Related
Ive been searching around but cant seem to find any apps that would do this. seems to me like it would be quite simple to do. anyone know o something similar to able to quickly put something together?
Main reason at the moment is that i currently have a long wire diagonaly across my room to connect my laptop to my speakers. I just thorght it would be realy good if i could plug my phone into my speakers and then send music to it via bluetooth. Im sure other people have been in this situation where an audio cable has not quite been long enough.
Might be a bit harder but possibly this could work over wifi too and would be able to work from room to room. I expect this would require a pc client though..
any thorghts?
I would love to have something like this. The phone would behave like a bluetooth speaker or headphone (A2DP). This would be fantastic. I was looking for something like this a year ago, I thought I would find a software which helps me do this, but I was unable to find anything then. Maybe we can find something now.
I could try developing such a software if there is not anything of this sort already available. I would be glad if any experienced developer can provide us some starting points, keywords, etc., which would speed up the initial activities.
Use UPNP media server
the simpler solution is to use unpn media server over wifi networks
like twonkys media server. or xmbc
basically the computer where the files are stored will server the files to any network attached device including HTC through webbrowser.
I have my dish tv /Satellite decoder connected to home pc using vlc and watch the tv on my HTC HD using VLC
for sound files i directly load them over network disk
Anil
Bluetooth Audio Receiver
I've got a TV which supports bluetooth headphone. With such a software, I'd be able to use my HTC HD2 as a bluetooth headphone. This should turn the phone into a bluetooth audio reciver, rather than a transmitter.
I've been looking for this software for ages and appreciate any ideas.
pranil said:
the simpler solution is to use unpn media server over wifi networks
like twonkys media server. or xmbc
basically the computer where the files are stored will server the files to any network attached device including HTC through webbrowser.
I have my dish tv /Satellite decoder connected to home pc using vlc and watch the tv on my HTC HD using VLC
for sound files i directly load them over network disk
Anil
Click to expand...
Click to collapse
yea this would have been good. was halfway through downloading xmbc when i realised it wont work in my case.. im at university and the wireless has some security issues that wont let it connect to my phone
also wireless drains quite a bit more battery than bluetooth and would probably have to plug in the phone each time you do this.
some great links though, now we need some bluetooth ones!!!
Is this what you need?
http://beemer.sesma.eu/en/btaudionav.htm
Let's see if I get that right:
You want to send BT stereo audio from your BT-enabled laptop to your phone, and plug your phone into speakers for audio output. Right?
Might be easier to get a bluetooth receiver for your speakers. There are some for your home audio system (e.g. at amazon).
What I did was get a stereo bluetooth headset receiver. You can use it as a bluetooth headset (in your car, on the bus, wherever) OR you can simply plug it into your speakers. Just be sure to find one with a 3,5mm plug (and not wired-on headphones) so that you can use your own headphones or plug in your speakers. There's a choice of fine receivers from
Nokia (BH-214, BH-500, ...)
SonyEricsson (HBH-DS205, HBH-DS980, ...)
Jabra (BT3030, ...)
or you can try and get a cheap but great one from the itech clip series.
HTH.
N.
jonhdoe11112 said:
Is this what you need?
http://beemer.sesma.eu/en/btaudionav.htm
Click to expand...
Click to collapse
no, I dont think so. thanks for the suggestion though!
we arnt trying to get sound from the phone to a bluetooth speaker but instead turn the phone itself into a speaker whcih can recieve audio from other bluetooth devices.
for example if watching a film on my laptop, i would like to plug my phone into my speakers, connect up the bluetooth, and watch rather than running a cable to the speakers which are a long way away.
Nik, you bet me by one...
Nightcookie said:
Let's see if I get that right:
You want to send BT stereo audio from your BT-enabled laptop to your phone, and plug your phone into speakers for audio output. Right?
Might be easier to get a bluetooth receiver for your speakers. There are some for your home audio system (e.g. at amazon).
What I did was get a stereo bluetooth headset receiver. You can use it as a bluetooth headset (in your car, on the bus, wherever) OR you can simply plug it into your speakers. Just be sure to find one with a 3,5mm plug (and not wired-on headphones) so that you can use your own headphones or plug in your speakers. There's a choice of fine receivers from
Nokia (BH-214, BH-500, ...)
SonyEricsson (HBH-DS205, HBH-DS980, ...)
Jabra (BT3030, ...)
or you can try and get a cheap but great one from the itech clip series.
HTH.
N.
