Develop Bugs

[MOD] Volume Boost for Headphones, Earpiece, Bluetooth, and Speaker. JB/KK/G3 Roms

AS OF NOW, THIS IS UNSUPPORTED, IF SOMEONE WOULD LIKE TO TAKE OVER DEVELOPMENT FEEL FREE TO, MAKE SURE CREDIT IS GIVEN TO ME AND IXNYNE. EDITING THE FILES WITH A TEXT EDITOR WORKS BEST. HAVE FUN!!! EMAIL ME @ [email protected]
Hey everybody, I just made some Headphone volume boost scripts, all are tested and work, though some may damage your hardware.(Continue reading)
These are flashable zip files that will work on any recovery.
They range in digital volume from 62-68 for now. And range from 19-20 in digital volume. (63/19 only)
They are safe to flash for the most part, but values above 65 for digital volume MAY damage hardware.
How to install:
Download and flash in CWM, TWRP, or Philz
Downloads: Below
-Slight boost, choose 62/20, 63/19, 63/20, or 64/20
-Medium boost, choose 65/20- Some devices may clip at high volume.
-High boost, choose 66/20- Some devices may clip at high volume.
-Experimental Extreme boost, choose 67/20 or 68/20- use with caution! May damage hardware.
I would recommend 63/19 for iPhone like sound. Or 64/20 for loud sound, without distortion.
Aosp earpiece boost and stock earpiece was removed, they didn't work correctly, use new earpiece and Bluetooth boost!
Remember:
I am not responsible if your phone explodes, creates a nuclear weapon, makes your ears bleed, or if it stops working.
If you say I broke your phone, I will laugh at you. Please advise!
Bugs: None reported... Yet.
Please tell me if anything is wrong!
Thanks,
willi_3609
P.S. this is working best on KK Roms. And new Earpiece and Bluetooth boost are out!!!
Thanks to iXNyNe for the base files!

Thank you for making this. I found it to be very helpful.
Sent from my LG-D800 using XDA Premium 4 mobile app

I added a link to your thread in my op
Sent from my XT1060 using Tapatalk

Empty, space save.
I'll post small fixes here!
1. If you have a problem, tell me what model and ROM you are running. Plus the mod you flashed.
2. Please be polite!

Can you do the same for handset speaker? Thanks

Yes. soon
tholmes8291 said:
Can you do the same for handset speaker? Thanks
Click to expand...
Click to collapse
I will add them soon, I am testing different values.

willi_3609 said:
I will add them soon, I am testing different values.
Click to expand...
Click to collapse
I believe the handset speaker uses rx1 so using the headphone zip should also set the handset volume.
Sent from my XT1060 using Tapatalk

It uses rx7
iXNyNe said:
I believe the handset speaker uses rx1 so using the headphone zip should also set the handset volume.
Sent from my XT1060 using Tapatalk
Click to expand...
Click to collapse
Just put them up, they use rx7 not rx1, I wish it were that easy, I've been trying to find a way to boost the earpiece volume, for making calls. Its hard.

your the best dude..

Thanks, don't forget to hit the thanks button.
reyscott1968 said:
your the best dude..
Click to expand...
Click to collapse
Good to know people like the vol boost!

willi_3609 said:
Good to know people like the vol boost!
Click to expand...
Click to collapse
was looking for this a long time ago.. i flashed 2 files yesterday from some1 who posted other volume boosts as well but having a more wide option available is amazing....

If i an not mistaken , we can flash multiple files one after the other, correct ?
example.. i want to boost Head phone and speaker .. so flash Headphone6520.zip followed by Speaker66.zip ? or would Speaker66.zip overwrite Headphone.zip changes ?
As i understand it both files just modify Mixer_paths.Xml, so multiple flashes would just be overwriting the same file?
Thanks for the mod !

You can use both.
nayak.aj said:
If i an not mistaken , we can flash multiple files one after the other, correct ?
example.. i want to boost Head phone and speaker .. so flash Headphone6520.zip followed by Speaker66.zip ? or would Speaker66.zip overwrite Headphone.zip changes ?
As i understand it both files just modify Mixer_paths.Xml, so multiple flashes would just be overwriting the same file?
Thanks for the mod !
Click to expand...
Click to collapse
It just modifies them, you can flash both speaker and headphone, no need to wipe anything either!

