Related
Hey guys,
The power button on my phone stopped working this morning (without water damage). I'm preparing the phone to return to Samsung warranty, and in the process of reseting to stock and re-locking the OEM I noted that the phone does not respond to fastboot commands in the bootloader despite this working on the same system a week ago, no change in drivers or anything else. I installed PDAnet, still broken on Win 7 although I can reboot with adb.
I then tried this on OSX, again I can reboot with ADB, but the phone is unresponsive in fastboot.
I have three working hypotheses and I'm hoping someone can help me:
a) in some process of flashing my phone and being an uninformed n00b maybe I flashed something I shouldn't have or used some combination of partial fastboot flashes I shouldn't have. has this happened to anyone else?
b) whatever hardware damage knocked out the power button might have partially knocked out the bootloader
c) I just have really bad luck with driver set up and I just happened to mess up two different computer driver configurations but the phone is fine. to this end, I am setting up another Win 7 system fresh on a virtual drive as I'm typing, though I have little faith it will be different
update: fastboot commands didn't work on the other windows 7 virtual system, although adb reboot bootloader did
freaking a this is annoying.
i have a fully stock ROM and radio, anybody to know how to flash a new recovery image and lock the bootloader without accessing fastboot? Just have to get this ready to go back to Samsung so they can fix their own hardware mess ups.
they are 2 different drivers.
As much as I don't like using/recommending the Galaxy Nexus Toolkit (only because I feel it's better to actually learn everything you're doing), it's the easiest way I've found to get the Fastboot drivers installed.
http://forum.xda-developers.com/showthread.php?t=1392310
Thanks guys for your comments.
I've tried Android SDK drivers, PDANet, Universal Naked Driver, and now the one click toolkit mentioned above, some on three different operating systems (Win 7, Win 8, OSx) on 32 and 64 bit.
The wierdest part is that under device manager, no device shows up when the phone is in fastboot, no is there any noise or any recognition of the device being connected at all. It is completely, 100% silent. (again, ADB works when the phone is booted).
I recognize that this may not be possible, but does anyone know how to flash a recovery image without being in the bootloader mode?
If fastboot isnt working like it should, and you are sure it isnt user error, then take it for warranty.
Sent from my i9250
yeah fastboot + the power button (which was defunk in clockwork mod) are back online again, dunno for how long. agreed seems like a hardware/warranty issue.
Recoveries can be flashed with ROM Manager assuming you have SuperUser permissions, but otherwise you or the toolkit need fastboot working.
Sent from my Galaxy Nexus using xda app-developers app
Hello everybody,
I have AICP rom on my phone (a pretty old version, kitkat4.0 and aicp ver.20140419 , installed around 12/05/2014 ish), xmister kernel and philz touch recovery6.19.3.
Everithing worked pretty good for some months, but few days ago the rom's GUI crashed and started saying that there is a gui error, then the gui restarts. This loop makes the phone impossible to use (the gui restarts every second). The recovery works, but i don't have the rom.zip on my sd card (only in my pc. the same for the nandroid).
I was thinking about adb push (i already had to use it in the past), but adb doesn't recognise the phone, while fastboot does recognise it.
how can i solve this little problem?
Thanks!
do you think that if i try to install a RUU i could damage my phone? can that be done without adb working?
Ok, i managed to have a working phone right now. The problem is that when i connect the phone to the pc, nothing happens. I already updated htcsync, i have java, sdk, and all the stuff installed and working. How can i make everything work again?
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
railpressureflip said:
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=3485186
Having the exact same Problems with my OP3 running everything stock 3.2.7 expect for the fact the device is unlocked...
Would love to hear how the problem can be solved!
ELoTRIX said:
http://forum.xda-developers.com/showthread.php?t=3485186
Click to expand...
Click to collapse
Hmmm Windows 7.
I can most certainly try that but the real question now is; how the hell did it work previously on my Windows 10 machine and refuses to work now? But at least I have a solution to try out, in the mean time! Thanks!
railpressureflip said:
Okay so now that I've scanned pretty much all of what the internet has to offer on this issue, I'm helpless and forced to write a new thread here about this.
