Sound firmware with the Board instalom audio codec
A long smoking datasheet audio codec, the log analysis of its calculated two registers that can improve a little bit the sound of the android (It does not work while listening to the radio, DVD, aux)
1 - Bass
2 - Treble
Assembled at the start of the firmware that changes values. Changes in the values realized through init.d
the path system \ etc \ init.d there are two files
01saund_ku_bass - Bass setting
02saund_ku_middle - Treble settings
By default, the firmware included in the following values
Bass - 80Hz Gain +11
Treble - 11.7kHz Gain +12
The following are the supported values to select
Bass
#! / Bin / sh
#setreg -y 4 0x1A 0x25 0x00 # 80Hz Gain +12
#setreg -y 4 0x1A 0x25 0x01 # 80Hz Gain +11
#setreg -y 4 0x1A 0x25 0x02 # 80Hz Gain +10
#setreg -y 4 0x1A 0x25 0x03 # 80Hz Gain +9
#setreg -y 4 0x1A 0x25 0x04 # 80Hz Gain +8
#setreg -y 4 0x1A 0x25 0x05 # 80Hz Gain +7
#setreg -y 4 0x1A 0x25 0x06 # 80Hz Gain +6
#setreg -y 4 0x1A 0x25 0x07 # 80Hz Gain +5
#setreg -y 4 0x1A 0x25 0x08 # 80Hz Gain +4
#setreg -y 4 0x1A 0x25 0x09 # 80Hz Gain +3
#setreg -y 4 0x1A 0x25 0x0A # 80Hz Gain +2
#setreg -y 4 0x1A 0x25 0x0B # 80Hz Gain +1
#setreg -y 4 0x1A 0x25 0x0C # 80Hz Gain +0
#! / Bin / sh
#setreg -y 4 0x1A 0x25 0x20 # 105Hz Gain +12
#setreg -y 4 0x1A 0x25 0x21 # 105Hz Gain +11
#setreg -y 4 0x1A 0x25 0x22 # 105Hz Gain +10
#setreg -y 4 0x1A 0x25 0x23 # 105Hz Gain +9
#setreg -y 4 0x1A 0x25 0x24 # 105Hz Gain +8
#setreg -y 4 0x1A 0x25 0x25 # 105Hz Gain +7
#setreg -y 4 0x1A 0x25 0x26 # 105Hz Gain +6
#setreg -y 4 0x1A 0x25 0x27 # 105Hz Gain +5
#setreg -y 4 0x1A 0x25 0x28 # 105Hz Gain +4
#setreg -y 4 0x1A 0x25 0x29 # 105Hz Gain +3
#setreg -y 4 0x1A 0x25 0x2A # 105Hz Gain +2
#setreg -y 4 0x1A 0x25 0x2B # 105Hz Gain +1
#setreg -y 4 0x1A 0x25 0x2C # 105Hz Gain +0
#! / Bin / sh
#setreg -y 4 0x1A 0x25 0x40 # 135Hz Gain +12
#setreg -y 4 0x1A 0x25 0x41 # 135Hz Gain +11
#setreg -y 4 0x1A 0x25 0x42 # 135Hz Gain +10
#setreg -y 4 0x1A 0x25 0x43 # 135Hz Gain +9
#setreg -y 4 0x1A 0x25 0x44 # 135Hz Gain +8
#setreg -y 4 0x1A 0x25 0x45 # 135Hz Gain +7
#setreg -y 4 0x1A 0x25 0x46 # 135Hz Gain +6
#setreg -y 4 0x1A 0x25 0x47 # 135Hz Gain +5
#setreg -y 4 0x1A 0x25 0x48 # 135Hz Gain +4
#setreg -y 4 0x1A 0x25 0x49 # 135Hz Gain +3
#setreg -y 4 0x1A 0x25 0x4A # 135Hz Gain +2
#setreg -y 4 0x1A 0x25 0x4B # 135Hz Gain +1
#setreg -y 4 0x1A 0x25 0x4C # 135Hz Gain +0
#! / Bin / sh
#setreg -y 4 0x1A 0x25 0x60 # 175Hz Gain +12
#setreg -y 4 0x1A 0x25 0x61 # 175Hz Gain +11
#setreg -y 4 0x1A 0x25 0x62 # 175Hz Gain +10
#setreg -y 4 0x1A 0x25 0x63 # 175Hz Gain +9
#setreg -y 4 0x1A 0x25 0x64 # 175Hz Gain +8
#setreg -y 4 0x1A 0x25 0x65 # 175Hz Gain +7
#setreg -y 4 0x1A 0x25 0x66 # 175Hz Gain +6
#setreg -y 4 0x1A 0x25 0x67 # 175Hz Gain +5
#setreg -y 4 0x1A 0x25 0x68 # 175Hz Gain +4
#setreg -y 4 0x1A 0x25 0x69 # 175Hz Gain +3
#setreg -y 4 0x1A 0x25 0x6A # 175Hz Gain +2
#setreg -y 4 0x1A 0x25 0x6B # 175Hz Gain +1
#setreg -y 4 0x1A 0x25 0x6C # 175Hz Gain +0
Treble
#! / Bin / sh
#setreg -y 4 0x1A 0x2C 0x00 # 5.3kHz Gain +12
#setreg -y 4 0x1A 0x2C 0x01 # 5.3kHz Gain +11
#setreg -y 4 0x1A 0x2C 0x02 # 5.3kHz Gain +10
#setreg -y 4 0x1A 0x2C 0x03 # 5.3kHz Gain +9
#setreg -y 4 0x1A 0x2C 0x04 # 5.3kHz Gain +8
#setreg -y 4 0x1A 0x2C 0x05 # 5.3kHz Gain +7
#setreg -y 4 0x1A 0x2C 0x06 # 5.3kHz Gain +6
#setreg -y 4 0x1A 0x2C 0x07 # 5.3kHz Gain +5
#setreg -y 4 0x1A 0x2C 0x08 # 5.3kHz Gain +4
#setreg -y 4 0x1A 0x2C 0x09 # 5.3kHz Gain +3
#setreg -y 4 0x1A 0x2C 0x0A # 5.3kHz Gain +2
#setreg -y 4 0x1A 0x2C 0x0B # 5.3kHz Gain +1
#setreg -y 4 0x1A 0x2C 0x0C # 5.3kHz Gain +0
#! / Bin / sh
#setreg -y 4 0x1A 0x2C 0x20 # 6.9kHz Gain +12
#setreg -y 4 0x1A 0x2C 0x21 # 6.9kHz Gain +11
#setreg -y 4 0x1A 0x2C 0x22 # 6.9kHz Gain +10
#setreg -y 4 0x1A 0x2C 0x23 # 6.9kHz Gain +9
#setreg -y 4 0x1A 0x2C 0x24 # 6.9kHz Gain +8
#setreg -y 4 0x1A 0x2C 0x25 # 6.9kHz Gain +7
#setreg -y 4 0x1A 0x2C 0x26 # 6.9kHz Gain +6
#setreg -y 4 0x1A 0x2C 0x27 # 6.9kHz Gain +5
#setreg -y 4 0x1A 0x2C 0x28 # 6.9kHz Gain +4
#setreg -y 4 0x1A 0x2C 0x29 # 6.9kHz Gain +3
#setreg -y 4 0x1A 0x2C 0x2A # 6.9kHz Gain +2
#setreg -y 4 0x1A 0x2C 0x2B # 6.9kHz Gain +1
#setreg -y 4 0x1A 0x2C 0x2C # 6.9kHz Gain +0
#! / Bin / sh
#setreg -y 4 0x1A 0x2C 0x40 # 9kHz Gain +12
#setreg -y 4 0x1A 0x2C 0x41 # 9kHz Gain +11
#setreg -y 4 0x1A 0x2C 0x42 # 9kHz Gain +10
#setreg -y 4 0x1A 0x2C 0x43 # 9kHz Gain +9
#setreg -y 4 0x1A 0x2C 0x44 # 9kHz Gain +8
#setreg -y 4 0x1A 0x2C 0x45 # 9kHz Gain +7
#setreg -y 4 0x1A 0x2C 0x46 # 9kHz Gain +6
#setreg -y 4 0x1A 0x2C 0x47 # 9kHz Gain +5
#setreg -y 4 0x1A 0x2C 0x48 # 9kHz Gain +4
#setreg -y 4 0x1A 0x2C 0x49 # 9kHz Gain +3
#setreg -y 4 0x1A 0x2C 0x4A # 9kHz Gain +2
#setreg -y 4 0x1A 0x2C 0x4B # 9kHz Gain +1
#setreg -y 4 0x1A 0x2C 0x4C # 9kHz Gain +0
#! / Bin / sh
#setreg -y 4 0x1A 0x2C 0x60 # 11.7kHz Gain +12
#setreg -y 4 0x1A 0x2C 0x61 # 11.7kHz Gain +11
#setreg -y 4 0x1A 0x2C 0x62 # 11.7kHz Gain +10
#setreg -y 4 0x1A 0x2C 0x63 # 11.7kHz Gain +9
#setreg -y 4 0x1A 0x2C 0x64 # 11.7kHz Gain +8
#setreg -y 4 0x1A 0x2C 0x65 # 11.7kHz Gain +7
#setreg -y 4 0x1A 0x2C 0x66 # 11.7kHz Gain +6
#setreg -y 4 0x1A 0x2C 0x67 # 11.7kHz Gain +5
#setreg -y 4 0x1A 0x2C 0x68 # 11.7kHz Gain +4
#setreg -y 4 0x1A 0x2C 0x69 # 11.7kHz Gain +3
#setreg -y 4 0x1A 0x2C 0x6A # 11.7kHz Gain +2
#setreg -y 4 0x1A 0x2C 0x6B # 11.7kHz Gain +1
#setreg -y 4 0x1A 0x2C 0x6C # 11.7kHz Gain +0
Firmware is available in three versions:
Firmware is assembled in the kitchen github.com:
- Tune build.prop for speed
- Set default languange and timeformat
- Root ROM by adding SuperSU
- Unify the two user partitions into a single big one (known under the name FUSE)
Build date firmware 02.11.2016g.
The stock launcher - https://yadi.sk/d/uLGNK8KGzV5Yf
KGL launcher - https://yadi.sk/d/sE8zKMNrzV5aX
The point of this post - Find Programmer enthusiast to write an audio codec adjustment application
Sounds great, so this works at a system level so affects the normal am/fm radio too? is it a replacement to V4A or can we use both?
Dec64 said:
Sounds great, so this works at a system level so affects the normal am/fm radio too? is it a replacement to V4A or can we use both?
Click to expand...
Click to collapse
Powered by system level. It does not apply to the radio.
It can be used in conjunction with V4A
kumarai said:
Powered by system level. It does not apply to the radio.
It can be used in conjunction with V4A
Click to expand...
Click to collapse
Oh ok? Abit strange as you specifically say above that it does work for radio?
A long smoking datasheet audio codec, the log analysis of its calculated two registers that can improve a little bit the sound of the android (radio, DVD, aux in flight)
Click to expand...
Click to collapse
Sorry, corrected message.
English is not the native language
Just Beautifull
Today i tried this rom and i'm impressed. The speed and the sound are superb.
And also now i have full control over the subwoofer on my GS.
Thank you for your hard work.
Hi, just flashed this ROM today and I'm really satisfied. Great speed, rooted, that's match what I need. Great work!
I'm pretty impressed by this rom. I don't know if I can tell the difference between the audio quality, but it seems light weight and fairly fast. I like the option to delay the shutdown when you turn off the acc/power. I think I will stick with this rom for a while.
Can you provide any screenshots? Is everything working fine? What about 3G Sticks etc.
Octalus said:
Can you provide any screenshots? Is everything working fine? What about 3G Sticks etc.
Click to expand...
Click to collapse
Hi, its a great rom but my 3g stick doesn't works.......I'm going to replace it with a 3g WiFi router...
Nice. The delay shutdown feature is something I thought would be nice to have a while ago.. I'll give this ROM a shot too.