Can anybody test somethibg out for me.
I need somebody with an AOSP based ROM to test my Earpiece zip. That would be great, ui need to know if it works on the D80x models
It should boost earpiece volume as that is the only lower value, but I would be thankful to have someone test it and report back to me. Thanks.

@willi_3609 Thanks for this..
i ve flashed some of them.. it works fine with cable headphone but bluetooth headphone is not as loud as cable headphones..
Would be much better if bluetooth headphones could sound like same as cable headphones

Thanks!

hallowman said:
@willi_3609 Thanks for this..
i ve flashed some of them.. it works fine with cable headphone but bluetooth headphone is not as loud as cable headphones..
Would be much better if bluetooth headphones could sound like same as cable headphones
Click to expand...
Click to collapse
its been posted a lot of time, bluetooth headphone volume is digital. cant be changed
question: when i already have a volume mod flashed then i flash another kernel, the volume mod flashed will dissappear right? so need to flash the boost again..? ?

reyscott1968 said:
its been posted a lot of time, bluetooth headphone volume is digital. cant be changed
question: when i already have a volume mod flashed then i flash another kernel, the volume mod flashed will dissappear right? so need to flash the boost again..? ?
Click to expand...
Click to collapse
Answer: Its actually not about kernel.. But yes. It can help..
I ve tried many rome and mods .. Its definitely changeable.. Last time i ve tried sony walkman on my g2 (cloudy g3 rom) was the best sound with bluetooth.. It was as loud as cable..
but cloudy's rom wasn't good enough.. (heating) therefor i had to change it..
So one thing i m sure is bluetooth sounds can be changed..

Cm integration
Hey OP can you look at possibly getting this working with cm11. I know there are other mods that say they help with those volume issues but I've yet to find one that gives stock like or close to stock results. Thanks!

it already works.
frontlyna said:
Hey OP can you look at possibly getting this working with cm11. I know there are other mods that say they help with those volume issues but I've yet to find one that gives stock like or close to stock results. Thanks!
Click to expand...
Click to collapse
This works with all Roms, cm, aosp, stock, everything.
It just edits a file already present in the Roms.

[MOD] All Volumes Booster different versions works with lollipop

Here's a mod I made up that boosts all the volumes from stock 84 to 90 ,95 and 98
Download All volumes to 90 here - https://mega.co.nz/#!71wnnKYa!RQZ8OtEuUe4ZOppKxXi94FQfj38jiNT0cBeUiNu4e5Q
Download All volumes to 95 here - https://mega.co.nz/#!P9RX0I4D!khQXXQhZXSOyD8V9MZH6PU-8NrleS7K8APYJ6IRmkvM
Download All volumes to 98 here - https://mega.co.nz/#!6ogSyIbJ!hoRhR0itt3srG9WVbGgx3Mbt5zTWZjbj0kqur5bT1wA
98 is the max some distortion on tablet speaker at max volume but most headphones and Bluetooth speakers can handle it
Download
Reboot into recovery and flash
Enjoy
Also here's a revert back to stock if you ever want to
Download here - https://mega.co.nz/#!v1hCjRQQ!dm8YNfMgpgTaKqmDA73VzHRl1sFr3jININnmHsWXOH8
Reboot into recovery and flash
And you're back to stock
Also I recommend installing viper4android apk along with this mod to enhance the sound quality here's a link to his apk - http://forum.xda-developers.com/showthread.php?t=2191223
You should install his apk as a system app
Enjoy and hit thanks if you like this mod

Might check this out soon, but just a quick question since this is basically max volume - have you noticed any distortion or excess clipping on any particular media yet? Appreciate it.

bentleyboy said:
Might check this out soon, but just a quick question since this is basically max volume - have you noticed any distortion or excess clipping on any particular media yet? Appreciate it.
Click to expand...
Click to collapse
With the second mod the one that boosts the volumes to 98 there is some distortion with the volume at max but the first not so much very little at max so I would recommend the one that boosts to 95 I only made the other one mainly for Bluetooth and headphones as they can handle the extra boost I also recommend installing vipers apk along with my mod for better sound quality I included a direct download link to the apk you should install it as a system app.
Also here's a lnk to his thread - http://forum.xda-developers.com/showthread.php?t=2191223

