Update modified 5.0.2 Euro firmware firmware on stock status 5.0.2 HTC Desire d820n - Desire 820 Q&A, Help & Troubleshooting

A method for producing a flow 5.0.2 5.0.2 with subsequent update to 6 mm 100% process working. install stock rekaveri , If you have unlocked bootloader , relock it, рut it on your external sd card not decompress zip archives(0PFJIMG.zip), boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons.
For Qualcomm Snapdragon MSM8939 -- Snapdragon 615 Qualcomm 8-ядерный 64-бит процессор ядра Cortex A53 4x1.5 ГГц и 4х1 ГГц Adreno 405 HTC Desire 820n 1-sim. for Europe Firmware https://yadi.sk/d/KYcWwUH4raUxm stock rekaveri 5.0.2 https://yadi.sk/d/Jv1cy3EqrTuba For locked bootloader https://yadi.sk/d/C5ZYzOL-k4dco

when I lock the bootloader? after uploading Stock recovery? and aupgrade firmware?
1 .. ?? stock recovery
2 .. ?? aupgrade firmware 0PFJIMG.zip
3 .. ?? Lock bootloader
4 .. ?? later upgrade marshmallow?
Yes ?
Please reply

MrSmokepl said:
when I lock the bootloader? after uploading Stock recovery? and aupgrade firmware?
1 .. ?? stock recovery
2 .. ?? aupgrade firmware 0PFJIMG.zip
3 .. ?? Lock bootloader
4 .. ?? later upgrade marshmallow?
Yes ?
Please reply
Click to expand...
Click to collapse
1 .. ?? stock recovery
2 .. ?? Lock bootloader
3 .. ?? aupgrade firmware 0PFJIMG.zip
4 .. ?? later upgrade marshmallow?

vuk1963 said:
1 .. ?? stock recovery
2 .. ?? Lock bootloader
3 .. ?? aupgrade firmware 0PFJIMG.zip
4 .. ?? later upgrade marshmallow?
Click to expand...
Click to collapse
the app to lockbootloader needs usb debugging enabled and my phone is dead can i flash the stock recovery and the firmware then lock the bootloader???

egypt heart said:
the app to lockbootloader needs usb debugging enabled and my phone is dead can i flash the stock recovery and the firmware then lock the bootloader???
Click to expand...
Click to collapse
No need to lock the bootloader!!!You can you unlock the program Android Debug Bridge for fast usb

vuk1963 said:
No need to lock the bootloader!!!You can you unlock the program Android Debug Bridge for fast usb
Click to expand...
Click to collapse
ok when flashing the stock recovery and booting into it it gives red triangle!! cant boot to recovery to flash the rom
and when i tried to flash twrp recoveryy and flash the rom with it it said"Failed"

You are a life saver . thx ! it works !

egypt heart said:
ok when flashing the stock recovery and booting into it it gives red triangle!! cant boot to recovery to flash the rom
and when i tried to flash twrp recovery and flash the rom with it it said"Failed"
Click to expand...
Click to collapse
(and when i tried to flash twrp recovery and flash the rom with it it said"Failed") you can not flash the file 0PFJIMG.zip in TWRP,you must rename file firmware in 0PFJIMG.zip,put 0PFJIMG.zip on the memory card,install stock rekaveri (https://yadi.sk/d/adKlVpC8rkcU9) ,lock the bootloader (https://yadi.sk/d/KYcWwUH4raUxm) ,enter the bootloader НВOOT,0PFJIMG.zip should begin to be installed

vuk1963 said:
(and when i tried to flash twrp recovery and flash the rom with it it said"Failed") you can not flash the file 0PFJIMG.zip in TWRP,you must rename file firmware in 0PFJIMG.zip,put 0PFJIMG.zip on the memory card,install stock rekaveri (https://yadi.sk/d/adKlVpC8rkcU9) ,lock the bootloader (https://yadi.sk/d/KYcWwUH4raUxm) ,enter the bootloader НВOOT,0PFJIMG.zip should begin to be installed
Click to expand...
Click to collapse
ok i got it now but still the probolem my phone is dead..cant enable usb debugging to lock the bootloader
im sorry for so much asks but i realy need this

to flash twrp recovery(https://yadi.sk/d/ZybWB0jpr4qtc) then flash the custom 5.0.2 https://yadi.sk/d/dEwiblxjmieVS then when download and install the 5.0.2 and the phone will boot into the system,follow (you must rename file firmware in 0PFJIMG.zip,put 0PFJIMG.zip on the memory card,install stock rekaveri (https://yadi.sk/d/adKlVpC8rkcU9) ,lock the bootloader (https://yadi.sk/d/KYcWwUH4raUxm) ,enter the bootloader НВOOT,0PFJIMG.zip should begin to be installed)

vuk1963 said:
to flash twrp recovery(https://yadi.sk/d/ZybWB0jpr4qtc) then flash the custom 5.0.2 https://yadi.sk/d/dEwiblxjmieVS then when download and install the 5.0.2 and the phone will boot into the system,follow (you must rename file firmware in 0PFJIMG.zip,put 0PFJIMG.zip on the memory card,install stock rekaveri (https://yadi.sk/d/adKlVpC8rkcU9) ,lock the bootloader (https://yadi.sk/d/KYcWwUH4raUxm) ,enter the bootloader НВOOT,0PFJIMG.zip should begin to be installed)
Click to expand...
Click to collapse
ok the backup is workingbut reboots alot.....so i put the zip file in sd and when locked bootloader and went to Hbot it says
!Image update Fail!
Main Version is older
Device halted due to large image update press power to reboot....Any Solution?

