Hello,
i know that Redstone won´t work on that device, but i have been told that some previouse versions of Windows 10 mobile worked on it. Can you please give me some advice on how i can get a compatible version ?
Windows Insider App is already installed and i joined the fast ring. However, no updates are shown if i try to update in settings.....
Please help!
Regards,
impact 79
impact79 said:
Hello,
i know that Redstone won´t work on that device, but i have been told that some previouse versions of Windows 10 mobile worked on it. Can you please give me some advice on how i can get a compatible version ?
Windows Insider App is already installed and i joined the fast ring. However, no updates are shown if i try to update in settings.....
Please help!
Regards,
impact 79
Click to expand...
Click to collapse
At this time there's no way longer presents for your phone .
you have to wait for Boot Loader unlock . by the latest news you should heard about it (Microsoft accidently published their secure boot golden key) it must no longer takes to the hack release then you can use upgrade advisor and registry hack to upgrade to TH2 (10586 build of windows 10)
The link contains cabs download link for updating from latest wp8.1 to windows 10 mobile 10586.107. For Lumia 630 (RM-978) .
Using iutool to push cab files to the phone .Then check update for 10586 in settings.
Waitting for RS on L630 too...
fishersfish said:
The link contains cabs download link for updating from latest wp8.1 to windows 10 mobile 10586.107. For Lumia 630 (RM-978) .
Using iutool to push cab files to the phone .Then check update for 10586 in settings.
Waitting for RS on L630 too...
Click to expand...
Click to collapse
Is there a link for .cab files of RM-976?
BlueTR said:
Is there a link for .cab files of RM-976?
Click to expand...
Click to collapse
Sorry, I don't have one. I only captured the update links for myself before.
fishersfish said:
Sorry, I don't have one. I only captured the update links for myself before.
Click to expand...
Click to collapse
Will it brick my device if i try the RM-978 files on my RM-976 ?
impact79 said:
Will it brick my device if i try the RM-978 files on my RM-976 ?
Click to expand...
Click to collapse
I am just a guy who like flashing roms. I am not sure, it may not. ( Mine is a Dual-SIM module ,yours is of single SIM )
Just tried to flash those files on my RM-976. Unfortunately the update stops with ERROR 0x800b0100.
Seems that the windows security .dll files are not properly registered.
Do i have to unlock the phone or something else before trying to flash ?
impact79 said:
Just tried to flash those files on my RM-976. Unfortunately the update stops with ERROR 0x800b0100.
Seems that the windows security .dll files are not properly registered.
Click to expand...
Click to collapse
iutool doesn't need anything else to be done before pulling update files to the phone
Iutool Error Codes
https://msdn.microsoft.com/en-us/library/windows/hardware/mt131833(v=vs.85).aspx
"TRUST_E_NOSIGNATURE" means what? Maybe someone knows it.
I am getting 0x801882c1 error code while installing updates any idea about this? Error code specifies 0x801882C1 E_CABAPI_NOT_CABINET BTS_E_PER_APP_REQUEST_LIMIT_REACHED not really sure what that means. Downloaded all files twice and tried.
---------- Post added at 09:25 PM ---------- Previous post was at 09:04 PM ----------
KillerTheLord said:
I am getting 0x801882c1 error code while installing updates any idea about this? Error code specifies 0x801882C1 E_CABAPI_NOT_CABINET BTS_E_PER_APP_REQUEST_LIMIT_REACHED not really sure what that means. Downloaded all files twice and tried.
Click to expand...
Click to collapse
Solved this by deleting extra Desktop.ini file. How getting same error as above 0x800b0100.
Readstone can be run on Lumia 630 (512MB RAM) ! The update packages( cab files) can be downloaded from catalog.update.microsoft.com ( search your phone carrier name, like mine: 000-HK ), queue by time ,add 14343 to bucket and download .( other items for 10586 and erlier version; there SHOULD HAVE the links for upgrading from wp8.1 to 10586.107 ). If you can not click to download , view the poped-up webpage's source then copy and sort the download links by yourself.
You only need to download the files similar to the files you grabbed when updating 10586.107 to 10586.545. OR similar to the files in my attachment. It seems that difference to OS language packages can be ignored.
*.cbs_*.cab files are for FULL update, maybe they can be used on 10586.545 ; *.cbsu_*.cab files must can be used on 10586.545. They CANNOT be used at the same time, I update failed once due to this.
Replace IME and Speech data packages with yours.
Use iutool.exe to push cab files to your phone as usual.
If you update failed and your downloaded files are not broken, try to replace thoes files which their name start with or like:
microsoft.devicelayout_qc8x26_16k.mainos.cbs_
microsoft.soc_qc8x26_16k.mainos.cbs_
for other defination, replace this file: microsoft.prerelease_protected.mainos_res_480x800.cbs_*.cab .I am not sure if it can be used on Lumia 630.
Here is my screenshot: SO.....SO exciting!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@fishersfish:
sounds great, thanks for sharing!
However, i don´t understand completely yet. I have Win Phone 8.1 Update (8.10.14234.375) on my Lumia 630 (Carrier 000-DE).
Which files do i have to download ?
fishersfish said:
Readstone can be run on Lumia 630 (512MB RAM) ! The update packages( cab files) can be downloaded from catalog.update.microsoft.com ( search your phone carrier name, like mine: 000-HK ), queue by time ,add 14343 to bucket and download .( other items for 10586 and erlier version; there SHOULD HAVE the links for upgrading from wp8.1 to 10586.107 ). If you can not click to download , view the poped-up webpage's source then copy and sort the download links by yourself.
You only need to download the files similar to the files you grabbed when updating 10586.107 to 10586.545. OR similar to the files in my attachment. It seems that difference to OS language packages can be ignored.
*.cbs_*.cab files are for FULL update, maybe they can be used on 10586.545 ; *.cbsu_*.cab files must can be used on 10586.545. They CANNOT be used at the same time, I update failed once due to this.
Replace IME and Speech data packages with yours.
Use iutool.exe to push cab files to your phone as usual.
If you update failed and your downloaded files are not broken, try to replace thoes files which their name start with or like:
microsoft.devicelayout_qc8x26_16k.mainos.cbs_
microsoft.soc_qc8x26_16k.mainos.cbs_
for other defination, replace this file: microsoft.prerelease_protected.mainos_res_480x800.cbs_*.cab .I am not sure if it can be used on Lumia 630.
Here is my screenshot: SO.....SO exciting!!!
View attachment 3844880
Click to expand...
Click to collapse
impact79 said:
@fishersfish:
sounds great, thanks for sharing!
However, i don´t understand completely yet. I have Win Phone 8.1 Update (8.10.14234.375) on my Lumia 630 (Carrier 000-DE).
Which files do i have to download ?
Click to expand...
Click to collapse
Sorry, I didn't find either(Maybe I am just too excited ). But there must be a way! A guy from my country ( China ) just capture a lot of update cabs ( from wp8.1 to w10m ) this month. But not include your phone. He must used an other way.
Here is the guy:
http://bbs.wfun.com/home.php?mod=space&uid=1183465
http://weibo.com/u/1144511064
fishersfish said:
Sorry, I didn't find either(Maybe I am just too excited ). But there must be a way! A guy from my country ( China ) just capture a lot of update cabs ( from wp8.1 to w10m ) this month. But not include your phone. He must used an other way.
