Need full tempered glass screen protector - Sony Xperia XA Ultra Accessories

Just looking for any leads for a full screen tempered glass screen protector that actually cover the front. The one I have purchased doesn't cover the edges and glass just extends over curved area about an 1/8 of an inch. Need one which is actually curved on ends and makes contact.

TE TOQUE said:
Just looking for any leads for a full screen tempered glass screen protector that actually cover the front. The one I have purchased doesn't cover the edges and glass just extends over curved area about an 1/8 of an inch. Need one which is actually curved on ends and makes contact.
Click to expand...
Click to collapse
Check Amazon they actually have some specific to our xa screen with the rolled edges supposed to fit perfectly and give full protection. I've not got one yet as still waiting for my Amazon gift card to arrive I got for upgrading there's cases too even genuine Sony ones
Sent from my Xperia XA using XDA Labs

aidy.lucas said:
Check Amazon they actually have some specific to our xa screen with the rolled edges supposed to fit perfectly and give full protection. I've not got one yet as still waiting for my Amazon gift card to arrive I got for upgrading there's cases too even genuine Sony ones
Sent from my Xperia XA using XDA Labs
Click to expand...
Click to collapse
I've seen many with the rolled edges that say xa, but they are for the regular 5 inch xa and not the xa ultra ;(

TE TOQUE said:
Just looking for any leads for a full screen tempered glass screen protector that actually cover the front. The one I have purchased doesn't cover the edges and glass just extends over curved area about an 1/8 of an inch. Need one which is actually curved on ends and makes contact.
Click to expand...
Click to collapse
Can you tell if the screen gets easily scratched withthout the protector like previous sony models? Or is it more like the Samsung s7 and note glass that doesn't need a protector?

TE TOQUE said:
I've seen many with the rolled edges that say xa, but they are for the regular 5 inch xa and not the xa ultra ;(
Click to expand...
Click to collapse
Not looking very hard first one in the list so there has to be more..
Sony Xperia XA Ultra Screen Protector, G-Color Tempered Glass Scr... http://www.amazon.co.uk/dp/B01G5F6WK0/ref=cm_sw_r_other_udp_apa_92VSxb48EQ4YE
Sent from my Xperia XA using XDA Labs

I have that one and it is exactly how I stated in my first post it's just a flat piece of glass that would fit perfectly if our screens were completely flat from edge to edge.

TE TOQUE said:
I have that one and it is exactly how I stated in my first post it's just a flat piece of glass that would fit perfectly if our screens were completely flat from edge to edge.
Click to expand...
Click to collapse
That was just the first I came across it wasn't the only one, surely the same companies that make the proper fitting xa one's that have the internal curve underneath to fit perfectly will do xa ultra ones
Sent from my Xperia XA using XDA Labs

Here's one I found on EBay with full coverage http://pages.ebay.com/link/?nav=item.view&id=131904806361&alt=web

Thank you, I just ordered that one and another I found.

Let me know how the one I recommended fits. Thanks.

TE TOQUE said:
Thank you, I just ordered that one and another I found.
Click to expand...
Click to collapse
Have you recieved it yet?

I did, I actually ordered 2 different 3d full screen tempered glass protectors. The are both the same. They only seal on edges of glass and allow dust and dirt in openings for camera and proximity sensor. The center of glass does not fuse with adhesive as other protective glass. Basically it's a glass cover Sq

TE TOQUE said:
I did, I actually ordered 2 different 3d full screen tempered glass protectors. The are both the same. They only seal on edges of glass and allow dust and dirt in openings for camera and proximity sensor. The center of glass does not fuse with adhesive as other protective glass. Basically it's a glass cover Sq
Click to expand...
Click to collapse
Not better on XA, only a small adhesive line on the border of the protection, corners are less sensitive to fingers and like you some dust by cam and proximity sensor, just better than nothing... Tried one previou without 2.5D, too small and very ugly for the screen but no dust.

rrvuhpg said:
Not better on XA, only a small adhesive line on the border of the protection, corners are less sensitive to fingers and like you some dust by cam and proximity sensor, just better than nothing... Tried one previou without 2.5D, too small and very ugly for the screen but no dust.
Click to expand...
Click to collapse
Same thing here, better than nothing. Unfortunately some debris got under protector through opening on proximity sensor and scratched my screen.

