Hey all, little embarrassing coming here for this, but I'm in a little bit of a jam. I'm new to flashing custom ROMs, and I was trying to flash my first today, and managed to screw everything up in the process. I can boot into Clockwork mod via my PC, and I can still do everything I need to from there, but I was stupid, and didn't make a Nandroid backup before doing so. So I was wondering if anyone here could lend me theirs that I could slap onto an SD card, and recover my phone with. Any help would be appreciated.
EDIT: Just so we're clear, this isn't an attempt to get personal information. I will take any backups you have, with or without an unlocked bootloader, with or without rooting, with or without custom ROM, anything. Heck, I'd prefer to have it as close to stock as possible, so I can do everything myself. I just need a bit of a bailout here.
Shameful self-bump. I could still really use some help here.
fastboot flash stock recovery
adb side load latest firmware in stock recovery
enjoy
timbernot said:
fastboot flash stock recovery
adb side load latest firmware in stock recovery
enjoy
Click to expand...
Click to collapse
That's a little hard to do when the device isn't recognized by my PC, and I can't get it to boot into any recovery that isn't Clockwork mod via my PC.
Misinko said:
That's a little hard to do when the device isn't recognized by my PC, and I can't get it to boot into any recovery that isn't Clockwork mod via my PC.
Click to expand...
Click to collapse
how do you boot into Clockwork Mod via your pc when the device isn't recognized by your pc?
tabletalker7 said:
how do you boot into Clockwork Mod via your pc when the device isn't recognized by your pc?
Click to expand...
Click to collapse
EDIT: Nevermind, seems I ADB recognizes the device with CWM running. Now I gotta see where to go from there.
Now I've encountered problem number 2: I didn't allow USB debugging for the computer I'm using (USB debugging is ticked in the settings [or at least I think it is], but it's not authorized for my PC). So here's the question: Can I authorize it through Minimal ADB and Fastboot?
Triple post, but it's with a question. I'm nearly positive that this whole ordeal is going on because I tried to boot into recovery mode with the TWRP app when no recovery was available. So now the question is, is there any way I can stop the phone from trying to boot into recovery so I can install a proper one?
Turn it off, then press volume up + power when vibrates, release power while holding volume up, then release volume up as well, it should boot into bootloader where you can fastboot a new recovery.
fastmix said:
Turn it off, then press volume up + power when vibrates, release power while holding volume up, then release volume up as well, it should boot into bootloader where you can fastboot a new recovery.
Click to expand...
Click to collapse
Tried that. Doesn't work. Like I said, it keeps booting into the psudo-recovery mode thing. I can't even boot into the bootloader from there.
http://forum.xda-developers.com/zenfone2/general/guide-brick-soft-hard-bricked-zenfone-2-t3284256
that will help you - besides if you are silly enough to think anyone will just give you something like a backup, come on man, I am dumb but even I am not that dumb
Have u tried to boot into Fastboot from your Cm recovery? If not, there is a way to make the stock firmware flushable by twrp or cm recovery. I don't feel like typing the whole process but if u look around the forum for a sec u should find it pretty easily. Once u do that, everything will be factory again.
Sent from my Z00D using XDA-Developers mobile app
jflow36 said:
Have u tried to boot into Fastboot from your Cm recovery? If not, there is a way to make the stock firmware flushable by twrp or cm recovery. I don't feel like typing the whole process but if u look around the forum for a sec u should find it pretty easily. Once u do that, everything will be factory again.
Click to expand...
Click to collapse
I have tried booting from CWM, but TWRP overrides it still. I'll look into flashing stock firmware through CWM though.
Related
I installed CWM recovery on my G2 and it keeps booting up automatically and I don't like that when I charge it so I want to remove it. What's the best way to remove it or flash stock recovery without losing data? Thanks all!
Try selecting shut down via clockwork menu, it should power device down while still connected to ac
dictionary said:
Try selecting shut down via clockwork menu, it should power device down while still connected to ac
Click to expand...
Click to collapse
I really appreciate your help, but I kinda just want it off my phone completely as I have Autism and it bothers me a lot :\. I am very OCD about this kind of stuff and I just want my phone to turn completely off by itself. Thanks for all your help
Yeah, have the exact same error, I can't even calibrate my battery as it never shut down ...
