[SOLVED] Bricked OP3 / Corrupted System Parts - OnePlus 3 Questions & Answers

Hello world,
I've bricked my device after I tried to install a beta of FOS and was not able to go into recovery and boot the system.
I used fastboot to wipe my device and boot into recovery (TWRP 3.0.2-19), flashed a modem from here (https://www.androidfilehost.com/?fid=385026487222273358) and installed OxygenOS (with stock recovery)
But after installing my phone hang on the boot screen and ended in a blackscreen (with white LED)
After that I used the "OnePlus3 Unbrick Tool Full" (MsmDownloadTool V3.0) to debrick it again. After the second try it worked and I was able to boot into OOS, but wifi doesn't work, android don't recognize my SIM-Carts, in the About Phone Section android says "Baseband version: Unknown" and my phone reboots every few minutes
Solution:
pcarvalho said:
fix should be easy
u have EFS backups right? do this....
go in fastboot
check if connected
type these:
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot reboot
SIMs should work now
EMEIs should be ok too
Click to expand...
Click to collapse

download stock recovery + stock rom from the official one plus website downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.6 (copy and paste, cannot post url )
boot into fastboot, flash stock recovery, then boot into stock recovery,
choose Install from USB option, then adb sideload <filename>
reply if worked

Thanks for the fast answer
"Installation failed"
I've also tried cm13 with cm recovery but I got into a bootloop

wipe cache and date before
then try again with another usb port

Is your imei no are there?

seems like a corrupted efs. if you dont have a backup of your efs partition, then say goodbye to it.

stibo123 said:
download stock recovery + stock rom from the official one plus website downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.6 (copy and paste, cannot post url )
boot into fastboot, flash stock recovery, then boot into stock recovery,
choose Install from USB option, then adb sideload <filename>
reply if worked
Click to expand...
Click to collapse
+1

@stibo123 I've tried 3.2.7 with success
@rakesh595160 my EMEI is not avaible (But it's on the package of my phone, isn't it?)
@angdaminaman I have a backup of my efs partition. What use has the EFS partition?

I restored my EFS partition, but it changed nothing

does it work now?

stibo123 said:
does it work now?
Click to expand...
Click to collapse
No Wifi, no IMEI and it still reboot every few minutes

https://forums.oneplus.net/threads/solution-bricked-oneplus-one-recovery.306306/
try this and install recovery and rom again

stibo123 said:
https://forums.oneplus.net/threads/solution-bricked-oneplus-one-recovery.306306/
try this and install recovery and rom again
Click to expand...
Click to collapse
I know this tutorial, but I used this one (https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/), which is very similar but for the OP3

DanielL. said:
I know this tutorial, but I used this one (https://forums.oneplus.net/threads/guide-mega-unbrick-guide-for-a-hard-bricked-oneplus-3.452634/), which is very similar but for the OP3
Click to expand...
Click to collapse
but u can try it

stibo123 said:
but u can try it
Click to expand...
Click to collapse
Yes, but the ROM and the program is for the OnePlus One and not for the OnePlus 3

DanielL. said:
Yes, but the ROM and the program is for the OnePlus One and not for the OnePlus 3
Click to expand...
Click to collapse
okey sry

stibo123 said:
okey sry
Click to expand...
Click to collapse
No Problem
Now I trying to restore th EMEI with this (http://www.androidbrick.com/ultimat...agon-xiaomi-mi5-imei-and-baseband-repair-fix/), but USB debugging and the normal USB connection for transfering files

fix should be easy
u have EFS backups right? do this....
go in fastboot
check if connected
type these:
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot reboot
SIMs should work now
EMEIs should be ok too

pcarvalho said:
fix should be easy
u have EFS backups right? do this....
go in fastboot
check if connected
type these:
Fastboot erase modemst1
Fastboot erase modemst2
Fastboot reboot
SIMs should work now
EMEIs should be ok too
Click to expand...
Click to collapse
Thank you very much, solved the problem immediately
But why do I need now the EFS backup?