TE TOQUE said:
Same thing here, better than nothing. Unfortunately some debris got under protector through opening on proximity sensor and scratched my screen.
Click to expand...
Click to collapse
I've decided to leave the screen protection for now and gone with a orzly slim fit case. All the screen protection is either ugly as hell with three small daft holes for the camera, Sony logo and proximity sensor or they don't cover the whole screen and look as much use a chocolate fireguard
Sent from my Xperia XA using XDA Labs

TE TOQUE said:
Same thing here, better than nothing. Unfortunately some debris got under protector through opening on proximity sensor and scratched my screen.
Click to expand...
Click to collapse
Ouch sorry to hear that. Does it at least have oleophobic coating?
I think I'll pass on screen protector just like on my other two phones. Todays 2.5D glas screens doesn't allow for good protectors unfortunately.

Tried like 3 TGP but nothing stays more than a week. So moved to gadgetshieldz thin screen protector. It stays calmly on my XA ultra.
http://www.gadgetshieldz.com/xperia-xa-ultra-screen-protectors-covers-cases.html

anjugeorge said:
Tried like 3 TGP but nothing stays more than a week. So moved to gadgetshieldz thin screen protector. It stays calmly on my XA ultra.
http://www.gadgetshieldz.com/xperia-xa-ultra-screen-protectors-covers-cases.html
Click to expand...
Click to collapse
I know this is a year old thread but got the phone last week for only $150 so i figured I'd bump with some info.
Found your post and ordered that film as well. Didn't realize it was shipping from India though so there is a wait. But thanks for the tip.
Bought this film (2 pack) in the meantime which is applied dry and surprisingly didn't bubble at all. Might actually keep it on the phone and keep the one you got as a backup. It doesn't wrap, but is pretty good
https://www.amazon.com/dp/B073B418NN?ref=yo_pop_ma_swf
Just in case anyone else stumbles on this page after buying the phone.

SyCoREAPER said:
I know this is a year old thread but got the phone last week for only $150 so i figured I'd bump with some info.
Found your post and ordered that film as well. Didn't realize it was shipping from India though so there is a wait. But thanks for the tip.
Bought this film (2 pack) in the meantime which is applied dry and surprisingly didn't bubble at all. Might actually keep it on the phone and keep the one you got as a backup. It doesn't wrap, but is pretty good
https://www.amazon.com/dp/B073B418NN?ref=yo_pop_ma_swf
Just in case anyone else stumbles on this page after buying the phone.
Click to expand...
Click to collapse
Go and try the back one atleast when you receive it. I still have the device installed with the protector it looks great but that's my secondary phone so i'm not using it much..

