[DISCONTINUED][XT16xx][ROM][6.0.1][UNOFFICIAL] CyanogenMod 13 [MotoG4 / G4 Plus] - Moto G4 Plus ROMs, Kernels, Recoveries, & Other De

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Information for Reliance Jio Users on how to activate VoLTE. Follow instructions to the T. Thank you ==vj== for the instructions.
Make sure you are on the latest baseband M8952_70009.08.03.48R.
Jio SIM should be in slot1.
Complete the setup wizard normally after flashing ROM & GAPPS ( flash arm-6-pico if using opengapps ).
On CM and Vanir, APN is set to jionet by default. If its not, goto Settings->SIM Cards->SIM1 Settings->Access Point Names and change as follows. Name=jionet, APN=jionet, APN Type=default, APN Protocol=IPv4/IPv6. Click here for screenshots.
Goto "SIM CARD" settings and select calling sim as JIO. This can also be done during setup.
Select sim1 settings (JIO) & toggle enhanced LTE option enabled. This is required to activate the volte option in dialer. If enhanced VoLTE option doesn't show up, goto APN settings and select Bearer as LTE alone. Then manually select Jio4g from mobile networks. That should enable enhanced LTE option for sure.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
How is this different from this thread?
Well it isn't, apart from the fact that I get to update the OP with latest details of my builds. This was also requested by many users as the old thread hasn't been updated in a while and I have received many pm's regarding this. If this is against the rules, mods are free to close the thread at any time.
Requirements
TWRP 3.0.20 build: Recovery TWRP 3.0.2.0 for Moto G4
How to install
From stock / other custom roms
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Flash Install Gapps (OpenGapps ARM MM Mini or smaller is recommended)
Reboot
Upgrade from previous build ( via OTA )
Download the update using the OTA app
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM
Flash Install Gapps (OpenGapps ARM MM Mini or smaller is recommanded)
Reboot
Downloads
ROM : https://drive.google.com/drive/folders/0B1ZbHDX3hq1yRHNmS1UxdGJxREU?usp=sharing
GAPPS : OpenGapps
RECOVERY : https://dl.twrp.me/athene/
Updates
Updates are provided via OTA. You will be notified when there is an update.
Issues
Chopchop is buggy
Credits
Team CyanogenMod
ashwin007
vache
Shreps
khaoticking
elandroido
yeshwanthvshenoy
Kernel Sources
https://github.com/boulzordev/android_kernel_motorola_msm8952
XDA:DevDB Information
CyanogenMod 13.0, ROM for the Motorola G4 and G4 plus
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: A custom recovery (TWRP preferrable),ROM and Gapps zip file,knowledge on how to flash zip files.
Version Information
Status: Stable
Created 2016-08-14
Last Updated 2016-10-12

Download link??
Edit: xda app is not showing it!! Have to open in browser!!

jyoti.id said:
Download link??
Edit: xda app is not showing it!! Have to open in browser!!
Click to expand...
Click to collapse
I think that's normal, because the link is referring to a non XDA website (Google Drive).
Send with my Moto G4 Plus (XT1642) on Vanir ROM using Tapatalk!

smitharro said:
I think that's normal, because the link is referring to a non XDA website (Google Drive).
Send with my Moto G4 Plus (XT1642) on Vanir ROM using Tapatalk!
Click to expand...
Click to collapse
Ok.. didnt know that.. but then why the old CM13 thread is showing!! Ss below!!

Thanks 2 U @Silesh.Nair For Doing This. And I Don't Think Any Mod Will Do That.

Krsambhav16 said:
Thanks 2 U @Silesh.Nair For Doing This. And I Don't Think Any Mod Will Do That.
Click to expand...
Click to collapse
No, better close the other threat. It seems that @ashwin007 left here...
Send with my Moto G4 Plus (XT1642) on Vanir ROM using Tapatalk!

You forgot (or maybe deliberately left out) the version of Cyanogenmod.

jyoti.id said:
Download link??
Edit: xda app is not showing it!! Have to open in browser!!
Click to expand...
Click to collapse
Sent from my Moto G4 Plus using Tapatalk

It wasn't showing then when i posted the comment! Anyway!! Thanx!

Well a for 1 will be at this thread thanks dev for opening new thread

I'm planning to buy this phone.
Exactly what is not working?
Also, what's the kernel version?

Daedroza said:
I'm planning to buy this phone.
Exactly what is not working?
Also, what's the kernel version?
Click to expand...
Click to collapse
If U Are Thinking About This Phone, Then No Planning Is Needed. I Think Its Best In Its Class, Brand, Software, Hardware, Camera, And A Lot Many Things.
Now, On Stock As U Know Everything Is Working
On CM Based Or AOSP, Everything Is Working, Yes The Chop Chop Is Somewhat Called Buggy And The Camera In WhatsApp Or Other Third Party Apps Seems To Be Not Synced With Flash Correctly But It Was A Bug Few Weeks Ago, I Think It Has Been Solved Until Now.
VoLTE Was A Major Problem Few Days Ago But As We Know The Devs And Users Were Restless, So This Was Also Solved.
Battery Life With Features On RR Is Best As Per My Experience And Quark Kernel Is Also The Best CM Kernel As U Can't Use Wi-Fi On Elemental X When Flashed On CM Based ROMs.
Most Featured ROM - RR (Credits To @Shreps)
Most Stable ROM - Beanstalk (As Per User Reviews) (C.T. @rahulsnair)
Most Battery Life ROM - CrDroid > CM > RR
Most Clean ROM - CM (By @Silesh.Nair)
Thanks If U Understood And Sorry If U Didn't.