DanielL. said:
Thank you very much, solved the problem immediately
But why do I need now the EFS backup?
Click to expand...
Click to collapse
i had same issue and tried all and found this simple but crazy fix...
my best guess is the recovery tools write wrong data... but im no expert
keep EFS backups for...
in case u really do brick it
save it in a safe place
u r very welcome
cheers

Related

Phone completely bricked

Hi everyone !
Yesterday, I wanted to wipe cache for some reasons, and I stupidly restarted the phone while formatting cache.
Result :
-A bootloop at the firt restart, then a "Error !"
-Can't acces Recovery mode, "Error !". I tried power button+volum up, don't work.
-ADB don't work anymore, I can't see the phone via adb devices
The only thing I can do is execute fastboot commands in Windows. I successfully made a tethered TWRP recovery, but I seriously don't know what to do from here. I tried flahsing a ROM, but it didn't worked (still have Error !).
I tried install permanent TWRP (unofficial), but I can't acces it. Probably because my bootloader is locked.
So... what should I do ?
Fastboot format cache should do the trick.
KillerNo2 said:
Fastboot format cache should do the trick.
Click to expand...
Click to collapse
I tried it.
Still don't start correctly, don't forget that I did some **** to try to fix it :s
The ROM is probably also damaged...
EDIT : Now it don't show the Error ! anymore, it always return to fastboot mode...
Baldriksen said:
I tried it.
Still don't start correctly, don't forget that I did some **** to try to fix it :s
The ROM is probably also damaged...
EDIT : Now it don't show the Error ! anymore, it always return to fastboot mode...
Click to expand...
Click to collapse
After formating cache you should've been able to get into recovery mode, if not, download recovery image from here then:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash fastboot droidboot.img
You can always sideload stock roms from there.
KillerNo2 said:
After formating cache you should've been able to get into recovery mode, if not, download recovery image from here then:
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash fastboot droidboot.img
You can always sideload stock roms from there.
Click to expand...
Click to collapse
I get this :
">fastboot flash F:\recovery.img
unknown partition 'F:\recovery.img'
error: cannot determine image filename for 'F:\recovery.img'"
EDIT : oh **** sorry i misswrited the command é_è
EDIT 2 : THANKS ! I have acces to normal recovery. Can you tell me what should I do now ? (seriously don't want to make everything goes brick again ^^')
Baldriksen said:
I get this :
">fastboot flash F:\recovery.img
unknown partition 'F:\recovery.img'
error: cannot determine image filename for 'F:\recovery.img'"
Click to expand...
Click to collapse
Put all image files into the adb folder.
KillerNo2 said:
Put all image files into the adb folder.
Click to expand...
Click to collapse
Sorry, I edited my message, the error was from me.
So now I am on recovery... what should I do ?
Baldriksen said:
Sorry, I edited my message, the error was from me.
So now I am on recovery... what should I do ?
Click to expand...
Click to collapse
Download stock ROM from Asus site, and then sideload the ROM in recovery mode. Follow 3.2) Flashing Zenfone 2 via ADB in this thread.
KillerNo2 said:
Download stock ROM from Asus site, and then sideload the ROM in recovery mode.
Click to expand...
Click to collapse
Sideload with "Apply update from ADB" ?
The stock ROM is a zip of about 1.1GB ? I heard that their were update only package and full firmware ?
Baldriksen said:
Sideload with "Apply update from ADB" ?
The stock ROM is a zip of about 1.1GB ? I heard that their were update only package and full firmware ?
Click to expand...
Click to collapse
That zip file is a full firmware.
Thanks !
I did it and I have now the stock firmware installed correctly !
I have the same problem... But there is no option to fastboot format cache... only normal boot, power off, recovery mode... can't enter recovery mode either...
ndruqltn said:
I have the same problem... But there is no option to fastboot format cache... only normal boot, power off, recovery mode... can't enter recovery mode either...
Click to expand...
Click to collapse
You need to follow the steps in this thread to install drivers and adb package first. Fast boot firmat cache is the command that you should type in on your PC.
Just a thought but instead of trying to install anything through adb why not instal a pre-rooted rom img through fastboot too. You can always wipe out root with the next OTA...
I have already wipe cache and now boots up properly but the problem is that touch screen doesn't seem to work...
Can't connect my Zenfone 2 to my pc even though I have installed drivers and adb...