Related

Nillkin Amazing H+ tempered glass screen protector

Here is my Nillkin Amazing H+ tempered glass review, complete with scratch test and installation instructions on Sony Xperia Z1.
Video is timetagged so you can jump to the section of interest:
00:00 Box Contents
01:03 How to apply? - Fitting on Sony Xperia Z1
04:05 Scratch Test
04:55 Conclusion
I'll get this screen protector for my new xiaomi mi3, so thank for your review, you helped me to made my choice
This looks amazing!
I found one on eBay for 12€.. I might buy it.
Is there any downside from using this screen protector?
Thanks a lot.
http://www.ebay.com/itm/Nillkin-9H-Hardness-Tempered-Glass-Front-Clear-Back-Protectors-for-Xperia-Z1-/261360379196?pt=US_Tablet_eReader_Screen_Protectors&hash=item3cda4ae53c
Thank you for your amazing review!
No real downside other than you really have to do your best to apply it perfectly the first time. Very difficult to remove and reapply without getting it dirty.
Love how it feels, so smooth. I wish I got it sooner, before the Sony screen protector started getting scratches. Never using a film protector ever again.
My C6906 came with a nilkin glass screen protector when I bought it off of swappa, and using the way I typically apply screen protectors, using tape like a hinge to perfectly position the protector with, application took less than a minute. My only complaint is that the glass is not oleophobic, or at least isn't as oleophobic as I would like, although it doesn't get fingerprints all that easily, and a few wipes on your jeans should take care of it just fine.
i bought this screen protector for CNY 58 (about USD 9.5). Much better than any PET films I have seen.
DefunctiO said:
This looks amazing!
I found one on eBay for 12€.. I might buy it.
Is there any downside from using this screen protector?
Thanks a lot.
http://www.ebay.com/itm/Nillkin-9H-Hardness-Tempered-Glass-Front-Clear-Back-Protectors-for-Xperia-Z1-/261360379196?pt=US_Tablet_eReader_Screen_Protectors&hash=item3cda4ae53c
Click to expand...
Click to collapse
Only downside is that come with with a PET back protector and I found the anti-fingerprint coating wore off faster than most, it's also is a bit small and doesn't cover the whole front wish it was more precise fitting.
If you apply this screen protector the Z1 will do not fit on your dock DK31.
Do I insert it over sony's protector or do I have to remove that first?
gohabs93 said:
Do I insert it over sony's protector or do I have to remove that first?
Click to expand...
Click to collapse
You can safely place it over the Sony's protector. That's what I did in the video and it stayed on since than no problem.
gohabs93 said:
Do I insert it over sony's protector or do I have to remove that first?
Click to expand...
Click to collapse
It's recommended to do not remove the anti-shatter Sony protector so you can apply this Nillkin on it.
Great Thanks! I just bought one!
gohabs93 said:
Do I insert it over sony's protector or do I have to remove that first?
Click to expand...
Click to collapse
Either way. It's up to you to remove the shatter film or put the t-glass on top of it
its wicked man this is perfect feeling just like my s3 with this on also so smoooooth
I have this Nillkin SP and it's the best SP I ever had, on all devices.
Perfectly slik and ultra durable...
I have it few months and not a one scratch.
But...
I bought front and back and I'm kinda disappointed because only front is real tempered glass, back one is just a plain SP...
It would be awesome to have back tempered glass as well.
And yeah...I applied it on top of Sony SP (had few little scratches on it) and it's perfect - can't see a single old scratch...
Sent from my C6903 using Tapatalk
with this installed, will the ultra thin aluminum bumper fit well?
Nillkin Tempered glass cracked on its own!
I installed a Nillkin tempered glass a month ago. Recently, the screen just cracked on its own. No impact or poor handling whatsoever. I guess it is just poor quality product in premium packing. Really disappointed that such bad quality can come from Nilkin .....
koj012 said:
I installed a Nillkin tempered glass a month ago. Recently, the screen just cracked on its own. No impact or poor handling whatsoever. I guess it is just poor quality product in premium packing. Really disappointed that such bad quality can come from Nilkin .....
Click to expand...
Click to collapse
I have been using Nillkin for a while now and have never experiences such problem. My first protector cracked after I dropped the phone face down on my desk. Now I am on my second one and it functions properly. Maybe you didn't align yours properly or you had a faulty unit.
Sent from my C6903 using Tapatalk
@shem2409
Hi there.. I was considering buying the Nillkin glass, and I was wondering if you noticed any scuff marks or scratches on glass surface while using the DK31 magentic charger? (assuming you use one).
Thanks!
Sent from my C6903 using Tapatalk