guys help Plz aftr doing like instructions and going to Hboot it says Imaage Update Failed..Main Version is older...Device halted due to large image update......and the backup from the provided link Reboots heavily idk why any help plz :/

Hello
I have a problem, when I enter in hboot, 0PFJIMG.zip begin installation and it says "Wrong CID", My CID is HTC__247, i need bouygues stock rom please help me !

egypt heart said:
guys help Plz aftr doing like instructions and going to Hboot it says Imaage Update Failed..Main Version is older...Device halted due to large image update......and the backup from the provided link Reboots heavily idk why any help plz :/
Click to expand...
Click to collapse
Which phone model (more !!!) What version of firmware

Horakle said:
Hello
I have a problem, when I enter in hboot, 0PFJIMG.zip begin installation and it says "Wrong CID", My CID is HTC__247, i need bouygues stock rom please help me !
Click to expand...
Click to collapse
Which phone model (more !!!) What version of firmware

Sorry,
I have HTC desire 820n and I do your tutorial actually i have your custom 5.0.2
Others informations :
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 01.01.010_U10305041_08.01.51015
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.10.1020.5
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: a51_ul
INFOplatform: hTCBmsm8939
INFOmodelid: 0PFJ40000
INFOcidnum: HTC__247
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: da038a09
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOmfg-name: 1001

Horakle said:
Sorry,
I have HTC desire 820n and I do your tutorial actually i have your custom 5.0.2
Others informations :
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 01.01.010_U10305041_08.01.51015
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 2.10.1020.5
INFOversion-misc: PVT SHIP S-ON
INFOserialno:
INFOimei:
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: a51_ul
INFOplatform: hTCBmsm8939
INFOmodelid: 0PFJ40000
INFOcidnum: HTC__247
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: da038a09
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOmfg-name: 1001
Click to expand...
Click to collapse
1. you must rename file firmware in 0PFJIMG.zip,2.рut it on your external sd card not decompress zip archives(0PFJIMG.zip),3.install stock rekaveri 5.0.2,4.If you have unlocked bootloader, relock it.You have done all this?

Yes, but actually when I want to flash recovery I have this error " FAILED (remote: signature verify fail) "

Horakle said:
Yes, but actually when I want to flash recovery I have this error " FAILED (remote: signature verify fail) "
Click to expand...
Click to collapse
1. you need to format the SD memory card.2. You are doing so?: boot into bootloader with volume - and power button,HBOOT. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons.

I tried but it always tells me wrong CID
My phone is not S-OFF I need a firmware for a CID HTC__247

