So, got a problem with my m8
my m8 is the international unlocked version from amazon, 2 months old.
no root, no s-off, just stock with the last update from htc (4.4.3 i think)
last night, went to sleep, and charge my phone with 20% battery, then this morning when i woke up, the phone was in this screen:
replace the .
h.ttp://i.imgur.com/yYoTilH.jpg
Tried to reboot but with no luck, at the same menu i entered to hboot and some lines with "not found" (like 4-5 files) appeared on the screen, then in the new menu, i tried to enter the recovery menu, no luck and went back to fastboot menu, factory reset, no luck too.
After trying all of the menu options with no luck, i tried to use the fastboot to flash an stock image of the recovery, but always getting a signature verification failed.
Tried to flash the stock roms from here, but also the same error (signature verification failed)
So, if someone knows something to help me, please do
You cannot flash anything if boot loader is locked or you don't have s-off
Open on your pc where adb and fastboot files are a command window when the phone is connected to pc and type on fastboot erase cache...see if something happens and if it worked reboot it
One-M8-Master said:
You cannot flash anything if boot loader is locked or you don't have s-off
Open on your pc where adb and fastboot files are a command window when the phone is connected to pc and type on fastboot erase cache...see if something happens and if it worked reboot it
Click to expand...
Click to collapse
Code:
erasing 'cache'...
OKAY [ 0.003s]
finished. total time: 0.003s
worked (i think), but after reboot, stuck at fastboot again
guess ill have to take it to technical service
Hey guys !
So since i messed up with the recovery mode, i'm stucked in the fastboot with no Download mode (recovery doesnt work neither).
So after searching 3 days in the internet i found the acces to fast through adb by puting a new laf.img in order to restore the download mode and flash a stock firmware !
My problem is that when i try to enter the command on the cmd, i get severals errors, take a look :
Code:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb devices
adb server is out of date. killing...
* daemon started successfully *
List of devices attached
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
error: device not found
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot erase laf
erasing 'laf'...
FAILED (remote: failed to erase partition
)
finished. total time: 5.034s
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash laf laf.img
target reported max download size of 2147483648 bytes
sending 'laf' (18432 KB)...
OKAY [ 0.581s]
writing 'laf'...
FAILED (remote: flash write failure)
finished. total time: 5.615s
Also command : "fastboot boot laf.img" result to "Failed(remote: dtb not found) instead of flash write failure..
Of course i have my G3 855 32GB in download mode (but it goes into fastmode), so when i try a command, lines are added in the screen etc..
Does that mean that my laf.img don't work? I assumed that so i try several, but does it have to be the exact same one as the one who was in my phone before( v20a if i record correctly ) or could it be from any 855 32GB version ?
I also thought it could be a recognition problem as when i type "adb devices" or "adb shell" nothing is found..
If someone has any clue or a link to some guide i'll be more than joyful, thanks in advance !
Try adb fastboot when writing command hope it helps
Anik49 said:
Try adb fastboot when writing command hope it helps
Click to expand...
Click to collapse
Hey thank you so much for answering !
What do you mean by that, i already download the adb/fastboot driver and launch a cmd in the directory they are at, writing "adb fastboot" has no result neither, can you be more specific please ?
cm13 recently messed up my phone in exactly the same way, no recovery and download mode would jump straght to fastboot. I followed this guide to the letter and am now back running again: http://open-freax.fr/guide-unbrick-your-lg-g3/
BigsyBiggins said:
cm13 recently messed up my phone in exactly the same way, no recovery and download mode would jump straght to fastboot. I followed this guide to the letter and am now back running again:
Click to expand...
Click to collapse
Well i hope my problem can be solved in a safer way, i dont like much to go on the hardware part, so I'll use it as my last hope, but thanks
Altought i think my device is recognized by fastboot in someway because it responds when i type commands in fastboot, and also when i reboot it.
But i'm getting this error :
Code:
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
in the screen of my phone. Does that stand for Cyanogen mode which i was trying to put on my phone ?
I mean when you enter command in cmd use adb before any command also use cmd which one available on android sdk folder....also you can use this method if adb not workinhg properly http://forum.xda-developers.com/lg-g...-9008-t3072091
BigsyBiggins said:
cm13 recently messed up my phone in exactly the same way, no recovery and download mode would jump straght to fastboot. I followed this guide to the letter and am now back running again: http://open-freax.fr/guide-unbrick-your-lg-g3/
Click to expand...
Click to collapse
Like @BigsyBiggins said, this is the guide which could fix your phone. HW Part is not too hard!
Anik49 said:
I mean when you enter command in cmd use adb before any command also use cmd which one available on android sdk folder....also you can use this method if adb not workinhg properly
Click to expand...
