Hi
I have a Sony Xperia Z 5 Premium dual e6833 model. a few days ago after about one month when i try to connect a usb flash via otg cable the usb not detected. I think after update to Android 6.0 (ota update) this problem has occured.then I download the 6.0 stock rom to flash via flash tools that i found phone can't connect to pc. Flash tools and Xperia companion can't recognize the phone however driver's installed.but Flash tools can detect phone in flashmode and fastbootmode. I flashed the 6.0 buildnumber 185 whit full wipe. But the problem not solved. Then 6.0 buildnumber 163. Then 6.0.1 buildnumber 224. Then 5.0 buildnumber 170 and all these fladhed whit full wipe. But the problem still not solved.
By the way... When I try to connect the phone to pc via usb cable it's not detecte by pc and no reaction in pc and phone. But when i turned off the phone and connect the phone to pc via usb cable and then turn on the phone Xperia companion and flash tools can recognize the phone and the pop up notification for selecting connection mode is shown in notification bar. But flash tools recognize the phone whit usb debugging off however the usb debugging is on and unknown source is active in setting.
In this situation if disconnect the phone and try to reconnect it the same problem is occured.
I tried to change the settings usb connection from setting - developer options- select usb configuration but the problem still not solved.
Please help me
Did you select the type of usb but connection on the phone? In 6.0 it gives you the various options such as charge only or mtp connection.
Robobob1221 said:
Did you select the type of usb but connection on the phone? In 6.0 it gives you the various options such as charge only or mtp connection.
Click to expand...
Click to collapse
pop up message that allow you to select the usb connection is not shown in phone. Only when I turn off the phone and connect the phone to pc via usb cable and then turn on the phone this option is shown in notification bar and everything is ok. If i disconnect the phone and try to reconnect it again the same problem is occured.
By the way usb device can't detect. When I push detect the usb device after a few minutes failure message is shown.
mizanlo said:
pop up message that allow you to select the usb connection is not shown in phone. Only when I turn off the phone and connect the phone to pc via usb cable and then turn on the phone this option is shown in notification bar and everything is ok. If i disconnect the phone and try to reconnect it again the same problem is occured.
By the way usb device can't detect. When I push detect the usb device after a few minutes failure message is shown.
Click to expand...
Click to collapse
Uninstall the usb driver on pc, forget device connection on phone, and reinstall driver via the pc companion
Sent from my iPad using Tapatalk
Hi, for the otg connection there is a quick setting. I think sony found this solution to avoid problems with the open micro usb port and the IP67 certification. Try to connect a USB key to the phone and press the search usb quick setting, worked for me!
Sent from my E6853 using XDA-Developers mobile app
bj4ever said:
Hi, for the otg connection there is a quick setting. I think sony found this solution to avoid problems with the open micro usb port and the IP67 certification. Try to connect a USB key to the phone and press the search usb quick setting, worked for me!
Click to expand...
Click to collapse
Where is this quick setting? Do you mean the detect usb device button in notification bar?
mizanlo said:
Where is this quick setting? Do you mean the detect usb device button in notification bar?
Click to expand...
Click to collapse
Yes, the detect usb device button in the notification bar
Sent from my E6853 using XDA-Developers mobile app
Related
I've successfully installed the Open Desire rom on my HTC Desire, but if I try to plug in my phone to my PC I get a windows noise (asif a USB device is connected), but no access to the actual device (e.g. the drive doesnt appear in my computer).
Any ideas on what to do? It was working fine on the same PC before installing a new rom...
Thanks.
Vistrix said:
I've successfully installed the Open Desire rom on my HTC Desire, but if I try to plug in my phone to my PC I get a windows noise (asif a USB device is connected), but no access to the actual device (e.g. the drive doesnt appear in my computer).
Any ideas on what to do? It was working fine on the same PC before installing a new rom...
Thanks.
Click to expand...
Click to collapse
enable usb debugging...
cyron_at said:
enable usb debugging...
Click to expand...
Click to collapse
Its enabled like before... my phone says its in usb debugging mode when I plug it in but theres no device available to select from my computer...
USB brick?
Sent from my Evil Lair using Doomsday Device
Ok I tried plugging into a different PC (which it hasnt been connected to yet), it goes to install the phone USB drivers and then it comes up with "USB Device not Recognised" in windows XP...
Vistrix said:
Ok I tried plugging into a different PC (which it hasnt been connected to yet), it goes to install the phone USB drivers and then it comes up with "USB Device not Recognised" in windows XP...
Click to expand...
Click to collapse
Sounds like the usb brick as mentioned above.
What recovery method did you use? Is your phone seeing the sd card?
I had the same problem, can you install from Market? I fixed the problem by changing the default install location for the apps.
http://forum.xda-developers.com/showthread.php?t=742379
Now I can connect both discdrive mode and htc sync. Latest OTA did this for me.
Hi,
I seem to be stuck on a silly problem. I don't seem to be able connect to my pc via usb.
It charges and I've got kies installed but I can't find where on the phone to change usb connection mode.
I'm running gingerice.
Any help
tmcthree said:
Hi,
I seem to be stuck on a silly problem. I don't seem to be able connect to my pc via usb.
It charges and I've got kies installed but I can't find where on the phone to change usb connection mode.
I'm running gingerice.
