Develop Bugs

[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - PURE KITKAT) WORKING on CANVAS 4

[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - PURE KITKAT) WORKING on CANVAS 4
Unofficial Cyanogenmod 11 For Micromax Canvas 4 A210
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
This ROM is Built for Wiko Stairway Which is Clone of Micromax A210 by chrmhoffmann. I will help you to enjoy this on our phone.
Check Out the Original Thread and Press Thanks for His Unbelievable work HERE
Instructions.
1.First download CWM RECOVERY FOR THIS ROM
2.using mobile uncle tools app from play store flash it onto your phone
3.after the successful flash of recovery it is time to download CM11 ROM
4.once downloaded , go to your PC and extract the ROM using winrar
5.After the extraction
go into META INF > COM >GOOGLE >updater script
and delete that updater script
6.paste the updater script in the same folder provided below in next section and
7. select all folders(CTRL + A) in the main directory where meta inf and system and all are ..
and then right click and add them to archive using WINRAR
and select zip as for archive type
8.after zipping is done just place the ROM in your sd card
and flash it
as
in recovery mode
select wipe data /factory reset
select mounts and storage
format system
go back and in advanced and select wipe dalvik cache
and then
install zip via sd card
and reboot
and ENJOY!
Downloads
1.Unofficial Cyanogenmod 11 Version 0.17
2.CWM Recovery which Needs to be Used.
4.Updater Script which Needs to Flash
5.Gapps​
THIS THREAD IS NOW BEEN ABANDONED AND IS NO LONGER IN DEVELOPMENT BUT THE WORK MAY BE USED FOR FURTHER DEVELOPMENT
NO LONGER TAKEN CARE OF AS I HAVE A NEW DEVICE NOW
XDA:DevDB Information
[ROM][UNOFFICIAL][WIP]Cyanogenmod 11 (4.4.4 - ) WORKING on CANVAS 4 ABANDONED, ROM for the Micromax Canvas 4 A210
Contributors
yogesh.kalyana, chrmhoffmann
Source Code: http://forum.xda-developers.com/showthread.php?t=2676086
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CYANOGENMOD
Version Information
Status: Abandoned
Current Beta Version: 0.16
Beta Release Date: 2014-09-18
Created 2014-09-18
Last Updated 2015-09-22

Reserved
Credits.
1. @chrmhoffmann For ROM
2. @NeroD
3. @HACKLEAKS (Rahil Jain)
4. @007jigar

Reserved
Bugs Known.
2nd sim card 3G switch
- Dual SIM is a WIP, not has some bugs (data connection instability, etc.)
- camera for "movies" does not work
- (hw) video en/decoding not enabled
-
- FM radio not available
- A-GPS does not work, GPS works though but slowish
Changelog CM11 0.19:
- sync with CM
- enable CWM to install from cmupdater
Changelog CM11 0.18
- sync with CM
- remove MTK audio policy and use default
- increase BT a2dp MTU (does it help?)
Changelog CM11 0.17
- sync with CM
- first attempt to make BT work: a2dp, car and file transfer seem to work
FAQ
This ROM is Still in Beta Stage so Install it at on your OWN RISK. If you find any Bugs other than above, Dont cry instead Report them so the dev can look at them.
1. To Enable MultiSim
Code:
su
setprop persist.radio.multisim.config dsds
2. To Disable MultiSim
Code:
su
setprop persist.radio.multisim.config none

RESERVED
Here I will Share Some awesome MODS or APPS or THEMES for this ROM in the Feature.
Hit Thanks if I helped.
[MOD][CM11]Real Xperia Z2 Lockscreen for Cyanogenmod 11 by NERO D
http://forum.xda-developers.com/can...-xperia-z2-lockscreen-cyanogenmod-11-t2884690
a lot of thanks to nero d

CM 4 ????
is this 4.4.2 or 4,4,4
and CM4 ........... ????????? really

satsmagic said:
is this 4.4.2 or 4,4,4
and CM4 ........... ????????? really
Click to expand...
Click to collapse
don't you see on top it's highlighted on the top ! 4.4.2