Related

[Q] Pls help - HTC One X stuck on quietly brilliant screen and won't restore

Hi Friends,
First things first - I have looked up and tried several things that other folks facing similar issues have tried. None of it has worked for me.
Coming to the problem now.
It all began when I decided to unroot and install a custom ROM on my stock HTC One X and downloaded a stable build from http://wiki.cyanogenmod.org/w/Install_CM_for_endeavoru.
I followed the tutorials and unlocked my device and started off with CWM recovery 5.8.2.7. Did some experiemenation with backup and recovery. So far, so good.
I decided to use the 4.4 ROM and as per some information available it needed me to update to CWM 6.0.4.8. I did so but when I tried to go in recovery, the screen went blank. Tried it multiple times without luck.
Then I switched over to TWRP 2.7.1 and used it to install the cm-11-20141112-SNAPSHOT-M12-endeavoru.zip. It failed with status 7. Assert checks on bootloader ver failed (as per checks it would need anything 1.28 or higher). I am on hboot 1.12. I extracted the boot.img from the rom zip and flashed it from fastboot. It showed no change in hboot version (maybe this is where I faulted). It still won't install rom zip as I would expect.
Now the phone won't go beyond "Quietly Brilliant" screen on power on. Recovery to saved backup says its successful but it still gets stuck at same screen on reboot.
Would appreciate help and pointers from anyone who could help.
Thanks in advance,
Kunal
koolvirgo said:
Hi Friends,
First things first - I have looked up and tried several things that other folks facing similar issues have tried. None of it has worked for me.
Coming to the problem now.
It all began when I decided to unroot and install a custom ROM on my stock HTC One X and downloaded a stable build from http://wiki.cyanogenmod.org/w/Install_CM_for_endeavoru.
I followed the tutorials and unlocked my device and started off with CWM recovery 5.8.2.7. Did some experiemenation with backup and recovery. So far, so good.
I decided to use the 4.4 ROM and as per some information available it needed me to update to CWM 6.0.4.8. I did so but when I tried to go in recovery, the screen went blank. Tried it multiple times without luck.
Then I switched over to TWRP 2.7.1 and used it to install the cm-11-20141112-SNAPSHOT-M12-endeavoru.zip. It failed with status 7. Assert checks on bootloader ver failed (as per checks it would need anything 1.28 or higher). I am on hboot 1.12. I extracted the boot.img from the rom zip and flashed it from fastboot. It showed no change in hboot version (maybe this is where I faulted). It still won't install rom zip as I would expect.
Now the phone won't go beyond "Quietly Brilliant" screen on power on. Recovery to saved backup says its successful but it still gets stuck at same screen on reboot.
Would appreciate help and pointers from anyone who could help.
Thanks in advance,
Kunal
Click to expand...
Click to collapse
give me the result from command fastboot getvar version-main. And after this we will see haow to upgrade your hboot you are with too low hboot version
Thant said:
give me the result from command fastboot getvar version-main. And after this we will see haow to upgrade your hboot you are with too low hboot version
Click to expand...
Click to collapse
Hi,
Thanks pal ! Here is the output of fastboot getvar version-main
version-main: 0.0.0.178434
thanks,
Kunal
Ok.....so as I mentioned in my first post, I did play around with CWM 5.8.2.7 at the beginning and had made a backup. So I flashed CWM again and was able to restore my device.
Now, I need to update to CM11 ROM and would need help with that please. I guess what I already have is there in the first post I put in this thread. Here's the dump of fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.12.2000
(bootloader) version-baseband: 2.1204.135.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 0.0.0.178434
(bootloader) serialno: HT22WW100191
(bootloader) imei: 3591*********75
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4217mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
thanks again in advance,
Kunal
koolvirgo said:
Ok.....so as I mentioned in my first post, I did play around with CWM 5.8.2.7 at the beginning and had made a backup. So I flashed CWM again and was able to restore my device.
Now, I need to update to CM11 ROM and would need help with that please. I guess what I already have is there in the first post I put in this thread. Here's the dump of fastboot getvar all
(bootloader) version: 0.5a
(bootloader) version-bootloader: 1.12.2000
(bootloader) version-baseband: 2.1204.135.20
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 0.0.0.178434
(bootloader) serialno: HT22WW100191
(bootloader) imei: 3591*********75
(bootloader) product: endeavoru
(bootloader) platform: HBOOT-T30S
(bootloader) modelid: PJ461****
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4217mV
(bootloader) devpower: 100
(bootloader) partition-layout: None
(bootloader) security: off
(bootloader) build-mode: ENG
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: None
(bootloader) hbootpreupdate: 2
(bootloader) gencheckpt: 0
thanks again in advance,
Kunal
Click to expand...
Click to collapse
No problem you are S-OFF Download this RUU relock your bootloader or if it's locked leave it locked and run the RUU this will upgrade your phone to 3.14.401.31 then upgrade to latest 4.18.401.4 after this you can unlock the bootloader and flash custom recovery latest TWRP or CWM or Philz and flash what you want
Thant said:
No problem you are S-OFF Download this RUU relock your bootloader or if it's locked leave it locked and run the RUU this will upgrade your phone to 3.14.401.31 then upgrade to latest 4.18.401.4 after this you can unlock the bootloader and flash custom recovery latest TWRP or CWM or Philz and flash what you want
Click to expand...
Click to collapse
Hi Thant,
Thanks for your tip. I will give this a try (though I will be able to try it out someone later this week only and provide update how it went).
Having said that, I have one question though - the link to RUU you specified looks like for unlocked HTC Europe version. I'm from India and I found that there might be one with same radio for India here.
Not doubting your advice, but just want to know what is the basis for knowing what RUU one must use ?
Also, can I choose the one for India (RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_India_3.14.720.24_Radio_5.1204.162.29) ?
thanks,
Kunal
koolvirgo said:
Hi Thant,
Thanks for your tip. I will give this a try (though I will be able to try it out someone later this week only and provide update how it went).
Having said that, I have one question though - the link to RUU you specified looks like for unlocked HTC Europe version. I'm from India and I found that there might be one with same radio for India here.
Not doubting your advice, but just want to know what is the basis for knowing what RUU one must use ?
Also, can I choose the one for India (RUU_ENDEAVOR_U_JB_45_S_hTC_Asia_India_3.14.720.24_Radio_5.1204.162.29) ?
thanks,
Kunal
Click to expand...
Click to collapse
yes if you want, most of the people like European version not Asian. It is your choice you are S-OFF and you can flash what you want on your phone. And the radio is the same