Click to expand...
Click to collapse
to be honest ive actualy already ordered this:
http://shoponspot.com/bluetooth-20-a2dp-avrcp-stereo-music-receiver-and-handsfree-black/
I still would like to see this app developed as i can imagine future situations where this happens and i dont want to have to carry this around everywhere.
also people with bluetooth tvs im sure would prefure not to have to use another device all the time and occasionaly you get bluetooth headset transmitters in public places where this might be useful.
hope it is possible!
ooo wow! im a senior member now!!
well i received my bluetooth headset but unfortunatly it charges through the 3.5mm headphone jack so i am unable to leave it there to just work
Ive also tried plugging in a headphone splitter but it realy dosnt like that!! so that means every time i leave my room i will have to put the reciever on charge and every time i return i will have to turn it on and plug it in.
does anyone know if it would be possible to get the phone to work as a bluetooth audio reciever? seems like something it should be able to do
I'd like to bump this because I've been searching for ages for exactly this. I'd personally like to go one step further and have a client that would support A2DP and the handsfree protocol. The latter I would like to allow me to answer and initiate calls to my work mobile using my HD2 as though it was a bluetooth handsfree kit. Then I could use one phone for all my calls.
I can imagine a wide range of useful applications that other solutions like wifi audio streaming or a dedicated bluetooth audio receiver wouldn't match.
I wish I knew how to write software... Maybe if I ever have a few hundred hours of spare time on my hands I'll learn and write an app to do this.
i also want this.
please anyone help.
This would be great.. i currently have an nvidia shield tv and I can plug my normal wired headphones into the nvidia shield's bluetooth remote. The problem is the remote's battery life only lasts a few days when used like this. I would love to be able to use my mobile phone as a back up for when the nvidia remote battery dies. For some reason the nvidia remote won't charge unless my head phones are unplugged.
Hooroo
Just recently got a Touch Pro 2 (t mobile, unlocked) and, being a previous Fuze owner, that I could install a cab (to the fuze) to force tv-out. Then, using the dongle and a cheap 3.5mm to video out cable, I could then use the tv out option as if I had actually purchased the video out cable. Is there such a cab for the touch pro 2? I loaded the enablevideoout.cab from fuze, however, while it does enable that option, no video comes out to the tv, even though I'm using the exact cable...
tv out doesnt work for me either. im not sure why. some people have it working though.
I have the AT&T Tilt 2 and purchased the Tilt video cable. The cable was inexpensive ($15 or so) and works perfectly. I select the TV Out under System and it works perfectly.
whats the purpose of tv out
1milenia said:
whats the purpose of tv out
Click to expand...
Click to collapse
you can stream whatever is on your phone to a tv or moniter. it's a great tool for businessmen with presentations, or you could download and stream adult content .
So...is there a cab that would force tv out?
Is the $15 cable the only way to get it to work?
Is there anyone that actually uses this option!!???? I remember back with the fuze that TV out was all the rage...wha happen'????
i can get tv out on my fuze but not on the tilt 2.
i'm using the oem htc tv out cables on my sprint tp2. no hacks or tweaks needed, just plug it in and go. it also has a charging port on the side, so you can stream and charge at the same time. darrenwlsn1 has a thread at ppcgeeks where you can get them for $10 u.s. shipped.
if you have the dongle that came with the tp, check this out http://forum.ppcgeeks.com/showthread.php?t=91682&highlight=tv*
Thanks...seems as if it will be the blue wire that will meet its maker...
telegraph0000 said:
Just recently got a Touch Pro 2 (t mobile, unlocked) and, being a previous Fuze owner, that I could install a cab (to the fuze) to force tv-out. Then, using the dongle and a cheap 3.5mm to video out cable, I could then use the tv out option as if I had actually purchased the video out cable. Is there such a cab for the touch pro 2? I loaded the enablevideoout.cab from fuze, however, while it does enable that option, no video comes out to the tv, even though I'm using the exact cable...
Click to expand...
Click to collapse
Sorry, telegraph. Since I was the guy the discovered the hack in the first place and have now graduated to a Touch Pro2, I can confirm without a doubt that the registry change the above mentioned cab implements won't make TV Out work with the ipod cables.
You'll either need to cut wires on the dongle or get the OEM TV Out cable for the TP2.
The TV-out option is THE ONLY reason why I got the Touch Pro 2 - here's why...
My in-dash car DVD/Nav system includes a "Video In" (and L, R audio in) jack that will display any video on it's 9" LCD screen, plus play any audio through my stereo system in the car.