Sent from my HTC Vision using XDA App
On the sticky about how to revert back to stock there is the stock recovery image. Just flash that and your done. However i seem to recall the reboot thing being a know issue for the hboot? I might be totally wrong about that though. One other thing make sure your really rooted and true s off with the gfree method if you still want root and custom stuff.
Sent from my HTC Vision using XDA App
I might be the only person who actually likes that it goes into recovery when plugged into usb and off. No stupid button combinations to remember. Personally the only time my phone is off is when it's dead. Otherwise it's 24/7 operation. To each his own though. I'm sure there is a guide on how to remove the recovery in the android development section.
locust43 said:
I installed CWM recovery on my G2 and it keeps booting up automatically and I don't like that when I charge it so I want to remove it. What's the best way to remove it or flash stock recovery without losing data? Thanks all!
Click to expand...
Click to collapse
Use this recovery. It is the stock eng-recovery. Its the stock recovery, but has adb enabled in it, just incase something goes wrong at somepoint it might be your window back in...
http://forum.xda-developers.com/showthread.php?t=834627
Put it in your sdk folder, boot into fastboot, then use the fastboot cmd in that post.
@gunlance, I'm the same way, but we all have different ways of using our phones...
dictionary said:
Try selecting shut down via clockwork menu, it should power device down while still connected to ac
Click to expand...
Click to collapse
Where is the powerdown option??? Is it not there or am i blind?
Beast11 said:
Where is the powerdown option??? Is it not there or am i blind?
Click to expand...
Click to collapse
There isn't one. You either have to stay with the phone powered on in Clockwork and charging, or flash back to the stock recovery (e.g. if you have fastboot/adb working, then "fastboot flash recovery recovery.img", where recovery.img is a stock recovery image from the stock ROM).
Here's a video tutorial on how to root your Nexus 10 for noobs!
Windows video tutorial:
Mac video tutorial:
Linux video tutorial:
All the files you need in one zip (adb+SuperSU+fastboot+Windows drivers):
http://downloadandroidrom.com/file/Nexus10/Nexus10RootNew.zip
Step-by-Step tutorial with photos here:
http://nexus10root.com/nexus-10-root/how-to-root-nexus-10-easiest-method/
Also, if you get stuck on bootloop after unlocking bootloader (This happened to me couple times), do a factory reset in stock recovery to fix:
Thanks to shimp208 for the sideload method and working CWM, ChainFire for awesome SuperSU and to all the developers who are worked on CWM recovery!
So the CWM that was just updated by Koushik on CWM does not work properly or does it work? Was asking based on this
While CWM Recovery is still being fixed
Click to expand...
Click to collapse
Edit: There's no driver issue if it were on a Mac right? Especially adb sideloading the CWM SuperSu zip?
How do I flash the stock recovery? CWM isn't working and I tried to update the driver like in the video but couldn't find the "manta" that I needed to update. I'm just stuck in bootloop animation now. I'm downloading the stock image right now to try and flash it back to stock..
johno86 said:
How do I flash the stock recovery? CWM isn't working and I tried to update the driver like in the video but couldn't find the "manta" that I needed to update. I'm just stuck in bootloop animation now. I'm downloading the stock image right now to try and flash it back to stock..
Click to expand...
Click to collapse
If you go into fastboot mode then choose recovery to get to the screen with the red triangle, keep pressing the power button and volume buttons randomly until the stock recovery pops up. From there do a factory reset and it'll work, I just did it to mine!
I flashed the CWM recovery img so when I do what you say it takes me to the bootloader screen and says Downloading. No red triangle. It boots into CWM and then after 20 seconds restarts itself and hits the bootanimation loop. Any clue what to do next? Trying to flash the stock image but having issues using cmds in windows cmd
*edit
I cleared cache through cmd and i got to the red triangle...thank ****ing the lord. DTWAZERE, I will remember tonight. Thank you for your help.
johno86 said:
I flashed the CWM recovery img so when I do what you say it takes me to the bootloader screen and says Downloading. Any clue what to do next? Trying to flash the stock image but having issues getting it into fastboot now...
