Related
Hello all
Official CM 12.1 nightlies based on Android Lollipop 5.1.1 for Find 7A/S have been officially released effective 22nd April 2015. Its time to thank the entire CyanogenMod Team and @[U]jajb[/U] for their efforts in the development and encourage them to keep supporting us the same way in the future.
Let the flashing go on!!!!:highfive:
Nightly Downloads
CM12.1 Find 7A
http://download.cyanogenmod.org/?device=find7
CM12.1 Find 7S (QHD)
http://download.cyanogenmod.org/?device=find7s
5.1 Minimal Gapps (for a light and blazzing fast experience):highfive:
https://www.androidfilehost.com/?fid=95916177934550851
Installation Instructions
Coming from 5.0 or less ROMS
Download cm-12.1-xxxxxxxx-NIGHTLY-find7x.zip to your sdcard
Boot into Recovery
Wipe data, cache & dalvik cache
Flash cm-12.1-xxxxxxxx-NIGHTLY-find7x.zip from sdcard
Flash 5.1 Minimal GApps.zip from sdcard
Reboot:highfive:
Coming from previous CM 12.1 build
Wipe cache & dalvik cache
Flash cm-12.1-xxxxxxxx-NIGHTLY-find7x.zip from sdcard
Reboot:highfive:
Somebody successfully flashed it ? It works ?
raber111 said:
Somebody successfully flashed it ? It works ?
Click to expand...
Click to collapse
It doesn't work. http://forum.xda-developers.com/showpost.php?p=58255547&postcount=397
I tried to flash the last CM11 build and I'm still stucked there.
Anyone tried 20150119 build yet? is it working??
CyanPile said:
Anyone tried 20150119 build yet? is it working??
Click to expand...
Click to collapse
It seems so, but wifi is terribly slow.
It's going to be announced soon in CM's blog, but find7a and find7s are split now and get separate builds. You need to flash "find7" on find7a devices and "find7s" on find7s qhd devices. You should update the recovery too, but I think there are no recovery images available yet. I might provide some if nobody else does it.
I successfully flashed cm 12 1901 build . WiFi works normally. Fonts and icons too small
on 2.0.4
Can we flash this on color os 2.0.4 version without any issues or have to downgrade to 1.2.7
sheraz1015 said:
Can we flash this on color os 2.0.4 version without any issues or have to downgrade to 1.2.7
Click to expand...
Click to collapse
You will have to flash it over 1.2.x Color OS. I flashed 19 build over 1.2.7.
Installed without an issue.
For QHD use Find 7s version.
mikeioannina said:
It's going to be announced soon in CM's blog, but find7a and find7s are split now and get separate builds. You need to flash "find7" on find7a devices and "find7s" on find7s qhd devices. You should update the recovery too, but I think there are no recovery images available yet. I might provide some if nobody else does it.
Click to expand...
Click to collapse
Thank for your
help and shall flash it.
Its there any way to backup imei of oppo find 7
ganeshbiyer said:
You will have to flash it over 1.2.x Color OS. I flashed 19 build over 1.2.7.
Installed without an issue.
For QHD use Find 7s version.
Click to expand...
Click to collapse
Sent from my LG-D802 using XDA Premium 4 mobile app
You can always use tantrums recovery flasher...they recently updated to v10.....has all the latest recoveries
Anyone having problems when using unified partition layout? After I flashed the ROM the phone just tells me that there's an encryption error and I have to wipe data. I wiped data and still the same error. When I went back to previous ROM I'm using everything else is fine, except with the proximity sensor bug. Cheers
darthbadar said:
Anyone having problems when using unified partition layout? After I flashed the ROM the phone just tells me that there's an encryption error and I have to wipe data. I wiped data and still the same error. When I went back to previous ROM I'm using everything else is fine, except with the proximity sensor bug. Cheers
Click to expand...
Click to collapse
De-unify first, then flash. You need to have to revert back to 1.2.x.
Flash Open TWRP and then flash CM12 Nightlies. COs 1.2.x and CM12 do not support Unification.
ganeshbiyer said:
De-unify first, then flash. You need to have to revert back to 1.2.x.
Flash Open TWRP and then flash CM12 Nightlies. COs 1.2.x and CM12 do not support Unification.
