I got my OP3 today and am trying to unlock the bootloader. I've tried every tutorial and toolkit out there but they all get stuck at the same point in adb, "waiting for device". The "adb devices" command works fine but anything else gets stuck on "waiting for any device". I've tried googling the issue but none of the suggestions have worked so far. Any input would be great.
did you enable oem unlocking from developer options?
bro you may be running win 10 and to connect fastboot on that u need adb driver which u will find on windows update all u have to do is just connect your phone with data transfer mode and update the window 10 . ull find something name qalllcom its adb drive or i dont but after that it will like charm.
I have all the necessary developer options checked. After futzing with it for hours, I tried a different computer (also Windows 10) and it worked right away. I'm going to see what the driver issue is this evening because I still would like to use the original computer I was using. Thanks for the replies!
What does "adb devices" return?
aadityarulez said:
What does "adb devices" return?
Click to expand...
Click to collapse
Screenshot:
for bl unlock, you need to be at fastboot mode, and installed right driver, for me working any of stock Google USB package fastboot bootloader driver.
Go to fastboot mode and do "fastboot devices", then try unlocking bl.
You can install the driver after disabling the driver enforcement..
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
You can install the driver after disabling the driver enforcement..
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
I've tried everything including disabling driver enforcement on Win 10 but I still have the same issue. I have the wrong drivers installed. I've tried uninstalling and reinstalling the drivers but when I plugin the phone, the wrong drivers get installed. I got it to work on another Windows 10 computer and below are device manager screenshots of the working (with right drivers) and not working (with wrong drivers) computers. I have no idea how to get the right drivers installed on the computer where its not working and unfortunately, its the primary computer I use.
shobuddy said:
I've tried everything including disabling driver enforcement on Win 10 but I still have the same issue. I have the wrong drivers installed. I've tried uninstalling and reinstalling the drivers but when I plugin the phone, the wrong drivers get installed. I got it to work on another Windows 10 computer and below are device manager screenshots of the working (with right drivers) and not working (with wrong drivers) computers. I have no idea how to get the right drivers installed on the computer where its not working and unfortunately, its the primary computer I use.
Click to expand...
Click to collapse
Right click, uninstall the wrong drivers.. Tick delete button too in the dialog prompt. Try installing now.
Sent from my Xiaomi Mi 5 using XDA Labs
harish15 said:
Right click, uninstall the wrong drivers.. Tick delete button too in the dialog prompt. Try installing now.
Sent from my Xiaomi Mi 5 using XDA Labs
Click to expand...
Click to collapse
I've tried this several times over. I do not get the tick option to delete.
shobuddy said:
I've tried this several times over. I do not get the tick option to delete.
Click to expand...
Click to collapse
Pm me, if case, you need some guidance.
Sent from my Xiaomi Mi 5 using XDA Labs
Same here. When I reboot in fastboot mode, the driver adb interface disappears and I get the Android Bootloader Interface (Kedacom USB Driver).
"waiting for any device" each time.
Thx for help
shobuddy said:
I've tried this several times over. I do not get the tick option to delete.
Click to expand...
Click to collapse
Try this:
Connect the op3 to usb port - don't bother changing from "charging"
Right click on "ADB Interface" in dev man and disable it.
Without unplugging the op3 use the buttons to reboot into bootloader.
Hopefully W10 will now detect your op3 and either load the correct "oneplus" driver or create a new entry in dev man of Other Devices > Android Composite ADB Interface. Right click on this and then Update driver software > Browse my computer.... > Let me pick... > and if you're lucky One plus will show up in the manufacturer column and allow you to select the composite interface
peterk-1 said:
Try this:
Connect the op3 to usb port - don't bother changing from "charging"
Right click on "ADB Interface" in dev man and disable it.
Without unplugging the op3 use the buttons to reboot into bootloader.
Hopefully W10 will now detect your op3 and either load the correct "oneplus" driver or create a new entry in dev man of Other Devices > Android Composite ADB Interface. Right click on this and then Update driver software > Browse my computer.... > Let me pick... > and if you're lucky One plus will show up in the manufacturer column and allow you to select the composite interface
Click to expand...
Click to collapse
I tried this but didn't see any new/different entry in DM when I rebooted into bootloader. Didn't see OnePlus under manufacturers either.
cyspak said:
Same here. When I reboot in fastboot mode, the driver adb interface disappears and I get the Android Bootloader Interface (Kedacom USB Driver).
