CyanogenMod 11 for the Samsung Galaxy Ace II x (GT-S7560M) and Galaxy Trend (GT-S7560)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Not working:
FM Radio
Bugs:
*Camera only 3.2 megapixels (2048x1536)
*Uploading/sending videos via Instagram,Facebook and Facebook Messenger fails
Downloads:
Latest Build CM11 April 23th 2017
CHANGELOG
*Optimized dalvik
*Switched to my kernel test branch
*Miscellaneous fixes
Latest EXPERIMENTAL build: ExperimentalCM11 April 26th 2017 (by @motoralbi)
EXPERIMENTAL-CHANGELOG
*Work on bionic
*Switching to faster math functions
XposedFix
Download XposedFix.zip and flash it to get xposed working.
I have to tell you that this fix is a pretty much a big security breach,and this hack will never be incorporated in to my builds.
Flashing this fix WILL REGRESS ALL THE DALVIK CHANGES we've done so far.I do not provide support for issues regarding xposed.
Installation Instructions & Requirements:
1. Copy zip packages (ROM) to an SD Card
2. Enter recovery mode
3. Choose "install zip from sdcard"
4. Select "choose zip from sdcard" and locate the ROM zip package
5. Confirm the installation by choosing "yes"
Recoveries:
I recommend you use TWRP 3.0.2 by @kengnatural
You can also flash by codename13s TWRP 2.8.0.1
If you do not have one installed, please install one of them prior to installing the ROM!
IF YOU WANT TO USE GAPPS WITH ANY OF MY BUILD,FORMAT /SYSTEM PARTITION,FLASH ROM,BOOT IT AND THEN GO BACK TO RECOVERY AND FLASH GAPPS YOU WANT!(DONT FLASH GAPPS BEFORE FIRST BOOT!!!!)
IF YOU DONT DO THIS YOULL GET THE MESSAGE THAT SETUP WIZARD STOPPED WORKING!
THIS GOES FOR EVERYONE!
I recommend you always do a CLEAN FLASH of all my builds
Little notice:
This rom is ported version of CM11 for s7562.
I would like to say thank you to all people that are/were working on this rom:
@jonypx09
@Codename13
@m4jonez
@KlinkOnE
@kengnatural (not only for work you are doing but for mentoring me too!!)
@oF2pks (for making patches and allowing us easily to add wakelock blocker to CM11!)
guys who test my builds and report everything:
@noobcoder
@F4uzan (providing moral support)
@GreekDragon (providing moral support,thanks my giros brate)
Cyanogenmod Team
Google
Maintainers:
@pavlepiramida
@motoralbi
If you find any new bugs please report and try to make a logcat of it or at least provide a detailed explanation (what happend,what were you doing,how was the phone behaving) so I can recreate that bug myself and try to fix it!
My Github account: https://github.com/pavlepiramida
FrankenKernel repo: https://github.com/pavlepiramida/FrankenKernel
Tips for usage
For best experience I suggest you:
*set your CPU Governor to lulzactive
*set your I/O Governor to zen or CFQ
*If you dont use memory hungry apps disable KSM (it will improve your battery life just a little bit and performance)
*go to Settings/Developer options and reduce all animations to 0.5
*disable all touch sounds
*turn off Daydream in Settings/Display & lights
*turn off profiles if you do not use them
*go to Settings/Privacy and disable CyanogenMod statistics reporting
*also while you are there if you are not using Blacklist disable it
Flashable Samsung stock ICS sounds : https://www.androidfilehost.com/?fid=745425885120704205
All my builds will support @microg patch for signature spoofing
To learn more about this and why its in this rom check out his thread
[APP] microG GmsCore - lightweight free software clone of Google Play Services
"Setting up Microg" on kylessopen devices by @Zeroblood
Here you can get help for setting up Microg.
my androidfilehost folder with all build so far: https://www.androidfilehost.com/?w=files&flid=156391
Hey Pavle,
Why do you suggest turning CM stat reporting off ? I understand it's not very useful, but is there a real performance gain, or just a marginal one ?
breversa said:
Hey Pavle,
Why do you suggest turning CM stat reporting off ? I understand it's not very useful, but is there a real performance gain, or just a marginal one ?
Click to expand...
Click to collapse
For me that is always off as it is pinging their servers on every boot and sometimes causes a wakelock.
I did notice a small boost in performance but that could very well be a placebo.
Disabling does not harm you,so why not turn it off
Haha, alright, I did not know about that potential wakelock.
BTW, I'll have my friend try out one these builds tomorrow to try and make that wifi work again. I'll keep you informed !
breversa said:
Haha, alright, I did not know about that potential wakelock.
BTW, I'll have my friend try out one these builds tomorrow to try and make that wifi work again. I'll keep you informed !
Click to expand...
Click to collapse
Im sure it was just a corrupt download.
If not we'll think of something!
can i install it with cwm 5.6?
tomyjeje said:
can i install it with cwm 5.6?
Click to expand...
Click to collapse
nope
flash TWRP (as I recommended TWRP 3.0.2 by kengnatural)
Hi! A couple days ago I saw there was a link in this thread to a version of this ROM with the Omni kernel, which would fix the wifi problem in Latin American devices. Now it's gone.
What happened? Did that fix not work out? I was planning to try it this weekend...
Thanks!
mincem said:
Hi! A couple days ago I saw there was a link in this thread to a version of this ROM with the Omni kernel, which would fix the wifi problem in Latin American devices. Now it's gone.
