Develop Bugs

Just updated to bol1 need help

I recently updated to the new fw bol1 im just wondering if there is any way to root the phone or downgrade ?

Sebby000 said:
I recently updated to the new fw bol1 im just wondering if there is any way to root the phone or downgrade ?
Click to expand...
Click to collapse
This is from the Renegade Rom page on Android Development, IT WORKS EVEN IF YOU ARE ON BOL1.
Start with step 5
Proper flashing/upgrading to this ROM.. IF you're thinking about flashing OJ7 Roms, take note of the following:
First, Make a TWRP backup
Make a Titanium backup and Backup your Files to PC (i.e. DCIM/Downloads/SMS/TWRP) as you might have to factory full wipe if no boot after ODIN!! Yes no more pictures of your cat Fluffy
ODIN OJ7 Full Update/Firmware Click Here.
After returning to STOCK - bootup and go to software update and take ANY OTA
{{START HERE WITH A NEW PHONE}}{{START HERE IF YOU'RE ALREADY ON OI1}}
Go to Settings--->About Device--->Tap "Build Number" 10 times and you will unlock Developer Options---> unlock bootloader (See Attachment)
Flash THIS TWRP in Odin (compatible with 5.1.1 OFE and up) and you will be good to go with root+recovery on 5.1.1!!
Boot into TWRP; Wipe (Cache,Dalvik,System); Flash a RENEGADE OJ7-V1 Rom
Finally done!! Now you get all the juiciness of the Renegade work and any mods.
Depending on your install method... The initial boot WILL take up to 10 minutes on a clean install, SO PLEASE BE PATIENT!!!!
Please check post 2 and 3 if you're having issues or questions after flashing a Rom

veri nica, ty

Sebby000 said:
I recently updated to the new fw bol1 im just wondering if there is any way to root the phone or downgrade ?
Click to expand...
Click to collapse
Have you had success with getting root on OL1 following the steps suggested above?

exeleon said:
Have you had success with getting root on OL1 following the steps suggested above?
Click to expand...
Click to collapse
Yes, I installed Renegade rom over OL1 and it works without a problem after 4 days or so. You can even use GalaxyTools to get hotspot access, good battery life also.

thanks for the helps guys but i just wanted to root my phone to use HOTSPOT but i figure it out how to do it without root access just changed the APN SETTING AND ADD .dun at the end and it works

Root Marshmallow 6.0 Update

Hello I was able to easily root the newly released 6.0 update for the sprint galaxy s6.
First download
Cfroot for the G920F model
Download
Flash with Odin 3.10.6 or higher..
Wait for the script to finish etc and once the phone reboots, force the phone into download mode and flash the stock 6.0 recovery
Download
Then force the phone back into recovery mode and wipe cache then reboot phone back to system
Enjoy rooted 6.0 MM !
Props to the mighty Chainfire and his wizard skills

ok am i waiting when it attempts to boot recovery or just press the buttons to boot it into download again to re flash the stock recovery?

All we need now is twrp. I havent tried this root process yet.

weirdfate said:
ok am i waiting when it attempts to boot recovery or just press the buttons to boot it into download again to re flash the stock recovery?
Click to expand...
Click to collapse
after flashing cfroot you must wait until it finished the process..it will take a min...then after cfroot tells you it's done rooting the phone...you flash the stock recovery

Sunderwear said:
after flashing cfroot you must wait until it finished the process..it will take a min...then after cfroot tells you it's done rooting the phone...you flash the stock recovery
Click to expand...
Click to collapse
i must be doing it wrong then? it attempts to boot a recovery that is not seandroid enforcing last time i tried to install the custom recovery that was for the older firmware it stuck on that screen for ever and i needed to reflash my phone. just a little worried that its gonna get stuck there.
thank you for finding this root method

weirdfate said:
i must be doing it wrong then? it attempts to boot a recovery that is not seandroid enforcing last time i tried to install the custom recovery that was for the older firmware it stuck on that screen for ever and i needed to reflash my phone. just a little worried that its gonna get stuck there.
thank you for finding this root method
Click to expand...
Click to collapse
for me it was stuck in seandroid enforcing for like 1-2 mins...then it went to the cfroot screen

Sunderwear said:
for me it was stuck in seandroid enforcing for like 1-2 mins...then it went to the cfroot screen
Click to expand...
Click to collapse
yep
i waited then it went into cfroot
we got a dump of the stock recovery (im assuming thats what the other file is to flash) so im sure it wont be long till we get a custom recovery:good:

Confirmed, works for boost mobile 6.0.1 marshmallow.

Would TWRP 3.0.0 work with this or are we gonna have to wait for that update? Need my xposed modules for sure

We dont need a MM twrp....the current twrp will work just fine to flash a MM custom rom, someone just needs to make a rom.zip we flash it on top of LP and profit.

rafyvitto said:
We dont need a MM twrp....the current twrp will work just fine to flash a MM custom rom, someone just needs to make a rom.zip we flash it on top of LP and profit.
Click to expand...
Click to collapse
I also just realized that xposed won't work without a deodexed rom

122ninjas said:
I also just realized that xposed won't work without a deodexed rom
Click to expand...
Click to collapse
Can't we use flashify to install zip files? I've used xposed on stock ROMs before I thought.

will this work for 925p?