Click to expand...
Click to collapse
Thing is it will delete the CWM recovery when you leave it so you'll have to reflash it, which is why this is so unstable!
I had the exact same thing as you and this is what I did:
Press the power button to turn it off while it says downloading
Hold both volume buttons down and power on to get into fastboot
Choose recovery
Press power and volume buttons randomly when the red triangle appears until you get stock recovery
Choose Factory Reset
Reboot
You should be able to get back into the rom that way,
to root it you need to boot into fastboot again, reflash the recovery, and sideload the superuser apk
dtwazere said:
Thing is it will delete the CWM recovery when you leave it so you'll have to reflash it, which is why this is so unstable!
I had the exact same thing as you and this is what I did:
Press the power button to turn it off while it says downloading
Hold both volume buttons down and power on to get into fastboot
Choose recovery
Press power and volume buttons randomly when the red triangle appears until you get stock recovery
Choose Factory Reset
Reboot
You should be able to get back into the rom that way,
to root it you need to boot into fastboot again, reflash the recovery, and sideload the superuser apk
Click to expand...
Click to collapse
Yeah this is exactly what I did and it worked. I'll wait on flashing anything until there's a stable recovery. I was fairly confident in what I was doing until that happened. Not being able to input commands from cmd prompt made me sick so I'll wait for a dev to release something that works without having to quickly install the drivers again within a 15-20 second timeframe. Too much stress.
cant boot
I got a huge problem.
I follow the step and going on. Ive seen the done in CWMR. But the tablet cant boot.
It stops in the second animation( X mark) cant boot in os.
Anyone can help me?
lc684760 said:
I got a huge problem.
I follow the step and going on. Ive seen the done in CWMR. But the tablet cant boot.
It stops in the second animation( X mark) cant boot in os.
Anyone can help me?
Click to expand...
Click to collapse
Heh im having the same issue.
lc684760 said:
I got a huge problem.
I follow the step and going on. Ive seen the done in CWMR. But the tablet cant boot.
It stops in the second animation( X mark) cant boot in os.
Anyone can help me?
Click to expand...
Click to collapse
I'm having the same issue. Stuck on the 2nd splash screen with the Nexus Logo.
I received successful messages after every entry.
deevooneh said:
I'm having the same issue. Stuck on the 2nd splash screen with the Nexus Logo.
I received successful messages after every entry.
Click to expand...
Click to collapse
sucks. But we can boot in fastboot and downloading . I think we may have some tricks to fix.
i did everything, and it all went successfully after a few tried. Now i am stuck with the JB X load screen.
How do i get the stock google rom and how do i flash it?
lc684760 said:
sucks. But we can boot in fastboot and downloading . I think we may have some tricks to fix.
Click to expand...
Click to collapse
Ok. Let me know if you figure something out. Hopefully we didnt brick it.
deevooneh said:
Ok. Let me know if you figure something out. Hopefully we didnt brick it.
Click to expand...
Click to collapse
I just called service phone. But goole play agent told me that they didnt know how to deal with that. Its the new device. They dont know much. Damn it!
lc684760 said:
I just called service phone. But goole play agent told me that they didnt know how to deal with that. Its the new device. They dont know much. Damn it!
Click to expand...
Click to collapse
How do we get back to stock? Might need to reattempt this.
If you are stuck on the boot animation (X) screen... power off your device and enter fastboot mode and then type fastboot -w... I has this problem and this fixed it!
NOTE: fastboot -w will wipe your internal storage completely
dtwazere said:
If you go into fastboot mode then choose recovery to get to the screen with the red triangle, keep pressing the power button and volume buttons randomly until the stock recovery pops up. From there do a factory reset and it'll work, I just did it to mine!
Click to expand...
Click to collapse
deevooneh said:
How do we get back to stock? Might need to reattempt this.
Click to expand...
Click to collapse
Stock is here
https://developers.google.com/android/nexus/images#mantarayjop40c
Still need a way to get CWM stable, so we have time to copy to sd
craigacgomez said:
If you are stuck on the boot animation (X) screen... power off you devices and enter fastboot mode and then type fastboot -w... I has this problem and this fixed it!
