Hi All,
Great forum, used it a lot with several devices.
So, I just got my Huawei watch and it is great!!
I do have some questions and tips that it will be great if you could help me with and I couldn't find answers to (sorry if its too long...)
1. Charging - what is the best way to charge it in order keep the battery life? like everyday few mins? everyday to full charge? let it drop until X%?
2. Always on option - is there an option to make it sleep at night? like I like this option very much, but as I don't sleep with it, I think it is better that the screen will be off at night.
in addition, do it harm the screen if always on working all the time?
3. Reset - do you reset the devise occasionally? like in purpose. I mean, on my Samsung S6 i know that once in a while I need to reset it to get a better performance.
3. Steps tracking - I was with the blue moon face and noticed that the steps showed is updated after few seconds, meaning that let's say I walked 50 steps, I stop, look at the watch, see the old steps count and after 2-3 seconds it is "jumped" and updated to the new count. in addition, if I stop, wait this few seconds and look at the watch, the count is ok - is this normal?
4. fitness app - which app to use with it that will sync the best with my phone? I installed Google fit and its not doing the job good. it looks like it count steps from the phone and not the watch, or mixed it together, In addition the distance and calories count is way not true, like it show the distance far low then the true (I updated my height and weight, over the app and on the watch) and the calories far more then it is.
In addition I installed the Huawei wear app and it looks much more accurate, showing the steps as the watch, and separate it to walking and steps, distance is accurate and calories as well. but the app doesn't look so good and looks like it missed a lot of other option.
In addition, I don't understand why the Huawei app on the watch is not showing distance but just steps count.
So, which app do you use? I basically want a nice app that will show my daily usage and if can, that will sync with the heart rate measure that i can take from time to time.
Can I sync it to S-Health that I have? or please recommend for another app.
5. Is there any nice watch face that shows not only the steps count but the distance as well?
6. Any other general recommendations?
I think that's it for now
Thank you very much for your help.
Neo810 said:
Hi All,
2. Always on option - is there an option to make it sleep at night? like I like this option very much, but as I don't sleep with it, I think it is better that the screen will be off at night.
in addition, do it harm the screen if always on working all the time?
Thank you very much for your help.
Click to expand...
Click to collapse
Although the screen should not be harmed if always on is working all the time, at night you can use theater mode to turn your screen off without powering down the watch. The easiest method of going into theater mode is by quickly double pressing the button on the watch. You can also go into the pulldown menu from the main watchface and swipe over to theater mode to do the same thing. This can save some watch battery if you have the watch off the charger all night or if the battery is getting low during the day and you want to squeeze a few more hours out. It is meant for if you're in the movies and don't want the light from the watch screen to distract you or others from the movie. To exit theater mode and turn the screen back on, just single press the button on the watch.
Btw your post may be removed since we aren't supposed to post questions here in the general forum. There is a Q&A forum however where any questions can be asked about the Huawei watch. http://forum.xda-developers.com/huawei-watch/general/notice-post-questions-t3367506/page1
Enjoy your watch!
Neo810 said:
3. Reset - do you reset the devise occasionally? like in purpose. I mean, on my Samsung S6 i know that once in a while I need to reset it to get a better performance.
Click to expand...
Click to collapse
From my experience, it is ok to factory reset your device once every two months or when you feel it has become quite sluggish although you mustn't expect the performance results to be visible right away after the reset. After the reset, all the applications from your phone will be resynced and the Google Play Services will begin to re-download its updates thus resulting in bad battery life and perfomance for that day until it settles down.
Great.
Thanks for helping.
I always charge the watch to 100% and wait until it goes below 10% to charge it.
When I take the watch off my hand I also shut it down and power it on again when I put it on. This gives me about 3 days of using the watch without charging.
Neo810 said:
2. Always on option - is there an option to make it sleep at night? like I like this option very much, but as I don't sleep with it, I think it is better that the screen will be off at night.
in addition, do it harm the screen if always on working all the time?