Yes, a similar question has been replied to a million times before, but absolutely none of that helped, made no difference whatsoever.
So earlier, I was on the stock rom, with TWRP flashed and root access. But wanted to switch to the community build. Tried the twrp trick to install the CB but that didn't work, so flashed the stock OP3 rom and flashed community build.
All went fine, until I tried flashing back TWRP. Used the traditional ADB method of doing that, seemed to have flashed it but tried going into recovery only to be presented with a black screen. I got fed up of that trying to fix it for a whole day so I just left it, because I could still boot into the OS and that worked fine.
Fast forward to about a week later; somehow the flash didn't work and I still have stock recovery. Now I try flashing TWRP again, but I discover that my device doesn't get detected in fastboot. It absolutely refuses to.
It DOES, however, gets detected in the OS just fine.
I've tried every which way, absolutely NOTHING seems to work AT ALL.
- OEM unlocking is checked, if that makes a difference
- USB debugging is turned on
- Uninstalled all USB drivers related to the device, and installed them via device manager (but it gave me this error:
"the folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver, make sure it is designed to work with windows for x64-based systems)
seeing as I'm on an x64 version of Windows (its worked before with my Nexus 5, I swear)
- Tried it with different adb fastboot files, from all over the internet. All of them show just that blank space after I type in 'adb devices'
- Installed universal adb drivers.
- Samsung drivers.
- Obviously the official OnePlus drivers.
- Used Usbdeview to uninstall / force stop and re-installed the drivers.
- All in one tool
Now I'm thinking, I should try to re-lock the bootloader and unlock it again, or do like hard rest sort of things. I have no idea though, how this would affect the detection in fastboot.
Anyone have any ideas? Because I'm out of all of them, and so is most of internet.
TL;DR - Adb devices detects phone while booted in OS, but not in fastboot. Tried all methods, nothing works. Going to do lock bootloader then unlock it and try again, if not that then going to do a clean wipe and install the community build again, hoping that would work. Should I?
Click to expand...
Click to collapse
You need modified twrp by @eng.sdk.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
I am having a similar issue. I have a brand new OP3. Everything stock. I'm attempting to unlock the bootloader and have found that while ADB recognises the phone, Fastboot doesn't. I'm pretty sure it's a driver issue and I have no idea how to fix.
Hello
Everything is working good
it seems to be a problem with adb Windows 10 IDK
, it is better to do it on Windows 7
Follow this :
http://forum.xda-developers.com/oneplus-3/how-to/oneplus-3-how-to-unlock-bootloader-t3398733
abhi0502 said:
You need modified twrp by @eng.sdk.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56
Click to expand...
Click to collapse
I'm afraid you've missed the point, my friend.
If the phone does not get detected in the fastboot, it means I cannot flash anything, period. No original TWRP, no modified TWRP.
I had this exact issue and fixed it.
Fastboot would never see my device, no matter which driver package I tried or no matter how I tried to install or force the correct drivers. Turns out Windows 10 (and Windows 8) has a feature that completely prevents installation of unsigned drivers, which blocks the fastboot driver. If you're seeing "Kedracom" or "Android Device" in the device manager, then your driver is NOT actually installed. This is true even if Windows doesn't throw you an error message during install, or if you appear to force the installation. Even though it looks like you're doing the install correctly, Windows just ignores your unsigned drivers.
You need to temporarily disable the security feature to permit installation of unsigned drivers. This involves invoking a special restart function. Here's the howto for Win10: http://www.howtogeek.com/167723/how-...igned-drivers/
Once you've done this, on the next reboot you can do a forced install of the unsigned fastboot drivers you downloaded for the OP3. And simply rebooting your computer restores the security feature.
It's mostly because of the windows security over unsigned drivers.. Try the above method or just the cmd way..
Sent from my Xiaomi Mi 5 using XDA Labs
Tl;dr: DM-VERITY error after upgrading, SIM card not recognized. Can't get fastboot to work to try out a solution. Everything is going to ****.
So... this one's a doozy.
I tried to install the update by dropping it onto my phone and using TWRP to install it, which I ended up having to update. After I updated, I get a brief second popup screen when I reboot telling me that there is an invalid DM-VERITY (it only pops up for a second). When the phone loads, it doesn't recognize SIMs.