Thank You
Thank You, Yogesh...
I was trying to locate the recovery.img for the previous versions.
Regards and Wishes
Kannan

yogesh.kalyana said:
don't you see on top it's highlighted on the top ! 4.4.2
Click to expand...
Click to collapse
the post title says 4.4.4
also post title says CM11 and OP says CM4

yup sorry !
satsmagic said:
the post title says 4.4.4
also post title says CM11 and OP says CM4
Click to expand...
Click to collapse
my bad mistake , edited now!
thanks mate

yogesh.kalyana said:
my bad mistake , edited now!
thanks mate
Click to expand...
Click to collapse
you are welcome buddy, thanks for all the testing you do for the gr88 developers here

Good this was needed as people didnt know to use stairway build on A210.
Corrections needed 1.Bro its 4.4.4 not 4.4.2.
2.Rename thread to same thread as wiko stairway just change wiko stairway to Micromax A210. And highlight the Instructions.
3.Latest ROM is 0.16. Link- https://goo.im/devs/chrmhoffmann/wiko/cm-11_stairway-ota-UNOFFICIAL-FULLOFBUGS-0.16.zip/
4.Latest Recovery is 0.15 link http://goo.im/devs/chrmhoffmann/wiko//cwm-recovery-wiko-stairway-kk-0.5.img
5.Specify the bugs and make a proper Bug List.
6.Add the Multisim enable/disable commands from original thread.
7. Add Credits Section. Add Mentions of chrmhoffmann and other 3 guys u written.

Status 7
Yogesh,
I get error Status-7
Regards
kannan

satsmagic said:
you are welcome buddy, thanks for all the testing you do for the gr88 developers here
Click to expand...
Click to collapse
Thank you, the goo site does not always work, you can not download the recovery, can someone please put it somewhere else?
thank you

Use firfox!
chuppito said:
Thank you, the goo site does not always work, you can not download the recovery, can someone please put it somewhere else?
thank you
Click to expand...
Click to collapse
it is working for me on all time
just use firefox on PC!

OK!
NeroD said:
Good this was needed as people didnt know to use stairway build on A210.
Corrections needed 1.Bro its 4.4.4 not 4.4.2.
2.Rename thread to same thread as wiko stairway just change wiko stairway to Micromax A210. And highlight the Instructions.
3.Latest ROM is 0.16. Link- https://goo.im/devs/chrmhoffmann/wiko/cm-11_stairway-ota-UNOFFICIAL-FULLOFBUGS-0.16.zip/
4.Latest Recovery is 0.15 link http://goo.im/devs/chrmhoffmann/wiko//cwm-recovery-wiko-stairway-kk-0.5.img
5.Specify the bugs and make a proper Bug List.
6.Add the Multisim enable/disable commands from original thread.
7. Add Credits Section. Add Mentions of chrmhoffmann and other 3 guys u written.
Click to expand...
Click to collapse
1.4.4.4 edited
2.thread name : the original devis okay with that
3. and 4 th links updated
5.bugs : need your help for that to specify all the bugs
6.multisim posted
7.CREDITS GIVEN

yogesh.kalyana said:
it is working for me on all time
just use firefox on PC!
Click to expand...
Click to collapse
I have finally come to the download ... Thanks I test

Can you give screenshots..

Prometheus1408 said:
Can you give screenshots..
Click to expand...
Click to collapse
Screenshots Pls!!
Sent from my D6503

Ashok sha said:
Screenshots Pls!!
Sent from my D6503
Click to expand...
Click to collapse
Why dont you need screenshots for Cyanogenmod 11 they are same as any other cm11 rom. Google for it.