NOTE: fastboot -w will wipe your internal storage completely
Click to expand...
Click to collapse
THIS WORKED!!
Youre a genius. thanks!
When I try to install the manta drivers manually and tell it to search the same area that it searched and found the android bootloader drivers for fastboot mode it says that the drivers couldn't be found and installed. Am I missing something? Also if i try to do fastboot flash recovery it gives me an error message stating that it cannot determine the image filename for the recovery image.
Well i guess i did it the long way around.
Went to https://developers.google.com/android/nexus/images#mantarayjop40c
and downloaded the Nexus 10 file. extracted, and the actual files in the Nexus10Root folder.
Opened the flash-all.sh and entered each command manually because it was erroring out running the script.
After the 3rd command it booted right into android!
Can anyone assist me with the issue of how to get this SGSIII out of boot recovery mode/
Odin gives a FAIL, PIT Partition not found error! The phone itself gives Odin: Flash read failure
N2PC Tech said:
Can anyone assist me with the issue of how to get this SGSIII out of boot recovery mode/
Odin gives a FAIL, PIT Partition not found error! The phone itself gives Odin: Flash read failure
Click to expand...
Click to collapse
Some more details would help me understand better. What I'd love to know is.
1. What is the current state of the phone ?
2. Is it rooted or Are you trying to root ? If so what process.
3. Are you trying to flash a rom or Recovery or what ?
4. Last but not least. What rom and version you currently have on there ?
Perseus71 said:
Some more details would help me understand better. What I'd love to know is.
1. What is the current state of the phone ? Stuck in "Boot recovery mode"
2. Is it rooted or Are you trying to root ? If so what process. not rooted at all.
3. Are you trying to flash a rom or Recovery or what ? was trying to install stock rom.
4. Last but not least. What rom and version you currently have on there ? I currently have no rom on here at all!
Click to expand...
Click to collapse
N2PC Tech said:
Some more details would help me understand better. What I'd love to know is.
1. What is the current state of the phone ? Stuck in "Boot recovery mode"
2. Is it rooted or Are you trying to root ? If so what process. not rooted at all.
3. Are you trying to flash a rom or Recovery or what ? was trying to install stock rom.
4. Last but not least. What rom and version you currently have on there ? I currently have no rom on here at all!
Click to expand...
Click to collapse
You didn't specify how you got here .What did you try to do, that left you in this state ? Am I assuming correctly that you somehow managed to wipe system partition and have only the stock recovery ?
If the phone is in Recovery mode, Odin will not work. You will need to reboot the phone into Download mode. To do this, you pull the battery out, volume down, home, and power button at the same time until you see the Samsung logo, and then release. You will see a warning message with bright yellow triangle and will say Downloading. Once that is done, connect to the PC.
Using ODIN, first flash a custom recovery such as TWRP. If you want to go back to stock, this is the time you flash Stock rom instead of the recovery.
If you want custom rom, copy the rom zip to the External SD card and then put that in the phone and flash via Custom Recovery.
Perseus71 said:
You didn't specify how you got here .What did you try to do, that left you in this state ? Am I assuming correctly that you somehow managed to wipe system partition and have only the stock recovery ?
If the phone is in Recovery mode, Odin will not work. You will need to reboot the phone into Download mode. To do this, you pull the battery out, volume down, home, and power button at the same time until you see the Samsung logo, and then release. You will see a warning message with bright yellow triangle and will say Downloading. Once that is done, connect to the PC.
Using ODIN, first flash a custom recovery such as TWRP. If you want to go back to stock, this is the time you flash Stock rom instead of the recovery.
If you want custom rom, copy the rom zip to the External SD card and then put that in the phone and flash via Custom Recovery.
Click to expand...
Click to collapse
Sorry.....
the phone was loading that QHSUSB_DLOAD driver on windows every time i plugged into my PC. I then tried to Odin to a Stock TMO Rom, and that was when i got the Boot recovery mode screen. i have been trying to use the buttons to get into download mode, but that doesnt work either!