What happened? Did that fix not work out? I was planning to try it this weekend...
Thanks!
Click to expand...
Click to collapse
I had to remove it as it was going into bootloop after flash on new build.
I have to test it a bit more.
It works for my July build but in September I changed few things that apparently dont play well with codebame13 kernel.
If I dont sort it out,Ill upload whole July rom with his kernel packed in it!
Thanks for your work. I'm looking forward to it.
By the way, in case it's relevant, a while ago I tried your "fixWifi.zip" from an old release, and it wasn't working for me. (It disabled bluetooth like you said it would, but it didn't restore wifi.) I don't know if that has anything to do with how the new release will work, but I'm telling you just in case.
mincem said:
Thanks for your work. I'm looking forward to it.
By the way, in case it's relevant, a while ago I tried your "fixWifi.zip" from an old release, and it wasn't working for me. (It disabled bluetooth like you said it would, but it didn't restore wifi.) I don't know if that has anything to do with how the new release will work, but I'm telling you just in case.
Click to expand...
Click to collapse
Hah it wasn't working for anyone,few important files were missing but I was to lazy to remove it from androidhost :/
hey pavle, did you try to fix wifi on this build or just camera?
the wifi still not work, i take a logcat but there is no error about wifi.
https://drive.google.com/open?id=0B8oAXWJSnBcvZ2xMczloT3M3cTg
do you know why?
noobcoder said:
hey pavle, did you try to fix wifi on this build or just camera?
the wifi still not work, i take a logcat but there is no error about wifi.
https://drive.google.com/open?id=0B8oAXWJSnBcvZ2xMczloT3M3cTg
do you know why?
Click to expand...
Click to collapse
Thx for Logcat,Ill see if there's something new in it!
Just a quick question,did you logcat while turning wifi on?
EDIT
Dude your logcat is an empty .txt file....
Did you remove it from Drive?
Process error, on my gt s7560.. how to fix? pls
metodding said:
Process error, on my gt s7560.. how to fix? pls
Click to expand...
Click to collapse
redownload rom
pavlepiramida said:
redownload rom
Click to expand...
Click to collapse
is not resolved
metodding said:
is not resolved
Click to expand...
Click to collapse
Strange,Im having trouble downloading it myself....
Seems that its a issue on androidfileshost side,sadly nothing I can do.
I'd suggest,if you are downloading it via phone,to try and download it via PC (Firefox,Chromium,Chrome......etc) and manually move ROM to SD Card,as sometimes theres an issue with browsers for phone.
Refresh few times download page and try again,meanwhile Ill send an email to androidfiles staff to see if they are doing anything on servers (maintenance or something else).
Thanks for report and I hope it gets sorted out soon!
pavlepiramida said:
Strange,Im having trouble downloading it myself....
Seems that its a issue on androidfileshost side,sadly nothing I can do.
I'd suggest,if you are downloading it via phone,to try and download it via PC (Firefox,Chromium,Chrome......etc) and manually move ROM to SD Card,as sometimes theres an issue with browsers for phone.
Refresh few times download page and try again,meanwhile Ill send an email to androidfiles staff to see if they are doing anything on servers (maintenance or something else).
Thanks for report and I hope it gets sorted out soon!
Click to expand...
Click to collapse
Always run the download from PC, tried several times .. the error is present equally
metodding said:
Always run the download from PC, tried several times .. the error is present equally
Click to expand...
Click to collapse
Are you using any ADBlocker on browser?(If you are disable it)
Are you using a VPN?(If you are disable it)
Have you tried other mirrors to download from?(Try other mirrors that are available,I suggest Quebec mirror )
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.3 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CyanogenMod 10.2
Sauce: https://github.com/CyanogenMod
Downloads
Firmware: http://get.cm/?device=p1 (Grab the builds that start with "cm-10.2-")
Google Apps: 1 (Make sure you grab the correct version, for CyanogenMod 10.2 / Android 4.3.0)
Installation
Note: this firmware uses the same partition layout as CyanogenMod 10.1 nightly builds.
Do a Nandroid Backup!
Install the firmware using ClockworkMod Recovery
Optionally install the Google Addon
Known Issues
Bootanimation looks weird for the first few seconds.
Still image capture from the front camera doesn't work.
Change Log
20130814
Initial release
Reporting Bugs
You are allowed to report bugs only in this thread. Note that this is a preview release and non-device specific bugs will not be accepted. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved.
Use these commands to get a logcat and dmesg
Code:
adb root
adb logcat > logcat.txt (wait for a few seconds then press Ctrl + C)
adb shell dmesg > dmesg.txt
Credits
humberos, sbradymobile, jt1134, pawitp and everyone else involved in coding and debugging.
Works perfectly so far. Everything works. Battery backup is good too. The option to disable hardware keys is missing I guess but that's alright. Thanks for your hard work.
Sent from my GT-P1000 using Tapatalk 4
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Nicklag said:
Any chance we get some p1c love
Sent from my SCH-I800 using xda premium
Click to expand...
Click to collapse
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Thank you, Desai!!! It looks decent! You are the great coder.
When push the power button, the screen always switches to landscape from portrait (or
vice versa) before it goes off. And lockscreen is always portrait.
Yue_Iohikzu said:
I don't remember where, but at some point it was advised that CM10.0 and subsequent ROMS are the same for P1000, P1000L and P1000C.
@cdesai, can you please correct me if wrong?
Click to expand...