Click to expand...
Click to collapse
If you put your watch on a desk the display will completely turn off after about 10 minutes, even if you chose always on.
If there is no movement detected for a certain period of time, the display will switch off. This can sometimes also happen if you are in a very steady position. My watch turns occasionally off while I'm playing Playstation and holding the controller in the same position.
foo said:
If you put your watch on a desk the display will completely turn off after about 10 minutes, even if you chose always on.
If there is no movement detected for a certain period of time, the display will switch off. This can sometimes also happen if you are in a very steady position. My watch turns occasionally off while I'm playing Playstation and holding the controller in the same position.
Click to expand...
Click to collapse
I noticed that but as inconsistent.
Sometimes it did it exactly as you describe and sometime not. left it on the desk, half an hour and still always on worked.
I don't know the exact algorithm behind it, but I'm pretty confident that the display will switch off sooner or later. I always put my watch on my desk at night and every morning the display is pitch black.
Related
thanks
1. Turn off ambient mode
2. Set brightness to 1
3. Limit screen on time by disabling notifications on apps you don't really need to view from the watch, and always covering the display to turn off manually when you are done looking at it.
tcollum said:
1. Turn off ambient mode
2. Set brightness to 1
3. Limit screen on time by disabling notifications on apps you don't really need to view from the watch, and always covering the display to turn off manually when you are done looking at it.
Click to expand...
Click to collapse
thanks!
Also, if you leave it in its charger, and don't use it, it's battery will stay at 100%.
Use a watch face that doesn't have a second hand.
Sent from my HTC6525LVW using Tapatalk
1. Don't use a watch face that didn't come from motorola pre installed. Wait for google to open it up to developers. Right now the way the watch faces work is through apps and that uses more battery.
2. Ambient off
3. Turn off any crazy notifications you get on your phone that you dont care about like twitter
Alcoholic said:
1. Don't use a watch face that didn't come from motorola pre installed. Wait for google to open it up to developers. Right now the way the watch faces work is through apps and that uses more battery.
2. Ambient off
3. Turn off any crazy notifications you get on your phone that you dont care about like twitter
Click to expand...
Click to collapse
Actually getting a 3rd party watch face that doesn't have a second hand or animation helps battery life a lot.
Sent from my HTC6525LVW using Tapatalk
ChrisNee1988 said:
Actually getting a 3rd party watch face that doesn't have a second hand or animation helps battery life a lot.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I concur! Installed custom watch with no "seconds hand", ambient mode is ON, 8am to 10pm drains to 30-35%! Standard Minimal watch face with the same options = 10% at the end of day.
http://forum.xda-developers.com/moto-360/general/moto-360-2-day-battery-test-graphs-t2880565/page2
Post #13
Has anyone tried Wear Battery Saver app?
http://tinyurl.com/lkua8dk
Alcoholic said:
1. Don't use a watch face that didn't come from motorola pre installed. Wait for google to open it up to developers. Right now the way the watch faces work is through apps and that uses more battery.
2. Ambient off
3. Turn off any crazy notifications you get on your phone that you dont care about like twitter
Click to expand...
Click to collapse
Actually the notification I care more about it is Twitter.?
kandelai said:
Has anyone tried Wear Battery Saver app?
http://tinyurl.com/lkua8dk
Click to expand...
Click to collapse
haven't tried it...doesnt seem too convincing to me.
Try downloading mini wear launcher. If you swipe left to right twice you can dim the screen to super dim. I use it when i'm in the office so i dont have a super bright screen for no reason.
The only thing that's made a noticeable difference for me has been turning off ambient mode. For the last week I've been wearing the watch for about 17 hours / day. At the end of the day I usually have 25 - 40% left in the tank. Today I decided to try it with ambient mode on. I'm 10 hours in and I'm already at 38%. So it makes a big difference to me. That's still not bad since I'm averaging 6% / hour so I could potentially make it last my normal 17 hours. But it's a bit too close.