Here is the guy:
http://bbs.wfun.com/home.php?mod=space&uid=1183465
http://weibo.com/u/1144511064
Click to expand...
Click to collapse
Hi. Do you still have the Build 10586 for Lumia 630 dual sim 512 ram ?please upload this for me so I can flash it on my phone using WP Internal.please I really need it.
ngame said:
At this time there's no way longer presents for your phone .
you have to wait for Boot Loader unlock . by the latest news you should heard about it (Microsoft accidently published their secure boot golden key) it must no longer takes to the hack release then you can use upgrade advisor and registry hack to upgrade to TH2 (10586 build of windows 10)
Click to expand...
Click to collapse
I have downloaded the cab files and but iutool give me error no update files found
mirasal2 said:
I have downloaded the cab files and but iutool give me error no update files found
Click to expand...
Click to collapse
Seems it's command issue .
iutool -v -p C:\Update\*
this is the exact command for when you put update files in c:\Update folder , Do not forget \* it means install anything presents in this path .
ngame said:
Seems it's command issue .
iutool -v -p C:\Update\*
this is the exact command for when you put update files in c:\Update folder , Do not forget \* it means install anything presents in this path .
Click to expand...
Click to collapse
I'm sorry to tell you it didn't work.
Do I have to extract cab files?
Which version from iutool should use,mine is seems like 2014 version
mirasal2 said:
I'm sorry to tell you it didn't work.
Do I have to extract cab files?
Which version from iutool should use,mine is seems like 2014 version
Click to expand...
Click to collapse
No difference witch version are you using .
and surely you don't have to extract cabs . It the thing that will phone do on prepairing for installation
ngame said:
No difference witch version are you using .
and surely you don't have to extract cabs . It the thing that will phone do on prepairing for installation
Click to expand...
Click to collapse
Could you tell me the steps clearly,please?
Related
WARNING!!! THIS MAY STOP YOUR PHONE FROM WORKING!!! USE AT YOUR OWN RISK!!!
BACKUP FIRST!!!
BACKUP FIRST!!!
BACKUP FIRST!!!
With that said, I've done it and it works fine for me.
EDIT: Added (8107 to 8112) Update for those on Rogers
FYI: These files should be able to be used on all Windows Phones, Not just Lumia's
Hi Everyone. bobzero just posted the Tango CAB Update Links. I've taken his links, Downloaded the Files, Added xboxmod's Cab Sender, and Packaged it all into an easy to use Updater.
This will take your Lumia 900 (or Other Windows Phone) and make it Tango. :victory: <--- Dancing
My Current Info:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prerequisite; You must be running 8112 already. - (Now Added 8112 Update from 8107 for Rogers Customers; Read Below!)
1. Download SuperSport Easy Tango Update.exe.
2. Run SuperSport Easy Tango Update.exe, it should have my SuperSport icon.
3. When it's finished Extracting, you will see a new folder called "Tango Update".
4. Inside "Tango Update" Folder, Find and Run "WP7 Update Cab Sender.bat"
5. When the Command Prompt opens, Press "B" to do a complete backup and then send the update. (If you have a current backup, you can press "S" to only send the update)
That's it, just wait a while for it to complete, about 10 or so minutes. Your phone will reboot with Tango installed. (If doing a backup also, it will take a while longer to backup first)
Keep in mind, this is only the OS update, and not a Firmware update. I'm sure ATT will be updating the Firmware when they release the Tango Update, but for now, enjoy Tango!
ROGERS CUSTOMERS: Download THIS update "SuperSport Easy 8107 to 8112 Update.exe" to bring your phone from 8107 to 8112 FIRST. Then apply the Tango Update. Use it the same way as the Tango Update, with the exception that the Folder name will be different. This one will create a folder called "8112 Update".
For more help on errors, etc, please check this thread. http://forum.xda-developers.com/showthread.php?p=27960331#post27960331
What about rogers customers? We have
Nokia Lumia 900
Rogers ca sw variant ID106 v.02
7.10.8107.79
2175.1002.8107.12084
112.1914.2.0
2.1.75.10
8055
7.17.2.0
0.85.21
xsever said:
What about rogers customers? We have
Nokia Lumia 900
Rogers ca sw variant ID106 v.02
7.10.8107.79
2175.1002.8107.12084
112.1914.2.0
2.1.75.10
8055
7.17.2.0
0.85.21
Click to expand...
Click to collapse
It should work for all Windows Phones. It will only update your OS to 7.10.8773.98. But after applying the update, I've read that some people are getting the Firmware update after connecting to Zune.
Although, you must first be updated to 8112 before this will work. If you go HERE, you can download the 8112 update to run first.
EDIT: Sorry, Windows 8 Double Post.
SuperSport said:
Although, you must first be updated to 8112 before this will work. If you go HERE, you can download the 8112 update to run first.
Click to expand...
Click to collapse
Do I need all the languages files posted there if I only require English.
Also could you point me in the right direction as to how I should install 8112 before going through your procedure to achieve Tango?
Thank you,
xsever said:
Do I need all the languages files posted there if I only require English.
Also could you point me in the right direction as to how I should install 8112 before going through your procedure to achieve Tango?
Thank you,
Click to expand...
Click to collapse
Yes, you should install all the language files if you are unsure which ones you have currently installed.
I will put together another single download file for those that need to upgrade from 8107 to 8112 first. It will work the same way as this current file. Will have it as soon as I can.
SuperSport said:
Yes, you should install all the language files if you are unsure which ones you have currently installed.
I will put together another single download file for those that need to upgrade from 8107 to 8112 first. It will work the same way as this current file. Will have it as soon as I can.
Click to expand...
Click to collapse
Thanks a lot! I am going through the thread you pointed me to. We'll see who beats the other
xsever said:
Thanks a lot! I am going through the thread you pointed me to. We'll see who beats the other
Click to expand...
Click to collapse
Ok, I've got a file ready for you. This will update Rogers Customers (or anyone still on 8107) to 8112. Run this first, then run the Tango Update. You can find it at the bottom of the first post in this thread.
Oh yeah, Beat Ya!
Since I'm not on Rogers, can you please report back and let me know if this worked for you? Thanks!
SuperSport said:
Ok, I've got a file ready for you. This will update Rogers Customers (or anyone still on 8107) to 8112. Run this first, then run the Tango Update. You can find it at the bottom of the first post in this thread.
Oh yeah, Beat Ya!
Since I'm not on Rogers, can you please report back and let me know if this worked for you? Thanks!
Click to expand...
Click to collapse
Will do!
OP, is the Lumia you upgraded on AT&T US?
I have a US AT&T 900 as well. Just wondering if it worked with no issue before I jump
It worked fine for me, but maybe someone else can chime in and give their experience?
If you have an AT&T HTC Titan with only English you have to remove all languages files & keep only
diff-7.10.8107.79-7.10.8112.7-armv7-retail-microsoft.lang_0409.pks_ae068921fd637ba2e3e268b28e6ca1c9f3a9c11f
I tried to do the update with all lang but fail.
I have successfully update my HTC Titan to Tango with this method.
Refering to thread #8
I knew about the English been "lang_0409.pks" because of my previous 8107 forced update, but I do not know the code for other languages.
Cool, anything new/good ?
SuperSport said:
It worked fine for me, but maybe someone else can chime in and give their experience?
Click to expand...