Finally the first kitkat 4.4.4 rom that instal without problems. For now, the only two bug I mentioned are those ...
thank you

[ROM][5.1.1]Nameless Rom lollipop[Testing-2][A210][23-07-15][Unofficial]

Quote:
What is NamelessROM ?
Simple - NamelessROM is opportunity.
An opportunity to have a voice to the development team of the after-market firmware that you run on your device.
The main goal of NamelessROM is to provide quality development for android devices, phones and tablets alike.
NamelessROM developers are available nearly 24/7 and respond to bug reports and feature requests almost instantly.
This availability will allow you, the end-user, to have direct input into exactly what features and functions are included on the firmware that YOU run.
NamelessROM maintains features and functions of several well-known open-source, AOSP-based ROMs, as well as many features of our own.
Visit our website for more detailed information.
NamelessROM = endless possibilities. Unless you have an iPhone, then you're out of luck.
Click to expand...
Click to collapse
This is Nameless Lollipop rom for A210. This is in testing stage. Please do try it out. I am not responsible for any damage caused by this rom. Please don't complain about any bootloops or bricked devices and blame me. Those curious enough can try and please feel free to comment. cheers
P.S. The rom is probabaly not rooted. I don't want to include root package until this is atleast in beta stage. Those who want root can try flashing SuperSU at your own risk.
DISCLAIMER
Quote:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
Download Links
Rom: 23/07/2015
Gapps: PA Gapps
Installation Instructions
Download zip to your sdcard
Make sure you're using a Kitkat Compatible Recovery
Boot into Recovery
Take a backup if required
Wipe all your data
Flash zip from sdcard
(Optional)Flash Google Apps.zip from sdcard
Reboot
PREVIOUS DOWNLOADS
19/07/2015 (Not Booting)
XDA:DevDB Information
Nameless Rom for Canvas 4 A210, ROM for the Micromax Canvas 4 A210
CREDITS
chrmhoffmann for RIL
fire855 for his work.
Contributors
sai24
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Kitkat compatible recovery
Based On: CM
Version Information
Status: Testing
Created 2015-07-19
Last Updated 2015-07-23

Question [?]
Hi !
I'm an MT6589 user with a phone with the exact specs than yours .
I've got 4.4.2 OFFICIAL ( Released by my brand, 0 Bugs ) and Jelly Bean ( Also official ) .
Also, i've got KK & JB Kernel sources .
¿ How Can I Port This ROM ?
Thanks !
Salutations from Spain !

Wowwwwwww!!! A Complete Lollipop Rom for our Canvas4. Never ever imagined of this. Thanks a lot Bro. Could you please mention the bugs in the rom, and if possible some screenshots. That would be awesome. We will definitely try and help this rom out. :good::good::good::good::good:

First thank you for you hard work. I want to test your rom but i can't because i am on wiko stairway (A210 clone's) and so the installation aborte. :crying:

Installation was successful in recovery, But its not rebooting. Got stuck at boot image, waited for 15 min but no result.

Anyone please upload kitkat recovery

ats0709 said:
Anyone please upload kitkat recovery
Click to expand...
Click to collapse
Head over to this link bro,
http://forum.xda-developers.com/canvas-4/development/recovery-clockworkmod-6-0-4-8-t2739053
Flash the rom and please report if its rebooting and working.

Hi Guys,
we have been checking the stairway roms mostly, for kitkat...
how to get the updater script working again for a210...
can u change the updater-script accordingly so that it works with the stairway roms.
baffled!!!!
Regards

Porting THis ROM
Hi another time !
I'm an MT6589 user with a phone with the exact specs than yours .
I've got 4.4.2 OFFICIAL ( Released by my brand, 0 Bugs ) and Jelly Bean ( Also official ) .
Also, i've got KK & JB Kernel sources .
¿ How Can I Port This ROM ?
In this GitHub ( Brand GitHub's ) is located the Kit Kat and the Jelly Bean kernel source :
https://github.com/bq/aquaris-5HD
And there are the complete phone specifications :
http://www.devicespecifications.com/en/model/445730ea
Do i need to mod anything on the kernel ?
If it helps, I have knowledge of C ++ and a little bit of MakeFile structure.
Also, I'm on a Linux OS ( Ubuntu 14.04.2 ) and i know a lot of terminal usages to build kernels & roms .
Thanks !
Salutations from Spain !

Well, did anyone tried the rom on canvas4, is it working.