Twrp problem

Hello everyone here I have an error has 7 install any custom rom and I'm stuck on the logo 1+ it does not restart even with backup thank you for your help
can you boot into fastboot?
if yes, restore backup and erase userdata.
and try to flash twrp again (or another version)
washichi said:
can you boot into fastboot?
if yes, restore backup and erase userdata.
and try to flash twrp again (or another version)
Click to expand...
Click to collapse
Hello yes I have access to fastboot command but what type?
I have more backup my phone on my pc but yes
So how?
jejemc said:
Hello yes I have access to fastboot command but what type?
I have more backup my phone on my pc but yes
So how?
Click to expand...
Click to collapse
just use google "fastboot how to erase userdata"
make sure you are booted into fastboot and connected to pc, type in adb:
"fastboot erase userdata"
then reboot ("fastboot reboot")
washichi said:
just use google "fastboot how to erase userdata"
Click to expand...
Click to collapse
resolved
jejemc said:
resolved
Click to expand...
Click to collapse
did you erase userdata or what?
please post the solution for other people with the same problem...
washichi said:
did you erase userdata or what?
please post the solution for other people with the same problem...
Click to expand...
Click to collapse
Hello user data while not reflash rom stock, today and always error 7 or a custom rom to flash

Mi a2 Lite stuck at Fastboot - No recovery, no nothing! Help.