Thant said:
yes if you want, most of the people like European version not Asian. It is your choice you are S-OFF and you can flash what you want on your phone. And the radio is the same
Click to expand...
Click to collapse
Hi Thant,
I did try the RUU you told me to use but update failed with error 159.
There are some RUUs for Indian models at http://www.androidruu.com/?developer=Endeavor and http://forum.xda-developers.com/showthread.php?t=2189048 but none for JB.
I have provided the getvar dump earlier but can't seem to find what I need to use (sorry for being a noob here). Please suggest what I can do more.
Merry Christmas and a Happy New Year.
thanks,
Kunal
koolvirgo said:
Hi Thant,
I did try the RUU you told me to use but update failed with error 159.
There are some RUUs for Indian models at http://www.androidruu.com/?developer=Endeavor and http://forum.xda-developers.com/showthread.php?t=2189048 but none for JB.
I have provided the getvar dump earlier but can't seem to find what I need to use (sorry for being a noob here). Please suggest what I can do more.
Merry Christmas and a Happy New Year.
thanks,
Kunal
Click to expand...
Click to collapse
are you charge your phone before run the RUU are you reloack the bootloader before run the RUU???
Thant said:
are you charge your phone before run the RUU are you reloack the bootloader before run the RUU???
Click to expand...
Click to collapse
Yes, I did both !!
koolvirgo said:
Yes, I did both !!
Click to expand...
Click to collapse
Are your phone say Endeavoru PVT in bootloader or say Endeavoru XE?
I have the same issue, I used the WinDroid toolkit but somehow I got stuck in the boot. I can go in recovery. My phone says endeavoru pvt. I also have the S-on.
INFOversion: 0.5a
INFOversion-bootloader: 1.72.0000
INFOversion-baseband: 5.1204.167.31
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.18.401.4
INFOserialno: HT23NW107620
INFOimei: 359188041361783
INFOproduct: endeavoru
INFOplatform: HBOOT-T30S
INFOmodelid: PJ4610000
INFOcidnum: HTC__405
INFObattery-status: good
INFObattery-voltage: 3660mV
INFOdevpower: 3
INFOpartition-layout: None
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: None
INFOhbootpreupdate: 2
INFOgencheckpt: 0
Click to expand...
Click to collapse
What I have to do?? Thanks for the help you are saving me!!
lollerz46 said:
I have the same issue, I used the WinDroid toolkit but somehow I got stuck in the boot. I can go in recovery. My phone says endeavoru pvt. I also have the S-on.
What I have to do?? Thanks for the help you are saving me!!
Click to expand...
Click to collapse
Okay I solved my problem, my issue was the boot.img that was different from the one inside the custom rom! Hope this helps
Thant said:
Are your phone say Endeavoru PVT in bootloader or say Endeavoru XE?
Click to expand...
Click to collapse
It says Endeavoru XE
koolvirgo said:
It says Endeavoru XE
Click to expand...
Click to collapse
Than this is bad news try to download ICS Asian RUU and restore it, then try to update to latest Asian rom if this not work you maust to update your hboot manualy the XE variant have a lot of problems with the update but first try to run ICS Asian RUU then check for update and then update Try this RUU
Thant said:
Than this is bad news try to download ICS Asian RUU and restore it, then try to update to latest Asian rom if this not work you maust to update your hboot manualy the XE variant have a lot of problems with the update but first try to run ICS Asian RUU then check for update and then update Try this RUU
Click to expand...
Click to collapse
Hi Thant,
I have not yet tried tried the ICS RUU you suggested. But before I go ahead, here's some more info.
The Android version, HTC Sense version both say "Protected"
Software number is "Unknown"
HTC SDK API level is 4.23
Kernel is 2.6.39.4-g7ecc196
Baseband version is 2.1204.135.20
Build no. is 0.1.0.0 (20130509 EndeavorU_Generic_WWE#178434)
Boot loader says -
ENDEAVORU XE ENG S-OFF RH
CID-11111111
HBOOT- 1.12.2000 (PJ461****)
CPLD-None
MICROP-None
RADIO-2.1204.135.20
Now, should I go ahead with the ICS RUU ?
How do I know what Android version I'm on ? Why would it say protected ? Any command I can fire from fastboot/adb ?
[getvar says (bootloader) version-main: 0.0.0.178434]
Thanks for all your time & help,
Kunal
koolvirgo said:
Hi Thant,
I have not yet tried tried the ICS RUU you suggested. But before I go ahead, here's some more info.
The Android version, HTC Sense version both say "Protected"
Software number is "Unknown"
HTC SDK API level is 4.23
Kernel is 2.6.39.4-g7ecc196
Baseband version is 2.1204.135.20
Build no. is 0.1.0.0 (20130509 EndeavorU_Generic_WWE#178434)
Boot loader says -
ENDEAVORU XE ENG S-OFF RH
CID-11111111
HBOOT- 1.12.2000 (PJ461****)
CPLD-None
MICROP-None
RADIO-2.1204.135.20
Now, should I go ahead with the ICS RUU ?
How do I know what Android version I'm on ? Why would it say protected ? Any command I can fire from fastboot/adb ?
[getvar says (bootloader) version-main: 0.0.0.178434]
Thanks for all your time & help,
Kunal
Click to expand...
Click to collapse
You are S-OFF you can run any RUU but your problem is that your phone say XE not PVT the XE edition have problem with the update hboot
Thant said:
You are S-OFF you can run any RUU but your problem is that your phone say XE not PVT the XE edition have problem with the update hboot
Click to expand...
Click to collapse
Hi Thant,
I tried it and failed Needless to say I made sure all the prerequisites were met.
Can you please tell me how to manually update hboot ?
thanks,
Kunal
koolvirgo said:
Hi Thant,
I tried it and failed Needless to say I made sure all the prerequisites were met.
Can you please tell me how to manually update hboot ?
thanks,
Kunal
Click to expand...
Click to collapse
fastboot oem lock - relock the bootloader
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip (AGAIN)
fastboot reboot-bootloader
fastboot flash unlocktoken Unlock_code.bin
then like normal flash recovery and then rom
You can find firmware.zip from OTA on the page with the RUU choice one OTA and flash it try with this one in attachment
Thant said:
fastboot oem lock - relock the bootloader
fastboot oem rebootRUU
fastboot flash zip firmware.zip
fastboot flash zip firmware.zip (AGAIN)
fastboot reboot-bootloader
fastboot flash unlocktoken Unlock_code.bin
then like normal flash recovery and then rom
You can find firmware.zip from OTA on the page with the RUU choice one OTA and flash it try with this one in attachment
Click to expand...
Click to collapse
Hi Thant,
Before trying what you suggested (for manual update) I tried the ICS RUU once again. It went through fine this time not sure why, then I did an OTA upgrade and now I'm on Android 4.0.4 hboot 1.12 (same as before but on 2.17.720.2). There are no more OTA updates available, though HTC india website says there is one available for 3.14.720.24 which is JB version and should automatically update my hboot which I can then hopefully use to update to 4.4 ROM. Do you think what I think is going to work ?
But I can't find the OTA firmware for 3.14.720.24. There was one available here but no more.
There's one here but not sure about the authenticity of this.
I have downloaded the firmware zip you shared but it seems the file is corrupt.
Thanks,
Kunal