Thanks for the update @Silesh.Nair! I'll be switching back to CyanogenMod again (though Vanir wasn't bad also!)
Send with my Moto G4 Plus (XT1642) on Vanir ROM using Tapatalk!

smitharro said:
Thanks for the update @Silesh.Nair! I'll be switching back to CyanogenMod again (though Vanir wasn't bad also!)
Send with my Moto G4 Plus (XT1642) on Vanir ROM using Tapatalk!
Click to expand...
Click to collapse
Do you know about chagelogs in this build? Thanks

Krsambhav16 said:
On CM Based Or AOSP, Everything Is Working, Yes The Chop Chop Is Somewhat Called Buggy And The Camera In WhatsApp Or Other Third Party Apps Seems To Be Not Synced With Flash Correctly But It Was A Bug Few Weeks Ago, I Think It Has Been Solved Until Now.
Quark Kernel Is Also The Best CM Kernel As U Can't Use Wi-Fi On Elemental X When Flashed On CM Based ROMs
Thanks If U Understood And Sorry If U Didn't.
Click to expand...
Click to collapse
If I buy this, I will sure look why WiFi is not working on Elemental X.
I'm buying this because of it has 3.10.xxx kernel which is supported till October 2017.
I have read the other thread and I have got this -
* Audio playback
* SELinux
* Laser Auto Focus(LAF)
So, the above things still don't work? I certainly need SELinux status 'Enforcing'.
And what's Chop Chop?
Thanks.

Daedroza said:
If I buy this, I will sure look why WiFi is not working on Elemental X.
I'm buying this because of it has 3.10.xxx kernel which is supported till October 2017.
I have read the other thread and I have got this -
* Audio playback
* SELinux
* Laser Auto Focus(LAF)
So, the above things still don't work? I certainly need SELinux status 'Enforcing'.
And what's Chop Chop?
Thanks.
Click to expand...
Click to collapse
Why are you comparing the contents of the old thread to this thread. Current issues with this ROM are very specifically mentioned in the OP.
Chopchop is a moto action wherein you activate the torch with a chopchop gesture.
Sent from my Moto G4 Plus using Tapatalk

Please status bar and home button aren't working un 17/10 build. Any idea?

Alejo2108 said:
Please status bar and home button aren't working un 17/10 build. Any idea?
Click to expand...
Click to collapse
Try reflashing the rom. What gapps are you using?

khaoticking said:
Try reflashing the rom. What gapps are you using?
Click to expand...
Click to collapse
Ok I will try again. I use mini slim gapps

Silesh.Nair said:
Why are you comparing the contents of the old thread to this thread. Current issues with this ROM are very specifically mentioned in the OP.
Chopchop is a moto action wherein you activate the torch with a chopchop gesture.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
There is no what's working section in the OP. One last thing to confirm, SELinux status and LAF(buggy or working or broken)?
Also, in OP you said the ROM uses 3.4.xxx kernel but in configuration file it's 3.10.xxx
Check here - https://github.com/boulzordev/andro...d873a/arch/arm/configs/cm_athene_defconfig#L3