Can the updater script changed in a way that it works with canvas4 with stairway roms installed before??
Can u post an updater script with the assertion removed...
i couldnt read with line breaks in the notepad
Please help

Holy cow, great work! I can't wait to test this one. I'll report back.

flashed this rom but not rebooting
flashed this rom but not rebooting

maazkazi91 said:
flashed this rom but not rebooting
Click to expand...
Click to collapse
Does it go to the boot animation screen or does a bootloop occur? Please try wiping data and factory reset after you flash the rom and try rebooting. Thanks for all those who tried the rom. Cheers!!

it reboots continiously
it boots continuously after flashing... but i haven't wiped cache after flashing the rom... will try that method and let u know

It does not go to the Boot Animation. Just keeps on rebooting to the boot logo. Did what you asked, no avail.
---------- Post added at 10:37 AM ---------- Previous post was at 10:29 AM ----------
@sai24 can you list the features that work and those that doesn't work? Thanks bro.

@sai24, did what you said bro. Did the data/factory reset and cleared cache, but still no good. Its continuously going back to the boot image. Please help us. Very excited to try this one. Thanks a lot bro.

kannanrs said:
Can the updater script changed in a way that it works with canvas4 with stairway roms installed before??
Can u post an updater script with the assertion removed...
i couldnt read with line breaks in the notepad
Please help
Click to expand...
Click to collapse
Download and use Notepad++

I've tried a kk rom but it failed with firmware and cost my touchscreen... so be careful guizz with this new rom...

amarnath_jamale said:
I've tried a kk rom but it failed with firmware and cost my touchscreen... so be careful guizz with this new rom...
Click to expand...
Click to collapse
I think there is no such kk rom in this entire thread. Anywaz, lets hope this rom works perfect as soon as possible with all the efforts of developers and members.

[ROM][5.1.1_r26][UNOFFICIAL]Temasek 5.1.1[BETA]

Introduction
Temasek is based on Cyanogen Mod rom ,and added more feature than Cyanogen Mod
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, or dead SD cards,
* nuclear war, penguin invasions or that you are getting fired because the alarm app failed.
* before flashing it! YOU are choosing to make these modifications, and
* If you point your finger at me for messing up your device, I will laugh at you. Hard
*/
Samsung Galaxy Fame device-specific source code :
Devicehttps://github.com/wulsic/android_device_samsung_nevisp
Kernel: Vendor: [/COLOR][URL="https://github.com/wulsic/android_vendor_samsung_nevisp"]https://github.com/wulsic/android_vendor_samsung_nevisp
Patches :
Most patches by pawitp: https://gist.github.com/pawitp/88a1d4514a0734c866c7(replace each time it says CAPRI with RHEA)
Icu4c compat for working rhea EGL driver: https://gist.github.com/Flex1911/47a9515fc482d5551a85
audioflinger patch for support old API https://gist.github.com/Flex1911/79969e4bfe06cf91b647, https://gist.github.com/Alonso1398/9eede1c631c2a88ec2fc and https://gist.github.com/Alonso1398/5d9dbb0f0eb5cc9cf25a
Not Working:
Same like CM12.1
Working:
everything is working except at Not Working list
Installation instructions
first,u need CWMR 6.0.4.9(by corsicanu or wuilsic) / TWRP 2.8.7.0
Download the zip
WIPE DATA/FACTORY RESET
Format/System
flash the rom zip from recovery
Flash gapps package or light gapps.
Reboot
Connect your phone to your pc and use adb to logcat and report it here.
Downloads
Please don't mirror to any site ,cuz everyone must see this thread and read the discussion
Please give a proper credit and thread link if you are publishing any article, video or anything related to this ROM
don't use adfly or shorten link to made money from our hard works
ROM
Android File Host
Gapps
you can use Open Gapps or any gapps ,choose PICO <because it's just include Play Store and Google Framework
How do I logcat?
See this thread how to logcat it's very easy, I suggest to be also newb friendly to use the logcat apps.
http://forum.xda-developers.com/showthread.php?t=1726238
How do I enable Dual SIM?
To enable or disable, run the following command from adb or terminal emulator and then reboot. SIM Settings can then be found in Settings -> Multi Sim Settings
Option 2 which is the fastest one is to check out this app made by @xenon92 it also has a nice UI, I hope it works on the fame else I will remove the link again:
https://github.com/xenon92/multisim-toggle/releases
Enable:
Code:
su
setprop persist.radio.multisim.config dsds
Disable:
Code:
su
setprop persist.radio.multisim.config none
Note that Dual SIM mode currently has the following limitations:
Both SIMs are always enabled (no way to disable one SIM)
"Receive incoming call while data is enabled" is always enabled
The QuickSettings tile will display the status for the currently selected SIM for data
There is no arrow activity indicator in the status bar.
Changing 2G/3G network mode using the QuickSettings toggle is not supported, only do it from Settings.
Changing 2G/3G mode in Settings may show too many options if the language used is not English. If more than 3 options is shown, only use the 3 top options (which will be WCDMA only/GSM only/WCDMA preferred regardless of the actual label shown).
3G may not work properly if Dual SIM mode is enabled with only 1 SIM inserted
Cannot set different ringtone for each SIM
Baseband version not displayed in Settings
Credits:
Google for Android before Cyanogenmod will slice them off.
The Android community for their contributions
Cyanogenmod for their Branch
@wulsic for his works! for this device to make a good device tree based on
@dhinesh77 for his Corsica source which I use as base.
@pawitp for Patches
@xenon92 for collection and patch apply script
karthick mostwanted for some kernel tweaks/other stuff.
@corsicanu
Ramsudharsan
@happyhere :*
@Alonso1398 for the patches
@flex1911 for the patches
@citrusb for fixing build kernel problem
@temasek who make temasek rom
@arter97 of course,he help temasek to made the best one
And all the betatesters and the fame community peope which are just too many to mention.
XDA:DevDB Information
Temasek 5.1.1, ROM for the Samsung Galaxy Fame
Contributors
faizauthar12, Wulsic, Karthick Mostwanted
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
ROM Firmware Required: latest firmware
Based On: Temasek
Version Information
Status: Beta
Current Beta Version: 20151207
Beta Release Date: 2015-12-07
Created 2015-12-07
Last Updated 2015-12-07