My phone boots only into bootloader

Hi guys, I'm having a really big problem because I need to use my phone today but i messed up something.
First i have s-on, installed twrp 2.8, and flashed arhd 34.0 everything worked fine but i had problems with my wifi because of the 4.4.4 firmware on my phone. So i wanted to flash the new firmware but because i was s-on i couldnt do it, so i locked my bootloader and tried again. Now my phone boots only in bootloader and i don't know what to do. Someone please help! :crying:
Before you do anything else, post the result of fastboot getvar all (delete serial no and IMEI no.)
ckpv5 said:
Before you do anything else, post the result of fastboot getvar all (delete serial no and IMEI no.)
Click to expand...
Click to collapse
Here it is, would be great just to get back to any rom that is possible, i've got a nandroid backup of stock rom and arhd 34.0
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 1.22.21331147A1.29G
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.28.401.9
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: m8_ul
(bootloader) platform: hTCBmsm8974
(bootloader) modelid: 0P6B10000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: df77f8b7
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.011s
Click to expand...
Click to collapse
Your first problem here is relocked bootloader. Do you still have custom recovery installed ? Have you try to restore your stock ROM ?
When you mentioned you tried to flash firmware, which firmware version no. ? You fastboot getvar all show you have firmware 3.28.401.9 installed.
ckpv5 said:
Your first problem here is relocked bootloader. Do you still have custom recovery installed ? Have you try to restore your stock ROM ?
When you mentioned you tried to flash firmware, which firmware version no. ? You fastboot getvar all show you have firmware 3.28.401.9 installed.
Click to expand...
Click to collapse
I think i have custom recovery still, but i cant get into it, my phone just restarts again into bootloader
And i tried to install the .401 firmware
Here is another problem ... .401 firmware is not good enough. Need the full version no.
Try to unlock your bootloader with your previous unlock_code.bin
Someone here more or less same problem like yours manage to unlock the bootloader :http://forum.xda-developers.com/htc-one-m8/help/update-bootloader-page-t3015542
The try to flash again TWRP and do restore
ckpv5 said:
Here is another problem ... .401 firmware is not good enough. Need the full version no.
Try to unlock your bootloader with your previous unlock_code.bin
Someone here more or less same problem like yours manage to unlock the bootloader :http://forum.xda-developers.com/htc-one-m8/help/update-bootloader-page-t3015542
The try to flash again TWRP and do restore
Click to expand...
Click to collapse
There is a problem. I don't have the previous bin file because I bought it second hand. I tried although to unlock it in the htcdev site but it fails.
When on bootloader then press power once to hboot then select recovery, it goes back to bootloader ?
I don't have further idea as the bootloader is locked, except if you don't mind losing everything on your internal storage as this will make your device like a new device out from the box is to use the RUU zip. You need an external sdcard.
Download the RUU zip from here : http://forum.xda-developers.com/htc-one-m8/general/htc-one-m8-european-signed-ruu-0p6bimg-t2911563
Or the lollipop one : http://forum.xda-developers.com/showpost.php?p=58457494&postcount=375
rename the zip to 0P6BIMG.zip and put it on external sdcard
boot to bootloader, press power once to hboot, it will ask you to install or not.
ckpv5 said:
When on bootloader then press power once to hboot then select recovery, it goes back to bootloader ?
I don't have further idea as the bootloader is locked, except if you don't mind losing everything on your internal storage as this will make your device like a new device out from the box is to use the RUU zip. You need an external sdcard.
Download the RUU zip from here : http://forum.xda-developers.com/htc-one-m8/general/htc-one-m8-european-signed-ruu-0p6bimg-t2911563
Or the lollipop one : http://forum.xda-developers.com/showpost.php?p=58457494&postcount=375
rename the zip to 0P6BIMG.zip and put it on external sdcard
boot to bootloader, press power once to hboot, it will ask you to install or not.
Click to expand...
Click to collapse
Yes, i get back to bootloader when i select recovery.
I don't mind to lose my data, just get my phone back working
So I'm gonna try this out. It should by itself popup to ask me to install? By external sd card i guess you mean a microsd which i have. Should that zip file be the only file there or can I put it in with other files?
Yes... it will pop-up when you select hboot then press power up to install.
external_sdcard is the microsd. No problem to put it with other files, correct naming is important and put in root of microsd not in folder
ckpv5 said:
Yes... it will pop-up when you select hboot then press power up to install.
external_sdcard is the microsd. No problem to put it with other files, correct naming is important and put in root of microsd not in folder
Click to expand...
Click to collapse
Many thanks bro, I'll post here later if I got everything working.
ckpv5 said:
When on bootloader then press power once to hboot then select recovery, it goes back to bootloader ?
I don't have further idea as the bootloader is locked, except if you don't mind losing everything on your internal storage as this will make your device like a new device out from the box is to use the RUU zip. You need an external sdcard.
Download the RUU zip from here : http://forum.xda-developers.com/htc-one-m8/general/htc-one-m8-european-signed-ruu-0p6bimg-t2911563
Or the lollipop one : http://forum.xda-developers.com/showpost.php?p=58457494&postcount=375
rename the zip to 0P6BIMG.zip and put it on external sdcard
boot to bootloader, press power once to hboot, it will ask you to install or not.
Click to expand...
Click to collapse
I flashed the lollipop ruu and everything went like it should. My phone is running better then ever. Thanks man
Sent from my HTC One_M8

Need HTC One m8 eye(MELS_TUHL) Stock firmware or (Custom recovery with Custom rom)