Related

[ROM][4.4.4] CyanogenMod 11.0 for A3000-H [23/10/2015]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PREAMBLE
Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
To be able to even flash it, you'll need to use my CWM Recovery.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
Code:
getprop ro.product.board
.
Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
NOT WORKING
Camera
WORKING
GPS
WiFi
Audio
Boots
SELinux
Sensors
Vibration
Bluetooth
HWComposer
Offmode charging
sw video en/decoding (not hw)
Internal and external sdcards
RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)
NOTE
Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.
Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports​
DOWNLOAD
Instructions:
ordinarystar said:
Pre-equisites to flash:
1. Correct Firmware
1.1 First verify your build version by installing Terminal Emulator from Play Store and then type the following:
getprop ro.product.board
if the output is a3000_prc_3gfull, proceed to number 2.
1.2 if the output is not a3000_prc_3gfull, you will have to first flash another firmware which can be downloaded at:
https://drive.google.com/file/d/0B5yhZ9sXUH_GMWhCQllhbkZRbUk/edit
Firmware flashing instructions can be referred here:
http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135
2. My version of CWM installed
2.1 Now you should install the CWM. You need a rooted device to proceed. Assuming you followed 1.1 and 1.2, your device is already rooted.
You will need:
2.1.1 Install mobileuncle MTK Tools from PlayStore or download apk from thread below: http://forum.xda-developers.com/showthread.php?t=2697236
2.1.2 My CWM, download the zip file and extract the recovery.img. Put the recovery.img in your microSD card.
http://olivier.hubdroid.com/a3/cwm/cwm_a3-20141220.zip
2.2 Open up mobileuncle MTK Tools, and select install recovery. It will detect the recovery.img in your microSD card (top in the list).
Tap on it to install. DO NOT tap on others in the list. Just click OK to install. If you have already downloaded my rom with it placed in your microSD card,
you may proceed to boot into recovery, or you can press cancel and shut down your device.
The pre-equisites is now completed!
Steps to flash:
1. Download my rom from http://olivier.hubdroid.com/a3/cm-11.0/ - select a preferred release. latest release recommended.
2. Download gapps from http://forum.xda-developers.com/android/software/gapps-consolidated-gapps-thread-t3064693 - select gapps for kit kat 4.4.4
2. Boot up recovery: hold power button and volume up button, as it booted up release power button. Use volume up button to browse to "recovery mode" and press volume down to proceed recovery mode.
3. Do the following:
2.1 Factory reset
2.2 Clear cache
2.3 Clear dalvik cache (Advanced > clear dalvik cache)
2.4 install from zip, select the rom and install
2.5 install gapps.
2.6 when done, reboot to system
The installation is now completed!
Click to expand...
Click to collapse
I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated.
My builds can be found here.​
SOURCEs
Device tree (branch cm-11.0)
Kernel (branch cm-11.0)
OmniROM Gerrit (topic mt6589)​
CREDITs
chrmhoffmann
kashifmin
Grarak
xplodwild
Dr-Shadow
superdragonpt
EnerJon
kupyxa4444
XDA:DevDB Information
CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000
Contributors
Olivier
Source Code: https://github.com/lenovo-a3-dev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-11-26
Last Updated 2015-10-23
Changelog
BUILD STATUS
Willing to contribute? Just drop me a PM, send me pull requests on GitHub or join my IRC channel on freenode: #cm-a3!
Please don't clutter the thread, post your bug reports here instead. Thanks!
CHANGELOG
Code:
[B][U]29/07/2015:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Fixed automatic rotation
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Removed scsi_wait_scan module
[*][/list]
[B][U]02/02/2015:[/U][/B]
[list][*]Fixed sw encoding and decoding ([B][COLOR="Lime"]YouTube videos etc work now![/COLOR][/B])
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Reverted to LZMA compression (for TWRP)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Misc patches for ext4, crypto
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added support for kernel mode NEON
[*][/list]
[B][U]28/12/2014:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Switched to LZ4 compression (instead of LZMA)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added overall stats for all available cores
[*]Fixed battery capacity (item in framework-res)
[*][/list]
[B][U]26/12/2014:[/U][/B]
[list][*]Switched back to deodexed build on community request
[*]Removed recovery-from-boot.p (we don't really want this)[/list]
[B][U]20/12/2014:[/U][/B]
[list][*]Fixed Internal sdcard[/list]
[B][U]17/12/2014:[/U][/B]
[list][*]Fixed HWComposer
[*]Odexed build for better performance[/list]
[B][U]16/12/2014:[/U][/B]
[list][*]Fixed NVRAM
[*]Fixed Bluetooth
[*]Fixed RIL[/list]
[B][U]26/11/2014:[/U][/B]
[list][*]Initial public release.[/list]
Successfully flashed over A3000_A422_013_25_140624.
Felt like holding a nexus 7!
Thanks a lot man!
Thanks
Thanks Olivier for your enormous efforts, you are working alone , You rock
successfully installed it over A3000_A422_013_025_140926_WW_CALL_FUSE
Using this build "cm-11-20141127-UNOFFICIAL-a3"
I'm testing it , and i'm going to report the bugs i find via the bug report
Again , thanks
This is the best post on XDA so far.
Thank you for your effort @Olivier
Think you Sir...is it support Call function ?
i will try it soon...
Hesham Sleem said:
Think you Sir...is it support Call function ?
i will try it soon...
Click to expand...
Click to collapse
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***
nut27455 said:
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***
Click to expand...
Click to collapse
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??
Hesham Sleem said:
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??
Click to expand...
Click to collapse
No. Guys, it's clearly stated in the OP that RIL/radio (and hence calls/SMS) is broken!
New user
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??
Magiiic said:
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??
Click to expand...
Click to collapse
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)
MirXas said:
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)
Click to expand...
Click to collapse
Any solve to this problem's?
Magiiic said:
Any solve to this problem's?
Click to expand...
Click to collapse
Wait for future builds.
Stop asking questions in this thread, there is a seperate Q&A thread especially for this.
Really great work
Only the camera to go and I'll use this I promise
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Sent from my Lenovo A3000-H
MOD EDIT: Not a great sense posting some other ROM LINK here
afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
STOP spaming the same everywhere ! The RIL bug is not in the kernel, it's in the ROM itself.
Click to expand...
Click to collapse
Members,
It is not so difficult to be sensible and considerate.
1) Kindly stop asking questions here. Use the Q&A.
2) If you find something not to your liking, find something which you like or produce what you like by yourself
THREAD CLEANED.
OP thankyou for this works very well with my F version ,never seen HD video load so fast
afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Click to expand...
Click to collapse
Yes, the CM11 kernel is based off my HodorKernel. Apparently the kernel isn't the problem here - you could flash it on any fused Stock ROM and everything would work.
To those who wanted ETAs: At the moment, I'm a bit busy with exams and other devices. Bugfixing is progressing rather slowly, not only due to time constraints but also because I'm working on this alone and it's not easy to work on mtk devices.
keep up the good work.
you can make it buddy.