Click to collapse
Oh ok ! Also your link is not working :s
I understand that the method can work but I think that the method i'm trying to use is really close to succeed, over my search on the internet, i saw lots of people who manage to succeed with it.
But i guess i must do something wrong. I downloaded the kdz file according to my IMEI.
Then I extracted the .dz file with LG Firmware Extract. Then I extracted the file named laf_393216.bin from the dz file. Changed his name into laf.img , put it into the fastboot directory.
Then i typed
Code:
fastboot format cache
fastboot erase laf
fastboot flash laf laf.img
in a cmd from the directory.
It all seemed to work, but then when i remove the battery and restart into download mode, it goes into fastboot after the download mode charging animation..
Also when i try to boot with fastboot boot laf.img i get the error (remote: dtb not found) on the cmd.
And ERROR: Unable to find suitable device tree for device(194/0x0001001/112/0) ERROR: getting device tree adress failed DTB offset is incorrect, kernel image does not have appended DTB)
Am I doing something wrong, should I changed more file than just laf ?
SisGG said:
Oh ok ! Also your link is not working :s
I understand that the method can work but I think that the method i'm trying to use is really close to succeed, over my search on the internet, i saw lots of people who manage to succeed with it.
But i guess i must do something wrong. I downloaded the kdz file according to my IMEI.
Then I extracted the .dz file with LG Firmware Extract. Then I extracted the file named laf_393216.bin from the dz file. Changed his name into laf.img , put it into the fastboot directory.
Then i typed
Code:
fastboot format cache
fastboot erase laf
fastboot flash laf laf.img
in a cmd from the directory.
It all seemed to work, but then when i remove the battery and restart into download mode, it goes into fastboot after the download mode charging animation..
Also when i try to boot with fastboot boot laf.img i get the error (remote: dtb not found) on the cmd.
And ERROR: Unable to find suitable device tree for device(194/0x0001001/112/0) ERROR: getting device tree adress failed DTB offset is incorrect, kernel image does not have appended DTB)
Am I doing something wrong, should I changed more file than just laf ?
Click to expand...
Click to collapse
I don´t know what exactly is the problem, maybe something with your win-driver, some crashed or drifted partitions or some broken files...
I just can repeat my advice: I was in the same situation with my phone after a failed cm13 update and i was trying and reading about 2 days how to solve it - after the above mentioned method, your phone would get out of this "coma".
Maybe somebody else here in this forum could help you with your mentioned method, sorry.
Ernesto0023 said:
I don´t know what exactly is the problem, maybe something with your win-driver, some crashed or drifted partitions or some broken files...
I just can repeat my advice: I was in the same situation with my phone after a failed cm13 update and i was trying and reading about 2 days how to solve it - after the above mentioned method, your phone would get out of this "coma".
Maybe somebody else here in this forum could help you with your mentioned method, sorry.
Click to expand...
Click to collapse
Well I think i'm still under warranty, so i dont wanna touch to much on the hardware.
So do you think, if i send it back without touching anything, saying i put it on charge one night and the next morning it was like this, the warranty could work?
If they found it's rooted or they understand you did something with your software your warrenty is void ?
SisGG said:
Well i hope my problem can be solved in a safer way, i dont like much to go on the hardware part, so I'll use it as my last hope, but thanks
Altought i think my device is recognized by fastboot in someway because it responds when i type commands in fastboot, and also when i reboot it.
But i'm getting this error :
Code:
error : command never completed
error : auto CMD12 error
error : command completed with errors
error : command timeout error
failed to send stop command
failed writing block @ 1
in the screen of my phone. Does that stand for Cyanogen mode which i was trying to put on my phone ?
Click to expand...
Click to collapse
Remove the battery, put it, press the volume + and connect to PC USB, if like entering download, what happens to us not to go, will leave the ****ing LoGo, Well, hold down the volume + and not let go, I think it is less for 2 minutes more. After a while, the computer tells us that something was connected, the phone will tell you who is in fastboot as I said before, if not let me fastboot flash boot files and the LAF, recovery ect, nothing happens, there is still a magic command.
fastboot boot laf.img
Keep it in the ****ing heart
miguexneox said:
Remove the battery, put it, press the volume + and connect to PC USB, if like entering download, what happens to us not to go, will leave the ****ing LoGo, Well, hold down the volume + and not let go, I think it is less for 2 minutes more. After a while, the computer tells us that something was connected, the phone will tell you who is in fastboot as I said before, if not let me fastboot flash boot files and the LAF, recovery ect, nothing happens, there is still a magic command.
fastboot boot laf.img
Keep it in the ****ing heart
Click to expand...
