Develop Bugs

CM12.1 ROM v3 BetaHydri for LeTV 1 Pro US - GPS Working? Free Ram?

Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri

i need your help too sir
cm-12.1-20160713-Bet…weakV3.zip501.1 MB , so the system just 500 mb?
now im still using eui with malware , so i just follow the installation step?
Tested V3 installation sequence
I went to TWRP 3.0.2 for a factory reset wipe
Installed ROM "cm-12.1-20160713-BetaHydri-CollapseTweakV3.zip"
Installed OpenGApps arm64 5.1 Nano
Installed all three ZIPs from DolbyAtmos Fix
Wiped Caches via TWRP
Rebooted

I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)

Presidente_84 said:
Hi! i am new to the forum and have a Letv Le 1 Pro US with stock malware Rom.
I want to change to CM12.1 ROM v3 by BetaHydri. But have a few questions. I am in doubt in rooting stock rom and clean the trojans and adware or changing to this custom Rom.
The rom in question is in this thread, but i can't ask there:
http://forum.xda-developers.com/leeco-le1-pro/development/cm12-1-rom-betahydri-letv-1-pro-t3416651
1-My question is if the GPS works fine? In stock Malware Rom is very fast. I see some custom roms with gps problem.
2-4G data works well on Sim2? and Hotspot?
3-Is any major bug on this v3 Custom Rom?
4-How many free Ram is available? without installing other apps besides the ones that are in the ROM.
Thank You, especially the user @BetaHydri
Click to expand...
Click to collapse
everyone works mate just go ahead and install v4 cm

I'm on V3 and all seems ok, what's the differences between V3 & V4?

martinbanshee said:
I'm on V3 and all seems ok, what's the differences between V3 & V4?
Click to expand...
Click to collapse
"Only some build.prop changes as some folks reported problems. [...]
one of the main changes was this:
ro.telephony.default_network=22,22 and ro.ril.hsxpa=1
it was before
ro.telephony.default_network=10,10 and ro.ril.hsxpa=2"
So LTE and UMTS changes basically

Thanks, I'll try V4 for a few days and see how it goes.
Sent from Tapatalk

thank you all guys.
Now i am with the stock original ROM EUI without malware, without any problem.
Can anyone post some pictures or screenshots from CM 12.1 ROM v4?
to see the appearance of the system

Stiffrigg said:
I'm on the V4, and actually everything seems good! Just have to test some sensors (Gyroscope)
Click to expand...
Click to collapse
How about MHL TV-OUT & IR blaster?

hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?

dragangiga said:
hello guys, sorry for bad english, i have problem on CM 12.1 V3, when some call me or message come my flash blinking. How to fix that?
Click to expand...
Click to collapse
BetaHydri said:
Hi,
you don't need to uninstall FlashRing.
With the Flash RIng App you can configure which APP and when the Flash should be used for notification.
View attachment 3819790
View attachment 3819791
View attachment 3819792
View attachment 3819793
View attachment 3819794
Click to expand...
Click to collapse
Sent from my LeTv 1 Pro using Tapatalk

letv le 1 pro
willngg said:
Sent from my LeTv 1 Pro using Tapatalk
Click to expand...
Click to collapse
i fix it
thanks a lot

System freezes when data connection switches to Edge
Hi All,
Using this ROM from BetaHydri, overall it works really good, however I have a problem that is getting annoying: whenever the phone switches to Edge from LTE/HSPA, the system freezes. As this can happen even in a staircase in an office building or on a train ride on the countryside it is rather vexing.
I have deleted the caches, but the issue persists.
Has anyone encountered the same problem maybe? Any ideas how to solve this?