Link for Volume 95 isn't working

LittleConfucy said:
Link for Volume 95 isn't working
Click to expand...
Click to collapse
Sorry it's up now thanks for pointing that out

You're welcome! :good:

Robshr said:
With the second mod the one that boosts the volumes to 98 there is some distortion with the volume at max but the first not so much very little at max so I would recommend the one that boosts to 95 I only made the other one mainly for Bluetooth and headphones as they can handle the extra boost I also recommend installing vipers apk along with my mod for better sound quality I included a direct download link to the apk you should install it as a system app.
Also here's a lnk to his thread - http://forum.xda-developers.com/showthread.php?t=2191223
Click to expand...
Click to collapse
Excellent. Thanks for the heads up on going for the 95 (and including the link.)

Volume 90 Mod doesn't work
The volume mod 90 doesn't work, after flashing there is no sound, then either have to restore stock or 95. Please fix when you can, thanks!

GalaxyNote2Mod said:
The volume mod 90 doesn't work, after flashing there is no sound, then either have to restore stock or 95. Please fix when you can, thanks!
Click to expand...
Click to collapse
Sorry about that I don't know what happened but it's up and works now
Thanks for the heads up

Holy s*** 95 gives a very nice improvement in sound
Thanks bro....
Sent from the "DOG" pound

Dude this is so amazing. I've tried 90 and 95 and there is so much improvement in sound volume. Thank you so much! I can finally enjoy the sound of my Flo.

Just glad to make some people happy and to help out cheers and I'm glad you all are enjoying the mod

95, at least for me, it really disorts the sound at high volumes (At least in YouTube)

LittleConfucy said:
95, at least for me, it really disorts the sound at high volumes (At least in YouTube)
Click to expand...
Click to collapse
Anything over 90 will distort at high volume with the devices speakers as they are just not made to handle it I just turn the volume down the main reason I made the higher volume is for using headphones or Bluetooth speakers as they're able to handle the higher volumes without distortion

Robshr said:
Anything over 90 will distort at high volume with the devices speakers as they are just not made to handle it I just turn the volume down the main reason I made the higher volume is for using headphones or Bluetooth speakers as they're able to handle the higher volumes without distortion
Click to expand...
Click to collapse
Thanks!:good: 90 works great, very little distortion, if any at all

Thanks for this! now if I could get my auto screen rotation fixed I'll be golden.
Sent from my Nexus 7 using xda premium

Probably a stupid question, would this work on other phones/tablets?
Or is this just for nexus 7

aSuperSaiyanG0D said:
Probably a stupid question, would this work on other phones/tablets?
Or is this just for nexus 7
Click to expand...
Click to collapse
It's made for the nexus 7 but what phone or tablet do you have I might be able to help you out

Robshr said:
It's made for the nexus 7 but what phone or tablet do you have I might be able to help you out
Click to expand...
Click to collapse
It's an T-Mobile LG Optimus L90,
It's no biggie since I'm using v4a at the moment, but I gotta say, this tweak plus v4a on my tablet is just wow man, excellent job??

aSuperSaiyanG0D said:
It's an T-Mobile LG Optimus L90,
It's no biggie since I'm using v4a at the moment, but I gotta say, this tweak plus v4a is just wow man, excellent job??
Click to expand...
Click to collapse
So you tried it and it worked for you cause if not I was going to say and try my volume booster for the lg g2 it might work on that phone here's the link. http://forum.xda-developers.com/showthread.php?t=2769799

Increase speaker volume

I find the volume rather low, especially compared to my One mini..
Now with the mini having beats, it was just editing playbackbeats_l.eq and playbackbeats.eq to 1.2 setting
Now we have playbackMFG_l.eq, playbackMFG.eq, playbackwoofer.eq, playback.eq and playback_l.eq, tho only playbackMFG_l.eq, playbackMFG.eq, playbackwoofer.eq are showing the same values as the beats ones had before (but on 1 and not 1.2 ofc)..
So which ones of these do i have to change to get the sound boost going?