Click to collapse
I dont quite understand what u meant there :s
I already have acces on the fastboot, actually now, my phone goes instantly on fastboot whatever i do.. Though i cannot boot a laf.img downloaded and flashed .. :'(
SisGG said:
I dont quite understand what u meant there :s
I already have acces on the fastboot, actually now, my phone goes instantly on fastboot whatever i do.. Though i cannot boot a laf.img downloaded and flashed .. :'(
Click to expand...
Click to collapse
were u able to resolve this issue. I am in your shoes at the moment.
I have tried the qualcomm. The drivers doesnt seem to work for my phone .
I can't flash or the laf.img . the fastboot commands doesnt seem to work.
and I'm stuck in fastboot .
What can be done
datrmon said:
were u able to resolve this issue. I am in your shoes at the moment.
I have tried the qualcomm. The drivers doesnt seem to work for my phone .
I can't flash or the laf.img . the fastboot commands doesnt seem to work.
and I'm stuck in fastboot .
What can be done
Click to expand...
Click to collapse
You have several options:
- find your phone firmware, extract recovery.img and flash it back through fastboot(do exactly the same for the LAF partition to restore download mode)
- flash a custom recovery for your phone model, if it doesn't work try an older version of TWRP, also it can be that your phone is not d855 but d850 model, so try to flash a d850 custom recovery and see if it works(that was exactly my problem and why i got stuck in fastboot mode, because my phone is d850 model and in settings it says d855, so I flashed wrong TWRP)
Ghikya said:
You have several options:
- find your phone firmware, extract recovery.img and flash it back through fastboot(do exactly the same for the LAF partition to restore download mode)
- flash a custom recovery for your phone model, if it doesn't work try an older version of TWRP, also it can be that your phone is not d855 but d850 model, so try to flash a d850 custom recovery and see if it works(that was exactly my problem and why i got stuck in fastboot mode, because my phone is d850 model and in settings it says d855, so I flashed wrong TWRP)
Click to expand...
Click to collapse
Thanks for the response .
I am unable to flash files at all.
This is the error
D:\mfastboot-v2>fastboot flash laf laf.img
target max-download-size: 2048MB
sending 'laf' (18432 KB)...
OKAY [ 0.646s]
writing 'laf'...
FAILED (remote: flash write failure)
finished. total time: 5.726s
D:\mfastboot-v2>
datrmon said:
Thanks for the response .
I am unable to flash files at all.
This is the error
D:\mfastboot-v2>fastboot flash laf laf.img
target max-download-size: 2048MB
sending 'laf' (18432 KB)...
OKAY [ 0.646s]
writing 'laf'...
FAILED (remote: flash write failure)
finished. total time: 5.726s
D:\mfastboot-v2>
Click to expand...
Click to collapse
It seems that your phone's bootloader is locked, you can try to execute this command: "fastboot oem unlock", and then check state with "fastboot oem device-info". But some people says that it does nothing, so you can try and check for yourself.
You can also try to boot directly an image from fastboot for eaxmple:
Code:
fastboot boot laf.img
or
Code:
fastboot boot twrp.img
So if you could successfully boot a laf image you would be able to access download mode, and if you could boot a custom recowery then you could access ADB and to try to flash other partitions, or even flash a custom rom...
I flashed my redmi note 8 pro indian version with miflash, and downgraded to android 9 from 11 to install Ubuntu touch.
Ubports installer still didnt recognize my phone I am guessing cause it was Begoniain(india) as opposed to Begonia(Global) that is supported.
But my problem is I want to go back to Android, and I dont know how to go back, I didn't have any recovery tool installed before installing Ubuntu Touch, now Ubuntu is very buggy, and I can't seem to install TWRP. I have no other recovery tools installed, just fastboot. I guess I should hvae installed twrp before installing Ubuntu Touch. I want to know how I can go back to android or to any other supported custom rom.
Thank you.
whats wrong with fastboot?
Hey, thanks for replying. I followed the steps in this video
which is a very accurate video i found after searching for many videos.
basically he asked to download the right TRWP, then ADB platform tools, then the ADB driver found here
[OFFICIAL][TOOL][WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
15 seconds ADB Installer v1.4.3 ADB, Fastboot and Drivers What is this? This is All-in-One installer for 3 most needed PC tools for Android. No need to download big SDK for 3 small things. I originaly made it for my Kurdish friend AnGrY DuDe in...
forum.xda-developers.com
then using "fastboot flash recovery twrp.img" cmd command
this seemed to work for many people and everything went well. but I just can't boot to twrp it just takes me to the ubuntu touch screen and i log back in to UT
xiaomi:
Code:
fastboot flash recovery twrp.img
fastboot oem reboot-recovery
aIecxs said:
xiaomi:
Code:
fastboot flash recovery twrp.img
fastboot oem reboot-recovery
Click to expand...