reserved

I'm trying to flash now, but it seems to be going much slower than usual (tried on cwm and twrp latest versions). Stuck at "detected filesystem ext4 for dev/block/mmcblk0p9". Any solutions? (same issue with both recoveries)
Update: It takes really really long, but suddenly it boots Its really smooth, thank you @faizauthar12

It has more applications is nice and soft
it does not work
the browser goes black
The camera records but the videos come in green
Sound Recorder does not work
the gapps take a long the phone
It's a great job thank you very much for your effort

U know ,the size of temasek ,500 mb : v ,so yeah it will take longer than usual

Please do something for dual sim

bhkparmar said:
Please do something for dual sim
Click to expand...
Click to collapse
give me ur RILD from stock
system/bin

faizauthar12 said:
give me ur RILD from stock
system/bin
Click to expand...
Click to collapse
I have already uploaded System/Bin from my stock rom in Cm12.1 threads, link: http://forum.xda-developers.com/showpost.php?p=63851534&postcount=123

deepakpop said:
I have already uploaded System/Bin from my stock rom in Cm12.1 threads, link: http://forum.xda-developers.com/showpost.php?p=63851534&postcount=123
Click to expand...
Click to collapse
lol xD
forget that

SIM is not working what to do???

torgashkin said:
SIM is not working what to do???
Click to expand...
Click to collapse
Not sure what model you have, but on my phone (s6810), I simply changed to single sim and voila, it works

there is a possibility of
Slim ROM 5.1.1
CARBON ROM
as has the Pocket Neo?

can't flash this rom
I try to flash this on my fame with cwmr 6.0.4.9, but while i flash this rom, i always got "error at extsdcard/rom.zip
instalation aborted
(Status 7)"
Can you help me.
Sorry for my bad english

YDroid521 said:
I try to flash this on my fame with cwmr 6.0.4.9, but while i flash this rom, i always got "error at extsdcard/rom.zip
instalation aborted
(Status 7)"
Can you help me.
Sorry for my bad english
Click to expand...
Click to collapse
Already tried CWMR 6.0.5.1 / TWRP?
Sent from my ferrari using XDA Labs

faizauthar12 said:
Already tried CWMR 6.0.5.1 / TWRP?
Sent from my ferrari using XDA Labs
Click to expand...
Click to collapse
I also use TWRP 2.8.7.0 but after I flash this rom and reboot, my phone do not want to boot, then i open twrp again and flash another rom Then reboot, its fine.
Can you tell me whats wrong with this, because i really want use this rom or tell me correct way flash with twrp.