Anyone know which stock ROM this is based on?
hadeone said:
Nice. The delay shutdown feature is something I thought would be nice to have a while ago.. I'll give this ROM a shot too.
Click to expand...
Click to collapse
But does it work? KGL 1.53 had a option to delay shutdown. Problem was, it did nothing.
I don't think there are any ROMs yet that will offer a true standby feature.
vnamee said:
I'm pretty impressed by this rom. I don't know if I can tell the difference between the audio quality, but it seems light weight and fairly fast. I like the option to delay the shutdown when you turn off the acc/power. I think I will stick with this rom for a while.
Click to expand...
Click to collapse
Can you explain the option to delay shutdown please? Screenshots?
marchnz said:
Can you explain the option to delay shutdown please? Screenshots?
Click to expand...
Click to collapse
It's in the settings menu. I'll post a screen shot when I can. I set mine for 30 minutes. It definitely helps when I make short stops. When I turn the power/unit back on, the unit starts back up where it was on previously. It's similar to putting it to sleep I guess. I haven't timed it, but I assume after 30 minutes, it will do a full shut down. So if the unit is off longer than that, you will have to do a full boot after you restart it.
All the roms have this feature. Its standby mode and can be set for up to 2 hours. It does work and keeps the unit in standby so it wont have to boot for 30 seconds. I thought we were talking about a delayed shutdown so the music keeps playing for a bit after you shut the car off and take out the key.
Hello everyone, i haven't had any time to work with this for a while, but i'm happy to hear it works
If it's not clear, you don't need to update your ROM if you don't want to. setreg is general command that can be run when you are root, my job here was to compile it for MTCD. Some misc tools and datasheets including setreg tool can be found from http://uli.ulicode.fi/i2c/ . Tool is bit hackish, but work.
Big thanks to Kumarai for actually understanding what datasheet says I was poking wrong register addresses and that's why i could not get it working.
Nice thing about this mod is that it doesn't require any hardware mods and original EQU tools and such still work like they did before so you can easily finetune your audio.
In near future i will compile simple tool that would easily let you change EQU settings. However, even i managed to comiple NDK application, it's been years since i did any actualy Android apps with user interface, currently i have no clue how to control low level stuff like this from Android application...
Finally tried this today on my car and it really makes audio much better. What i did, i first opened Amplifier app and moved all EQ sliders to 0. I played some music and tried different settings and best for my car were :
setreg -y 4 0x1A 0x25 0x03 # 80Hz Gain +9
setreg -y 4 0x1A 0x2C 0x6A # 11.7kHz Gain +2
Now i had problem how to run these command automatically at every boot. Stock or Malaysk rom doesn't have support for scripts (init.d) that are automatically runned on every startup. However, system looks some commands in /system/bin at boot that are missing, so i simply copied my init script with correct name there.
So now when my unit boots up, it sets equ settings where i wan't them to be (makes HUGE difference) and i can finetune it still with Amplifier application.
Kumarai, how did you solve that problem how to run script on boot?
larppaxyz said:
Kumarai, how did you solve that problem how to run script on boot?
Click to expand...
Click to collapse
In the first stage of the experiment, using the program SManager, the program and scripts can be downloaded zde - https://yadi.sk/d/uJCcUkDjvKzcP
Now included in Malaysk ROM
I just installed latest Malaysk ROM (October 16 version) and i noticed that my setreg tool and Kumarai register scripts are included there. 7floor got all the credit for it but i think most important thing is that everyone can now enjoy it.
It's enabled by default and simply boosts bass at 80Hz and high frequency at 11Khz. Finetuning can be done with normal Amplifier application.
:good:
larppaxyz said:
I just installed latest Malaysk ROM (October 16 version) and i noticed that my setreg tool and Kumarai register scripts are included there. 7floor got all the credit for it but i think most important thing is that everyone can now enjoy it.
It's enabled by default and simply boosts bass at 80Hz and high frequency at 11Khz. Finetuning can be done with normal Amplifier application.
:good:
Click to expand...
Click to collapse
curious of you to say that, because i have that malaysk rom installed with V4A and the sound is way too sharp at higher volumes. I will play with stock amplifier settings and go from there
Related
Hi
I am trying to find the layout corresponding to my phone.
i don't know from each country the phone came from !!!
it's a qwerty
but the symbols are # from the US or Italian one
1 have
1 = !
2 = "
3 = @
4 = $
5 = %
6 = &
7 = /
8 = (
9= )
0 = =
Y = +
k = è
m = #
up = PGSU
down = PGGIU
Do you have any idea of the type of keyboard i have or the layout corresponding ?
Thanks
I don't know what country it's from, but it's using the eT9.Rhodium.0410.kmap.txt keyboard layout in the \Windows directory
// The mapping table is defined as follows
//
// VK_TPOUND = 0x78
// VK_TSTAR = 0x77
// VK_TAB = 0x09
//
// We do not support escape value yet. So the key/char values should be
// entered explicitly or by encoding start with 0x
//
// Format:
// {VK VK1 VK2 CH1 CH2}
// VK -> value from keyboard driver
// VK1 -> key mapped, interpret by IME
// VK2 -> key to interpret when for press and hold
// CH1 -> symbols produced by Fn + key
// CH2 -> symbols in 123 mode
// CH4 -> Key Index
// Row 1
{1 1 1 ! ! 0xff}
{2 2 2 " " 0xff}
{3 3 3 @ @ 0xff}
{4 4 4 $ $ 0xff}
{5 5 5 % % 0xff}
{6 6 6 & & 0xff}
{7 7 7 / / 0xff}
{8 8 8 ( ( 0xff}
{9 9 9 ) ) 0xff}
{0 0 0 = = 0xff}
// Row 2
{Q Q Q ^ ^ 0x00}
{W W W W W 0x01}
{E E E € € 0x02}
{R R R R R 0x03}
{T T T T T 0x04}
{Y Y Y + + 0x05}
{U U U Ù Ù 0x06}
{I I I Ì Ì 0x07}
{O O O Ò Ò 0x08}
{P P P * * 0x09}
// Row 3
{A A A À À 0x0a}
{S S S S S 0x0b}
{D D D D D 0x0c}
{F F F F F 0x0d}
{G G G ; ; 0x0e}
{H H H : : 0x0f}
{J J J É É 0x10}
{K K K È È 0x11}
{L L L ' ' 0x12}
{0x08 0x08 0x08 0xF02E 0xF02E 0xff} // BACKSPACE - 0x08 = VK_BACK, 0x2E = VK_DELETE
// Row 4
{0x10 0x10 0x10 0x14 0x00 0xff} // CAPS - 0x14 = VK_CAPITAL
{Z Z Z Z Z 0x13}
{X X X X X 0x14}
{C C C C C 0x15}
{V V V V V 0x16}
{B B B \ \ 0x17}
{N N N - - 0x18}
{M M M # # 0x19}
{0x26 0x26 0x26 0xF021 0xF021 0xff} // UP - 0x26 = VK_UP, 0x21 = VK_PRIOR (PAGE UP)
{0x0D 0x0D 0x0D 0x0D 0x0D 0xff} // ENTER - 0x0D = VK_RETURN
// Row 5
{0x11 0x11 0x00 0x00 0x00 0xff} // CTRL
{0xEC 0xEC 0x00 0x00 0x00 0xff} // FN - 0xEC = FN
{0xF2 0xF2 0x00 0x00 0x00 0xff} // MSG - 0xF2 = MSG
{0xBC , , 0xE9 0x00 0xff} // SYM - 0xE9
{0x20 0x20 0x20 0x12 0x20 0xff} // SPACE - 0x20 = VK_SPACE, 0x12 = XT9 Menu
{0xBE . . 0x93 0x00 0xff} // SMS - 0x93
{0x25 0x25 0x25 0x92 0x00 0xff} // LEFT - 0x25 = VK_LEFT
{0x28 0x28 0x28 0xF022 0xF022 0xff} // DOWN - 0x28 = VK_DOWN, 0x22 = VK_NEXT (PAGE DOWN)
{0x27 0x27 0x27 0xF3 0x00 0xff} // RIGHT - 0x27 = VK_RIGHT
{0xE9 0xE9 0xE9 0x00 0x00 0xff} // SYM - 0xE9
Thanks
But the 410 didn't work for me !
hklm\hardware\devicemap\keybd\curlang --> 410
but nothing
what are you trying to achieve?
you'll find out what keyboard layout your phone is using by going to HKLM\Software\Tegic\eT9\Ime\KeyboardLayouFiles
Hi can someone upload the build.prop file for the htc one x here or just copy and paste all the info here?? I'd greatly appreciate it! Thanks!