Click to collapse
P1000, P1000L and P1000N - the C version is a different beast.
Mjoelnir77 said:
P1000, P1000L and P1000N - the C version is a different beast.
Click to expand...
Click to collapse
I just verified, indeed it is a device for a different region.
Thank for the heads up.
Most likely the only requirements are the drivers for the region specific hardware, besides that it should be the same.
Hi!
First of all, thanks for this great new rom. Its feel like faster than 10.1 (maybe because of the factory reset)
My only problem i cant take PicSphere photos with Focal. The logcat is attached.
Thanks again!
As far as I know Focal is still in a very early stage. It has bugs on every 10.2 rom.
Sent from my GT-P1000 using xda app-developers app
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Go to Setting -> About tablet -> Click 7 times on Build Number to enable developer options, then set Root access there...
bravokylee said:
cdesai is always the earliest bird My question is how to enable root permission, I think this is critical to all fans!
Click to expand...
Click to collapse
Try to flash superSU 1.5.1
send from my Nexus
Installed this in my P1000. Working fine. Flashed this over 4.2.2 by alroger's and then flashed gapps for 4.3. Awesome. Thanks for the developer.
Sent from my GT-P1000 using xda premium
I can't connect to home WiFi network, even after several attempts it still reports only:
The problem with the verification
Thanks in advance for any help
Wiped Dalvik and formatted cache and system and then installed that directly over the Alroger from 10th of August with the march gapps (there are newer ones - loading them now). Everything works and no bugs so far (only missing the tweaks from the alroger rom).
You only get root after becoming a delevoper like described above. But it works then without any third party stuff or any problems.
Wow! Just installed this to test for the weekend, but I don't think I have to go back I also flashed over alrogers last build (full wipe), and it's working very stable ever since. What is experimental about it?
Just one question, what governor and scheduler do you prefer cdesai (or others)? Is the standard on demand and row advisable, because it's pre-configured like that, or is that a misunderstanding?
TRIM Support?
Hi, Thanks for this. Does anyone know if TRIM Support is enabled in this version? Does it help out?
Thanks.
why not p1c?looking forward.....
polycentric said:
why not p1c?looking forward.....
Click to expand...
Click to collapse
+1 , If I'm not interested in connecting it to the Sprint CDMA network and only use it as a WiFi tablet is it OK to use the GSM ROM anyway if i only use the wifi? I always wondered that.
If by "bootup screen looks weird for a few seconds" you mean that the Cyanogenmod logo is stretched horizontally and you can only see the word "Cyanogen", I've been having that since I first flashed CM10, even the stable builds.
As for the ROM itself, it's nice and fast, but battery life is a *****. I know it'll get better, of course, so I'll just stick with this.
Code:
*** Disclaimer by cdesai
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Introduction
Here goes my CM10.2 contribution to the good old Galaxy Tab 7". This is the ROM that I'm using and sharing with yout guys. It's based on the CyanogenMod ROM, with sgt7 repo goodies, sbradymobile's Trebuchet and Settings, OpenPDroid Patches to enable the use of the PDroid Manager Privacy App and hopefully humberos' kernel and TWRP Touch Recovery.
SGT7 Tabs - P1000, P1000N/L
CDMA - sorry, no prospect for now. Anyone able to help out there?
Click to expand...
Click to collapse
Features
Works: Everything except frontal pictures?
Click to expand...
Click to collapse
Installation instructions
Regular flash through CwM or TWRP Recovery:
Backup everything up!
Wipe/Factory Reset
Flash CM10.2 ROM.
Flash PDroid Patches (optional).
Flash GApps (optional).
Reboot.
Click to expand...
Click to collapse
Changelog
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
[20131103 ROM] My first good one. working good for me!
CwM Recovery, CM kernel, OpenPDroid optional ZIP...
Click to expand...
Click to collapse
Downloads
ROM, PDroid Patchs, separate kernel ZIPs, etc...
Alroger's Cafe-TI Download Page
Sources
https://github.com/CyanogenMod
https://github.com/sgt7
https://github.com/storm31
https://github.com/humberos
FAQ
The FAQ section in a thread is bound to grow over time... check for updates.
Q: How do I flash?
A: Learn that before coming here.
Q: How do I restore my {fill in here} ROM?
A: Learn that before coming here.
Q: How do I use ODIN?
A: Learn that before coming here.
Q: How do I use Heimdall?
A: Learn that before coming here.
Click to expand...
Click to collapse
Links and References
PDroid Manager Security App in the Play Store.
GApps (use the correct one, for Android 4.3.x / CM10.2.x only!)
storm31's experimental thread.
Click to expand...
Click to collapse
Troubleshooting
Mobile, Data, 3G problems? This ROM comes with the JPZ modem. You might need to flash your customary modem back. Just copy your modem.bin to /radio in the Tab.
Wrong MAC? Wrong IMEI? Try restoring files from /sdcard/backup/efs*/* to /efs/. If you don’t have a backup, then start over with FULL Restock, and next time save your backup/efs folders, which are created everytime you install CM10.1.
Market problems? Clear Google Services Framework data and reboot.
Multiple users is NOT supported by the OpenPDroid Patches.
Developer options: can’t find it? It’s hidden! Tap About tablet / Build number 7 times to unlock it.
No touch? That means you got the wrong kernel installed. A couple of builds had problems identifying the exact model. Just flash your kernel through recovery or heimdall / odin.