YDroid521 said:
I also use TWRP 2.8.7.0 but after I flash this rom and reboot, my phone do not want to boot, then i open twrp again and flash another rom Then reboot, its fine.
Can you tell me whats wrong with this, because i really want use this rom or tell me correct way flash with twrp.
Click to expand...
Click to collapse
how long u wait it ??
it takes more than 30 minutes

faizauthar12 said:
how long u wait it ??
it takes more than 30 minutes
Click to expand...
Click to collapse
I wait 30 minutes or more. Can you tell me step by step flash this rom with twrp because this is first im using twrp

YDroid521 said:
I wait 30 minutes or more. Can you tell me step by step flash this rom with twrp because this is first im using twrp
Click to expand...
Click to collapse
i think
u already read the first post bro
wipe>advance wipe

ROM download page says :
access denied
looks like you don't have permission to access this folder. Make sure you are signed in to an account that has permission, or check with the developer to request access

waheka said:
ROM download page says :
access denied
looks like you don't have permission to access this folder. Make sure you are signed in to an account that has permission, or check with the developer to request access
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=65918888&postcount=345

[ABANDONED][ROM][BUILD 1 - 2016/01/06] CyanogenMod 12.1 - Bule Repack

Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1.x (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
NOTE: This is a cooked ROM based on Compiled from Source by Bule.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------​
This project no longer updated because I sold this device. Thanks for following my projects :good:​
-----------------------------------------------------------------------------------------------------------------​Issues?
Experience issues? Please provide the following info:
If the device was hard reboot, please provide the file "/proc/last_kmsg".
If the device was soft reboot or is "bootlooping", please run a logcat and provide the full output.
Please use Pastebin when possible.
Click to expand...
Click to collapse
Features
It's a standard CyanogenMod 12.1 Bule build 20160102 porting plus this:
Deleted China app
Default system theme
Added Xperia keybord (deleted china keyboard)
Europe timezone
Fixed host for normal contacts synchronization
en local
Root explorer in data/app (can delete from home app)
.
Click to expand...
Click to collapse
Installation instructions
Download the ROM into internal/external SD.
Download GoogleApps into internal/external SD.
Create a backup with TWRP if need.
Factory Reset via TWRP.
Flash it via TWRP.
Flash GoogleApps via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM installation.
Click to expand...
Click to collapse
Update instructions
Download the ROM into internal/external SD.
Download GoogleApps into internal/external SD.
Create a backup with TWRP for security.
Flash it via TWRP.
Flash GoogleApps via TWRP.
If you receive the error in the TWRP "mount: failed to mount /dev/block/platform/mtk-msdc.0/..." flash the rom again.
Wipe dalvik-cache and cache via TWRP.
Reboot and waiting to complete the ROM update.
Click to expand...
Click to collapse
Xposed installation
For Xposed installation follow this thread and install the arm64-sdk22 version.
Click to expand...
Click to collapse
Know bugs
Notifications LED: working fine with some colors, red | green | cyano | pink | orange | white but the cm color selection go crazy sometimes, we working to fix this, but the notifications now working fine.
Engineering mode not working (in this moment into no one CM working).
FM Radio module not working.
Sim 2 not working (need testing).
Click to expand...
Click to collapse
Change log
Code:
Build 1 - 2016/01/06
[new] First release.
Click to expand...
Click to collapse
Downloads
External Download (sorry but I can't upload every build): The author abandoned for a moment for instability issue, when this rom come back again, I repost here too.
Click to expand...
Click to collapse
Important notes
This ROM is based on Bule Version with plus features get from other CyanogenMod available for our device. The most important in this ROM is stability with velocity. If you wanna try this ROM remember this is a testing ROM and all times we working for give the best experience with this ROM and device. If you have a problem you can write here or into the official site (I suggest to talking here because into XDA we have the best developers in the android ecosystem).
Click to expand...
Click to collapse
XDA:DevDB Information
[ABANDONED][ROM][BUILD 1 - 2016/01/06] CyanogenMod 12.1 - Bule Repack, ROM for the Redmi Note 2
Contributors
Namaless, vova_vafin, bule
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Abandoned
Created 2016-01-06
Last Updated 2016-02-01