ro.ril.ecc.VODA-Africa-South=112,911,999
ro.ril.ecc.HTC-GCC=999,112,997
ro.ril.ecc.HTC-WWE=999
ro.ril.ecc.HTC-Dutch=112
ro.ril.ecc.HTC-SPA=112,911
ro.ril.ecc.HTC-FRA=112,911
ro.ril.ecc.HTC-ITA=112,911
ro.ril.ecc.HTC-EastEurope=112
ro.ril.enable.a52.HTC-ITA=1
ro.ril.enable.a53.HTC-ITA=1
ro.phone.min_match.HTC__Y13=7
ro.phone.min_match.HTC__J15=7
ro.phone.min_match.HTC__016=7
ro.phone.min_match.HTC__A07=7
ro.ril.enable.a52=0
ro.ril.enable.a53=1
ro.ril.enable.dtm=0
ro.ril.hsdpa.category=14
ro.ril.hsupa.category=6
ro.ril.hsxpa=4
ro.ril.fast.dormancy.rule=1
ro.ril.disable.fd.plmn.prefix=23402,23410,23411,23420,27202
ro.ril.enable.managed.roaming=1
ro.ril.enable.sdr=1
ro.ril.enable.amr.wideband=1
ro.ril.enable.r8fd=0
ro.ril.disable.cpc=1
ro.com.google.clientidbase=android-htc-rev
ro.ril.vmail.23415=1571,BT,121,VDF UK
ro.ril.vmail.27203=171
ro.ril.vmail.65502=181
ro.ril.vmail.27211=171
ro.ril.vmail.65510=100
ro.ril.vmail.22299=4133,3ITA
ro.ril.vmail.23410=901,O2 UK,905,TESCO,443,giffgaff
ro.ril.vmail.22201=41901,I TIM
ro.ril.vmail.22210=42020,Vodafone IT
ro.ril.vmail.22288=4200,I WIND
ro.product.model=HTC One X
ro.config.htc.enableCOTA=0
ro.watch.appid=com.sdgtl.watch.enru_40_ics_s
ro.ril.enable.pre_r8fd=1
ro.ril.fd.pre_r8_tout.scr_off=2
ro.ril.fd.pre_r8_tout.scr_on=3
ro.ril.fd.r8_tout.scr_off=0
ro.ril.fd.r8_tout.scr_on=0
dev.defaultwallpaper=/system/customize/resource/viper.jpg
ro.ril.imc.fdn=0
ro.ril.imc.dtmclass=0
ro.ril.imc.band=900,1800,1900,850
ro.ril.imc.uband="UMTS_BAND_I","UMTS_BAND_II","UMTS_BAND_V","UMTS_BAND_VIII"
ro.ril.imc.darp=1
ro.ril.imc.enhanced.fdpch=1
ro.ril.imc.fdpch=1
ro.ril.imc.edpdch.pw.interpo=1
ro.ril.imc.hspa.dtx.drx=1
ro.ril.imc.uea2=0
ro.ril.imc.uia2=0
ro.ril.edpcch.pwr.boost=1
ro.ril.hspa.mac.ehs=1
dev.deviceimage_large=/system/customize/resource/endeavor-black_187x370.png
dev.deviceimage_small=/system/customize/resource/endeavor-black_32x58.png
# begin build properties
# autogenerated by buildinfo.sh
ro.aa.customizationid=387160
ro.aa.romver=2.05.401.2
ro.aa.maincid=
ro.aa.cidlist=
ro.aa.rid=23
ro.aa.modelid=PJ4610000
ro.aa.report=com
ro.aa.project=ENDEAVOR_U_ICS_40_S
ro.aa.skulist=401
ro.aa.taskid=264601
ro.aa.mainsku=401
ro.cwkey=HTC__001
ro.com.google.clientidbase=android-htc
ro.build.id=IMM76D
ro.build.display.id=endeavoru-userdebug 4.0.4 IMM76D eng..20120602.215327 test-keys
ro.build.version.incremental=70826.2
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.4
ro.build.date=六 6月 2 21:54:39 CST 2012
ro.build.date.utc=1338645279
ro.build.type=userdebug
ro.build.user=
ro.build.host=ABM036
ro.build.tags=test-keys
ro.product.model=EndeavorU
ro.product.brand=htc_europe
ro.product.name=endeavoru
ro.product.device=endeavoru
ro.product.board=endeavoru
ro.product.cpu.abi=armeabi-v7a
ro.product.version=ViperX 1.0.1
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=xhdpi
ro.wifi.channels=
ro.board.platform=tegra
# ro.build.product is obsolete; use ro.product.device
ro.build.product=endeavoru
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=2.05.401.2 CL70826 test-keys
ro.build.changelist=70826
ro.build.fingerprint=htc_europe/endeavoru/endeavoru:4.0.4/IMM76D/70826.2:userdebug/test-keys
ro.build.characteristics=default
ro.build.project=ENDEAVOR_U_ICS_40_S:264601
ro.build.languageremove=0
ro.build.sense.version=4.0
keyguard.no_require_sim=1
# end build properties
dalvik.vm.heapsize=128m
dalvik.vm.heapgrowthlimit=64m
ro.opengles.version = 131072
wifi.interface=wlan0
wifi.softap.interface=wlan1
wifi.softapconcurrent.interface=wlan1
rild.libpath=/system/lib/libhtc_ril.so
# RilLibPath for Ganlite by William_Lai
rild.libpath.ganlite=/system/lib/librilswitch.so
rilswitch.vendorlibpath=/system/lib/libhtc_ril.so
rilswitch.ganlibpath=/system/lib/libganril.so
rild.libargs=-e wwan0
ro.sf.lcd_density=320
# RIL, for ATT feature
# ro.ril.att.feature=1
# ro.ril.enable.ucsq=2
# RIL, for BLUE feature
# ro.ril.ble.feature=1
# RIL, for IMC modem feature
ro.ril.enable.imc.feature=1
ro.ril.projectname=endeavoru
# RIL, parameters for register BLUE stk feature to modem
ro.ril.stkprof.param=FFFFFFFF7F1C00DF9703021F2200000083000000000040100000000000000000
# Icera fild
modem.fild.rootdir=/data/rfs
modem.fild.blocksize=65528
modem.fild.baudrate=3500000
modem.fild.hif=0
modem.fild.coredump=enabled
modem.fild.coredumpdir=/data/rfs/data/debug
modem.power.device=/sys/class/gpio/gpio32/value,0,1
ro.ril.devicename=/dev/ttyACM1
modem.powercontrol=disabled
# -----------------------------
# speaker volume is from 20 to 31
# this corresponds to -2dB to +8dB
# -----------------------------
audio.speaker.voice.0=20
audio.speaker.voice.1=21
audio.speaker.voice.2=24
audio.speaker.voice.3=26
audio.speaker.voice.4=28
audio.speaker.voice.5=31
# -----------------------------
# earpiece volume is from 20 to 31
# this corresponds to -2dB to +8dB
# -----------------------------
audio.earpiece.voice.0=20
audio.earpiece.voice.1=21
audio.earpiece.voice.2=24
audio.earpiece.voice.3=26
audio.earpiece.voice.4=28
audio.earpiece.voice.5=31
# -----------------------------------
# headset volume is from 9 to 14
# this corresponds to -34dB to -19dB
# ----------------------------------
audio.headset.voice.0=16
audio.headset.voice.1=19
audio.headset.voice.2=22
audio.headset.voice.3=25
audio.headset.voice.4=28
audio.headset.voice.5=31
persist.tegra.nvmmlite = 1
#export for global effects
htc.audio.global.state=0
htc.audio.global.profile=0
#export for SoundHound
persist.htc.audio.pcm.samplerate=48000
persist.htc.audio.pcm.channels=2
#export for HTCAEC
persist.audio.SupportHTCHWAEC=1
#export for CS/PS call switch
persist.audio.AutoSwitchMic=1
#NFC
debug.nfc.fw_download=true
debug.nfc.se=true
#Internal Storage
ro.phone_fat=1
#Low Phone Storage
ro.low_phone_storage=5
#Fat Rsvd Sectors
ro.fat_rsvd=66
#Relase Bluetooth HW/SW information
ro.bt.chipset = TI 1283
ro.bt.stack = TI BlueZ
ro.bt.stack.version = 1.1.0.3
#Wireless setting
ro.product.bluetooth = 4.0
ro.product.wifi = 802.11 a/b/g/n
init.svc.wpa_supplicant=
init.svc.dhcpcd_wlan0=
dhcp.wlan0.autoip=
dhcp.wlan0.dns1=
dhcp.wlan0.dns2=
dhcp.wlan0.dns3=
dhcp.wlan0.dns4=
dhcp.wlan0.gateway=
dhcp.wlan0.ipaddress=
dhcp.wlan0.leasetime=
dhcp.wlan0.mask=
dhcp.wlan0.ooxx=
dhcp.wlan0.pid=
dhcp.wlan0.reason=
dhcp.wlan0.result=
dhcp.wlan0.server=
net.wlan0.dns1=
net.wlan0.dns2=
wifi.wpa_supp_ready=
wlan.driver.status=
wifi.HostapdStarted=0
#display
ro.product.display_resolution = 4.7 inch 720p resolution
#camera
ro.product.main_camera = 8Mpx
ro.product.front_camera = 1.3Mpx
# Support HW reset dialog
ro.product.hwreset = 1
ro.product.hwreset.timer1 = 5
ro.product.hwreset.timer2 = 8
#Autobot car pc
ro.htc.htcmode.data.path = /dev/ttyHSUSB3
#hdmi
ro.hdmi.enable=true
#CPU / MEM info
ro.product.processor = nVidia Tegra 3 Quadcore
ro.product.ram = 1GB
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.com.android.dataroaming=false
drm.service.enabled=true
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=4.0_r2
ro.service.dpsvr.enabled=true
ro.vendor.extension_library=/system/lib/libhtc-opt2.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
tf.enable=y
# Disable debugging notify icon on statusbar
persist.adb.notify=0
pm.sleep_mode=150
power.saving.mode=1
Persist.sys.fw.camera.status=1
Persist.dmesg.mode=split
Persist.dmesg.rotate=1
#Others
debug.composition.type=dyn
# Disable HTCs Screenshot feature
ro.htc.framework.screencapture=false
# Enable 3 fingers swipe
ro.framework.gestureservice=1
#Ui Tweaks
windowsmgr.max_events_per_sec=200
persist.sys.NV_FPSLIMIT=60
persist.sys.skin=default
# Venom OTA
ro.config.venom.enableCOTA=1
ro.config.venom.nocheckin=0
ro.config.venom.noappupdate=0
settings.fota.saveto=cache
Gutterball said:
Hi can someone upload the build.prop file for the htc one x here or just copy and paste all the info here?? I'd greatly appreciate it! Thanks!
Click to expand...
Click to collapse
That's for team venom Rom. It's modded just don't use the venom ota part if it on stock and u should be good to go. Hope this helps
Sent from my HTC One X using xda premium
Thanks alot! Much appreciated!
Gutterball said:
Thanks alot! Much appreciated!
Click to expand...
Click to collapse
Your welcome.
Sent from my HTC One X using xda premium
Hi,
Does anyone have the stock GPS.config file?
Thanks
hill67 said:
Hi,
Does anyone have the stock GPS.config file?
Thanks
Click to expand...
Click to collapse
Stock from which rom / region?
Sorry,
I am in Europe, using RR ROM nougat 7.7.1 (so not stock, my mistake)
Code:
#Uncommenting these urls would only enable #the power up auto injection and force injection(test case). #XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra2.bin #XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra2.bin #XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra2.bin #ifdef VENDOR_EDIT # [email protected] add gps xtra server for speed up gps cold start XTRA_SERVER_1=http://xtrapath1.izatcloud.net/xtra3grc.bin XTRA_SERVER_2=http://xtrapath2.izatcloud.net/xtra3grc.bin XTRA_SERVER_3=http://xtrapath3.izatcloud.net/xtra3grc.bin #endif #Version check for XTRA #DISABLE = 0 #AUTO = 1 #XTRA2 = 2 #XTRA3 = 3 XTRA_VERSION_CHECK=0 # Error Estimate # _SET = 1 # _CLEAR = 0 ERR_ESTIMATE=0 #Test NTP_SERVER=time.gpsonextra.net #Asia # NTP_SERVER=asia.pool.ntp.org #Europe # NTP_SERVER=europe.pool.ntp.org #North America # NTP_SERVER=north-america.pool.ntp.org # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info # 4 - Debug, 5 - Verbose # If DEBUG_LEVEL is commented, Android's logging levels will be used DEBUG_LEVEL = 2 # Intermediate position report, 1=enable, 0=disable INTERMEDIATE_POS=0 # Below bit mask configures how GPS functionalities # should be locked when user turns off GPS on Settings # Set bit 0x1 if MO GPS functionalities are to be locked # Set bit 0x2 if NI GPS functionalities are to be locked # default - non is locked for backward compatibility #GPS_LOCK = 0 # supl version 1.0 SUPL_VER=0x10000 # Emergency SUPL, 1=enable, 0=disable SUPL_ES=0 #Choose PDN for Emergency SUPL #1 - Use emergency PDN #0 - Use regular SUPL PDN for Emergency SUPL USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1 #SUPL_MODE is a bit mask set in config.xml per carrier by default. #If it is uncommented here, this value will overwrite the value from #config.xml. #MSA=0X2 #MSB=0X1 #SUPL_MODE= # GPS Capabilities bit mask # SCHEDULING = 0x01 # MSB = 0x02 # MSA = 0x04 # ON_DEMAND_TIME = 0x10 # GEOFENCE = 0x20 # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE CAPABILITIES=0x37 # Accuracy threshold for intermediate positions # less accurate positions are ignored, 0 for passing all positions # ACCURACY_THRES=5000 ################################ ##### AGPS server settings ##### ################################ # FOR SUPL SUPPORT, set the following # SUPL_HOST=supl.host.com or IP # SUPL_PORT=1234 # FOR C2K PDE SUPPORT, set the following # C2K_HOST=c2k.pde.com or IP # C2K_PORT=1234 # Bitmask of slots that are available # for write/install to, where 1s indicate writable, # and the default value is 0 where no slots # are writable. For example, AGPS_CERT_WRITABLE_MASK # of b1000001010 makes 3 slots available # and the remaining 7 slots unwritable. #AGPS_CERT_WRITABLE_MASK=0 #################################### # LTE Positioning Profile Settings #################################### # 0: Enable RRLP on LTE(Default) # 1: Enable LPP_User_Plane on LTE # 2: Enable LPP_Control_Plane # 3: Enable both LPP_User_Plane and LPP_Control_Plane LPP_PROFILE = 2 ################################ # EXTRA SETTINGS ################################ # NMEA provider (1=Modem Processor, 0=Application Processor) NMEA_PROVIDER=0 # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE) SGLTE_TARGET=0 ################################################## # Select Positioning Protocol on A-GLONASS system ################################################## # 0x1: RRC CPlane # 0x2: RRLP UPlane # 0x4: LLP Uplane #ifndef [email protected] enable all bit mask for GLONASS #A_GLONASS_POS_PROTOCOL_SELECT = 0 #else A_GLONASS_POS_PROTOCOL_SELECT = 15 #endif
Save as gps.conf
I've been trying to build LineageOS on my laptop, but I get this error:
Code:
Fatal Error: Unable to find package java.lang in classpath or bootclasspath
Here is a part of the log:
Code:
including vendor/cm/vendorsetup.sh
Looking for dependencies in device/xiaomi/kenzo
Looking for dependencies in device/xiaomi/msm8956-common
Looking for dependencies in device/qcom/common
Dependencies file not found, bailing out.