Click to expand...
Click to collapse
Soo, there's no way I'm using CM12 Nightlies with unified storage? Thanks for answering man. :highfive:
Changelog ?
changelog here http://www.cmxlog.com/12/find7/
and here http://www.cmxlog.com/12/find7s/
Chrome
Is the only way to switch between tabs the recent apps thingy? I mean I don't habe a problem but still kinda awkward not knowing where the tab went. BTW I got twrp 2.8.4 and there's always this horizontal line where the display shifts. It's like these lines on old videos that walk through the picture. Trying my best on English (I'm German )
alex1.salge said:
Is the only way to switch between tabs the recent apps thingy? I mean I don't habe a problem but still kinda awkward not knowing where the tab went. BTW I got twrp 2.8.4 and there's always this horizontal line where the display shifts. It's like these lines on old videos that walk through the picture. Trying my best on English (I'm German )
Click to expand...
Click to collapse
Regarding the line in recovery, use Nameless TWRP recovery from HERE.
I have not tried the latest TWRP Open Recovery 2.8.4 for Find7, but with Nameless TWRP Recovery, I am able to use OTG in recovery. This allows me to take backups into 32gb usb drive and restore from there.
Custom Ringtones
Hello Just flashed to build 2015/01/21 and I noticed that I was unable to change my ringtone. This may seem like a trivial thing but I would just like to know if it's my device specific. Find 7a running CM12 stock kernels and all.
Edit: Turned off NuPlayer in developers options and set SELinux Kernel to Permissive.
Enyioha said:
Hello Just flashed to build 2015/01/21 and I noticed that I was unable to change my ringtone. This may seem like a trivial thing but I would just like to know if it's my device specific. Find 7a running CM12 stock kernels and all.
Edit: Turned off NuPlayer in developers options and set SELinux Kernel to Permissive.
Click to expand...
Click to collapse
sorry for noob question
how can I change SELinux Kernel to Permissive ?
Missing languages
In the 21/01 build, some languages are missing - texts simply do not appear and the language list is empty near the end.
EDIT:
23/01 build solves it.
EDIT2:
Gyro doesn't work, screen doesn't rotate.
I just got a Find 7(s) X9076 and wanted to install CyanogenMod.
If I take one of the official download page (which are all CM 13) the screen shows everything in wrong colors.
I think (so far I read this from the other threads) it's because of a new displaypanel.
Is there any CM that is working for this display?
What is the problem with this panel, when can I install from official CM-Page?
Best regards
gragib
gragib said:
I just got a Find 7(s) X9076 and wanted to install CyanogenMod.
If I take one of the official download page (which are all CM 13) the screen shows everything in wrong colors.
I think (so far I read this from the other threads) it's because of a new displaypanel.
Is there any CM that is working for this display?
What is the problem with this panel, when can I install from official CM-Page?
Best regards
gragib
Click to expand...
Click to collapse
Hi there! I think your best bet is to go and try omnirom either 5.1.1 or 6.0.1 whichever suits your taste.
Currently im running omnirom 6.0.1 on the new panel similar as you and it is absolutely great! I suggest that you should go and try it out.
Cheers!
DingleBell said:
Hi there! I think your best bet is to go and try omnirom either 5.1.1 or 6.0.1 whichever suits your taste.
Currently im running omnirom 6.0.1 on the new panel similar as you and it is absolutely great! I suggest that you should go and try it out.
Cheers!
Click to expand...
Click to collapse
Suscribe, i run omni 6.0.1 and it works like a charm, everything runs fine and fast, great work from Maxwen, thanks man.
roi_xordo said:
Suscribe, i run omni 6.0.1 and it works like a charm, everything runs fine and fast, great work from Maxwen, thanks man.
Click to expand...
Click to collapse
Yeah.. As of right now, Maxwen omnirom 6.0.1 is the best rom for the newer type of lcd panel. Im using it as a daily driver and had not encountered any problems.
Big shoutout and cheers to Maxwen for the rom. :good:
Many THX for all replies!
I have now the omnirom 5.1.1 installed and its running very well.