Click to collapse
You try sending a video via SMS text yet? If that works, I'm in...
I'm getting this error when running the 8107 to 8112 update .bat:
Code:
Error: Retrieving the COM class factory for component with CLSID {77CB935D-D0CC-
4249-8643-3C387A514A27} failed due to the following error: 80040154.
Call stack:
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.Initialize()
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.get_Instance()
at wm7update.Program.Main(String[] args)
Press any key to continue . . .
Edit: Just realized I don't have the SDK installed anymore, might have something to do with it.
Update: Did not fix. I am running Windows 8 RP, so that may be the issue... Will try on Windows 7 PC again...
Update: Fixed on Windows8. Forgot about this: http://download.microsoft.com/downl...7-8E73-CE08CCE07AAB/WPSupportToolv2-amd64.msi
Having trouble doing a backup before attempting your method.
Using Backup V1.9 and having issues with Zune being 4.7. Tried many things without luck.
What backup version do you have and which Zune version are you running?
UPDATE: Sorted. Going through a backup now.
---------- Post added at 09:59 PM ---------- Previous post was at 09:30 PM ----------
Backup gave me an error: Timeout occurred while waiting for the device to reboot.
I read somewhere that the backup may have still been successful yet I can't find any backup file inside AppData.
Any help/feedback?
Update2: Backup sorted and validated. Going to 8112 now.
MeatHead88 said:
You try sending a video via SMS text yet? If that works, I'm in...
Click to expand...
Click to collapse
Video does not work yet. I think a Firmware Update is also needed, but not yet available. You can send multiple images in a single mms, and also voice notes in mms.
MrGreencastle said:
I'm getting this error when running the 8107 to 8112 update .bat:
Code:
Error: Retrieving the COM class factory for component with CLSID {77CB935D-D0CC-
4249-8643-3C387A514A27} failed due to the following error: 80040154.
Call stack:
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.Initialize()
at Microsoft.WindowsMobile.DeviceUpdate.DeviceManager.get_Instance()
at wm7update.Program.Main(String[] args)
Press any key to continue . . .
Click to expand...
Click to collapse
Maybe try installing the extra file located in the folder "1" in the extracted folder. Install either the x86 or x64 version depending on your Windows Version.
xsever said:
Having trouble doing a backup before attempting your method.
Using Backup V1.9 and having issues with Zune being 4.7. Tried many things without luck.
What backup version do you have and which Zune version are you running?
Click to expand...
Click to collapse
I use the backup that is included in this download. My Version of Zune is 4.8.2345.0
SuperSport said:
Maybe try installing the extra file located in the folder "1" in the extracted folder. Install either the x86 or x64 version depending on your Windows Version.
Click to expand...
Click to collapse
Yeah, thanks I ended up figuring it out.
Great Success
Just completed update to Tango with AT&T branded Lumia 900 ... worked like a charm!
Also just completed on my AT&T branded Titan II using method described above, thanks pjodm! You must do what he suggests and remove all the other lang packs from the folder. Without doing so will result in an Update Unsuccessful.
Huge thanks to SuperSport!!!
8112 update is successful. Going to Tango now.
UPDATE!
since ms is releasing full rollups of windows 10 mobile in windows update catalog, i'll start to collect and post full rollup links.
TH2:
10586.873 (10.04.2017) (offline: 3944 downloads)
10586.916 (05.05.2017) (offline: 978 downloads)
10586.962 (12.06.2017)
10586.1007 (11.07.2017)
10586.1045 (07.08.2017)
10586.1106 (11.09.2017)
10586.1176 (09.10.2017)
RS1:
14393.1066 (11.04.2017)
14393.1198 (05.05.2017)
14393.1358 (12.06.2017)
14393.1480 (11.07.2017)
14393.1593 (07.08.2017)
14393.1715 (11.09.2017)
14393.1770 (09.10.2017)
14393.1884 (15.11.2017)
14393.1944 (11.12.2017)
14393.2007 (06.01.2018)
14393.2068 (14.02.2018)
14393.2126 (20.03.2018)
RS2:
15063.251 (24.04.2017)
15063.297 (09.05.2017)
Total Download Count: 23258+
the screenshot shows the structure after using my personal build sorting script (powershell):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
old post:
Code:
hi everyone.
please participate in collecting cab update links for more devices/builds and i will add your pastebin links here.
i am starting it and hope you'll help me. collect links with [URL="http://www.telerik.com/download/fiddler"]fiddler[/URL] (only works from wp8 to w10m).
you need to be running the exact build for the update on your phone.
download/open windows insider app and apply to fast ring.
check for updates to download the insider fast configuration update. when it is preparing for update, disable wifi.
after the installation of the preparation update (gears), you're ready to push the cabs.
they can be pushed to the phone with iutool.exe via admin cmd
command: "C:\Program Files (x86)\Windows Phone Kits\8.1\Tools\bin\i386>iutool.exe -v -p c:\cabs"
[URL="http://forum.xda-developers.com/windows-phone-8/development/tools-wdk-wpak-wpdk-cabs-building-wp8-t3183972"]WDK,WPAK,WPDK (containing iutool.exe)[/URL]
put cabs you want to push to c:\cabs folder (create it). only update step by step, build by build.
phone might spit out a error but you can see in settings->update that it is preparing to update and rebooting automatically afterwards.
if you face iutool connection problems, disconnect the device in devices&printers and unplug/plug in usb cable again.
if you want to participate, only enable [URL="http://www.telerik.com/download/fiddler"]fiddler[/URL] right before you hit the "download update button" (check with edge browser if it works first).
that means, when it is checking for updates, it shouldn't use proxy yet.
otherwise windows update can't find any updates and you won't be able to capture them duh..
for general connection problems, install [URL="http://go.microsoft.com/fwlink/?LinkID=525569"]windows device recovery tool[/URL] (contains wp8 device drivers).
to collect cabs easily, save pastebin content to a txt file and open the list with [URL="http://www.freedownloadmanager.org/download.htm"]free download manager[/URL] for example.
[B]warning: the cab update collections are chipset (SOC)/display resolution/language/softkeys dependent.
you might be able to collect all your needed soc/res/lang/softkeys cabs for a unlisted device if you select carefully.
the language files are resolution independent so you can take the ones your device needs from other devices too.
to find out which langs your device needs, capture the update progress once with [URL="http://www.telerik.com/download/fiddler"]fiddler[/URL] and write it down.
a alternative that does not involve downgrading again to wp81 would be to mount your device's ffu rom file to check langs/soc/res (sk should be obvious).
preparation updates can contain device specific packages so only apply them to the correct device.