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
LINEAGE_VERSION=14.1-20170819-UNOFFICIAL-kenzo
TARGET_PRODUCT=lineage_kenzo
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a53.a57
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.12.4-1-ARCH-x86_64-with-glibc2.2.5
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=NJH47F
OUT_DIR=/home/vinayak/android/lineage/out
============================================
make: Entering directory '/home/vinayak/android/lineage'
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
LINEAGE_VERSION=14.1-20170819-UNOFFICIAL-kenzo
TARGET_PRODUCT=lineage_kenzo
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a53.a57
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.12.4-1-ARCH-x86_64-with-glibc2.2.5
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=NJH47F
OUT_DIR=/home/vinayak/android/lineage/out
============================================
Running kati to generate build-lineage_kenzo.ninja...
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=7.1.2
LINEAGE_VERSION=14.1-20170819-UNOFFICIAL-kenzo
TARGET_PRODUCT=lineage_kenzo
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a53.a57
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.12.4-1-ARCH-x86_64-with-glibc2.2.5
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=NJH47F
OUT_DIR=/home/vinayak/android/lineage/out
============================================
build/core/binary.mk:37: camera.msm8952 uses kernel headers, but does not depend on them!
build/core/binary.mk:1253: external/deqp/Android.mk: libdeqp: Unused source files: \
build/core/binary.mk:1253: external/deqp/Android.mk: libdeqp: Unused source files: \
build/core/binary.mk:1253: external/pdfium/third_party/pdfiumbigint.mk: libpdfiumbigint: Unused source files: bigint/BigInteger.cc bigint/BigIntegerUtils.cc bigint/BigUnsigned.cc bigint/BigUnsignedInABase.cc
build/core/binary.mk:1253: external/pdfium/third_party/pdfiumbigint.mk: libpdfiumbigint: Unused source files: bigint/BigInteger.cc bigint/BigIntegerUtils.cc bigint/BigUnsigned.cc bigint/BigUnsignedInABase.cc
./external/speex/Android.mk:56: TODOArm64: enable neon in libspeex
build/core/package_internal.mk:143: Empty argument supplied to find-subdir-assets
build/core/package_internal.mk:143: Empty argument supplied to find-subdir-assets
Starting build with ninja
ninja: Entering directory `.'
[ 0% 6/49508] Aidl: framework <= frameworks/base/telephony/java/com/android/internal/telephony/ISmsSecurityAgent.aidl
[ 0% 7/49508] Aidl: framework <= frameworks/base/telephony/java/com/android/internal/telephony/ISmsSecurityService.aidl
[ 0% 8/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/themes/IThemeProcessingListener.aidl
[ 0% 9/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/weather/IRequestInfoListener.aidl
[ 0% 10/49508] Aidl: org.cyanogenmod.platform.internal <= vendor/cmsdk/sdk/src/java/org/cyanogenmod/internal/themes/IIconCacheManager.aidl
[ 0% 11/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/themes/IThemeService.aidl
[ 0% 12/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/media/ICMAudioService.aidl
[ 0% 13/49508] Aidl: org.cyanogenmod.platform.sdk <= vendor/cmsdk/sdk/src/java/cyanogenmod/weather/ICMWeatherManager.aidl
[ 0% 14/49508] target Java: framework-protos (/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes)
FAILED: /bin/bash -c "(rm -f /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes-full-debug.jar ) && (rm -rf /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes ) && (mkdir -p /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/ ) && (mkdir -p /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes ) && (for f in /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/libprotobuf-java-nano_intermediates/javalib.jar; do if [ ! -f \$f ]; then echo Missing file \$f; exit 1; fi; unzip -qo \$f -d /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes; done ) && (rm -rf /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/META-INF ) && (rm -f /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list ) && (touch /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list ) && (if [ -d \"/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/src\" ]; then find /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/src -name '*.java' -and -not -name '.*' >> /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list; fi ) && (tr ' ' '\\n' < /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list | build/tools/normalize_path.py | sort -u > /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list-uniq ) && (if [ -s /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list-uniq ] ; then javac -J-Xmx1024M -Xmaxerrs 9999999 -encoding UTF-8 -bootclasspath \"\" -classpath /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/core-libart_intermediates/classes.jar:/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/core-oj_intermediates/classes.jar:/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/libprotobuf-java-nano_intermediates/javalib.jar -extdirs \"\" -d /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes -g -source 1.8 -target 1.8 \\@/home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list-uniq || ( rm -rf /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes ; exit 41 ) fi ) && (rm -f /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list ) && (rm -f /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes/java-source-list-uniq ) && (jar -cf /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes-full-debug.jar -C /home/vinayak/android/lineage/out/target/common/obj/JAVA_LIBRARIES/framework-protos_intermediates/classes . )"
Fatal Error: Unable to find package java.lang in classpath or bootclasspath
[ 0% 14/49508] host C: libexpat <= external/expat/lib/xmltok.c
[ 0% 14/49508] host C: libexpat <= external/expat/lib/xmlparse.c
[ 0% 14/49508] host Java: rmtypedefs (/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/rmtypedefs_intermediates/classes)
[ 0% 14/49508] host Java: jarjar (/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/jarjar_intermediates/classes)
[ 0% 14/49508] host Java: doclava (/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes)
FAILED: /bin/bash -c "(rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar ) && (rm -rf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes ) && (mkdir -p /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/ ) && (mkdir -p /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes ) && (for f in /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/tagsouplib_intermediates/javalib.jar; do if [ ! -f \$f ]; then echo Missing file \$f; exit 1; fi; unzip -qo \$f -d /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes; done ) && (rm -rf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/META-INF ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list ) && (touch /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list ) && (echo -n 'external/doclava/src/com/google/doclava/AnnotationInstanceInfo.java external/doclava/src/com/google/doclava/AnnotationValueInfo.java external/doclava/src/com/google/doclava/AtLinksNavTree.java external/doclava/src/com/google/doclava/AttrTagInfo.java external/doclava/src/com/google/doclava/AttributeInfo.java external/doclava/src/com/google/doclava/ClassInfo.java external/doclava/src/com/google/doclava/ClearPage.java external/doclava/src/com/google/doclava/CodeTagInfo.java external/doclava/src/com/google/doclava/Comment.java external/doclava/src/com/google/doclava/ContainerInfo.java external/doclava/src/com/google/doclava/Converter.java external/doclava/src/com/google/doclava/DocFile.java external/doclava/src/com/google/doclava/DocInfo.java external/doclava/src/com/google/doclava/Doclava.java external/doclava/src/com/google/doclava/Doclava2.java external/doclava/src/com/google/doclava/DoclavaDiff.java external/doclava/src/com/google/doclava/Errors.java external/doclava/src/com/google/doclava/FederatedSite.java external/doclava/src/com/google/doclava/FederationTagger.java external/doclava/src/com/google/doclava/FieldInfo.java external/doclava/src/com/google/doclava/Hierarchy.java external/doclava/src/com/google/doclava/InfoBuilder.java external/doclava/src/com/google/doclava/InheritedTags.java external/doclava/src/com/google/doclava/JarUtils.java external/doclava/src/com/google/doclava/KeywordEntry.java external/doclava/src/com/google/doclava/LinkReference.java external/doclava/src/com/google/doclava/LiteralTagInfo.java external/doclava/src/com/google/doclava/MemberInfo.java external/doclava/src/com/google/doclava/MethodInfo.java external/doclava/src/com/google/doclava/NavTree.java external/doclava/src/com/google/doclava/PackageInfo.java external/doclava/src/com/google/doclava/PageMetadata.java external/doclava/src/com/google/doclava/ParamTagInfo.java external/doclava/src/com/google/doclava/ParameterInfo.java external/doclava/src/com/google/doclava/ParsedTagInfo.java external/doclava/src/com/google/doclava/Proofread.java external/doclava/src/com/google/doclava/Resolution.java external/doclava/src/com/google/doclava/Resolvable.java external/doclava/src/com/google/doclava/SampleCode.java external/doclava/src/com/google/doclava/SampleTagInfo.java external/doclava/src/com/google/doclava/Scoped.java external/doclava/src/com/google/doclava/SeeTagInfo.java external/doclava/src/com/google/doclava/SinceTagger.java external/doclava/src/com/google/doclava/Sorter.java external/doclava/src/com/google/doclava/SourcePositionInfo.java external/doclava/src/com/google/doclava/Stubs.java external/doclava/src/com/google/doclava/TagInfo.java external/doclava/src/com/google/doclava/TextTagInfo.java external/doclava/src/com/google/doclava/ThrowsTagInfo.java external/doclava/src/com/google/doclava/TodoFile.java external/doclava/src/com/google/doclava/TypeInfo.java external/doclava/src/com/google/doclava/apicheck/AbstractMethodInfo.java external/doclava/src/com/google/doclava/apicheck/ApiCheck.java external/doclava/src/com/google/doclava/apicheck/ApiFile.java external/doclava/src/com/google/doclava/apicheck/ApiInfo.java external/doclava/src/com/google/doclava/apicheck/ApiParseException.java external/doclava/src/com/google/doclava/apicheck/XmlApiFile.java external/doclava/src/com/google/doclava/parser/JavaLexer.java external/doclava/src/com/google/doclava/parser/JavaParser.java ' >> /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list ) && (if [ -d \"/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/src\" ]; then find /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/src -name '*.java' -and -not -name '.*' >> /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list; fi ) && (tr ' ' '\\n' < /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list | build/tools/normalize_path.py | sort -u > /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list-uniq ) && (if [ -s /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list-uniq ] ; then javac -J-Xmx1024M -Xmaxerrs 9999999 -encoding UTF-8 -classpath /home/vinayak/android/lineage/out/host/linux-x86/framework/antlr-runtime.jar:/home/vinayak/android/lineage/out/host/linux-x86/framework/guavalib.jar:/home/vinayak/android/lineage/out/host/linux-x86/framework/jsilver.jar:/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/tagsouplib_intermediates/javalib.jar:/usr/lib/jvm/java-8-openjdk/bin/../lib/tools.jar -extdirs \"\" -d /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes -g -source 1.8 -target 1.8 \\@/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list-uniq || ( rm -rf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes ; exit 41 ) fi ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes/java-source-list-uniq ) && (jar -cf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar -C /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes . ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list ) && (touch /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list ) && (echo -n '-C \"external/doclava/res\" \"assets/customizations/assets/customizations.css\" -C \"external/doclava/res\" \"assets/customizations/assets/customizations.js\" -C \"external/doclava/res\" \"assets/customizations/customizations.cs\" -C \"external/doclava/res\" \"assets/templates/assets/doclava-developer-core.css\" -C \"external/doclava/res\" \"assets/templates/assets/doclava-developer-docs.css\" -C \"external/doclava/res\" \"assets/templates/assets/doclava-developer-docs.js\" -C \"external/doclava/res\" \"assets/templates/assets/doclava-developer-reference.js\" -C \"external/doclava/res\" \"assets/templates/assets/images/bg_fade.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/bg_logo.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/body-gradient-tab.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/body-gradient.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/grad-rule-qv.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/hr_gray_main.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/hr_gray_side.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/left_off.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/left_on.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/preliminary.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-e.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-e2.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-eg.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-s.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-s2.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/resizable-sg.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/right_off.