"waiting for any device" each time.
Thx for help
Click to expand...
Click to collapse
Okay so this is the problem. I figured it out 2 days ago.
check the bootloader driver when you're in fastboot. Right click it and update driver, it should be the Android Bootloader 9.00, and not Bootloader 11.00
it's a silly weird fix, but it should be under Android and not Kedacom
I was using the Android SDK Studio Platform Tools and Google Drivers provided from SDK Studio
deleted
Similiar to the previous users post I'll try and be a bit more clear.
unplug your device if plugged in.
boot in to fastboot mode on your device.
Go to your PC and access device manager
plug your device in and you should see
"kedacom" instead of android interface
now inside you wanna click update driver
browse my compute for driver software > let me pick from a list of driver software > "Android adb sooner interface"
if its not that exact one check for the one that does say adb interface.
https://www.youtube.com/watch?v=Gdl6P2akRK0
I created a bootable USB drive with Linux Mint to solve my problem. It was Windows 10 that would recognize my OnePlus 3 in "Fastboot Mode" with Kedacom drivers.
Related
I was reading some instruction from htcevohacks.com. Since i didn't decide to root or not yet, i just want to install those sdk and driver on my pc. sdk part is easy, and i installed it successfully. But adb driver part is tricky.
I followed instruction, turn on "USB debugging" in the settings, and reboot phone into recovery mode, plugged usb cable. However, the device manager of windows 7 didn't find any adb devices, then i tried refresh, still no lucky at all. what should I do to find adb device then update driver? or i have to root first b4 installing adb driver?
Install HTC Sync, then reboot your computer
JvIo55iBl3r said:
I was reading some instruction from htcevohacks.com. Since i didn't decide to root or not yet, i just want to install those sdk and driver on my pc. sdk part is easy, and i installed it successfully. But adb driver part is tricky.
I followed instruction, turn on "USB debugging" in the settings, and reboot phone into recovery mode, plugged usb cable. However, the device manager of windows 7 didn't find any adb devices, then i tried refresh, still no lucky at all. what should I do to find adb device then update driver? or i have to root first b4 installing adb driver?
Click to expand...
Click to collapse
I did, actually. As a matter of fact, i do have that sync icon in my task bar
I am not sure, but i was wondering if the adb driver is necessary to be installed?
Yeah the HTC Sync.exe will have the drivers. Check your hardware configuration to make sure it's installed right then in the folder with adb installed use the command prompt to go: adb devices -> You should see a device with numbers. then you correctly installed it
adseguy said:
Yeah the HTC Sync.exe will have the drivers. Check your hardware configuration to make sure it's installed right then in the folder with adb installed use the command prompt to go: adb devices -> You should see a device with numbers. then you correctly installed it
Click to expand...
Click to collapse
the problem right now is the device manager cannot even find any "other device" with question mark(when i plug the phone, which is under recovery mode, by usb cable)
JvIo55iBl3r said:
the problem right now is the device manager cannot even find any "other device" with question mark(when i plug the phone, which is under recovery mode, by usb cable)
Click to expand...
Click to collapse
this should definitely be in the Q&A board, not the developers board.
since you've already installed htc sync, the drivers should already be properly installed on your system.
ive only ran win xp and vista, not familiar with win 7, but if its designed the same, having no question marks, sounds like all connected devices have drivers properly installed ...
how do you know your adb drivers aren't installed? have you tried using adb? if so, what error does adb show?
Exit HTC sync first on your computer so it is not running or just uninstall it. It should find it after that.
joeykrim said:
this should definitely be in the Q&A board, not the developers board.
Click to expand...
Click to collapse
Sorry about that, will do next time
joeykrim said:
since you've already installed htc sync, the drivers should already be properly installed on your system.
ive only ran win xp and vista, not familiar with win 7, but if its designed the same, having no question marks, sounds like all connected devices have drivers properly installed ...
how do you know your adb drivers aren't installed? have you tried using adb? if so, what error does adb show?
Click to expand...
Click to collapse
i tried command "adb device", i got some serial number, does that mean adb driver has been successfully installed on my pc, and work properly?
JvIo55iBl3r said:
Sorry about that, will do next time
i tried command "adb device", i got some serial number, does that mean adb driver has been successfully installed on my pc, and work properly?