New LCD + OmniRom = BSoD > Random Reboots // + Spectrum = Random Reboots
Hi guys
I really feel bad when i read your comments, and notice that you all succeed to get OmniRom runing smoothly.
I'm facing random reboots while using Omnirom (Spectrum also) with X9076 new LCD panel, and it get worst when it's charging.
Do anyone know how to solve this problem.
I already tried clean install by flashing last Spectrum (to get latest Modem & Firmware) then wiped all and flashed Omnirom 5.1.1/6.0.1, but it doesn't work
Also i saw somewhere that it will be good to reflash everything step by step so i flashed starting by ColorOS 1.2.9 then 2.0.8 then 2.1.5 then OmniROM but random reboots still occur.
Please guys help me, i cannot stand that anymore.
Hi, which recovery do you use? I flash omni (both versions) with TWRP (full wipes dalvik, cache, etc) and no issues, everything works fine, no bsod's, no reboots...
Cheers
roi_xordo said:
Hi, which recovery do you use? I flash omni (both versions) with TWRP (full wipes dalvik, cache, etc) and no issues, everything works fine, no bsod's, no reboots...
Cheers
Click to expand...
Click to collapse
I'm using TWRP 2.8.7.2 to flash OmniRom, I wipe all (Cache, Dalvik, Internal, System, Data) i only keep raw partitions (to not lose LVM)
otmanes1 said:
I'm using TWRP 2.8.7.2 to flash OmniRom, I wipe all (Cache, Dalvik, Internal, System, Data) i only keep raw partitions (to not lose LVM)
Click to expand...
Click to collapse
I dont understand it mate, we have the same phone (x9076 + r63419 Panel) and the same recovery (2.8.7.2), but in my case this roms works great (5.1.1 and 6.0.1, both roms works fine)
Did you try to format data? Backup what you need and in the wipe menu, instead of wipe, try to format data, then flash the rom, the gapps, and wipe dalvik cache only before reboot. I dont know if this will work to you, but is the only thing I can think of...
I tried Spectrum rom too, and except for the known issues (camera, gps icon, etc..), everything else works right, no bsods, no reboots...
Good luck
gragib said:
I just got a Find 7(s) X9076 and wanted to install CyanogenMod.
If I take one of the official download page (which are all CM 13) the screen shows everything in wrong colors.
I think (so far I read this from the other threads) it's because of a new displaypanel.
Is there any CM that is working for this display?
What is the problem with this panel, when can I install from official CM-Page?
Best regards
gragib
Click to expand...
Click to collapse
this will work on new screen display
http://pan.baidu.com/s/1gevNd1D#path=%2FOPPO%20Find%207%2FCM12.1-Find7
QTeknology said:
this will work on new screen display
http://pan.baidu.com/s/1gevNd1D#path=%2FOPPO%20Find%207%2FCM12.1-Find7
Click to expand...
Click to collapse
Hi. Can you confirm that version works in panel R63419? I tried soooo many nightlies from cyanogen and so many other roms with cyanogen based and no one works...
roi_xordo said:
Hi. Can you confirm that version works in panel R63419? I tried soooo many nightlies from cyanogen and so many other roms with cyanogen based and no one works...
Click to expand...
Click to collapse
Tried It ?
Inviato dal mio Find7 utilizzando Tapatalk
QTeknology said:
Tried It ?
Inviato dal mio Find7 utilizzando Tapatalk
Click to expand...
Click to collapse
No i dont, i dont like to waste my time... i am sure that no one ROM based in cyanogen will work whit our panel. Try Omnirom, is the best ROM for the find 7
roi_xordo said:
No i dont, i dont like to waste my time... i am sure that no one ROM based in cyanogen will work whit our panel. Try Omnirom, is the best ROM for the find 7
Click to expand...
Click to collapse
that link is from wuxianlin, the best developer for find7 and oneplus.
It's a special version of cm12.1 released unofficially later the end of cm12.1 for find7 and it's for new panel.
I don't waste my time too, I have older panel so I don't have reason to flash It.
Hello so I am still loving every bit of my zenfone 2 and all but the rom I am using is no longer being updated as the OP no longer has the device I was wondering what the users here suggest I like blisspop rom but I don't like that the camera just looks bad in stock gaps app and the zenfone 2 app by asus looks so good in comparison I know there is a sorta ported camera app for cyanogen based roms and all but every time I use that it seems to crash the app for some reason.