Reserved

You should tell us...WHY THIS ROM, WHY THIS THREAT?
There is the Daniel101 mod already which seems to have all this here PLUS other cool stuff.
Even if one doesn´t need the extra stuff....just ignore it. So no need for this ROM/THREAT here.
Otherwise please tell us what makes this here so special?

DJ-Tumor said:
You should tell us...WHY THIS ROM, WHY THIS THREAT?
There is the Daniel101 mod already which seems to have all this here PLUS other cool stuff.
Even if one doesn´t need the extra stuff....just ignore it. So no need for this ROM/THREAT here.
Otherwise please tell us what makes this here so special?
Click to expand...
Click to collapse
First for all thanks to post your idea with rude method.
Next you know some ppl can use some roms?
Third you can ignore the rom/thread and use what you want, example I used Miui stable but I testing all roms when come out for funny and for help other ppl.
What you think resolve with your post? Nothing...
Sorry if you think I'm rude, but I reply with the same method you post here...

The owner of the rom have removed from public access, I talking with him if want repost or I request deleting to this thread. Sorry for inconvenience.

[ROM][PORT][TEST]CM13 Xperia M5

Xperia M5 First CyanogenMod Rom
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
this rom is beta port and need tester
Working:
You tell me
Bugs:
You tell me
ROM link
Beta 1 [COLOR="Red"]NO KERNEL SOURCE =[/COLOR]
Beta 2 [COLOR="Red"]NO ES BUENO :([/COLOR]
Installation Instructions:
-unlock bootloder
-root and twrp install
-zip flash via twrp
-wipe data
-reboot
rom base customized tr marsmallow
this rom is beta and need tester.ıf you test and tell me work, TRXteam port new roms on xperia m5.
thanks @ByBlaCk @krkshalill @TheShadow35
Contributors
TRXteam,ByBlaCk,krkshalill,TheShadow35
ROM OS Version: Marsmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP+Any Rooted Stock Rom
Based On: CyanogenMod
Version Information
Status: Beta

How nice is that. Finally some custom roms are avaiable for m5.

jonathangrag said:
How nice is that. Finally some custom roms are avaiable for m5.
Click to expand...
Click to collapse
thanks.
my team port xperia m5 custom roms but need tester and tell me bugs.ıf some people test and report bug ı port new roms(eg.flyme cm14) xperia m5 and ı fix bugs.

Thread moved to Android Development. I would like to see kernel source very soon.
thx

Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.

グリッチ said:
Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.
Click to expand...
Click to collapse
this rom beta and some devices was boot loop.My team cant fix that and not update.If you like cm13 and you port it like devices(e.g elephone wowney lite,infinix zero 3,redmi note 2,redmi note 3(Mediatek),or any mt67xx eg.jıayu s3,jıayu s3 plus,....)

グリッチ said:
Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.
Click to expand...
Click to collapse
https://mega.nz/#!dhNC2Qha!HeCEBti25M1ecmxUFhsZ_AZE_dX-amjMJZL-OZea-sc
if you test its new rom wait 30 minutes black screen after flashed and reboot,ıf work you lucky guy,but not work you unlucky guy,My team Closed this thread because some devices boot loop or not working but some devices working,ı dont known this.If fix , share it.
.Have a good day.
thread closed.