it is possible that on branded devices, this procedure fails.[/B]
[B]qc8974[/B]
[B]1080x1920[/B]
[B]softkeys[/B]
[B]HTC One M8 for Windows (0P6B140_TMOUS)[/B]
14203-14219 -> [URL="http://pastebin.com/pxxGeBEY"]LINK[/URL] (preparation update)
14219-10536 -> [URL="http://pastebin.com/hY3CiQ2W"]LINK[/URL]
14219-10549 -> [URL="http://pastebin.com/srawxsbT"]LINK[/URL]
14219-10572 -> [URL="http://pastebin.com/SWR2VKwT"]LINK[/URL]
14219-10581 -> [URL="http://pastebin.com/LqGbSZdv"]LINK[/URL]
14219-10586.11 -> [URL="http://pastebin.com/2QRtURXL"]LINK[/URL]
[B]hardkeys[/B]
[B]Nokia Lumia 930 (RM1045_059W1K8_000-CH_MV)[/B]
14226-10166 -> [URL="http://pastebin.com/QjfH6fa6"]LINK[/URL]
14226-10536 -> [URL="http://pastebin.com/2zf0u4iw"]LINK[/URL]
14226-10549 -> [URL="http://pastebin.com/d83zSGH0"]LINK[/URL]
14226-10572 -> [URL="http://pastebin.com/0bAQnLtd"]LINK[/URL]
14226-10581 -> [URL="http://pastebin.com/5TBxd2DX"]LINK[/URL]
14226-10586.11 -> [URL="http://pastebin.com/dbLJ9qyM"]LINK[/URL]
[B]Nokia Lumia 1520 (RM-940_059T5X9_AT&T) (you can disregard any "attwifi" cabs if you're not on AT&T)[/B]
14219-10549 -> [URL="http://pastebin.com/DWnKF1aX"]LINK[/URL]
10572-10581 -> [URL="http://pastebin.com/CyzWHDsQ"]LINK[/URL]
[B]qc8960[/B]
[B]768x1280[/B]
[B]hardkeys[/B]
[B]Nokia Lumia 1020 (RM875_059T7V7_eu_euro2_332)[/B]
12393-14226 -> [URL="http://pastebin.com/RF79E2B8"]LINK[/URL] (preparation update)
14226-10166 -> [URL="http://pastebin.com/KwCJQ7R0"]LINK[/URL]
14226-10536 -> [URL="http://pastebin.com/p7bp4qha"]LINK[/URL]
14226-10549 -> [URL="http://pastebin.com/7BfPQfna"]LINK[/URL]
14226-10572 -> [URL="http://pastebin.com/aNPTwEJm"]LINK[/URL]
14226-10581 -> [URL="http://pastebin.com/P2tfRamJ"]LINK[/URL]
14226-10586.11 -> [URL="http://pastebin.com/YC6uLCrR"]LINK[/URL]
[B]qc8x26[/B]
[B]480x800[/B]
[B]softkeys[/B]
[B]Nokia Lumia 635 [512MB ram] (RM-974_059W747_000-CH)[/B]
14219-10536 -> [URL="http://pastebin.com/84uu2gTy"]LINK[/URL]
14219-10572 -> [URL="http://pastebin.com/YSFspNKh"]LINK[/URL]
14219-10581 -> [URL="http://pastebin.com/YjH6X1KR"]LINK[/URL]
14219-10586.11 -> [URL="http://pastebin.com/nN2TT2YR"]LINK[/URL]
[B]720x1280[/B]
[B]hardkeys[/B]
[B]Nokia Lumia 830 (RM-984_059X0J5_000-CH)[/B]
15148-10581 -> [URL="http://pastebin.com/6RdbXHE9"]LINK[/URL]
15148-10586.11 -> [URL="http://pastebin.com/hQzY4S7g"]LINK[/URL]
reserved post 2
Looks like the lumia 1520 and the M8 are the same all around... what are the odds I can use these cabs to get from 10166 to 10572?
i tried to update from 10536 to 10572 and it didn't work even if they are full canonical cabs (spkg).
from wp81 to w10m it should work. but if you have a branded device, it might fail.
HD2Owner said:
i tried to update from 10536 to 10572 and it didn't work even if they are full canonical cabs (spkg).
from wp81 to w10m it should work. but if you have a branded device, it might fail.
Click to expand...
Click to collapse
Eh, I can do that just by choosing fast ring. Trying to get to 10572 while preserving Astoria. Ah well, guess I have to wait to the next fast ring push, which should solve the upgrade bug.
Hi,
First thanks for making this thread and really need to track update logs.
But why you/other people's still are linking/downloading wp8.1 OEM kit ? Since Windows 10 Mobile OEM kit is public kit.
And 8.1 KIT is huge size of 4-5 GB.
Just grab the WDK 10, it's only 600 MB. (Included all most of the files even oem certs, Updated tools, like FFUTool for profile mode etc.)
I hope that help to you/all other peoples always.
Btw I've most interesting things/research base on these tools, bringing very soon.
EDIT: Links added
Windows Driver Kit for Windows 10:
Download
OR official Page for Download All other tools.
https://msdn.microsoft.com/en-us/windows/hardware/dn913721.aspx
djamol said:
Hi,
First thanks for making this thread and really need to track update logs.
But why you/other people's still are linking/downloading wp8.1 OEM kit ? Since Windows 10 Mobile OEM kit is public kit.
And 8.1 KIT is huge size of 4-5 GB.
Just grab the WDK 10, it's only 600 MB. (Included all most of the files even oem certs, Updated tools, like FFUTool for profile mode etc.)
I hope that help to you/all other peoples always.
Btw I've most interesting things/research base on these tools, bringing very soon.
Click to expand...
Click to collapse
Link?
Thanks! Maybe now I can complete the update of my 640 to build 10536. It looked like that was pulled from the Fast Ring after the release of 10549 and 10572, so any devices still on Slow Ring build 10166 were stuck in an endless update loop when going to the Fast Ring.
How can install this cab files? i have lumia 635 512mb ram please somebody help me
snickler said:
Link?
Click to expand...
Click to collapse
Updated previous post and added links.
djamol said:
Updated previous post and added links.
Click to expand...
Click to collapse
Yeah, I didn't realize.. I installed the AIK a while back, so I had the tools installed .
10581 links added
let me know if a build rollup with all cabs combined and sorted with descriptions would be appreciated.
i did that already for build 10581 now.
I'm getting error 0x80188302, google says it's E_PACKAGE_ALREADY_INSTALLED. Is there any way to track or ignore package collisons?
t4m4m0 said:
I'm getting error 0x80188302, google says it's E_PACKAGE_ALREADY_INSTALLED. Is there any way to track or ignore package collisons?
Click to expand...
Click to collapse
leave out the studyid package(s). those are the needed windows insider configuration updates.
you might have this/those installed already .
Saw this article after I did the update to 10581. Need file list for Lumia 920 (RM-820_nam_att_100) to restore astoria.
So how do I install a group of these cabs to get to 10536 from 8.1?
edit: Can I just use iutool from win 8.1? I haven't been in the win8m scene, just fooled around with win10m.
loudog3114 said:
So how do I install a group of these cabs to get to 10536 from 8.1?
Click to expand...
Click to collapse
yes. enable wifi and open windows insider app. when you see the ring selection (fast/slow),
disable wifi via notification center. then apply to fast ring. device will reboot.
then you should be ready to push cabs. after cab transfer, iutool says "update started".
then it will spit out a error but if you go to settings-> update, you can see that it is preparing for update.
the phone will automatically reboot after update preparation and apply the cabs (shows gears).
followed by migrating data as usual.
HD2Owner said:
yes. enable wifi and open windows insider app. when you see the ring selection (fast/slow),
disable wifi via notification center. then apply to fast ring. device will reboot.
then you should be ready to push cabs. after cab transfer, iutool says "update started".
then it will spit out a error but if you go to settings-> update, you can see that it is preparing for update.
the phone will automatically reboot after update preparation and apply the cabs (shows gears).
followed by migrating data as usual.
Click to expand...