Click to expand...
Click to collapse
any help? anyone?
Ok. I can't get fastboot to work. WIndows 10 laptop. Disabled driver verification. ADB works fine and reboots into bootloader but once in bootloader no fastboot. I've got an "Unknown Device" in Other Devices in Device manager and I've tried to assign the google driver manually but it's not recognized as a driver for the device
I've removed and reinstalled drivers pre and post driver verification
I tried adding PIxel C lines to the driver INF file as instructed on stack overflow
I don't know what else to try. And i've tried on two different computers???
Help please.. thanks
I fought with this for ages today. To start with, I have the Wugfresh Nexus Root Toolkit installed. Now, when in bootloader, go to the device manager on your computer. Find the Pixel ("Unknown Device") and right click > Properties > Driver tab > Update Drivers > Browse Computer > Choose From List > WugFresh Development\Nexus Root Toolkit\data\Drivers > and pick the one that says something about the bootloader. Sorry, going off memory here. Now you should be able to get that one installed, and Fastboot will start showing up when in the bootloader.
Hakizi said:
I fought with this for ages today. To start with, I have the Wugfresh Nexus Root Toolkit installed. Now, when in bootloader, go to the device manager on your computer. Find the Pixel ("Unknown Device") and right click > Properties > Driver tab > Update Drivers > Browse Computer > Choose From List > WugFresh Development\Nexus Root Toolkit\data\Drivers > and pick the one that says something about the bootloader. Sorry, going off memory here. Now you should be able to get that one installed, and Fastboot will start showing up when in the bootloader.
Click to expand...
Click to collapse
I did the same : Choose from List >fastboot (I didn't install Wug)
jamgam said:
Ok. I can't get fastboot to work. WIndows 10 laptop. Disabled driver verification. ADB works fine and reboots into bootloader but once in bootloader no fastboot. I've got an "Unknown Device" in Other Devices in Device manager and I've tried to assign the google driver manually but it's not recognized as a driver for the device
I've removed and reinstalled drivers pre and post driver verification
I tried adding PIxel C lines to the driver INF file as instructed on stack overflow
I don't know what else to try. And i've tried on two different computers???
Help please.. thanks
Click to expand...
Click to collapse
This is what worked for me....
http://forum.xda-developers.com/showpost.php?p=64777133&postcount=96
jamgam said:
Ok. I can't get fastboot to work. WIndows 10 laptop. Disabled driver verification. ADB works fine and reboots into bootloader but once in bootloader no fastboot. I've got an "Unknown Device" in Other Devices in Device manager and I've tried to assign the google driver manually but it's not recognized as a driver for the device
I've removed and reinstalled drivers pre and post driver verification
I tried adding PIxel C lines to the driver INF file as instructed on stack overflow
I don't know what else to try. And i've tried on two different computers???
Help please.. thanks
Click to expand...
Click to collapse
I had the same problem man. This will fix it.
1. Open Device Manager and Select the Unknown Device
2. Select Update Driver
3. Select Browse My Computer
4. Select Let Me Pick From a List of Device Drivers On My Computer
5. Select Android
6. Select Android Bootloader
Done.
@Istvan_86,
We should move the discussion for your problem here.
cam30era said:
@Istvan_86,
We should move the discussion for your problem here.
Click to expand...
Click to collapse
Hello,
I don't see any link and sorry if I made too many posts.
Istvan_86 said:
Hello,
I don't see any link and sorry if I made too many posts.
Click to expand...
Click to collapse
That's OK. No problem. Did you try the steps in post #5 above?
Which operating system are you on? What worked for me on Windows 10 was to give up after several days and use a Windows 7 computer. I read everything and tried everything and I could not get Fastboot working on this device with Windows 10. I used every toolkit, every driver version, toolkits that install multiple driver versions, Minimal ADB + Fastboot, and who knows what else. If a well-documented end-to-end solution to this ever appears I'll be really grateful.
FWIW, it was my frustrations with this Windows driver nonsense, that eventually drove me to abandon Windows entirely. Been on Ubuntu for several years. No regrets.
cam30era said:
That's OK. No problem. Did you try the steps in post #5 above?
Click to expand...
Click to collapse
Thanks for point me here, yo offer me too much help.
Now I´m on Nougat working flawlessly.