N2PC Tech said:
Sorry.....
the phone was loading that QHSUSB_DLOAD driver on windows every time i plugged into my PC. I then tried to Odin to a Stock TMO Rom, and that was when i got the Boot recovery mode screen. i have been trying to use the buttons to get into download mode, but that doesnt work either!
Click to expand...
Click to collapse
QHSUSB_DLOAD means your device is hard Bricked. Please follow De-Bricking thread in this sub forum.
Perseus71 said:
QHSUSB_DLOAD means your device is hard Bricked. Please follow De-Bricking thread in this sub forum.
Click to expand...
Click to collapse
Thats how i got it out of hard brick mode. i used the sdcard image method, and that was as far as the phone went: boot recovery mode!:fingers-crossed:
N2PC Tech said:
Thats how i got it out of hard brick mode. i used the sdcard image method, and that was as far as the phone went: boot recovery mode!:fingers-crossed:
Click to expand...
Click to collapse
Then perhaps you should have asked on that thread for next steps. Anyway, if you are still getting the Qsub message when connecting to pc that means its not out of de-brick yet. I'd suggest following there.
Also please first put the phone in download mode and THEN connect to the PC. Tell me what happens in that case.
Perseus71 said:
Then perhaps you should have asked on that thread for next steps. Anyway, if you are still getting the Qsub message when connecting to pc that means its not out of de-brick yet. I'd suggest following there.
Also please first put the phone in download mode and THEN connect to the PC. Tell me what happens in that case.
Click to expand...
Click to collapse
Perhaps not Perseus! AS stated........Its out of the brick mode and is now stuck in boot recovery mode! The method to get it into download mode is null, because it will only go into the boot recovery mode when i push those buttons to try and get it there! NOTE: its now in MSM9860 when plugged into the PC.
N2PC Tech said:
Perhaps not Perseus! AS stated........Its out of the brick mode and is now stuck in boot recovery mode! The method to get it into download mode is null, because it will only go into the boot recovery mode when i push those buttons to try and get it there! NOTE: its now in MSM9860 when plugged into the PC.
Click to expand...
Click to collapse
Please note, the button combo slightly differs for Recovery versus Download mode
Recovery Booting - Power +Home + Volume UP
Download Mode - Power +Home + Volume DOWN
Do you still have the sd setup from the debrick thread? Can you see if you can get back to download mode by booting from that again?
If so, try flashing the Stock firmware again, and if you still end up in the same spot maybe try again, but this time flash CWM or TWRP recovery from Odin, then flash a Rom from recovery.
And I can't remember right off but did you try factory resetting from recovery?
Sent from my SGH-T999N using Tapatalk
Perseus71 said:
Please note, the button combo slightly differs for Recovery versus Download mode
Recovery Booting - Power +Home + Volume UP
Download Mode - Power +Home + Volume DOWN
Click to expand...
Click to collapse
Sorry, but those methods aren't and haven't worked since my phone came out of brick mode! I had already constantly tried that!
N2PC Tech said:
Sorry, but those methods aren't and haven't worked since my phone came out of brick mode! I had already constantly tried that!
Click to expand...
Click to collapse
In that Case boot the phone using the files of the SD Card as per the De-Brick Thread. See if you can into Downloading mode that way.
Perseus71 said:
In that Case boot the phone using the files of the SD Card as per the De-Brick Thread. See if you can into Downloading mode that way.
Click to expand...
Click to collapse
Tried that method also and no luck!
Just to clarify, the boot recovery mode you are referring to, does it have the binary/flash count, system status, etc? Basically what do you see?
It sounds in some ways you are in download mode, but recovery is a very different mode, so just to clear up any confusion.....
Sent from my SGH-T999N using Tapatalk
Hi,
This may be a stupid question but I'm new to Samsung phones so I don't know all the details (I've only been using HTC so far).
So I've followed all the steps and got root fine. However, I tried to reboot into recovery afterwards and it's like Clockworkmod has vanished.... It just gets into what looks to me like the stock recovery. Am I doing something wrong or does the phone automatically restore its stock recovery???
Also, can someone explain to me if it is possible to manually flash a recovery from the img file using fastboot like you do on HTC phones?