Seriously? Volume not loud enough still xD
I will come up with something in a few days
The beats method I discovered only works with phones with Beats Audio I still haven't found a proper method for the M8 yet! Hopefully the M9 shouldn't be too hard

Hahah yeah, compared to my Mini that has the 1.2 setting, it's far more quiet, and the Mini was already very quiet at stock... :\
But thanks, hope you can find something :highfive:

sausje85 said:
Hahah yeah, compared to my Mini that has the 1.2 setting, it's far more quiet, and the Mini was already very quiet at stock... :\
But thanks, hope you can find something :highfive:
Click to expand...
Click to collapse
I also hope someone (or HTC) comes with a solution or brings more attention to this. I am coming to my M9 from the M7. The notifications, rings, etc are very soft volume at the highest settings. I have missed many SMS from this and using the same ringtones from my original M7.

Me too. The phone has the most clear sounding speakers but I wish they were louder. Could this be fixed/changed with a software update?

Same issue here. I sent HTC an email but haven't heard anything back yet. The sound quality is good but nowhere near loud enough. Notifications are very quiet even with the volume all the way up.
Sent from my 0PJA2 using XDA Free mobile app

There is a hidden menu or a dial secret code to enter the engineering mode like mtk chipset?
I am also the vibration a little 'soft!
With that menu could fix all these things but I can't find it!
I only found the code to enter the tests menu and even in the developer option from there!

I have to use mine on lower than max settings because it's too loud. Doubt any mods will do anything to the volume as an increase in volume will be traded against a decrease in sound quality as always.

Did anybody find a way to increase the speaker volume?
---------- Post added at 04:49 PM ---------- Previous post was at 04:48 PM ----------
sausje85 said:
I find the volume rather low, especially compared to my One mini..
Now with the mini having beats, it was just editing playbackbeats_l.eq and playbackbeats.eq to 1.2 setting
Now we have playbackMFG_l.eq, playbackMFG.eq, playbackwoofer.eq, playback.eq and playback_l.eq, tho only playbackMFG_l.eq, playbackMFG.eq, playbackwoofer.eq are showing the same values as the beats ones had before (but on 1 and not 1.2 ofc)..
So which ones of these do i have to change to get the sound boost going?
Click to expand...
Click to collapse
Did you ever find the solution?

ZeroInfinity said:
Seriously? Volume not loud enough still xD
I will come up with something in a few days
The beats method I discovered only works with phones with Beats Audio I still haven't found a proper method for the M8 yet! Hopefully the M9 shouldn't be too hard
Click to expand...
Click to collapse
So that means it's impossible to boost the M8's speaker?
Please reply.

edios123 said:
So that means it's impossible to boost the M8's speaker?
Please reply.
Click to expand...
Click to collapse
The notification seems to be loud but when playing videos from Youtube I think the M8 is louder

Seriously guys, nobody found a way to hack thet

Guys, for volume boost on m8 & m9 you must edit playback.eq and playback_l.eq (for right and left speaker respectively), just erase all the digits and make it look like playbackbeats.eq from beats phones (1 1 0 0 0 0; 2 1 0 0 0 0 etc), then just edit values to 1.1 or 1.2, just what are you want. Also if you know how to adjust parametric equalizer, you can edit stock values (for example 0.39374446868896 + 0.1 = 0.49374446868896), then you should edit the first value in each row. Sorry for my bad english.

1 0.393744468688965 -0.78748893737793 0.393744468688965 -1.97774314880371 0.978421211242676
2 0.93584156036377 -1.7886323928833 0.865275382995605 -1.7886323928833 0.801116943359375
3 1.00445079803467 -1.97736358642578 0.973972320556641 -1.97736358642578 0.978422164916992
4 1.01906585693359 -1.40309906005859 0.668427467346191 -1.40309906005859 0.687493324279785
5 0.802538871765137 -0.167890548706055 0.483723640441895 -0.167890548706055 0.286262512207031
6 0.889889717102051 -0.363191604614258 0.513376235961914 -0.363191604614258 0.403265953063965
7 1.02159881591797 -1.71049690246582 0.749238014221191 -1.71049690246582 0.77083683013916
8 1.02964210510254 -1.78723430633545 0.792606353759766 -1.78723430633545 0.822248458862305
9 1.27145004272461 0.535898208618164 -0.199652671813965 0.535898208618164 0.0717964172363281
10 0.970973014831543 -1.70304107666016 0.746763229370117 -1.70304107666016 0.717737197875977
That is my playback.eq file .Which numbers do I change?