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/right_on.jpg\" -C \"external/doclava/res\" \"assets/templates/assets/images/sidenav-rule.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/spacer.gif\" -C \"external/doclava/res\" \"assets/templates/assets/images/triangle-closed-small.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/triangle-closed.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/triangle-opened-small.png\" -C \"external/doclava/res\" \"assets/templates/assets/images/triangle-opened.png\" -C \"external/doclava/res\" \"assets/templates/assets/jquery-history.js\" -C \"external/doclava/res\" \"assets/templates/assets/jquery-resizable.min.js\" -C \"external/doclava/res\" \"assets/templates/assets/prettify.js\" -C \"external/doclava/res\" \"assets/templates/assets/search_autocomplete.js\" -C \"external/doclava/res\" \"assets/templates/assets/style.css\" -C \"external/doclava/res\" \"assets/templates/assets/triangle-none.gif\" -C \"external/doclava/res\" \"assets/templates/at_links_navtree.cs\" -C \"external/doclava/res\" \"assets/templates/class.cs\" -C \"external/doclava/res\" \"assets/templates/classes.cs\" -C \"external/doclava/res\" \"assets/templates/components.cs\" -C \"external/doclava/res\" \"assets/templates/components/api_filter.cs\" -C \"external/doclava/res\" \"assets/templates/components/left_nav.cs\" -C \"external/doclava/res\" \"assets/templates/components/masthead.cs\" -C \"external/doclava/res\" \"assets/templates/components/search_box.cs\" -C \"external/doclava/res\" \"assets/templates/data.hdf\" -C \"external/doclava/res\" \"assets/templates/designpage.cs\" -C \"external/doclava/res\" \"assets/templates/diff.cs\" -C \"external/doclava/res\" \"assets/templates/docpage.cs\" -C \"external/doclava/res\" \"assets/templates/doctype.cs\" -C \"external/doclava/res\" \"assets/templates/footer.cs\" -C \"external/doclava/res\" \"assets/templates/head_tag.cs\" -C \"external/doclava/res\" \"assets/templates/header.cs\" -C \"external/doclava/res\" \"assets/templates/hierarchy.cs\" -C \"external/doclava/res\" \"assets/templates/index.cs\" -C \"external/doclava/res\" \"assets/templates/jd_lists.cs\" -C \"external/doclava/res\" \"assets/templates/jd_lists_unified.cs\" -C \"external/doclava/res\" \"assets/templates/keywords.cs\" -C \"external/doclava/res\" \"assets/templates/lists.cs\" -C \"external/doclava/res\" \"assets/templates/macros.cs\" -C \"external/doclava/res\" \"assets/templates/navtree_data.cs\" -C \"external/doclava/res\" \"assets/templates/nosidenavpage.cs\" -C \"external/doclava/res\" \"assets/templates/package-list.cs\" -C \"external/doclava/res\" \"assets/templates/package.cs\" -C \"external/doclava/res\" \"assets/templates/packages.cs\" -C \"external/doclava/res\" \"assets/templates/sample.cs\" -C \"external/doclava/res\" \"assets/templates/sampleindex.cs\" -C \"external/doclava/res\" \"assets/templates/timestamp.cs\" -C \"external/doclava/res\" \"assets/templates/todo.cs\" -C \"external/doclava/res\" \"assets/templates/trailer.cs\" -C \"external/doclava/res\" \"assets/templates/yaml_navtree.cs\" ' >> /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list ) && (jar uf /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar @/home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list ) && (rm -f /home/vinayak/android/lineage/out/host/common/obj/JAVA_LIBRARIES/doclava_intermediates/classes-full-debug.jar.jar-arg-list )"
external/doclava/src/com/google/doclava/AnnotationInstanceInfo.java:19: error: package com.google.clearsilver.jsilver.data does not exist
import com.google.clearsilver.jsilver.data.Data;
^
external/doclava/src/com/google/doclava/ClassInfo.java:19: error: package com.google.clearsilver.jsilver.data does not exist
import com.google.clearsilver.jsilver.data.Data;
^
external/doclava/src/com/google/doclava/DocInfo.java:19: error: package com.google.clearsilver.jsilver.data does not exist
import com.google.clearsilver.jsilver.data.Data;
^
external/doclava/src/com/google/doclava/AnnotationInstanceInfo.java:127: error: cannot find symbol
public static void makeLinkListHDF(Data data, String base, AnnotationInstanceInfo[] annotations) {
^
symbol: class Data
location: class AnnotationInstanceInfo
external/doclava/src/com/google/doclava/TypeInfo.java:19: error: package com.google.clearsilver.jsilver.data does not exist
import com.google.clearsilver.jsilver.data.Data;
.
.
.
.
.
symbol: class BitSet
location: class JavaParser
external/doclava/src/com/google/doclava/TodoFile.java:67: error: cannot find symbol
Data data = Doclava.makeHDF();
^
symbol: class Data
location: class TodoFile
Note: Some input files use unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
10844 errors
ninja: build stopped: subcommand failed.
make: Leaving directory '/home/vinayak/android/lineage'
[0;31m#### make failed to build some targets (53 seconds) ####[00m
va6996 said:
I've been trying to build LineageOS on my laptop, but I get this error...
Click to expand...
Click to collapse
The following link reflects a possible solution that is similar to your error within it.
https://forum.xda-developers.com/showthread.php?t=2259929&page=3
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!
Ibuprophen said:
The following link reflects a possible solution that is similar to your error within it.
https://forum.xda-developers.com/showthread.php?t=2259929&page=3
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!
Click to expand...
Click to collapse
Thanks a lot! I also realized I had to make clean because it wasn't removing the regenerated files.
va6996 said:
Thanks a lot! I also realized I had to make clean because it wasn't removing the regenerated files.
Click to expand...
Click to collapse
There's also a bunch of threads out there that are very helpful for building ROM's.
Here's just a few of them that could help you out too in case the other link may not work out for you.
[NEW][GUIDE] How-to build LineageOS 14.1 [SIMPLE][USER-FRIENDLY] by FSadino
[HOW TO] Beginners Guide to Android ROM Development by isidromxz
[GUIDE][COMPLETE] Android ROM Development From Source To End by jackeagle
To be honest, I've got an understanding on ROM development but, I've never, personally, developed any. I've only really stuck to developing apps.
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!
Ibuprophen said:
There's also a bunch of threads out there that are very helpful for building ROM's.
Here's just a few of them that could help you out too in case the other link may not work out for you.
[NEW][GUIDE] How-to build LineageOS 14.1 [SIMPLE][USER-FRIENDLY] by FSadino
[HOW TO] Beginners Guide to Android ROM Development by isidromxz
[GUIDE][COMPLETE] Android ROM Development From Source To End by jackeagle
To be honest, I've got an understanding on ROM development but, I've never, personally, developed any. I've only really stuck to developing apps.
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!
Click to expand...
Click to collapse
Thanks a lot! I was finally able to build it. However, I see that ccache isn't working for me for some reason. The ccache directory size is just 56MB. The build takes the same amount of time ~5hr(on my laptop). I've even set the cache size as 70GB. However, my out directory is 55.7GB. What am I doing wrong?
Probable relevant parts:
Code:
[ 99% 40898/40912] Target cache fs ima...age/out/target/product/kenzo/cache.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img ext4 cache 268435456 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L cache -l 268435456 -a cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label: cache
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16384 inodes and 2089/65536 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img', 'ext4', 'cache', '268435456', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'cache', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img maxsize=273985536 blocksize=135168 total=6398184 reserve=2838528
[ 99% 40904/40912] Construct recovery from boot
failed to reconstruct target deflate chunk 1 [(null)]; treating as normal
chunk 0: type 0 start 0 len 9041930
chunk 1: type 2 start 9041930 len 4148992
chunk 2: type 0 start 10711741 len 1347
Construct patches for 3 chunks...
patch 0 is 205 bytes (of 9041930)
patch 1 is 5082118 bytes (of 1669811)
patch 2 is 152 bytes (of 1347)
chunk 0: normal ( 0, 9041930) 205
chunk 1: deflate ( 9041930, 7662273) 5082118 (null)
chunk 2: normal ( 16704203, 1333) 152
[ 99% 40904/40912] Target userdata fs .../out/target/product/kenzo/userdata.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img ext4 data 26838785024 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L data -l 26838785024 -a data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 26838781952
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label: data
Blocks: 6552437
Block groups: 200
Reserved block group size: 1024
Created filesystem with 38/1638400 inodes and 150074/6552437 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img', 'ext4', 'data', '26838785024', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'data', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img maxsize=27400671936 blocksize=135168 total=155432808 reserve=276824064
[ 99% 40908/40912] Target system fs im...G/systemimage_intermediates/system.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img ext4 system 2684354560 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L system -l 2684354560 -a system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label: system
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 3340/163840 inodes and 292571/655360 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img', 'ext4', 'system', '2684354560', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'system', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
[ 99% 40909/40912] Install system fs i...ge/out/target/product/kenzo/system.img
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system.img+/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p maxsize=2740531200 blocksize=135168 total=1160426351 reserve=27709440
[ 99% 40910/40912] Package target file...eage_kenzo-target_files-d4b338b746.zip
using prebuilt recovery.img from BOOTABLE_IMAGES...
using prebuilt boot.img from BOOTABLE_IMAGES...
putting script in bin/install-recovery.sh
running: unzip -o -q /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/target_files_intermediates/lineage_kenzo-target_files-d4b338b746.zip -d /tmp/targetfiles-cmkmqI
++++ boot ++++
using prebuilt boot.img from BOOTABLE_IMAGES...
++++ recovery ++++
using prebuilt recovery.img from BOOTABLE_IMAGES...
++++ recovery (two-step image) ++++
building image from target_files RECOVERY...
running: mkbootfs -f /tmp/targetfiles-cmkmqI/META/recovery_filesystem_config.txt /tmp/targetfiles-cmkmqI/RECOVERY/RAMDISK
running: minigzip
running: /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/mkbootimg --kernel /tmp/targetfiles-cmkmqI/RECOVERY/kernel --cmdline androidboot.hardware=qcom ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 ramoops_memreserve=4M buildvariant=userdebug --base 0x80000000 --pagesize 2048 --ramdisk_offset 0x01000000 --tags_offset 0x00000100 --os_version 7.1.2 --os_patch_level 2017-08-05 --ramdisk /tmp/tmpFzhpAo --output /tmp/tmpBQOvrL
++++ system ++++
creating system.img...
BuildImage: in_dir = /tmp/targetfiles-cmkmqI/system, out_file = /tmp/system-d7Wo62.img
fs type is not ext4
Running: mkuserimg.sh -s /tmp/targetfiles-cmkmqI/system /tmp/system-d7Wo62.img ext4 system 2684354560 -T 1230748200 -C /tmp/targetfiles-cmkmqI/META/filesystem_config.txt -B /tmp/system-blocklist-OsEPwM.map -L system /tmp/targetfiles-cmkmqI/META/file_contexts.bin
make_ext4fs -s -T 1230748200 -S /tmp/targetfiles-cmkmqI/META/file_contexts.bin -C /tmp/targetfiles-cmkmqI/META/filesystem_config.txt -B /tmp/system-blocklist-OsEPwM.map -L system -l 2684354560 -a system /tmp/system-d7Wo62.img /tmp/targetfiles-cmkmqI/system
loaded 3332 fs_config entries
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label: system
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 3342/163840 inodes and 292951/655360 blocks
Running ['mkuserimg.sh', '-s', '/tmp/targetfiles-cmkmqI/system', '/tmp/system-d7Wo62.img', 'ext4', 'system', '2684354560', '-T', '1230748200', '-C', '/tmp/targetfiles-cmkmqI/META/filesystem_config.txt', '-B', '/tmp/system-blocklist-OsEPwM.map', '-L', 'system', '/tmp/targetfiles-cmkmqI/META/file_contexts.bin'] command, exit code = 0
++++ userdata ++++
creating userdata.img...
BuildImage: in_dir = /tmp/tmpbdwQbq/data, out_file = /tmp/tmpucca6X
fs type is not ext4
Running: mkf2fsuserimg.sh /tmp/tmpucca6X 26838785024
in mkf2fsuserimg.sh PATH=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/:/usr/lib/jvm/java-8-openjdk/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/development/scripts:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/devtools/tools:/run/media/vinayak/6FA49F144DC575A7/android/lineage/external/selinux/prebuilts/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/android-emulator/linux-x86_64:/home/vinayak/venv/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
make_f2fs -l 26838785024 /tmp/tmpucca6X
Info: zone aligned segment0 blkaddr: 512
Info: Overprovision ratio = 1.250%
Info: Overprovision segments = 323 (GC reserved = 167)
Running ['mkf2fsuserimg.sh', '/tmp/tmpucca6X', '26838785024'] command, exit code = 0
userdata size (14) is 0.00% of limit (26838785024)
++++ extrauserdata ++++
++++ cache ++++
creating cache.img...