Click to collapse
I get this message
FAILED (remote: 'unknown command')
fastboot: error: Command failed
more commands I tried
'fastboot flash boot' gives me this error
fastboot error android_product_out not set
and 'fastboot boot recovery' command gives me this error
fastboot error cannot load 'recovery' no such file or directory
another command 'adb reboot bootloader' gave me this
error no devices/emulators found
I recommend to read 'fastboot help'
'fastboot flash' cmd requires two arguments: target (partition name) and source (path to file on pc)
'fastboot boot' cmd requires one argument only: source (path to file on pc)
'no such file or directory' means there exist no such file or directory with name 'recovery'
(Note this command requires bootable flag on current slot or will silently fail)
'fastboot oem' commands are device specific hidden commands. 'fastboot oem reboot-recovery' does not work on my device, but you will find lot suggestions for this here in forum (I just copy-pasted of xiaomi forum)
'adb' commands generally can't work in fastboot mode (and 'adb reboot bootloader' is fastboot mode btw)
if 'fastboot oem reboot-recovery' is unknown command, you can use 'fastboot reboot' instead. press and keep holding volume up while the phone reboots, it will enter recovery mode.
now the phone is stuck at restarting
i tried this 'fastboot erase data"
FAILED (remote: Partition table doesn't exist)
i just want a way to reset the phone back to android or other custom rom
Partition table doesn't exist?? you must have done something stupid...
aIecxs said:
I recommend to read 'fastboot help'
'fastboot flash' cmd requires two arguments: target (partition name) and source (path to file on pc)
'fastboot boot' cmd requires one argument only: source (path to file on pc)
'no such file or directory' means there exist no such file or directory with name 'recovery'
(Note this command requires bootable flag on current slot or will silently fail)
'fastboot oem' commands are device specific hidden commands. 'fastboot oem reboot-recovery' does not work on my device, but you will find lot suggestions for this here in forum (I just copy-pasted of xiaomi forum)
'adb' commands generally can't work in fastboot mode (and 'adb reboot bootloader' is fastboot mode btw)
if 'fastboot oem reboot-recovery' is unknown command, you can use 'fastboot reboot' instead. press and keep holding volume up while the phone reboots, it will enter recovery mode.
Click to expand...
Click to collapse
thank you i will try it
aIecxs said:
Partition table doesn't exist?? you must have done something stupid...
Click to expand...
Click to collapse
yes i think so, i think i should've installed twrp before that was the mistake, but i'll have to format this somehow
Did you try flash by mi flash the rom that you used to downgrade?
yes this is the first thing i tried, the same procedure i used to downgrade to 9 with mi flash, but when i do that it flashses in just 1 second, and gives success message, i was like it can't be that fast, but that happens everytime, so i figured somethings wrong. I turn on my phone and it's not flashed, it boots to ubuntu touch, but now even that's not happening, now it just keeps restarting after xiomi unlcoked screen.
i want to install a custom rom that goes best with my phone, i dont really want andriod to be honest, but need to have something installed to boot atleast, and I dont really mind if the phone goes dead, so i am not worried about experimenting on it
pp1pkew said:
yes this is the first thing i tried, the same procedure i used to downgrade to 9 with mi flash, but when i do that it flashses in just 1 second, and gives success message, i was like it can't be that fast, but that happens everytime, so i figured somethings wrong. I turn on my phone and it's not flashed, it boots to ubuntu touch, but now even that's not happening, now it just keeps restarting after xiomi unlcoked screen.
Click to expand...
Click to collapse
Try flash by sp flash tool. Maybe your partitions got fked by flash Ubuntu.
pp1pkew said:
i tried this 'fastboot erase data"
FAILED (remote: Partition table doesn't exist)
Click to expand...
Click to collapse
aIecxs said:
Partition table doesn't exist?? you must have done something stupid...
Click to expand...
Click to collapse
I believe that error message is misleading. It should mean
FAILED (remote: 'No such partition.')
you probably meant 'userdata' partition. however, I do not recommend fastboot erase cmd.
you should be able to enter fastboot mode with Volume Down button. instead of flashing TWRP into recovery partition (where it belongs) you could cheat bootloader and flash TWRP into boot partition instead. this will boot into TWRP recovery without Volume Up Button.
Code:
fastboot flash boot twrp.img
once in TWRP you can format Data, flash boot partition and install TWRP recovery.
probably easiest way is, create backup of boot + recovery from TWRP backup menu. that will create two files, boot.emmc.win + recovery.emmc.win in TWRP/Backups/<serialno>/<date> directory. just create another directory TWRP/Backups/<serialno>/my_files and place your files in there (rename boot.img = boot.emmc.win and twrp.img = recovery.emmc.win) then restore 'my_files' backup from menu.
then you can install any ROM from TWRP via System Image. Note that's android device, you can only install android. even ubports Ubuntu touch is not linux, it is just some gui build on top of android kernel to give you linux-like feelings.