I did some research and it looks like the issue can be fixed by flashing the stock recovery. So I go to flash the stock recovery, which requires the usage of fastboot. Which I always have problems with.
Sure enough, adb recognizes my device but fastboot doesn't. I have all the drivers downloaded, so I go check on my device in device manager. For some reason, it's always listed under "Portable Devices" no matter what I do... no matter whether I enable/disable USB debugging, MTP/PTP/Charging, etc. I was under the impression that a device not being recognized by fastboot meant that you had to go find it under "other devices" and manually update the drivers. However, the only options here are ADB drivers, not bootloader ones.
So I did more research. Turns out that Windows 10 is ****ty and you have to disable secure boot to install unsigned drivers. So I went into my BIOS, disabled it, booted into safe mode, reinstalled the drivers, and... nothing.
So I'm basically where I started and for the first time in a while, I have no clue what to do. Nothing's working. I even tried to load an older version of OxygenOS and install it with TWRP (sideloading didn't work), which didn't work. I'm totally stuck and I have no idea what to do.
If you don't care about your data, just use the unbrick guide method 2. Don't know about the first one, I have never used that. That will get you to a like new phone. You could even get 4.0.3 version, using the newer unbrick toolkit.
Windows 10 x64 isn't that sh**y. I've never had issues with the drivers, and they all install automatically (fastboot, adb, unbrick tool). They all work with 4 phones without any issues: OP3, Nexus 5X, Nexus 5, Nexus 4.
True, I had just unbrick my op3 2 days back by method 2 .
Well this was wild
So I did try to unbrick and got the Sahara communication error.
But I ended up fixing my problem! Someone on Reddit correctly pointed out that the dm-verity screen often exists simply as a result of unlocking the bootloader. I was assuming that one symptom caused the other. They suggested just reflashing OnePlus's 4.1.3 full ROM. I did it exactly the same way as I had when I got the error (with TWRP) and... it worked!
I'm astounded. My phone wouldn't work with fastboot, wasn't recognized by the unbrick toolkit, and had a host of other issues. I did 7 hours of work on it and the solution ended up being that I just needed to reinstall the OS (again). My hypothesis is that there was some hidden issue that resulted in part of the firmware being incorrectly updated, and when I wiped my device as part of my troubleshooting process it was ready to be reflashed with the OS.
Thank you guys so much anyway!
Hello,
today I have a problem with my g4. When I first got this phone 2 years ago I instantly unlocked bootloader, installed supersu, xposed etc and I had no problems at all with this.
But couple weeks ago somethings happened to my snapchat so today I tried to unroot to login to my account on sc. Then i checked that I have to uninstall xposed framework too, but to do this from xposed installer app, root is needed. I thought "no problem, I will install root briefly, uninstall xposed, unroot and login to snapchat". Then I met first obstacle. I don't have recovery mode in phone. when I connect g4 by usb to pc and use adb (by typing adb reboot recovery) my phone reboots and shows green dead android with red triangle. I have to remove the battery to get phone back to life. I remembered that i always used fastboot commands to boot into custom recovery instead of installing TWRP, because flashing it never worked. But now when I try to execute any fastboot command, it only shows me "waiting for any device" in cmd. what do I have to do now? all essential drivers are installed on my pc. phone is showed as "LGE Mobile adb interface" in device manager. when I enter "adb reboot fastboot" it only reboots my phone and nothing else. Does anybody know a solution? I wouldn't like to wipe my g4 from all data. I have read many pages on google and nothing helps. I've tried fastboot on 2 different computers, one with usb 3.0 and one with 2.0 and results are the same. If someone could help me, thanks in advance.
dziedziol said:
Hello,
today I have a problem with my g4. When I first got this phone 2 years ago I instantly unlocked bootloader, installed supersu, xposed etc and I had no problems at all with this.
