Hi guys,
I checked all the forums and other treaths and did everything what they say but got nothing.
problem is my wave2 8530 cannot recognize by WINDOWS7.
1. Updated all the drivers, kies, USB, etc.
by the way on the bootloader mod(Balckscreen), windows7 still not recognisizing my device...
How can I connect yo wave 2 with USB to use Multiloader. Becouse of these reasons, multiloader cannot search and find PORT...
by the way on the bootloader mod(Balckscreen)
Click to expand...
Click to collapse
You are able to use Wave?
You can see something?
If not...
Your battery is charged? Be sure not empty...
You can access Download Mode?
Best Regards
Battery is charged, I can use the phone, but even the phone is on or not my wave 2 cannot connect to the PC, KİES and anything...
Menu-settings-onnections-usb/kies/etc set everything but notting happened.
I want to flash orginal ROM again
but when I set the device on bootloader mode, windows 7 not recognize....
64 or 32 bit Windows...
Are Driver proper installed?
Check device manager...
Best Regards
Check if phone is charging when connected and also check the usb port,cable
try this one
switch off tk file explorer :
1) open keypad
2) type *#197328640#
3) open "[6] Common" by pressing on 6 on the displayed keypad.
4) open "[3] USB Configuration" by pressing 3.
5) NOW WAIT , and check for the star mark in front of the two options.
If its next to OFF then you dont need to do anything else, just close everything.
If its next to on then press 2 to turn it off.
It will show this after pressing 2 >>---> " [1]TkFilexplorer - ON [] "
Now close everything and you are done !
pls also try very very carefully
if you dont understand completely - you shoudnt do it
go to control panel - hardware and sound - device manager
expand the view of the usb - universal serial bus
make sure that that you have the drivers to your usb devices
delete all the usb from there
disconnect all usb devices
restart your pc and let windows reinstall all your usb components
and then retry to connect your cell
good luck
How To Get Windows 8.1 To Recognise USB Mass Storage On Your Phone
I have had the problem for ages that when I connected my Samsung Galaxy GT-S5360 into my Windows 8.1 PC nothing happened - Windows 8.1 simply refused to recognise the device - not even anything in device manager - nothing - nada
However it would recognise the phone if I set the phone to download mode - but I want to use my phone as mass storage
Well after months of trying I finally found a really stupid solution
Solution
Install the usb drivers for your phone as normal
connect the phone to pc via usb cable (nothing happens other then a few beeps as normal)
now plug in any usb dongle that you have already installed on your pc - like a usb wireless mouse dongle
suddenly windows detects the phone and you can now set your phone to mass storage from the phone status bar
Every time you want to connect your phone in mass storage just plug it in then plug in the other usb dongle after
My Device never getting error like that on my Windows 8.1 Laptop
GSculerlor said:
My Device never getting error like that on my Windows 8.1 Laptop
Click to expand...
Click to collapse
it maybe the brand of laptop too and the chipset of the laptop - there have been lots of problems with usb devices with windows 8.1 and inbuilt bluetooth too although manufacturers quickly released new bluetooth drivers as the windows 8 ones didnt work in windows 8.1
so this is just for those who have problems with their particular laptop
Similar Issue with Samsung Galaxy S
I had a similar problem when I needed to copy some files onto a Galaxy S. In the past, I had to ensure that USB Debugging was off, connect the USB cable and then select Mass Storage on the smartphone. Win 8.1 Explorer did not see the device although it showed up as SAMSUNG_Android in Eject Media and Device Manager had the phone listed under Universal Serial Device. I was able to access the phone on one laptop by selecting Samsung Kies as the connection method (showed up in Explorer under the device type rather than a drive letter) but this did not work on another laptop.