CISGS said:
I had the same problem man. This will fix it.
1. Open Device Manager and Select the Unknown Device
2. Select Update Driver
3. Select Browse My Computer
4. Select Let Me Pick From a List of Device Drivers On My Computer
5. Select Android
6. Select Android Bootloader
Done.
Click to expand...
Click to collapse
Really, really, really thanks. I have the exact same issue and this solved it for me also.
Cheers!
Istvan_86 said:
Thanks for point me here, yo offer me too much help.
Now I´m on Nougat working flawlessly.
Really, really, really thanks. I have the exact same issue and this solved it for me also.
Cheers!
Click to expand...
Click to collapse
Welcome.
cam30era said:
FWIW, it was my frustrations with this Windows driver nonsense, that eventually drove me to abandon Windows entirely. Been on Ubuntu for several years. No regrets.
Click to expand...
Click to collapse
It's very annoying, there seems to be a few reasons it fails. Cable, 3.0 usb ports, windows 10 drivers. I get different results with different cables in different types of usb ports. Also switching to PTP seems to work using a usb 2.0 port with a standard usb 2.0 A to micro with a micro to c adapter. Charging and MTP fail, but at least ADB and Fastboot respond.
I am going to try to edit the win10 driver using this post as reference.
http://stackoverflow.com/questions/34775508/where-is-the-windows-adb-driver-for-the-pixel-c
---------- Post added at 11:05 PM ---------- Previous post was at 11:04 PM ----------
CISGS said:
I had the same problem man. This will fix it.
1. Open Device Manager and Select the Unknown Device
2. Select Update Driver
3. Select Browse My Computer
4. Select Let Me Pick From a List of Device Drivers On My Computer
5. Select Android
6. Select Android Bootloader
Done.
Click to expand...
Click to collapse
I came to the same conclusion, but after a reboot it was unrecognized again.
Only way I can it to stick is installing the 2nd option drivers via skipsoft toolkit. Connect pixel c via 2.0 port and cable to PC. Switch to ptp. Then manually force install driver choosing have disk using bootloader option. From then on it works using ptp.
What I am able to see using USB Device Tree Viewer, is that when I plug in my Pixel C to my ASUS Z97-A blue usb ports with USB debugging enabled, it can not identify it. Those ports use Microsoft Windows 10 drivers for the Intel USB 3.0 eXensible Host Controller - 1.0. Which is what is causing the failure, not the Pixel C drivers. When I updated my other green USB ports driver, windows used the same ones on my ASMedia USB 3.1 eXtensible Host Controller and also couldn't recognize the Pixel C any longer. I rolled back to ASMedia drivers, it worked fine. Updated using newer ASMedia drivers 4/11/2016 ver 1.16.35.1 and those work fine. Now to find working drivers for the Inter Host. Win7 drivers refuse to load.
UPDATE: If your bios allows, disable xHCI. Your USB ports will work as USB 2.0 but will detect your PIXEL C without issues.
Solution works 100%
If you've installed the SDK drivers and win10 can detect your Pixel C in every mode with usb debugging off. Use these win10 USB xHCi drivers,
http://www.win-raid.com/t834f25-USB-Drivers-original-and-modded.html
@clockcycle,
This solution works 100% too. https://www.ubuntu.com/
CISGS said:
I had the same problem man. This will fix it.
1. Open Device Manager and Select the Unknown Device
2. Select Update Driver
3. Select Browse My Computer
4. Select Let Me Pick From a List of Device Drivers On My Computer
5. Select Android
6. Select Android Bootloader
Done.
Click to expand...
Click to collapse
Been smashing my face off the wall since LAST NIGHT trying to figure this out. windows 7 machine/ windows 8/ ubuntu ! trying 100 different methods and this one FINALLY SOLVED THE ISSUE. gawd dayum thank you so much from the future !!!
So I'm running windows 10 on my pc and my op3 is easily found by windows. When I enter fastboot mode on my op3, the command "fastboot devices" doesn't show my op3. I used that 15 sec adb & fastboot installer.
MrHaPpY66 said:
So I'm running windows 10 on my pc and my op3 is easily found by windows. When I enter fastboot mode on my op3, the command "fastboot devices" doesn't show my op3. I used that 15 sec adb & fastboot installer.
Click to expand...
Click to collapse
Have you enabled oem unlocking from developer options?