[ROM][6.0.1][UNOFFICIAL] Temasek's Unofficial CM13! [UBER]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
temasek's UNOFFICIAL CM-13.0 BUILDS
UNOFFICIAL ROM THREAD
This is the unofficial thread for all current and future unofficial builds of CM-13.0 created by @temasek.
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Foreword
CM13.0 require the latest bootloader.
This ROM supports each of Single Sim as well as Dual sim devices.
STOP!
If you do not read EACH and EVERY "OP" POST made by me and post rudely, report bugs incorrectly, or ask for ETAs/feature requests, you WILL be called out for it.
You have been warned. Most, if not, any information you may be looking for can be found either in this thread or by performing a simple search using good key words. Think before you post. Thank you.
FEATURES
MANY. Few of them are listed-
*Status bar, notification drawer, recents, app circle bar, omniswitch, etc..
Features added by me-
*Wake gestures (Hand wave, pocket)
*Uber 4.9 for kernel and rom.
LATEST ROM BUILD
ROM Folder (new)
ROM Download Folder(Old)
(Sweet tip for all-
If it says page not found when you use Tapatalk, just remove the "25" between the Temasek% and 20 in the link )
FAQ and Trouble Shooting
The lastest version TWRP (3.0.0.0) is recommended
Clean Installation
1. Download the appropriate ROM using links provide in the second post.
2. Download the appropriate GApps following the links in the second post.
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
7.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. Reboot Device.
Dirty Flash/Update
1. Download the appropriate ROM using links provide in the second post.
2. WIPE CACHE/DALVIK.
3. Install the zip file from recovery.
3.1. DO NOT FIX PERMISSIONS AFTER FLASHING, doing so will cause a bootloop.
4. WIPE DALVIK/CACHE (for good measure).
5. Reboot Device.
@temasek for working so hard on this ROM
WORKING AND NOT WORKING-
Same as official CM13
Please do not ask for builds. I'll do them whenever I have time.
HIT THANKS!!
XDA:DevDB Information
Temasek's Unofficial CM13, ROM for the Moto G 2014
Contributors
Vidhanth
Source Code: https://github.com/temasek/android
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Beta
Created 2015-12-06
Last Updated 2016-05-15
Reserved
Mine
Reserved
Another one!
Nice FAQ! And thx for the rom <3
Crazy FAQ!! Solved all my problems xD xD. Add the features column to the OP if there is any thing of importance.
sagar846 said:
Crazy FAQ!! Solved all my problems xD xD. Add the features column to the OP if there is any thing of importance.
Click to expand...
Click to collapse
Lol. Most of the features can be seen in the screenshot
Sent from my Moto G 2014 using Tapatalk
Amazing rom so far, as the 12.1 one was before. Just something to ask: is the feature set the same as the 12.1 temasek set? If so, there are almost all the features included beside the advanced sound settings (such as less frequent notification sound) or the screen settings... Keep it up man, great rom
Curuf1n said:
Amazing rom so far, as the 12.1 one was before. Just something to ask: is the feature set the same as the 12.1 temasek set? If so, there are almost all the features included beside the advanced sound settings (such as less frequent notification sound) or the screen settings... Keep it up man, great rom
Click to expand...
Click to collapse
Almost all features of temasek cm12.1 present. Only a few like trds, floating windows, etc are missing
Sent from my Moto G 2014 using Tapatalk
A good rom for me so far and looking forward to more features. I just got a little question. I mounted my sdcard as external storage, but it seems due to marshmallow its just mounted as "read-only" Does someone of you here know a way how to mount the storage as read and write?
Sweet tip for all-
If it says page not found when you use Tapatalk, just remove the "25" between the Temasek% and 20 in the link
Sent from my Moto G 2014 using Tapatalk
Sorry for not posting any updates.. The problem is that someone broke the Temasek source code, and compiling gives an error. On top of that, I also have exams. So next update will be coming this weekend, if the source gets fixed.
And also, the OP has been completely revamped
Vidhanth said:
Sorry for not posting any updates.. The problem is that someone broke the Temasek source code, and compiling gives an error. On top of that, I also have exams. So next update will be coming this weekend, if the source gets fixed.
And also, the OP has been completely revamped
Click to expand...
Click to collapse
Hi Vidhanth, how did you find that the source code is broken? I am trying to decipher if cm-12.1 is also broken and when it will be fixed if that is the case.
Rijul.A said:
Hi Vidhanth, how did you find that the source code is broken? I am trying to decipher if cm-12.1 is also broken and when it will be fixed if that is the case.
Click to expand...
Click to collapse
Well, I was getting an error while compiling, related to a ring.c file (or some .c file like that) I tried a resync and recompile, but that didn't fix it. So it was obvious that its the source that's broken. But still, I asked a few devs in this community, and that's what all of them said. I also PM'ed temasek himself regarding this, and he said he's on an overseas holiday, and he knows that the source has been broken by someone. So he'll fix it when he returns
Sent from my Moto G 2014 using Tapatalk
The page says unaspected error! By browser and PC browser, the link isn t with the "25", sorry for my english, i m italian, you are not my real mom
Palkian said:
The page says unaspected error! By browser and PC browser, the link isn t with the "25", sorry for my english, i m italian, you are not my real mom
Click to expand...
Click to collapse
https://basketbuild.com/devs/Vidhanth/titan/roms/Temasek Unofficial
Copy and paste this link in your browser.
Sent from my Moto G 2014 using Tapatalk
@ Vidhant - please remove the default Cm updater, it downloads Cm official build and flashes over Temasek
Mayb no-one noticed.
Madaditya said:
@vidhant - please remove the default Cm updater, it downloads Cm official build and flashes over Temasek
Mayb no-one noticed.
Click to expand...
Click to collapse
@Vidhanth
*
Madaditya said:
@vidhant - please remove the default Cm updater, it downloads Cm official build and flashes over Temasek
Mayb no-one noticed.
Click to expand...
Click to collapse
Ok I'll do that when the source is fixed
Sent from my Moto G 2014 using Tapatalk
Looks like temasek is fixing or has fixed the source. I'll do a build today, when I get back from school
Guys I'm sorry that I didnt do a build. I made a really silly mistake. A typo. While syncing, it was giving me some errors. So I wanted to run this-
rm -rf .repo/repo
(delete the repo directory inside .repo)
but I ran this by mistake-
rm -rf .repo
Well, that deleted the whole .repo folder, which was around 10 GB. Now its syncing again, at 2kbps lol. (Stupid FUP's)
Sorry again guys.