Forget Flow TV or Cio digital TV services and subscriptions!
I just connected a Slingbox to my home Tivo TV system, bought the slingplayer app for the touch pro 2, got an unlimited data plan for my TP2, and connected my TP2 to my in-dash DVD system using the HTC video cable.....and now I can watch ANY cable channel I get at home LIVE, PLUS watch any Tivo show I recorded, in stereo, in my car! Soooo sweet Youtube videos look awesome too. Any app that runs on the TP2 can now appear in my dash's screen with full stereo audio.
XM/Sirius radio sucks with it's 64k bitrate quality! So, as a side bonus, both nanogroove and slacker radio apps for the TP2 sound like they use 96-128k bitrate so they sound excellent in the car. I drive around all day and listen to crystal-clear tunes for free, and can skip any I don't like instantly (using slacker radio) or call up ANY song using nanogroove!
Yay!!!!!!!
Sorry to sound like a guy finding his first chest hair, but a gentle squeeze on the dongle allowed it to ever so nicely open up, where I proceeded to cut zee blu wire...tv out works great-now, a question:
Is it just my dongle or are connections to the phone (via the mini usb) somewhat loose? A slight move (even with just headphones) causes static, I remember (fuze) that the connection was snug and the phone (even sideways) would still hold its own with regards to restricting movement.
and that, sirs, is a run on sentence.
Edit: When I do connect the phone to a tv, the screen is Portrait, and so are any movies I play (even though they should be playing landscape)...the only way I get them to turn correctly is by editing hklm/software/htc/h2w and changing a tv out value to 1...after unplugging the cable, I have to go back and change that same value to 0...
I'm sure i'm doing some extra unnecessary step...
telegraph0000 said:
Edit: When I do connect the phone to a tv, the screen is Portrait, and so are any movies I play (even though they should be playing landscape)...the only way I get them to turn correctly is by editing hklm/software/htc/h2w and changing a tv out value to 1...after unplugging the cable, I have to go back and change that same value to 0...
I'm sure i'm doing some extra unnecessary step...
Click to expand...
Click to collapse
That registry entry is what the cab flips back and forth for you. Just install the cab...
Does anyone have a car stereo with a USB port? If so can you elaborate on what that is like to use? I am purchasing a new unit and that feature is one I do not truly understand. A few questions I have are listed below, but feel free to add anything else you think might be useful in making this decision.
1: Does the phone charge while connected to a USB port on a stereo?
2: Can you use the file system and player controls through your stereo or do you have to control the music and other audio through the phone itself?
3: Does the audio work from all sources with a USB connection(for example phone calls or turn by turn), or will it only play music player audio?
4: If you do have access to the file system from your stereo, will it display song titles and artist info etc? How cumbersome is it do control this way?
Landara said:
Does anyone have a car stereo with a USB port? If so can you elaborate on what that is like to use? I am purchasing a new unit and that feature is one I do not truly understand. A few questions I have are listed below, but feel free to add anything else you think might be useful in making this decision.
1: Does the phone charge while connected to a USB port on a stereo?
2: Can you use the file system and player controls through your stereo or do you have to control the music and other audio through the phone itself?
3: Does the audio work from all sources with a USB connection(for example phone calls or turn by turn), or will it only play music player audio?
4: If you do have access to the file system from your stereo, will it display song titles and artist info etc? How cumbersome is it do control this way?
Click to expand...
Click to collapse
It would be helpful to know what actual head unit you're getting. But I will try to answer most of the questions as best I can since I have a fairly new Pioneer HU.
1. Yes, but it only charges on "USB" mode, not "AC".
2. Yes and no. The Pioneer HU that I have does NOT support MTP mode (which is what Jelly Bean, and I believe ICS) uses. Basically MTP is the protocol for storage on the Galaxy Nexus. If you can find a ROM or Kernel or any way to change the mode to "Mass Storage", then you'll be able to browse the file system.
3. Only music (or whatever else is inside your MP3 file). When you connect to your HU through USB, your phone basically turns into a flash drive. From there you have to navigate to your "Music" folder and tell it what to play. The only way to do calls, navigation and music at the same time is to use Bluetooth or a 3.5mm cable with an inline mic.
4. It displays what is inside your ID3 tag inside the MP3 file. So basically, if you have all the info filled in, then yes, it will display it. As far as how cumbersome it is, it takes some getting used to, but not to bad (on Pioneer, I have no idea on any other brand).