I'm having the same problem. After going back to Oxygen OS (now 3.5.4) from MIUI 8 fastboot just doesn't work anymore. ABD works just fine (tried on Minimal ABD and Fastboot on Windows and ABD installed over Android Studio on Ubuntu. Fastboot did recognize the phone on Ubuntu but flashing TWRP resolved in a bootloop (tried the old and the new recovery image).
All drivers are installed on both Windows and Ubuntu (I even removed all drivers on Windows and added them again) and just to make sure everything gets installed I disabled driver signature verification on Windows, but as I said - still no luck.
Edit: Of course USB Debugging and OEM Unlocking is enabled (my bootloader is also unlocked since I already had tried out multiple roms)
Had the same Problem, Win10 is the Problem + the old OP Drivers + the new Update to Win10 etc.
Nothing worked, tryed everything. Created a Thread last week here also...
After that i created a new Partition and installed Win7 on it. All works fine, only thing is while Boot ur System u have to pick ur OS or it waits 30sec to boot up but thats ok.
Now i have Win10 for everything and i reboot to win7 for Fastboot/OP3
http://forum.xda-developers.com/oneplus-3/help/connect-to-phone-adb-fastboot-t3485079
Didnt tryed the last Tip.
KornY10 said:
Win10 is the Problem
Click to expand...
Click to collapse
Can't solve your problem, but OP3 fastboot does work in Windows 10. I did have to disable driver signature verification to install the driver in the first place, and you'll have to leave it off for the driver to stay functional, but it definitely works on Win 10.
I dont tryed ur Way, so yes after disable Driver sign. it works like u Said but i did not Test it.
i had the same problem to find the correct adb driver spent many hours but it didnt work so after that last i try to update windows 10 and find adb driver there after updating window its work like charm so all u have to do is just connect ur phone with data transfer mode on and search the window automatic updates .
Same here
It's driving me crazy. I've updated from a rooted stock OS (incl TWRP) via full OTA directly to 3.2.7, which removed TWRP and root.
I now cannot enter a Fastboot mode which detects the USB connection. Thus I can't flash TWRP again and can't root my phone, making lots of apps unusable.
I've tried every suggestion on every thread but nothing works...
Sent from my ONEPLUS A3003 using Tapatalk
Also got kedacom on my device manager after automatic driver update but my phone still isn't recognised in adb devices, does everyone else's serial number show up?
You guys still have the problem?
Sent from my Xiaomi Mi 5 using XDA Labs
Managed to solve it: Disable driver signature verification (follow howtogeek guide) then reinstall Drivers from Oneplus. Go to device manager chose the Kedacom Device and select the correct Oneplus Driver instead then reboot PC and Phone and now it should work
SgtIcetea said:
Managed to solve it: Disable driver signature verification (follow howtogeek guide) then reinstall Drivers from Oneplus. Go to device manager chose the Kedacom Device and select the correct Oneplus Driver instead then reboot PC and Phone and now it should work
Click to expand...
Click to collapse
Good that you found the solution..
Sent from my Xiaomi Mi 5 using XDA Labs
Well I didn't really solve the problem on win 10 so i just decided to use Ubuntu instead. Worked well
SgtIcetea said:
Managed to solve it: Disable driver signature verification (follow howtogeek guide) then reinstall Drivers from Oneplus. Go to device manager chose the Kedacom Device and select the correct Oneplus Driver instead then reboot PC and Phone and now it should work
Click to expand...
Click to collapse
I tried that too, but didn't work. What driver did you select in Device manager?
superiscch said:
I tried that too, but didn't work. What driver did you select in Device manager?
Click to expand...
Click to collapse
Rebooted both devices, OP3 was in fastboot. Then there was a Driver called Oneplus Bootloader Interface (or something similar)
SgtIcetea said:
Rebooted both devices, OP3 was in fastboot. Then there was a Driver called Oneplus Bootloader Interface (or something similar)
Click to expand...
Click to collapse
The driver that shows up as a spare drive when you connect the phone? Tried that too, no good. Going to boot Ubuntu later today, hope that works. I just need twrp, then I'm good ?
superiscch said:
The driver that shows up as a spare drive when you connect the phone? Tried that too, no good. Going to boot Ubuntu later today, hope that works. I just need twrp, then I'm good
Click to expand...