Hello,
I've unlocked the bootloader and installed twrp..
First thing that was strange was that after I've put the .zip file to the internal memory, and booted back to twrp, the files were not there.. after that I've rebooted the phone, it asked me for a password (I've had no password after I've unlocked the bootloader)...
I've puted the Linage OS and Gapps on the external sd card..
Went to recovery again tried to flash the linage OS, got some error, like step 1 step 2.. and then error, tried to reboot into system.. now it only boots into fastboot.. I can get it to the EDL.. However cant flash twrp.. I get the error - mdp image is corrupted..
So I'm stuck! Don't know what to do anymore..
Any help is much appreciated.
Bucika said:
Hello,
I've unlocked the bootloader and installed twrp..
First thing that was strange was that after I've put the .zip file to the internal memory, and booted back to twrp, the files were not there.. after that I've rebooted the phone, it asked me for a password (I've had no password after I've unlocked the bootloader)...
I've puted the Linage OS and Gapps on the external sd card..
Went to recovery again tried to flash the linage OS, got some error, like step 1 step 2.. and then error, tried to reboot into system.. now it only boots into fastboot.. I can get it to the EDL.. However cant flash twrp.. I get the error - mdp image is corrupted..
So I'm stuck! Don't know what to do anymore..
Any help is much appreciated.
Click to expand...
Click to collapse
For me the problem was that I didn´t formatted DATA!
did you?
anykill said:
For me the problem was that I didn´t formatted DATA!
did you?
Click to expand...
Click to collapse
Damn, no I didn't! But I can't boot into twrp anymore.. just fastboot..
fastboot.exe boot .\twrp-daisy-3.3.0-0-offain.img
adb.exe push .\lineage-16.0-20190601-UNOFFICIAL-daisy.zip sdcard
adb.exe push .\ForcedEncryptionDisablerDaisy.zip sdcard <------ you need to flash this too
adb.exe push .\open_gapps-arm64-9.0-micro-20190601.zip sdcard
in twrp flash lineage (not gapps) than, reboot to fastboot
fastboot.exe boot twrp...
flash gapps
done
or go here!
https://github.com/tkchn/daisyinstall/blob/master/README.md
anykill said:
fastboot.exe boot twrp...
adb.exe push lineage.... /sdcard
adb.exe push gapps.... /sdcard
in twrp flash lineage (not gapps) than, reboot to fastboot
fastboot.exe boot twrp...
flash gapps
done
Click to expand...
Click to collapse
Yeah, it was that easy..
If I try to boot twrp I get the error, that mdpt image is corrupted and it doesn't boot..
Bucika said:
Yeah, it was that easy..
If I try to boot twrp I get the error, that mdpt image is corrupted and it doesn't boot..
Click to expand...
Click to collapse
Oh... maybe you need to do the EDL...
I had to do this one time when I flashed wrong image...
anykill said:
Oh... maybe you need to do the EDL...
I had to do this one time when I flashed wrong image...
Click to expand...
Click to collapse
< waiting for device > is all I get when I boot into EDL..
Bucika said:
< waiting for device > is all I get when I boot into EDL..
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=HTRLumtgqOM
However I do believe that the phone is not totally bricked, as I can boot into EDL and into Fastboot, but there is no system, no recovery.. And when I try to flash anything all I get is mdpt image is corrupted.. And If I try to flash anything from EDL it just says < waiting for device >
No..
I can get into the EDL by typing fastboot oem edl.. and computer recognize the device as Qualcom HS-USB QDloader 9008... I just can't find a way to flash anything..
Bucika said:
Yeah, it was that easy..
If I try to boot twrp I get the error, that mdpt image is corrupted and it doesn't boot..
Click to expand...
Click to collapse
try this
New TWRP 3.3.1-0 update:
Bootable: https://androidfilehost.com/?fid=6006931924117887098
Flashable: https://androidfilehost.com/?fid=6006931924117887097
Same thing.. Corrupted mdtp..
Bucika said:
Same thing.. Corrupted mdtp..
Click to expand...
Click to collapse
you tried the Miflash?
https://www.xiaomiflash.com/
and the stock firmware
https://bigota.d.miui.com/V10.0.8.0.PDLMIXM/miui_DAISYGlobal_V10.0.8.0.PDLMIXM_29324cbe1b_9.0.zip
Bucika said:
Same thing.. Corrupted mdtp..
Click to expand...
Click to collapse
Try to flash version 9.6.4.0. using the QFIL utility (QPST). maybe she will help
Bucika said:
Hello,
I've unlocked the bootloader and installed twrp..
First thing that was strange was that after I've put the .zip file to the internal memory, and booted back to twrp, the files were not there.. after that I've rebooted the phone, it asked me for a password (I've had no password after I've unlocked the bootloader)...
I've puted the Linage OS and Gapps on the external sd card..
Went to recovery again tried to flash the linage OS, got some error, like step 1 step 2.. and then error, tried to reboot into system.. now it only boots into fastboot.. I can get it to the EDL.. However cant flash twrp.. I get the error - mdp image is corrupted..
So I'm stuck! Don't know what to do anymore..
Any help is much appreciated.
Click to expand...
Click to collapse
Bro just stay in fastboot and flash the official stock firmware. Extract it on your computer and run FLASH ALL.
https://en.miui.com/getrom-354.html?m=yes&mobile=2
Btw- make sure you have charge over 50%
I don't recommend to use mi flash tool in that situation.
Download the fastboot rom and adb to the same folder and run the flash_all.bat.
What it will do it delete the partitions and remake them what mi flash tool don't do, after that your phone will be back to stock.
I played with this phone a lot and I even got the system is now destroyed message and also deleted my imei, if I did recovered from that so I know what I'm saying?
MAKE SURE TO NOT RUN THE FLASH_ALL_LOCK.BAT IF YOU DO WITHOUT TESTING IF YOUR SYSTEM BOOT FINE YOU COULD BRICK YOUR PHONE FOREVER!!!​
OP did any of these methods work?
I had the exactly same problem when I first got to flashing on my A2 Lite. Download the newest Fastboot image, extract it with 7zip and run the flash_all.bat, <b>NOT THE FLASH_ALL_LOCK.BAT<b/>. This will recover everything. After that you can proceed normal installing. Also use unofficial TWRP by offain instead of the official one.
The exact installing instructions can be found here: https://github.com/tkchn/daisyinstall
Use only this installation guide, except for the disable encryption part: don't flash the disableencyption.zip directly after TWRP on Slot A, but instead install it after the GApps and leave out Magisk. This will automatically install Magisk 16.7 on your phone, but you can upgrade that after a successful boot. If you will try to flash the def.zip on the Slot A, it will give an error and your phone will encrypt the data on the first boot.
Noam5651 said:
I don't recommend to use mi flash tool in that situation.
Download the fastboot rom and adb to the same folder and run the flash_all.bat.
What it will do it delete the partitions and remake them what mi flash tool don't do, after that your phone will be back to stock.
I played with this phone a lot and I even got the system is now destroyed message and also deleted my imei, if I did recovered from that so I know what I'm saying
MAKE SURE TO NOT RUN THE FLASH_ALL_LOCK.BAT IF YOU DO WITHOUT TESTING IF YOUR SYSTEM BOOT FINE YOU COULD BRICK YOUR PHONE FOREVER!!!​
Click to expand...
Click to collapse
thanks a lot , it work for my Mi a2 Lite which previously had an error message "device unable to boot Error - mdtp image is corrupted"
now normal again
i found the souliton man do you still need help? i had exact same problem