[ROM][6.0.1][UNOFFICIAL] Dirty Unicorns 10.1 [16/04/2016]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or the current economic crisis caused by you following these
* directions. YOU are choosing to make these modificiations, and
* if you point your finger at me for messing up your device, I will
* laugh at you.
*
About Us:
Dirty Unicorns is a project that started out with no name. It was a project that was first created based off AOKP back in the early days of Jelly Bean because of curiosity. In the early days, it was just a one man show on one device (EVO 3D). However, many others have joined the project since and it has grown a lot. We have seen a wide variety of talent contribute to this project of ours and many of our contributors have gone on to help other projects, and that is ultimately why we do what we do.
Once Jelly Bean was over, we decided in Kitkat to move to a new base, which was OmniROM. While AOKP was fun, OmniROM proved to be even more exciting because it challenged us to see what we could with something different.
With Lollipop and Marshmallow, we have moved to an AOSP base with a lot of patches from CAF to make our older devices function as they should. With that said, it has been an awesome learning experience and it's still not over! We are still learning every day and continue to move forward.
Few more things we will say is that we don't accept nor ask for donations. We don't believe in that. Everything that is necessary to keep this project going is out of our own pocket. Gerrit, Jenkins, Websites, Devices, etc.....
All we do ask is that you search, read and try to enjoy the process with us!!
Flashing Instructions:
- Verify that you're using the latest version of TWRP
- Perform a FULL WIPE as described below if coming from another ROM
(A full wipe is when you wipe system/data/cache/internal and/or sdcard)
- Flash the latest version of this ROM
- Flash marshmallow GAPPS
( Recommended BaNkS Dynamic GApp or Open GApp pico )
- Reboot and ENJOY!!
Download Links:
ROM: https://www.androidfilehost.com/?fid=24499762636000929
GAPPS: http://download.dirtyunicorns.com/files/gapps/banks_gapps
Other Links:
ROM Source - https://github.com/DirtyUnicorns
Gerrit - http://gerrit.dirtyunicorns.com/#/q/statuspen
Credits and Thanks:
JMZ Software
Baby Jesus
Code Aurora Forum
Omni ROM
Android Open Kang Project (AOKP)
Android Ice Cold Project (AICP)
XDA-Developers
SlimROMs
Preludedrew
Max Weninger
Team Black Out
CyanogenMod[/CODE]
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta ( Unofficial )
Created: 2016-01-13
Last Updated: 2016-04-16
[ F.A.Q]
Q: It wont boot ( getting black screen ), why?
A: If you have 9505 it will boot, black screen is ROM boot animation issue...its booting but not showing an animation.
Q: Can't get recent?
A: Use double tap ( remember its a AOSP/GEP based ROM ).
Q: I am having Camera ( or any other app ) issue, why?
A: Set Selinux mode to permissive in [ Settings - Dirty Tweaks - ( under GENERAL UI ) Misc. Tweaks - Selinux Mode ]
[ F.A.Q - OLD 6. 0 BUILD]
Q: It wont boot, why?
A: If you have 9505 it will boot, but first boot it take time ( especialy if u use gapps ), so be patient till it boot.
Q: How to fix home key ( app switch )?
A: Use GravityBox.
Q: Why is nav. bar settings empty.
A: Close source, but you can enable nav. bar via GravityBox.
Reserved #2
Nice, a new MM rom !!
Is it multilanguage ?
What are know bugs ?
Can we themed it ?
Thank you vm.
Nicolas
I have 2 problems with this rom. First I can't install supersu after flashing it it doesn't show up there is no supersu app or even in the settings. Second there is no button to go to recent apps double tap home button doesn't work. Other than that the rom is great so far and I was surprised that cm themes was implemented even though this rom is based on aosp
Envoyé de mon GT-I9505 en utilisant Tapatalk
No nav-bar :/ @Diazz72 Question: Why is there no fling or normal navbar? Because this is from their caf-branch or because its Dirty-Deets?
@Diazz72: "I managed to install su by installing g SuperSU 2.46. Than only installing 2.66 apk and updating binary in app"
Sent from my GT-I9505 using Tapatalk
Soroxi said:
I have 2 problems with this rom. First I can't install supersu after flashing it it doesn't show up there is no supersu app or even in the settings. Second there is no button to go to recent apps double tap home button doesn't work. Other than that the rom is great so far and I was surprised that cm themes was implemented even though this rom is based on aosp
Envoyé de mon GT-I9505 en utilisant Tapatalk
Click to expand...
Click to collapse
yilun said:
@Diazz72: "I managed to install su by installing g SuperSU 2.46. Than only installing 2.66 apk and updating binary in app"
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
As @yilun sad, you need to install SuperSU 2.46, and than manually install 2.66 APK ONLY, and than upgrade binary from APP.
atego said:
Nice, a new MM rom !!
Is it multilanguage ?
What are know bugs ?
Can we themed it ?
Thank you vm.
Nicolas
Click to expand...
Click to collapse
1. Yes
2. Recent APP ( home ) buttun is not working, you need to change system/usr/keylayout/generic.k or install xposed, no nav.bar ( not yet implemented in rom ) ( but maybe you can activate it via xposed ( gravity box ).
3. Yes, its use CMTheme engine.
MartelKombat said:
No nav-bar :/ @Diazz72 Question: Why is there no fling or normal navbar? Because this is from their caf-branch or because its Dirty-Deets?
Click to expand...
Click to collapse
idk...its rom related.
MartelKombat said:
No nav-bar :/ @Diazz72 Question: Why is there no fling or normal navbar? Because this is from their caf-branch or because its Dirty-Deets?
Click to expand...
Click to collapse
Close source buddy, this is an unofficial build.
Sent from my Nexus 5X using Tapatalk
That's sad, but I understand.
I was so curious about Fling and the new navbar from Randal :/.
Then let's wait for offical build
Hi excellent hard work i hace one question i can install this rom in a variant s4 sgh-m919v or not because i want to use this excellent work please some help me with this thanks for your time
FAQ added to #2
Soroxi said:
I have 2 problems with this rom. First I can't install supersu after flashing it it doesn't show up there is no supersu app or even in the settings. Second there is no button to go to recent apps double tap home button doesn't work. Other than that the rom is great so far and I was surprised that cm themes was implemented even though this rom is based on aosp
Envoyé de mon GT-I9505 en utilisant Tapatalk
Click to expand...
Click to collapse
I flashed this su.zip
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
and it's there in the settings right over developer options, but it doesn't work properly .
no recent , i'm using omni right now.
shark jungle said:
I flashed this su.zip
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
and it's there in the settings right over developer options, but it doesn't work properly .
no recent , i'm using omni right now.
Click to expand...
Click to collapse
After your flash that zip, install THIS apk, and it will work...its working to me and my friend.
Diazz72 said:
After your flash that zip, install THIS apk, and it will work...its working to me and my friend.
Click to expand...
Click to collapse
Thanks buddy the binary update success, its working now.
shark jungle said:
Thanks buddy the binary update success, its working now.
Click to expand...
Click to collapse
Glad to here it ...enjoy.
Diazz72 said:
Glad to here it ...enjoy.
Click to expand...
Click to collapse
I have the honor to be here bro.
I really enjoyed the Dirty tweaks it's well organized,easy and fast to reach and configure i hope to have more options in the near future.
While using some Apps like WhatsApp i got systemUI fc sometimes not very annoying.
Lock screen fonts changes randomly after SystemUI crashes, it back to normal after rebooting.
as soon as this is the first DU Marshmallow build, its a good start.
Is having some issues with my Bluetooth speaker and google now. I have it working on JDC aosp MM, so I will play around with the settings. The problem is that it connects to the speaker BUT when it should be outputting a voice asking to say "say call and a name or number.." all you hear is static. The text to speech is setup correctly as you can test it with the phone only but the audio is messed up going to the bluetooth speaker.
I do like all the extras this ROM has compared to others. Also I am not getting LTE on this ROM..
@Diazz72
ROM Review
shark jungle said:
@Diazz72
ROM Review
Click to expand...
Click to collapse
Tnx m8, greate as always