Oh, and another thing. What's this Odin thing? I never used anything like that with HTC...
Thanks
ovimunt said:
Hi,
This may be a stupid question but I'm new to Samsung phones so I don't know all the details (I've only been using HTC so far).
So I've followed all the steps and got root fine. However, I tried to reboot into recovery afterwards and it's like Clockworkmod has vanished.... It just gets into what looks to me like the stock recovery. Am I doing something wrong or does the phone automatically restore its stock recovery???
Also, can someone explain to me if it is possible to manually flash a recovery from the img file using fastboot like you do on HTC phones?
Oh, and another thing. What's this Odin thing? I never used anything like that with HTC...
Thanks
Click to expand...
Click to collapse
May I ask what variant you are using? GT-i9195?
Then please boot your phone into download mode, this can be done by first switching of your phone completely then holding the power button, home button and volume down button until the download screen appears where you press continue. Once you have done that connect your phone using the usb cable and make sure all drivers have been installed! Once the drivers are installed start up Odin uncheck the f.rest time box and click the AP section and then select the recovery file provided by Sir Arco in the root thread.
If you need more help please ask, If it worked then still reply
Odin is the software used to flash files to Samsung phones.
You will need to catch the first recovery boot after flashing the recovery image, or else the stock recovery will be reflashed once the phone boots up. Just reflash the recovery via Odin and make sure to boot into recovery right after the phone reboots after the flash.
Whosat said:
Odin is the software used to flash files to Samsung phones.
You will need to catch the first recovery boot after flashing the recovery image, or else the stock recovery will be reflashed once the phone boots up. Just reflash the recovery via Odin and make sure to boot into recovery right after the phone reboots after the flash.
Click to expand...
Click to collapse
Thanks for the response. Yeah, I kind of realized that's what's happening. I've managed to boot into the custom recovery right after the flash and did what I had to do in there, but then after I reboot the phone again, the custom recovery is gone. Is there a way to stop stock recovery being reflashed automatically?
Also, if I want to install a custom kernel, how can I backup the current one so that I can restore it at a later date if I need to? I know how to do this on HTC phones but it all seems to be a bit different on Samsung and I don't want to mess up anything.
How did you reboot? If you select the reboot option in the CWM recovery,it should follow with a question on whether you want to continue rebooting with reverting to stock recovery or not.
Whosat said:
How did you reboot? If you select the reboot option in the CWM recovery,it should follow with a question on whether you want to continue rebooting with reverting to stock recovery or not.
Click to expand...
Click to collapse
Umm... yeah, I think it did ask but I just accidentally pressed no before reading what it said... So I guess I'll just have to flash the recovery again and then answer yes to that question.
Thanks
Yes that would be the correct way to do it.
Hope all goes well!
Hi,
I've really big problem and i hope that here i get sugestion...
1, I try flash new ROM to my phone. I copy ROM to "SD card" but in wrong version.
After this I into Flashtool get new Kernel and new ver. of TWRecovery. Then I go to recovery and start flashing as every time before...
2, But now I'm in bad sittuation. I can only get into recovery... When i want to go to bootloger, i can't. Every time when I go to bootloger from recovery, i'm back in recovery. Every time is phone reaction the same as I hold power up button+vol. up. And I'm only in recovery.
When I want transfer some ROM to phone, I can't. Cose when I Mount USB massstorage I see phone as "Elementary sys device". I have install ABD device drivers...
Changelog I can't get you, cose it's in "SD card"...
3, Please, Show me "the way" out of this sh*t... I use HTC HD2 few years, all time flashing. Now I use Xperia S for 3 yr. All time flashing. But now I'm in a wrong way ind can't get my phone to standby
Thank you for answers!
magntwo said:
Hi,
I've really big problem and i hope that here i get sugestion...
1, I try flash new ROM to my phone. I copy ROM to "SD card" but in wrong version.
After this I into Flashtool get new Kernel and new ver. of TWRecovery. Then I go to recovery and start flashing as every time before...
2, But now I'm in bad sittuation. I can only get into recovery... When i want to go to bootloger, i can't. Every time when I go to bootloger from recovery, i'm back in recovery. Every time is phone reaction the same as I hold power up button+vol. up. And I'm only in recovery.