Thanks for the help also is there still a app compatibility issue on the cyanogen zenfone 2? Sorry again just returning after about 7 months with the same rom on my phone.
Currently on: Prism Barebone V12.5
Zenfone 2 4G version
I highly recommend Echoe Zen Rom. It's currently the best out there for me.
mastermarkofroms said:
Hello so I am still loving every bit of my zenfone 2 and all but the rom I am using is no longer being updated as the OP no longer has the device I was wondering what the users here suggest I like blisspop rom but I don't like that the camera just looks bad in stock gaps app and the zenfone 2 app by asus looks so good in comparison I know there is a sorta ported camera app for cyanogen based roms and all but every time I use that it seems to crash the app for some reason.
Thanks for the help also is there still a app compatibility issue on the cyanogen zenfone 2? Sorry again just returning after about 7 months with the same rom on my phone.
Currently on: Prism Barebone V12.5
Zenfone 2 4G version
Click to expand...
Click to collapse
Back up everything and move to either Stock CM 13 or CM 12.1, I prefer CM 13 as it is performing much better than CM 12.1. Yeah I agree Google Camera/ CM camera are not as good as Asus Camera or at least doesn't have too many options, but hey there is always play store where you can download other 3rd party camera apps. If you can cope with that, I think CM 13 is the best option.
Sayan44 said:
Back up everything and move to either Stock CM 13 or CM 12.1, I prefer CM 13 as it is performing much better than CM 12.1. Yeah I agree Google Camera/ CM camera are not as good as Asus Camera or at least doesn't have too many options, but hey there is always play store where you can download other 3rd party camera apps. If you can cope with that, I think CM 13 is the best option.
Click to expand...
Click to collapse
I have decided on blisspop 6.1 PS any ideas for camera? I find for some reason the google camera app has way to much static compared to stock asus camera app.
Why don't you stick with Barebone v 12.5 until official MM arrives? Do you experience any issues/bugs?
I am currently on V12.5 with xposed + amplify, removed few more apps and with BORETS24's kernel. The device runs smooth and I get around 5hrs SOT (battery lasting 2 full days). And I have everything enabled (data, wifi, location..).
I tried Echoe's rom but it just has too much bloatware for me. I installed it, wasted 2 hours setting it up and deleting useless stuff only to realise that it is not as responsive as Prism's Barebone v12.5. So I'm sticking with v12.5 even though it wont be updated anymore.
If it aint broke, don't fix it!
pecholino said:
Why don't you stick with Barebone v 12.5 until official MM arrives? Do you experience any issues/bugs?
I am currently on V12.5 with xposed + amplify, removed few more apps and with BORETS24's kernel. The device runs smooth and I get around 5hrs SOT (battery lasting 2 full days). And I have everything enabled (data, wifi, location..).
I tried Echoe's rom but it just has too much bloatware for me. I installed it, wasted 2 hours setting it up and deleting useless stuff only to realise that it is not as responsive as Prism's Barebone v12.5. So I'm sticking with v12.5 even though it wont be updated anymore.
If it aint broke, don't fix it!
Click to expand...
Click to collapse
I switched because well as much as I love a stock asus based rom my issue is I want more themeing options and Asus just dont have and I don't think will offer 3rd party again besides I do love some of the AOSP roms out there like blisspop but I am now expirenceing an issue with my phone This is before I even opted to install blisspop as I have not done it yet for some reason I am able to access TWRP through adb reboot recovery on windows but I can't access my bootloader using the power and volume down or adb reboot bootloader and I am not sure why at the moment. I like my phone like I like my linux pc with themeing options
Edit: Flashing blisspop 6.0.1 did not fix my bootloader issue and I also tried flashing the boot.img manually
mastermarkofroms said:
I switched because well as much as I love a stock asus based rom my issue is I want more themeing options and Asus just dont have and I don't think will offer 3rd party again besides I do love some of the AOSP roms out there like blisspop but I am now expirenceing an issue with my phone This is before I even opted to install blisspop as I have not done it yet for some reason I am able to access TWRP through adb reboot recovery on windows but I can't access my bootloader using the power and volume down or adb reboot bootloader and I am not sure why at the moment. I like my phone like I like my linux pc with themeing options
Edit: Flashing blisspop 6.0.1 did not fix my bootloader issue and I also tried flashing the boot.img manually
Click to expand...