No boot? Stuck at the SAMSUNG logo? Flash the correct kernel using Download Mode using heimdall!
Deep Sleep not kicking in? Try wiping cLock’s data or freezing / removing it (com.cyanogenmod.lockclock).
Click to expand...
Click to collapse
Thanks To/Credits
* humberos
* cdesai
* sbradymobile
* storm31
everyone involved! CyanogenMod peeps, TWRP peeps, Linux peeps, OpenSource peeps, Android peeps, XDA peeps...
Dev-Host Downloads and Ads
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float around and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I've never even noticed that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
reserve 3
I've got a cdma gtab and the resources to put up a build environment for it. I suck as a developer though, but would love 10.2 on my old tab so I'll take a crack at it if I can bug ppl here for help.
UPDATE 20131104 - kernel humberos v1.52
[20131104 ROM] with Kernel 3.0.101-HumberOS-v1.52
Thanks @storm31 for your repo / manifest!
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
papatzis said:
Hi alroger I am running your 4.2.2 version 10.1, without having any problem at all
I don't know if this one has any bugs, Is it possibe to update to this one only by just clearing cache and davlik cache through TWRP and after that to install the Rom , OpenPdroid and Gapps? I have to install all from scratch?
By the way the link for Gapps for 10.2 is not working page opens but is not downloading , I had already downloaded the rom and OpenPdroid
I have a full backup using TWRP to restore if I have any serius probems.
Thanks in advance and for the efford
Click to expand...
Click to collapse
No, can't keep your configs between major CM versions... you can try, but usually ends up in bad results. I recomend factory reset / wipe and restore your apps and data using something like Titanium Backup, but NOT the system settings.
Yeah, gapps seems to be having temporary problems right now... how about this temp link for you guys in UbuntuOne: gapps-jb-20130813-signed.zip
subscribed
Sent from my GT-I9500
Hi
I just installed the rom and thank you very much it's better than official cm 10.1 for me
But also I found some more issues
- boot logo is still weird on startup
- seLinux does not enable, just freeze when click ok
- unable to reset data with sdcard erase, just rebooting and system is the same. clean data from cwm works ok
regards
Unable to setup restricted account. Crash when press setup icon from main user account
Sent from my GT-P1000 using XDA Premium 4 mobile app
"dirty" flashed (wipe of system, boot, cache and dalvik only) coming from storm31's 20th release and no apparent problems so far
Back camera does not suitable for videoconferencing. Got a lot garbage in preview overlay in Trueconf videoconferencing software. Front camera preview works ok, never got this bug in stock
---------- Post added at 06:48 PM ---------- Previous post was at 06:43 PM ----------
The same result in HighSpeed Cam+ preview works only for 1024x600 and 800x600 other settings are garbage
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Dmaxx67 said:
i have an old cdma tab that i just use for wifi no data plan connected anymore. Could you hook me up with a download that might work or point me on how to build my own. I got a build environment setup already and building roms for my lg optimus g
Click to expand...
Click to collapse
All my build tips in the CM10.1 thread. Not even a manifest to build cdma in cm10.2, or I would have shared. Feel free to test cm10.1 kernels with this ROM and share the results!
Thanks alroger for this. Will test it out soon :thumbup:
Sent from my GT-I9505G using Tapatalk 4
Firstly big thank alroger cdesai humberos koxudaxi et all, this build 20131104 has 487mb only, but on normal usage always available >100mb, hence response reactipon is really great. OC 1.4Ghz also stable, unlike 4.2 only manages 1.2Ghz.
Ok, possible bug report, bluetooth headset doesn't seem to be working with skype and oovoo, how to get logcat again! Thanks.
Can't detect headset device unless turn on DUT first then start BT in android. Inconclusive bcos only tried 1 DUT.
Sent from my GT-P1000 using xda app-developers app
Hi!
Thanks Alroger for keeping delivering to our old tabs
Came from Alrogers 4.2.2 date 10 aug.
Wiped and flashed.
Everything works great, also both cameras.
Only fc on browser so using chrome, and message app missing so im using Handcent.
Sent from my GT-P1000 using Tapatalk 2
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
goughymachine said:
How's video playback going on this one? That's a biggie for me, and has seen me take a little longer to move to each new version. I stream or store on an sd card, mp4's etc up to 1080p of about 1.5g and on 4.2.2 with mx player they are pretty much perfect.
I can certainly say that you guys have been beyond outstanding in keeping our tab relevant. Every time I think it's time to upgrade, it just works well enough (a bit slower I know, but still works) to keep my money in my pocket. My bank balance thanks you all!
Click to expand...
Click to collapse
Video playback is smooth for me so far on this ROM
Sent from my GT-I9505G using Tapatalk 4
alroger said:
Please notice that Dev-Host has some really nasty snicky intrusive Ads in their download pages. DO NOT BE FOOLED! There is only one REAL download LINK, and it DOES NOT REQUIRE YOU TO WAIT, INSTALL, VISIT OR DO ANYTHING. And it's usually the smallest most discrete button of them all.
Check out the image bellow and be carefull with all the ads around the real download button. They might float and trick you into clicking them.
I'm sorry for any inconvenience that might have caused. I never even knew that was happening because I use a HOSTS mod for blocking those nasty ads and sugggest that everyone do too. Check it out in this site: Blocking unwanted connections
Click to expand...
Click to collapse
Quoting post #2. Check the image attached there.