BuildImage: in_dir = /tmp/tmpQp6j5q/cache, out_file = /tmp/tmpPUYQ9G
fs type is not ext4
Running: mkf2fsuserimg.sh /tmp/tmpPUYQ9G 268435456
in mkf2fsuserimg.sh PATH=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/:/usr/lib/jvm/java-8-openjdk/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/development/scripts:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/devtools/tools:/run/media/vinayak/6FA49F144DC575A7/android/lineage/external/selinux/prebuilts/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/android-emulator/linux-x86_64:/home/vinayak/venv/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
make_f2fs -l 268435456 /tmp/tmpPUYQ9G
Info: zone aligned segment0 blkaddr: 512
Info: Overprovision ratio = 15.000%
Info: Overprovision segments = 35 (GC reserved = 21)
Running ['mkf2fsuserimg.sh', '/tmp/tmpPUYQ9G', '268435456'] command, exit code = 0
cache size (14) is 0.00% of limit (268435456)
done.
[ 99% 40911/40912] Package OTA: /run/m...kenzo/lineage_kenzo-ota-d4b338b746.zip
unzipping target target-files...
running: unzip -o -q /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/target_files_intermediates/lineage_kenzo-target_files-d4b338b746.zip -d /tmp/targetfiles-Rnr8Wy
--- target info ---
blockimgdiff_versions = (str) 1,2,3,4
blocksize = (int) 131072
boot_size = (int) 67108864
build.prop = (dict) {'persist.audio.dirac.speaker': 'true', 'ro.sys.sdcardfs': 'true', 'persist.audio.fluence.speaker': 'true', 'bluetooth.hfp.client': '1', 'audio.safx.pbe.enabled': 'true', 'dalvik.vm.isa.arm.variant': 'cortex-a53.a57', 'ro.product.cpu.abilist': 'arm64-v8a,armeabi-v7a,armeabi', 'debug.enable.sglscale': '1', 'ro.build.product': 'kenzo', 'persist.data.iwlan.enable': 'true', 'ro.build.id': 'NJH47F', 'ro.hwui.gradient_cache_size': '1', 'dalvik.vm.stack-trace-file': '/data/anr/traces.txt', 'ro.product.cpu.abilist32': 'armeabi-v7a,armeabi', 'ro.build.selinux': '1', 'ro.qc.sdk.audio.fluencetype': 'fluence', 'tunnel.audio.encode': 'false', 'ro.frp.pst': '/dev/block/bootdevice/by-name/config', 'af.fast_track_multiplier': '1', 'dalvik.vm.lockprof.threshold': '500', 'ro.build.fingerprint': 'Xiaomi/kenzo/kenzo:6.0.1/MMB29M/V8.2.1.0.MHOCNDL:user/release-keys', 'ro.product.manufacturer': 'Xiaomi', 'dalvik.vm.isa.arm64.features': 'default', 'audio.offload.pcm.24bit.enable': 'false', 'persist.radio.cs_srv_type': '1', 'ro.hwui.layer_cache_size': '48', 'ro.build.description': 'kenzo-user 6.0.1 MMB29M V8.2.1.0.MHOCNDL release-keys', 'ro.bootimage.build.fingerprint': 'Xiaomi/lineage_kenzo/kenzo:7.1.2/NJH47F/d4b338b746:userdebug/test-keys', 'ro.product.cpu.abi': 'arm64-v8a', 'ro.sys.fw.dex2oat_thread_count': '4', 'ro.product.brand': 'Xiaomi', 'wifi.interface': 'wlan0', 'ro.cm.build.version.plat.sdk': '7', 'ro.product.model': 'Redmi Note 3', 'persist.radio.redir_party_num': '0', 'media.camera.ts.monotonic': '1', 'ro.cmlegal.url': 'https://lineageos.org/legal', 'persist.audio.fluence.voicecall': 'true', 'persist.cne.feature': '1', 'media.msm8956hw': '1', 'audio.offload.multiple.enabled': 'false', 'persist.demo.hdmirotationlock': 'false', 'ro.build.host': 'skynet', 'ro.build.version.security_patch': '2017-08-05', 'telephony.lteOnCdmaDevice': '1', 'media.sf.extractor-plugin': 'libffmpeg_extractor.so', 'ro.product.locale': 'en-US', 'audio.offload.min.duration.secs': '30', 'ro.btconfig.vendor': 'qcom', 'persist.audio.fluence.voicerec': 'true', 'audio.offload.video': 'false', 'dalvik.vm.isa.arm64.variant': 'generic', 'mmp.enable.3g2': 'true', 'persist.radio.NO_STAPA': '1', 'persist.hwc.downscale_threshold': '1.15', 'persist.sys.dalvik.vm.lib.2': 'libart.so', 'persist.loc.nlp_name': 'com.qualcomm.location', 'ro.board.platform': 'msm8952', 'voice.playback.conc.disabled': 'true', 'persist.data.qmi.adb_logmask': '0', 'ro.product.cpu.abilist64': 'arm64-v8a', 'audio.playback.mch.downsample': 'true', 'net.tcp.2g_init_rwnd': '10', 'ro.vendor.extension_library': 'libqti-perfd-client.so', 'persist.radio.multisim.config': 'dsds', 'persist.rild.nitz_long_ons_3': '', 'persist.rild.nitz_long_ons_2': '', 'persist.rild.nitz_long_ons_1': '', 'persist.rild.nitz_long_ons_0': '', 'ro.build.flavor': 'lineage_kenzo-userdebug', 'dalvik.vm.isa.arm.features': 'default', 'audio.deep_buffer.media': 'true', 'rild.libargs': '-d /dev/smd0', 'ro.gps.agps_provider': '1', 'persist.rild.nitz_short_ons_0': '', 'ro.build.version.release': '7.1.2', 'ro.build.version.codename': 'REL', 'DEVICE_PROVISIONED': '1', 'audio.offload.disable': '1', 'net.bt.name': 'Android', 'persist.data.netmgrd.qos.enable': 'true', 'ro.hwui.text_large_cache_width': '2048', 'persist.audio.fluence.audiorec': 'false', 'persist.radio.VT_HYBRID_ENABLE': '1', 'ro.opengles.version': '196610', 'use.voice.path.for.pcm.voip': 'true', 'persist.rild.nitz_plmn': '', 'ro.hwui.text_small_cache_height': '1024', 'ro.build.display.id': 'lineage_kenzo-userdebug 7.1.2 NJH47F d4b338b746 test-keys', 'audio.offload.pcm.16bit.enable': 'false', 'persist.radio.hw_mbn_update': '0', 'ro.config.ringtone': 'Orion.ogg', 'persist.radio.force_on_dc': 'true', 'persist.gps.qc_nlp_in_use': '1', 'debug.egl.hw': '0', 'ro.storage_manager.enabled': 'true', 'ro.carrier': 'unknown', 'ro.product.board': 'msm8952', 'ro.build.version.preview_sdk': '0', 'ro.com.google.clientidbase': 'android-xiaomi', 'persist.radio.start_ota_daemon': '1', 'ro.cm.build.version.plat.rev': '0', 'persist.timed.enable': 'true', 'ro.build.date': 'Tue Aug 22 13:26:20 IST 2017', 'ro.use_data_netmgrd': 'true', 'persist.radio.sib16_support': '1', 'qcom.bluetooth.soc': 'smd', 'ro.build.date.utc': '1503388580', 'audio.offload.buffer.size.kb': '64', 'keyguard.no_require_sim': 'true', 'ro.qc.sdk.audio.ssr': 'false', 'voice.conc.fallbackpath': 'deep-buffer', 'persist.dpm.feature': '5', 'ro.cm.display.version': '14.1-20170822-UNOFFICIAL-kenzo', 'ro.build.version.all_codenames': 'REL', 'mm.enable.smoothstreaming': 'true', 'ro.btconfig.if': 'smd', 'persist.dbg.vt_avail_ovr': '1', 'dev.pm.dyn_samplingrate': '1', 'ro.build.type': 'userdebug', 'ro.hwui.text_small_cache_width': '1024', 'voice.record.conc.disabled': 'false', 'ro.cm.version': '14.1-20170822-UNOFFICIAL-kenzo', 'persist.radio.sw_mbn_update': '0', 'ro.product.name': 'lineage_kenzo', 'ro.hwui.drop_shadow_cache_size': '6', 'ro.build.version.base_os': '', 'ro.telephony.call_ring.multiple': 'false', 'voice.voip.conc.disabled': 'true', 'persist.data.mode': 'concurrent', 'media.sf.omx-plugin': 'libffmpeg_omx.so', 'ro.expect.recovery_id': '0x22ab51ee62435272df9ab420618c4be9c94727ed000000000000000000000000', 'ro.telephony.default_network': '22,20', 'ro.wifi.channels': '', 'ro.hwui.r_buffer_cache_size': '8', 'persist.camera.HAL3.enabled': '1', 'ro.modversion': '14.1-20170822-UNOFFICIAL-kenzo', 'ro.build.characteristics': 'default', 'debug.mdpcomp.logs': '0', 'audio.offload.gapless.enabled': 'true', 'ro.build.version.incremental': 'd4b338b746', 'ro.config.alarm_alert': 'Hassium.ogg', 'ro.hwui.text_large_cache_height': '1024', 'rild.libpath': '/vendor/lib64/libril-qc-qmi-1.so', 'ro.build.tags': 'test-keys', 'ro.sf.lcd_density': '480', 'ro.build.version.sdk': '25', 'ro.cm.releasetype': 'UNOFFICIAL', 'audio.dolby.ds2.enabled': 'true', 'persist.audio.fluence.spk.mono': 'true', 'ril.subscription.types': 'RUIM', 'persist.dpm.nsrm.bkg.evt': '3955', 'ro.build.user': 'vinayak', 'persist.dbg.volte_avail_ovr': '1', 'ro.hwui.path_cache_size': '32', 'ro.product.device': 'kenzo', 'debug.sf.hw': '0', 'persist.rild.nitz_short_ons_1': '', 'persist.rild.nitz_short_ons_2': '', 'persist.rild.nitz_short_ons_3': '', 'persist.radio.rat_on': 'combine', 'ro.btconfig.dev': '/dev/smd3', 'ro.hwui.texture_cache_flushrate': '0.4', 'ro.hwui.texture_cache_size': '72', 'ro.cm.device': 'kenzo', 'audio_hal.period_size': '192', 'ro.btconfig.chip': 'WCN3680', 'ro.telephony.default_cdma_sub': '0', 'persist.radio.apm_sim_not_pwdn': '1', 'persist.hwc.mdpcomp.enable': 'true', 'persist.radio.custom_ecc': '1', 'persist.sys.dun.override': '0', 'ro.config.notification_sound': 'Argon.ogg', 'audio.offload.track.enable': 'false', 'media.aac_51_output_enabled': 'true'}
cache_fs_type = (str) ext4
cache_size = (int) 268435456
default_system_dev_certificate = (str) build/target/product/security/testkey
device_type = (str) MMC
extfs_sparse_flag = (str) -s
extra_recovery_keys = (str) vendor/cm/build/target/product/security/lineage
fs_type = (str) ext4
fstab = (dict) {'/cache': <common.Partition object at 0x7f2d76e445d0>, '/boot': <common.Partition object at 0x7f2d76e44050>, '/system': <common.Partition object at 0x7f2d76e44950>, '/dsp': <common.Partition object at 0x7f2d76e44210>, '/frp': <common.Partition object at 0x7f2d76e44110>, '/persist': <common.Partition object at 0x7f2d76e44810>, '/recovery': <common.Partition object at 0x7f2d76e44750>, '/firmware': <common.Partition object at 0x7f2d76e44610>, '/data': <common.Partition object at 0x7f2d76e44550>, '/misc': <common.Partition object at 0x7f2d76e44790>}
fstab_version = (int) 2
mkbootimg_args = (str) --ramdisk_offset 0x01000000 --tags_offset 0x00000100
mkbootimg_version_args = (str) --os_version 7.1.2 --os_patch_level 2017-08-05
multistage_support = (str) 1
ota_override_device = (str) kate,kenzo
recovery_api_version = (int) 3
recovery_as_boot = (str)
recovery_mount_options = (str) ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc
recovery_size = (int) 67108864
selinux_fc = (str) /tmp/targetfiles-Rnr8Wy/META/file_contexts.bin
squashfs_sparse_flag = (str) -s
system_size = (int) 2684354560
tool_extensions = (str) device/xiaomi/kenzo/../common
update_rename_support = (str) 1
use_set_metadata = (str) 1
userdata_size = (int) 26838785024
unable to load device-specific module; assuming none
using prebuilt recovery.img from BOOTABLE_IMAGES...
using system.img from target-files
Total of 655360 4096-byte output blocks in 6263 input chunks.