Short answer: Unless your stereo support MTP or you can find a way to force "Mass Storage" (which I'm not familiar with a way how), your stereo will only charge your phone. It sucks, but that's the way it is.
Pioneer has the app radio which will control your phone and also allows you to use Pandora on the actual H/U. That said I have never used it nor do I plan on it as its a dual din and I am just happy using bluetooth.
I have a JVC unit that works great with my nexus running linaro aokp jelly bean. The unit is x50bt. It will not play through USB only charge. However it is Bluetooth enabled so it can play anything including you phone calls through your car stereo. I have it setup so that my phone auto connects and plays Pandora automatically. The head unit displays song title and artist and also allows u to thumb up or down using the remote conyrol. I also have playlists set up in power amp for my MP3s. The built in equalizer in power amp along with the equalizer in the head unit work well together. I have the USB cable in the rear USB port so it is hidden in my CRZ. The tiny Bluetooth adapter is in the front and does not look out of place.
Sent from my Galaxy Nexus using Tapatalk 2
nastystang05 said:
I have a JVC unit that works great with my nexus running linaro aokp jelly bean. The unit is x50bt. It will not play through USB only charge. However it is Bluetooth enabled so it can play anything including you phone calls through your car stereo. I have it setup so that my phone auto connects and plays Pandora automatically. The head unit displays song title and artist and also allows u to thumb up or down using the remote conyrol. I also have playlists set up in power amp for my MP3s. The built in equalizer in power amp along with the equalizer in the head unit work well together. I have the USB cable in the rear USB port so it is hidden in my CRZ. The tiny Bluetooth adapter is in the front and does not look out of place.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Per your suggestion, I purchased the X50BT. I am not disappointed. As you said, it does not support MTP, however I have a tiny 32gb Flash Drive(about the size of the Bluetooth Dongle) inserted in the front and the audio quality is simply breathtaking. I have my phone set to auto-connect via Bluetooth, which it does seamlessly. It even connects for audio however the BT audio stream sounds terrible when compared to the USB audio from the flash drive. I don't know if that's a limitation of my phone, the technology or the unit but it hardly matters since I can fit all of my music on the USB drive anyway. I just have to use Bluetooth or the 3.5mm jack for Pandora. Thanks for the suggestion, I really love this head unit!
Landara said:
Per your suggestion, I purchased the X50BT. I am not disappointed. As you said, it does not support MTP, however I have a tiny 32gb Flash Drive(about the size of the Bluetooth Dongle) inserted in the front and the audio quality is simply breathtaking. I have my phone set to auto-connect via Bluetooth, which it does seamlessly. It even connects for audio however the BT audio stream sounds terrible when compared to the USB audio from the flash drive. I don't know if that's a limitation of my phone, the technology or the unit but it hardly matters since I can fit all of my music on the USB drive anyway. I just have to use Bluetooth or the 3.5mm jack for Pandora. Thanks for the suggestion, I really love this head unit!
Click to expand...
Click to collapse
If you're rooted, you have to tweak the Bluetooth sound profile using voodoo or DSP manager for example (which one your kernel allows).
You could add some "gain" amp or reduce the "Mids" and raise the "Bass"..
I have a different sound presets for the:
-Phone speaker (added some mids)
-Headphones (optimized for my Sony headset)
-Blueooth (lots of bass and "Rock" setting, sound is pretty good)
Possible Helpful Info on UMS & MTP
Landara said:
Does anyone have a car stereo with a USB port? If so can you elaborate on what that is like to use? I am purchasing a new unit and that feature is one I do not truly understand. A few questions I have are listed below, but feel free to add anything else you think might be useful in making this decision.
Click to expand...
Click to collapse
This thread might have some helpful info. (especially if the OP dev actually wrote the code for it).
(just tryin to help
danielsaenz said:
2. Yes and no. The Pioneer HU that I have does NOT support MTP mode (which is what Jelly Bean, and I believe ICS) uses. Basically MTP is the protocol for storage on the Galaxy Nexus. If you can find a ROM or Kernel or any way to change the mode to "Mass Storage", then you'll be able to browse the file system.
Short answer: Unless your stereo support MTP or you can find a way to force "Mass Storage" (which I'm not familiar with a way how), your stereo will only charge your phone. It sucks, but that's the way it is.
Click to expand...