Hi to everyone
i have htc one m8 eye(MELS_TUHL)
i need a stock firmware or (recovery custom with Custom firmware) to find a way to bootup the phone (now phone on the htc logo and did not wipe with original recovery...)
please give me a link to download the firmware that similar os version as below
C:\adb-fastboot>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 3.19.0.0000
INFOversion-baseband: 1.29.213311711.15G
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main: 4.35.401.3
INFOversion-misc: PVT SHIP S-ON
INFOserialno: FA54PY900289
INFOimei: 358703060038798
INFOimei2: Not Support
INFOmeid: 00000000000000
INFOproduct: mels_tuhl
INFOplatform: hTCBmsm8974
INFOmodelid: 0P6B81000
INFOcidnum: HTC__J15
INFObattery-status: good
INFObattery-voltage: 0mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 719237f7
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Thank You in Advance
is there anyone to help me?
Sent from my iPhone using Tapatalk
Not many people have your device version on XDA.
Is the bootloader unlocked ? If yes, I can suggest something
Need HTC One m8 eye(MELS_TUHL) Stock firmware or (Custom recovery with Custom...
yes
bootloader is unlocked
Sent from my iPhone using Tapatalk
I assume you still have TWRP recovery that meant for your device version.
What you can do is restore an older version then do OTA to the latest
Install TWRP
Restore 1.82.401.7 backup
Install 1.82.401.7 stock recovery
Reboot then do OTA up to 4.35.401.3
You can get 1.82.401.7 backup & recovery in my thread : http://forum.xda-developers.com/htc-one-m8/help/tutorial-how-to-stock-stock-twrp-t3086860
tanx bro
Sent from my iPhone using Tapatalk
Need HTC One m8 eye(MELS_TUHL) Stock firmware or (Custom recovery with Custom...
tanx for your help
but i have a problem with entering to the twrp
after flashing twrp with any version when i want to enter the recovery mode it takes me to the fastboot mode and doesn't go the recovery mode
thay may not belong to this htc one m8 eye
please kindly give me the right link for this model
thank you in advance
Sent from my iPhone using Tapatalk
Try this : http://forum.xda-developers.com/showpost.php?p=62973038&postcount=211
In his link there is TWRP recovery named as recovery m8eye.img
You need to rename that to only twrp.img or recovery.img
download twrp from https://drive.google.com/file/d/0B3w...ew?usp=sharing
install it via fastboot [fastboot flash recovery twrp-m8eye-2.8.0.3 (1).img] use the command inside the bracket, download this backup from http://1drv.ms/1WkbudN now for the back to work well i suggest that you create a backup of your cache on your sd card so that you can have the correct directories to copy the backup to, usually its TWRP/BACKUPS/YOUR SERIAL NUMBER/BACKUP FILES, if you wish to root flash supersu zip from chainfire,
MuminMohamed said:
download twrp from https://drive.google.com/file/d/0B3w...ew?usp=sharing
install it via fastboot [fastboot flash recovery twrp-m8eye-2.8.0.3 (1).img] use the command inside the bracket, download this backup from http://1drv.ms/1WkbudN now for the back to work well i suggest that you create a backup of your cache on your sd card so that you can have the correct directories to copy the backup to, usually its TWRP/BACKUPS/YOUR SERIAL NUMBER/BACKUP FILES, if you wish to root flash supersu zip from chainfire,
Click to expand...
Click to collapse
That backup that you linked is for India version - 1.80.720.1 I guess.
This won't work for him
ckpv5 said:
That backup that you linked is for India version - 1.80.720.1 I guess.
This won't work for him
Click to expand...
Click to collapse
but he can change his mid and cid
MuminMohamed said:
but he can change his mid and cid
Click to expand...
Click to collapse
How to do that on S-On device ?
Are you going to give him USD25 to s-off the device ?
Why do you want to spend USD25 when you can fix it for free with the correct files ?
Stock ROM for M8 Eye
https://drive{dot}google.com/file/d/0B-JhHhqeg46jZm9DYU5rMGVnRTg/view?usp=sharing
CrazyRyanCooper said:
https://drive{dot}google.com/file/d/0B-JhHhqeg46jZm9DYU5rMGVnRTg/view?usp=sharing
Click to expand...
Click to collapse
can u tell us which version is this
and always write full info
A_1st said:
can u tell us which version is this
and always write full info
Click to expand...
Click to collapse
Its' Lollypop...
internal storage problem
ckpv5 said:
How to do that on S-On device ?
Are you going to give him USD25 to s-off the device ?
Why do you want to spend USD25 when you can fix it for free with the correct files ?
Click to expand...
Click to collapse
hello, help plzz
After restoring from marshmallow backup , my internal storage is not showing files & folders, I can`t copy files in my internal storage just can install app , how to fix it ??????
mrd44 said:
hello, help plzz
After restoring from marshmallow backup , my internal storage is not showing files & folders, I can`t copy files in my internal storage just can install app , how to fix it ??????
Click to expand...
Click to collapse
I am also facing same problem in my htc one m8 eye, can any one help us on this ? : (
Saved my Life!!
Thanks a lot
CrazyRyanCooper said:
https://drive{dot}google.com/file/d/0B-JhHhqeg46jZm9DYU5rMGVnRTg/view?usp=sharing
Click to expand...
Click to collapse
Hi there,
How can i get htc m8 eye marshmallow stock rom or lineage OS 14 for htc m8 eye. I have tried to install htc m8 lineage rom via TWRP but its not working in m8 eye as both are different phone.
Plzz assist.
Htc One M8 Eye firmware
Htc One M8 Eye firmware
Model : MELS_TUHL
IMEI : 355991060321032
Build : 5.07.720.1
CID : HTC__038
HBoot : 3.19.0.0000
MID : 0P6B90000
Security : ON
Region : ASIA_INDIA
Plxxxx Provide me This flash File

