Hi,
I have oppo N3 chinese. I want to install new firmware in my oppo n3 I go to recovery and wipe all data and cache then i thought it install new fw itself but it didnt and it stuck at x-bo logo. then I trying to install fw from sd card (downloaded fw) but at mid it says installation aborted !!!! my pc wont detect my phone as mass storage i just can install anything from external sd card but I couldnt find the right fw even i tried the custom fw but still no success.
Please tell me the right fw for my chinese oppo n3 which installed directly from sd card without any hassle. I really appreciate your help in this regard.
thank you
Danish
danish007 said:
Hi,
I have oppo N3 chinese. I want to install new firmware in my oppo n3 I go to recovery and wipe all data and cache then i thought it install new fw itself but it didnt and it stuck at x-bo logo. then I trying to install fw from sd card (downloaded fw) but at mid it says installation aborted !!!! my pc wont detect my phone as mass storage i just can install anything from external sd card but I couldnt find the right fw even i tried the custom fw but still no success.
Please tell me the right fw for my chinese oppo n3 which installed directly from sd card without any hassle. I really appreciate your help in this regard.
thank you
Danish
Click to expand...
Click to collapse
No one here to help?????????? I have tried to install nightly rom but it also says installation aborted
Related
OK, I'm super new to this forum, so be kind!
I've rooted my Xperia Arc on 4.04 and unlocked the bootloader. Everything was working fine and as expected. I decided to install Cyanogen Mod 9.1 stable - Anzu on to my device.
I was using the official guide which I followed the guide to the letter, except for step 6 where I used flashtool's fastboot mode as I had previously had problems using the command prompt.
I flashed the boot .img over using the fastboot toolbox then unplugged my phone and rebooted into CWM recovery and continued to follow the guide as written.
When I got to step 11: Choose .zip from SD card, I got E: Can't mount /sdcard/ .
I've looked through other threads about it, tried formatting the micro SD etc, all to no avail.
I hope this is in the right section and laid out in the right way, first post and all!
Thanks in advance.
Not too sure
I AM not too much sure about the problem but you can try the following(IF NOT ALREADY TRIED)
EITHER OF THEM
1. CHANGE YOUR SD-CARD
2. RE-INSTALL KERNELp)
3. RE-DOWNLOAD THE CM9 AND PUT IT ON THE SD-CARD
(ALSO CHECK WHETHER YOU CAN ACCESS MEMORY CARD FROM YOU ROM)
PLZ HIT THANKS IF I HELPED:good::good:
just download and use SDFormatter 3.0 to format your SD card
it works for me ...
if not , you must use Flash Tool to Flash Kernel & Offical Rom too
Arioman said:
you must use Flash Tool to Flash Kernel & Offical Rom too
Click to expand...
Click to collapse
So, if you have unlocked BL and different kernel you can return "official" just flashing an official ROM (like 4.1.B.0.587) ?
No problems of brick ? Only with OTA update ?
Thank you
Flashtool is designed to work with unlocked bootloader so flashing stock ftf is perfectly safe. Only OTA update can brick your phone.
At the the very sry in my poor langauge . I already unlock bootloader and update kernel new Doomlord project.now i have TWRP 2.7.0.1 when im install ROm Kitkat V3 http://forum.xda-developers.com/showthread.php?t=2605649. IT pass but after that the boot logo(look like nexus boot logo) are load for long time.i want to install another rom but ican't find the way to access my phone storage now i can use only TWRP pls help me how to access phone storage.
Theleon said:
At the the very sry in my poor langauge . I already unlock bootloader and update kernel new Doomlord project.now i have TWRP 2.7.0.1 when im install ROm Kitkat V3 http://forum.xda-developers.com/showthread.php?t=2605649. IT pass but after that the boot logo(look like nexus boot logo) are load for long time.i want to install another rom but ican't find the way to access my phone storage now i can use only TWRP pls help me how to access phone storage.
Click to expand...
Click to collapse
If you have a sdcard, copy a new, stable and working flashable firmware using your PC (You may need an MicroSD reader). Now in TWRP wipe cache/dalvik cache n' system, then flash the new firmware... easy.
..
f_u_006 said:
If you have a sdcard, copy a new, stable and working flashable firmware using your PC (You may need an MicroSD reader). Now in TWRP wipe cache/dalvik cache n' system, then flash the new firmware... easy.
Click to expand...
Click to collapse
i already have another rom in my PC but how i put them in my xperia?or i must have another accessories to connect Because im use xperia S it dont have sd card slot
I just bought a SM-P600 last night. Today I bought a 32G memory card for it. I could not move folders to the memory card because of the BS SELinux crap. What's the point of having external memory if you can't use it? So, I rooted the phone with no problem. Then I tried to install a SELinux Permissive kernel. That's when it got stuck at the SAMSUNG boot screen. I have tried everything that I can think of. I couldn't find a stock image to load via ODIN, so I installed TWRP Recovery and Android Revolution ROM...ROM says it installed fine, but still stuck on animation screen. And, now I can't get into TWRP.