Also, I know I can drop it on the charger for 10 minutes and I'll pick up another 10 - 15% or 2 hours of ambient or 3 - 4 of non-ambient time.
memekmek said:
haven't tried it...doesnt seem too convincing to me.
Try downloading mini wear launcher. If you swipe left to right twice you can dim the screen to super dim. I use it when i'm in the office so i dont have a super bright screen for no reason.
Click to expand...
Click to collapse
I've tried that super dim mode. It seems to be pretty good indoors, but I can't see ANYTHING outside. I wish the auto-brightness was able to use it though so I don't have to manually switch it.
With ambient off, how accurate the watch screen will wake up when you bring your wrist up see the screen?
Stop using your watch like a phone
Can you tell us what watchface from 3rd party you use that doesn't have second end
Thx.
hardtheory said:
Can you tell us what watchface from 3rd party you use that doesn't have second end
Click to expand...
Click to collapse
If you are using facer, here are a few hundred to choose from: http://facerepo.com/app/
PsychDrummer said:
I've tried that super dim mode. It seems to be pretty good indoors, but I can't see ANYTHING outside. I wish the auto-brightness was able to use it though so I don't have to manually switch it.
Click to expand...
Click to collapse
Autobrightness does use the super dim mode for me. If I'm indoors and there's not a lot of lighting changing the brightness to 1 will usually make my screen brighter.
Even if you use a face with a second hand in facer, just delete the second hand layer and all is good
http://www.reddit.com/r/moto360/comments/2la6cg/noticed_i_can_get_my_moto_360_to_last_24_days/
A rudamentary discussion is over at the link above about an idea a couple of us have. The short of it is that with the ability to build profiles from an app on your phone, you could disable notifications/bluetooth (on the phone)/ ambient/ etc and that has been shown to dramatically improve battery life ( up to 3 days ). I'm curious if a developer with a Wear device would entertain the idea of putting something like this together. I would be happy to pay for an application that could make these types of adjustments through definable profiles, and I suspect many others would as well.
Thoughts? Suggestions?
Quick update. Battery life on the watch is improved by ~40% in a controlled test by disabling bluetooth on the paired phone. More details on the thread at Reddit.
Wtf is the point of disabling Bluetooth on the phone? The watch can't do what it's supposed to do then?
Sent from my HTC One using Tapatalk
I don't think that can be accurate. I've found that my watch has much worse battery life when not paired, as it is constantly searching for a bluetooth device to pair with... Maybe they mean airplane mode. But if that's the case, the watch is barely more featured than any normal old watch....
As discussed in the thread @ Reddit, the idea is that we're often in a situation where you don't need the watch. If I'm sitting at my desk, I have Chrome open, have my phone in front of me on a dock, etc. Using the watch is cumbersome if I already have my hands on a keyboard and mouse. Therefore, draining 7-12% per hour is a waste. If you consider that many of us are in a position for 6-8 hours a day where the watch will not be used, and the lifespan of the watch is anywhere from 12-18 hours, than turning off bluetooth can mean your watch may last longer than 24 hours and be more effective when you do require it.
This may not apply to you. But it will for many.
As for its effectiveness, I've done it two days in a row now. Using Wear Battery Stats, the results are consistently 40%+ reduction in battery discharge.
so what would be the conditions for matching the profile? meetings? GPS location? times of day?
also, you'd have to have an app present on the watch itself to make this functional, which would limit you to solely duration of time. so technically you'd be limited to the appointments on your calendar - but if you're in airplane mode, is this even possible?
i think the phone could issue a command to the watch to go to airplane mode, but how to get it back out is a bit more complicated. time is the only factor that i can think of. if you move locations, leave your desk, etc., you'd have to manually set it out of airplane, which is not something that interests me.
i'm still waiting for the ability to turn off teh motion sensor.
I just did a logical cheap DIY. (it does not put a stress in the battery)
I put my charger dock to my TIMER wall plug.
