Hi all,
I appear to have a strange issue. When I had the Nexus 6p there was no issue whatsoever, I then moved to the s7 edge and for some reason when either the battery dies or when the phone disconnects from the phone it forgets certain apps like unified remote and watchface premium resetting all my watch faces over and over again.
Anyone else had this issue? Or similar issues? Any thoughts?
Thanks,
Could mods move this to the general section so it can get more views?
I'm using Watchmaker Pro faces on my Watch Classic running stock MM and I've never lost the selected face after turning off the watch or my S7 Edge.
But I've never let the watch discharge completely or voluntarily unpaired the Bluetooth connection with the phone.
Related
Hi everyone,
The music controls weren't working on my moto 360, so I wiped the watch. Now, the apps won't install on the watch ; it installs correctly on my phone but nothing goes on the watch. Already wiped three times and uninstall/reinstall everything on my phone. I'm using a Galaxy S5.
Anyone has an idea ?
Thanks
You can rescync All apps from Android wear. However, it doesn't show the sync progress but give it some time and it will do it in the background. Your Moto360 will drain some batt, so have your charger nearby.
I've updated to the new Connect app, and the app on the phone works fine, but none of the new features will sync to the watch. I've tried restarting the watch, resetting the watch, uninstalling and reinstalling both Android Wear and the update to the Connect app (on a Moto X, so I can't fully uninstall Connect).
Anybody seeing this? Maybe I need to do all that in a particular order?
I am having the exact same issue. Using a Moto X 2014. The app updated and works on thr phone but none of the new features will sync
In the same boat as well...
Same with me. Running lg g3. I've read the issue is the phone that your 360 is connected with. Some people paired their 360 with a different phone and then the new watch faces finally appeared. But once they would try to pair their 360 back to their current phone, the watch faces would still not show.
No problem here on my Nexus 5
you won't see anything different on the phone after the motorola connect update in terms of the Body app. However, if you go into the start menu on the watch itself, you should see moto body features such as calories, steps, heart activity, and heart rate. hope this is helpful.
Won't work on my S4 either, tried everything. Bummer!!!
Works fine with my s4. Try restarting phone?
ditto
Same issue on my moto x 2013. Can't do anything to get them to show up. Done everything short of a hard reset on the phone
same here, nexus 5 on lollipop
I had the same problem. I use it with my Nexus 5 running an AOSP Lollipop Build.
Solved it by uninstalling the Motorola Connect App and reinstalling. After that everything new appeared on the 360.
Hope this helps :good:
mc-paulo said:
I had the same problem. I use it with my Nexus 5 running an AOSP Lollipop Build.
Solved it by uninstalling the Motorola Connect App and reinstalling. After that everything new appeared on the 360.
Hope this helps :good:
Click to expand...
Click to collapse
Many thanks this worked for me. I was dreading having to do a factory reset.
Edbogue
I've had the zenwatch for almost 2 weeks and i will be keeping it. That being said here is a heads up, i found that using the app facer to make watch faces and using wear mini launcher together causes a good bit of lag when performing any action on the watch. to remedy this issue i downlaoded watch maker and low behold the lag went away. so if anyone is haven a lag issue check into what apps you are use to make your watch faces and also what launcher u have choosen. hope you guys find this helpfull .
So, did you uninstall wear mini launcher ?
tonyguy2000 said:
So, did you uninstall wear mini launcher ?
Click to expand...
Click to collapse
no i switched to watch maker it works better with min launcher
I've actually had this happen a number of times and I'm not sure why. It doesn't seem to have a consistent cause. Usually it'll be when I install a new app or something, but it's happened other times as well, but it doesn't happen consistently with one app or another. For me, the lag shows up as the screen basically being frozen without being able to control anything. Eventually, it will unfreeze and I'll usually see the mini-launcher screen, but even a restart with the back button won't solve the freeze.
For me, it was worse when I had Mini Launcher installed, but it still happens occasionally without it. I no longer have either Facer or Watchmaker installed, either. I'm using the Weather Watch Face, though. I wonder if it has something to do with watch faces in general?
When I was using Mini Launcher, apps would almost never launch the first time I tapped on them. It would go back to the watch face and freeze for a few seconds, and force me to go back to Mini Launch and tap again. Without Mini Launcher, this still happens occasionally from the built-in Start... item, but much less frequently.
I have all 3 installed and it doesn't seem to lag too bad. I guess I don't interact with it the same as I would with a phone so it doesn't bother me at all. Whenever I get a card it interacts with it seamlessly, that's about as much as I need it to do
xmeatizmurderx said:
I have all 3 installed and it doesn't seem to lag too bad. I guess I don't interact with it the same as I would with a phone so it doesn't bother me at all. Whenever I get a card it interacts with it seamlessly, that's about as much as I need it to do
Click to expand...
Click to collapse
Interacting with cards hasn't been a problem for me, either, it's launching an app that's not already running that seems to be the issue. Sometimes (or almost every time for me with Mini Launcher), the new app doesn't come to the foreground, and the watch appears to hang for several seconds. It then has to be launched a second time to become visible.
I've definitely seen it lag like that. Hopefully it's just a software issue with android wear being so new and updates will help fix that. It's got plenty of processor and ram torrun the tiny apps no problem
I noticed a considerable amount of lag while using mini launcher. To the point that I didn't even want to show off the watch to other people because it made it seem terrible. Major difference since uninstalling, lag free now. I also use Watch Maker and a few Play Store watchfaces with no lag issues.
Wish we could move the start menu to the first selection on the tap screen instead of the last, then I really wouldn't care about a separate launcher.
1+ for deleting mini launcher. I like the app but its so dam laggy. As far as Watch Maker app works at times for me so I deleted that as well. I was using Facer until I ran into Intellicom which seems to be very easy to use and no change in my battery life.
I think this is more of a symptom of using a single core A7 processor. I imagine all of the governors and IO schedules are set up for battery life so that probably doesn't help either. It might just be coincidence that you are running something while a background task is also running.
So, I just got a new phone, Galaxy S8+. After doing the factory reset and pairing with my phone, I'm not seeing any new watch faces or anything appear in the Wear app. No way to even change stock watch faces in the Wear app. The watch is just sitting on the dock with the battery draining. Anyone see this before and have a fix for this? Or does the initial sync just take for-freaking-ever?
Bump
I recently started wearing my galaxy watch that I've had for a couple years and I have a rooted stock OnePlus 9 pro on the latest firmware and version and the watch initially connected to my phone and did the whole set up, got notifications and everything then I opened the wearable app and it's now giving me an issue with needing to update the watch plugin but when it goes to the playstore it only gives me the option to uninstall is the update only for Galaxy phones? Anyone know of a way to fix it?