Does anyone know which ROMs support diag mode?
1st - Wrong forum.
2nd - Pretty sure all of them do.
Related
Hi,
Is there any to get the diamond to work with QPST, I guess it needs the wireless modem mode?? Thanks!
DrD
Hello,
I have the same problem to connect Diamond with QPST. The Diamond of mine is WCDMA version. I have tried to dial ##3424, ##3424# and ##DIAG, but it didn't work. Besides, I put the dmrouter.exe into the phone and executed it. But there is no new com port while pressing "Start" button.
Does anyone know how to connect Diamond with QPST? Should I upgrade the rom?
Thanks in advance.
drdespair said:
Hi,
Is there any to get the diamond to work with QPST, I guess it needs the wireless modem mode?? Thanks!
DrD
Click to expand...
Click to collapse
I am pretty sure QPST is not freeware, shareware or any kind of ware for which the use is endorsed on this forum. I doubt you will get any replies here. QPST isn't really to be played with if you don't know what you are doing; or better put, if you are not a qualcomm engineer.
drdespair said:
Hi,
Is there any to get the diamond to work with QPST, I guess it needs the wireless modem mode?? Thanks!
DrD
Click to expand...
Click to collapse
With the diamond I think you have to go into wmdc and disable usb connections, put the phone into diag mode (usually ##diag# or ##3424#) and then plug it in. Should show up in the comm manager as "htc diagnostic port" assuming you're using the correct driver. It's posted somewhere around these forums I think, you can search it out.
Silent: What sys are/were you using and did flashing a new rom fix you up as far as entering diag mode?
I Need to know the DIAG mode for my Galaxy Nexus i tried the same one for the Nexus S but didnt do anything help plz
Does this chipset not have a diag mode? Its not VIA...
Hello, I have a problem, I recently purchased the live view, and I tried to update it, but I can not find the drivers, you have the link?? now my device is locked in dfu mode, and i cannot exit
Hook question. Someone knows what you can do with it?
Your device is locked in DFU mode?
Have you tried this?
http://dl-www.sonyericsson.com/cws/download/1/110/61/1323075336/Update_Service_Setup-2.11.12.5.exe
Hi,
I've tried to link my phone up to QPST but ever time I try to add new port it comes up with: There was an error enabling. The port may not be working or maybe busy.
I've put my phone into diag mode using this guide- http://forum.xda-developers.com/showthread.php?t=1619314 and it didn't give me an error so I assume it's in Diag mode.
I then booted it into fastboot went to device manager and noted down the com port (com1) and I tried to add it in QPST to be greeted with the error mentioned above.
Any help would be much appreciated as I am a beginner.
Regards,
enya123101 said:
Hi,
I've tried to link my phone up to QPST but ever time I try to add new port it comes up with: There was an error enabling. The port may not be working or maybe busy.
I've put my phone into diag mode using this guide- http://forum.xda-developers.com/showthread.php?t=1619314 and it didn't give me an error so I assume it's in Diag mode.
I then booted it into fastboot went to device manager and noted down the com port (com1) and I tried to add it in QPST to be greeted with the error mentioned above.
Any help would be much appreciated as I am a beginner.
Regards,
Click to expand...
Click to collapse
The problem is that there is no Qualcomm modem or SoC to speak of.
oh thx bro
Hi,
Thanks for clearing it up! You saved me alot of wasted time. Are there any utilities that allow me to do the stuff that QPST does? I would like to debrand the phone from all the 02 nonsense that it's been sold to me with. I've done googling and I've found custom roms debrand although I'm not confident with roms as I hard bricked my old Galaxy.
Regards,
enya123101 said:
Hi,
I've tried to link my phone up to QPST but ever time I try to add new port it comes up with: There was an error enabling. The port may not be working or maybe busy.
I've put my phone into diag mode using this guide- http://forum.xda-developers.com/showthread.php?t=1619314 and it didn't give me an error so I assume it's in Diag mode.
I then booted it into fastboot went to device manager and noted down the com port (com1) and I tried to add it in QPST to be greeted with the error mentioned above.
Any help would be much appreciated as I am a beginner.
Regards,
Click to expand...
Click to collapse
QPST is something to do with Qualcom?
This forum is for the quad core Tegra 3 One X, not the dual core Snapdragon. If you can't find the right phone, I'm not surprised you bricked one. Anyway, bricking an HTC is harder due to the bootloader, but I wouldn't recommend you try it.
enya123101 said:
Hi,
Thanks for clearing it up! You saved me alot of wasted time. Are there any utilities that allow me to do the stuff that QPST does? I would like to debrand the phone from all the 02 nonsense that it's been sold to me with. I've done googling and I've found custom roms debrand although I'm not confident with roms as I hard bricked my old Galaxy.
Regards,
Click to expand...
Click to collapse
ROMs are the only way until we can change the CID.
Please help with my bricked G3 (D855)
Hello!
i would like to ask you, that can you maybe help me with my LG G3 (D855). I live in Europa, Hungary
I bought the device as used, and i would have liked to download the latest software via wifi, then on the phone restarted, and was only the TWRP on the phone, i restarted the device again, but i could entry only in the TWRP. I downloaded a ROM from the XDA (G3 Cloudy), and i made a mistake, i installed the D851 software. The phone is bricked, no download mode. I tryed to unbrick, but every method need the download mode. If i put the device on the PC, the PC see only as modem. LGE AnroidNet USB modem, and the the port name LGE AnroidNet USB Serial Port Com4. If the battery is low, i see on the display, that show that need to charge, but nothing more life signal. If you can help me with some information or via teamviewer, i will very glad for you, and naturally also donate. As i wrote the PC sees my phone only as modem, and LGE AnroidNet USB Serial Port Com4. I downloaded the QDLoader HS-USB Driver_64bit for my PC, but i dont see Qualcomm HS-USB QDLoader 9008 between the ports.
I hope that someone can help me. Sorry for the bad english.
Have a nice day!
May be a dumb question since u don't have download mode, but can you enter recovery? If not you may be hard bricked as recovery and download are your only options and if neither work....
no, i dont have recovery mode
gogabor89 said:
no, i dont have recovery mode
Click to expand...
Click to collapse
No download and no recovery mode, seems ur hard bricked. Sorry to say, I May be wrong but I'm pretty sure. Flashing different models is detrimental.
Even though you installed the D851 version of Cloudy, you should still be able to enter TWRP. After a battery pull, you're holding down the power+volume down buttons until the LG logo appears, then releasing both and again pressing them until the Hard Reset menu displays? In the future, never take an OTA update if you have a third party recovery like TWRP or CWM installed.
I cant entry in the TWRP, no download mode, no recovery mode, nothing
can someone help me?
Give a read through this thread...
lg g3 d855 hard bricked no download mode or recovery!
http://forum.xda-developers.com/lg-g3/help/q-lg-g3-d855-hard-bricked-download-mode-t3090911
... and also through the posted links:
Unbrick - qhsusb_bulk (qualcomm 9006)
http://forum.xda-developers.com/lg-g2/general/choise-unbrick-qhsusbbulk-qualcomm-9006-t3093844
Unbrick lg g2 qhsusb_bulk(qualcomm 9006) export very partition(hdd)
http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
... both methods of which can also be applied to the G3.
Thank You!
But for me maybe that is a bit hard :/ My english inst good too. And so i wrote, i dont have qhsusb_bulk(qualcomm 9006) between the ports if i connect my phone.
Can someone help me maybe via teamviewer? I would be very very glad