Click to collapse
Awesome. I had resigned myself to having to use 10166 if I wanted astoria but I am going to give this a go now.
1. Download Charles ( https://www.charlesproxy.com/download/ )
2. Open it and connect your Windows 10 Mobile with same WIFI as that of PC
3. Go to WiFi settings in W10M .
4. Click on it.
5. Click on Proxy .
6. Choose " Manual Setup "
7. Write your PC name in place of " Address "
9. Write 8888 in place of " Port "
Now Charles will show data from your Windows 10 Mobile.
10. Start downloading Any app or game you want from Windows Store. It might show error but click on retry.
11. Once the download is finished. Go to Charles.
12 Find " http://tlu.dl.delivery.mp.microsoft.com " and click on it.
13. you will find something like this " http://tlu.dl.delivery.mp.microsoft...=9ej1qxsFetMo5b+qSBWRfxdvaKRjGoVclROsaEqCZSA= " ( Here its for Action Note app )
14. Copy it and visit it on any browser and you will be able to download the appx files.
15. However the link wont work after 5 minutes as I think its storing the cache of the app. But using this trick you can download any W10M apps. Even CORE apps like Store.
We found it a month ago. However did not share fearing Microsoft might fix it. Checkout some of the apps we extracted in the link. Its more like extracting the app instead of downloading.
http://winphans.com/forum/windows-10-mobile-apps/
Credits - Team WinPhans and members of WP! facebook Group
EDIT:1
PLEASE USE " APP INSTALLER " FROM WINDOWS STORE TO SIDELOAD APPS ON WINDOWS 10 RS
Link- App Installer (https://www.microsoft.com/store/apps/9nblggh4nns1)
EDIT:2
If the 8888 does not work then go to proxy settings in Charles and check and use the new port.
http://imgur.com/mID4qbd
EDIT:3
We also have noticed that now you do not need to wait for the app to finish downloading to use the cache file link (step-11) ,once it starts downloading and the link with tlu.d..... links comes up, copy and paste it in a browser and download will start. Also the timer for the link has been increased to 20 minutes.
katsuga said:
1. Download Charles ( https://www.charlesproxy.com/download/ )
2. Open it and connect your Windows 10 Mobile with same WIFI as that of PC
3. Go to WiFi settings in W10M .
4. Click on it.
5. Click on Proxy .
6. Choose " Manual Setup "
7. Write your PC name in place of " Address "
9. Write 8888 in place of " Port "
Now Charles will show data from your Windows 10 Mobile.
10. Start downloading Any app or game you want from Windows Store. It might show error but click on retry.
11. Once the download is finished. Go to Charles.
12 Find " http://tlu.dl.delivery.mp.microsoft.com " and click on it.
13. you will find something like this " http://tlu.dl.delivery.mp.microsoft...=9ej1qxsFetMo5b+qSBWRfxdvaKRjGoVclROsaEqCZSA= " ( Here its for Action Note app )
14. Copy it and visit it on any browser and you will be able to download the appx files.
15. However the link wont work after 5 minutes as I think its storing the cache of the app. But using this trick you can download any W10M apps. Even CORE apps like Store.
We found it a month ago. However did not share fearing Microsoft might fix it. Checkout some of the apps we extracted in the link. Its more like extracting the app instead of downloading.
http://winphans.com/forum/windows-10-mobile-apps/
Credits - Team WinPhans and members of WP! facebook Group
Click to expand...
Click to collapse
i download app, but appx and xap blocked for modding.
reksden said:
i download app, but appx and xap blocked for modding.
Click to expand...
Click to collapse
i have not tried modding it ( i dont even know how to do that ) But one of my friend said he could edit those.
And what do you do with them, because I only get this message
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Blocking this way of installing apps is one of the most stupid decision Microsoft ever made. I have apps bought and downloaded from web store and I can't install them now from the SD card. I'm too polite to say what really needs to be said.
I only say this: I have apps downloaded from my iPhone 4 that I can still install via iTunes in any iPhone 6 or iPad air. Not pirated content, apps that I have bought.
w.bogdan said:
And what do you do with them, because I only get this message
Blocking this way of installing apps is one of the most stupid decision Microsoft ever made. I have apps bought and downloaded from web store and I can't install them now from the SD card. I'm too polite to say what really needs to be said.
I only say this: I have apps downloaded from my iPhone 4 that I can still install via iTunes in any iPhone 6 or iPad air. Not pirated content, apps that I have bought.
Click to expand...
Click to collapse
if they are in appx ( w10m apps are all in appx ) then deploy them over wifi via developers option. ez
katsuga said:
if they are in appx ( w10m apps are all in appx ) then deploy them over wifi via developers option. ez
Click to expand...
Click to collapse
"Failure reason: Failed to start deployment. Failure text: Package could not be opened. (0x80073cf0)"
w.bogdan said:
"Failure reason: Failed to start deployment. Failure text: Package could not be opened. (0x80073cf0)"
Click to expand...
Click to collapse
i thiunk the package you have downloaded is corrupted. Tryout those i have extracted in http://winphans.com/forum/windows-10-mobile-apps/ . this are working for most of us
http://www.appx4fun.com has many (not all) appx package links.
@w.bogdan I think that's a bug in 14267.
winphouser said:
http://www.appx4fun.com has many (not all) appx package links.
@w.bogdan I think that's a bug in 14267.
Click to expand...
Click to collapse
They do not have W10M version in appx4fun
Can anybody upload tunein radio and geonet ?
ddobra said:
Can anybody upload tunein radio and geonet ?
Click to expand...
Click to collapse
give me the link
tunein radio and geonet = Xaps not Appx
winphouser said:
http://www.appx4fun.com has many (not all) appx package links.
@w.bogdan I think that's a bug in 14267.
Click to expand...
Click to collapse
Using wpsnitch.appspot.com I can download Lumia Camera (This app is for Windows Phone 8.1.) https://www.microsoft.com/en-us/store/apps/lumia-camera/9wzdncrfjbf9 and install it on W10M, but I can't install Lumia Camera (This app works on Windows 8 and Windows 10) https://www.microsoft.com/en-us/store/apps/lumia-camera/9wzdncrfhww1
There is definitely a bug ... in Microsoft.
titi66200 said:
tunein radio and geonet = Xaps not Appx
Click to expand...
Click to collapse
Tunein - http://cdn.marketplacecontent.windowsphone.com/public/36132edd-87d5-4e75-a7a1-46b77ce041ea ( while downloading, rename the file to anything.xap )
GeoNet - http://cdn.marketplacecontent.windowsphone.com/public/45a40238-557a-4eb2-aa10-5875e0749980 while downloading, rename the file to anything.xap )
katsuga said:
Tunein - http://cdn.marketplacecontent.windowsphone.com/public/36132edd-87d5-4e75-a7a1-46b77ce041ea ( while downloading, rename the file to anything.xap )
GeoNet - http://cdn.marketplacecontent.windowsphone.com/public/45a40238-557a-4eb2-aa10-5875e0749980 while downloading, rename the file to anything.xap )
Click to expand...
Click to collapse
tunein is appx file but it for pc now ,xap for wp8.1,it will work for wp10m when they change app-manifest for wp10 version. as it support arm.
in 14267 you can't install appx files from outside,it a bug in 14267
raghulive said:
tunein is appx file but it for pc now ,xap for wp8.1,it will work for wp10m when they change app-manifest for wp10 version. as it support arm.
in 14267 you can't install appx files from outside,it a bug in 14267
Click to expand...