TRXteam said:
https://mega.nz/#!dhNC2Qha!HeCEBti25M1ecmxUFhsZ_AZE_dX-amjMJZL-OZea-sc
if you test its new rom wait 30 minutes black screen after flashed and reboot,ıf work you lucky guy,but not work you unlucky guy,My team Closed this thread because some devices boot loop or not working but some devices working,ı dont known this.If fix , share it.
.Have a good day.
thread closed.
Click to expand...
Click to collapse
Ok, I downloaded it, but I just want to make sure before flashing...
Your instructions say flash zip > wipe data.
Should I do that or Wipe data (data only?) > flash zip?

TRXteam said:
Xperia M5 First CyanogenMod Rom
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
this rom is beta port and need tester
Working:
You tell me
Bugs:
You tell me
ROM link
https://mega.nz/#!Fg1AQCyA!SlGKtLdQmLJbFw8JHeulDa4b4KznRRkkYtusK1Ea0K0
Installation Instructions:
-unlock bootloder
-root and twrp install
-zip flash via twrp
-wipe data
-reboot
rom base customized tr marsmallow
this rom is beta and need tester.ıf you test and tell me work, TRXteam port new roms on xperia m5.
thanks @[email protected]@TheShadow35
Contributors
TRXteam,ByBlaCk,krkshalill,TheShadow35
ROM OS Version: Marsmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP+Any Rooted Stock Rom
Based On: CyanogenMod
Version Information
Status: Beta
Click to expand...
Click to collapse
will this rom pass safetynet api test?

Hello, this ROM is compatible with Sony Xperia M5 E5603, E5606 and E5653? It's correct?
The version dualSIM "hollyds" is compatible? Thank you very much for the support!

ataraxist said:
will this rom pass safetynet api test?
Click to expand...
Click to collapse
ı dont known,you test and look it.:good:

pickmod said:
Hello, this ROM is compatible with Sony Xperia M5 E5603, E5606 and E5653? It's correct?
The version dualSIM "hollyds" is compatible? Thank you very much for the support!
Click to expand...
Click to collapse
not support hollyds,this rom compatible with hollyss(eg.E5603)

グリッチ said:
Ok, I downloaded it, but I just want to make sure before flashing...
Your instructions say flash zip > wipe data.
Should I do that or Wipe data (data only?) > flash zip?
Click to expand...
Click to collapse
グリッチ said:
Since it takes forever for anyone to do anything in these threads I went ahead and tested.
I was on Customized AU MM, TWRP&Rooted.
Wiped data, and flashed zip.
Boot loop was the result.
Click to expand...
Click to collapse
rom update beta2 and need tester.

TRXteam said:
rom update beta2 and need tester.
Click to expand...
Click to collapse
rom not working: after install file via twrp and reboot device i get the bootloop. I use TWRP 3.0.2.2. After try wipe cache partition i get error message "can't umount /cache: device busy". Tested b1 and b2 too.

spark1991z said:
rom not working: after install file via twrp and reboot device i get the bootloop. I use TWRP 3.0.2.2. After try wipe cache partition i get error message "can't umount /cache: device busy". Tested b1 and b2 too.
Click to expand...
Click to collapse
thanks your reply,My team goes to holiday and ı am alone but ı work it.

I'm downloaded the cm13 sources for build cm13 with kernel 3.10.[61/72] and binaries based on redmi note 2. If you want, i can help for you. Send me your usable binaries (/vendor and /device/ folders)

spark1991z said:
I'm downloaded the cm13 sources for build cm13 with kernel 3.10.[61/72] and binaries based on redmi note 2. If you want, i can help for you. Send me your usable binaries (/vendor and /device/ folders)
Click to expand...
Click to collapse
okay thanks your help.:good:

spark1991z said:
I'm downloaded the cm13 sources for build cm13 with kernel 3.10.[61/72] and binaries based on redmi note 2. If you want, i can help for you. Send me your usable binaries (/vendor and /device/ folders)
Click to expand...
Click to collapse
I dont understand... Sony opened sources for our device - why are you need sources for other device??!

Thread closed as there is no kernel source available. I have warned the OP a few days ago - without any success apparently
Here's a nice lecture about being a good developer. Rules are made to follow them and I fully expect it from you.
Regards,
Tom