Evaluation and some solutions
After some evaluation I can say this rom is really good.
There were some issues however:
I had sensors malfunctioning (gyro inverted). There is some discussion on this subject in Betahydri's developer thread, but I cannot post there as I'm considered a newbie by xda
Somehow the sensor calibration file (/persist/sensors/sns.reg) can get messed up. The trick is to delete the file, and on the next boot the system should replace it with the defaults, which are in /system/etc/sensors/sensor_def_qcomdev.conf. But this is not (always?) happening on this CM rom. What I did to resolve was to delete /persist/sensors/sns.reg, make a full TWRP backup, factory wipe, flash cuoco's 11s rom, start it, confirm if the gyro is working again, then restore the TWRP backup. Maybe there's a simpler way, but this worked.
I had a non-working notification LED. Wiping data in TWRP solved this, but I just had to find out what it was It turns out wiping the data of Settings Storage (com.android.providers.settings) was enough to restore the notification LED. The culprit is that there is a value in the settings.db of this component, in the system table called notification_light_pulse which was set to 0 somehow. Setting it to 1 with SQLite Editor (speed software) also solved the problem. There are more interesting values in this table by the way.
IR is not working, this is a known issue and I have no solution.
Double tap to wake does not work, at first I thought this would be a showstopper for me, but then I found out that with the Gravity Screen app, I can wake and sleep by using proximity and G sensors, which more than satisfies my needs for easy wake up and sleep.
OTG is not working natively, this can be overcome by third party apps like USB OTG helper. Could have something to do with fuse kernel modules not being available.
Volume level of ringer/notification is not calibrated, first step is already very loud and it doesn't change much if set higher. Does somebody now a solution for this?
I have dual SIMs and I could not switch one SIM to anything else than GSM only. Trick is to disable the other SIM, then set the network mode you want, and then re-enable the other SIM. There can be only one SIM for data, but somehow it wouldn't switch if the other SIM (that currently has the data) is still active.
If I find more, I'll post here.

Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby

chr0m said:
Getting pretty bad battery drain. I went from 100% to 60% in a few hours and I didn't even use the phone, it was just sitting on standby
Click to expand...
Click to collapse
You can try to see what is happening with OS Monitor (from play store) In settings, enable expert mode to see the native Linux processes, try to find the one that is eating the cpu. I had this once, it was some media indexer process that would not stop (can't remember the exact name).

xposed
Hi all,
Since i cannot post in ROM's thread, i will ask here for your help. I am having a hard time installing Xposed on BetaHydri-CollapseTweakV4.
I get an error while fashing Xposed Framework xposed-v86-sdk22-arm64:
<<Xposed version: 86
! Wrong platform: arm
! This file is for: arm64>>
So i successfully flashed the arm framework (for 32 bit), for afterwards to install XposedInstaller_3.0_alpha4. But now i am getting "Xposed Framework installed, but now active."
Any idea? Thanks.
Am I am on TRWP 3.0.2.0 by CUOCO92, coming from Le1PRO_US_X800-ROW-PB-v60-CUOCO92-5.5.014S.

Hi all
I've got the US version and I'm with 12.1 v4.
I got only edge on data sim (the other is one only for calls)
Any ideas as I can't select any options but GSM from the hidden menu in *#*#4636#*#*?
Is it OK if I flash 14s Cuoco now as I'm in 12.1?
---------- Post added at 02:42 PM ---------- Previous post was at 02:28 PM ----------
I just followed #slidetowipe and now I got LTE
T H A N K Y O U M A N ! ! !

It's interesting how the same phone works differently for different people... what I mean is that the GPS on my phone is very bad - it was bad from the very beginning with factory ROM, with MrRusch ROM, different versions, gps.conf tweaks, etc.... Now I am using an external bluetooth GPS receiver as the fix was painfully slow or non-existent. Some people report no such problems, how can that be, I wonder?

Now I use CM 12.1 V4 ROM from BetaHydri, But I found some bugs :
1. Error clock / alarm... If I choose setting or an alarm clock, appeared notification "unfortunately, clock has stopped"
2. IR isn't working
3. And I have a problem with the network 4G LTE, where the issue there is no on EUI ROM
Please help me to fix it.
To be honest I prefer premises EUI ROM if there is not malware and adware, Is there EUI ROM clean of Malware and adware?
If there are please help me to link from the ROM and the way instal rom, because I was new in using x800.
And I had experienced hard brick at instal couco92 14S.
Thanks

3g/4g also GSM not working

3g connection never connect, 4g sometimes connected but for seconds like ten seconds, i mean not stable, very unstable and very limited connection. Its so annoying. Any suggestions? Please help me.
My device info: mi 5s 4gb/32gb, miui 9.2.1.0 global stable.
Edit: gsm also isnt working well. Testing a couple things my friends and my family couldnt reaching me. Gsm signal indicator is showing full but not working properly.

