Ok, direct to the point again,
My Zenfone 2 is havings issues, what i observed will be listed below
when screen is off/standby the phone suddenly vibrates, as i very long until i force shut off, then it reboots again, this just started 2 days ago, i'm not sure what started it though...
Sometimes it just shuts off by itself.. also, some other time, the home and menu soft button don't work..
please help??
specs from cpu-z
Intel(R) Atom(TM) CPU Z3580 2.33GHz
Cores 4
Architecture x86
CPUID 6.5a.0
Codename Moorefield
Process 22nm
L1 D-Cache 4x24 KB
L1 I-Cache 4x32 KB
L2 Cache 2x1024 KB
Clock Speed 500 MHz - 2.33 Ghz
Rooted - NO
Related
Just checked, there is only activity on 3 cores. Core 0 1 and 3. Core 3 is not activating at all and there is no graph at all for Core 2. Is that normal?
Shadowjump said:
Just checked, there is only activity on 3 cores. Core 0 1 and 3. Core 3 is not activating at all and there is no graph at all for Core 2. Is that normal?
Click to expand...
Click to collapse
Maybe system monitor has some bugs?
Maybe u turned power saving mode on?
Sent from my GT-N7100 using xda app-developers app
Did you restart your phone at least 3 times?
swyped all these spelling errors from my galaxy note 2
What? Restart the phone 3 times? Why do that? And no, no power saving on!
I notice that sometimes, one or more CPU goes "offline", i guess it's a power super saving feature of the phone and not a bug. I check with system tuner, cpu 1 and 2 are "offline", i start a game, check again, and all cpu are online.
My CPU Speed automatically goes down to 810Mhz on all overclocked kernels.
Even in CM10 kernels,
It happens in between while I play a game or so.
Even if I install Kernel with only GPU overclock, it still happens.
But never happens on stock kernels. I have to manually increase the CPU speed by setCPU.
Any Solutions for it Guys?
Moved to Q&A
Try to use Kernel tuner, and normally the device uses 810 mhz too cool down...
patato800 said:
Try to use Kernel tuner, and normally the device uses 810 mhz too cool down...
Click to expand...
Click to collapse
Used kernel tuner but still the same result, it goes to 810mhz even if the phone is not hot (just homescreen) and when i increase it, it remains at max even if i play games and make it hot. but after some time (say 15 or 20 minutes) even if I am in standby mode the cpu goes down to 810Mhz. previously at some point it was 1134Mhz.
Guys, anyone with some help. It has even started to occur in Complete stock ROM. (flashed the ftf on locked bootloader, still the max cpu spped drops from 1.5 Ghz to 810 Mhz, some times both cores)
halleyrokz said:
Guys, anyone with some help. It has even started to occur in Complete stock ROM. (flashed the ftf on locked bootloader, still the max cpu spped drops from 1.5 Ghz to 810 Mhz, some times both cores)
Click to expand...
Click to collapse
I had the same problem but i discoverd that the Battery saver pro causes that problem for me. If you use the seme app untick control CPU frequency.
It is actually a built in security feature of our phones which gets activated when temperature of phone goes high . At least that's what I know .
Sent from my Xperia S using xda premium
Here's solution!!!
http://forum.xda-developers.com/showthread.php?p=32245228
Send from my stupid lt26i
hi my lg g4 815 running 81510p was showing 4 cores in antutu and was working fine but now its lagging severely and cpu z shows 1 core is active other 5 are stopped ?
what could be the cause? how to restore its 4 core functionality ???
you havent flashed "bootloop fix".tot file have you?
Is it a known issue that HTC One m9 phones are underclocked to prevent thermal problems? Because when I open up cpuz to see what frequency the cores are running at, the highest core 0-3 go to is 1.5 gigahertz. Core 4-7 never go higher than 700ish megahertz and only 2 of them are ever running at the same time. I have a custom rom installed that enables Vulcan support, but even before flashing the rom, cpuz was showing the same results mentioned above. Power saver is turned off, there are no programs that are changing the core frequency in any way, and high performance mode is turned on in developer options in settings.
Any suggestions on how to possibly unlock core 4-7 frequencies to go all the way to the advertised 2 gigahertz? Or did I just turn on a setting that somehow affects possessor max speed?
Yo boy i have a answear for you in kernel auditor go to cores and make sure you disable core 8, core 6 and core 3 and maybe set the governor to deadline and irq blance to 0
NOW you have to go to vendor folder in system or root folder / . and delete thermal.conf or so at 10 you need to go system root /vendor and delte the file reboot and now you have unlocked full performance
It's been a while since I've rooted or done anything with this phone hoping somebody could help me along.
I installed lineage 11 and phone seems laggy and slow.
So I installed cpu-z and it shows course 3 and 4 are stopped. Even when I run the browser and play some video it shows the cores are stopped.
Plus the two coins that are working seem to only go up to 1190 MHz nothing higher. Attaching screenshots of my CPU z screenshot and my about phone screenshot thank you.