Click to collapse
i guess you mean, that power + VOL-UP didn't work right? if you were pressing VOL-DOWN, try VOL-UP
pecholino said:
i guess you mean, that power + VOL-UP didn't work right? if you were pressing VOL-DOWN, try VOL-UP
Click to expand...
Click to collapse
Yeah sorry I meant up and it still dont work I can only access recovery but through adb if I try and load the bootloader the asus logo just sits there and after like a minute the phone reboots and sists on asus logo again if I turn off device manually and turn it on normal the phone turns on so I am not 100% sure what is going on its really weird
Latest update: 2016-10-27 To view a changelog, you can visit http://www.cmxlog.com/13/quark/ for a rough idea up to the build date.
Hi all. I was able to compile this stock build of CM 13.0 thanks to the efforts/hard works of Skrilax_CZ, baybutcher27, the folks who created Resurrection Rom Remix, and those over at CyanogenMod. It takes some minor features from Resurrection Rom apparently (i.e. notification light, some tiny performance/battery tweaks, and the ability to install Motorola apps). It is otherwise stock CM 13 and I use this daily. I and the other authors/devs assume no responsibility if you damage your device somehow.
Please don't feel pressured to update any more often than you wish .
Notes:
In order to make my calling work for Verizon, I had to go under Settings->Cellular networks->Preferred network type, and select LTE/CDMA (not LTE/GSM/UMTS). I assume GSM users should be fine with the defaults.
My recommendations to install:
Install TWRP 3.0.2 if you haven't already: http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
Perform a backup of your current system/ROM (not really needed if just flashing a newer version).
Perform a factory reset/wipe (if coming from another ROM). If not coming from another ROM, still safest to do a dalvik/art cache reset.
Install the .zip
Install the appropriate google apps (http://opengapps.org/ , ARM, 6.0). I would think nano or micro is best.
(Optional) Install a custom kernel. The best at the time of this writing are at:
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526 (CM-NX-RR-M builds for Marshmallow)
The latest is here: https://www.androidfilehost.com/?w=files&flid=50122
Wipe dalvik/art cache if you install another kernel.
Reboot and enjoy
Kernel Adiutor is very good for performance/power saving adjustments:
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
If you are using bhb27 kernels, then you should use his version of Kernel Adiutor:
https://www.androidfilehost.com/?w=files&flid=48767
Here is the link to the latest ROM on the hosting website:
[2016-10-27]https://www.androidfilehost.com/?fid=457095661767104611
Previous Builds:
https://www.androidfilehost.com/?w=files&flid=52716&sort_by=date&sort_dir=DESC
I'll be back to post updates fairly regularly (~every 1-2 weeks), but I also work full time in addition to being a Dad (those of you who are know how that is ) and won't really be able to response to PMs very well. The sources I used can be found under the post on XDA here at http://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-t3316232 (device, vendor, and kernel trees). Thanks and God bless.
I just flash this version and its absolutely amazing.
Good job devs!
Bugs I noticed:
-Settings for LED doesn't work.
-Android Auto says is not a supported device.
-Quick Charge 2.0 doesn't seems to work.
-Phone gets really hot when charging.
-...
I have been tempted to flash this all day, but I love how smooth my phone has been on resurrection remix and I enjoy the extra customizations it has. I'm eagerly awaiting the next resurrection remix build for all the latest git changes
emi.guego said:
Bugs I noticed:
-Settings for LED doesn't work.
-Android Auto says is not a supported device.
-Quick Charge 2.0 doesn't seems to work.
-Phone gets really hot when charging.
-...
Click to expand...
Click to collapse
That's a bummer with some of those bugs. Hopefully those will be taken care of soon and I'll be able to sync and rebuild. Did all of these happen to be with the stock kernel, or did you happen to flash another (like baybutchers)? I've seen a few specific to the tiles, but I dont have an Android Auto system to check against. Also, if they are working (or some) in resurrection then I could possibly try to patch this.
calsurferpunk said:
That's a bummer with some of those bugs. Hopefully those will be taken care of soon and I'll be able to sync and rebuild. Did all of these happen to be with the stock kernel, or did you happen to flash another (like baybutchers)? I've seen a few specific to the tiles, but I dont have an Android Auto system to check against. Also, if they are working (or some) in resurrection then I could possibly try to patch this.