I wake up everyday at 05:45. When I go to sleep I have about 25% battery life, I put the watch on my dock and do not charge it.
At 04:00 my wall charger turns automatically ON and starts charging my watch, When I wake up it's 100% . Moto 360 did NOT charge all night, and it goes from about 10% - 20% (witch is almost best ) to 100%.
cvenk said:
I just did a logical cheap DIY. (it does not put a stress in the battery)
I put my charger dock to my TIMER wall plug.
I wake up everyday at 05:45. When I go to sleep I have about 25% battery life, I put the watch on my dock and do not charge it.
At 04:00 my wall charger turns automatically ON and starts charging my watch, When I wake up it's 100% . Moto 360 did NOT charge all night, and it goes from about 10% - 20% (witch is almost best ) to 100%.
Click to expand...
Click to collapse
1. not sure how this relates to the OP.
2. isn't the battery "sweet spot" 80-40%? theoretically reducing the battery to 10% puts more wear on the battery than charging overnight? what if you switched your timer to charge first, then disable?
Yes. What I'm envisioning at bare minimum would be:
- An application on the smart watch that can disable bluetooth locally. That way you can keep it on the phone for your car stereo, headphone, etc features. This could be used through Google Voice (Tap screen and say "Open Sleep Now" or whatever). Also have the ability to open from any standard launcher such as "Wear Mini Launcher" or a Swipe command so you can quickly enable it when you sit down at your desk.
- The application on the smart watch includes the ability to force dim the screen or show a black screen like Slumber until you press/hold the button or press the screen to wake it.
- The application on the smart watch would have a feature to keep bluetooth turned off/screen turned off until the watch detects feedback from the accelerometer that there is significant and consistent movement over X period of time. This would help some people configure it not to go off while at their desk but while walking around the office/home/etc.
A more advanced version could offer additional features from the smartphone such as location awareness based on Wifi/GPS, but my understanding is that such a feature would burn through the smartphone battery. If not, then the ability to disable bluetooth on the smartphone based on location or detection of wifi APs would be another way to approach this. However, I believe that many people would find the first few feature recommendations above beneficial enough.
i hadn't considered the accelerometer but i think it will be tricky to get it right. i feel like the watch would be turning off/on the BT a LOT. sorry to sound so pessimistic - i think some test cases are warranted here.
your last point i just don't see feasible given the limitations of the watch. sacrifice the phone battery for the watch battery doesn't sound like an ideal situation and I'm not convinced it would be effective at reducing battery usage on the watch either.
640k said:
i hadn't considered the accelerometer but i think it will be tricky to get it right. i feel like the watch would be turning off/on the BT a LOT. sorry to sound so pessimistic - i think some test cases are warranted here.
your last point i just don't see feasible given the limitations of the watch. sacrifice the phone battery for the watch battery doesn't sound like an ideal situation and I'm not convinced it would be effective at reducing battery usage on the watch either.
Click to expand...
Click to collapse
Agreed. Again, at bare minimum, if I had a bluetooth/wireless toggle switch on the smartwatch, that would be a huge benefit. I could turn it off while driving and sitting at my desk.
Also, as discussed on reddit, it does not only apply to bluetooth on and off. With profiles, you can turn off HR monitor, step counter, etc when you're seated at the office and just turn it back on when you leave. It can also be scheduled (if you leave office at 5pm, start the profile that enables most services by 4:30pm).
For me, the 8 hours a day that I work, I don't need email or social apps notifying me on my watch since I have a computer in front of me the whole time. I also don't need the HR triggering every so often. At the bare minimum, I just need calendar reminders and SMS via hangouts. If there is a way to set "Office" profile scheduled every 9am to 5pm then revert back to the default profile outside of those times, it would be great.
I found it very hard to find information from people who actually have the update in other threads because it is mixed with information on how to actually obtain and install the update.