Finding transfers...
Generating digraph...
Finding vertex sequence...
Reversing backward edges...
0/0 dependencies (0.00%) were violated; 0 source blocks stashed.
Improving vertex order...
Revising stash size...
Total 0 blocks (0 bytes) are packed as new blocks due to insufficient cache size.
Reticulating splines...
1156825088 1156825088 (100.00%) new __DATA
max stashed blocks: 0 (0 bytes), limit: 214748364 bytes (0.00%)
using prebuilt boot.img from BOOTABLE_IMAGES...
boot size (10713088) is 15.96% of limit (67108864)
running: openssl pkcs8 -in build/target/product/security/testkey.pk8 -inform DER -nocrypt
running: java -Xmx2048m -Djava.library.path=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/lib64 -jar /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/framework/signapk.jar -w build/target/product/security/testkey.x509.pem build/target/product/security/testkey.pk8 /tmp/tmpOsziEC /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/lineage_kenzo-ota-d4b338b746.zip
done.
[100% 40912/40912] build bacon
Package Complete: /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/lineage-14.1-20170822-UNOFFICIAL-kenzo.zip
make: Leaving directory '/run/media/vinayak/6FA49F144DC575A7/android/lineage'
#### make completed successfully (04:59:23 (hh:mm:ss)) ####
I recently started with building LineageOS. However, I see that ccache isn't working for me for some reason. The ccache directory size is just 56MB. The build takes the same amount of time ~5hr(on my laptop). I've even set the cache size as 70GB. However, my out directory is 55.7GB. What am I doing wrong?
Probable relevant log:
Code:
[ 99% 40898/40912] Target cache fs ima...age/out/target/product/kenzo/cache.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img ext4 cache 268435456 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L cache -l 268435456 -a cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 268435456
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 1024
Label: cache
Blocks: 65536
Block groups: 2
Reserved block group size: 15
Created filesystem with 11/16384 inodes and 2089/65536 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img', 'ext4', 'cache', '268435456', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'cache', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/cache.img maxsize=273985536 blocksize=135168 total=6398184 reserve=2838528
[ 99% 40904/40912] Construct recovery from boot
failed to reconstruct target deflate chunk 1 [(null)]; treating as normal
chunk 0: type 0 start 0 len 9041930
chunk 1: type 2 start 9041930 len 4148992
chunk 2: type 0 start 10711741 len 1347
Construct patches for 3 chunks...
patch 0 is 205 bytes (of 9041930)
patch 1 is 5082118 bytes (of 1669811)
patch 2 is 152 bytes (of 1347)
chunk 0: normal ( 0, 9041930) 205
chunk 1: deflate ( 9041930, 7662273) 5082118 (null)
chunk 2: normal ( 16704203, 1333) 152
[ 99% 40904/40912] Target userdata fs .../out/target/product/kenzo/userdata.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img ext4 data 26838785024 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L data -l 26838785024 -a data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 26838781952
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 32768
Label: data
Blocks: 6552437
Block groups: 200
Reserved block group size: 1024
Created filesystem with 38/1638400 inodes and 150074/6552437 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/data', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img', 'ext4', 'data', '26838785024', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'data', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/userdata.img maxsize=27400671936 blocksize=135168 total=155432808 reserve=276824064
[ 99% 40908/40912] Target system fs im...G/systemimage_intermediates/system.img
BuildImage: in_dir = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system, out_file = /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img
fs type is not ext4
Running: mkuserimg.sh -s /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img ext4 system 2684354560 -D /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system -L system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin
make_ext4fs -s -T -1 -S /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin -L system -l 2684354560 -a system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label: system
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 3340/163840 inodes and 292571/655360 blocks
Running ['mkuserimg.sh', '-s', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/systemimage_intermediates/system.img', 'ext4', 'system', '2684354560', '-D', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system', '-L', 'system', '/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/root/file_contexts.bin'] command, exit code = 0
[ 99% 40909/40912] Install system fs i...ge/out/target/product/kenzo/system.img
/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/system.img+/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p maxsize=2740531200 blocksize=135168 total=1160426351 reserve=27709440
[ 99% 40910/40912] Package target file...eage_kenzo-target_files-d4b338b746.zip
using prebuilt recovery.img from BOOTABLE_IMAGES...
using prebuilt boot.img from BOOTABLE_IMAGES...
putting script in bin/install-recovery.sh
running: unzip -o -q /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/target_files_intermediates/lineage_kenzo-target_files-d4b338b746.zip -d /tmp/targetfiles-cmkmqI
++++ boot ++++
using prebuilt boot.img from BOOTABLE_IMAGES...
++++ recovery ++++
using prebuilt recovery.img from BOOTABLE_IMAGES...
++++ recovery (two-step image) ++++
building image from target_files RECOVERY...
running: mkbootfs -f /tmp/targetfiles-cmkmqI/META/recovery_filesystem_config.txt /tmp/targetfiles-cmkmqI/RECOVERY/RAMDISK
running: minigzip
running: /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/mkbootimg --kernel /tmp/targetfiles-cmkmqI/RECOVERY/kernel --cmdline androidboot.hardware=qcom ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 ramoops_memreserve=4M buildvariant=userdebug --base 0x80000000 --pagesize 2048 --ramdisk_offset 0x01000000 --tags_offset 0x00000100 --os_version 7.1.2 --os_patch_level 2017-08-05 --ramdisk /tmp/tmpFzhpAo --output /tmp/tmpBQOvrL
++++ system ++++
creating system.img...
BuildImage: in_dir = /tmp/targetfiles-cmkmqI/system, out_file = /tmp/system-d7Wo62.img
fs type is not ext4
Running: mkuserimg.sh -s /tmp/targetfiles-cmkmqI/system /tmp/system-d7Wo62.img ext4 system 2684354560 -T 1230748200 -C /tmp/targetfiles-cmkmqI/META/filesystem_config.txt -B /tmp/system-blocklist-OsEPwM.map -L system /tmp/targetfiles-cmkmqI/META/file_contexts.bin
make_ext4fs -s -T 1230748200 -S /tmp/targetfiles-cmkmqI/META/file_contexts.bin -C /tmp/targetfiles-cmkmqI/META/filesystem_config.txt -B /tmp/system-blocklist-OsEPwM.map -L system -l 2684354560 -a system /tmp/system-d7Wo62.img /tmp/targetfiles-cmkmqI/system
loaded 3332 fs_config entries
Creating filesystem with parameters:
Size: 2684354560
Block size: 4096
Blocks per group: 32768
Inodes per group: 8192
Inode size: 256
Journal blocks: 10240
Label: system
Blocks: 655360
Block groups: 20
Reserved block group size: 159
Created filesystem with 3342/163840 inodes and 292951/655360 blocks
Running ['mkuserimg.sh', '-s', '/tmp/targetfiles-cmkmqI/system', '/tmp/system-d7Wo62.img', 'ext4', 'system', '2684354560', '-T', '1230748200', '-C', '/tmp/targetfiles-cmkmqI/META/filesystem_config.txt', '-B', '/tmp/system-blocklist-OsEPwM.map', '-L', 'system', '/tmp/targetfiles-cmkmqI/META/file_contexts.bin'] command, exit code = 0
++++ userdata ++++
creating userdata.img...
BuildImage: in_dir = /tmp/tmpbdwQbq/data, out_file = /tmp/tmpucca6X
fs type is not ext4
Running: mkf2fsuserimg.sh /tmp/tmpucca6X 26838785024
in mkf2fsuserimg.sh PATH=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/:/usr/lib/jvm/java-8-openjdk/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/development/scripts:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/devtools/tools:/run/media/vinayak/6FA49F144DC575A7/android/lineage/external/selinux/prebuilts/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/android-emulator/linux-x86_64:/home/vinayak/venv/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
make_f2fs -l 26838785024 /tmp/tmpucca6X
Info: zone aligned segment0 blkaddr: 512
Info: Overprovision ratio = 1.250%
Info: Overprovision segments = 323 (GC reserved = 167)
Running ['mkf2fsuserimg.sh', '/tmp/tmpucca6X', '26838785024'] command, exit code = 0
userdata size (14) is 0.00% of limit (26838785024)
++++ extrauserdata ++++
++++ cache ++++
creating cache.img...
BuildImage: in_dir = /tmp/tmpQp6j5q/cache, out_file = /tmp/tmpPUYQ9G
fs type is not ext4
Running: mkf2fsuserimg.sh /tmp/tmpPUYQ9G 268435456
in mkf2fsuserimg.sh PATH=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin/:/usr/lib/jvm/java-8-openjdk/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/gcc/linux-x86/arm/arm-linux-androideabi-4.9/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/development/scripts:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/devtools/tools:/run/media/vinayak/6FA49F144DC575A7/android/lineage/external/selinux/prebuilts/bin:/run/media/vinayak/6FA49F144DC575A7/android/lineage/prebuilts/android-emulator/linux-x86_64:/home/vinayak/venv/bin:/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/lib/jvm/default/bin:/usr/bin/site_perl:/usr/bin/vendor_perl:/usr/bin/core_perl
make_f2fs -l 268435456 /tmp/tmpPUYQ9G
Info: zone aligned segment0 blkaddr: 512
Info: Overprovision ratio = 15.000%
Info: Overprovision segments = 35 (GC reserved = 21)
Running ['mkf2fsuserimg.sh', '/tmp/tmpPUYQ9G', '268435456'] command, exit code = 0
cache size (14) is 0.00% of limit (268435456)
done.
[ 99% 40911/40912] Package OTA: /run/m...kenzo/lineage_kenzo-ota-d4b338b746.zip
unzipping target target-files...