So, can I do a complete reflash via ODIN? And if so, where do I get the stock ROM from? All of the ones that I've found are from other countries, and I can't even get one to download successfully....the downloads keep failing.
Can I install an earlier version, then update to current from there?
I have been flashing devices since the days of Windows Mobile, and have never soft bricked a device....
Please help...I hope that I don't have a $350 brick...
There should be at http://www.sammobile.com/firmwares/1/
Double check the firmware version, then choose from the long list there.
You just need to sign up for the free account to download the zip file, then extract it and use ODIN.
jhepoy said:
There should be at http://www.sammobile.com/firmwares/1/
Double check the firmware version, then choose from the long list there.
You just need to sign up for the free account to download the zip file, then extract it and use ODIN.
Click to expand...
Click to collapse
Thanks. I was able to recover using this thread:
http://forum.xda-developers.com/showthread.php?t=2719750
other problem
bradleyem said:
Thanks. I was able to recover using this thread:
http://forum.xda-developers.com/showthread.php?t=2719750
Click to expand...
Click to collapse
i have format sd card after that install via odin also stuck pls help me what i can do. system also formatted and now my sd card is empty and rooting and original instalment after also not working pls help
Hello,
Well, I was trying to install some new kernels but somehow my phone went into Boot Loop.
After that, I accidentally formatted my system and system memory. End Result: Their is nothing in my SD Card Right now.
I have searched in this forum and others for 2 days and still can not find a proper solution. Now, my laptop and computer does not recognize my device through adb device. I tried to insall stock rom through RUU but it gave an Boot Loader Version Error. However, I managed to install philz recovery and tried to mount memory but still no luck, I can not push files through adb as it can not recognize my device.
My CID is 02_001. I downloaded the matched CID RUU (RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed) but it didnt work. My image number of the phone (I dont know what is this actually) is like 4.xxxx and the image number of the RUU is 1.xxxx.
The HBOOT version is 1.72 S ON.
Can someone by someway, please give me the link of UPDATED RUU so that I can flash to stock rom or just help me to find a way to transfer custom rom to my phone memory so that I can flash a custom rom.
I was using VIPERX ROM 4.1.1,as the phone was draining alot of battery so over efficiently I tried to FLASH BRICKED KERNEL.
NOW I AM STUCK, HELPLESS and after losing the battle I am posting this thread.
PLEASE HELP ME WITH A SUITABLE ANSWER.
I would prefer to install stock rom but it wont work I guess because of the updated HBOOT version.
WaleedUQ said:
Hello,
Well, I was trying to install some new kernels but somehow my phone went into Boot Loop.
After that, I accidentally formatted my system and system memory. End Result: Their is nothing in my SD Card Right now.
I have searched in this forum and others for 2 days and still can not find a proper solution. Now, my laptop and computer does not recognize my device through adb device. I tried to insall stock rom through RUU but it gave an Boot Loader Version Error. However, I managed to install philz recovery and tried to mount memory but still no luck, I can not push files through adb as it can not recognize my device.
My CID is 02_001. I downloaded the matched CID RUU (RUU_ENDEAVOR_U_ICS_40_O2_UK_1.26.206.2_Radio_1.1204.90.13_release_251230_signed) but it didnt work. My image number of the phone (I dont know what is this actually) is like 4.xxxx and the image number of the RUU is 1.xxxx.
The HBOOT version is 1.72 S ON.
Can someone by someway, please give me the link of UPDATED RUU so that I can flash to stock rom or just help me to find a way to transfer custom rom to my phone memory so that I can flash a custom rom.
I was using VIPERX ROM 4.1.1,as the phone was draining alot of battery so over efficiently I tried to FLASH BRICKED KERNEL.
NOW I AM STUCK, HELPLESS and after losing the battle I am posting this thread.
PLEASE HELP ME WITH A SUITABLE ANSWER.
I would prefer to install stock rom but it wont work I guess because of the updated HBOOT version.
Click to expand...
Click to collapse
Flash Philz 5.15.9 recovery munt sd card and copy your rom to sd card after this install it and flash the boot.img from your rom archive
Thant said:
Flash Philz 5.15.9 recovery munt sd card and copy your rom to sd card after this install it and flash the boot.img from your rom archive
Click to expand...
Click to collapse
Ohkay, I tried the way you told me .
I have Philz Version 6.19.3 however now,
I am getting this error
asset failed: getprop('ro.product.device')=='endeavoru'
II getprop('ro.build.product')=='endeavoru' II
getprop('ro.product.board')=='endeavoru'
WaleedUQ said:
Ohkay, I tried the way you told me .