OnePlus X - Tempered Glass Screenprotector

I ordered the original temepered glass screenprotector with my OnePlus X and I'm really disappointed about it. I want to know if anyone else has the same issue.
There's still air all around the edges. Really regret peeling of the plastic protector that comes pre-installed .
Wanted to order a Orzly one but they pulled it out of the website( maybe the same problems??)
Noticed this on the Nillkin site: "Because the phone has posted under arc, film after about a slight white border, is normally" .....
Is there or will there be a better one, or has anyone good experience with this type of protectors on curved screens?
Here's a picture of the original protector installed
did you buy it from OP store?
Kéno40 said:
did you buy it from OP store?
Click to expand...
Click to collapse
Yes, already made a ticket at OP, but no response yet.
It looks like you didn't applied it well...
Kéno40 said:
It looks like you didn't applied it well...
Click to expand...
Click to collapse
It does look like that indeed. But it is perfectly aligned with the speaker and screen. Its not my first screen protector that i apply.. So I think it's not my fault..
I contacted Orzly today to ask if they are planning to release the Tempered Glass Protector for the OPX, as they where available a week ago as pre-order but not on the site anymore.
This was the answer I got:
"Unfortunately we are not planning to realised Tempered Glass Screen protector for the One Plus X. one plus x screen is too curved and we are not pleased with the fitting of the glass screen."
Seems like they have the same problem...
Is your glass 2.5D too (not talking about the screen of course )
Kéno40 said:
Is your glass 2.5D too (not talking about the screen of course )
Click to expand...
Click to collapse
No the original one isnt. But that doesnt has anything to do with the fitting to the screen.
I'm bought this one: https://oneplus.net/oneplus-x-tempered-glass-screen-protector
I ordered 2 of them, already have the phone so hope the shipping will not be too slow. I'll tell you when I get them.
fuske said:
I ordered the original temepered glass screenprotector with my OnePlus X and I'm really disappointed about it. I want to know if anyone else has the same issue.
There's still air all around the edges. Really regret peeling of the plastic protector that comes pre-installed .
Wanted to order a Orzly one but they pulled it out of the website( maybe the same problems??)
Noticed this on the Nillkin site: "Because the phone has posted under arc, film after about a slight white border, is normally" .....
Is there or will there be a better one, or has anyone good experience with this type of protectors on curved screens?
Here's a picture of the original protector installed
Click to expand...
Click to collapse
You better use film rather than tgsp with such curved screen.
My father has the same problem with Note4 - edges of tempered glass is not round but straight, and screen is slightly round on the edges. I also planed to buy glass protector for my OPX but now i see that is not so good idea. I better wait for some hard case and i will live that original screen protector and i wish you well, maybe there will be curved tempered glass for our phones... who knows...
I ordered a similar one off Ebay. The same happened to me. I'm pretty good at applying screen protectors. There is air all around the edges. I bought a similar one for my wifes S5 and that went on perfect you can't even tell it's on. I'm sticking with it as the glass ones have saved my skin on other phones more than once.
Sent from my ONE E1003 using XDA Free mobile app
cxm0429 said:
You better use film rather than tgsp with such curved screen.
Click to expand...
Click to collapse
For the looks maybe but a tgsp protects the screen much more!
I also ordered the NILLKIN, because I wasnt happy with the original one. I ordered the H + with rounded edges.
It was delivered today and was going to hesitate to go try this, eventually just went ahead and tried under the guise, "it can not be worse!"
I came to the conclusion that it was exactly the same size so probably had the same problem as the original.
And that was true, unfortunately, ...
So NILLKIN has the same problem as the original of OnePlus!
But!...
In contrast to the original is the NILLKIN H + rounded off at the edges so that feels better. Something also bothered me!
Conclusion, this is one better than the original! (Imho)
Someone on OP forums speaked about Sundatom Tempered Glass 9H 0.2mm 2.5D arc edge
One more to test....
2.5D means that only the edges of glass are rounded I don't think this cover whole screen (I hope I'm wrong)
Dizzyrul3z said:
2.5D means that only the edges of glass are rounded I don't think this cover whole screen (I hope I'm wrong)
Click to expand...
Click to collapse
Did you read what's in the image i posted :
"glass curved down the screen side"
This one pretend to be what i'm waiting for. Maybe I'll try it after a chinese tester confirm that.
do any one bought from ebay?? www.ebay.com/itm/Tempered-Glass-Thi...987978?hash=item3d08767cca:g:Rs0AAOSwYHxWQG~P
Kéno40 said:
Someone on OP forums speaked about Sundatom Tempered Glass 9H 0.2mm 2.5D arc edge
One more to test....
Click to expand...
Click to collapse
I ordered the one mentioned above to test. Its only a couple of dollar..
Kéno40 said:
Did you read what's in the image i posted :
"glass curved down the screen side"
This one pretend to be what i'm waiting for. Maybe I'll try it after a chinese tester confirm that.
Click to expand...
Click to collapse
Yes I read that but a few times I met with the auction description was not as same as the item that I got.
fuske said:
I ordered the one mentioned above to test. Its only a couple of dollar..
Click to expand...
Click to collapse
Can you add a link ? Couldn't find it on web.