Click to collapse
Yeah that one. After disabling the driver signature verification you have to re install it, when it's not disabled windows just doesn't install it although it says it does. After I disabled it Windows actually showed a completely new window during installation to install the driver properly
superiscch said:
The driver that shows up as a spare drive when you connect the phone? Tried that too, no good. Going to boot Ubuntu later today, hope that works. I just need twrp, then I'm good
Click to expand...
Click to collapse
Man, had to just do it through my Ubuntu VM. Tried Win 10 Win 7, all gave me troubles.
Started Ubuntu, setup ADB and unlocked in a breeze
i have same problem
Hi,
I try to flash my OP3.
I did first the UNLOCK, that worked with the CMD (Running Windows 10).
My device is Unlocked.
But when I wanna try fastboot flash recovery recovery.img
Or I type then it says waiting for device...
and when i typ: fastboot devices
then if gives nothing.
Yes, I did the OEM unlock in developers options en USB debugging is on.
HELP!
HELP!
Try manual boot into fastboot mode https://youtu.be/7ihDGm3EX_o and then reconnect.
peterk-1 said:
Try manual boot into fastboot mode https://youtu.be/7ihDGm3EX_o and then reconnect.
Click to expand...
Click to collapse
Yes, I did that.
But not working...
Over WiFi it's working, but not with USB.
Oke, ADB is working, but only when the device in ON.
When I does the device in Fastboot.
Than it doesn't work!
HELP!
Oke, I fix it.
Did it in an VM with Windows 7.
Bye.
YourTheBest said:
Oke, I fix it.
Did it in an VM with Windows 7.
Bye.
Click to expand...
Click to collapse
I'm also stuck with this, could briefly tell me how you set up a VM with window's 7 please? I tried with Ubuntu but no luck installing the adb and fastboot? Stuck with no recovery so please help
First Tick OEM unlock and enable usb debugging. And install latest driver
Ajshal said:
First Tick OEM unlock and enable usb debugging. And install latest driver
Click to expand...
Click to collapse
Way past that mate everything is installed, I need to get device to show in fastboot as it's currently not showing
How did you install the driver? do you have windows 8 or above?
daviss101 said:
Way past that mate everything is installed, I need to get device to show in fastboot as it's currently not showing
Click to expand...
Click to collapse
I have same pblm on my LG K10 dude
therightperson_630 said:
How did you install the driver? do you have windows 8 or above?
Click to expand...
Click to collapse
At first it it was called Marshall London bootloader interface but after clicking automatic driver update it then showed as "kedacom bootloader" it does show its in adb mode thou. Is there any Google/Samsung drivers you could link me?
Edit- windows 10
daviss101 said:
At first it it was called Marshall London bootloader interface but after clicking automatic driver update it then showed as "kedacom bootloader" it does show its in adb mode thou. Is there any Google/Samsung drivers you could link me?
Edit- windows 10
Click to expand...
Click to collapse
Ok, not sure if you know about this, but you'll have to install the drivers with signed driver enforcement turned off in windows 10:
Setting > update & security > recovery tab > Advanced start-up (restart now).
On boot up you'll use the function keys to turn off "signed driver enforcement" or something similar.
Then try and install adb/fastboot from this http://forum.xda-developers.com/showthread.php?t=2317790
It should come up with an extra security window during the installation - the driver will be properly installed and you'll be able to use fastboot on your OP3
therightperson_630 said:
Ok, not sure if you know about this, but you'll have to install the drivers with signed driver enforcement turned off in windows 10:
Setting > update & security > recovery tab > Advanced start-up (restart now).
On boot up you'll use the function keys to turn off "signed driver enforcement" or something similar.
Then try and install adb/fastboot from this http://forum.xda-developers.com/showthread.php?t=2317790
It should come up with an extra security window during the installation - the driver will be properly installed and you'll be able to use fastboot on your OP3
Click to expand...
Click to collapse
Okay thanks, I have tried that step but that's when it changed to kedacom via automatic update. I'm confused here I downloaded official oneplus drivers and installed and my phone is perfectly recognised as A300 when its file transfer but when you say install drivers which ones can I download to install manually to remove kedacom? Thanks your time to help but I'm completely stuck
daviss101 said:
Okay thanks, I have tried that step but that's when it changed to kedacom via automatic update. I'm confused here I downloaded official oneplus drivers and installed and my phone is perfectly recognised as A300 when its file transfer but when you say install drivers which ones can I download to install manually to remove kedacom? Thanks your time to help but I'm completely stuck
Click to expand...