SashaSmile said:
Guys, for volume boost on m8 & m9 you must edit playback.eq and playback_l.eq (for right and left speaker respectively), just erase all the digits and make it look like playbackbeats.eq from beats phones (1 1 0 0 0 0; 2 1 0 0 0 0 etc), then just edit values to 1.1 or 1.2, just what are you want. Also if you know how to adjust parametric equalizer, you can edit stock values (for example 0.39374446868896 + 0.1 = 0.49374446868896), then you should edit the first value in each row. Sorry for my bad english.
Click to expand...
Click to collapse
I seriously doubt that works as people already have tried that:
ZeroInfinity said:
The beats method I discovered only works with phones with Beats Audio I still haven't found a proper method for the M8 yet! Hopefully the M9 shouldn't be too hard
Click to expand...
Click to collapse

Switched to AOSP/CM rom and my volume is very loud now. I can actually hear my notifications.

meat-rack said:
1 0.393744468688965 -0.78748893737793 0.393744468688965 -1.97774314880371 0.978421211242676
2 0.93584156036377 -1.7886323928833 0.865275382995605 -1.7886323928833 0.801116943359375
3 1.00445079803467 -1.97736358642578 0.973972320556641 -1.97736358642578 0.978422164916992
4 1.01906585693359 -1.40309906005859 0.668427467346191 -1.40309906005859 0.687493324279785
5 0.802538871765137 -0.167890548706055 0.483723640441895 -0.167890548706055 0.286262512207031
6 0.889889717102051 -0.363191604614258 0.513376235961914 -0.363191604614258 0.403265953063965
7 1.02159881591797 -1.71049690246582 0.749238014221191 -1.71049690246582 0.77083683013916
8 1.02964210510254 -1.78723430633545 0.792606353759766 -1.78723430633545 0.822248458862305
9 1.27145004272461 0.535898208618164 -0.199652671813965 0.535898208618164 0.0717964172363281
10 0.970973014831543 -1.70304107666016 0.746763229370117 -1.70304107666016 0.717737197875977
That is my playback.eq file .Which numbers do I change?
Click to expand...
Click to collapse
First in each row. 0.393744468688965, 0.93584156036377, 1.00445079803467 etc.
---------- Post added at 12:08 PM ---------- Previous post was at 12:04 PM ----------
sausje85 said:
I seriously doubt that works as people already have tried that
Click to expand...
Click to collapse
For beats phones you should edit beats files (playbackbeats), or playback files, for phones w/o beats audio - only playback files. It really works and many people on 4pda forum confirmed it.

switching to AOSP
Can u tell me how to make this change? Do i need an unlocked m9? I am also trying to find someone who can make the LED flash standard RGB as notifications similar to previous and all other phones....Anyone know how to get these basic features to work???
Andrewbud said:
Switched to AOSP/CM rom and my volume is very loud now. I can actually hear my notifications.
Click to expand...
Click to collapse

i found a way to do it without root or custom roms. may not work quite as well but it definitely improved my volume. It seems the extra bass makes the volume really low so i downloaded the equalizer app on the play store and decreased some of the bass and it sounds great now. The eq settings I find to be most effective are as follows. 60Hz all the way up, 230Hz at 0 dB, 910Hz all the way up, 4kHz at 0 dB, and 14kHz all the way up. If you don't wat the eq notification in the status bar just disable all notifications for the eq app. I hope this helps for all who don't want to root or use custom roms.

Metalheadx92 said:
i found a way to do it without root or custom roms. may not work quite as well but it definitely improved my volume. It seems the extra bass makes the volume really low so i downloaded the equalizer app on the play store and decreased some of the bass and it sounds great now. The eq settings I find to be most effective are as follows. 60Hz all the way up, 230Hz at 0 dB, 910Hz all the way up, 4kHz at 0 dB, and 14kHz all the way up. If you don't wat the eq notification in the status bar just disable all notifications for the eq app. I hope this helps for all who don't want to root or use custom roms.
Click to expand...
Click to collapse
after using this method ive realized with loud enough songs the speakers just dont work till u disable the app... so unfortunately this doesnt work after all.