help me !! ruu for cid :htc_k18

I collapsed on set. I cant reinstall
how do I do it ?
I tried to install variants
Details :
(Bootloader) version: 0.5
(Bootloader) version-bootloader: 3.19.0.0000
(Bootloader) version-baseband: 1.29.214500021.
(Bootloader) version-cpld: None
(Bootloader) version-microp: None
(Bootloader) version-main:
(Bootloader) version-misc: PVT SHIP S-ON
(Bootloader) imei2: Not Support
(Bootloader) meid: 00000000000000
(Bootloader) product: m8_ul
(Bootloader) platform: hTCBmsm8974
(Bootloader) modelid: 0P6B10000
(Bootloader) cidnum: HTC__K18
(Bootloader) battery-status: good
(Bootloader) battery-voltage: 0mV
(Bootloader) partition-layout: Generic
(Bootloader) security: on
(Bootloader) Build mode: SHIP
(Bootloader) boot-mode: FASTBOOT
(Bootloader) commitno-bootloader: 76df2b54
(Bootloader) hbootpreupdate: 11
(Bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.039s
I got an error message "ERROR 159 IMG ERORR".
Someone please help me!!!!!!:crying::crying:
ybprod said:
I collapsed on set. I cant reinstall
how do I do it ?
I tried to install variants
Click to expand...
Click to collapse
what is the rom version that you tried to install?
umesh.lk said:
what is the rom version that you tried to install?
Click to expand...
Click to collapse
i try :
OTA_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_R-4.16.401.13_release_464427hcbkgvubiqkgdofi
RUU_M8_UL_L50_SENSE60_MR_HTC_Europe_4.16.401.10_Radio_1.25.214500021.06G_20.68.4196t.01_F_release_417003_signed
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3
and still the same message:
"error: 159 error img"
ybprod said:
i try :
OTA_M8_UL_M60_SENSE70_MR_HTC_Europe_6.12.401.4_R-4.16.401.13_release_464427hcbkgvubiqkgdofi
RUU_M8_UL_L50_SENSE60_MR_HTC_Europe_4.16.401.10_Radio_1.25.214500021.06G_20.68.4196t.01_F_release_417003_signed
RUU_M8_WHL_M60_SENSE70_SPCS_MR_Sprint_WWE_6.20.651.3
and still the same message:
"error: 159 error img"
Click to expand...
Click to collapse
what is the current status of device.
umesh.lk said:
what is the current status of device.
Click to expand...
Click to collapse
***software status: modified ***
M8_UL PVT SHIP S_ON
HBOOT- 3.19.0.0000
RADIO-1.29.21450021.12G
ybprod said:
***software status: modified ***
M8_UL PVT SHIP S_ON
HBOOT- 3.19.0.0000
RADIO-1.29.21450021.12G
Click to expand...
Click to collapse
no no I meant whether it is bricked or normally work. is your bootloader locked or unlocked?
umesh.lk said:
no no I meant wheather it is bricked or normally work.
Click to expand...
Click to collapse
not work. A white logo for HTC
ybprod said:
not work. A white logo for HTC
Click to expand...
Click to collapse
this is your firmware. try to flash it.
1) rename the downloaded file to 0P6BIMG
2) copy the downloaded file to SD card.
3) insert the SD card into phone.
4) go to bootloader & flash.
ybprod said:
not work. A white logo for HTC
Click to expand...
Click to collapse
I tried to install both situations
But now is relocked
umesh.lk said:
this is your firmware. try to flash it.
1) rename the downloaded file to 0P6BIMG
2) copy the downloaded file to SD card.
3) insert the SD card into phone.
4) go to bootloader & flash.
Click to expand...
Click to collapse
There is a detailed guide it ?
ybprod said:
There is a detailed guide it ?
Click to expand...
Click to collapse
there is no guide. I told you the simple way which can use to flash. as your device is s-on, you can only install officially your current version. this is a RUU zip which matches you. (How to flash? rename to 0P6BIMG and flash with hboot; copy the renamed file to a SD card & (phone must be switched off) insert it to phone & after go to bootloader by pressing volume down + power button. device will automatically read SD card. when zip file is verified, it will ask to flash. by pressing volume up make it yes.) (you will lose your all data. I can't be responsible for that. and you don't have any method to recovery backup; if you are relocked.)
umesh.lk said:
there is no guide. I told you the simple way which can use to flash. as your device is s-on, you can only install officially your current version. this is a RUU zip which matches you. (How to flash? rename to 0P6BIMG and flash with hboot; copy the renamed file to a SD card & (phone must be switched off) insert it to phone & after go to bootloader by pressing volume down + power button. device will automatically read SD card. when zip file is verified, it will ask to flash. by pressing volume up make it yes.) (you will lose your all data. I can't be responsible for that. and you don't have any method to recovery backup; if you are relocked.)
Click to expand...
Click to collapse
After it runs the image gives only an option of turning off .and it returns to the same state white screen of HTC Logo
someone....
ybprod said:
After it runs the image gives only an option of turning off .and it returns to the same state white screen of HTC Logo
Click to expand...
Click to collapse
did your device run LP or MM before bricked? post an image of bootloader info(or type info in bootloader of first 10 rows)
i think my devices was LP
***software status: modified ***
***RELOCKED**
M8_UL PVT SHIP S_ON
HBOOT- 3.19.0.0000
RADIO-1.29.21450021.12G
OpenDSP-V51.2.2-00593-m8974_f0.1015
OS-6.12.401.4
eMMC-boot 2048MB
Dec 17 2015'14:15:48.0
ybprod said:
i think my devices was LP
***software status: modified ***
***RELOCKED**
M8_UL PVT SHIP S_ON
HBOOT- 3.19.0.0000
RADIO-1.29.21450021.12G
OpenDSP-V51.2.2-00593-m8974_f0.1015
OS-6.12.401.4
eMMC-boot 2048MB
Dec 17 2015'14:15:48.0
Click to expand...
Click to collapse
do u have the downloaded ruu zip which was in post #11
did you flash firmware without error? didn't u try to flash firmware as u flashed ruu zip?
umesh.lk said:
do u have the downloaded ruu zip which was in post #11
did you flash firmware without error? didn't u try to flash firmware as u flashed ruu zip?
Click to expand...
Click to collapse
I installed the fw 6.12.401.4
Successfully.
I tried to flash what brought me.
I tried to flash with "relocked" and "unlocked".
and nothing..
ybprod said:
I installed the fw 6.12.401.4
Successfully.
I tried to flash what brought me.
I tried to flash with "relocked" and "unlocked".
and nothing..
Click to expand...
Click to collapse
did u download this file? https://www.androidfilehost.com/?fid=24369303960687057
if it didn't work on sd method, try this method.
http://forum.xda-developers.com/showpost.php?p=67314040&postcount=1749
how did ur device get bricked? (after what kind of change done)
I have to sign out now. It's time to sleep. I think u can fix this.
(examine the reason for any problem generate, you can find a solution from that. It's a secret of life.)
umesh.lk said:
did u download this file? https://www.androidfilehost.com/?fid=24369303960687057
if it didn't work on sd method, try this method.
http://forum.xda-developers.com/showpost.php?p=67314040&postcount=1749
how did ur device get bricked? (after what kind of change done)
I have to sign out now. It's time to sleep. I think u can fix this.
(examine the reason for any problem generate, you can find a solution from that. It's a secret of life.)
Click to expand...
Click to collapse
Dude . I want to thank you but I
d'not know how .
Now my device works .:good::good::good: hallelujah
Thank you Thank you Thank you Thank you Thank you Thank you
Thank you for your time and patience
P.S
I managed a second guide ARUWizard.exe
ybprod said:
Dude . I want to thank you but I
d'not know how .
Click to expand...
Click to collapse
Click that "thanks" button under his posts.

