? Do you reccomend me to update from lineageos 15.1?
AlfreGarcia98 said:
How is it going? Do you reccomend me to update from lineageos 15.1?
Click to expand...
Click to collapse
I did not use lineageos 15.1/16.0, I used the official firmware all the time. After the first versions of Android 9 appeared, I use my versions of AOSP Pie firmware.
Vartom said:
I did not use lineageos 15.1/16.0, I used the official firmware all the time. After the first versions of Android 9 appeared, I use my versions of AOSP Pie firmware.
Click to expand...
Click to collapse
And what would you say? Is it better than stock? How is battery, multitasking going? I'm going to install pie but don't know what rom
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
AlfreGarcia98 said:
And what would you say? Is it better than stock? How is battery, multitasking going? I'm going to install pie but don't know what rom
Enviado desde mi ONEPLUS A5010 mediante Tapatalk
Click to expand...
Click to collapse
I wanted to say that I can not make the comparison proposed by you, because I did not use the firmware you specified.
In comparison with the official firmware, I did not find significant advantages for myself. Just an updated version of android. Autonomy in my opinion improved slightly by 1-1.5 hours. Multi-tasking remained at the same level.
thank you
+r34.
Vartom said:
+r34.
Click to expand...
Click to collapse
Thank you for keeping AOSP updated!!!
Sent from my Google Pixel 2 using XDA Labs
Amazing, thank you !!! Our Pixel C still updated
Sorry but I'm a bit lost. Wich one do you think is better, the discontinued pixel experience, this aosp or lineage? Thanks
Enviado desde mi Aquaris E5 mediante Tapatalk
thanks ! from nexus 9 to pixel c , i always use your ROM.
What this hwcomposer update in your OP relate to?
MrPhilo said:
What this hwcomposer update in your OP relate to?
Click to expand...
Click to collapse
I use a slightly modified updated https://github.com/vartom/android_external_drm_hwcomposer/commits/dragon-piev2
Vartom said:
I use a slightly modified updated https://github.com/vartom/android_external_drm_hwcomposer/commits/dragon-piev2
Click to expand...
Click to collapse
Thank you Vartom for your constant and important commitment for the development of Nexus 9 and Pixel C.
This AOSP rom is running really great.
However April version needs more time to load browser pages, Facebook pictures etc. compared to March rom and the previous one.
Maybe is better to perform a fresh install (i am running the rom since November)?
Someone know if restore wizard has been fixed in latest gapps?
Back in October-november you had to skip it and set everything from scratch.