Click to expand...
Click to collapse
I don't know exactly, I installed it by downloading the zip and gapps to my PC and used the ADB sideload, before that I was using the last nightly of CM12.1. I did that and I didn't loose my info (either way I did a TWRP backup of everything, except cache previously), so I think it was the CM kernel. When I installed for the first time CM I flashed also the zip and gapps, if that way the stock kernel is changed with the CM kernel I think I'm using CM kernel.
emi.guego said:
I don't know exactly, I installed it by downloading the zip and gapps to my PC and used the ADB sideload, before that I was using the last nightly of CM12.1. I did that and I didn't loose my info (either way I did a TWRP backup of everything, except cache previously), so I think it was the CM kernel. When I installed for the first time CM I flashed also the zip and gapps, if that way the stock kernel is changed with the CM kernel I think I'm using CM kernel.
Click to expand...
Click to collapse
Yeah that sounds like the stock cm kernel then if you didn't flash anything like that separately. I don't know if it would help, but you could always try the other kernel I posted about and see if Android Auto works (would have to restore your backup if you didn't want to keep it). It just depends how much you care and if it's worth staying with the ROM to you. There's obviously bound to be some bugs, but I enjoy using a lean version of the latest and greatest system. Thanks for the feedback .
Installed it 2h ago, everything is running fine so far.
This is smoother than the old cm and than rr too. I'm impressed!
I'm using Bhb Kernel.
My phone is turbo charging, led is working...
No bugs for me.
Nice job, mate! I'm glad we got a new cyanogenmod that we can have updates. Keep strong!
Enviado de meu Moto MAXX usando Tapatalk
thanks,
hope bat drain @ standby will be best from rom's i tested.
somebody can advice what app use to get best standby time? im using Purify but i think it doesnt help much. also on mostly rom'z even when battery mode is set to eco that doesnt help much
Maro' said:
thanks,
hope bat drain @ standby will be best from rom's i tested.
somebody can advice what app use to get best standby time? im using Purify but i think it doesnt help much. also on mostly rom'z even when battery mode is set to eco that doesnt help much
Click to expand...
Click to collapse
I've just been going under the built in privacy guard and setting advanced permissions to where apps I don't need to start at boot are denied, in addition to also denying a lot of them from being allowed to keep the device awake. I get very little battery drain in standby this way. If the cell signal is too weak though, it's really hard to prevent extra drain as it over compensates to get a good signal.
Updated ROM to CyanogenMod 13 changes as of March 24.
calsurferpunk said:
Updated ROM to changes as of March 24.
Click to expand...
Click to collapse
Changelog?
Debuffer said:
Changelog?
Click to expand...
Click to collapse
It's a little hard to say since there is a lot and I am just syncing to the main CyanogenMod 13 repository. However, this is a good link if you go by the date and something similar (such as the Nexus 6 which shares a lot of hardware).
http://www.cmxlog.com/13/shamu/
This may be a dumb question but does this have VoLTE enabled and working(Verizon user)? Since it is CyanogenMod based I assume not but just waned to ask.
calsurferpunk, can you fix wifi on XT1254 with stock Brasil 1225's 6.0.1 ROM? CM12.1 and CM13 detect Moto Maxx and Droid Turbo radio very good!
*GPS*
working for U guys? For me not (BB kernel, location: Europe)
soccertolive said:
This may be a dumb question but does this have VoLTE enabled and working(Verizon user)? Since it is CyanogenMod based I assume not but just waned to ask.
Click to expand...
Click to collapse
Your assumption is correct. I don't believe this has ever worked with CyanogenMod. I'm on Verizon and haven't seen it.
Maro' said:
*GPS*
working for U guys? For me not (BB kernel, location: Europe)
Click to expand...