Click to collapse
I just wanted to point out that even if you found a way to force USB Mass Storage, it is unlikely that your radio would be able to read the filesystem. Most radios will only read FAT file systems, while the Nexus uses EXT3 (I think, could be 4). So Bluetooth/AUX are really your only options.
Gnex to HU
Landara said:
Does anyone have a car stereo with a USB port? If so can you elaborate on what that is like to use? I am purchasing a new unit and that feature is one I do not truly understand. A few questions I have are listed below, but feel free to add anything else you think might be useful in making this decision.
1: Does the phone charge while connected to a USB port on a stereo?
2: Can you use the file system and player controls through your stereo or do you have to control the music and other audio through the phone itself?
3: Does the audio work from all sources with a USB connection(for example phone calls or turn by turn), or will it only play music player audio?
4: If you do have access to the file system from your stereo, will it display song titles and artist info etc? How cumbersome is it do control this way?
Click to expand...
Click to collapse
I just installed an Alpine HU, It is also does not support MTP. I really like using the Bluetooth but have found that I have to reboot my Gnex and or restart my car to get the Bluetooth to sync correctly. USB does charge but it is slow. One thing to look for is Bluetooth Parrot.
gkaurin said:
I just installed an Alpine HU, It is also does not support MTP. I really like using the Bluetooth but have found that I have to reboot my Gnex and or restart my car to get the Bluetooth to sync correctly. USB does charge but it is slow. One thing to look for is Bluetooth Parrot.
Click to expand...
Click to collapse
I have found if you just toggle the Bluetooth on and off on your phone it should sync.
Sent from my Galaxy Nexus using Tapatalk 2
I am finding that it is more of how my HU looks at my blue tooth. Thus restart car. I am wondering if it has something to do with Android BT. My gnex has worked this way with multiple roms and BT enabled HU.
Sent from my Galaxy Nexus using xda premium
I bought a cheap stereo from Wal-Mart a Dual stereo with Bluetooth, takes a SD card, front and back inputs and satellite compatible. It has the USB plug that charges but like the others, doesn't read the memory on the phone. I stream through Bluetooth all of the time with Spotify. My son's Galaxy SIII can connect too if I turn mine off without changing anything. It was a great investment. It is a convertible and the microphone works great at 70mph with the top down. For $118 I am very happy.
Sent from my Galaxy Nexus using xda premium
I don't believe the Galaxy Nexus will work with the USB of many head units since the Nexus uses MTP instead of UMS.
Hopefully someone can come up with a UMS for the Nexus.
Sent from my Galaxy Nexus using Tapatalk 2
infazzdar said:
I don't believe the Galaxy Nexus will work with the USB of many head units since the Nexus uses MTP instead of UMS.
Hopefully someone can come up with a UMS for the Nexus.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I think the better way would for HU to be able to connect like they do to Apple products and have MTP support.
HU
I know that JVC / Ken-wood have apps for android. Looked more like a HU controller rather then playing from android. Never tested.
I think I figured why my USB isn't connecting from the AVH 4000 NEX to my galaxy note 3 SM-N900. It's possibly due to the MTP mode. I believe if the was a mass storage mode that will work, kinda like a USB stick. I don't think the firmware in my HU is properly picking up MTP, all it does is charge the phone. You need a kennel that has UMS enable for mass storage however the international note 3 SM-N900 currently does not have such kernels. There is only 3.... To my surprise. Maybe the last time I ever go with international models again. If anyone finds away around this let me know thanks.
My car does not have USB or card reader, but aux line!.
So I decided to go cheap and buy a Vieta FM Car Transmitter and BT Handsfree unit, and I does a decent job.
Perhaps in a future I'll go for a Parrot...
Hey everybody,
I don't have my Fire TV (the launch in Germany is still 2.5 weeks away) but I do have a question.. at least temporarily I'd like to connect it to an older monitor of mine which only has DVI input (I don't own an actual TV at the moment.. well, a tube tv set for my SNES ). I do have an HDMI->DVI cable but I just realized that I won't get any sound this way.. and since the speaker I want to use don't have optical input I have to find another way to connect those. One option would be a digital-analog converter (like this one, for example: http://www.aliexpress.com/item/Digi...-Audio-Converter-Adapter-DHTV/2032388430.html) but someone mentioned that it's possible that the Fire TV works with regular USB sound cards which would be cheaper and not require yet another power plug and a bunch of cables.