What twrp version, from which rom did you switch to MIUI? And also what MIUI rom did you flash, EU MIUI, or official?

predragiPredrag said:
What twrp version, from which rom did you switch to MIUI? And also what MIUI rom did you flash, EU MIUI, or official?
Click to expand...
Click to collapse
Upgraded miui 9 from miui 8 with ota update, i mean all of it official and legal, but miui 9 has those connection problems. Also i didnt see those issues on miui forums or another platforms, is that only for me? Weird :/

feco86 said:
3g connection never connect, 4g sometimes connected but for seconds like ten seconds, i mean not stable, very unstable and very limited connection. Its so annoying. Any suggestions? Please help me.
My device info: mi 5s 4gb/32gb, miui 9.2.1.0 global stable.
Click to expand...
Click to collapse
Edit: adding screenshot.

Hmm that is infamous "stable" global beta rom... You cannot download it on official site, but you can only get it by OTA, and only selected users had that option.
My advice is to back up everything and do factory reset. It is not strange that something gets messed up while updating MIUI8 to MIU9..

predragiPredrag said:
Hmm that is infamous "stable" global beta rom... You cannot download it on official site, but you can only get it by OTA, and only selected users had that option.
My advice is to back up everything and do factory reset. It is not strange that something gets messed up while updating MIUI8 to MIU9..
Click to expand...
Click to collapse
I hate back uping, anyway ty for advice i hope those will solve.

feco86 said:
I hate back uping, anyway ty for advice i hope those will solve.
Click to expand...
Click to collapse
Or just wait for miui 9.5 in late April That one should solve all issues.

predragiPredrag said:
Or just wait for miui 9.5 in late April That one should solve all issues.
Click to expand...
Click to collapse
Ye ikr. :cyclops:

Solved.

MIUI 10 8.12.6 by Maps233 [12-12-2018]

[Mirror] - Download link: Maps_Rom_NX563J_MIUI10_8.12.6.zip
Source: https://bbs.nubia.cn/thread-1408995-1-1.html
Rom Info Translated
ROM Author: Maps233 (microblogging: Maps- cherish day time)
BUG submitted: HTTP: //weibo.com/maps233
Android Version: 8.1
ROM version: MIUI10 (8.12.6)
Updated: 2018-12-12
applicable models : Nubia Z17 (NX563J)
ROM size: 1.34GB
Click to expand...
Click to collapse
Attached below is the Google Installer that works for me

*Note* this is not my work I'm only mirroring it for people outside of China

Any informations about installation steps? It's multi language rom? This app, what's for?

surfer30 said:
Any informations about installation steps? It's multi language rom? This app, what's for?
Click to expand...
Click to collapse
The usual Wipe System, Data, and Dalvik/Art and Cache then flash and reboot.
I can't read some of the characters for the other languages but it has English and Chinese. And the attached apk is to install the Google services and Playstore.

Mobstergunz said:
*Note* this is not my work I'm only mirroring it for people outside of China
Click to expand...
Click to collapse
Is that a treble rom?

aljoscha81 said:
Is that a treble rom?
Click to expand...
Click to collapse
No it's a proper nx563j rom

I just flashed this room.
Steps:
1. Flash newest Nubia radio 5.52
2. Flash ROM.
My opinion
1. This isn't global rom, just China (few Chinese dialects and English)
2. I had problem with WiFi connection. Few times on a minutes lost.
3. Problem with magisk. I installed it but modulus was problem
Overall, very nice luncher, quick and light. But depends above points not for me.

surfer30 said:
I just flashed this room.
Steps:
1. Flash newest Nubia radio 5.52
2. Flash ROM.
My opinion
1. This isn't global rom, just China (few Chinese dialects and English)
2. I had problem with WiFi connection. Few times on a minutes lost.
3. Problem with magisk. I installed it but modulus was problem
Overall, very nice luncher, quick and light. But depends above points not for me.
Click to expand...
Click to collapse
For me the the only issues are the Wifi is toggled off after a reboot but I can turn it right back on. Magisk 18 works perfectly fine for me. I only used YouTube vanced and ablock tho. The Radio and all other necessary firmware is in the zip. And the Flashlight quick toggle doesn't work but using an app from the Playstore does work.
For me it's the most stable 8.0+ Rom that I like UI wise. The other Roms I tried keep crashing in the apps this one doesn't.