But couple weeks ago somethings happened to my snapchat so today I tried to unroot to login to my account on sc. Then i checked that I have to uninstall xposed framework too, but to do this from xposed installer app, root is needed. I thought "no problem, I will install root briefly, uninstall xposed, unroot and login to snapchat". Then I met first obstacle. I don't have recovery mode in phone. when I connect g4 by usb to pc and use adb (by typing adb reboot recovery) my phone reboots and shows green dead android with red triangle. I have to remove the battery to get phone back to life. I remembered that i always used fastboot commands to boot into custom recovery instead of installing TWRP, because flashing it never worked. But now when I try to execute any fastboot command, it only shows me "waiting for any device" in cmd. what do I have to do now? all essential drivers are installed on my pc. phone is showed as "LGE Mobile adb interface" in device manager. when I enter "adb reboot fastboot" it only reboots my phone and nothing else. Does anybody know a solution? I wouldn't like to wipe my g4 from all data. I have read many pages on google and nothing helps. I've tried fastboot on 2 different computers, one with usb 3.0 and one with 2.0 and results are the same. If someone could help me, thanks in advance.
Click to expand...
Click to collapse
Try another Cable. Even my original LG cable isnt working with fastboot/adb.
have you tried: https://forum.xda-developers.com/g4/general/guide-how-to-enter-fastboot-mode-t3239537
some more Information about Your Phone. usu´d or nornmally unlooked. Stock rom?
uweork said:
Try another Cable. Even my original LG cable isnt working with fastboot/adb.
have you tried: https://forum.xda-developers.com/g4/general/guide-how-to-enter-fastboot-mode-t3239537
some more Information about Your Phone. usu´d or nornmally unlooked. Stock rom?
Click to expand...
Click to collapse
Tried with another cable and nothing changes.
I tried to do this method you sent. So when I enter download mode it goes into "firmware update" after couple of seconds, my phone isn't detected on pc and the first command in console "Send_Command.exe \\.\COMx" returns "FAIL".
My G4 (H815) is stock rom, bootloader unlocked normally, didn't do any usu or anything like this. I have only rooted it with supersu 2 times (one time maybe a 1,5year ago i log out from snapchat and had to unroot and root again), installed xposed framework and did nothing else. I don't know how is it possible that I used fastboot on this phone then and now I can't do it. Half a year ago I've installed custom rom on friend's G2 and installed some programs etc. on my pc (because installing this rom didn't went that well and I had to flash stock .kdz or something like that through LGUP/LG bridge/lg flash tool, I don't remember) and I thought that it did some mess but when I tried to use fastboot on another PC, where I've installed drivers freshly, the result was the same.
So what is about "firmware update"? It is obviously stuck on 0% and I have to remove the battery to leave this mode.
dziedziol said:
Tried with another cable and nothing changes.
I tried to do this method you sent. So when I enter download mode it goes into "firmware update" after couple of seconds, my phone isn't detected on pc and the first command in console "Send_Command.exe \\.\COMx" returns "FAIL".
My G4 (H815) is stock rom, bootloader unlocked normally, didn't do any usu or anything like this. I have only rooted it with supersu 2 times (one time maybe a 1,5year ago i log out from snapchat and had to unroot and root again), installed xposed framework and did nothing else. I don't know how is it possible that I used fastboot on this phone then and now I can't do it. Half a year ago I've installed custom rom on friend's G2 and installed some programs etc. on my pc (because installing this rom didn't went that well and I had to flash stock .kdz or something like that through LGUP/LG bridge/lg flash tool, I don't remember) and I thought that it did some mess but when I tried to use fastboot on another PC, where I've installed drivers freshly, the result was the same.
So what is about "firmware update"? It is obviously stuck on 0% and I have to remove the battery to leave this mode.
Click to expand...
Click to collapse
Try installing "adb universal drivers".
Also in your computer device manager, with the phone connected, uninstall the device, adb device, modem everything related with the phone. Reinstall and try it after install the universal drivers.
Hope it works, good luck!
RuedasLocas said:
Try installing "adb universal drivers".
Also in your computer device manager, with the phone connected, uninstall the device, adb device, modem everything related with the phone. Reinstall and try it after install the universal drivers.
Hope it works, good luck!
Click to expand...
Click to collapse
Uninstalled everything lg-related from device manager, uninstalled everything lg/android-related through revo uninstaller, installed adb universal drivers, lg usb drivers, everything seems fine, when I type "adb devices" in cmd it shows my phone but, again, when I enter something related to fastboot, it only shows <waiting for any device>.