Screen Protectors Hunt Again

Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Goronok said:
On the same hunt, the glass is definitely 2.5D. I wouldn't expect any full adhesive glass protectors to work without massive halo's.
Click to expand...
Click to collapse
nightmare isnt it ive had loads of phones lately and everyone has been rubbish id be happy with a good film protector along as its crystal clear but even them seem to have a snowy effect
the Girlfriends iphone 8 plus is the last decent protector ive seen
I’ve ordered
Beyeah??
Will give you an update once I get the phone! Got to wait until 5th April! ?
well just received my xz2 and tired these https://www.amazon.co.uk/Newzerol-D...7&sr=1-8&keywords=xperia+xz2+screen+protector
there okish nice and clear but dont fit too well and at the top and bottom the dont seem to be sticking all too well
anyone had any luck with any more?
thanks
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Zazzinho said:
I buy iVoler tempered glass from amazon ita, are warranty life...when will arrive i'll check the description
Edit: iVoler tempered glass for xz2 are very bad, halo in all 4 sides
Click to expand...
Click to collapse
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
brockyneo said:
I bought these
https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_QVp0Ab7M39G0D
Fitted nice and stuck quite well and no halo till you touch the display then hallo everywhere but they gradually disappear once left alone
God I hate the whole screen protector problems the gf has a iPhone 8 plus bought one went on full adhesive not problems looks crystal clear :crying:
Click to expand...
Click to collapse
1 hour ago i've seen the brotect airglass, how are this screen protector?
Edit: finally today it's arrived brotect airglass, first time i've buyed and it's arrived a back screen protector for s9+ in xz2 package (???), contact the support and they send me a new for free and it's arrived today...no halo, great brightness and very good oleophobic treatment
i think they all seems to be lying on us... they advertise it as a 3D or full cover edge to edge but when you get your hands on it you realize it only protects the LCD, like flat protector...
well, i like this by IMAK... it's a 3D and full edge to edge film rather than tempered glass... what i don't like about it is not glossy, but rather anti-glare which i hate.
check the link below if anyone is interested in buying it
https://www.ebay.com/itm/For-Sony-X...var=552691546263&_trksid=p2055119.m1438.l2649
I bought this one, fits edge to edge very well.
https://www.amazon.co.uk/dp/B07B3XGHDV/ref=cm_sw_r_em_apa_i_ZWe8AbT6KPEVK
brockyneo said:
Hi guys so the screen protector hunt starts again ive been looking on amazon uk and some of them seem to be a full adhesive fit does anyone know if the xz2 has flat glass near the main display or is it 2.5D like most models
hear is one ive been looking at https://www.amazon.co.uk/Protector-...6&sr=8-7&keywords=xperia+xz2+screen+protector
Click to expand...
Click to collapse
this should look amazing, also it does protects the sides....
take a look
https://www.ebay.com/itm/Xperia-XZ2...-Full-Coverage-3Pack-Clear-Flim-/302707711634
here is the perfect case that match it
https://www.ebay.com/itm/Sony-Xperi...&itm=601568981187&_trksid=p5411.c100167.m2940
Does plastic screen protector protects your phone from falls and prevents shattering like the glass ones?
I bought this one but was rubbish bad rainbow affect and started coming off withing a week https://www.amazon.co.uk/dp/B07BHLGSBT/ref=cm_sw_r_sms_apa_i_5VY8Ab1MD67AR
But bought this one https://www.amazon.co.uk/dp/B07BPRBRPT?ref=yo_pop_ma_swf
Works perfect crystal clear and stuck well at the edges been 2 weeks and still looks new and case friendly
AlvinZahran98 said:
Does plastic screen protectors protect your phone from fall and prevents shattering like the glass ones?
Click to expand...
Click to collapse
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
MartinX3 said:
It prevents glass breaking by 30%.
Or was it 70%?
But it definitely strengths the glass structure.
Click to expand...
Click to collapse
So it is safe to use, as safe as when I use a glass screen protector?
AlvinZahran98 said:
So it is safe to use, as safe as when I use a glass screen protector?
Click to expand...
Click to collapse
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
MartinX3 said:
I prefer a thick glass screen protector.
It will easily avoid bubbles and is way stronger.
Click to expand...
Click to collapse
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
AlvinZahran98 said:
Okay, I always use a glass screen protector too. But, it is a nightmare to find a good glass screen protectors for this phone.
Click to expand...
Click to collapse
I use this one.
I hope you like it.
https://www.wigento.de/smartphone/s...sony-xperia-xz2-schutz-huelle-neu/a-42519990/
I recommend this:
https://www.gadgetshieldz.com/sony-xperia-xz2-screen-protectors-cases-covers-skins.html
Fits perfectly and the smoothness is like glass!
Dont buy this particular type of glass on aliexpress (this is my first bad buy here, others that i ordered for diferent models were worth it) it seems to be problem with this one... i have bad connection in middle of screen 3 cm vertikal (no air bubble, just pad materials on protective glass
https://www.dropbox.com/s/yxu55ssg7vig4xi/Screenshot_20180618-075151.png?dl=0

