Develop Bugs

[Request] (P600) LAN Drivers from NotePro Firmware. .....

Hi Mates! I see, a lot of converts are around here for Note Pro Firmware Apps and Tools for using it on P600. I try out a lot of Hardware adapters and docking stations to find any solution to use Usb and power charging at the same time. And I figure out, that it's really strange, strange with the p600/601 usb Adapter. The Multimedia Dock from Samsung, which was build for Note 2.... works with note 3, but not with the p600..... It doesn't accept it as any docking station, no charging, nothing. The new desktop docking station is accepted from both , note 3 and p600 as a docking station. .... (But don't have any usb). Other adapters with USB and micro USB built in for charging, won't charge. .....
But at last, I try out the Lan to usb adapter from Samsung, built for Note tab pro. And....... It completely works with p600.... charging and usb at the same time. ... strange. .... It have 2 USB ports, a power in, like on note 3 (usb3), and also a RJ45 Lan input. Everything on this adapter works, but if I get a lan cable inside, nothing happens. ...... in another thread I read about the Google nexus, that work with a similar adapter, without any drivers or any app. Just lan cable in, and there is Internet connection. And they wrote, that the lan drivers are already built in from Google to Android. ......
So, why it won't work on the p600? Can anyone check out, that the note pro (all versions) have any drivers or anything else in system, that make it possible to use a lan to usb adapter? Or is it maybe just a failed port in the USB adapter? I don't think so. ....I think, that Samsung have build in an by driver in the firmware of note pro, to understand the RJ45 Ethernet protocol, ipv4 and ipv6......
If you can help, it would be phantastic.....!
Gesendet von meinem SM-P600 mit Tapatalk

Mhhh no one knows something about, or nobody is interested in this. ..... but my English is very bad also, but I hope, the main essence is clear...? The samsung adapter, I wrote about, is build for the note pro series , all tablets. It works completely withe the 10.1 2014 editoon also...completely? Not really completely , cause the Lan input doesnt do anything, if you put a rj45 cable inside.
And Google Nexus seems to have ethernet drivers allready in Android. And nexus have the pure Android inside, so why this drivers are not also in the Samsung Android Firmware?
Or do Samsung it explizit build in to their Pro Models? If yes, then it should he possible to transport it into a 2014 10.1 custom Rom....?
I'm clear, that it isn't sooooo very important for a tablet to have ethernet support, but sometimes , if there is a caboe, that can be used, it would be fine, having stable and fast connection, LAN Connection to the network,faster downloads, connecting ro other devices with ipv4 preferences.......and better vpn connection.....
Or write
So, if someone have a note pro, pls check out the system applications, if there are any files like rj45 driver, ethernet drivers, ore

Hi, much poeple are interseted in! So i do!
It will realy intersting to get a "patch" to get ethernet fonctions like on note pro 12.
Is some one can portable on a rom or other...
Envoyé de mon SM-P600 en utilisant Tapatalk

mhl

does the g4 support mhl

PunishedSnake said:
does the g4 support mhl
Click to expand...
Click to collapse
I have one for the note 4 and i have one I've used for the z ultra. Neither work.

shigga said:
I have one for the note 4 and i have one I've used for the z ultra. Neither work.
Click to expand...
Click to collapse
Have you tried slim port adapter? My g4 wont be here for about a week to test.
Add: After googling what the Lg G3 had, which was a slimport I checked LG's website. It says it uses "HDMI SlimPort(4K)".
http://www.lg.com/uk/mobile-phones/g4/specifications.jsp

Has anyone picked up a slimport adapter for the g4? Looking for one that is guaranteed to work.
Sent from my LG-H811 using Tapatalk

I have a slimport adapter, but I am not even seeing where the setting is... Does anyone know?

BrettB0727 said:
I have a slimport adapter, but I am not even seeing where the setting is... Does anyone know?
Click to expand...
Click to collapse
What setting are you looking for?
I tried my slimport (not MHL) adapter and it worked the same way as for the G2. Screen mirroring on the TV. When playing videos using the built in video app they only play on the TV.

Link to it?

PunishedSnake said:
Link to it?
Click to expand...
Click to collapse
Me? Here.

Alright, pulled my Slimport Adapter out of my Pioneer App Radio and it doesn't work with my TV either. This same adapter worked with my Nexus 4.