I use this rom about a week ago, and it's good, but I noticed some bugs:
- the battery is draining at night very fast (~20% in 8 hours), but I switch the network from 4G to 2G. MIUI
optimization is turned on in developer settings. I can't figured out what causes this.
UPDATE: Turning off and on the feature without restart fix this issue. I think the restart is turning off the optimization!
- VIBER calls are horrible, the sound is cracking and freezing
- the Magisk root is turned off daily, restart is fixed the problem (i use v18)
- I receive the fb messenger messages and e-mails ~10 minutes after sending, or when I open the app. (I tried to lock the apps to memory, but no success)
- Reading Mode isn't working
Can someone detected any of these?
Otherwise good work, thanks!
(sorry for my english)

[ROM][OFFICIAL] LineageOS 16.0 for S3NEO

Hi there,
If you haven't heard it already, we have official support now and Q is coming too.
links:
https://wiki.lineageos.org/devices/s3ve3gjv
https://wiki.lineageos.org/devices/s3ve3gxx
credits:
francescodario
me
LineageOS
Klte dev team (you guys rock)
Sources: www.github.com/LineageOS/android_device_samsung_s3ve3gxx

Deleted

Tested, works really well! Good job! Even the battery usage is great. It's smoother compared to 7.1.
As it's pointed out, Gapps breaks RIL. Everything else works except radio and offline charging. Installed Aurora Store and I'm pretty happy with it.
Things I tested:
☑ RIL
☑ Camera Front/Back
☑ Video Recording
☑ Bluetooth
☑ WiFi
☑ Sound
☑ GPS
☑ Calls
☒ Offline Charging, it loops.
☒ Radio, phone freezes.

@notfood
I can confirm your tests, but can you please test Videorecording with 1080p. For me the Video Quality (only with 1080p!) is low, becouse there are randomly White lines from the left to the right in the Video. (Like in all builds after 08/2018)

Humaxxx said:
@notfood
I can confirm your tests, but can you please test Videorecording with 1080p. For me the Video Quality (only with 1080p!) is low, becouse there are randomly White lines from the left to the right in the Video. (Like in all builds after 08/2018)
Click to expand...
Click to collapse
I see the white lines, they're sporadic but they're there only with 1080p.

HI
My findings so far: All things mentioned above are working for me as well, but with some exceptions:
GPS finds plenty of satelites, but doesn't snap in ( no position..).
Battery- charging freezes once, I had to reboot to go on.
In Whatsapp recorded video-sequences aren't playable ( frozen screen or artefacts..)
I couldn't find any menue to choose the touchscreen - triangles for moving the cursor in a text document.
I'm looking forward the next Version....:fingers-crossed:

Just tested this rom on my GT-I9301I for an hour or so and i have to say that auto-rotation doesn't work sometimes, also i don't know what exactly RIL is but i installed the gapps aroma (customized) and didn't realize any issue related to gapps until now, and also i got a new phone recently so the old phone doesn't have a sim card anymore, and i don't plan to put one on my GT-I9301I, so my old phone is somewhat like a test device now, i have tried some custom roms before but i didn't like them too much, this one doesn't look bad, except i wish you could do something about offline charging.

Error: this package is for device
Thank you for your contribution! I tried to flash it to my GT-I9301I with the help of TWRP 2.8.5.0 (I know its old, is there a better approach?). Before flashing i wiped everything, now when I try to install it from the sdcard it fails with the Error "E3004: This package is for device: s3ve3g, s3ve3gds, s3veg3gjv; this device is ." What am I doing wrong? Why is the installer not recognizing my device?

Koksnuss said:
Thank you for your contribution! I tried to flash it to my GT-I9301I with the help of TWRP 2.8.5.0 (I know its old, is there a better approach?). Before flashing i wiped everything, now when I try to install it from the sdcard it fails with the Error "E3004: This package is for device: s3ve3g, s3ve3gds, s3veg3gjv; this device is ." What am I doing wrong? Why is the installer not recognizing my device?
Click to expand...
Click to collapse
You have to use a newer Version of TWRP:
https://dl.twrp.me/s3ve3g/

I know this is only for the single sim variant, but would this work on a duos without ril at least? I don't really need ril that much right now.