[DISCONTINUED][XT16xx][ROM][6.0.1][UNOFFICIAL] Vanir AOSP [MotoG4 / G4 Plus]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Moto G4 and G4 plus are now officially supported by vanir. This thread is of no use now.
Information for Reliance Jio Users on how to activate VoLTE. Follow instructions to the T. Thank you ==vj== for the instructions.
Make sure you are on the latest baseband M8952_70009.08.03.48R.
Jio SIM should be in slot1.
Complete the setup wizard normally after flashing ROM & GAPPS ( flash arm-6-pico if using opengapps ).
On CM and Vanir, APN is set to jionet by default. If its not, goto Settings->SIM Cards->SIM1 Settings->Access Point Names and change as follows. Name=jionet, APN=jionet, APN Type=default, APN Protocol=IPv4/IPv6. Click here for screenshots.
Goto "SIM CARD" settings and select calling sim as JIO. This can also be done during setup.
Select sim1 settings (JIO) & toggle enhanced LTE option enabled. This is required to activate the volte option in dialer. If enhanced VoLTE option doesn't show up, goto APN settings and select Bearer as LTE alone. Then manually select Jio4g from mobile networks. That should enable enhanced LTE option for sure.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Vanir follows AOSP Upstream and mainly focuses on performance Tuning Android.
Be a part of the Vanir community!
https://plus.google.com/communities/111378032131473754160
Features
Customizable Navbar
Customizable Statusbar
Customizable Power Menu
Customizable Quick Settings Panel
Customizable LCD Density
Heads Up (floating) Notifications
Long Press Quick Settings Header Shortcuts (Long Press Locations: Date, Time, Weather, & Battery)
Expanded Desktop Option with Per App Settings
Terminal App - Needs to be enable in Developer Settings
ScreenShot - Power + Volume Down
Advanced Reboot - Enable in Developer Settings
QuickBoot - Enable in Developer Settings
System Profiles - Turn WiFi, GPS, & other features on or off when you enter or leave trigger wifi signal
Hardware Menu with Kernel Processor & I/O scheduler settings
CM Themes in Settings
Unofficial OTA support
Requirements
TWRP 3.0.20 build: Recovery TWRP 3.0.2.0 for Moto G4
How to install
From stock / other custom roms
Copy the ROM zip on your phone
Reboot in TWRP Recovery mode
Backup your phone!
Format/Wipe system, cache, dalvik, data
Flash/Install ROM
Flash Install Gapps (OpenGapps ARM MM Mini or smaller is recommended)
Reboot
Upgrade from previous build ( via OTA )
Download the update using the OTA app
Reboot in TWRP Recovery mode
Format/Wipe only cache, dalvik
Flash/Install ROM
Flash Install Gapps (OpenGapps ARM MM Mini or smaller is recommanded)
Reboot
Downloads
ROM : https://drive.google.com/drive/folders/0B1ZbHDX3hq1yU3hhV3pSQlZ1VmM?usp=sharing
GAPPS : OpenGapps
RECOVERY : https://dl.twrp.me/athene/
Updates
Updates are provided via OTA. You will be notified when there is an update.
Issues
Chopchop is buggy
Credits
Team Vanir
DHO
Shreps, vache, ashwin007, elandroido, khaoticking, yeshwanthvshenoy
Sources
https://github.com/boulzordev/android_kernel_motorola_msm8952
XDA:DevDB Information
Vanir AOSP, ROM for the Motorola G4 and G4 plus
Contributors
Silesh.Nair
Source Code: https://github.com/VanirAOSP
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
ROM Firmware Required: A custom recovery (TWRP preferrable),ROM and Gapps zip file,knowledge on how to flash zip files.
Based On: AOSP
Version Information
Status: Stable
Created 2016-10-13
Last Updated 2016-10-19
Running great on my xt1625
With this ROM is necesary make any for Volte work?
Same procedure as on cm.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
Same procedure as on cm.
Click to expand...
Click to collapse
Does volte works perfectly in this rom?
It does atleast for me.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
It does atleast for me.
Click to expand...
Click to collapse
Does it supports jio sim data + volte fine?
---------- Post added at 06:53 PM ---------- Previous post was at 06:51 PM ----------
Silesh.Nair said:
It does atleast for me.
Click to expand...
Click to collapse
Because i had glitched my rom after installing beanstalk and then stock but in stock its not showing volte box. And i had downloaded many stock ROMs but none of them worked i flashed them with Twrp 3.0.2.0 and it always shows error please help. Thanks in advance.
Yes. Check the screenshots I posted and follow instructions posted in the OP.
Sent from my Moto G4 Plus using Tapatalk
Badboy_deepz said:
Does it supports jio sim data + volte fine?
---------- Post added at 06:53 PM ---------- Previous post was at 06:51 PM ----------
Because i had glitched my rom after installing beanstalk and then stock but in stock its not showing volte box. And i had downloaded many stock ROMs but none of them worked i flashed them with Twrp 3.0.2.0 and it always shows error please help. Thanks in advance.
Click to expand...
Click to collapse
Stock roms are not flashed using twrp. You do it thru fastboot.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
Stock roms are not flashed using twrp. You do it thru fastboot.
Click to expand...
Click to collapse
U mean adb fastboot sir as i m new to this !
Badboy_deepz said:
U mean adb fastboot sir as i m new to this !
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695
Silesh.Nair said:
http://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1643-updated-signed-t3460695
Click to expand...
Click to collapse
So does it lock my bootloader ? Can i root that again? Sorry for annoying u
You don't need to lock your bootloader. Just flash everything except the recovery. That way you'll retain the twrp recovery.
Sent from my Moto G4 Plus using Tapatalk
Silesh.Nair said:
Same procedure as on cm.
Click to expand...
Click to collapse
link to download this rom?
Badboy_deepz said:
link to download this rom?
Click to expand...
Click to collapse
Link is in op
@Silesh.Nair Correct Me If It's Out Of Ur Control, But I Think That File Manager And Music Player Should Be Atleast Pre Installed In This Battery Friendly Butter Smooth ROM.
By The Way, Thanks For Making An Awesome ROM For Both Speed And Juice. :victory:
Badboy_deepz said:
link to download this rom?
Click to expand...
Click to collapse
OP
Send with my Moto G4 Plus (XT1642) with CM13 using Tapatalk!
tried everything but still volte not working
Silesh.Nair said:
Same procedure as on cm.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
I did everything u mentioned to work jio sim but still volte not working! help me out.
tried without g apps
Silesh.Nair said:
Same procedure as on cm.
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
And I tried without g apps does it affect?
Silesh.Nair said:
Yes. Check the screenshots I posted and follow instructions posted in the OP.
Click to expand...
Click to collapse
Followed every single instruction still volte not working ! Have a look