The steps described in "How to connect Android devices to PC with USB Mass Storage Mode" on device-recovery.com worked for me on both Win 8.1 laptops: enable USB Debugging, connect the phone, pull down the status bar, tap on the USB Connected entry and then Mass Storage.
nhoeller said:
I had a similar problem when I needed to copy some files onto a Galaxy S. In the past, I had to ensure that USB Debugging was off, connect the USB cable and then select Mass Storage on the smartphone. Win 8.1 Explorer did not see the device although it showed up as SAMSUNG_Android in Eject Media and Device Manager had the phone listed under Universal Serial Device. I was able to access the phone on one laptop by selecting Samsung Kies as the connection method (showed up in Explorer under the device type rather than a drive letter) but this did not work on another laptop.
The steps described in "How to connect Android devices to PC with USB Mass Storage Mode" on device-recovery.com worked for me on both Win 8.1 laptops: enable USB Debugging, connect the phone, pull down the status bar, tap on the USB Connected entry and then Mass Storage.
Click to expand...
Click to collapse
What you said will not work for this phone because when you plug it into a windows 8.1 laptop the option to select connect to mass storage in status bar is not there - It just shows the phone as charging
The only way iv found on a windows 8.1 laptop with this issue (note it depends on your hardware to weather you have this problem) is to plug the phone into the laptop then plug any other dongle in - the option to then connect to mass storage suddenly appears in the status bar and you can connect as normal
my a2 lite does not connet to my pc, I have installed drivers, put it on usb debug, but my pc does not recognize de phone, I have tried different usb ports and cables with no success, it does charge eventually with some cables, but I don't know if this is hardware problem or there is any setting I am missing, it does not give me any choice of chosing the usb kind of conection
it is a new phone just prepped for everyday use, not hacked or modded in any way
USB OTG is working but only reading, I cannot write in external usb drive with es file explorer, or the includer file aplication, it says unsupported operation
any help?
Set hardware id in the adb_usb.ini file perhaps
cpu004 said:
Set hardware id in the adb_usb.ini file perhaps
Click to expand...
Click to collapse
thank you, but I cannot acces from adb as there is absolutely no conection from my computer, it only starts charging but as if it were just a charger, there is no usb mode options avalaible y my phone, and the pc does not recognize anything conected
I have tried to connect with another computer with the same results, it only gets power, but no data comunication whatsoever
as nobody gives any clue or info about some hidden setting, I must assume this is another case of bad quality control in xiaomi products, I will check with the seller
Did you specifically set file transfer mode via the notification drawer or left it on charge only?
cpu004 said:
Did you specifically set file transfer mode via the notification drawer or left it on charge only?
Click to expand...
Click to collapse
the phone does not detect either that it is connected to a computer, so the notification to select the mode of connection does not even show
I have tried usb otg and I can read fine but I cannot write at all in a pendrive
I have installed also an sd card as internal memory and have storage errors all the time so I have removed it
I have tried also conection in fastboot mode but the computer still does not recognize anything connected
I have uses several cables, usb ports and even 2 different pc with same results
My only guess is that there were some hidden config setting that is messing with the phone, that's the reason I am asking before going to the seller.
Seems like a broken USB pin then
cpu004 said:
Seems like a broken USB pin then
Click to expand...
Click to collapse
an usb pin should not affect internal sd memory, and usb does not work like water pipes, one pin data in one pin data out, they need both data pins for reading also, so as it can read from pendrive the problem is somewhere else, not in the connector.
This could be a hardware problem. Have you tried to connect it to another computer?
I have already tried on 3 diferent computers with same results. The only diference so far is that it actually does not read either the content of a pendrive connected through OTG, the first day it read it, now it only detects but reads nothing.
Also when sd is configured as internal memory, instead of reading internal memory, that seems to be the normal result, I can read only the sd card with android file explorers
I have the same problem.
No connection data with pc/mac, it only charges.
I'm italian and like many other italians, I've also the problem with Sim slot 2 with no connect..
robiox said:
I have the same problem.
No connection data with pc/mac, it only charges.
I'm italian and like many other italians, I've also the problem with Sim slot 2 with no connect..
Click to expand...
Click to collapse
It is good to know I am not the only one.