JaadiBooti said:
I know this is only for the single sim variant, but would this work on a duos without ril at least? I don't really need ril that much right now.
Click to expand...
Click to collapse
Deleted

another useless ROM, we arrived at 10, or 15?

mariocaraf said:
another useless ROM, we arrived at 10, or 15?
Click to expand...
Click to collapse
Deleted

He didn't work he remained stuck
Please Help

Waiting for an edititon for Sony sensor! On Sony sensor not works camera and flashlight, but rom is usable as daily driver.
Auto-rotate is working in YT Vanced and other apps only sometimes.
This is very cool ROM, better than Nougat!

ayochan said:
He didn't work he remained stuck
Please Help
Click to expand...
Click to collapse
If it gets stuck, you are probably running an outdated firmware. Get the latest from Sammobile or check the Telegram group. You will need Odin or Heimdall to install it. Be careful which firmware you are burning, it can brick your device if it's the wrong one.

For more than an hour it is stuck in the installation screen

Humaxxx said:
You have to use a newer Version of TWRP
Click to expand...
Click to collapse
thanks, that worked perfect! I also like that encryption works

Just bought my a new Evo 860 ssd so I have enough storage for building multiple devices . So yes more build coming this week for Sony and dual SIM.
My 300gb ssd before didn't quite had enough.

Hi Thargorsson,
First of all. Excellent work on the new ROM!
I have just got a hold of 5x S3 NEO and wished they had a newer version than 4.4.2.
After some searches on Google I found this forum. I'm going to wait until you have an updated version of this ROM.
Please keep us all posted on any progress
Cheers,
Steve

[clark] Unofficial 18.1

It's that time of the year....
Recovery: download (6th Mar '21)
Gapps: download (16th Feb '21)
Lineage 18.1: download (8th Mar '21)
Please report stuff that doesn't work in this thread.
Update: 8th March
Recently fixed:
Bluetooth
Setting a lock screen
AUX / Line Out
Encryption
Gallery speed
Limitations of the current Lineage version:
VoLTE is disabled (will unfortunately not be able to fix that easily)
Dual SIM is not working (for devices that have Dual SIM)
Speakers do not sound as good as on stock
Camera is not as good as stock
Battery life when the screen is on is better on stock than on Lineage
------------
For developers:
device: https://review.lineageos.org/c/LineageOS/android_device_motorola_clark/+/304226/2
kernel: https://review.lineageos.org/c/LineageOS/android_kernel_motorola_msm8992/+/304218/1
vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/lineage-18.1
Note: Credits go to the usual lineage team from whom the device benefits enormously. Also the previous device maintainers have done a great job and we're still benefiting from that. E.g. the camera reverse engineering.

chrmhoffmann said:
It's that time of the year....
Recovery: download (16th Feb '21)
Gapps: download (16th Feb '21)
Lineage 18.1: download (16th Feb '21)
Please report stuff that doesn't work in this thread.
------------
For developers:
device: https://review.lineageos.org/c/LineageOS/android_device_motorola_clark/+/304226/2
kernel: https://review.lineageos.org/c/LineageOS/android_kernel_motorola_msm8992/+/304218/1
vendor: https://github.com/chrmhoffmann/proprietary_vendor_motorola/tree/lineage-18.1
Click to expand...
Click to collapse
Hello Chris, first of all, thanks for continuing on 18.1. I installed the rom and it booted fine. The set-up was buggy and laggy an kept crashing on setting up screen pattern. So I can't set screen pattern/pincode/password. Also I installed some apps from play store like whatsapp,gmail, telegram and they are doing fine. The phone gets hot and battery drains fast. Ambient display is a bit buggy, it's not working everytime. Anyways for the first build it's quite good. Thanks again
Maybe anybody else can also test?

Yes, setting up lock screen is broken. Will fix it in next build.
Chris

!

[QUOTE = "chrmhoffmann, post: 84511557, member: 361777"]
Да, не работает настройка экрана блокировки. Исправлю в следующей сборке.
Крис
[/ ЦИТИРОВАТЬ]
Dear Chris, everything is superb, but the function of broadcasting the screen in the quick settings menu does not work when connected (miracast) the phone is overloaded

I think bluetooth headsets are broken.
Chris

chrmhoffmann said:
I think bluetooth headsets are broken.
Chris
Click to expand...
Click to collapse
I can confirm that, it connects with my Haylou GT1 Pro but no sound.

Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!

chrmhoffmann said:
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
Click to expand...
Click to collapse
Thank you Chris, bluetooth and screen lock are fixed!

chrmhoffmann said:
Fixed. Uploading new build that fixes bluetooth and screen lock.
Note: If you have previously tried to setup lock screen, you will have to reset device (factory reset/wipe). Otherwise the device will crash right after bootanim stops. Sorry for that!!!
Click to expand...
Click to collapse
Can it be dirty flashed or should we do a clean install? It's cumbersome working with LOS recovery so the less I have to deal with it the better. Other than recovery it's a nice smooth rom. Thanks again

Wheels564 said:
Can it be dirty flashed or should we do a clean install? It's cumbersome working with LOS recovery so the less I have to deal with it the better. Other than recovery it's a nice smooth rom. Thanks again
Click to expand...
Click to collapse
I did a clean install, you can try dirty flash.

moviefirst said:
I did a clean install, you can try dirty flash.
Click to expand...
Click to collapse
I did a clean install. Since I have two of these phones I'm using this one for testing purposes for now and have 14.1 on the other one for daily use. At some point I'll change over to the 18.1 phone. I really like that dark theme is enabled on this rom that 14.1 never had It helps save battery.

which version of magisk will work?

Could someone test Netflix?

chrmhoffmann said:
Could someone test Netflix?
Click to expand...
Click to collapse
Seems to work fine in the U.S. on wifi. I'll let it run for a while to make sure it's stable. It appears to be running 1080p.

chrmhoffmann said:
Could someone test Netflix?
Click to expand...
Click to collapse
Netflix working here in the Netherlands, but the phone is lagging and takes time to open apps. Also I think battery was better in 17.1

In the camera I've noticed there's no icon to save to sdcard. also unless they've change snap camera I can't get the back or home button to come up to exit camera. I have to long press the power button to get access to home icon.

[email protected] said:
which version of magisk will work?
Click to expand...
Click to collapse
Latest version 21.4 works.
Wheels564 said:
In the camera I've noticed there's no icon to save to sdcard. also unless they've change snap camera I can't get the back or home button to come up to exit camera. I have to long press the power button to get access to home icon.
Click to expand...
Click to collapse
.
Swipe down from top to see home button. Save to sd card did not work on 17.1 so he removed the icon. Thanks for helping me find new forum!
Link to gapps is not working here.
Sorry for partial reposting this from 17.1 forum. Seems very functional on WiFi. Phone does not read VZW SIM on boot and can't pick up APN. I had to choose VZWINTERNET APN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works. If LTE worked I think we would be golden.
Also get "DM config update keeps stopping" error. Not sure if this is related to SIM. I used NikGapps but don't think it is related.
Photos can not access SD card but Files has no problem. Edit. My bad. Photos works fine.

kb8no said:
Latest version 21.4 works.
.
Swipe down from top to see home button. Save to sd card did not work on 17.1 so he removed the icon. Thanks for helping me find new forum!
Link to gapps is not working here.
Sorry for partial reposting this from 17.1 forum. Seems very functional on WiFi. Phone does not read VZW SIM on boot and can't pick up APN. I had to choose VZWINTERNET VPN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works. If LTE worked I think we would be golden.
Also get "DM config update keeps stopping" error. Not sure if this is related to SIM. I used NikGapps but don't think it is related.
Photos can not access SD card but Files has no problem.
Click to expand...
Click to collapse
Get a logcat when your trying to use LTE for Chris. I don't have a sim in my 18.1 phone or I would.

Link to MindTheGapps from OP is obsolete and updated link found on LOS link. I used NikGapps before and started over with clean flash using MindTheGapps but found it made no difference. Phone still does not read VZW SIM on boot and can't pick up APN. I had to again manually choose VZWINTERNET APN. Then LTE works for 30 seconds. Data drops for maybe a minute, then falls back to 3G which works and I get about 2 Mbps. Continue to get error "DM config update keeps stopping". I now believe this is related.
Has anybody yet tried TWRP from 17.1 thread?
Advanced restart is missing from developer options.
Addendum: I put in my ATT SIM. It found the APN and imported it correctly. It started LTE and similarly died. Data never came back at a lower rate.