Need help to return to stock rom

Hello,
I bought a M8s (m8ql_ul), but I found it rooted.
How can I return to stock rom ?
The OS version is unknown : the version-main is empty (listed by : fastboot getvar all)
My M8s is :
- Unlocked
- Rooted
- S-ON
------------------------------
version-bootloader: 3.19.0.0000
version-baseband: [email protected]
version-main:
version-misc: PVT SHIP S-ON
serialno: ---------
imei: -------------------------
product: m8ql_ul
platform: hTCBmsm8939
modelid: 0PKV10000
cidnum: HTC__102
security: on
--------------------------------
Can I use an international stock rom x.x.401.x ?
Do you have a link to it ?
Thank you.
TF85 said:
Hello,
I bought a M8s (m8ql_ul), but I found it rooted.
How can I return to stock rom ?
The OS version is unknown : the version-main is empty (listed by : fastboot getvar all)
My M8s is :
- Unlocked
- Rooted
- S-ON
------------------------------
version-bootloader: 3.19.0.0000
version-baseband: [email protected]
version-main:
version-misc: PVT SHIP S-ON
serialno: ---------
imei: -------------------------
product: m8ql_ul
platform: hTCBmsm8939
modelid: 0PKV10000
cidnum: HTC__102
security: on
--------------------------------
Can I use an international stock rom x.x.401.x ?
Do you have a link to it ?
Thank you.
Click to expand...
Click to collapse
Its out there. I put it on the sd external card. I rename it 0PKVIMG.zip and start into bootloader where it gets read instantaneously and begins to install the sense 7.0 Android 6.0. IF you have first relocked your bootloader at htcdev .
It is explained by htcdev
You can do it too as I did.
Hello,
Then I can try with any stock rom having the Sense 7 and Android 6 ?
Like : 2.10.401.1
Thank you
TF85 said:
Hello,
Then I can try with any stock rom having the Sense 7 and Android 6 ?
Like : 2.10.401.1
Thank you
Click to expand...
Click to collapse
There is only one I have seen that is out there to download. It worked and my phone can be completely restored to the basic MM. It then immediately prompts to update as it is the initial MM 6.0 to start. Then it may update a 2nd time. It is sense 7 and android 6 Marshmallow. It is EU vsn. Don't know about other continents and carrier versions.
Hello,
I downloaded this one :
0PKVIM[email protected]60201_20.05_018_F_release_479349_combined_signed.MD5.zip
I'll try do flash it.
thank you
TF85 said:
Hello,
I downloaded this one :
0PKVIM[email protected]60201_20.05_018_F_release_479349_combined_signed.MD5.zip
I'll try do flash it.
thank you
Click to expand...
Click to collapse
How did it go? Did it went?
Hello,
I downloaded it at this link :
https://www.androidfilehost.com/?fid=24591023225176246
Good luck
Did it work for you ? I'm also trying to go back to stock on my m8s. Tell me how did you do it if it worked.
Hello,
I could not flash it, TWRP print several errors.
I tried the TWRP-4.16.401.13.zip, TWRP sent me errors like : <Could not find "META-INF/com/google/android/update-binary" in the zip file>
No idea.
Hello,
I had to lock the bootloader, before flashing the zip file.
This flash is now installed (0PKVIM[email protected]60201_20.05_018_F_release_479349_combined_signed.zip), and it works.
This version is compatible with these CID :
HTC__001,
HTC__102,
HTC__032,
HTC__Y13,
HTC__031,
HTC__M27,
HTC__002,
HTC__A07.
and for the modelid : 0PKV10000
The OTA will work.
How to do :
This flash is for
Firstly, charge the M8s to 100%.
1- Lock the bootloader, it became "RELOCKED".
2- With your PC, copy this zip file into an SD card, remane it : 0PKVIMG.zip (it starts with zero)
3- Insert the sd card into M8s and boot into bootloader,
4- It takes at least 10 minutes to finish the new flash.
Good luck.
I want to flash the same version too but when I relock the bootloader there is some bugs that make that the flash doesn't work. Please help.

Categories

Resources