CyanogenMod 11 with crDroid additions for Xiaomi MiPad
!! IMPORTANT !!
xep.8800.org will be temporarely down from 29.03.15 for couple of weeks so it would be great if somebody do mirror of latest buld and post link here. Thx!
About:
Source built CM except proprietary blobs and binary kernel from stock MIUI rom.
This is not a port from another binary rom.
Click to expand...
Click to collapse
What's working:
It seems everything working for now..
Click to expand...
Click to collapse
Not working/Bugs:
"Wi-Fi region code" setting is broken. Do not touch it or it will break your wi-fi.
you tell me.. testing in progess..
Click to expand...
Click to collapse
Instructions:
1. Install CWM Recovery
2. Do Full Wipe If coming from another ROM
3. Flash ROM
4. Flash Google Apps (my recommendation is to install minipal gapps due to /system partition size limits)
5. Reboot
Click to expand...
Click to collapse
Multirom Instructions:
1. Install TWRP Multirom Recovery
2. Reboot into TWRP and install multirom-20150205-v30-UNOFFICIAL-mocha.zip
3. Click "Advanced->Multirom" and flash your desired second rom.
4. Return to the installed roms listing, click fresh installed rom and click "Remove boot.img" (Due to closed kernel sources kexec-hardboot is not implemented so we need to remove boot.img)
5. Reboot. Select your desired rom from multirom menu
Click to expand...
Click to collapse
Downloads:
cm-11-20150327-UNOFFICIAL-mocha.zip
CWM
Multirom:
TWRP_multirom-v2.8.4-mocha.zip
multirom-20150205-v30-UNOFFICIAL-mocha.zip
I don't know if it is actually compiled with TEGRA optimizations but have created CWM flashable zip with stock bionic libraries. You can flash it on top of CM installation:
tegra_bionic.zip
Changelog:
15.02.15
* apply qcom bionic optimization
* build.prop dalvik etc tweaks
02.02.15
* Reboot to recovery fixed
* Recents view proportion fixed
26.01.15
* Synced with CM repo
* have enabled Display mirroring (miracast) though it does not work with my EZ dongle, sound is ok but screen is black. May be it'll work with another dongles...
21.01.15
* Update to the latest kernel from stock MIUI
20.01.15
* Sleep issue fixed
* Adopt nvcplsvc for CM & implement Performance Profile selection
18.01.15
* Synced up with CM repo.
* Added USB Mass Storage mode for external sd. Though it does not work along with ADB Debug enabled, need to be switched off when using UMS mode.
17.01.15
* Switch to CM's audio_effects and make Dirac plugin work. Equalizer crash fixed.
Click to expand...
Click to collapse
Links:
http://github.com/cyanogenmod
http://github.com/cristianomatos
https://github.com/faust93
Click to expand...
Click to collapse
I take no responsibility for what this may or may not do to your device.
Do not forget to click Donate button! It makes me work harder!
Thanks Pumbaster for your work!
My device doesn't seem to go to sleep...
WakeLockDetector shows Android System --> ConnectivityService as the main issue. BetterBatteryStats shows the same...
I tried turning location services off, froze Mobile Data and Mobile Network Configuration in Titanium Backup but that doesn't help. No checking if the same wakelock appears with wifi off...
Anyone with any clue? Or the same problem?
Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)
Krystanos said:
Will check the ROM and tell you dagrim.
But first thing first, I have to install it. And I have 2 questions, to avoid screwing things.
- Does it works with TWRP instead of CWM?
- Is there a reason to have a June version of minimal gapps where a version of December exist?
Thanks to everyone in the process (romers, informers, helpers)
Click to expand...
Click to collapse
I used pico gapps myself and the june version is way smaller then the december version, then again I actually did try the december version as well and it seemed to work fine. So not sure, apart from the size...
About TWRP vs CWM, not sure. Guess it also should work with TWRP but haven't tried... CWM is needed for True Dual Boot, but that seems bugged anyway.
By me too. Battery drain is to much, device don't go to sleep...
zolikaDB said:
By me too. Battery drain is to much, device don't go to sleep...
Click to expand...
Click to collapse
Yeah, seems to be a common issue.
My device only goes to sleep when wifi is turned completely off. When I have it set to turn off when display is off I still get the wakelocks. I also have set the scanning for open wifi to off, location services turned off, etc.
For now I flashed back to the 0114 version as that one is working fine here...
If I can share some logs or anything, I'd be more then happy to!
@dagrim1: I hope, Pumbaster make new, fixed build
I Encounter Graphical Glitches with 3rd Party Browsers (Opera and UC Browser)
Chrome works fine so far. Also heavy Battery drain an 17/1
@faust93: what is with battery drain?
Did a very dirty try or replacing frameworks.jar but that didn't work...
Saw some wifiStateTracker errors and that and ConnectivityService seemed to be part of the framework, that's why I gave it a shot. 0118 still has the deespleep/wakelock issue btw...
I don't really care about dual boot. MIUI has so much limits. Once I go to CM, I don't think I'll be able to come back to MIUI...
But I'll stick to CWM, just in case...
I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!
dagrim1 said:
I just tried the wpa_supplicant.bin file posted by pumbaster on 4pda and it seems to solve the deepsleep issues!
Post 351 of the custom mipad 4.4.4. rom thread there...
http://xep.8800.org/mipad/wpa_supplicant.bin
Place in system/bin and set permissions to rwxr-xr-x
@faust93: I hope you don't mind me posting this here but I saw you posted links to the same location in the topic start, if so my apologies and I will remove it asap (but I am going to sleep now, so won't be up until next morning...)