Any help
Click to expand...
Click to collapse
For USB Storage mode:
1. Disconnect
2. Settings->Wireless and network->USB utilities
3. Click button: Connect storage to PC
4. Plug in USB Cable
I hope it helps.
tmcthree said:
Hi,
I seem to be stuck on a silly problem. I don't seem to be able connect to my pc via usb.
It charges and I've got kies installed but I can't find where on the phone to change usb connection mode.
I'm running gingerice.
Any help
Click to expand...
Click to collapse
Do you mean adb connection or usb mass storage one?
I don't know whether you've checked this yet, but try this:
if you mean the adb, on the home screen, press: menu>setting>applications>development>check on usb debugging
if it is usb storage, refer to what mayerkemp said
or if you can see usb logo on notification bar, slide it down and tap connect storage to pc
Thanks guys,
Problem is that when I click on connect storage it either says "connect the cable to use mass storage" or if the cable is connected it says "USB is connected. Remove the cable."
Any thoughts?
Hi guy's, so I've reinstalled a backed up rom and it's fine now.
Just always check development mode on application setting, then u can change to usb storage with tap usb connected from expanded status bar, that's what I do on DXLM3
Sorry for my bad english
Okay so I want to manually update to 4.4 (I have the normal 4.2.2 for this model). So first I connect my phone to my laptop to create a backup just in case something goes wrong. And SURPRISE! USB Device Not Recognized. Tried changing the port, the wire, restarting the phone, the laptop, no change. The USB notification is also not showing on the phone, it just sees it as regular charging.
I never had this problem before... I even used USB debugging several times. I thought maybe somehow the settings changed and it's no longer set to MTP. So I go to my phone's settings and can't find the USB settings to check. Looked it up online, they are supposed to be under storage when I press the menu button. I press it and nothing happens, and the USB connection settings are nowhere to be found.
Any ideas?
Have you tried to install your phone's USB driver in your computer?
Link: http://androidxda.com/download-samsung-usb-drivers
SakoDaemon said:
Okay so I want to manually update to 4.4 (I have the normal 4.2.2 for this model). So first I connect my phone to my laptop to create a backup just in case something goes wrong. And SURPRISE! USB Device Not Recognized. ... Any ideas?
Click to expand...
Click to collapse
1. Turn on USB debugging
2. Upgrade to the newest version of Kies
3. Ensure it connects as MTP [media device] not PTP [camera]
Hi
i have been trying to upload files from my laptop to my huawei ascend p6 via USB, when it connects its on charging only, i do not receive the notification that asks me to select the mode. Also when i look into the settings the USB tethering is disable, i've tried to do the USB debugging by doing the developer options and enable the usb debugging, but when i tried to connect the mobile to the pc via usb, it is still on charging, i cannot connect my phone. What to do?. Help me out please
I bought in January s4 mini duos
At the beginning i was well without problem I plug it into my pc it is detected without problem I did all my transfer data without problem
I put a day the system to an official 4.4.2 via Odin and all is well detected without the problem
But last week it is no longer detected on pc via usb cable when I plug it will start charging but without any sign of detection of equipment or on phone or pc .
I test other cables , other pc and nothing changes and the problem persists.
Help me please
bicha2016 said:
I bought in January s4 mini duos
At the beginning i was well without problem I plug it into my pc it is detected without problem I did all my transfer data without problem
I put a day the system to an official 4.4.2 via Odin and all is well detected without the problem
But last week it is no longer detected on pc via usb cable when I plug it will start charging but without any sign of detection of equipment or on phone or pc .
I test other cables , other pc and nothing changes and the problem persists.
Help me please
Click to expand...
Click to collapse
Does it connect in download mode? (maybe also try change MTP etc) Different mode uses different USB drivers etc. Have read sometimes a USB port seems to become disabled in one mode but will work in other.
Make sure your USB driver is good. Are you using the same drivers from some "dodgy" website if so uninstall and just allow Windows to find drivers or get from samsung.
You may be able to enter the USB service menu and change settings by entering *#0808# in dialer then select MTP (or maybe *#7284# & set to PDA)
But connector/power board may have a problem
IronRoo said:
Does it connect in download mode? (maybe also try change MTP etc) Different mode uses different USB drivers etc. Have read sometimes a USB port seems to become disabled in one mode but will work in other.
Make sure your USB driver is good. Are you using the same drivers from some "dodgy" website if so uninstall and just allow Windows to find drivers or get from samsung.
You may be able to enter the USB service menu and change settings by entering *#0808# in dialer then select MTP (or maybe *#7284# & set to PDA)
But connector/power board may have a problem
Click to expand...
Click to collapse
same problem in download mode is not detected.
I changed drivers but the problem persists.
when I 'll branch pc displays a notification at the bottom next to the date indicates an unrecognized USB device.
bicha2016 said:
same problem in download mode is not detected.
I changed drivers but the problem persists.
when I 'll branch pc displays a notification at the bottom next to the date indicates an unrecognized USB device.
Click to expand...
Click to collapse
Turn phone off. Remove battery & SIM (though I think it's probably the battery that does the trick). Reassemble & your USB may be back if it's none of the other things and it's not hardware .......:fingers-crossed:
(If it doesn't work 1st time do it again but only reassemble after a minute or two to be certain all power is drained from caps etc.)