Click to collapse
if there is an appx file then i can extract ot using the process on the post
katsuga said:
if there is an appx file then i can extract ot using the process on the post
Click to expand...
Click to collapse
Using fidder you can download in pc, then you can edit manifest file to targeted wm10 version , but re-signing is the problem to deploy,all universal appx can be installed when the official wm10 rollout, then we can just download and install them
katsuga said:
i thiunk the package you have downloaded is corrupted. Tryout those i have extracted in http://winphans.com/forum/windows-10-mobile-apps/ . this are working for most of us
Click to expand...
Click to collapse
The downlink link for Windows Store app from your site (http://winphans.com/forum/windows-10-mobile-apps/) is dead. Do you still have a copy of it? Thanks.
@raghulive SignTool.exe to resign and you can use self-signed cert. Should work I think..
Sent from mTalk
TristanLeBoss said:
The downlink link for Windows Store app from your site (http://winphans.com/forum/windows-10-mobile-apps/) is dead. Do you still have a copy of it? Thanks.
Click to expand...
Click to collapse
I had used adfly with most of the apps download link which is blocked in many country ( I did not know that ) and later I forgot to change the links
However some are basic links directed to my onedrive account. Eg - Facebook beta.
Sent from my Micromax A106 using XDA-Developers mobile app
Hello,
this is a guide to unlock bootloader!
Prerequisites:
WPInternals: http://www.wpinternals.net/index.php/downloads (Download the latest one, 1.2)
WDRT: http://go.microsoft.com/fwlink/?LinkID=525569 (Needed for drivers)
HEX loaders: Link
FFU Image of your phone (You can download it from WDRT or from the site www.lumiafirmware.com)
SBL3 Engineering: Link
(SBL3 is supported only on: L520-620-625-810-820-822-920-925-1020)
Optional:
OSFMount: http://www.osforensics.com/tools/mount-disk-images.html
Procedure:
1) Download and install Windows Device Recovery Tool (WDRT)
2) Download Windows Phone Internals (WPInternals) and extract that in a folder (for example C:\WPInternals)
3) Create a folder named "Loader" into C:\WPInternals
4) Download HEX loaders and extract it in the folder previously created.
5) Download SBL3 engineering archive (Only if you device is in supported list)
6) Create a folder named "SBL3" into C:\WPInternals and extract the SBL3 Engineering archive.
7) Download FFU image of your phone from WDRT or from lumiafirmware.com
You should get this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Optional:
Now, connect your Windows device and start WPInternals:
Go to "Unlock bootloader" (on the left) and press ok, your phone will be rebooted into flash mode:
After entering flash mode you should do:
The first one you need to select an FFU image
(If you downloaded it from WDRT, go to C:\ProgramData\Microsoft\Packages\Products\RM-xxx\ and select the ffu image file. WARNING: ProgramData is an hidden folder!)
The second one, select the folder "C:\WPInternals\Loader"
The third one, if you device is supported, select your SBL3 Engineering image (In my case, Lumia 920) from the folder "C:\WPInternals\SBL3".
BEWARE that you can brick you phone if you flash the wrong image.
You should get this:
Now press continue and wait.
DONE! You have successfully unlocked your phone!
If you flashed the SBL3 image, you can access to Mass Storage Mode.
Reserved for BCD editing guide
Reserved.
Is there a way to do this on other version of WM 10 than the ones supported by WP Internals?
dape16 said:
Is there a way to do this on other version of WM 10 than the ones supported by WP Internals?
Click to expand...
Click to collapse
Should work on all versions of W10M
is it necessary for what?
Satirus said:
is it necessary for what?
Click to expand...
Click to collapse
Editing BCD, creating custom roms, and so on (and someone expert can create custom rom based on android for example!)
ADeltaX said:
Editing BCD, creating custom roms, and so on (and someone expert can create custom rom based on android for example!)
Click to expand...
Click to collapse
Thanks for your kind reply. That's massive!
Should we at least hope for this to happen with x4x models?
Lanex777 said:
Should we at least hope for this to happen with x4x models?
Click to expand...
Click to collapse
yes
I have a question about the tutorial unlock bootloader in lumia 520
have lumia 520 build 10586.242 windows 10 mobile and my question is work tutorial in the version build ?
and can use files xap ?
chinitopex said:
I have a question about the tutorial unlock bootloader in lumia 520
have lumia 520 build 10586.242 windows 10 mobile and my question is work tutorial in the version build ?
Click to expand...
Click to collapse
Yes, it should work with that version.
chinitopex said:
and can use files xap ?
Click to expand...
Click to collapse
You mean interp unlock?
ADeltaX said:
chinitopex said:
I have a question about the tutorial unlock bootloader in lumia 520
have lumia 520 build 10586.242 windows 10 mobile and my question is work tutorial in the version build ?
Click to expand...
Click to collapse
Yes, it should work with that version.
Click to expand...
Click to collapse
Beware! I just tried unlocking the bootloader of 10586.242 on a Lumia 925 (RM-892) and got stuck at "Sending Loader". Next I'll go the recommended way:
Flash a Windows Phone 8.1 FFU
Run Windows Update until you have at least version 8.10.14219.341 of the OS
Unlock the bootloader using an Engineering SBL3 (only possible on compatible phones)
Run the Windows Insider tool and update to Windows 10 Mobile, possibly needs to run Windows Update a couple of times for the latest build
Enable Root Access directly on the phone
Bonus: Create a Cusom ROM
// update:
After several failed attempts (*aaaahahhhrhhrrgggg!!!!111111eleven*) I finaly got it:
Drivers from the Nokia Care Suite and the correct(tm) loader ftw.
.
ADeltaX
i dont have interp unlock in my lumia 520
so I cant use files xap in the moment and Swordfishx86 Remember my phone is lumia 520
so, thank you guys
chinitopex said:
[...] Swordfishx86 Remember my phone is lumia 520
Click to expand...
Click to collapse
My previous post was merely a report from my experience with wpInternals and not directed at you especially.
Swordfishx86 said:
Beware! I just tried unlocking the bootloader of 10586.242 on a Lumia 925 (RM-892) and got stuck at "Sending Loader". Next I'll go the recommended way:
Flash a Windows Phone 8.1 FFU
Run Windows Update until you have at least version 8.10.14219.341 of the OS
Unlock the bootloader using an Engineering SBL3 (only possible on compatible phones)
Run the Windows Insider tool and update to Windows 10 Mobile, possibly needs to run Windows Update a couple of times for the latest build
Enable Root Access directly on the phone
Bonus: Create a Cusom ROM
// update:
After several failed attempts (*aaaahahhhrhhrrgggg!!!!111111eleven*) I finaly got it:
Drivers from the Nokia Care Suite and the correct(tm) loader ftw.
.
Click to expand...
Click to collapse
I forgot to add more info about the possibility of getting stuck on "Sending Loader", thank you
chinitopex said:
ADeltaX
i dont have interp unlock in my lumia 520
so I cant use files xap in the moment and Swordfishx86 Remember my phone is lumia 520
so, thank you guys
Click to expand...
Click to collapse
Enabling Root Access should give you interop unlock!
ADeltaX said:
Enabling Root Access should give you interop unlock!
Click to expand...