Also had some iussues with stuttering video playback, but setting 'disable hardware overlay' in developer settings fixed that for now...
Thanks for the awesome work!
Click to expand...
Click to collapse
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?
zolikaDB said:
Is this bin file integrated in 2015.01.18 build? What do you know about this ROM? Did you test it?
Click to expand...
Click to collapse
I don't believe it's integrated in 0118, think that fixes some sd stuff...
I am currently running the 0118 build (with the wpa_supplicant.bin file replaced manually) and seems to be working pretty fine. Had some video issues with a certain app (video jumping a bit, stuttering) but think I fixed that with 'disable hardware overlay' in developer options.
Without the replaced .bin I also had a problem with turning off and on wifi. It would work when booting, but if I turned it off I couldn't turn it on again... The replaced .bin also fixes that. Now checking if antutu finishes it's run...
@dagrim1: hope, Pumbaster fix this problem!
Just another small question: full wipe will delete the /data partition too right ? So the ROM zip file will be deleted too ? Or am I missing something ?
Thanks.
I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.
jastonas said:
I tried to install with TWRP and when I reboot, I get to MIUI v6 so I guess it rebooted in the wrong system.
Click to expand...
Click to collapse
Unfortunately I tried to install CWM with fastboot and it failed to install... No specific error message.
I have seen a port of TWRP for MiPad. Have you tried this one, or the standard one?
How I wish I could just flash CM on my MiPad...
CyanogenMod is a free, community built distribution of Android which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I'm not associated with Cyanogenmod at all and most definitely not on their paylist. Just a hobbyist.
Download:
http://download.cyanogenmod.org/?device=trltexx
How to Install
* For 910F: Use TWRP for trltexx: http://www.techerrata.com/browse/twrp2/trltexx
* For 910G: Use TRWPR for trltedt: http://www.techerrata.com/browse/twrp2/trltedt
(I suggest to download the .img and flash that recovery image with the tool 'flashify' )
After that, flash the Gapps of your choice BUT MAKE SURE THEY ARE LOLLIPOP GAPPS !! And make sure the version is compatible with the Android version of the ROM (current version: Android 5.1.1)
If you come from Touchwiz, make sure to do a factory reset and wipe Dalvik cache.
The ROM is rooted already ! You just need to enable it, which can be done in the developer options. If you don't know how to see developer options: http://www.greenbot.com/article/245...-options-on-your-android-phone-or-tablet.html
Again, this is very important: it is rooted already DO NOT ROOT IT YOURSELF !!! If you re-root the ROM with for example chainfire, you can expect all kinds of issue's and problems.
Changelog:
http://www.cmxlog.com/12.1/trltexx/
FAQ:
Q: Help I can't install it, my recovery says "this is for trltexx but you are on trlte".
A: Use the correct recovery like pointed out above
Q: Do I need to factory reset/wipe everything when I flash a new nightly ?
A: If you were previously on CM12 I think you should be fine. However I suggest to always wipe cache and dalvik cache, if you only wipe the cache you ensure the system is not using old
stuff. If you however are experiencing problems that no one else seems to experience, a full factory reset might be an idea.
Q: Should I flash gapps every time I flash a new nightly ?
A: No, only the first time you need to flash gapps.
Q: Does this work for 910C, 910U, 910T or whatever other variant ?
A: No. This ROM is only for 910F and 910G. Some other Snapdragons like the 910T have a ROM out, but check those forums. Exynos users like 910C are still out of luck although someone is working on a very early alpha ROM for it: http://forum.xda-developers.com/note-4/orig-development/n910c-cyanogenmod-12-sources-t3015717
Q: I want a cooler device (or more performance).
A: You can lower the throttle temp (cooler device) or increase it (more performance) with for example Faux clock or with this free app: https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
Q: Help my phone wont go into deepsleep.
A: This could be anything. To find out what's keeping your phone awake I wrote this small tutorial: http://forum.xda-developers.com/showpost.php?p=59378043&postcount=330
Q: My phone sleeps well but still is draining too much battery
A: In your wifi settings in the top right corner you can pull down a menu. Click advanced and mare sure you have 'scanning always available' disabled. And then there are the usual things like in settings/accounts disable syncing for your accounts, don't enable any hardware features you don't use etc.
Q: Can I use a custom kernel with CM12 ?
A: Some might work. However we optimize things in the CM12 kernel specifically for CM12, so flashing a custom kernel might cause problems. So if you are on a custom kernel and reporting a problem with CM12, at least ALWAYS report that you've flashed a custom kernel when posting about some problem you are experiencing !
Q: Does the S-pen work ?
A: Yes, the S-pen works right out of the box on Cm12, including hovering. If you're a heavy s-pen user and want functionality like for example making a cropped screenshot (just like in Touchwiz) you can enable that with a 3rd party app like: http://forum.xda-developers.com/android/software/app-app-samsung-devices-provided-stylus-t3000448
Q: Can I control display parameters like Contrast and Saturation ?
A: Yes our kernel supports this app to do that: http://downloads.codefi.re/savoca/kcal/re.codefi.savoca.kcal-v1.2.apk
Q: Can I set change the display modes, like in Touchwiz ?
A: Yes I wrote an app for that, MDNIE tuner: https://mega.co.nz/#!uFwCAT7Z!qFzF9_2ZsJ-pHCNq8VLAD1PIiEFD9sKtLtWrazdQt5I
Q: How can I do 60/120 hz video recording ?