All LG Flagship are enabled with Slim-Port - Connecting Technology.
LG G4 is in list of the official slim-port Supported Devices here: www.slimportconnect.com/slimport-supported-devices/.
---------- Post added at 07:47 AM ---------- Previous post was at 07:18 AM ----------
mad212 said:
Has anyone picked up a slimport adapter for the g4? Looking for one that is guaranteed to work.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Recommend this from Amazon.com and also found a tutorial video at YouTube.com here.

Frigidazzi you said your phone would be there in about a week, that was 4 months ago? This can't be that hard I am still screen mirroring from my s3 as my s5 was stolen but my g4 does not work with this adapter or any of the other 4 that I have tried. This can't be this difficult if I don't accomplish something this week I will use my 14 day option and return this phone. Anyone have any answers?

I have a taiwan 815 and i bought a combo slimport adapter which has a card reader and USB OTG it works fine
http://www.amazon.com/COOMAX-Slimport-Adapter-Reader-Support/dp/B00X489W6S

You might need a 5 pin to 11 pin adapter. Your mhl cable might be a 1.0 which is older tech

Lg4 mhl
PunishedSnake said:
does the g4 support mhl
Click to expand...
Click to collapse
Lg4 does support mhl. It requires a slimport MHL. I just bought an Accell slimport Mhl. Works perfect. It took a few trys before I found this. Also, Lg4 supports 4K.

Is MHL micro usb to hdmi compatible with the LG G4 and LG G tab?

MHL?

Hi,
anyone having some experience with the TabS2 en MHL HDMI?
Thanks

No but I'd be interested to hear if anyone has?
Thanks

Yes.
bought a small cable (6€) ....
tried one time ... works fine...
take care : in my case HDMI must be powered using a usb cable.
nothing to modify in settings..

I use MHL all the time. It does not fill the screen entirely as my phone MHL image does, but maybe that's the aspect ratio of the tab. My TV allows changing of the aspect ratio to adjust fit properly. Unfortunately my 3D projector does not allow tuning from an HDMI source. I have both 2.0 and 3.0 Samsung MHL adapters and they work fine with this tab.
http://www.gsmarena.com/samsung_galaxy_tab_s2_9_7-7438.php

I'm using a Rocketfish MHL adapter with the included Samsung adapter and USB power. It's working perfectly.
Sent from my XT1575 using XDA Free mobile app

hi,yes i have the Samsung mhl and works perfect with usb and keyboard

What about mhl to vga for projectors?
Sent from my SM-T817V using Tapatalk

averamj said:
I'm using a Rocketfish MHL adapter with the included Samsung adapter and USB power. It's working perfectly.
Sent from my XT1575 using XDA Free mobile app
Click to expand...
Click to collapse
which mhl u r using please tell me so I can purchase same for my device?
another thing do u have any idea regarding micro usb to vga for same device
Samsung galaxy tab s2 9.7" sm-t815y?
please write me on my email [email protected]
thanx in advance
---------- Post added at 03:27 PM ---------- Previous post was at 03:14 PM ----------
need a micro usb cable to vga or hdmi for connecting projector with Samsung galaxy tab s2 9.7" sm-t815y?
please help me......
[email protected]

No MHL with new Galaxy Tab S2?
I have just got Galaxy Tab S2 9.7" LTE T819 which is sligtly refreshed version of T815 with Android 6.
MHL does not work. There is no HTML option in the menu.
Samsung pages are inconsistent. Some claim that MHL is suporrted, some other - it is not.
Is it the question of hardware "improvement" from T815 to T819?
Or is it due to "upgrade" of Android 5 to 6?
Grzegorz

Same here.
Got the 819 model and mhl is not working. Same cable works with older Samsung tab (tab 3 8.0 inches), which should have same mhl version.
Either was removed with marshmallow update or it is removed due to hw revision.
Samsung website says it is supported, but clearly ain't true for my model.

I've got official Tab S2 dock and the original Samsung MHL 3.0 dongle - all work through HDMI (on the original 2015 version). However, you have to put up with the 4:3 screen ratios even on the 16:9 monitors..

Exactly how?
bchliu said:
I've got official Tab S2 dock and the original Samsung MHL 3.0 dongle - all work through HDMI (on the original 2015 version). However, you have to put up with the 4:3 screen ratios even on the 16:9 monitors..
Click to expand...
Click to collapse
I have all of this and have been trying since I got my tablet, nothing shows up on the screen. Do you have to do something to the tablet or something to make it show up?