So what are your impressions of tge 5.1.1 update ? Please only post if you have the update installed and running for at least few hours.
My impressions:
- Battery life is worse, like 30% worse with Wi-Fi detection on, even if mostly using Bluetooth.
- Still can't edit the canned response list Emoji drawing is a bad joke.
- I can't dismiss notifications with flick gestures (only hide them)
- Very smooth and responsive UI overall
- No annoying "Ok Google" text on watch face until you say "ok Google" 5 times
Battery life for me for 5 times better.... One thing, this enables 'always on' apps... I would check some of your apps and see what battery consumption is. I've been in my watch since about 10am and I have 53% left right now. Way better than anything I have ever gotten. This is with wifi on.
It's pretty fantastic for me. I have no complaints. The processor is old, but I'm very impressed with how optimized they've made it. The lag just doesn't interrupt my work flow, unlike with the Apple Watch at least. There's no major delay. Will likely be buying V2 or V3 depending on how I feel the life cycle for these devices will be.
Updated yesterday. I feel like the battery lasts less, but you have to give it 2-3 days to settle down. Liking the new features, but I don't think I'm gonna use Wi-Fi too much since it drains battery.
For now, I'm keeping WiFi, gestures, and ambient mode off. This way within a week I'll have a true comparison of battery life. Then I'm going to test each function and how it effects battery. I'll let everyone know how it goes.
Have the update one day now,
Good points:
-Smootness
-less buggy
-wifi when out of range
-wrist flick(great idea)
-Google maps maps
Bad points:
-Wrist flick is hard to perform correct (think it is a learning curve)
-When wifi is active on whatch and is connected but phone isn't connected to internet it still says it is connected.
-Laggier in first minutes after boot
-Lock screen sometimes activates when on wrist.
Overall i'am happy. Batterylife is to early to judge
I got the update yesterday after resetting my device. The first thing that I have noticed is that I can no longer dismiss notifications that only take up the bottom part of the screen. I have to pull the notification up and can then dismiss it. If this is what the developers intended, then that it is a major step backwards.
Also where do I setup which apps should stay "always on"?
Battery life after the update is disasterous, about 6% per hour but I need to give it a few days to sort itself out.
The dismissing of notifications is very much hit and miss and is impracticable.
At the moment I am not impressed with the update. Hopefully things will sort themselves out over the next few days.
For me, the update has been surprisingly good.
Good:
- Battery life (which I must admit, was my primary concern) is as good as it was prior to the update, even with the watch connected to WiFi.
- I love the flicking gestures, they work exactly as I imagined they would, although they're not as smart as they should (you can swipe available cards up and down, but when a card has multiple sub-cards, you can't scroll between them).
- Performance is great, specially considering it's a device with 512MB RAM, UI is still responsive enough and with very little lag.
- I love the new contact screen, it saves me a lot of time for quick calls when I can't remember the contact name (I normally use Google Now to call someone).
Bad:
- For the life of me, I haven't figured out how to enable always-on apps. It's one of the features I've been waiting for so eagerly, specially for Google Keep's checked notes (which I use A LOT).
- The WiFi connection is USELESS if you leave your phone home and find a protected WiFi network, because you NEED the phone to input the password. It kinda defeats the whole purpose.
One thing I noticed after the update is all of my hangouts threads became unmerged. Now each person has SMS/Hangouts as seperate threads. My one buddy experienced the same issue when his watch updated. Not sure why the software update would cause that, but it's upsetting.
Overall, I'm really liking the update. The only thing that's really bugging me is that you can't seem to dismiss notifications unless they're open. I'm used to being able to dismiss them immediately if I can get all the information I need from their title. Now, I actually have to swipe up first to open them, and only then can I dismiss them. It's not so bad that I can't live with it, but it is annoying.