[rom][7.1.2][unofficial] aicp 12.1 | 18 11 2017

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project​
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then evolved into a mature ROM with the BEST community you can find!!!
Until Lollipop, the Rom has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM when it comes to hardware, drivers and some features.
With the rebrand of CM to LineageOS (LAOS) we are now actually LAOS based with some tweaks from AOSP.
If there are any bugs, either we will sort them out or the LAOS team will if it concerns their code base. This rom isn't LAOS supported, so no need to report errors or bugs to them!!
Code:
#include
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough Overview)
In the beginning we would like to thank:
LineageOS & CM (R.I.P.) team
Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@Drgravy
@Hashbang173
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
Latest Stable Release Version 12.1
Download link:
ROM
Google Apps:
Beans gapps
Or
Open GApps (ARM or ARM64 7.1 pico or nano, depending on your phone's architecture)
Non so far...
FAQ:]​
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look in the OP to see, if your device is build on a nightly or weekly schedule.
Q. Does this ROM support custom kernels?
A. No. You can still use them (as long as they are LOS based), but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP, custom ROM's modify the framework a lot, so Xposed can cause a ton of issues on custom ROM's. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. You will need to use the version arm64/arm for SDK 25.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the install instructions in the first post...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I dirty flash builds?
A. Wipe System, Cache and ART/Dalvik cache. Flash the ROM, your preferred root solution and reboot. Or you might just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. Boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot", then swipe to flash, then go back to the install screen and install your root method again if you don't want to loose root, and then reboot.
A2. LOS based kernels sometimes come as a flashable ZIP file too. You can flash them together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue, if you don't want to loose root. Now swipe to flash, clear Cache & ART/Dalvik cache and then reboot.
Using the ROM:
Q. How do I enable software buttons?
A. Settings -> Navigation -> Enable navigation bar. The bar can be configured separately in its settings.
Q I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A In TWRP, flash the substratum rescue zip in the substratum folder on the internal storage.
Q I keep losing root with Magisk, how do I fix it?
A Check this out, if that doesn't work for you ask for help in this thread, read or ask in the Magisk thread on XDA or just flash Magisk again!
Q I'm having issues with WhatsApp, how do I fix it?
A Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the root section in the AICP Extras menu.​
​The ROM should contain everything you need to enjoy Android Nougat. You don't need to install any Add-Ons, simply download the latest ROM, GApps, flash it and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing, and if possible avoid restoring system apps and system data with Titanium Backup as this can cause stability issues that are very hard to debug.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash:​(Again: Don't do it if you don't know it!)
1. Download the ROM and GApps and transfer them to your device
2. Boot to recovery (TWRP recommended)
3. Wipe system, Cache, data and ART/Dalvik cache
4. Flash ROM Zipfile
5. Flash/Install GApps (optional, needed for e.g. Google Playstore to work)
6. Flash/Install the root solution of choice (optional)
7. Reboot to system
The ROM has GApps persistance in between dirty flashes, so you only have to flash them once!
The root solution should be flashed together with every OTA update (= ROM Update)!
Supported root solutions:​Magisk v13.x
SuperSU - stable and beta available (Site by CCMT that took over the the marketing from chainfire)
SuperSU - direct download link for the latest SuperSU directly from the dev (chainfire)
Lineage SU-addon (check your needed version: 14.1 arm or arm64) -> the removal zip is available here too.
KERNEL:
The kernel in this ROM follows LAOS source with custom additions from AOSP.
PREREQUISITE FOR OTA:​To be able to flash using the buildin OTA app that needs TWRP recovery installed to work.
You can still use LAOS recovery and OTA app, but you will need to download the zip file and flash it manually from within your recovery. Zip gets saved in the "AICP_ota" folder on your internal storage.
Please be sure that you are on the latest TWRP recovery.
If you want to contribute to the AICP or wanna see what is being worked on/merged, feel free to visit our Gerrit review system. (Link is at the bottom!!!)
ROM & Additional links:
Rom
Gerrit Code Review
Github
IceColdJelly AICP G+ community
Contributors
(mention all the devs who have contributed to your device tree, kernel, vendor, etc,
only mention the main ones though, probably the top four or so, otherwise this list will be a mile long unless if you're a huge kanger xD)
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.10.107-lineageOS
Version Information
Status: Stable
Stable Release Date: 18-11-2017
Creation date: 18-11-2017
Last Updated: nightly
You want to see a normal night at the "DEV office", click here!!​
what about the camera and avg sot on this rom!
cjcool_123 said:
what about the camera and avg sot on this rom!
Click to expand...
Click to collapse
Camera is working fine and average sot should be around 3-4 , also matters on how you use the phone
Sent from my Moto G4 Plus using Tapatalk
any difference dassa rom for official
LINK IS BACK UP
Sent from my Moto G4 Plus using Tapatalk
cadusinho said:
any difference dassa rom for official
Click to expand...
Click to collapse
I don't know what you are asking
Sent from my Moto G4 Plus using Tapatalk
Snekxs said:
LINK IS BACK UP
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
No it isn't. All I get is an error message that it "can't reach this page".
pastorbob62 said:
No it isn't. All I get is an error message that it "can't reach this page".
Click to expand...
Click to collapse
Try now
Sent from my Moto G4 Plus using Tapatalk
Snekxs said:
Try now
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
:good: Works great! Thank you.
Has anyone successfully flashed this yet?
Sent from my Moto G4 Plus using Tapatalk
JACC (THE FLASH) said:
Does anyone know how to enable the kill app option? [emoji848]
Click to expand...
Click to collapse
Are you talking about the kill app button in the notification drawer
Sent from my Moto G4 Plus using Tapatalk
Snekxs said:
Are you talking about the kill app button in the notification drawer
Click to expand...
Click to collapse
no, it's in the navigation bar
JACC (THE FLASH) said:
no, it's in the navigation bar
Click to expand...
Click to collapse
I don't think that feature is present in this rom
Sent from my Moto G4 Plus using Tapatalk
Snekxs said:
Has anyone successfully flashed this yet?
Sent from my Moto G4 Plus using Tapatalk
Click to expand...
Click to collapse
Yes. I clean flashed it on my XT1625 and it works great. Been running for about 14 hours and I am very pleased with it so far. Haven't seen any issues up to this point. Battery life seems decent but need to run it for a few days to get an honest take on that. Smooth and responsive overall.
Great job! :good::good::good::good::good:
In aicp official i get error on my sd card, is this rom get a trouble with sd card too?
dedik46 said:
In aicp official i get error on my sd card, is this rom get a trouble with sd card too?
Click to expand...
Click to collapse
SD Card is working perfectly fine
Screen Shots
dedik46 said:
In aicp official i get error on my sd card, is this rom get a trouble with sd card too?
Click to expand...
Click to collapse
No, sd card is working fine
Enviado desde mi Moto G4 Plus mediante Tapatalk
All custom kernels should be working on this rom
Flash this rom in the morning and everything is working well thanks for updating this rom

Categories

Resources