Mamaj8578 said:
I have all of this and have been trying since I got my tablet, nothing shows up on the screen. Do you have to do something to the tablet or something to make it show up?
Click to expand...
Click to collapse
Sorry for not answering you (I only rarely visit XDA) - I havent added any apps to make it work. Its very much plug and play. Which version do you have? The 2015 Exynos or the 2016 Snapdragon? I've got the 2015 version.
I have also found it particular with certain screens and monitors too. Some do not report back to the device properly for resolution choice, whilst others will bawk at the tablet being on a non-standard 16:9 resolution. But it does work with my TV at home and my 4K monitor at work. I'd suggest you also try it with other monitors and TV's directly via HDMI.

There's a root app called SecondScreen which works well for aspect issues.

i have 2015 samsung galaxy tab s2 9.7 inch and mhl cable, micro, charger, hdmi output to hdtv, but i get a no signal on my hd tv, any clues as to why i thismodel compatible yes or not. if yes can you tell me the adapter to use. I use a mhl 5 pin adapter i picked up for $8 on ebay., but i dont know if that is the correct mhl adapter.

tino111 said:
i have 2015 samsung galaxy tab s2 9.7 inch and mhl cable, micro, charger, hdmi output to hdtv, but i get a no signal on my hd tv, any clues as to why i thismodel compatible yes or not. if yes can you tell me the adapter to use. I use a mhl 5 pin adapter i picked up for $8 on ebay., but i dont know if that is the correct mhl adapter.
Click to expand...
Click to collapse
you need samsung adapter if you use generic mhl.
samsung pin is different than generic mhl.

FYI:
Samsung online support chat ref#: 8214559545
My Question:
“Does the Samsung Multimedia Dock for Samsung Galaxy Tab S2 8.0/9.7 support HDMI screen mirroring using the tablet 819 model ? Some members of the XDAdevelopers forum cast doubt on whether it works.”
Your Samsung Multimedia Dock webpage say’s it supports Galaxy Tab S2's but does not explicitly confirm model variations, and it also say's "4K resolution is only supported by MHL 3.0 support devices (MHL 2.0 or 1.0 devices support FHD)"
Sumsung Support Answer:
“Upon checking on the technical specification of the device, MHL is not supported by your T819 tablet.”
and
“You can only use screen mirroring using Wi-Fi. I apologize but it will not work. Both devices needs to have MHL capability, however, your Tab S2 T819 doesn't have this feature.”
.... Para Dox

Sumsung Support Answer:
"Upon checking on the technical specification of the device, MHL is not supported by your T819 tablet."
Surely this would only require a simple software update to re-enable MHL on the latest version S2 tabs ?

Scuba Dooba said:
Sumsung Support Answer:
"Upon checking on the technical specification of the device, MHL is not supported by your T819 tablet."
Surely this would only require a simple software update to re-enable MHL on the latest version S2 tabs ?
Click to expand...
Click to collapse
Contact Samsung Support and try to extract more detail from them. Ask them what is the root cause, and is there any possibility of a future fix or work-around.
I didn't say this in my above post, however I was on Samsung Chat Support for about half an hour just flushing out the above couple of lines I posted.
1st level support are junior staff, and their job is to shield senior staff from the customer.
I was initially given superficial answers and had to keep probing with cross-checking questions, challenging their logic, and requesting they escalate to senior technicians to finally flush out the above answer in my post.
I also requested that they document this technical information in their manual and on their website, but I am not holding my breath.
...... Para Dox

Does anyone know of the otterbox defender case or any case will fit the mhl adapter with the case on..?

Oneplus 7 Pro USB 3.0 or 3.1 cable ?

Hi,
anyone got a working 3.0 or 3.1 cable on an SS USB 3 port ?
I tried different Cables, even the Anker 3.0, but it only shows "charging", the USB 2.0 Port everything is fine....
Should i buy the Anker USB 3.1 Gen2 cable then ? any advice? Anyone found a cable that works on 3.0 speed in data transfer?
Cheers,
Saint.

I'd be curious to know this as well.

USB 3.0 doesnt exist
There is only USB 3.1 Gen 1 and USB 3.1 Gen 2
The OnePlus 7 Pro has USB 3.1 Gen 1

matze19999 said:
USB 3.0 doesnt exist
There is only USB 3.1 Gen 1 and USB 3.1 Gen 2
The OnePlus 7 Pro has USB 3.1 Gen 1
Click to expand...
Click to collapse
It does exist, it's just not an phone-connection.

Prevelation said:
It does exist, it's just not an phone-connection.
Click to expand...
Click to collapse
No, 3.0 doesn't exist.
Wikipedia:
USB

?