Click to collapse
Thanks Adeltax
About Enabling Root Access interop unlock
you can tell me how i can make this in my lumia 520 ?/ please
chinitopex said:
Thanks Adeltax
About Enabling Root Access interop unlock
you can tell me how i can make this in my lumia 520 ?/ please
Click to expand...
Click to collapse
Go on "Enable Root Access", an click on Unlock Phone. It should work.
PS: You need an engineering SBL3.
ADeltaX said:
Go on "Enable Root Access", an click on Unlock Phone. It should work.
PS: You need an engineering SBL3.
Click to expand...
Click to collapse
I can use the SBL3 Engineering that are above?
and thank you so much
I have purchased a few of the Cube WP10 phablets and am actually impressed. However, they ship with Windows 10 Mobile release 1511. I have enrolled in the Insiders Program, but nothing happens. Does anyone have an idea on how to force an upgrade to 1607? This device is not listed in the wdrt tool, nor are there any software/firmware updates on the Cube-tablet website. I would be willing to risk experimentation with this device, but don't know how to fool the phone into forced update. Any suggestions??
It worked for me (does not need the windows insider app)
You can use the same method I used in my lumia 630, just do not know if it will work on your phablet.
Go to all settings-> system-> about and reset your phone
After reset do the interop unlock
You will need to have access to the registry keys
Depending on whether your phablet is dual yes or no, place the following keys
HKLM -> SYSTEM -> Platform -> DeviceTargetingInfo
"PhoneManufacturer" = MicrosoftMDG
"PhoneManufacturerModelName" = RM-1085_11302 (for Single SIM devices)
// *** For all dual sim devices try = RM-1116_11258 ***
PhoneModelName = Lumia 950 XL (single sim) or Lumia 950 XL Dual SIM (for dual)
PhoneHardwareVariant = RM-1085
// *** For all dual sim devices try = RM-1116***
Apply the keys, and then restart the device.
Note: you do not need windows insider, but a lot of patience.
The update will not be available as soon as you restart, you will have to wait for the microsoft servers to recognize that your device is upgraded.
I had to wait for more than 24 hours to recognize the update.
And of course, need to have internet on the device during that period.
Note: Do not tamper with the registry keys again until it recognizes the update
Hello, it's me again.
Hello
I also have a cube wp10
I've enabled developer mode in the settings
And I just put the registry keys as follows
HKLM -> SYSTEM -> Platform -> DeviceTargetingInfo
PhoneManufacturer = MicrosoftMDG
PhoneManufacturerModelName = RM-1116_11258
PhoneModelName = Lumia 950 XL Dual SIM
PhoneHardwareVariant = RM-1116
I then installed windows insider
I chose the ring
And then he will restart
Then go on updates and it will be there
Any Problems with RS2 upgrade?
Hello Eguif,
I will be trying the upgrade method that you outline below. Have there been any*problems with the device since you upgraded? What is the*latest insider version that you have now installed on the Cube WP10?
Thanks,
RicketyTiger
eguif said:
Hello
I also have a cube wp10
I've enabled developer mode in the settings
And I just put the registry keys as follows
HKLM -> SYSTEM -> Platform -> DeviceTargetingInfo
PhoneManufacturer = MicrosoftMDG
PhoneManufacturerModelName = RM-1116_11258
PhoneModelName = Lumia 950 XL Dual SIM
PhoneHardwareVariant = RM-1116
I then installed windows insider
I chose the ring
And then he will restart
Then go on updates and it will be there
Click to expand...
Click to collapse
Hello RicketyTiger
RicketyTiger said:
Hello Eguif,
I will be trying the upgrade method that you outline below. Have there been any*problems with the device since you upgraded? What is the*latest insider version that you have now installed on the Cube WP10?
Thanks,
RicketyTiger
Click to expand...
Click to collapse
The only problem I noticed was that it does not change the language, with only English remaining.
The windows version is 1607
And build is 10.0.14393.67
Hi RicketyTiger
I took a picture of him.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you wonder why the screen size is different is because I used the key of the lumia 1520
If you wonder why the icons are different is because I used the app transform for this
In case you wonder how I managed to install applications that are not in the store is because I did the interop unlock
I guess I am lost...
Hi again,
I installed Interop and opened registry without problem. I could also navigate to HKDM SYSTEM Platform and prepare to add the DeviceTargetInfo line. However, I have not done this because I do not know how or where to add the PhoneManufacturer, xxModelName, xxHardwareVariant lines. I guess I am more of a novice than I realize. Can you further explain? Thanks
RicketyTiger
eguif said:
I took a picture of him.
View attachment 3981478
If you wonder why the screen size is different is because I used the key of the lumia 1520
If you wonder why the icons are different is because I used the app transform for this
In case you wonder how I managed to install applications that are not in the store is because I did the interop unlock
Click to expand...
Click to collapse
It's okay to get lost at first, it happens to everyone.
RicketyTiger said:
Hi again,
I installed Interop and opened registry without problem. I could also navigate to HKDM SYSTEM Platform and prepare to add the DeviceTargetInfo line. However, I have not done this because I do not know how or where to add the PhoneManufacturer, xxModelName, xxHardwareVariant lines. I guess I am more of a novice than I realize. Can you further explain? Thanks
RicketyTiger
Click to expand...
Click to collapse
You already have access to the registry keys and that's fine.
DeviceTargetingInfo is a folder and you must enter it
When you enter it there will be several keys.
You will not create or add any keys, you will only modify the value of some keys.
The first key:
PhoneManufacturer
Change the value that is inside the key by this:
MicrosoftMDG
The second key:
PhoneManufacturerModel
Change the value that is inside the key by this:
RM-1116_11258
The third key:
PhoneModel
Change the value that is inside the key by this:
Lumia 950 XL Dual SIM
And finally the fourth and last key:
PhoneHardwareVariant
Change the value that is inside the key by this:
RM-1116
Thanks!!
When I browse the registry, Interop Tool crashes each time that I select Platform. It appears as though DeviceTargetingInfo folder does not exist. If I try to create
eguif said:
You already have access to the registry keys and that's fine.
DeviceTargetingInfo is a folder and you must enter it
When you enter it there will be several keys.
You will not create or add any keys, you will only modify the value of some keys.
The first key:
PhoneManufacturer
Change the value that is inside the key by this:
MicrosoftMDG
Finally figured it out. Update is downloading now. Kindly reply in this conversation if you discover any noteworthy issues or opportunities with Cube WP10 and Redstone 2. I will do the same.
Again, many thanks.
The second key:
PhoneManufacturerModel
Change the value that is inside the key by this:
RM-1116_11258
The third key:
PhoneModel
Change the value that is inside the key by this:
Lumia 950 XL Dual SIM
And finally the fourth and last key:
PhoneHardwareVariant
Change the value that is inside the key by this:
RM-1116
Click to expand...
Click to collapse
Hello RicketyTiger, it's me again.
RicketyTiger said:
When I browse the registry, Interop Tool crashes each time that I select Platform. It appears as though DeviceTargetingInfo folder does not exist. If I try to create
Click to expand...
Click to collapse
We need to see some points before.
You mentioned that the interop tools hang when you enter Platform
Make sure Developer Mode is enabled under All Settings> Update and Security> for Developers
If not, enable developer mode and retry accessing the Platform folder and make sure the interop tools do not crash
You do not need to create registry keys, they already exist
I need your feedback to proceed.