A: http://forum.xda-developers.com/showpost.php?p=61059360&postcount=2285
Q: What bootloader and/or modem should I be on ?
A: For 910F:Since the kernel is currently based on BOB4, I'd suggest to have both the bootloader and modem BOB4 too. You can download flashable odin files for those 2 here:
modem: https://www.androidfilehost.com/?w=files&flid=26347
bootloader: https://www.androidfilehost.com/?w=files&flid=26346
For 910G: Dont know exactly, probably a bootloader from december would be best.
*Known issue's:
* Google camera sometimes doenst close correctly on CM12-1 and then will yield a 'cant connect to camera', I'd suggest not to use Google camera. All other cam apps work fine.
* LTE can lose connection in some countries (Finland ?)
CM12 Known issue's (not specific to the note 4)
* Ringtones only work from internal SD card (not external sd card)
* Hardware encryption not functionally
* Fingerprint sensor not integrated just yet.
A special thank you to @slayher and @fattire, who not only were the pioneers for CM12 on the Note 4 but also helped me out countless times with problems I've ran into, both with the code and with GIT. Without their work and help we would be nowhere.
Enjoy !
XDA:DevDB Information
Official Cm12 for 910F and 910G, ROM for the Samsung Galaxy Note 4
Contributors
gekkehenkie11, Slayher, Fattire
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
Version Information
Status: Nightly
Created 2015-03-05
Last Updated 2015-03-05
reserved
Yeah !
Thank you bro !
Thanks so much gekkehenkie! After all your hard work we are finally on official nightlies
Thanks!
So here we go on with official nightly's @gekkehenkie11. You made it possible to keep this phone longer than 2 months. That's almost a new record for me. So I did settle. And on cm. But with a better camera. Congratulations.
dankje henk, thanks a lot henk ! this made the note so much faster !!!
ps: dont forget about the theme's issue
Official... Finally, congrats gekkehenkie11
Finally Offical nighlies! Thanks Gekke and everyone who helped to develop this amazing rom!
Awesome!
background data problem
Hey guys theres a problem with background data, it seems to be restricted but when I go into settings it isnt, this is causing problems with downloading and social media, anyone any ideas?
Hello , I am on a N910G and want to try this ROM
What is this install script and How to edit it ?
Thank you
Planet X said:
So here we go on with official nightly's @gekkehenkie11. You made it possible to keep this phone longer than 2 months. That's almost a new record for me. So I did settle. And on cm. But with a better camera. Congratulations.
Click to expand...
Click to collapse
I almost did the same if it weren't for this development thread. Awesome work yo!
@gekkehenkie11, congrats on the release
ForceField said:
Hello , I am on a N910G and want to try this ROM
What is this install script and How to edit it ?
Thank you
Click to expand...
Click to collapse
Never Mind , Found it
Working perfectly on N910G :good:
Still have to play with it
Nice one gekkenhekie you deserved this thread the amount of Man hours you've put it. Flashing this bad boy now, cheers mate
Since gekkehenkie11 is not accepting any donations I would like to thank you very much for your awesome and hard work.
My post doesn't add anything to this thread but I just wanted to say thanks.
Tried to flash but got an error within TWRP, running a 910F.
Performed a full wipe, installed from internal memory, have just installed another CM based rom and all is well ?
Could be a bad download, i'll re-attempt, am I right in thinking that the first line doesn't need to be edited if you're running a 910F ?
Cheers.
ForceField said:
Never Mind , Found it
Working perfectly on N910G :good:
Still have to play with it
Click to expand...
Click to collapse
Where is it?
How can I add options at the bottom in shoutdown menu? I mean buttons normal-vibrate-silent
Code:
[COLOR="Purple"]#include <std_disclaimer.h>[/COLOR]
[COLOR="Navy"]/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/[/COLOR]
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the official installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
More detailed instructions at:
Install LineageOS on find7
Download link:
LineageOS Downloads
Recommended Google Apps package:
Open GApps (choose the variant you want. Recommended nano package)
Official root addon
LineageOS Extras
Changelog:
Changes for find7
Bug reports:
How to submit a bug report
LineageOS JIRA
Donate to support development:
Donate via PayPal to mikeioannina
Donate via PayPal to LineageOS
XDA:DevDB Information
Official LineageOS 15.1 for Find7a/s, ROM for the Oppo Find 7
Contributors
mikeioannina
Source Code: https://github.com/LineageOS
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Any version of ColorOS. Unified storage not supported.
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-07-09
Last Updated 2018-11-15
Just curious. Are there any way for find 7 to install nano gapps? I keep on getting insufficient storage... Sad...
Am having problem of cold start gps. Takes about 8-10 mins before locking in. However, once lock in,everything work perfectly.
Updated on 18july.now everything is perfect. Even the battery life got better.
thank you???
luckywang95 said:
Just curious. Are there any way for find 7 to install nano gapps? I keep on getting insufficient storage... Sad...
Click to expand...
Click to collapse
You can delete the storage check in the installer script. Did it before and worked fine. I'm gonna try it tonight with this build.
Update: Stucked in bootloop. Gonna try tommorow again.
Update#2: Here is my working solution:
1. Flashing rom
2. Flashing addonsu
3. Flashing openGapps micro
Whats the perception about the Lineage<color>Accent.apks ?
They seemed to compromise my device and after removing these system aps
my find7 starts twice as fast as before.