F**k, this phone starts to look like a piece of garbage I dont connect to USB, I dont use SD not 2nd sim, so I did not experience these issues, but, f**k again..
Have you tried rebooting? Press the power button for 15secs. to power it off. Use another cable, use another PC, make sure the cable is plugged in properly... bla bla bla. Oh, have you tried placing the phone into a dry rice bowl? Haha (sorry, I had to). I'm sure you've tried it all.
So, I have not much to say. Only that I had a similar problem with a Moto G after I flashed a LineageOS ROM. It worked fine before, but with the new ROM, the USB didn't work at all (it could only read OTG). It was stuck in the "charging" mode. No notification nor option to turn it to file transfer. The PC didn't recognise it at all, either.
Solution? Initially, I turned on USB debuging option and the PC saw the phone (on windows device manager, it was there, but not on MyPc). It was some advance. I can't remember if adb detected it.
Final solution? Luckily my phone was rooted and had a custom recovery, so I could easily flash the same ROM from the TWRP recovery and everything works fine now.
You might try using Xiaomi's flash tool to try to flash the orginal ROM again IF the phone is recognised by the tool (try if it can see the phone) http://en.miui.com/download-354.html
And I suggest contacting Xiaomi for a warranty claim if needed, 'cause it looks like a harware problem (a pin the the microUSB port issue). But be ready to answer the questions posted above several times haha.
Good luck!
adriakus said:
Have you tried rebooting? Press the power button for 15secs. to power it off. Use another cable, use another PC, make sure the cable is plugged in properly... bla bla bla. Oh, have you tried placing the phone into a dry rice bowl? Haha (sorry, I had to). I'm sure you've tried it all.
So, I have not much to say. Only that I had a similar problem with a Moto G after I flashed a LineageOS ROM. It worked fine before, but with the new ROM, the USB didn't work at all (it could only read OTG). It was stuck in the "charging" mode. No notification nor option to turn it to file transfer. The PC didn't recognise it at all, either.
Solution? Initially, I turned on USB debuging option and the PC saw the phone (on windows device manager, it was there, but not on MyPc). It was some advance. I can't remember if adb detected it.
Final solution? Luckily my phone was rooted and had a custom recovery, so I could easily flash the same ROM from the TWRP recovery and everything works fine now.
You might try using Xiaomi's flash tool to try to flash the orginal ROM again IF the phone is recognised by the tool (try if it can see the phone) http://en.miui.com/download-354.html
And I suggest contacting Xiaomi for a warranty claim if needed, 'cause it looks like a harware problem (a pin the the microUSB port issue). But be ready to answer the questions posted above several times haha.
Good luck!
Click to expand...
Click to collapse
I have done all your sugestions previously, even reseting phone with a new gmail account so no config setting from other phone could interfere, I have also tried fastboot, but although phones goes to fast boot mode the pc does not recognize connection either
it is not an usb pin issue, tried 6 cables, 4 computers, 10 or more usb 2 an 3 ports, I am negotianting in aliexpress a refund, we'll see
If I go into recovery mode with power vol+ a broken android appears.
elsita said:
I have done all your sugestions previously, even reseting phone with a new gmail account so no config setting from other phone could interfere, I have also tried fastboot, but although phones goes to fast boot mode the pc does not recognize connection either
it is not an usb pin issue, tried 6 cables, 4 computers, 10 or more usb 2 an 3 ports, I am negotianting in aliexpress a refund, we'll see
If I go into recovery mode with power vol+ a broken android appears.
Click to expand...
Click to collapse
I don't know if you already did this, but try using a PC with Linux (you can use Ubuntu without installing it on the PC, then install the fastboot package).
Hi,
I had no problem with fastboot and adb with Mac!
Phone recognized by the machine and do transfer boot.img for magisk...
Now I Win!
I can see the internal memory with Android File Transfer (Trasferimento File Android in italian!) - this is the link https://www.android.com/filetransfer/.
My version of Build is V.9.6.8.0.