Prevelation said:
?
Click to expand...
Click to collapse
please only post english content in XDA...

Prevelation said:
It does exist, it's just not an phone-connection.
Click to expand...
Click to collapse
USB 3.0 was renamed to "USB 3.1 Gen 1" and later "USB 3.2 Gen 1" so no, it technically doesn't exist anymore.
https://tidbits.com/2019/03/04/usb-3-2s-naming-convention-is-a-hot-mess-usb4-announced/

saintxseiya said:
Hi,
anyone got a working 3.0 or 3.1 cable on an SS USB 3 port ?
I tried different Cables, even the Anker 3.0, but it only shows "charging", the USB 2.0 Port everything is fine....
Should i buy the Anker USB 3.1 Gen2 cable then ? any advice? Anyone found a cable that works on 3.0 speed in data transfer?
Cheers,
Saint.
Click to expand...
Click to collapse
I guess with all these discussion about the existance, or not, of the 3.0, your question still inst't answered

refedit said:
I guess with all these discussion about the existance, or not, of the 3.0, your question still inst't answered
Click to expand...
Click to collapse
I was thinking the exact same thing [emoji16]. Nevertheless, I'd like to know the answer to OPs question.
Sent from my GM1915 using Tapatalk

Old post, but I'm confirming that the Anker Powerline II cable works.

SpasilliumNexus said:
Old post, but I'm confirming that the Anker Powerline II cable works.
Click to expand...
Click to collapse
Can you confirm it does work with USB 3.x speed?

Cable Matters 3.1 gen 1 cable works. Appears to be quite a bit faster at transfers than the cable that came with the phone. No effect on tether speeds.

psiLion said:
Can you confirm it does work with USB 3.x speed?
Click to expand...
Click to collapse
Used Dummy File Creator to create a 4GB dummy file, and got speed results using ADB.
First completed push was with the Powerline II cable.
Second completed push was with the original OnePlus Warp cable.
Both using a USB 3.0 port on my PC.

And that is USB 3.1 Gen 1 formerly known as "USB 3.0"? 40 MB/s?! What a disappointment.

SpasilliumNexus said:
Used Dummy File Creator to create a 4GB dummy file, and got speed results using ADB.
First completed push was with the Powerline II cable.
Second completed push was with the original OnePlus Warp cable.
Both using a USB 3.0 port on my PC.
Click to expand...
Click to collapse
This actually proves it does NOT work. USB 3.1 GEN1 does 625MB/sec, USB2 does 40MB/sec!

Huigie said:
This actually proves it does NOT work. USB 3.1 GEN1 does 625MB/sec, USB2 does 40MB/sec!
Click to expand...
Click to collapse
But that might be due to the memory controller, or something else, right?

The phone is fast enough using proper cable/storage :good:

Pfeffernuss said:
The phone is fast enough using proper cable/storage :good:
Click to expand...
Click to collapse
Do I read this correctly? This also is over USB?

pegnose said:
Do I read this correctly? This also is over USB?
Click to expand...
Click to collapse
Yup. Phone --> usb cable --> external Samsung SSD drive :good:

Accessories OnePlus 9 Pro Splitter (Audio and Charging adapter)

Hello,
I have been looking for a splitter adapter for my OP 9 Pro. So far out of 3 different adapters i have bought, none of them worked. Even when i turned OTA Storage ON. Does anybody know any that works with OP 9 Pro so i can charge and use headphones at once please?

I'll need to test the one I used on my 7 Pro. I bought a streaming adapter for my BMW that uses the MOST bus so I tossed the splitters on a drawer.

tech_head said:
I'll need to test the one I used on my 7 Pro. I bought a streaming adapter for my BMW that uses the MOST bus so I tossed the splitters on a drawer.
Click to expand...
Click to collapse
Cool. Try and let me know please.

Ninxha said:
Hello,
I have been looking for a splitter adapter for my OP 9 Pro. So far out of 3 different adapters i have bought, none of them worked. Even when i turned OTA Storage ON. Does anybody know any that works with OP 9 Pro so i can charge and use headphones at once please?
Click to expand...
Click to collapse
Just letting you know, I had the same issue but they appear to work properly on custom roms such as lineageos and crdroid

dkcats3 said:
Just letting you know, I had the same issue but they appear to work properly on custom roms such as lineageos and crdroid
Click to expand...
Click to collapse
So apparently its a OOS thingy... meh its okay. thank you