All Is Well
Hi Eguif,
I actually was successful in getting the registry modified and upgrading to 1607. Please ignore the previous post. Many thanks to you for all of your help. Today I used the off-line Maps and GPS features including voice navigation. It was quite funny to hear the girl provide English navigation, except when she needed to speak numbers -- those were spoken in what I presume to be Chinese. Hilarious!!
Thanks again,
RicketyTiger
eguif said:
We need to see some points before.
You mentioned that the interop tools hang when you enter Platform
Make sure Developer Mode is enabled under All Settings> Update and Security> for Developers
If not, enable developer mode and retry accessing the Platform folder and make sure the interop tools do not crash
You do not need to create registry keys, they already exist
I need your feedback to proceed.
Click to expand...
Click to collapse
Hi RicketyTiger
RicketyTiger said:
Hi Eguif,
I actually was successful in getting the registry modified and upgrading to 1607. Please ignore the previous post. Many thanks to you for all of your help. Today I used the off-line Maps and GPS features including voice navigation. It was quite funny to hear the girl provide English navigation, except when she needed to speak numbers -- those were spoken in what I presume to be Chinese. Hilarious!!
Thanks again,
RicketyTiger
Click to expand...
Click to collapse
I'm very happy to hear that you succeeded.
And I would recommend that you do not stop now but continue to explore more about registry keys and hacks.
Try to get the most out of your phablet's potential
You will be surprised.
And I have to thank you for starting this topic.
Until another time,
Eguif
eguif said:
I'm very happy to hear that you succeeded.
And I would recommend that you do not stop now but continue to explore more about registry keys and hacks.
Try to get the most out of your phablet's potential
You will be surprised.
And I have to thank you for starting this topic.
Until another time,
Eguif
Click to expand...
Click to collapse
Has anyone been able to load alternative language packs onto this Phablet? or Continuum? There is some real scope to make this budget phone much better! I am a real novice, and can see that it is possible for other WM phones, but unsure quite where to start.
Any help would be gratefully received!
Hello TheFernando2
TheFernando2 said:
Has anyone been able to load alternative language packs onto this Phablet? or Continuum? There is some real scope to make this budget phone much better! I am a real novice, and can see that it is possible for other WM phones, but unsure quite where to start.
Any help would be gratefully received!
Click to expand...
Click to collapse
I was able to put language packs and also put the continuum.
But before proceeding, I need to know what your windows version is on your phablet.
eguif said:
I was able to put language packs and also put the continuum.
But before proceeding, I need to know what your windows version is on your phablet.
Click to expand...
Click to collapse
The OS build is: 10.0.14393.693
Version 1607
Hello TheFernando2
TheFernando2 said:
The OS build is: 10.0.14393.693
Version 1607
Click to expand...
Click to collapse
You will need a computer
The following link will take you to the Microsoft Updates page
Https://www.catalog.update.microsoft.com
In the search box type 000-(abbreviation of your language)
example:
000-br (br means Brazilian Portuguese)
000-us (us means English)
000-fr (fr means French)
Put the abbreviation of your language
Then find your version and click download
Will open a new window
In this new window press ctrl + f and enter the abbreviation of your language
Click only those that have cbs signature and not those with cbsu signature
And the download will start
next step
Download this file and put it inside a folder and folder needs to be inside C:\
View attachment iutool.7z
Create a new folder also inside C:\
This folder is where the downloaded files should be
But only a .cab file can be in this folder
Then open the cmd as administrator and enter the iutool folder
Example: cd C:\'name of the folder you extracted the zip file from'
Place without the quotation marks
Press enter
And then type: uitool -p 'folder name with the .cab file'
Without the quotation marks
Press enter
Wait a few moments and your phone will restart
If it does not work try with others .cab files downloaded
You can only put in the folder created one at a time
I need your feedback to find out how you do.
I need your feedback to find out how you do.[/QUOTE]
Thank you for such as detailed response. Very appreciated.
I have downloaded all the files, how ever the iutool file isn't working. Initially I was getting 2 missing .DLL errors.
MSVCP110.dll and MSVCR110.dll
So I copied the other iutool.exe file into the iutool directory. Then I got this error within the command prompt:
ERROR: 0x80070490
command failed. (HRESULT = 0x80070490)
I tried this with all the .cab files in the cab folder and with one at a time
There are 7 cab files.
I am using a MS Surface Pro4 if it make any difference.. (Can't see why, but in case!)
Can I ask, are the 2 docking .cab files I need in the catalog you pointed me to?
Thank you again
---------- Post added at 09:31 PM ---------- Previous post was at 08:51 PM ----------
it appears that iutool is not connecting to my phablet.. Any idea?
Hello TheFernando2
TheFernando2 said:
I need your feedback to find out how you do.
Thank you for such as detailed response. Very appreciated.
I have downloaded all the files, how ever the iutool file isn't working. Initially I was getting 2 missing .DLL errors.
MSVCP110.dll and MSVCR110.dll
So I copied the other iutool.exe file into the iutool directory. Then I got this error within the command prompt:
ERROR: 0x80070490
command failed. (HRESULT = 0x80070490)
I tried this with all the .cab files in the cab folder and with one at a time
There are 7 cab files.
I am using a MS Surface Pro4 if it make any difference.. (Can't see why, but in case!)
Can I ask, are the 2 docking .cab files I need in the catalog you pointed me to?
Thank you again
---------- Post added at 09:31 PM ---------- Previous post was at 08:51 PM ----------
it appears that iutool is not connecting to my phablet.. Any idea?
Click to expand...
Click to collapse
I'm sorry for my mistake
By an oversight I ended up putting two iutool
The correct iutole is the one with a size of 2.38 MB that is zipped in my previous post with the extension .7z
As for the error of the two .dll files, it is because you opened the wrong file that I accidentally sent.
So as not to confuse you, I'll send the file again
View attachment iutool.7z
As for the command prompt, there will always be an error, you should only be careful if after a few seconds after the error phablet restarts
As for your last question, I did not quite understand what you meant, could you clarify your question?
As for the surface
I do not think there's any difference
eguif said:
As for the command prompt, there will always be an error, you should only be careful if after a few seconds after the error phablet restarts
As for your last question, I did not quite understand what you meant, could you clarify your question?
Click to expand...
Click to collapse
My question is how do I know that my phablet has is connected to the PC correctly for the iutool to work. When I type iutool -l which should say what phone is connected it does not return any phones as being connected. The PC recognises the phone and shows it in explorer.
I will try the alternative file you kindly send.
Thank you
---------- Post added at 08:24 PM ---------- Previous post was at 08:11 PM ----------
TheFernando2 said:
My question is how do I know that my phablet has is connected to the PC correctly for the iutool to work. When I type iutool -l which should say what phone is connected it does not return any phones as being connected. The PC recognises the phone and shows it in explorer.
I will try the alternative file you kindly send.
Thank you
Click to expand...
Click to collapse
Edit:
Hi I have tried that and I am getting the 2 missing .dll errors still
I appreciate your help!
well, idon´t know for sure, but maybe can be posible to add more languages to this phablet, in the same way that we do in the xiaomi mi4. take a look to this post.
https://forum.xda-developers.com/wi...orial-how-to-add-languages-to-xiaomi-t3455311
Of course, you have to do this before you update the system, just after done a hard reset.