Solution:
- Connect the phone to pc/mac;
- Go to: Settings -> System -> Developer Options -> Select USB Configuration -> select first "Charge" and then "MTP" (Media Transfer Protocol)
- The system recognize the phone!
[for italian, like me, andare su Impostazioni -> Opzioni Sviluppatore -> Seleziona Configurazione USB -> scegliere "Ricarica" e poi "MTP" (Media Transfer Protocol) ]
robiox said:
Hi,
I had no problem with fastboot and adb with Mac!
Phone recognized by the machine and do transfer boot.img for magisk...
Now I Win!
I can see the internal memory with Android File Transfer (Trasferimento File Android in italian!) - this is the link https://www.android.com/filetransfer/.
My version of Build is V.9.6.8.0.
Solution:
- Connect the phone to pc/mac;
- Go to: Settings -> System -> Developer Options -> Select USB Configuration -> select first "Charge" and then "MTP" (Media Transfer Protocol)
- The system recognize the phone!
[for italian, like me, andare su Impostazioni -> Opzioni Sviluppatore -> Seleziona Configurazione USB -> scegliere "Ricarica" e poi "MTP" (Media Transfer Protocol) ]
Click to expand...
Click to collapse
somehow i was able to connect through fastboot with the help os some advanced users, I unlocked boot and managed to flash original firmware using fastboot mode, the result: no usb connection, no pendrive otg, sd card as internal memory gives storage errors all the time ...
so the phone is faulty, now I am at aliexpress hands claiming for a refund and send back phone
elsita said:
somehow i was able to connect through fastboot with the help os some advanced users, I unlocked boot and managed to flash original firmware using fastboot mode, the result: no usb connection, no pendrive otg, sd card as internal memory gives storage errors all the time ...
so the phone is faulty, now I am at aliexpress hands claiming for a refund and send back phone
Click to expand...
Click to collapse
Where are you from? Where did did you purchase the phone (the actual store, is it in China)? Depending on where are you from and what country did you buy the phone from, by law, you'll get manufacturer warranty. So, any "official" distributor in your country will have to provide a warranty solution for you. If Ali Express is unable to provide you with a solution, look into that.
Let us know how it work out for you
adriakus said:
Where are you from? Where did did you purchase the phone (the actual store, is it in China)? Depending on where are you from and what country did you buy the phone from, by law, you'll get manufacturer warranty. So, any "official" distributor in your country will have to provide a warranty solution for you. If Ali Express is unable to provide you with a solution, look into that.
Let us know how it work out for you
Click to expand...
Click to collapse
I am from Spain, and the aliexpress seller has store in Spain, but you know how chinese vendors act ... no agreement so far, and now aliexpress decides, whenever they turn back to work, because China as you may know is a whole year vacation place for workers ...
Hi all
during without pc next to me. I’m using MacBook Pro to run windows 10 in virtual machine, but now the problem is appearing, how can I get my phone in edl mode and connect to windows? Cause normally, when I connect to MacBook, there’s options for me to choose connect to windows or Mac system. Please help.
Mr-Zhag said:
Hi all
during without pc next to me. I’m using MacBook Pro to run windows 10 in virtual machine, but now the problem is appearing, how can I get my phone in edl mode and connect to windows? Cause normally, when I connect to MacBook, there’s options for me to choose connect to windows or Mac system. Please help.
Click to expand...
Click to collapse
Why do you need EDL mode? If you already unrooted and your phone is working, you shouldn't need MSM. That is mainly used to recover a bricked device.
To get in EDL mode, power off the phone and unplug from the computer. Hold down Vol+ and Vol- while you connect USB to computer. Keep holding both Vol buttons until it gets to EDL mode. I don't know about your virtual machine, you'll just have to look at settings and see if there are different options for how to handle USB devices.
adb reboot edl
is my preferred way when possible. I also found on my windows computer I needed the non-64bit Qualcomm USB driver or my device would just reboot after going into EDL mode.