I will receive my galaxy nexus few hours later and plan to unlock my phone. Is there a way to hide the unlock logo after I unlock the bootloader or Can I unlock the bootloader, then root the phone and relock the bootloader after to clear the logo but still get the root access. If yes, then how to relock the bootloader?
fastboot oem lock will re-lock the bootloader
But will I still get the root access of my phone after I relock the bootloader and will the unlock logo disappear when boot up after I relock the bootloader?
p.s. It is retail version
why do you need it locked?
I don't like the unlock logo at bootup and the warranty detail only state that I will lost the warranty if I unlock the bootloader, so relock it in case I need warranty, it may cheat them
so then you relock it if you need to. Development for this phone is very young right now so you'll likely be doing alot of flashing. I flash different rom/kernel combinations probably 3-5 times a day with how often things are updating right now. Besides the little unlock symbol is pretty awesome
I know the development is young, that's why I post this. I just need to confirm
1) Is it possible to relock the bootloader in retail version
2) Will the unlock logo disappear after relock
3) Will the phone can still get the root access after relock the bootloader
Thx very much and please reply me if anyone know!!
punalex said:
I know the development is young, that's why I post this. I just need to confirm
1) Is it possible to relock the bootloader in retail version
2) Will the unlock logo disappear after relock
3) Will the phone can still get the root access after relock the bootloader
Thx very much and please reply me if anyone know!!
Click to expand...
Click to collapse
1) Yes, "fastboot oem lock"
2) Yes
3) Yes, while "fastboot oem lock" does not touch any of your data, "fastboot oem unlock WILL delete all your data. None of these processes can remove root access, the only way to remove it is to reflash the system partition, either by flashing it manually or through an OTA update.
Thx Thx Thx Thx very much
So, long story short I recently decided to try and root my oneplus7t I unfortunately made some mistakes and somehow corrupted some files. I read elsewhere in the forum that I could download the stock rom which I did and then use flash-all and that would allow me to go back to the factory settings so I could lock the oem and just go back to normal because I was tired of the headache. Unfortunately, after using flash-all I locked the oem thinking everything should be stock and it would work properly. But it says device is corrupt and trying to unlock the oem says oem unlocking is disabled.
So did I just completely brick my phone? I don't know of anyway to fix it at this point :/.
kschmitz4 said:
So, long story short I recently decided to try and root my oneplus7t I unfortunately made some mistakes and somehow corrupted some files. I read elsewhere in the forum that I could download the stock rom which I did and then use flash-all and that would allow me to go back to the factory settings so I could lock the oem and just go back to normal because I was tired of the headache. Unfortunately, after using flash-all I locked the oem thinking everything should be stock and it would work properly. But it says device is corrupt and trying to unlock the oem says oem unlocking is disabled.
So did I just completely brick my phone? I don't know of anyway to fix it at this point :/.
Click to expand...
Click to collapse
Can you still boot into bootloader via the hardware keys, whatever that combo is on the 7t?
Boot to bootloader or recovery and factory reset it or so.
Josh McGrath said:
Can you still boot into bootloader via the hardware keys, whatever that combo is on the 7t?
Boot to bootloader or recovery and factory reset it or so.
Click to expand...
Click to collapse
I can get to the bootloader but it's Device State -locked and when I tell it to boot into recovery it says the device is corrupt. When I use fastboot to oem unlock it says I cannot, and I can't flash when oem is locked either.
kschmitz4 said:
I can get to the bootloader but it's Device State -locked and when I tell it to boot into recovery it says the device is corrupt. When I use fastboot to oem unlock it says I cannot, and I can't flash when oem is locked either.
Click to expand...
Click to collapse
Try
fastboot erase userdata and
Fastboot erase cache
Let me know if that works or not we will move on. Probably won't work since it's bootloader locked
You may have to contact OP and while you're at it, get the MSM tool for us all :good:
It says erase is not allowed in locked state . I think this is probably all she wrote for this one. I think I'm just going to send it back tbh, the whole reason I was trying to root it was because it didn't work with Sprint like they said it would. and I was wondering if I could find a way too make it work with custom software. Thanks for trying
Are you able to flash one of these Fastboot ROMs?
Maybe Sideload can work!
https://support.oneplus.com/app/answers/detail/a_id/4583/kw/7t here is official stock file.
https://forums.oneplus.com/threads/how-to-do-flash-through-adb-sideload.509377/
https://www.the***********.com/sideload-ota-update-stock-recovery-adb/
Please refer above links for your knowledge purpose maybe it can help.....
I unfortunately no longer have Twrp installed as I did a flash-all with a stock rom already . If I try and flash recovery it says "flashing is not alllowed in lock state". Sideloading wasn't functional back when I had twrp either as the functionality for it is still in progress. I'll probably try contacting support one more time and see if I can get a T2 who can unbrick it, otherwise I'm just going to send it back. Thanks for the attempts guys!