When I want transfer some ROM to phone, I can't. Cose when I Mount USB massstorage I see phone as "Elementary sys device". I have install ABD device drivers...
Changelog I can't get you, cose it's in "SD card"...
3, Please, Show me "the way" out of this sh*t... I use HTC HD2 few years, all time flashing. Now I use Xperia S for 3 yr. All time flashing. But now I'm in a wrong way ind can't get my phone to standby
Thank you for answers!
Click to expand...
Click to collapse
Boot phone into recovery, then run following command to copy the ROM to phone memory.
Code:
adb push /path/to/ROM.zip /sdcard/
Then flash the ROM via recovery!
Mirhawk said:
Boot phone into recovery, then run following command to copy the ROM to phone memory.
Code:
adb push /path/to/ROM.zip /sdcard/
Then flash the ROM via recovery!
Click to expand...
Click to collapse
You mean into terminal command? I need to get phone into fasboot. then I can do what I want.. Now it's dead phone... It was happend when I want to flash yours ROM. But i miss one step, flash boot.img
magntwo said:
You mean into terminal command? I need to get phone into fasboot. then I can do what I want.. Now it's dead phone... It was happend when I want to flash yours ROM. But i miss one step, flash boot.img
Click to expand...
Click to collapse
Recovery is TWRP. The one with menu of install, wipe and all. You need to boot into that and use the adb on PC.
Mirhawk said:
Recovery is TWRP. The one with menu of install, wipe and all. You need to boot into that and use the adb on PC.
Click to expand...
Click to collapse
Yes, I'm in TWRP, exactly v.2.8.0.1, from topic of your ROM. Bud now I can't connect phone via ABD drivers. I try it via apps and two ways via Commans window.
I'm only in TWRP. I can't get to fastboot, I can't install ROM now, phone reaction is the same as I hold power up+vol up button.
I need one of two ways... 1,get phone connected with PC via fastboot to flash new kernel, boot.img and at least your ROM
2,get phone connected with PC via mass storage, to get some old ROM, flash it and get to fastboot...
For example:
magntwo said:
Yes, I'm in TWRP, exactly v.2.8.0.1, from topic of your ROM. Bud now I can't connect phone via ABD drivers. I try it via apps and two ways via Commans window.
I'm only in TWRP. I can't get to fastboot, I can't install ROM now, phone reaction is the same as I hold power up+vol up button.
I need one of two ways... 1,get phone connected with PC via fastboot to flash new kernel, boot.img and at least your ROM
2,get phone connected with PC via mass storage, to get some old ROM, flash it and get to fastboot...
For example:
Click to expand...
Click to collapse
You cannot use fastboot command in recovery, You can use the adb commands only. Did Yo try pushing the ROM to phone?
Mirhawk said:
You cannot use fastboot command in recovery, You can use the adb commands only. Did Yo try pushing the ROM to phone?
Click to expand...
Click to collapse
Yes, I was... I have in "sd card" save my last ROM+gapps. As I wrote, two ways when I try it. One is Fail of flash by TWRP, second fall of TWRP during flash.
Ty for "want to help"!
magntwo said:
Yes, I was... I have in "sd card" save my last ROM+gapps. As I wrote, two ways when I try it. One is Fail of flash by TWRP, second fall of TWRP during flash.
Ty for "want to help"!
Click to expand...
Click to collapse
Ah apologies, got lost while replying.
Anyways, lets start from basic. Can You try un-installing and installing the fastboot drivers? Because I suspect that's why You are not able to enter into fastboot mode.
Mirhawk said:
Ah apologies, got lost while replying.
Anyways, lets start from basic. Can You try un-installing and installing the fastboot drivers? Because I suspect that's why You are not able to enter into fastboot mode.
Click to expand...
Click to collapse
I try it, but no way.. The same.
magntwo said:
I try it, but no way.. The same.
Click to expand...
Click to collapse
Can You try using a different PC/Laptop?
Mirhawk said:
Can You try using a different PC/Laptop?
Click to expand...
