Develop Bugs

Bricked Samsung B7510 aka Samsung Galaxy Pro

Hello People,
I'm in the crap from toes to neck. My brother was playing with my phone and I don't why he tried to install the Clockword mod recovery. He then turned off the phone. So now I cannot turn it on, put it on download mod and start the stock android recovery.
Can somebody help me. It is my work phone. I have all my important contacts & stuff inside.
Thanks in advance.

spryartist said:
Hello People,
I'm in the crap from toes to neck. My brother was playing with my phone and I don't why he tried to install the Clockword mod recovery. He then turned off the phone. So now I cannot turn it on, put it on download mod and start the stock android recovery.
Can somebody help me. It is my work phone. I have all my important contacts & stuff inside.
Thanks in advance.
Click to expand...
Click to collapse
If your brother installed CWM into your phone, than your phone is rooted, isn't it?
You can download your Stock Rom ( you can find on the phone box your version XWKD1 or XWKF2 )
Stock ROM FROYO 2.2:
For Euro B7510 XWKD1 : http://hotfile.com/dl/127133994/17d5d98/B7510XWKD1_OXXKD1_XXKC3_bysamsdroid.rar.html
For Euro B7510 XWKF2 : http://hotfile.com/dl/124407579/8bb1563/B7510_PRO_B7510XWKF2_.zip.html
---------- Post added at 11:17 PM ---------- Previous post was at 10:34 PM ----------
Now you need Odin v4.28 : http://www.multiupload.com/B12P3BJBE6
Samsung Kies installed in your PC....( I hope that you have already installed the application on the PC)
■Now, after finishing the download you will have to now ensure that you are turning your phone off so that the download mode which is nothing but the safe mode is activated in your phone. After turning Off the phone, you will have to first push the “Q” button to enter in to the download mode which will look like as shown in the below screen shot. If you have successfully entered into the download mode then you will see a green screen which is shown below. Also, additionally note that if the device boots in the normal mode with the home screen then you will have to again switch off the device and retry the process and if despite retrying you are unable to get into download mode then you will have to fix the download mode error for your phone. You can see the download mode screen on how it looks like.
Poza1 ....http://www.4shared.com/photo/zA0HoG80/Poza1.html
■Now, after this you will have to connect the phone to the computer where you have downloaded and extracted the zip file from the above link. Please note that while connecting the USB cable you will have to make sure that the Odin software is open as mentioned and shown above, as soon as you connect the phone to the Odin, the ID COM block will turn yellow after which you will have to enter the files by clicking on the corresponding options as shown below,
Poza2.....[IMG]http://www.4shared.com/photo/k33bdHec/Poza2.html
BOOT – APBOOT_B7510...................md5,
Phone – MODEM_B7510....................md5,
PDA – CODE_B7510..........................md5,
CSC – ....B7510.......CSC...................md5,
■As soon as you feed in the files, you will have to double check the same and then you will have to proceed and click on the “Start” option to start the firmware update process. After clicking on the start, you will see that the firmware will be installed in your phone within a time of not more than 5 minutes.
Poza3......[IMG]http://www.4shared.com/photo/J-0BuaB2/Poza3.html
■Now, you can see that the flashing process is being in process and you will have to make sure that you don’t interrupt the flashing process as this may be fatal for your phone. So, after few minutes of time you will see the Odin screen as shown below,
Poza4......[IMG]http://www.4shared.com/photo/Iyc1MxXQ/Poza4.html
Now, that’s it as soon as you see that the above screen is shown in the Odin, you will have to wait for the home screen to see in the phone and there you go, you have now successfully instal.

Euro B7510 XWKF2 dont have
Phone – MODEM_B 7510.... ....... ....... ..md5
you have this file?

When my galaxy pro is in download mod, on pc driver samsung usb composite device not start win7 so odin is not turn yellow.
I have latest version kies driver, i start odin with administrator. All securty are off. When I connect usb, there is one driver on pc sam.. composte device device but not startted with ( error 10) on win 7…
What should I do?