Edit: As to the flashboot roms I flash-all'ed one of them and that's how I got into this mess :/.
kschmitz4 said:
I unfortunately no longer have Twrp installed as I did a flash-all with a stock rom already . If I try and flash recovery it says "flashing is not alllowed in lock state". Sideloading wasn't functional back when I had twrp either as the functionality for it is still in progress. I'll probably try contacting support one more time and see if I can get a T2 who can unbrick it, otherwise I'm just going to send it back. Thanks for the attempts guys!
Edit: As to the flashboot roms I flash-all'ed one of them and that's how I got into this mess :/.
Click to expand...
Click to collapse
I ended up needing to flash the fastboot 10.0.3 firmware and was able to do a local upgrade to 10.0.4 that way, then flashing a patched boot.img via fastboot
I can't run any flash commands as my oem is locked. I don't suppose there's anyway around that?
kschmitz4 said:
I can't run any flash commands as my oem is locked. I don't suppose there's anyway around that?
Click to expand...
Click to collapse
How did you flash twrp with it oem locked??That doesnt make sense
I had twrp on it when the oem was unlocked, I was trying to reset the device to stock, so I did a flash-all and then oem locked it. But for some reason the repair was unsuccessful, and now it says my device is corrupted and I forgot to turn on oem unlocking in the settings on my phone after the flash-all before I did the oem-lock.
kschmitz4 said:
I had twrp on it when the oem was unlocked, I was trying to reset the device to stock, so I did a flash-all and then oem locked it. But for some reason the repair was unsuccessful, and now it says my device is corrupted and I forgot to turn on oem unlocking in the settings on my phone after the flash-all before I did the oem-lock.
Click to expand...
Click to collapse
You should have no issues reflashing the stock images
I cannot flash anything. Because my OEM state is locked.
Boot to Stock Recovery ?
Holding for a long time Volume Down + Power Buttons while booting your phone ?
Volume down plus power button takes me to "Your device is corrupt and will not boot"
kschmitz4 said:
Volume down plus power button takes me to "Your device is corrupt and will not boot"
Click to expand...
Click to collapse
Looks like you will need the MSM tool to fix this issue. You'll have to contact OP support and they will remote in your PC, load their software and flash it 100pct back to stock.
Also, disconnect them before they can delete the MSM tool so we can have it here in the community
kschmitz4 said:
Volume down plus power button takes me to "Your device is corrupt and will not boot"
Click to expand...
Click to collapse
Press volume up/down and power, reboot to fastboot. Unlock bootloader again. Install update from settings, reboot and install it again. (local install)
Factory reset in setting, reboot fastboot, lock bootloader. Reboot and untick unlock bootloader in developer settings.
Don't know if it's too late but I believe there's a working MSM tool now
Hello, i unlocked the bootloader of my motorola one action. And i installed lineage 18.1 official, but i want to lock the bootloader again. i tried locking the bootloader using this help thread https://forum.xda-developers.com/t/...-2019-ask-any-question-noob-friendly.4010875/ but it din't work. Can somewone help me?
raphaelgamer981 said:
Hello, i unlocked the bootloader of my motorola one action. And i installed lineage 18.1 official, but i want to lock the bootloader again. i tried locking the bootloader using this help thread https://forum.xda-developers.com/t/...-2019-ask-any-question-noob-friendly.4010875/ but it din't work. Can somewone help me?
Click to expand...
Click to collapse
NEVER lock a phone with custom firmware installed. This usually leads to bootloops.
georg3_ said:
NEVER lock a phone with custom firmware installed. This usually leads to bootloops.
Click to expand...
Click to collapse
No, I Didn't try to lock the bootloader with a custom firmware.
raphaelgamer981 said:
No, I Didn't try to lock the bootloader with a custom firmware.
Click to expand...
Click to collapse
What are the steps you took before relocking the bootloader?
In my experience, relocking the bootloader should be the last thing you do, after you've got a working/bootable stock ROM.
arsradu said:
What are the steps you took before relocking the bootloader? In my experience, relocking the bootloader should be the last thing you do, after you've got a working/bootable stock ROM.
Click to expand...
Click to collapse
So, after i installed the latest stock rom, the device worked normally, but after waiting a while for the oem lock option appear in development options, it din´t show up. so i just gave up and installed lineage 19.1 but if i can i want to lock the bootloader again.
Raphael, I think you might have quoted my post twice, but didn't add an actual answer. Or maybe I'm super blind and I can't see it.
arsradu said:
Raphael, I think you might have quoted my post twice, but didn't add an actual answer. Or maybe I'm super blind and I can't see it.
Click to expand...