The update has exceeded my expectations so far. I have only had it installed for about 12 hours. Battery life seems better. Worst case I don't think it has gotten any worse which was a huge concern because it hasn't been so wonderful. It seems to give more feedback and explanations so I'm not guessing as much. For example when I added a playlist it informed me that the battery needed more charge to download to the watch. Prior to the update I would have been scratching my head all day and then it would magically download when I charged up at night.
I really hope the WiFi works as advertised. I can think of many ways it could be useful to me. It seems like there are lots of times when I want notifications in case of an emergency because I'm a single dad but I also don't want to carry the phone with me.
My biggest annoyance with update is that now I have to open cards before they can be swiped away. Most times I can tell what a card is telling me and used to swipe them away without opening them.
Seems more responsive.
As others have said, removal of swiping / dismissing the previews was not a good call.
Not entirely sure, but looks like I won't be able to connect to my work WiFi which uses certificate based EAP-TLS authentication ? Will see when I'm back in the office next week.
Sent from my Lollipop TF700T
Do the other watches have the same issue (yeah, I'm calling it an issue instead of a feature) with the notification swiping? Or maybe this is something Motorola did thinking they were compensating somehow for the flat tire? Regardless, I hope there's an update to fix it, it just annoys the piss out of me every time.
My first day battery report.
Off charger at 9am, end of the day (11pm) 67%. This is with WiFi and ambient mode off so I can have a direct comparison to prior then update. But to me that is a huge improvement.
Has anybody figured out how to enable the App Always On feature?
I've updated my watch yesterday and wanted to let my watch get to 0% to calibrate the battery because of the new update. so I didn't put my watch off at night, and the next morging (today) my watch was 10% and the screen was totally black and it wasn't responding to the side button so I tried to hold it for 30 seconds to let it restart I saw the normal bootupscren but as soon it was staring the app it became black again. I now have let it charge to 100% and it it's responding perfectly again. Does anyone know what was wrong?
Thanks for your time!
user of android said:
I've updated my watch yesterday and wanted to let my watch get to 0% to calibrate the battery because of the new update. so I didn't put my watch off at night, and the next morging (today) my watch was 10% and the screen was totally black and it wasn't responding to the side button so I tried to hold it for 30 seconds to let it restart I saw the normal bootupscren but as soon it was staring the app it became black again. I now have let it charge to 100% and it it's responding perfectly again. Does anyone know what was wrong?
Thanks for your time!
Click to expand...
Click to collapse
I noticed the same behavior when mine was at 2%. It did not respond to screen touches and only switched on for about half a second after clicking the side button several (5 or more) times. It still took about 30 minutes for the watch to finally shut down. Maybe this is because of a very aggressive battery saving mode?
I must add that I did reset the watch after the 5.1.1 update was fully installed and wanted the battery to drain completely for the same reason you did: to recalibrate it.
Sent from my One S using XDA Free mobile app
Mister-B said:
Has anybody figured out how to enable the App Always On feature?
Click to expand...
Click to collapse
I'm thinking it may only be an AMOLED feature.
Mine had the same issue at 10%. I wonder if this is related to the performance issue Motorola was talking about.
I don't know if I am happy or sad that this is widespread. Hopefully they patch this up.
So I found this one app " Swipify" that lets me keep the watch face on full time. I like it but it drains the battery a bit faster then I would like. Also when charging the watch the round charge progress bar does not advance so I have no idea how charged it is until I take it off the dock. So I un-installed it. I am looking for an app that will let me keep the watch in the dimmed "Ambient mode" full time and then when I lift the watch to look at it, have it to the full watch face mode until I set my arm back down.
Anyone make such a add-on app by chance? :fingers-crossed:
Or should I start learning how to code apps?
Any chance they (moto) will update with such features?
Thanks,
-DK
I'm not sure if such an app exists, but I'm just about 100% sure that Motorola will never add this feature. The current 5.1.1 software version was significantly delayed because they were trying to optimize battery life. I think it's a combination of a small battery and an old, power hungry processor that is the main problem.