Soft bricked, need help.

Hi guys, in short, I wanted to install the latest xiaomi.eu MIUI 12.5 beta on a Mi 10T Pro, european version.
What I did was: unlocked bootloader, flash latest TWRP 3.5 beta version, I think I booted the device normally after this...
Then went back to TWRP and flashed the Zip file right away, don't know what I wiped after the install.
All in all the device won't boot now, I'm stuck to either twrp or fastboot.
Problem is I cant flash a fastboot stock rom, says it's successful but the flashing process is like 2 seconds, i can't copy a recovery rom to the internal storage, i think Data partition got corrupted.
Can't wipe Data partition, there is a FBE decription error, and says unsupporter file system auto.
Does anyone have any idea what can I try.
Already tried to change Data file system to ext2 then back to ext4 but no luck.
PC recognizes the phone as a media device, I can see the Internal storage icon, but can't see any files nor can I copy anything to it.
Tried flashing the stock rom with mi flash tool and with command prompt too.
Any advice is welcome.
WSSRoach said:
Hi guys, in short, I wanted to install the latest xiaomi.eu MIUI 12.5 beta on a Mi 10T Pro, european version.
What I did was: unlocked bootloader, flash latest TWRP 3.5 beta version, I think I booted the device normally after this...
Then went back to TWRP and flashed the Zip file right away, don't know what I wiped after the install.
All in all the device won't boot now, I'm stuck to either twrp or fastboot.
Problem is I cant flash a fastboot stock rom, says it's successful but the flashing process is like 2 seconds, i can't copy a recovery rom to the internal storage, i think Data partition got corrupted.
Can't wipe Data partition, there is a FBE decription error, and says unsupporter file system auto.
Does anyone have any idea what can I try.
Already tried to change Data file system to ext2 then back to ext4 but no luck.
PC recognizes the phone as a media device, I can see the Internal storage icon, but can't see any files nor can I copy anything to it.
Tried flashing the stock rom with mi flash tool and with command prompt too.
Any advice is welcome.
Click to expand...
Click to collapse
LOG IN IN MI FLASH
jjgvv said:
LOG IN IN MI FLASH
Click to expand...
Click to collapse
What do you mean?
how do you flash stock rom 2 secs?
jjgvv said:
how do you flash stock rom 2 secs?
Click to expand...
Click to collapse
I think it doesn't fully flash, says it's successful but nothing really happens.
use what flash tool?
jjgvv said:
use what flash tool?
Click to expand...
Click to collapse
Tried latest from xiaomis website but that gives error, so i tried to download one from another website, says its latest version too
have you log in in that flash tool?
jjgvv said:
have you log in in that flash tool?
Click to expand...
Click to collapse
There is no way to log in, aren't you talking about the mi unlock tool?
mi flash?
jjgvv said:
mi flash?
Click to expand...
Click to collapse
Yes, there is no option to log in to mi flash tool
fastboot erase data then
jjgvv said:
fastboot erase data then
Click to expand...
Click to collapse
How do i do that?
WSSRoach said:
How do i do that?
Click to expand...
Click to collapse
go into fastboot and Type fastboot erase data in the fastboot cmd prompt
jjgvv said:
go into fastboot and Type fastboot erase data in the fastboot cmd prompt
Click to expand...
Click to collapse
Will try as soon as i get near a PC
jjgvv said:
go into fastboot and Type fastboot erase data in the fastboot cmd prompt
Click to expand...
Click to collapse
Sadly it fails
WSSRoach said:
Sadly it fails
Click to expand...
Click to collapse
how does it fail
jjgvv said:
how does it fail
Click to expand...
Click to collapse
I typed fastboot erase data, i get: FAILED (remote: Check device console)
Code:
fastboot -w
or
Code:
fastboot erase userdata
is the correct command. Now, if this fails, find lr-twrp, flash that, reboot, wipe data, and try again... And you have to do fastboot commands from fastboot, not from twrp...
calinorg said:
Code:
fastboot -w
or
Code:
fastboot erase userdata
is the correct command. Now, if this fails, find lr-twrp, flash that, reboot, wipe data, and try again... And you have to do fastboot commands from fastboot, not from twrp...
Click to expand...
Click to collapse
this looks like it worked, still now says unable to mount storage when trying to format data from twrp, but thats a step ahead...now it says in yellow )
I have an idea to flash lineage os recovery with fastboot, might that work?