Click to collapse
I tryed my Vaio laptom and Dell laptom from my work. Both wrong... I'm completlly helplessly in this moment.
magntwo said:
I tryed my Vaio laptom and Dell laptom from my work. Both wrong... I'm completlly helplessly in this moment.
Click to expand...
Click to collapse
Just a sec, what combination do You use to go into bootloader? Power up+volume up? That is not what Yo do, You disconnect the phone from cable, and then turn off the phone. Then just press volume up, and connect the phone. No other button is needed to be pressed.
Mirhawk said:
Just a sec, what combination do You use to go into bootloader? Power up+volume up? That is not what Yo do, You disconnect the phone from cable, and then turn off the phone. Then just press volume up, and connect the phone. No other button is needed to be pressed.
Click to expand...
Click to collapse
Thank you. This is the way.. Now I'm in fastboot.... I gona flash kernel 2.8.0.1, then boot.img from your ROM and finally the ROM
magntwo said:
Thank you. This is the way.. Now I'm in fastboot.... I gona flash kernel 2.8.0.1, then boot.img from your ROM and finally the ROM
Click to expand...
Click to collapse
Finally! Follow the procedure here to flash a Kitkat/Lollipop ROM.
Mirhawk said:
Finally! Follow the procedure here to flash a Kitkat/Lollipop ROM.
Click to expand...
Click to collapse
Re: one more...
Quote:
Originally Posted by magntwo
Sorry, again...
As I wrote, I have in this moment folder with everything, nAOSP 5.0 b12, gapps-lp-20141109-signed, boot-carbon_3-11-14, beta SU v2.44, kernel v2.
As you know, two things, get this folder to phone and get fastboot, in this moment i'll be there, where I want to be
Ty!
Hi, can You please post it in a thread and tag Me? The messages kinda confuse Me!
.
Click to expand...
Click to collapse
Here we're... Thank you.
magntwo said:
Here we're... Thank you.
Click to expand...
Click to collapse
Apologies, might have missed out Your quote earlier. So You now have ROM and other stuff in the phone. What problem are You facing Now? Also I would recommend the new released version b14c with kernel from b14d of nAOSP.
Mirhawk said:
Apologies, might have missed out Your quote earlier. So You now have ROM and other stuff in the phone. What problem are You facing Now? Also I would recommend the new released version b14c with kernel from b14d of nAOSP.
Click to expand...
Click to collapse
simply... I get to bootloader as we wrote last. Then I flash kernel, and phone died. Now I can only charge or see a Sony logo. I can ONLY this now. no buttons helps, no different cable/slot/PC helps... I'M only in charging mod, after turn on only logo see. no TWRP, no bootloger.
magntwo said:
simply... I get to bootloader as we wrote last. Then I flash kernel, and phone died. Now I can only charge or see a Sony logo. I can ONLY this now. no buttons helps, no different cable/slot/PC helps... I'M only in charging mod, after turn on only logo see. no TWRP, no bootloger.
Click to expand...
Click to collapse
So You can't even go into bootloader now? That's weird and also makes this a bit complicated! Because You need to be able to go into bootloader mode to flash a new kernel which has recovery. Hope You are pressing only volume while connecting phone to PC. Drivers are fine as You were able to flash a kernel earlier. Which Kernel did You flash first? If You are able to go into bootloader, then flash this kernel via fastboot mode.
Mirhawk said:
So You can't even go into bootloader now? That's weird and also makes this a bit complicated! Because You need to be able to go into bootloader mode to flash a new kernel which has recovery. Hope You are pressing only volume while connecting phone to PC. Drivers are fine as You were able to flash a kernel earlier. Which Kernel did You flash first? If You are able to go into bootloader, then flash this kernel via fastboot mode.
Click to expand...
Click to collapse
Ok, I flash it. But I really can't into bootloader. If I hold vol button, conn cable only red, charging light... Now I really don't know what else.
magntwo said:
Ok, I flash it. But I really can't into bootloader. If I hold vol button, conn cable only red, charging light... Now I really don't know what else.
Click to expand...
Click to collapse
So You were able to flash the kernel I gave? Then You should be able to boot into CWM recovery. The Kernel logo will be of a Android bot.