I realize it's not an optimal setup at all, bus as I said, it's temporary. Has anyone tried this or maybe have a cheap usb sound card lying around they'd be willing to test for me? Tried the search function but didn't get any results.
kind regards
jpde said:
Hey everybody,
I don't have my Fire TV (the launch in Germany is still 2.5 weeks away) but I do have a question.. at least temporarily I'd like to connect it to an older monitor of mine which only has DVI input (I don't own an actual TV at the moment.. well, a tube tv set for my SNES ). I do have an HDMI->DVI cable but I just realized that I won't get any sound this way.. and since the speaker I want to use don't have optical input I have to find another way to connect those. One option would be a digital-analog converter (like this one, for example: http://www.aliexpress.com/item/Digi...-Audio-Converter-Adapter-DHTV/2032388430.html) but someone mentioned that it's possible that the Fire TV works with regular USB sound cards which would be cheaper and not require yet another power plug and a bunch of cables.
I realize it's not an optimal setup at all, bus as I said, it's temporary. Has anyone tried this or maybe have a cheap usb sound card lying around they'd be willing to test for me? Tried the search function but didn't get any results.
kind regards
Click to expand...
Click to collapse
I wouldn't even bother using an external DAC connected to the optical out if you re planning
to use an HDMI to DVI adapter. I, and a few others, have discovered out that the FireTV does
not support HDMI to DVI because of HDCP. Amazon video content will not display on the monitor
at all, and video from XBMC results in many dropped frames and video instability. You will also
not get any sound out of the optical. The only way to get around this is to find an HDMI splitter
or switch which will emulate HDCP, and that will cost.
Saying that, I would assume that the same would happen with USB audio (if supported), although
I have not tried it myself.
Thank you for the quick reply, it was just in time to cancel the order I placed for a cheap toslink-rca adapter
Will I at least be able to set up and tinker with the Fire TV? If I can't use it properly at my own place until I get an actual TV I thought I might give it to my mum for the time being, but I wanted to set it up first cause she probably won't be able to do that
jpde said:
Thank you for the quick reply, it was just in time to cancel the order I placed for a cheap toslink-rca adapter
Will I at least be able to set up and tinker with the Fire TV? If I can't use it properly at my own place until I get an actual TV I thought I might give it to my mum for the time being, but I wanted to set it up first cause she probably won't be able to do that
Click to expand...
Click to collapse
Yes... it still makes a nice box to tinker with. That's what I did before
getting a HDMI switch to bypass the audio issue with DVI. You just
won't get any audio and video playback will be unstable to non-existent,
depending on the source. However, all the FTV menus will still display
fine, and so will games and other apps.
The only other thing to note is that since video will not display properly,
you will not see the opening video when you first activate your FTV:
you will get a blank screen. This made me think that I had issues with
the device and that it had crashed, but you really have to just wait through
it. However, I don't know what repercussions this may have on activating
your device if you are trying to avoid the automatic updates to non-rootable
firmware versions during initial setup.
I'd assume it's going to ship with new recent firmware, but thanks for the heads up, I'll set it up at work then, there I've got access to a display with HDMI input
edit:
Or I'll just block the firmware update thingie at home, following these instructions.
Any news on USB audio?
Did someone try XBMC and USB audio out? I have a pure Digi Amp and like to have volume control. I assume optical out is without volume control...
Cheers,
Andy
Hi!
I have a TCL BeyondTV2 (C715) and a Harman Kardon AVR 171s, that has HDMI ARC capability. My brother who owned the system before used it without problem with a Sony Bravia TV (I don't know the exact model) through HDMI ARC. (I think he only had an issue that the AVR could not turn on with CEC only off, but I think he just misconfigured it)
Now I have the AVR and tried to use it with my TCL C715 through ARC, but with no luck. I have all CEC and everything set up, and it is works... for about 10 minutes, when the TV switches back to speakers, and TV remote stops to relay volume up and down controls to AVR. If I switch the input on the AVR from HDMI to something else and back, sometimes it comes back for another 5-10 minutes.
If I use the AVR with S/PDIF the audio is fine, but obviously I cannot control it with my TV remote so, I have to use 2 remotes and separately switch on everything. It is annoying
I recently updated the TV's system to V8-R851T02-LF1V715.000032, but it did not fixed the issue.
I think i have the latest update on the AVR.
Did someone encountered this problem? Does anybody have ideas how I could debug this? I did not find any related posts on the forum, but maybe I missed one. I have ADB set up, so if there is a way to get logs I would be happy to (I did not see anything with logcat, but maybe I used it incorrectly)
Any ideas appreciated!