Samsung Galaxy S4 ACTIVE shv-e470s Rooting Guide

Use this tutorial only with the Samsung Galaxy S4 ACTIVE shv-e470s smartphone.
CAUTION:THIS ROOTING METHOD IS ONLY FOR THE KOREAN VERSION SHV-E470S!!!
It was tested successfully on Samsung Galaxy S4 Active SHV-E470S Android version 4.2.2
Firmware version:E470SKSUANA1
Abstract:
Do not attempt to root any other smartphones with the files that you wil find in this articles.
This tutorial is destined to be used by advanced Android users.
I won’t be blamed in case you brick the phone or lose any data in the process!!!
Rooting the Galaxy S4 ACTIVE SHV-E470S will revoke its warranty. If you want to restore your phone's warranty then you will need to flash an official Samsung Android ROM OS.
Pre-requisites :
Download and install the Samsung USB Drivers on your computer
Disable Samsung KIES program if you have it installed on your computer
Disable any antivirus applications from running on your computer
Enable USB Debugging from Developer Options.
If Developer Options doesn’t appear in Settings, then you need to enable it.
go to Settings, then More, open About Device.
tap seven times on the Build Number.
you will now be enabling Developer Option, go back to main Settings section, scroll down and enable USB Debugging
Check your phone’s battery and make sure that there is at least 50% left before the device switches off
Read the entire post, don’t skip any steps and the guide should be completed in under ten minutes with success.
In case you have trouble completing the guide, then you are free to ask for extra help in comments
Download required files (see attachments)
Odin3 1.85
UPDATE-SuperSU-v1.93
unofficial_philz_touch_6.12.8-e470s
Process:
1. Copy the "UPDATE-SuperSU-v1.93.zip" into your phone internal or external memory
2. Extract the contents of the Odin zip file and place them on your computer’s desktop screen.
3. Power off the Galaxy S4 active shv-e470s now.
4. After that you have to boot the device in Android Download Mode (press and hold: volume down,home and power buttons}
5. Launch Odin on your PC as administrator
6. Connect the phone with your computer via USB cable.(make sure antivirus+firewall is now disabled!!)
7. Wait for ODIN to detect your device,(you should see the "added" message) then continue to the next step.
8. If the phone is not recognized by your PC, then you should re-install the Samsung USB Drivers.
9. Go to ODIN’s main window, click on PDA and then find the "unofficial_philz_touch_6.12.8-e470s.tar" Load it in ODIN.
10. Do not change any other Odin default settings
11. Make sure that the Re-Partition option is not enabled
12. When ready, hit the START button for the process to begin.
13. Don’t press any buttons until the process is complete
14. When ODIN completes the process it will show the PASS alert, then the phone will reboot in normal mode. You can unplug the device from PC when the Samsung Galaxy S4 active shv-e470s boot animation screen loads.
15. Now power off your phone again and boot in recovery mode (press and hold: volume up,home and power buttons)
16. Once in recovery mode,find and install the "UPDATE-SuperSU-v1.93.zip" .To do this,in the recovery menu choose the "install zip" option and then find the directory u have saved the zip file and choose it for installing.
17. Wait for the process to finish and then ur phone will reboot.once reboot u can download "root checker" from play store and verify that u have root access.
18. Have fun and enjoy your rooted SHV-E470s

Did anyone try with E470SKSUAND1 yet?

story said:
Did anyone try with E470SKSUAND1 yet?
Click to expand...
Click to collapse
I tried and it works.

req new download links
The download links has expired . please give me another links.thx

This phone is update to 4.4.2. Are we can't root our phone such as #1?

new files
nickserbanoiu said:
The download links has expired . please give me another links.thx
Click to expand...
Click to collapse
hello my friend....i just renewed the files.

Thanks you !
how about 4.4.2 root, can we use this tool to root?

story said:
I tried and it works.
Click to expand...
Click to collapse
Hi, I also have E470SKSUAND1, but my recovery mode only shows me 4 or 5 options, no install zip option. I looked for the cwm but the shv e470s isn´t supportet yet. How did you do it?

Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.

shv-e470s
Thanh_GSM said:
Hi, I need pit file for this phone or 2gb system dump. Pls help me. My phone is brick now.
Click to expand...
Click to collapse
Bro!! did you repair your shv-e470s boot-loader ?
i have hard bricked my shv-e470s any help?

Does anyone try on E470SKSUCOE1? (lollipop 5.0.1)

Bump for lollipop E470SKSUCOH1 rooting...

Hi, I downgrade my Samsung Galaxy S4 Active (SHV-E470s) from Android 4.4.2 kitkat to Android 4.2.2 JellyBean, Odin says "PASS", it means i successfully flash the 4.2.2 jellybean firmware, then I try to reboot my phone, nothing happens, It won't turn on, I try to charge it but no response, no vibration, it is like completely dead, It is Hard brick? How can I unbrick and revive it? Thank you.

Help with SM-T700

I'm just getting started trying to root my Galaxy Tab S SM-T700, and I have run into a couple problems.
I have installed the USB drivers from Samsung, and I have downloaded and extracted CF_AutoRoot to my desktop.
Now the website I was using to tell me how to do it says that next I need to download the CWM Recovery Image, which brought me to this site.
When I click the link to download it, I get a blue/purple screen saying Access Denied.
Also it says that I have to enter download mode on my Tab S by powering down, then turning it back on holding the power_volume down buttons, and this does not seem to work, it just turns on, but it stays on the powering on splash screen until I release the buttons, and when I release the buttons, it just powers on like normal.
I was going to link a screen shot of the Access Denied thing, but this forum will not let me.