Best Way to Increase Loudspeaker Volume?

Kernels don't support it, at least Franco and E-X don't, so any way to Increase the volume dB of the loudspeaker? The output of it is really clean but more loudness (without any crackling though) will certainly do. Anyone using any mod or something like that? Not really looking for something complicated like editing some text values or anything.

ithehappy said:
Kernels don't support it, at least Franco and E-X don't, so any way to Increase the volume dB of the loudspeaker? The output of it is really clean but more loudness (without any crackling though) will certainly do. Anyone using any mod or something like that? Not really looking for something complicated like editing some text values or anything.
Click to expand...
Click to collapse
I would like to know this, too. Rings and notification sounds are not loud enough to hear well, even @Max Volume. I don't mind editing a file if I knew what file & what part to edit.

Install the Viper Driver. It resolved that issue for me.
https://forum.xda-developers.com/pixel-xl/themes/mod-weta-ui-mods-t3491181

Shawn haz root said:
Install the Viper Driver. It resolved that issue for me.
https://forum.xda-developers.com/pixel-xl/themes/mod-weta-ui-mods-t3491181
Click to expand...
Click to collapse
Can I install Viper from their topic itself? I don't all the other stuffs in this mod.

ithehappy said:
Can I install Viper from their topic itself? I don't all the other stuffs in this mod.
Click to expand...
Click to collapse
Yes, boot into TWRP and flash this zip. When you do an installer starts up and you can pick and choose the mods to flash. I would also flash the battery icon mod so you can change the battery icons to something with a more visible percentage.

Last time I tried Viper, it made the loudspeaker get loud sooner. Such as volume level 50% was louder after the mod.
But overall volume was the same at 100%. I used an SPL meter and test tones to verify.

CZ Eddie said:
Last time I tried Viper, it made the loudspeaker get loud sooner. Such as volume level 50% was louder after the mod.
But overall volume was the same at 100%. I used an SPL meter and test tones to verify.
Click to expand...
Click to collapse
.
Ah, bummer . . . I'm one of those joe schmoes who has crappy ears.
On that link to the mod package . . . ( thank you very much @Mentalmuso ! ! ! )
It lists :
mods...
V4A 2.5.0.5 or 2.3.4.0
Dolby Atmos
Sony Xperia™ Z5 Premium audio system
Beats™ libraries and effects
WETA Reboot app
3Minit Battery
Center Clock
NavBar height
Disabled high volume warning
Allow All rotations
Screen on when unplugged disabled
.
Um, it lists two V4A mods . . . Do you remember which one you tested ?

CZ Eddie said:
Last time I tried Viper, it made the loudspeaker get loud sooner. Such as volume level 50% was louder after the mod.
But overall volume was the same at 100%. I used an SPL meter and test tones to verify.
Click to expand...
Click to collapse
Hmm OK. So basically no way then!

I was just sharing my experience from a while back. Have not tested recently. I don't remember which Mentalmuso package, sorry.
Edit, I'm fairly sure it was the higher numbered version.

[NEW][MOD][v3] Dual Speaker Mod For Xiaomi Mi A1

Disclaimer :
Code:
I am not responsible for any damage to your device!
Use this mod at your own risk!
Introduction to The New Dual Speaker Mod For Mi A1!
This mod is for ROMs with 4.9 kernel. Stock ROM will not work, and I will not develop one for stock! This mod enables the earpiece to played simultaneously with the speaker for a stereo effect.
This mod will be updated to get the max out of it. So PLEASE, no ETAs asked!
Compatible Mods :
- Viper4Android
Contributors :
@Jt380p
@mitux
@rexendz
@mparmpas122321
Download :
https://drive.google.com/file/d/1HwjZHX1i8C0VO81SukCmz7sK-oTsbSVh/view? (Flash with Magisk Manager)
Source :
https://www.youtube.com/watch?v=Su9Af-jrJWQ
https://forum.xda-developers.com/android/development/mod-dual-speaker-soundmod-devices-root-t3735280
Audio files provided by @rexendz with PE CAF
Thanks to :
@Dante63 for the tutorial
@topjohnwu for Magisk
@joeyhuab for adding device check
Created : 15/4/2019
Last updated : 4/5/2019