Awesome now i can mess with titanium backup. . Thanks Guess supersu is not working it says no su in the binary. Redid the steps i used odin 3.10.7 it didnt boot after the cfauto was flashed it actually booted into recovery is not seandroid enforcing. forced into download mode pushed down restarted again it went to the recovery is not seandroid enforcing screen. So i flashed the recovery cleared cache phone booted thought i was good to go nope lol. Also the same happened when i tried the twrp with odin but i had to flash the rom to get back up and running so heads up.

Guys I would definitely wait for a custom recovery. What if something happens and you have no backup?! Also, you need a deodexed ROM for Xposed to work anyway! This method would be good if all you care about is little stuff like AdBlocking.

you don't need deodexed rom anymore there is an exposed that work on 5.1.1 adn 6.0 but we just need a recovery to flash it.
but i agree i would wait to have a confirmed recovery for marshmallow

cyberone3 said:
you don't need deodexed rom anymore there is an exposed that work on 5.1.1 adn 6.0 but we just need a recovery to flash it.
but i agree i would wait to have a confirmed recovery for marshmallow
Click to expand...
Click to collapse
Prettttyy sure you need a deodexed ROM.

link below is the exposed i have been using on "stock" rom 5.1.1 and there is a 6.0 version i was on 5.1.1 no changes other than root
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
"Samsung made a lot of changes to ART without providing the sources, that's why it took a while to workaround some of their changes, more information here.
It supports Stock and close to stock Roms."

cyberone3 said:
link below is the exposed i have been using on "stock" rom 5.1.1 and there is a 6.0 version i was on 5.1.1 no changes other than root
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
"Samsung made a lot of changes to ART without providing the sources, that's why it took a while to workaround some of their changes, more information here.
It supports Stock and close to stock Roms."
Click to expand...
Click to collapse
I'm totally down to be a test dummy lol. Can anyone explain if flashify would be a replacement for recovery? I know the international folks used it to prevent certain things from tripping Knox, but at this point I'm pretty sure we all have tripped it by now

JoeFCaputo113 said:
Guys I would definitely wait for a custom recovery. What if something happens and you have no backup?! Also, you need a deodexed ROM for Xposed to work anyway! This method would be good if all you care about is little stuff like AdBlocking.
Click to expand...
Click to collapse
southernstyle said:
I'm totally down to be a test dummy lol. Can anyone explain if flashify would be a replacement for recovery? I know the international folks used it to prevent certain things from tripping Knox, but at this point I'm pretty sure we all have tripped it by now
Click to expand...
Click to collapse
flashify didn't work when i tried it wants twrp or cwm

Marshmallow Root/TWRP/Xposed!

Go here and follow how to root/TWRP/xposed MM: Click Here
Make sure OEM is checked!
Place tar in AP!
Flash root for MM
reboot
Reboot back into download mode
Flash twrp (Thanks to Beandip-Javier) and reboot in recovery
flash xposed zip in twrp
install xposed apk
done
Latest stable xposed MM: Download Here

There is recovery and xposed on the s6 ege plus sprint
I'am running xposed and twrp recovery on my s6 edge plus 64 gig. you need to go over to the sprint note 5 and developement and download those files and and they work perfectly hope i help and this mm rom is awesom.:good:

MonkeyAround said:
Go here and follow how to root MM: Click Here
Make sure OEM is checked!
Place tar in AP!
No recovery yet or xposed. I will be testing other ways to install xposed besides TWRP. I know flashfire doesnt work but I have a few other ideas.
Click to expand...
Click to collapse
Im also rooted, xposed and TWRP with no issues, i sent you a PM.

Hi I need some help here. I have the Sprint Galaxy s6 edge+ phone. Just got the Marshmallow upsate the other day. Im trying to root and want to flash that Note Update Fix. Now my question is this...will this Root my phone and NOT brick my phone, give me Root, and with Note 5 FIX will I be able to Flash any Note 5 Rom?
Sent from my SM-G928P using XDA Free mobile app

soft bricked - stuck at boot logo
I tried to flash in ODIN AP and am now stuck at the boot logo "Samsung Galaxy S6 edge+" screen. I'm able to get into download mode and have tried several times to reflash with no luck. I may have screwed up and forgot to select OEM before attempting. Can someone please help?

lostsoul77 said:
I tried to flash in ODIN AP and am now stuck at the boot logo "Samsung Galaxy S6 edge+" screen. I'm able to get into download mode and have tried several times to reflash with no luck. I may have screwed up and forgot to select OEM before attempting. Can someone please help?
Click to expand...
Click to collapse
Had the same issue...
Mine would boot but would stay on.
wiped
flashed tars
Be careful MM is touchie.
Even deleting normal apps you would of on JB can freeze up the system.
If you have tep your fine, just tell them after the last update your phone started rebooting. They replaced mine no hassle. Check out my post on how to get tep if your past the 60 days if you don't have it.
DO NOT USE SAMSUNG WARRANTY WITH TRIPPED KNOXS! ONLY TEP, SPRINT DOESN'T CARE.