I find that since upgrading to 5.1.1 I can go the entire day on one charge in ambient mode but I have to leave the watch sitting flat in order to test it. But by the end of the day I still have 25-25% charge left with it running the entire day in Ambient mode as long as I do not get to many notifications during the day which of course I can control those with no problem.
SirDigitalKnight said:
I find that since upgrading to 5.1.1 I can go the entire day on one charge in ambient mode but I have to leave the watch sitting flat in order to test it. But by the end of the day I still have 25-25% charge left with it running the entire day in Ambient mode as long as I do not get to many notifications during the day which of course I can control those with no problem.
Click to expand...
Click to collapse
Huh? What's the point of having a watch if the only way you can get it to work is to lie it on the desk and not touch it, oh and to disable notifications, aka the only thing that makes the "watch" something more than juts a watch?
closer reading...
thebobmannh said:
Huh? What's the point of having a watch if the only way you can get it to work is to lie it on the desk and not touch it, oh and to disable notifications, aka the only thing that makes the "watch" something more than juts a watch?
Click to expand...
Click to collapse
That is why I am looking for an App similar to Swipify to keep the ambient mode on full time. And I only let it lie flat for a day to test the battery life and it makes it through the day with the screen on full time in ambient mode. So I know the watch is capable of doing what I would want it to use it for.
And I said "as long as I don't get too many notifications", I never said I disabled notifications. I still have those on.
SirDigitalKnight said:
That is why I am looking for an App similar to Swipify to keep the ambient mode on full time. And I only let it lie flat for a day to test the battery life and it makes it through the day with the screen on full time in ambient mode. So I know the watch is capable of doing what I would want it to use it for.
And I said "as long as I don't get too many notifications", I never said I disabled notifications. I still have those on.
Click to expand...
Click to collapse
Gocha. No need to be defensive, sorry for the misunderstanding.
Still seems like you'd always be on the hairy edge of running out of battery in a real-world scenario. Hell, I'm ambient mode off but tilt-to-wake on, and some long days I barely make it to the end of the day. Never had luck with even the fake ambient mode the Moto provides.
thebobmannh said:
Gocha. No need to be defensive, sorry for the misunderstanding.
Still seems like you'd always be on the hairy edge of running out of battery in a real-world scenario. Hell, I'm ambient mode off but tilt-to-wake on, and some long days I barely make it to the end of the day. Never had luck with even the fake ambient mode the Moto provides.
Click to expand...
Click to collapse
All good, sorry to come off as defensive. :good::highfive:
Been using it with tilt-to-wake turned off and I am finding that by the end of the day I still have plenty of juice left.
With Ambient on and tilt-to wake off I find I have about 35-40% left at the end of a 7am - 11pm day. That is with receiving some email and text notifications (maybe 15-20) during the day.
I know everyone has different uses and ideas of how to use their Moto 360 so everyone's setting are going to be different, but what I am after is a always on "dimmed" or "ambient" mode with the option to turn on tilt to wake so I could test the battery life both ways. I would also like to use my 360 for home automation control and I I know with "Autowear" it is possible but from the little testing I have done so far it would kill my battery way to fast so perhaps on a future SW that will be something I will be doing.
Pausing and starting Netflix or HBOgo or Plex from my 360 is working pretty good for me as a start.
Think I will try and contact the owner of the Swipify app and see what he can do for me...... :laugh:
With the latest update LCA44B, when ambient is on and tilt is off, the screen will stay on all the time. However with ambient on and tilt on, it is same as previous behavior, screen will turn off when you put your arm by your side.
pustefix said:
With the latest update LCA44B, when ambient is on and tilt is off, the screen will stay on all the time. However with ambient on and tilt on, it is same as previous behavior, screen will turn off when you put your arm by your side.
Click to expand...
Click to collapse
That is very good news! Can not wait to try it out!
Anybody noticed the little green light on the back of the watch staying on, even when you take it off and pop it in charger?
Tried changing from frequent to never in settings but stayed on.