Click to collapse
I had this problem on other ROMs as well until I restored the original manufacturer ROM, set GPS to device only, verified it worked, then flashed the new ROM. You might have to do the same here. I believe it's been a long ongoing bug with CyanogenMod (and probably others).
pretty thx for the cm13,did it have ambient display?
I am downloading this at work right now. It is slow and will take me a couple to download.
While it is dl'g, I have a question about wiping. Do I still need to do a factory reset if I am coming from a marshmallow cm13 RR rom?Baybutchers?
Also, I have not been able to get my GPS to work properly. In your post #17, you referred to original manufacturer rom. Where can I get this rom to set the gps? I do have computerfreek's room saved as a backup if I could use it? I don't have easy access to a computer to do a fastboot.
Thx.
Sent from my DROID Turbo using Tapatalk
Wait, ROM was updated to day 24?
Seems that there are DU builds for the HTC 10 (pme). Here: https://download.dirtyunicorns.com/pme/
Has anyone tried them? If yes, what are your impressions? :laugh:
errikosd said:
Seems that there are DU builds for the HTC 10 (pme). Here: https://download.dirtyunicorns.com/pme/
Has anyone tried them? If yes, what are your impressions? :laugh:
Click to expand...
Click to collapse
It is AOSP based compared to LOS (CM) which the majority of the ROMs posted are.
DU is a great ROM. I found that it lacked some important features that I like, but a very solid ROM.
Yes i tried on Sprint but there was no data...even after entering the apn in
errikosd said:
Seems that there are DU builds for the HTC 10 (pme). Here: https://download.dirtyunicorns.com/pme/
Has anyone tried them? If yes, what are your impressions? :laugh:
Click to expand...
Click to collapse
Encryption was not working, even with a full data format prior to flashing.
Any other opinions?
I have been running the weekly and official builds with nebula eas kernel for about 5 weeks or so. I personally feel its the best non-sense based ROM for my usage. It does lack some customisations most others have but makes up for it by being super stable, fast, battery friendly and just works as its supposed to with bull. I use superSU, substratum and A.R.I.S.E audio mod with selinux permissive without dramas.
mrrflagg said:
I have been running the weekly and official builds with nebula eas kernel for about 5 weeks or so. I personally feel its the best non-sense based ROM for my usage. It does lack some customisations most others have but makes up for it by being super stable, fast, battery friendly and just works as its supposed to with bull. I use superSU, substratum and A.R.I.S.E audio mod with selinux permissive without dramas.
Click to expand...
Click to collapse
Does it come with root or Magisk out of the box?
To reverse the question, can I use it as clean Android without root, passing SafetyNet? Thanks!
errikosd said:
Does it come with root or Magisk out of the box?
To reverse the question, can I use it as clean Android without root, passing SafetyNet? Thanks!
Click to expand...
Click to collapse
It comes WITHOUT root. So you can choose your preffered method or no root at all.
I don't know about safetynet as I am not using android pay or anything that relies on it to pass.
Also I have not had any encryption issues as someone earlier replied
mrrflagg said:
I have been running the weekly and official builds with nebula eas kernel for about 5 weeks or so. I personally feel its the best non-sense based ROM for my usage. It does lack some customisations most others have but makes up for it by being super stable, fast, battery friendly and just works as its supposed to with bull. I use superSU, substratum and A.R.I.S.E audio mod with selinux permissive without dramas.
Click to expand...
Click to collapse
What firmware and TWRP Version are you using with it ? With the Nougat firmware and latest TWRP, I get the encryption issue..
Scutariu said:
What firmware and TWRP Version are you using with it ? With the Nougat firmware and latest TWRP, I get the encryption issue..
Click to expand...
Click to collapse
401.4 FW and 3.1.0 TWRP. What kind of encryption issue? I did have once only rebooted into recovery and it asked for the password but I just rebooted in recovery from TWRP and it never happened again.
mrrflagg said:
401.4 FW and 3.1.0 TWRP. What kind of encryption issue? I did have once only rebooted into recovery and it asked for the password but I just rebooted in recovery from TWRP and it never happened again.
Click to expand...
Click to collapse
I've tried several combinations, with older/latest firmware.
Every time, It would ask for the encryption password on bootup.
Even if I haven't set one up.. With data format prior to installing
Anyway, got sick of re-setting apps on my phone, just installed Maximus HD ROM, and that's that ?