I thought it's not woking, Can you make the earpiece sound louder?

gabwielcastwo said:
I thought it's not woking, Can you make the earpiece sound louder?
Click to expand...
Click to collapse
I just copied the settings from the earpiece. So it's obviously not going to be loud. I have to wait for my phone to be repaired and flash a custom rom again. So I can do more testings. It was confirmed working by a friend of mine, I didn't conduct any testings in person, so I don't know how it sounds.

well, i can confirm it works fine on EvoX rom, sounds good

Thanks friend!
I'll be certainly flashing this ?

berezker said:
well, i can confirm it works fine on EvoX rom, sounds good
Click to expand...
Click to collapse
How was the loudness of earpiece?

gabwielcastwo said:
How was the loudness of earpiece?
Click to expand...
Click to collapse
Too loud because the rom's default earpiece volume is 91. I had to manually decrease it to 85 in mixer_paths

berezker said:
Too loud because the rom's default earpiece volume is 91. I had to manually decrease it to 85 in mixer_paths
Click to expand...
Click to collapse
What line is the volume for earpiece sir?

fhsd22 said:
What line is the volume for earpiece sir?
Click to expand...
Click to collapse
<ctl name="DEC1 Volume" value="XX"/>
In the rom I'm using(Evolution X), the xx value is 91 so it might be different from yours
I think 85 is the sweet spot
---------- Post added at 03:35 AM ---------- Previous post was at 03:33 AM ----------
fhsd22 said:
What line is the volume for earpiece sir?
Click to expand...
Click to collapse
<ctl name="DEC1 Volume" value="XX"/>
In the rom I'm using(Evolution X), the xx value is 91 so it might be different from yours
I think 85 is the sweet spot

dont spread wrong info please
dec1 volume is not related to earpiece volume,its related to mic reciever that how well it recieves audio from different distance
it is no way going to effect output audio
if u really want to increase earpiece volume
edit rx1 digital volume value upto 91(safe limit)
2)installing okk dosent mean its working
first check if the audio really coming from earpiece??

Thanks, works fine on latest Evo, good job :good:

rkview37 said:
dont spread wrong info please
dec1 volume is not related to earpiece volume,its related to mic reciever that how well it recieves audio from different distance
it is no way going to effect output audio
if u really want to increase earpiece volume
edit rx1 digital volume value upto 91(safe limit)
2)installing okk dosent mean its working
first check if the audio really coming from earpiece??
Click to expand...
Click to collapse
How is it wrong information? DEC1 is related to earpiece volume and like i said, this is on Evolution X rom so i don't know if it differs from other roms, even the developer himself that I work with in testing is confirming this. Do some research before accusing people

i m 100% sure about what i said
no more arguement,not going to waste my reply for winning in arguement

rkview37 said:
i m 100% sure about what i said
no more arguement,not going to waste my reply for winning in arguement
Click to expand...
Click to collapse
I think I'm going to have to clean the thread. Lmao

Unfortunately the earpiece volume is too low for the difference to be noticeable.

sainth4tred said:
Unfortunately the earpiece volume is too low for the difference to be noticeable.
Click to expand...
Click to collapse
Like I've said I didn't test it on my phone, so I don't want to blow anyone's earpiece. Now that I've installed PE CAF on mine, I could test it. However, I'm trying to get my module onto magisk-repo (aka the download page), but the moderators are so strict and rude. It'll take a while before I could update it. Thanks for understanding.

WhatzIt2Ya said:
Like I've said I didn't test it on my phone, so I don't want to blow anyone's earpiece. Now that I've installed PE CAF on mine, I could test it. However, I'm trying to get my module onto magisk-repo (aka the download page), but the moderators are so strict and rude. It'll take a while before I could update it. Thanks for understanding.
Click to expand...
Click to collapse
Of course, and thank you for your work. Wasn't trying to be rude or anything, I just reported what I noticed! Keep up the work!

Does this mod provide actual stereo or is it just dual speakers playing mono?

gougous3 said:
Does this mod provide actual stereo or is it just dual speakers playing mono?
Click to expand...
Click to collapse
Just added the earpeice to play simultaneously, but it does sound somewhat stereo.

Doesn't work if AML is enabled.