Screen protectors for the outside screen?

I think I've only seen one of them on Amazon so far (this one). It looks like it might be fine - but I'm not sure $36 is where I want to be. I'm hoping we'll see some more options pop up soon.
Anyone seen anything else yet?
I'm really thinking I want something on there considering that the Flex Mode will basically be resting on the screen side whenever you use it (or you'd get a wobble on the cameras).
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.
So I’m assuming the stock screen protector has to be removed for the Whitestone?
The outside screen protector is no problem. It's the inner one they caution against removing.
StormCell said:
The outside screen protector is no problem. It's the inner one they caution against removing.
Click to expand...
Click to collapse
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.
That video is pretty intense.
I see Verizon has a screen protector. I hope a better quality one becomes available.
lynseyw said:
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.
Click to expand...
Click to collapse
If it has a factory installed protector on it, leave it on until it wears out. They provide better protection than you might first think.
Ha-ha I "tested" the one on my 10+ the 2and day I had it and faceplanted it on a rough piece of 1/16th inch aluminum angled upwards.
Marred the protector but no damage to the screen... it hit on the curved glass area, hard.
Sand will scratch these screens.
I would lean towards a wet apply urethane screen protector as they are durable, remain clear, fairly easy to apply, bubble free, self healing and are inexpensive.
Been having a good run with Gorilla IQ Sheild on my 10+. Bought 4 three months ago and still on the first one. Shows some wear on the keypad area but no scratches and I'm not babying it. Similar in feel to the factory installed protector.
ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?
lynseyw said:
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.
Click to expand...
Click to collapse
The screen protector is for the outer screen, you dont need a protector for inside screen. Whitestone is a good company, sadly the code did not work for me. Did anyone get lucky yet?
mmafighter077 said:
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?
Click to expand...
Click to collapse
Sorry just saw your question. Yes the z Fold 2 has one side of the front screen slightly curved. The side that opens to be specific.
Whitestone code no longer works. As soon as people started using it they yanked it.
Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
StormCell said:
Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Its great.. need to get a front cover thouvh..
blkghost22 said:
Its great.. need to get a front cover thouvh..
Click to expand...
Click to collapse
Still need a cover with the screen protector?
StormCell said:
Still need a cover with the screen protector?
Click to expand...
Click to collapse
Because of the edges of the glass. I can feel the edges when playing games
Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.
CP Conductor said:
Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.
Click to expand...
Click to collapse
Mines on the way. Pic, please
Does anyone know if any of the screen protectors on this link are actually glass, and if they are any good ? Thanks.
protectionfilms24.com/c/tempered-glass-screen-protectors/samsung-galaxy-z-fold-2/