Click to collapse
ohh sorry, i tried replying to your post in my ipad 3 and it din´t show up any caracters.
raphaelgamer981 said:
So, after i installed the latest stock rom, the device worked normally, but after waiting a while for the oem lock option appear in development options, it din´t show up. so i just gave up and installed lineage 19.1 but if i can i want to lock the bootloader again.
Click to expand...
Click to collapse
So, the OEM lock/unlock thing comes with a pretty big caveat, and you need to be aware of it: loss of data.
Every time you lock or unlock your bootloader, a wipe data is triggered.
Now, for as far as I know, to lock the bootloader, you need two things:
1. Stock ROM. Don't do this on a custom ROM!
2. following command, in Terminal/Cmd Prompt
fastboot oem lock
Of course, you need to be in fastboot mode, so if you're not, and if you're booted and connected via USB (USB debugging needs to be ON and RSA fingerprinting accepted), do:
adb devices
It should display your device here. This is just to make sure ADB is working properly.
adb reboot bootloader
At this point, the phone should reboot into bootloader, so now you can do the lock command
fastboot oem lock
Data should be erased and, in case it doesn't automatically boot up, you can reboot the phone.
Don't worry about the OEM unlocking option in Developer Options. You just make sure the stock ROM is functional before attempting to relock the bootloader.
arsradu said:
So, the OEM lock/unlock thing comes with a pretty big caveat, and you need to be aware of it: loss of data.
Every time you lock or unlock your bootloader, a wipe data is triggered.
Now, for as far as I know, to lock the bootloader, you need two things:
1. Stock ROM. Don't do this on a custom ROM!
2. following command, in Terminal/Cmd Prompt
fastboot oem lock
Of course, you need to be in fastboot mode, so if you're not, and if you're booted and connected via USB (USB debugging needs to be ON and RSA fingerprinting accepted), do:
adb devices
It should display your device here. This is just to make sure ADB is working properly.
adb reboot bootloader
At this point, the phone should reboot into bootloader, so now you can do the lock command
fastboot oem lock
Data should be erased and, in case it doesn't automatically boot up, you can reboot the phone.
Don't worry about the OEM unlocking option in Developer Options. You just make sure the stock ROM is functional before attempting to relock the bootloader.
Click to expand...
Click to collapse
I tried that, and it din´t work, this method is the same that was in a help thread in xda forum of my device, this command works fine in my nexus 6, but on my moto one action it does not, i unlocked my bootloader via the normal method using motorola´s website, not using another method.
raphaelgamer981 said:
I tried that, and it din´t work, this method is the same that was in a help thread in xda forum of my device, this command works fine in my nexus 6, but on my moto one action it does not, i unlocked my bootloader via the normal method using motorola´s website, not using another method.
Click to expand...
Click to collapse
raphaelgamer981 said:
I tried that, and it din´t work, this method is the same that was in a help thread in xda forum of my device, this command works fine in my nexus 6, but on my moto one action it does not, i unlocked my bootloader via the normal method using motorola´s website, not using another method.
Click to expand...
Click to collapse
But why do you say it didn't work? Do you get an error at any point during the process?
arsradu said:
But why do you say it didn't work? Do you get an error at any point during the process?
Click to expand...
Click to collapse
no, i run the command and it asks for changing the oem lock setting in developer options, i reboot the phone and run through the setup process. Then when i enable developer options and check the oem lock option, it is greyed out.
Is it greyed out in the on or off position? Can you attach a screenshot? I don't remember the operations sequence... But I think the option was automatically switched back to the original position (off) when you lock the bootloader. I could be wrong though. So...when you run the "fastboot oem lock" command, it asks you to....what?
Set the option to on or off? Some screenshots from both the PC, with the message, and the developer options might help to clarify this.
arsradu said:
Is it greyed out in the on or off position? Can you attach a screenshot? I don't remember the operations sequence... But I think the option was automatically switched back to the original position (off) when you lock the bootloader. I could be wrong though. So...when you run the "fastboot oem lock" command, it asks you to....what?
Set the option to on or off? Some screenshots from both the PC, with the message, and the developer options might help to clarify this.
Click to expand...
Click to collapse
it is greyed in the on position, i can´t add a screenshot because i am in lineage 19.1 with root and the option shows up,when i run the command in cmd, it says to me to check the oem lock option in developer options
raphaelgamer981 said:
it is greyed in the on position, i can´t add a screenshot because i am in lineage 19.1 with root and the option shows up,when i run the command in cmd, it says to me to check the oem lock option in developer options
Click to expand...
Click to collapse
A screenshot would be really useful. But don't worry about it. When you're back to stock rom and ready to lock your bootloader, we can resume this then. I think either we're missing something, or it's everything ok, and you just need to switch that option off. Though, I remember I didn't have to do it manually. But I could be wrong though.