Click to collapse
go to device manager and manually uninstall kedacom driver and install minimal adb/fastboot from the link I posted, they'll install the driver automatically
daviss101 said:
Way past that mate everything is installed, I need to get device to show in fastboot as it's currently not showing
Click to expand...
Click to collapse
Just install an FRESH Windows 7.
Install ADB Drivers
Install OP3 drivers
And than open CMD an enter the commands.
YourTheBest said:
Just install an FRESH Windows 7.
Install ADB Drivers
Install OP3 drivers
And than open CMD an enter the commands.
Click to expand...
Click to collapse
How do I get a free version of windows 7 without downloading a cracked ISO?
Hi there,
I'm trying to install TWRP. But I can't do any fastboot command. ADB works. Device isn't recognized in system and with "fastboot devices" nothing shows up. :/
I've tryed many drivers but nothing works.
I'm using Win 10 x64. Does anyone have a suitable way to get it working?
Thanks!
Mambobuzzz
Mambobuzzz said:
Hi there,
I'm trying to install TWRP. But I can't do any fastboot command. ADB works. Device isn't recognized in system and with "fastboot devices" nothing shows up. :/
I've tryed many drivers but nothing works.
I'm using Win 10 x64. Does anyone have a suitable way to get it working?
Thanks!
Mambobuzzz
Click to expand...
Click to collapse
This is a problem related to Windows 10 that uses the wrong driver.
Somewhere I have found a guide to manually choose the correct one, but at the moment I don't remember where... googling you will find instructions
Mambobuzzz said:
Hi there,
I'm trying to install TWRP. But I can't do any fastboot command. ADB works. Device isn't recognized in system and with "fastboot devices" nothing shows up. :/
I've tryed many drivers but nothing works.
I'm using Win 10 x64. Does anyone have a suitable way to get it working?
Thanks!
Mambobuzzz
Click to expand...
Click to collapse
This is not the Q&A section. Please post your questions there, according to the forum rules. Can a moderator please move this? Thanks.
Monfro said:
This is a problem related to Windows 10 that uses the wrong driver.
Somewhere I have found a guide to manually choose the correct one, but at the moment I don't remember where... googling you will find instructions
Click to expand...
Click to collapse
I've googled it. Tried many. Event tried to boot Windows without driver signature. Didn't work. :/
michie said:
This is not the Q&A section. Please post your questions there, according to the forum rules. Can a moderator please move this? Thanks.
Click to expand...
Click to collapse
Oh sorry.
Does someone have an idea?
This might come a year too late, but in case someone else runs into the same problem (like myself), you can solve it by installing the latest (signed) ADB drivers with this Tool, then rebooting the tablet to fastboot mode and run the tool again. This still doesn't install the correct fastboot drivers, but it should now be listed as "ADB Interface" -> "Unknown Device" in the device manager, and if you right click and choose "Update driver" -> "Browse my computer for driver software", you should see a driver called "Fastboot interface (Google USB ID)", that installs and works correctly for the Pixel C.
@Mambobuzzz
One option you have and it's been updated this month too, is you could try installing and using tiny adb & fastboot from here: https://forum.xda-developers.com/t/tool-windows-tiny-adb-fastboot-august-2021.3944288/
I can't stand Windows for a few reasons! Make a live USB and try a Linux distro! You will never have this problem again and I guarantee you won't miss Windows.
Edit added:
Reasons why this is happening:
Bad connection somewhere.. The USB connection you are plugging in to on your PC could be messed up, the USB cord could be messed up, or where your type c plugs in to your device is messed up.... Oooorrrrr it's driver issue. And knowing Windows I betcha it's a driver issue. When you plug your tablet in are you enabling USB debugging and developer options and changing the "default USB configuration" from "Charging" to "File tansfer ?" And when you do those things are you watching the table REALLY CLOSELY for the little box that pops up for 5 seconds that you MUST put a checkmark in otherwise adb and fastboot will not work? Reboot a few times on your PC and update the drivers in Windows Device manager.. I remember once I had to reboot 3-4 times to finally get mine working. When you type adb --version then push enter in terminal and fastboot --version push enter what does it say?