Screen protector

Hi,
can someone suggest me a screen protector for xperia 5 II that covers the whole display?
I read a lot of reviews about screen protectors that are smaller than the screen due to the curved edges.
Actually I have a Spigen that covers the whole screen, but I want to try a new one.
Thanks in advance
The one i have covers the full screen but the touch sensitivity at the sides are bad. Looking for recommendations for full screen that does not affect the side sensitivity.
viperc said:
The one i have covers the full screen but the touch sensitivity at the sides are bad. Looking for recommendations for full screen that does not affect the side sensitivity.
Click to expand...
Click to collapse
I use one made by polish company, its also not a glass one so you might not fancy it, but it has some cool stuff to it, like self regeneration(it kinda does that), 99% germ cancelling(confirmed by some polish government company, and tested by some european one with certificates) its sleek and doesnt change colors nor does it interfere with touch, the protector is 3mk SilverProtection+ im darn happy with it, but it might be hard to get outside Poland, although still worth a try. I also use spigen clear armor case
MasterDomino said:
I use one made by polish company, its also not a glass one so you might not fancy it, but it has some cool stuff to it, like self regeneration(it kinda does that), 99% germ cancelling(confirmed by some polish government company, and tested by some european one with certificates) its sleek and doesnt change colors nor does it interfere with touch, the protector is 3mk SilverProtection+ im darn happy with it, but it might be hard to get outside Poland, although still worth a try. I also use spigen clear armor case
Click to expand...
Click to collapse
Thanks. I will prefer glass type screen protector still. I have used something similar in the past from phantom skinz.
I'm using the Gorilla IQ Sheild on my Note 10+ which has a curved screen. It's an inexpensive fairly easy wet apply urethane that's very durable. This one has been on for about 8 months... that amazes me. Zero issues.
Unfortunately I don't think one is available yet for your model... I may be wrong.
Sony Phones
Sony Phones - IQ Shield protectors offer unmatched protection against scratches, dirt, dust and wear damage for your Sony Phone. IQ Shield screen protectors and full body skin protectors are accurately designed so that they can perfectly cover the vital areas of your Sony Phone that require...
www.iqshield.com
Make sure you use a case that protects against faceplants and corner hits. I've been using the Zizo Bolt for over a year. No damage in spite of at least 6 drops on concrete.
baronebirra said:
Hi,
can someone suggest me a screen protector for xperia 5 II that covers the whole display?
I read a lot of reviews about screen protectors that are smaller than the screen due to the curved edges.
Actually I have a Spigen that covers the whole screen, but I want to try a new one.
Thanks in advance
Click to expand...
Click to collapse
I got this from amazon japan
Amazon.co.jp: iPhone se2 Glass Film, Blue Light, iPhone 2nd Generation Protective Film, iPhone SE2 Film, Tempered Glass, Anti-Fingerprint, No Bubbles, No Interference, Easy to Install, 9H : Electronics
Amazon.co.jp: iPhone se2 Glass Film, Blue Light, iPhone 2nd Generation Protective Film, iPhone SE2 Film, Tempered Glass, Anti-Fingerprint, No Bubbles, No Interference, Easy to Install, 9H : Electronics
www.amazon.co.jp
I got the Supershieldz Glass cover through Amazon. I've been using it for four days and it's amazing. I've had to wipe the screen once in four days. I have a camera case, of course, and I can't feel a gap between the case and the cover but if I slip a fingernail in I can find a small gap.