Dirty Unicorns
errikosd said:
Seems that there are DU builds for the HTC 10 (pme). Here: https://download.dirtyunicorns.com/pme/
Has anyone tried them? If yes, what are your impressions? :laugh:
Click to expand...
Click to collapse
The 4-8-17 build is Android 7.1.2 and so far it is running really well. I am surprised that there is not a thread in the ROM section for DU.
morr22066 said:
The 4-8-17 build is Android 7.1.2 and so far it is running really well. I am surprised that there is not a thread in the ROM section for DU.
Click to expand...
Click to collapse
I think it was the DU team's decision to close all and not allow any XDA threads. Someone correct me if I am wrong.
No idea why though.
morr22066 said:
The 4-8-17 build is Android 7.1.2 and so far it is running really well. I am surprised that there is not a thread in the ROM section for DU.
Click to expand...
Click to collapse
A quick question.
What variant , firmware and TWRP are you using?
Everytime I try that rom..it encrypts itself with an unknown password, and upon restart I'm unable to access my phone
Encryption
Scutariu said:
A quick question.
What variant , firmware and TWRP are you using?
Everytime I try that rom..it encrypts itself with an unknown password, and upon restart I'm unable to access my phone
Click to expand...
Click to collapse
I have had that happen when switching from a sense based ROM to LOS or AOSP and it's a "pita"... Anything that I want to keep gets moved to my SD card before I reboot to recovery.
I read through several threads and tried several possible solutions so I can't remember exactly which one worked.
I am currently on Verizon, official Nougat with the flashed us unlocked "patch", TWRP 3.1.0-1. If you are on Verizon or Sprint you need to patch the image with a missing image that is found in the us unlocked model (there are threads discussing it where you can find the file).
LOS
Scutariu said:
A quick question.
What variant , firmware and TWRP are you using?
Everytime I try that rom..it encrypts itself with an unknown password, and upon restart I'm unable to access my phone
Click to expand...
Click to collapse
The Lineage is wiki spells things out pretty well.
https://wiki.lineageos.org/devices/pme/install
Here is another thread on twrp issues
https://forum.xda-developers.com/htc-10/how-to/guide-fix-pin-pattern-password-t3538438
morr22066 said:
The Lineage is wiki spells things out pretty well.
https://wiki.lineageos.org/devices/pme/install
Click to expand...
Click to collapse
It was not related to the data partition.
The format user data was done prior and after flashing it.
There is a DU Oreo-based build for the HTC 10: https://download.dirtyunicorns.com/?device=pme
For the time being it is under "RC". Downloading now, will report back!
Edit: ROM is very nice and is flying by. Only downside is that camera app is VERY slow... Also, woofer is not working (as expected).
What I like the most is that it is AOSP, i.e. no LineageOS stuff like AudioFX, etc. Customisation features are nice and the experience is close to Pixel with Stock OpenGapps. If the camera app is fixed, then this would be perfect (I believe it will, since this is the first RC release)!
Further notes: Capacitive buttons backlight is off by default (can't find any standard option to turn on, maybe with a kernel tool?) and notification LED does not work either. Don't mind for the capacitive buttons too much, but the LED is a real problem.
errikosd said:
There is a DU Oreo-based build for the HTC 10: https://download.dirtyunicorns.com/?device=pme
For the time being it is under "RC". Downloading now, will report back!
Edit: ROM is very nice and is flying by. Only downside is that camera app is VERY slow... Also, woofer is not working (as expected).
What I like the most is that it is AOSP, i.e. no LineageOS stuff like AudioFX, etc. Customisation features are nice and the experience is close to Pixel with Stock OpenGapps. If the camera app is fixed, then this would be perfect (I believe it will, since this is the first RC release)!
Further notes: Capacitive buttons backlight is off by default (can't find any standard option to turn on, maybe with a kernel tool?) and notification LED does not work either. Don't mind for the capacitive buttons too much, but the LED is a real problem.
Click to expand...
Click to collapse
Yea I'm having that sane problem with the touch key lights not working n it bothers me a bit. I didn't notice if the led was working or not. Keep me posted if u figure out the the key problem plz.