I have Philz Version 6.19.3 however now,
I am getting this error
asset failed: getprop('ro.product.device')=='endeavoru'
II getprop('ro.build.product')=='endeavoru' II
getprop('ro.product.board')=='endeavoru'
Click to expand...
Click to collapse
Man, @Thant trying to help and you skip his instructions?
Do what he said,flash philz 5.15.9.
WaleedUQ said:
Ohkay, I tried the way you told me .
I have Philz Version 6.19.3 however now,
I am getting this error
asset failed: getprop('ro.product.device')=='endeavoru'
II getprop('ro.build.product')=='endeavoru' II
getprop('ro.product.board')=='endeavoru'
Click to expand...
Click to collapse
witch Rom are you try to install?
EDIT: I found out that I can boot in fastboot and recovery mode. So flashing TWRP or stock recovery is no problem anymore. I currently have a phone without any firmware on it. TWRP also says that there is no ROM installed. So it is still a problem for me to flash any firmware. Can someone help me out with flashing stock firmware?
I have done the following steps. Note that I have extracted these images from B125 using the Huawei Update Extractor.
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot reboot
Then, I have put the B125 UPDATE.APP in a dload/ directory in the root of my SD card and tried to update by holding the three buttons, which results in this:
Code:
E:failed to mount /system (Invalid argument)
Formatting /cache...
Installation aborted.
cust copying files...
copy cust files successed!
Would really appreciate it if someone could help me out!
Hi there,
Today I made the most stupid mistake ever. I am trying to get back to B132 International by following this guide: http://forum.xda-developers.com/ascend-p6/general/how-to-downgrade-4-4-4-2-change-chinese-t2951566. However, I kept getting the following message: "Huawei sd card update fail...", which basically does not let me force flash any firmware. Knowing this, I installed TWRP and wiped everything, including internal storage. The only thing that I am left with is fastboot and the stock recovery, which also does not let me perform any force update. In addition, I cannot completely turn off the phone, because it boots to the Huawei splash screen on default. Is there anything I can do?
I could really appreciate the help.
Kind regards
I found out that there is something wrong with internal partitions. In specific, I tried installing B513, which results in the following error message:
Code:
E : Unable to mount '/data'
Does anyone know how I can solve this problem?
O_OniGiri said:
I found out that there is something wrong with internal partitions. In specific, I tried installing B513, which results in the following error message:
Code:
E : Unable to mount '/data'
Does anyone know how I can solve this problem?
Click to expand...
Click to collapse
Most of the problems with switching between diferent versions of the systemis that huawei forced us to make a middle step before update. So if you had kitkat and you want to get back to jellybean its a must step. The deal here is not that you bricked the phone but that you are using a wrong version to update. So before you went freestyle with the phone which android did you had on it and exactly did you do to get to this point?
Sent from my SM-G850F
tileeq said:
Most of the problems with switching between diferent versions of the systemis that huawei forced us to make a middle step before update. So if you had kitkat and you want to get back to jellybean its a must step. The deal here is not that you bricked the phone but that you are using a wrong version to update. So before you went freestyle with the phone which android did you had on it and exactly did you do to get to this point?
Sent from my SM-G850F
Click to expand...
Click to collapse
It was on Kitkat before I started flashing. So the first thing that I tried was to flash the Unicom 2.0 to downgrade back to Jellybean, however, that already gave the error that says: Huawei SD card update fail.... Then I have tried to flash many stock ROMs, which all gave the "Huawei SD card update fail..." error message. I have the feeling that it has to do with the VERLIST, because that part is never giving an OK.
Yesterday, I managed to get custom ROMs installed like CM11, Omni, and such. Unfortunately, none of them can connect to the carrier network, which makes it impossible to make phone calls So I really want to try flashing a stock ROM again, in the hope that it will fix the problem, but I can't for some reason.
Would really appreciate it if someone can help me out with this.
Why dont you go for the newest stock update? There is a chinese version of kitkat which is not released in europe but you can still flash it on the phone. The most usable is B708. Find it and try updating.
Sent from my SM-G850F
tileeq said:
Why dont you go for the newest stock update? There is a chinese version of kitkat which is not released in europe but you can still flash it on the phone. The most usable is B708. Find it and try updating.
Sent from my SM-G850F
Click to expand...
Click to collapse
Thank you for your reply. Unfortunately, there is no way for me to flash it. It gives me the same error: "Huawei SD card update fail..." :crying:
O_OniGiri said:
Thank you for your reply. Unfortunately, there is no way for me to flash it. It gives me the same error: "Huawei SD card update fail..." :crying:
Click to expand...
Click to collapse
Then this will be my last suggestion to try to help. Had seen before that some users pass through the error when putting the update file in the internal storage of the phone. So try that and see what happens. Same as on sd card, make a dload folder in root directory of the storage and put the update.app there and try to update with stock rec.
Sent from my SM-G850F