Is it even possible?? I have not seen any cases like mine in internet - somebody's phone every time was else bricked or somebody would try to flash something and errors like that happened, but I have used fastboot many times on G4 and G2, didn't reinstall windows and everything worked! Why I can't access recovery mode (dead android with red triangle) or enter fastboot or do something in download mode? What could happened?! Is it possible to fix this without wiping data from my G4? I haven't done factory reset for very long time and copying tens of thousands of photos and videos, quickmemo notes, music, voice recordings, chrome bookmarks and everything else to my PC would be a big pain for me.
After all, thanks for replies, and I hope that we will find solution for this.
dziedziol said:
Uninstalled everything lg-related from device manager, uninstalled everything lg/android-related through revo uninstaller, installed adb universal drivers, lg usb drivers, everything seems fine, when I type "adb devices" in cmd it shows my phone but, again, when I enter something related to fastboot, it only shows <waiting for any device>.
Is it even possible?? I have not seen any cases like mine in internet - somebody's phone every time was else bricked or somebody would try to flash something and errors like that happened, but I have used fastboot many times on G4 and G2, didn't reinstall windows and everything worked! Why I can't access recovery mode (dead android with red triangle) or enter fastboot or do something in download mode? What could happened?! Is it possible to fix this without wiping data from my G4? I haven't done factory reset for very long time and copying tens of thousands of photos and videos, quickmemo notes, music, voice recordings, chrome bookmarks and everything else to my PC would be a big pain for me.
After all, thanks for replies, and I hope that we will find solution for this.
Click to expand...
Click to collapse
You could Check if FWUL from SteadfasterX is helping You out with your Problem.
https://forum.xda-developers.com/an.../live-iso-adb-fastboot-driver-issues-t3526755
With the Installed Salt You cann Backup your Device.
dziedziol said:
Uninstalled everything lg-related from device manager, uninstalled everything lg/android-related through revo uninstaller, installed adb universal drivers, lg usb drivers, everything seems fine, when I type "adb devices" in cmd it shows my phone but, again, when I enter something related to fastboot, it only shows <waiting for any device>.
Is it even possible?? I have not seen any cases like mine in internet - somebody's phone every time was else bricked or somebody would try to flash something and errors like that happened, but I have used fastboot many times on G4 and G2, didn't reinstall windows and everything worked! Why I can't access recovery mode (dead android with red triangle) or enter fastboot or do something in download mode? What could happened?! Is it possible to fix this without wiping data from my G4? I haven't done factory reset for very long time and copying tens of thousands of photos and videos, quickmemo notes, music, voice recordings, chrome bookmarks and everything else to my PC would be a big pain for me.
After all, thanks for replies, and I hope that we will find solution for this.
Click to expand...
Click to collapse
<waiting for any device> because if windows don't recognizes the device as it should adb will never "see" it.
While on the process, pay attention to the device manager. When you get the message in cmd of <waiting for any device>, uninstall your device and make device manager search for devices.
If still shows you as the same device and adb still waiting, you might have to uninstall the device and install it manually choosing from a list. Now I don't remember how it is suppose to be detected...
During install and uninstall don't disconnect the device from the computer, and remember, use a USB2 port.
I already got that several time. Took me time but that's how I managed to fix it.
okay, guys, it is a shame for me... but I worked out what is wrong with my phone.. maybe not with my phone, but what is wrong with me.
all I needed to do to launch a fastboot was type "adb reboot bootloader" and everything is fine now.
Sorry that you had to give me so much tips and this problem turned to be my stupid mistake, but I'm glad that i won't have to install linux and play with virtual machines to repair my phone
Anyway, thanks for your kindness and will to help, greetings for everyone!
@edit: Turns out that i have one more question. I want to uninstall xposed framework. But there are many versions of uninstaller on their site. Is there any risk that i will "break" my G4 if I use the newest one? I have xposed version 87 and I don't want to do something stupid. thanks in advance.
somebody knows? if I can use the newest version of uninstaller no matter which version of xposed framework im using?