Cheers
Download Mode - Power Off Device, Press Power Button + Volume Down + Home Button until a menu appears, then choose to enter download mode.
For your other problem, go to this link: https://www.androidfilehost.com/?fid=23991606952591595
(Credits to ashyx)
Download the file, extract it and you are left with a .tar file. Now open odin, go to download mode as explained above, connect your device to your pc (I use 3.07 for my T700) and flash it. (Ap, choose .tar file, start)
It will root your device and flash a TWRP custom recovery.

Galaxy Tab Pro 8.4 Device Memory Damaged - Device not resetting

My Samsung Galaxy Tab Pro 8.4 doesn't do anything when I tap the "Reset Device" icon.
When I load it in Recovery Mode, it shows the "Andy" the Android guy with a red "warning sign" over it, and then my device restarts.
Any suggestions/solutions?
Can't upload pictures at the moment to show what I mean because I don't have enough posts =/

"Reset Device" icon?
if you think the device is corrupt boot to fastboot mode and flash the firmware again using odin or the samsung software.

otyg said:
"Reset Device" icon?
if you think the device is corrupt boot to fastboot mode and flash the firmware again using odin or the samsung software.
Click to expand...
Click to collapse
It would say after the start up that the memory is damaged and there's an icon or button below it that says "Reset Device" and tapping that button does nothing.
I'm currently trying to flash a firmware (if I'm using the correct term), by going into fastboot mode. I found the firmwares on theandroidsoul.com and tried all 4 firmwares and got mmc_write fail on the tablet and fail on Odin.
I installed the Samsung drivers, restarted my laptop, everything. Still nothing.
What is the Samsung software that you mentioned and where can I find it?

sorry for late reply you can get the latest official firmware here
http://www.sammobile.com/firmwares/database/SM-T320/
btw Cellular south is for USA models, otherwise download the correct region for your device.
Instructions
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes

otyg said:
sorry for late reply you can get the latest official firmware here
btw Cellular south is for USA models, otherwise download the correct region for your device.
Instructions
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Click to expand...
Click to collapse
Yeah, I visited Sammobile but clicking on regular download doesn't do anything. Clicking on Fast Download takes it to their payment plans page.
I created an account and I still can't click on regular download.
EDIT: I just saw the notice that there's maintenance until the 28th, but premium downloads are still available. Looks like I'll have to wait until then.

Feilong4 said:
Yeah, I visited Sammobile but clicking on regular download doesn't do anything. Clicking on Fast Download takes it to their payment plans page.
I created an account and I still can't click on regular download.
EDIT: I just saw the notice that there's maintenance until the 28th, but premium downloads are still available. Looks like I'll have to wait until then.
Click to expand...
Click to collapse
you can get it here too http://updato.com/firmware-archive-select-model?q=sm-t320

otyg said:
you can get it here too
Click to expand...
Click to collapse
Thanks. I just tried it but it still fails on me.
I still get an mm_write fail on my tablet.

G920P Bricked. "Custom Binary blocked by FRP Lock" Even when trying to charge.

G920P Bricked. "Custom Binary blocked by FRP Lock" Even when trying to charge.
Title says my problem. Odin/My Computer wont even notice when its plugged in. Any idea what I can do? I can enter download mode but once again Odin/My Laptop will not notice it connected.

Try different ports, different cables. Drivers installed?

koop1955 said:
Try different ports, different cables. Drivers installed?
Click to expand...
Click to collapse
Actually got it took connect for about 10 seconds then nothing. Must be the cable.

koop1955 said:
Try different ports, different cables. Drivers installed?
Click to expand...
Click to collapse
When flashing a new rom, it just sits at "Setup connection" in odin

ThgTrolinity said:
When flashing a new rom, it just sits at "Setup connection" in odin
Click to expand...
Click to collapse
If you can get a stable connection, flash the TAR file from here: https://forum.xda-developers.com/sp...uide-links-files-update-root-restore-t3366862
My post has the latest TAR and instructions for flashing using Odin, including a link to a video.

Something must've happened when you turned off Developer mode or somehow got your OEM Unlock unchecked. One of the reasons that an FRP Lock happens is when OEM Unlock isn't checked whilst having a Custom Binary / Custom Software installed.
Turn off your device, press and hold Vol Down + Home Key + Power Button to get into Download mode, Press Vol Up to continue towards download mode.
Download Samsung drivers from Samsung support website, search SM-G920P, and look for v1.5.45.0 for mobile phone
Download Samsung Odin v3.10.7 or which ever preferred version of your choosing.
Download the QB1 Marshmallow TAR or the Nougat Tar from koop1955's post in the general's section thread
Load Samsung Odin in administrator mode, select AP and load the TAR file that you chose, attach your device to the PC and let it load ( COM:## within Samsung Odin )
Start process, should be a 5~10 minute tar install process. Once this process is done the Odin installer will say PASS! in green and your device should automatically reboot if you have auto reboot checked within Odin's Options tab.