So, don't worry. Enjoy LineageOS and we can resume this when you're back to stock ROM and ready to lock.
arsradu said:
A screenshot would be really useful. But don't worry about it. When you're back to stock rom and ready to lock your bootloader, we can resume this then. I think either we're missing something, or it's everything ok, and you just need to switch that option off. Though, I remember I didn't have to do it manually. But I could be wrong though.
So, don't worry. Enjoy LineageOS and we can resume this when you're back to stock ROM and ready to lock.
Click to expand...
Click to collapse
ok thanks for your help!
arsradu said:
A screenshot would be really useful. But don't worry about it. When you're back to stock rom and ready to lock your bootloader, we can resume this then. I think either we're missing something, or it's everything ok, and you just need to switch that option off. Though, I remember I didn't have to do it manually. But I could be wrong though.
So, don't worry. Enjoy LineageOS and we can resume this when you're back to stock ROM and ready to lock.
Click to expand...
Click to collapse
hello, so i want to lock the bootloader again, how do i install the stock rom back?
arsradu said:
A screenshot would be really useful. But don't worry about it. When you're back to stock rom and ready to lock your bootloader, we can resume this then. I think either we're missing something, or it's everything ok, and you just need to switch that option off. Though, I remember I didn't have to do it manually. But I could be wrong though.
So, don't worry. Enjoy LineageOS and we can resume this when you're back to stock ROM and ready to lock.
Click to expand...
Click to collapse
so after running the fastboot oem lock command, it asked this in the cmd
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot oem lock
...
(bootloader) Check 'Allow OEM Unlock' in Android Settings > Developer
(bootloader) Options
OKAY [ 0.080s]
finished. total time: 0.080s
when i rebooted the phone, it showed the screen saying that the bootloader was unlocked. also i had to re run the command because it was going to erase my phone but that din´t happend, after going to developer options the option was still greyed out.
The last 3 days i've tried some roms from here.first i've unlocked the bootloader in developer menu,then from fastboot with the unlock key provided by motorola website,i've tried different rom,didnt like that i cannot use bank apps.so i went for locking.full reset,adb enable,reboot bootloader,full flash stock rom (last one from Motorola),reboot to check,adb enable, reboot bootloader,run command " fastboot oem lock " once ,it asked for confirmation due to data loss,then run command " fastboot oem lock " once more,then reboot to os.everything went ok,device dont show that was unlocked
I just android 14 beta I was on a developer preview. I've been trying to flash back to normal to lock my boot loader but I get a weird screen that lets me know my boot loaders unlocks and I could never lock the bootloader again because I never had an option to by updating it to the beta. Can I lock the bootloader now??
You can use flashtool to downgrade to a public release. Simply check the box's force flash partitions, wipe and lock bootloader
Android Flash Tool
flash.android.com
fil3s said:
You can use flashtool to downgrade to a public release. Simply check the box's force flash partitions, wipe and lock bootloader
Android Flash Tool
flash.android.com
Click to expand...
Click to collapse
So that's the I've used the Android flash tool but after it's done downloading and doing whatever it does it doesn't lock the bootloader I get the screen where it tells you that your bootloader is unlocked with the little code that you going to look and it takes you to the Google page and tells you what it is. There's no option to lock it so I've been trying to figure out how to lock the bootloader back. I don't have a computer. I have a Chromebook so I can you know manually do the ABD or whatever it's called to do it through the command prompt.
amazin1988 said:
So that's the I've used the Android flash tool but after it's done downloading and doing whatever it does it doesn't lock the bootloader I get the screen where it tells you that your bootloader is unlocked with the little code that you going to look and it takes you to the Google page and tells you what it is. There's no option to lock it so I've been trying to figure out how to lock the bootloader back. I don't have a computer. I have a Chromebook so I can you know manually do the ABD or whatever it's called to do it through the command prompt.
Click to expand...
Click to collapse
Use adb reboot bootloader then type in terminal
Code:
fastboot flashing lock
More info
amazin1988 said:
I just android 14 beta I was on a developer preview. I've been trying to flash back to normal to lock my boot loader but I get a weird screen that lets me know my boot loaders unlocks and I could never lock the bootloader again because I never had an option to by updating it to the beta. Can I lock the bootloader now??
Click to expand...
Click to collapse
Yes, you can attempt to lock the bootloader on your Android device. To get more information about anything you can visit howwmuch.net .To do so, you will need to go through the following steps:
Ensure your device is connected to your computer via USB.
Open a command prompt or terminal window on your computer.
Enter the command "fastboot oem lock" to initiate the bootloader locking process.
Follow the on-screen instructions, if any, to confirm the bootloader locking.
Please note that locking the bootloader may vary depending on the device model and manufacturer. It's essential to refer to the specific instructions provided by the manufacturer or seek assistance from their support channels to ensure you follow the correct procedure for your device.