The only way I got it off was switching off the watch?
well, mine doesnt have green light on, it is on only when measuring heart rate, and even measuring, the green light will only keep blinking rapidly. So i couldn't find a moment where the green light would stay on, like your situation..
EDIT: I think this may be your problem. On your watch, go to Samsung Health app, scroll a little bit down, and click on the Heart Rate, on the right side, you will see 3 vertical dots, click on it. Then, click on the "Gear" icon to go to Heart Rate Settings. Change it to Frequent or Never.
I think you may had the Heart Rate Monitor set to Always measure, which is why the green light keep lighting up as it was measuring your heart rate every second.
DrViruser said:
well, mine doesnt have green light on, it is on only when measuring heart rate, and even measuring, the green light will only keep blinking rapidly. So i couldn't find a moment where the green light would stay on, like your situation..
EDIT: I think this may be your problem. On your watch, go to Samsung Health app, scroll a little bit down, and click on the Heart Rate, on the right side, you will see 3 vertical dots, click on it. Then, click on the "Gear" icon to go to Heart Rate Settings. Change it to Frequent or Never.
I think you may had the Heart Rate Monitor set to Always measure, which is why the green light keep lighting up as it was measuring your heart rate every second.
Click to expand...
Click to collapse
No, as I said - Tried changing from frequent to never in settings but stayed on. Never used always since new.
One correction though, when I say it stays on, I meant it stays on flickering fast as if it's taking a reading.... it's just not on my wrist and won't stop flickering
sorry, I missed out your statement. It could be other apps installed is using your heart rate sensor.. or even watch faces. does resetting your watch to factory help? I guess that is the last resort
Just tried the reset I read about in another thread (after I backed up of course)
Not easy holding down power then multi pressing, pressing the back key to select reset from miniscule letter choices.
Anyway it seemed to reset, but not sure if it was the right one!
Didn't realise Samsung pay loses all your cards even with backup and restore. Today's steps also gone, all it 'knows' is my target
I'll report back if it works.
I am having the same issue and I have it set to never. I know it turns on for sleep monitoring but it seems to be on all night. I wonder if the last update messed with it.
I have this problem too after updating to the latest tizen 4.0.0.1 , mine is 42mm.
Whenever the HRM breaks, the altimeter and barometer breaks too.
Reset from settings menu or doing hard reset with button will not fix this issue, but sometimes it fixed itself without me doing anything.
Only god knows what happen with this "perfect" tizen.
I tried a factory reset that didn't help at all. I then went into Best Buy and got a replacement watch because I have the protection plan and the watch did the same thing last night. I'm beginning to think it may be a glitch in the S Health app and not the watch
I think I figured out the issue for me. I noticed that in S Health on the watch, if you have REM sleep monitoring turned on the HRM has to be on too . There is actually a message to that effect on that setting. Sure enough, turned off REM sleep setting last night, no green light all night long.
Further update, if I turn off the REM sleep feature, it records me as restless all night - - no recorded sleep time
Faye Reagan said:
I have this problem too after updating to the latest tizen 4.0.0.1 , mine is 42mm.
Whenever the HRM breaks, the altimeter and barometer breaks too.
Reset from settings menu or doing hard reset with button will not fix this issue, but sometimes it fixed itself without me doing anything.
Only god knows what happen with this "perfect" tizen.
Click to expand...
Click to collapse
i am not experiencing issue with HRM but with having huge issues with altimeter - when running for an hour i am getting -500m or so indications. seems watch does not like sweat and humidity
masi0 said:
i am not experiencing issue with HRM but with having huge issues with altimeter - when running for an hour i am getting -500m or so indications. seems watch does not like sweat and humidity
Click to expand...
Click to collapse
I got mine RMAed, got the whole motherboard replaced and every single sensor works well with tizen 4.0.0.1 (for now) :highfive:
really? wow. are you running by any chance and you can share screen from s-health with altitude data?