Do we have a custom kernel yet for MM? Trying to debate rather to go MM or to stay on lollipop...

Anyone having issues with lag after installing xposed?

Just got a S6 Edge + for a real good price and it came with 6.0.1 PG1. Rooted, TWRP and hotspot, and it's all good so far.
Thanks.

I'm having a problem with xposed. Modules are doing nothing
Sent from my SM-G928P using XDA-Developers mobile app

simplkernel for g925t on 6.0.1

Hello, i tried rooting my galaxy s6 edge g925t, on 6.0.1, and was successful but than tried to install twrp recovery and the phones bricks.. Later i get into the downloading mode and reinstall the stock ROM, than later i reinstall the root(CF-Auto-Root-zeroltetmo-zeroltetmo-smg925t.zip) and was still successful at the root. I figure out i need a custom kernel that will work for my android version, i cant find any kernels that will work for my 6.0.1. i still have a simplkernel for lollipop but i know that one wont work. Is there anyone that can help me find a simplkernel for my model phone and android version!

Never mind
I found a twrp/kernel recovery online and it worked, its all good now!!

I'm still using stock kernel which has no issues like in call audio or wifi problems.
only twrp that worked fine was Arter97 modified version.
as far as root rooted with version 2.71 Beta.

micahtjosaas said:
I found a twrp/kernel recovery online and it worked, its all good now!!
Click to expand...
Click to collapse
Link to a Tmobile supported SM-G925T 6.x Kernel???
Already have setup rooted working. I want to experiment with International versions. me thinks I still need a TMobile 6.x kernel to work since I already tried and wouldn't boot up. Nandroid back to my stock rooted TMobile Smartswitch installed version works fine.

micahtjosaas said:
I found a twrp/kernel recovery online and it worked, its all good now!!
Click to expand...
Click to collapse
Please describe your fix with a link please.
Thanks!

micahtjosaas said:
I found a twrp/kernel recovery online and it worked, its all good now!!
Click to expand...
Click to collapse
which kernel are u using

So you'll tell us you got it to work and you'll tell us you successfully found a TWRP and kernel but you don't give us any way to find the programs so that we can use them as well which is the point of this website as far as I'm concerned glad your phone works but this post is useless...

I screwed up. Help getting back to 5.1.1!????

So I got bored today. I decided to give MM another go. BIG mistake. I can't get back to lollipop. I made a TWRP backup but restoring from it gets stuck on the Samsung screen. It just says Kernel is not seandroid enforcing. I installed MM via odin and it must of upgraded the boot loader because now when I try to flash 5.1.1 via odin I get sw rev check fail device 4 binary 3 on my phone. HELP! I can't even get MM past the "LTE Plus" boot screen on MM. Any advice would be wonderful! Otherwise my s6 is a nice paperweight and I'm stuck without a phone

AFAIK, if you are on one of the 3-4 latest MM builds, you CANNOT go back to 5.1.1 anymore.
Samsung added the anti-downgrade function to those builds already.

You cannot downgrade as yaibakt pointed out. After installing the latest MM version via Odin, boot to stock recovery and wipe all user data. It will boot then.
Sent from my SM-G920P using Tapatalk

@Poebat, may I offer to help a bit? You won't be able to roll back, but you'll feel a whole lot better about what you have.
Follow my guide here to get up to the latest firmware, rooted and with TWRP: https://forum.xda-developers.com/sp...uide-links-files-update-root-restore-t3366862
Then install the latest BiggDaddy ROM: https://forum.xda-developers.com/sp...pment/biggdaddypi3grace-ux-rom-6-0-1-t3484252
Play around with the many options. It is a great ROM.

yaibakt said:
AFAIK, if you are on one of the 3-4 latest MM builds, you CANNOT go back to 5.1.1 anymore.
Samsung added the anti-downgrade function to those builds already.
Click to expand...
Click to collapse
Damn. Last time I tried I was able to downgrade. I assumed I would be able to do the same with the latest. I'm a genius. Thanks for the heads up.

koop1955 said:
@Poebat, may I offer to help a bit? You won't be able to roll back, but you'll feel a whole lot better about what you have.
Follow my guide here to get up to the latest firmware, rooted and with TWRP: https://forum.xda-developers.com/sp...uide-links-files-update-root-restore-t3366862
Then install the latest BiggDaddy ROM: https://forum.xda-developers.com/sp...pment/biggdaddypi3grace-ux-rom-6-0-1-t3484252
Play around with the many options. It is a great ROM.
Click to expand...
Click to collapse
Will do! I'd like to have my phone working again