In Settings->Apps they are all active but do nothing and their names are renamed like kakao lavendel kirsche carbon...
I'dont know whats this about,
but I feel Hacked and compromised by these apks!
Please explain what these apks are good for
and why it is stated in Settings->Apps that they do nothing else as being in background active
nor is anything protokollised from their activity!
I did a clean fresh install with these Custom Rom,
wiping all partitions and installing them with TWRP 3.2.2.0
With best regards Zoltan-X
P.S.: Find7 works better without these and no Errors are caused in usage so far!!!
Zoltan-X said:
Whats the perception about the Lineage<color>Accent.apks ?
They seemed to compromise my device and after removing these system aps
my find7 starts twice as fast as before.
In Settings->Apps they are all active but do nothing and their names are renamed like kakao lavendel kirsche carbon...
I'dont know whats this about,
but I feel Hacked and compromised by these apks!
Please explain what these apks are good for
and why it is stated in Settings->Apps that they do nothing else as being in background active
nor is anything protokollised from their activity!
I did a clean fresh install with these Custom Rom,
wiping all partitions and installing them with TWRP 3.2.2.0
With best regards Zoltan-X
P.S.: Find7 works better without these and no Errors are caused in usage so far!!!
Click to expand...
Click to collapse
Are you serious? These are just simple apks for the styles you can change from display settings.
If you are so curious about "being hacked" look at the source: https://github.com/LineageOS/android_packages_overlays_Lineage
Curios i've had in those app a data collecting folder structure,
like db, files, and more, maybe a rootkit on my device???
I don't know, since i removed those my find7 works again really well,
what it didn't do since a long time in this year....
With best regards
Code looks fine and i'll recheck if the image was compromised or not or how, but later these days.
thank you for the quick hint to those files!
P.S.: I've dirty reflashed the image i used to install lineageOS, after the expected remove, and no these nightly seems not been compromised,
Sorry for the alert,
but in the last days many hacks occured in my private relationships with my dearest, so I was a little curios, but seems now clean on my device!
Thank You verry much,
and Kudos Kudos Kudos to your quick hint reply.
I just installed lineage-15.1-20180806-nightly-find7-signed.zip to replace my stock Oppo Find7 firmware on the weekend and after a few days with it, so far so good! I had to lose the LVM unfortunately, but I'd rather have an up to date OS.
The battery life seems shorter than the stock firmware. I can still get through the day, but down to 40 or 50% or less by 6PM instead of much more with the stock Oppo FW. I haven't tried tweaking any battery life settings yet though.
Two minor things with the install compared to the LineageOS howto - the SD card path was different to what was documented ( /internal_sd not /sdcard) , and I had to install open_gapps-arm-8.1-pico-20180812.zip (pico instead of the documented nano version)... but this was minor stuff and I got where I wanted to go.
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
hexplor said:
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
Click to expand...
Click to collapse
Video recording is now working on latest AOKP Rom for Find 7. Google is your friend.
knusto said:
Video recording is now working on latest AOKP Rom for Find 7. Google is your friend.
Click to expand...
Click to collapse
Wooot ! They have nougat builds for find 7
hexplor said:
Awesome. Thanks for this release. Everything (almost) works great. Feels like a new phone. Only video recording does not work. Any ideas ?
Click to expand...
Click to collapse
It will be fixed in next build.
mikeioannina said:
It will be fixed in next build.
Click to expand...
Click to collapse
Thank you so much. Can't wait
hexplor said:
Wooot ! They have nougat builds for find 7
Click to expand...
Click to collapse
AOKP is now on Oreo for Find 7
mikeioannina said:
It will be fixed in next build.
Click to expand...
Click to collapse
Got the latest build. All fine Thanks
Allthough its not supported i've got unified working. not reliable tho. the only way i got it working when flashing los and direct rebooting into recovery again and then flashing the cm-13.0-find7-unified-storage-patch.zip from the according thread. cuz the original link is dead incl mirror i got my copy uploaded to gdrive here. https://drive.google.com/file/d/1sZ72qUD5P7qL4tsIF3MB-cQk9x9pamRR/view?usp=sharing
only drawback being you cant reboot anymore cuz that will somehow give you the your-sdcard-is-****ed message. havent found a reasonable routine so i guess you'll have to try your luck yourself and maybe give feedback?
Hi, could you disable CABC(Content Adaptive Brightness Control) or provide a way to disable it? The hardware of Find 7 use it and it really makes some troubles, brightness, color. Really thanks if you have that time
I read that the problem of heavy games crashing on Bacon (Oneplus One) was resolved recently with this commit https://review.lineageos.org/#/c/LineageOS/android_device_oneplus_bacon/+/218799/
I have the same problem with the Oppo Find 7/s (i.e. heavy games are crashing). As this device has the same processor and RAM as that of the Bacon, is it possible to get the same fix for Find 7 as well?
Manas1796 said:
I read that the problem of heavy games crashing on Bacon (Oneplus One) was resolved recently with this commit https://review.lineageos.org/#/c/LineageOS/android_device_oneplus_bacon/+/218799/
I have the same problem with the Oppo Find 7/s (i.e. heavy games are crashing). As this device has the same processor and RAM as that of the Bacon, is it possible to get the same fix for Find 7 as well?
Click to expand...
Click to collapse
That commit has already been applied for Find7 - https://github.com/LineageOS/androi...mmit/80e1e7e5ffca2c69730eecc8c498423c2ea48463