Question Soft brick RMX3363GDPR

Hello,
I am sorry to bother you with this stupidity but i soft bricked (stuck in fastboot) my Realme GT Master Edition (RMX3363GDPR).
The phone is unlocked but i am unfamilear with flashing this phone and it's partition system.
Anyone can help me? I tried flashing with RealmeOppo flash tool but it or hangs or tells me it's succeeded but it's clearly not. It stays on fastboot mode.
Thanks in advance
pieterrees said:
Hello,
I am sorry to bother you with this stupidity but i soft bricked (stuck in fastboot) my Realme GT Master Edition (RMX3363GDPR).
The phone is unlocked but i am unfamilear with flashing this phone and it's partition system.
Anyone can help me? I tried flashing with RealmeOppo flash tool but it or hangs or tells me it's succeeded but it's clearly not. It stays on fastboot mode.
Thanks in advance
Click to expand...
Click to collapse
https://sourceforge.net/projects/nippongsi/files/Pixel%20-%20Pixel5-Tiramisu-Beta2.1%20-%20KAVHT4FFWN/Pixel5-Tiramisu-Beta2.1-AB-Tiramisu-20220527-NipponGSI.img.gz/download
extract the .gz to become a .img, with 7zip or whatever,then rename it to system.img, put to c drive not under any folder, then execute fastboot command:
fastboot flash system C:\system.img
if fail then replace with
fastboot flash system_a C:\system.img
and
fastboot flash system_b C:\system.img
then
fastboot -w
fastboot reboot
if you are really lucky it will boot up into system
do at your own risk
Thank for your reply. How is Pixel5 firmware compatible with Realme GT Master Edition?
NVM, fixed it already.
pieterrees said:
Thank for your reply. How is Pixel5 firmware compatible with Realme GT Master Edition?
Click to expand...
Click to collapse
ported (added compatibility) for generic android 9 or higher devices
pieterrees said:
NVM, fixed it already.
Click to expand...
Click to collapse
glad you fixed it
LR7875 said:
https://sourceforge.net/projects/nippongsi/files/Pixel%20-%20Pixel5-Tiramisu-Beta2.1%20-%20KAVHT4FFWN/Pixel5-Tiramisu-Beta2.1-AB-Tiramisu-20220527-NipponGSI.img.gz/download
extract the .gz to become a .img, with 7zip or whatever,then rename it to system.img, put to c drive not under any folder, then execute fastboot command:
fastboot flash system C:\system.img
if fail then replace with
fastboot flash system_a C:\system.img
and
fastboot flash system_b C:\system.img
then
fastboot -w
fastboot reboot
if you are really lucky it will boot up into system
do at your own risk
Click to expand...
Click to collapse
I did all that on the phone but the phone is on fastboot ????????? What is the solution please?
nighetspy said:
I did all that on the phone but the phone is on fastboot ????????? What is the solution please?
Click to expand...
Click to collapse
Fastboot does not properly recognize your device?
Try fastboot reboot fastboot before executing the commands
LR7875 said:
Fastboot does not properly recognize your device?
Try fastboot reboot fastboot before executing the commands
Click to expand...
Click to collapse
(remote: 'Partition not found') fastboot error please help me
nighetspy said:
(remote: 'Partition not found') fastboot error please help me
Click to expand...
Click to collapse
Tried system, system_a and system_b?
LR7875 said:
Tried system, system_a and system_b?
Click to expand...
Click to collapse
yes The problem is still there
nighetspy said:
yes The problem is still there
Click to expand...
Click to collapse
GSI on Super Partitions
I want so much to install GSI, but when I was going to flash I saw that my device "doesn't have System" Partition. It's called Super Partition there. Does anyone knows how can I install it? I tried some video tutorials, but it always get an Error...
forum.xda-developers.com
LR7875 said:
GSI on Super Partitions
I want so much to install GSI, but when I was going to flash I saw that my device "doesn't have System" Partition. It's called Super Partition there. Does anyone knows how can I install it? I tried some video tutorials, but it always get an Error...
forum.xda-developers.com
Click to expand...
Click to collapse
fastboot flash <PARTITION> <FILENAME>. ......... Nothing new
pieterrees said:
NVM, fixed it already.
Click to expand...
Click to collapse
Could you please tell me how you fixed it, dealing with the same issue
battus said:
Could you please tell me how you fixed it, dealing with the same issue
Click to expand...
Click to collapse
I also want to know how this problem was solved
Allright,
I had a GDPR version of the firmware. I soft bricked my phone by accident. Then I flashed
Code:
RMX3363export_11_A.04_2021080317040000.ofp
and then it was an export version.
I found other ofp's but they didn't work (alltough for me..)
After i successfully flashed my phone i had update issues so i flashed
Code:
RMX3363export_11_A.09_2021122118530211.ofp
This works and a couple of hours later i even get the Realme UI 3.0 update. (this was my goal before i bricked my phone )
I used this tool:
Code:
OppoRealme-OFP-Flash
Beware, if you flashed your phone and it does not work, try changing your Slot in Fastboot.
If you don't have the correct slot (or the new software is flashed onanother slot, it will keep rebooting to fastboot)
I hope my explanation helps. I was desperate and spent three days fixing my phone. When i succeeded i tried to flash the same file from my laptop. This didn't work.I don't know why.
Good luck
pieterrees said:
Allright,
I had a GDPR version of the firmware. I soft bricked my phone by accident. Then I flashed
Code:
RMX3363export_11_A.04_2021080317040000.ofp
and then it was an export version.
I found other ofp's but they didn't work (alltough for me..)
After i successfully flashed my phone i had update issues so i flashed
Code:
RMX3363export_11_A.09_2021122118530211.ofp
This works and a couple of hours later i even get the Realme UI 3.0 update. (this was my goal before i bricked my phone )
I used this tool:
Code:
OppoRealme-OFP-Flash
Beware, if you flashed your phone and it does not work, try changing your Slot in Fastboot.
If you don't have the correct slot (or the new software is flashed onanother slot, it will keep rebooting to fastboot)
I hope my explanation helps. I was desperate and spent three days fixing my phone. When i succeeded i tried to flash the same file from my laptop. This didn't work.I don't know why.
Good luck
Click to expand...
Click to collapse
How long does it take to flash after this? fastboot --set-active=a ؟؟؟؟؟؟؟؟؟؟؟
I just flashed the ofp, after that i tried to reboot.
Then it didn't work and the device booted back into fastboot. After that I did
Code:
fastboot --set-active=other
and after that
Code:
fastboot reboot
and then it worked.
Maybe a vague tip: when you flashed it correctly and you are on the wrong slot it takes longer to boot into fastboot then when your device is bricked. Then you can change slots and (for me) that did the trick.
Good luck
How long does it take for this to end?
fastboot --set-active=other ؟؟
؟؟
a couple of seconds. When it takes forever try rebooting fastboot and try changing slots again or flash again (on another computer).
pieterrees said:
a couple of seconds. When it takes forever try rebooting fastboot and try changing slots again or flash again (on another computer).
Click to expand...
Click to collapse
What region is your phone used ؟
It works fine with you? RMX3363_11_A.09_2021122118530211.ofp ؟؟

Categories

Resources