141ptkelly said:
I got the Supershieldz Glass cover through Amazon. I've been using it for four days and it's amazing. I've had to wipe the screen once in four days. I have a camera case, of course, and I can't feel a gap between the case and the cover but if I slip a fingernail in I can find a small gap.
Click to expand...
Click to collapse
How's the side sensitivity with the screen protector? Still trying to find one that doesn't affect the side sensitivity.
It seems to be working fine. I can swipe to go back to the previous screen.
Hi,
I had recently bought this phone and currently looking for a film protector for the screen. Which one do you suggest?
Thanks in advance.
steffanos said:
Hi,
I had recently bought this phone and currently looking for a film protector for the screen. Which one do you suggest?
Thanks in advance.
Click to expand...
Click to collapse
See my above post. Wet apply is the best way to go. My current one is over 8 months old.
Little wear for the amount of use it's seen.
When I get around to it I'll slam a new one on... at $5 a pop.
I've found it on their website. Though there are 2 variants:
-LIQuid Shield™ Sony Xperia 5 II Screen Protector
-IQ Shield Matte™ Sony Xperia 5 II Screen Protector
Do you use regular one or matte?
steffanos said:
I've found it on their website. Though there are 2 variants:
-LIQuid Shield™ Sony Xperia 5 II Screen Protector
-IQ Shield Matte™ Sony Xperia 5 II Screen Protector
Do you use regular one or matte
Click to expand...
Click to collapse
I've never used the matte finish.
I have a Note 10+ with the curved screen and it works well. It should be no problem at all with a flat screen. Pay attention to letting it adhere properly at first. I waited about 6 hours but it was hot.
(2-Pack) LiQuid Shield - Sony Xperia 5 II Screen Protector
(2-Pack) LiQuid Shield - Sony Xperia 5 II Screen Protector - We are constantly coming up with new ways to keep our electronic devices protected. While our IQ Shield is designed specifically for flat screen surfaces, we’ve also engineered a film that is able to completely cover your entire Sony...
www.iqshield.com
Because for matte they state it's anti-glare and better generally with fingerprint marks (not visible).
Thanks for the help. If the rest have something else, be free to recommend.
steffanos said:
Because for matte they state it's anti-glare and better generally with fingerprint marks (not visible).
Thanks for the help. If the rest have something else, be free to recommend.
Click to expand...
Click to collapse
You simply wipe it occasionally with a dry microfiber cloth; fingerprints aren't an issue.
viperc said:
How's the side sensitivity with the screen protector? Still trying to find one that doesn't affect the side sensitivity.
Click to expand...
Click to collapse
I haven't noticed a problem but I normally don't have it turned on.
AOLANDER för Sony Xperia 5 II 2020 skärmskydd härdat glas, 9H hårdhet HD premium filmskydd【3 PACK】 : Amazon.se: Elektronik
AOLANDER för Sony Xperia 5 II 2020 skärmskydd härdat glas, 9H hårdhet HD premium filmskydd【3 PACK】 : Amazon.se: Elektronik
www.amazon.se
Good value, seem to do its job.
Covers the flat part of the screen there is a a gap - as expected.
If you do not fit it perfectly, there may be a part that is not glued to the screen.
Quality seem good, maybe a little sharp edges.
I got what I expected, it may not be what you want though.
The fullscreen protectors are hard to fit and come off more easily. Some cases are hard to use with fullscreen protectors too (and I take off the case often).
The protector in combination with a Caseology Vault makes it harder to side sweep and to use side sense. Sensitivity for side sweep should be set to highest. I am not happy with this.

Categories

Resources