running: unzip -o -q /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/obj/PACKAGING/target_files_intermediates/lineage_kenzo-target_files-d4b338b746.zip -d /tmp/targetfiles-Rnr8Wy
--- target info ---
blockimgdiff_versions = (str) 1,2,3,4
blocksize = (int) 131072
boot_size = (int) 67108864
build.prop = (dict) {'persist.audio.dirac.speaker': 'true', 'ro.sys.sdcardfs': 'true', 'persist.audio.fluence.speaker': 'true', 'bluetooth.hfp.client': '1', 'audio.safx.pbe.enabled': 'true', 'dalvik.vm.isa.arm.variant': 'cortex-a53.a57', 'ro.product.cpu.abilist': 'arm64-v8a,armeabi-v7a,armeabi', 'debug.enable.sglscale': '1', 'ro.build.product': 'kenzo', 'persist.data.iwlan.enable': 'true', 'ro.build.id': 'NJH47F', 'ro.hwui.gradient_cache_size': '1', 'dalvik.vm.stack-trace-file': '/data/anr/traces.txt', 'ro.product.cpu.abilist32': 'armeabi-v7a,armeabi', 'ro.build.selinux': '1', 'ro.qc.sdk.audio.fluencetype': 'fluence', 'tunnel.audio.encode': 'false', 'ro.frp.pst': '/dev/block/bootdevice/by-name/config', 'af.fast_track_multiplier': '1', 'dalvik.vm.lockprof.threshold': '500', 'ro.build.fingerprint': 'Xiaomi/kenzo/kenzo:6.0.1/MMB29M/V8.2.1.0.MHOCNDL:user/release-keys', 'ro.product.manufacturer': 'Xiaomi', 'dalvik.vm.isa.arm64.features': 'default', 'audio.offload.pcm.24bit.enable': 'false', 'persist.radio.cs_srv_type': '1', 'ro.hwui.layer_cache_size': '48', 'ro.build.description': 'kenzo-user 6.0.1 MMB29M V8.2.1.0.MHOCNDL release-keys', 'ro.bootimage.build.fingerprint': 'Xiaomi/lineage_kenzo/kenzo:7.1.2/NJH47F/d4b338b746:userdebug/test-keys', 'ro.product.cpu.abi': 'arm64-v8a', 'ro.sys.fw.dex2oat_thread_count': '4', 'ro.product.brand': 'Xiaomi', 'wifi.interface': 'wlan0', 'ro.cm.build.version.plat.sdk': '7', 'ro.product.model': 'Redmi Note 3', 'persist.radio.redir_party_num': '0', 'media.camera.ts.monotonic': '1', 'ro.cmlegal.url': 'https://lineageos.org/legal', 'persist.audio.fluence.voicecall': 'true', 'persist.cne.feature': '1', 'media.msm8956hw': '1', 'audio.offload.multiple.enabled': 'false', 'persist.demo.hdmirotationlock': 'false', 'ro.build.host': 'skynet', 'ro.build.version.security_patch': '2017-08-05', 'telephony.lteOnCdmaDevice': '1', 'media.sf.extractor-plugin': 'libffmpeg_extractor.so', 'ro.product.locale': 'en-US', 'audio.offload.min.duration.secs': '30', 'ro.btconfig.vendor': 'qcom', 'persist.audio.fluence.voicerec': 'true', 'audio.offload.video': 'false', 'dalvik.vm.isa.arm64.variant': 'generic', 'mmp.enable.3g2': 'true', 'persist.radio.NO_STAPA': '1', 'persist.hwc.downscale_threshold': '1.15', 'persist.sys.dalvik.vm.lib.2': 'libart.so', 'persist.loc.nlp_name': 'com.qualcomm.location', 'ro.board.platform': 'msm8952', 'voice.playback.conc.disabled': 'true', 'persist.data.qmi.adb_logmask': '0', 'ro.product.cpu.abilist64': 'arm64-v8a', 'audio.playback.mch.downsample': 'true', 'net.tcp.2g_init_rwnd': '10', 'ro.vendor.extension_library': 'libqti-perfd-client.so', 'persist.radio.multisim.config': 'dsds', 'persist.rild.nitz_long_ons_3': '', 'persist.rild.nitz_long_ons_2': '', 'persist.rild.nitz_long_ons_1': '', 'persist.rild.nitz_long_ons_0': '', 'ro.build.flavor': 'lineage_kenzo-userdebug', 'dalvik.vm.isa.arm.features': 'default', 'audio.deep_buffer.media': 'true', 'rild.libargs': '-d /dev/smd0', 'ro.gps.agps_provider': '1', 'persist.rild.nitz_short_ons_0': '', 'ro.build.version.release': '7.1.2', 'ro.build.version.codename': 'REL', 'DEVICE_PROVISIONED': '1', 'audio.offload.disable': '1', 'net.bt.name': 'Android', 'persist.data.netmgrd.qos.enable': 'true', 'ro.hwui.text_large_cache_width': '2048', 'persist.audio.fluence.audiorec': 'false', 'persist.radio.VT_HYBRID_ENABLE': '1', 'ro.opengles.version': '196610', 'use.voice.path.for.pcm.voip': 'true', 'persist.rild.nitz_plmn': '', 'ro.hwui.text_small_cache_height': '1024', 'ro.build.display.id': 'lineage_kenzo-userdebug 7.1.2 NJH47F d4b338b746 test-keys', 'audio.offload.pcm.16bit.enable': 'false', 'persist.radio.hw_mbn_update': '0', 'ro.config.ringtone': 'Orion.ogg', 'persist.radio.force_on_dc': 'true', 'persist.gps.qc_nlp_in_use': '1', 'debug.egl.hw': '0', 'ro.storage_manager.enabled': 'true', 'ro.carrier': 'unknown', 'ro.product.board': 'msm8952', 'ro.build.version.preview_sdk': '0', 'ro.com.google.clientidbase': 'android-xiaomi', 'persist.radio.start_ota_daemon': '1', 'ro.cm.build.version.plat.rev': '0', 'persist.timed.enable': 'true', 'ro.build.date': 'Tue Aug 22 13:26:20 IST 2017', 'ro.use_data_netmgrd': 'true', 'persist.radio.sib16_support': '1', 'qcom.bluetooth.soc': 'smd', 'ro.build.date.utc': '1503388580', 'audio.offload.buffer.size.kb': '64', 'keyguard.no_require_sim': 'true', 'ro.qc.sdk.audio.ssr': 'false', 'voice.conc.fallbackpath': 'deep-buffer', 'persist.dpm.feature': '5', 'ro.cm.display.version': '14.1-20170822-UNOFFICIAL-kenzo', 'ro.build.version.all_codenames': 'REL', 'mm.enable.smoothstreaming': 'true', 'ro.btconfig.if': 'smd', 'persist.dbg.vt_avail_ovr': '1', 'dev.pm.dyn_samplingrate': '1', 'ro.build.type': 'userdebug', 'ro.hwui.text_small_cache_width': '1024', 'voice.record.conc.disabled': 'false', 'ro.cm.version': '14.1-20170822-UNOFFICIAL-kenzo', 'persist.radio.sw_mbn_update': '0', 'ro.product.name': 'lineage_kenzo', 'ro.hwui.drop_shadow_cache_size': '6', 'ro.build.version.base_os': '', 'ro.telephony.call_ring.multiple': 'false', 'voice.voip.conc.disabled': 'true', 'persist.data.mode': 'concurrent', 'media.sf.omx-plugin': 'libffmpeg_omx.so', 'ro.expect.recovery_id': '0x22ab51ee62435272df9ab420618c4be9c94727ed000000000000000000000000', 'ro.telephony.default_network': '22,20', 'ro.wifi.channels': '', 'ro.hwui.r_buffer_cache_size': '8', 'persist.camera.HAL3.enabled': '1', 'ro.modversion': '14.1-20170822-UNOFFICIAL-kenzo', 'ro.build.characteristics': 'default', 'debug.mdpcomp.logs': '0', 'audio.offload.gapless.enabled': 'true', 'ro.build.version.incremental': 'd4b338b746', 'ro.config.alarm_alert': 'Hassium.ogg', 'ro.hwui.text_large_cache_height': '1024', 'rild.libpath': '/vendor/lib64/libril-qc-qmi-1.so', 'ro.build.tags': 'test-keys', 'ro.sf.lcd_density': '480', 'ro.build.version.sdk': '25', 'ro.cm.releasetype': 'UNOFFICIAL', 'audio.dolby.ds2.enabled': 'true', 'persist.audio.fluence.spk.mono': 'true', 'ril.subscription.types': 'RUIM', 'persist.dpm.nsrm.bkg.evt': '3955', 'ro.build.user': 'vinayak', 'persist.dbg.volte_avail_ovr': '1', 'ro.hwui.path_cache_size': '32', 'ro.product.device': 'kenzo', 'debug.sf.hw': '0', 'persist.rild.nitz_short_ons_1': '', 'persist.rild.nitz_short_ons_2': '', 'persist.rild.nitz_short_ons_3': '', 'persist.radio.rat_on': 'combine', 'ro.btconfig.dev': '/dev/smd3', 'ro.hwui.texture_cache_flushrate': '0.4', 'ro.hwui.texture_cache_size': '72', 'ro.cm.device': 'kenzo', 'audio_hal.period_size': '192', 'ro.btconfig.chip': 'WCN3680', 'ro.telephony.default_cdma_sub': '0', 'persist.radio.apm_sim_not_pwdn': '1', 'persist.hwc.mdpcomp.enable': 'true', 'persist.radio.custom_ecc': '1', 'persist.sys.dun.override': '0', 'ro.config.notification_sound': 'Argon.ogg', 'audio.offload.track.enable': 'false', 'media.aac_51_output_enabled': 'true'}
cache_fs_type = (str) ext4
cache_size = (int) 268435456
default_system_dev_certificate = (str) build/target/product/security/testkey
device_type = (str) MMC
extfs_sparse_flag = (str) -s
extra_recovery_keys = (str) vendor/cm/build/target/product/security/lineage
fs_type = (str) ext4
fstab = (dict) {'/cache': <common.Partition object at 0x7f2d76e445d0>, '/boot': <common.Partition object at 0x7f2d76e44050>, '/system': <common.Partition object at 0x7f2d76e44950>, '/dsp': <common.Partition object at 0x7f2d76e44210>, '/frp': <common.Partition object at 0x7f2d76e44110>, '/persist': <common.Partition object at 0x7f2d76e44810>, '/recovery': <common.Partition object at 0x7f2d76e44750>, '/firmware': <common.Partition object at 0x7f2d76e44610>, '/data': <common.Partition object at 0x7f2d76e44550>, '/misc': <common.Partition object at 0x7f2d76e44790>}
fstab_version = (int) 2
mkbootimg_args = (str) --ramdisk_offset 0x01000000 --tags_offset 0x00000100
mkbootimg_version_args = (str) --os_version 7.1.2 --os_patch_level 2017-08-05
multistage_support = (str) 1
ota_override_device = (str) kate,kenzo
recovery_api_version = (int) 3
recovery_as_boot = (str)
recovery_mount_options = (str) ext4=max_batch_time=0,commit=1,data=ordered,barrier=1,errors=panic,nodelalloc
recovery_size = (int) 67108864
selinux_fc = (str) /tmp/targetfiles-Rnr8Wy/META/file_contexts.bin
squashfs_sparse_flag = (str) -s
system_size = (int) 2684354560
tool_extensions = (str) device/xiaomi/kenzo/../common
update_rename_support = (str) 1
use_set_metadata = (str) 1
userdata_size = (int) 26838785024
unable to load device-specific module; assuming none
using prebuilt recovery.img from BOOTABLE_IMAGES...
using system.img from target-files
Total of 655360 4096-byte output blocks in 6263 input chunks.
Finding transfers...
Generating digraph...
Finding vertex sequence...
Reversing backward edges...
0/0 dependencies (0.00%) were violated; 0 source blocks stashed.
Improving vertex order...
Revising stash size...
Total 0 blocks (0 bytes) are packed as new blocks due to insufficient cache size.
Reticulating splines...
1156825088 1156825088 (100.00%) new __DATA
max stashed blocks: 0 (0 bytes), limit: 214748364 bytes (0.00%)
using prebuilt boot.img from BOOTABLE_IMAGES...
boot size (10713088) is 15.96% of limit (67108864)
running: openssl pkcs8 -in build/target/product/security/testkey.pk8 -inform DER -nocrypt
running: java -Xmx2048m -Djava.library.path=/run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/lib64 -jar /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/host/linux-x86/framework/signapk.jar -w build/target/product/security/testkey.x509.pem build/target/product/security/testkey.pk8 /tmp/tmpOsziEC /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/lineage_kenzo-ota-d4b338b746.zip
done.
[100% 40912/40912] build bacon
Package Complete: /run/media/vinayak/6FA49F144DC575A7/android/lineage/out/target/product/kenzo/lineage-14.1-20170822-UNOFFICIAL-kenzo.zip
make: Leaving directory '/run/media/vinayak/6FA49F144DC575A7/android/lineage'
#### make completed successfully (04:59:23 (hh:mm:ss)) ####
va6996 said:
I recently started with building LineageOS. However, I see that ccache isn't working for me for some reason. The ccache directory size is just 56MB. The build takes the same amount of time ~5hr(on my laptop). I've even set the cache size as 70GB. However, my out directory is 55.7GB. What am I doing wrong?...
Click to expand...
Click to collapse
Your better off posting your question on the following Official LineageOS thread for your device.
http://forum.xda-developers.com/showthread.php?t=3542491
Good Luck!
~~~~~~~~~~~~~~~
I Am The Egg Man,
They Are The Egg Men.
I Am The Walrus!
Coo Coo Cachoo!
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE