Twrp black screen on latest cb - OnePlus 3 Questions & Answers

I guys, i'm on latest cb but when i tryied to flash twrp recovery with fastboot, after flash complete, i've reboot in twrp but i get stuck on a black screen.
I've also tryied with garak version.

PIN protection for userdata?

maybe related with custom twrp? I think, you flashed official twrp with custom twrp.

You need to use the unbrick tool method two

Did you try the modified twrp 3.0.2-21 or 3.0.2-22??
Official twrp doesn't work with Community Builds.

Related

[HELP] Unable to flash Stock/TWRP recovery or Any ROM via FASTBOOT(bootloader)

I was on OOS community build 3.5.3 with modified twrp-3.0.2-19-oneplus3.
I wiped everything except internal storage after that I tried to flash official TWRP.
After installing official twrp via modified TWRP. Niether I can boot into my recovery nor able to install any recovery via fastboot.
it I use "fastboot flash recovery recovery.img"
after installing recovery with this command My bootloader get stuck then I have to again restart my bootloader.
please help
You're probably stil on 3.5.2 firmware which isnt compatible with official twrp. Try and get into fastboot and try flashing modified twrp again. Then reboot in recovery and flash 3.2.6 firmware (not the rom) from modified twrp. Then reboot and flash official twrp from recovery or in flashify app.
i had this problem the other day, fixed this by flashing the modified recovery from a post here turn it off the booted it up by holding vol down + power and somehow it worked i was able to go into twrp
innocentwoolf said:
I was on OOS community build 3.5.3 with modified twrp-3.0.2-19-oneplus3.
I wiped everything except internal storage after that I tried to flash official TWRP.
After installing official twrp via modified TWRP. Niether I can boot into my recovery nor able to install any recovery via fastboot.
it I use "fastboot flash recovery recovery.img"
after installing recovery with this command My bootloader get stuck then I have to again restart my bootloader.
please help
Click to expand...
Click to collapse
I have same issue it is called half-brick go to full brick post here (http://forum.xda-developers.com/oneplus-3/how-to/guide-mega-unbrick-guide-hard-bricked-t3405700)
read whole post and prefer method 2 it will work like charm and i got when i am installing freedom os CE version and if it work then thank me
are you stuck with a black screen when booting to recovery if yea then wits the same situation i was in.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56 that recovery helped me
Seagorilla2 said:
You're probably stil on 3.5.2 firmware which isnt compatible with official twrp. Try and get into fastboot and try flashing modified twrp again. Then reboot in recovery and flash 3.2.6 firmware (not the rom) from modified twrp. Then reboot and flash official twrp from recovery or in flashify app.
Click to expand...
Click to collapse
yes.. tried that only and it worked...
thanks
danxtian said:
are you stuck with a black screen when booting to recovery if yea then wits the same situation i was in.
http://forum.xda-developers.com/showpost.php?p=68691560&postcount=56 that recovery helped me
Click to expand...
Click to collapse
that helped me to thanks

Can't flash any Custom Recovery on OP3

Hi everyone,
I've a little problem with my OP3, Yesterday I removed my OOS 3.2.6 with TWRP, I flashed the stock recovery back and then I've sideloaded the last OOS 3.5.3 Community Build. Today i'd like to flash the TWRP, i launched the Fastboot menu, nothing seems to go wrong by flashing but when i tried to boot into the recovery, the "1+ powered by android" appears for 5 sec and then a black screen, no TWRP screen... Same problem by trying to restore the OnePlus stock recovery..
I tried "fastboot -w" (wipe) this bring back the stock recovery.
I tried to sideload, OOS 3.5.3, OOS 3.5.3, ResurectionRemix 2.7.4 and CM14 but all of them failed at 47% of work...
I'm thinking that there is a problem caused by an encryption...
"fastboot format userdata" didn't solve the problem..
I'd like to know wich partition i can format/erase to remove this encryption (Loss of data is not a problem for me)
Thanks in advance
Have you tried to flash the modified TWRP ?
Dushaine said:
Have you tried to flash the modified TWRP ?
Click to expand...
Click to collapse
Yes, same problem as TWRP
Same thing happened to me on flashing twrp after sideloading CB 3.5.2 through stock recovery. But flashing the modified twrp 3.0.2-19 solved the issue.
It is newer firmware that won't let you boot into TWRP.
Flash modified TWRP 3.0.2-19 recovery through fast boot.
Then flash <=3.5.0 firmware from here using TWRP.
Then flash this TWRP 3.0.2-0 image again from fast boot.
Then flash a ROM of your liking.
If all else fails, you can try this (flash stock recovery and 3.2.4 FW) WITHOUT relocking and then flash TWRP 3.0.2-0 from the above link to see if that works.
AJay27 said:
Same thing happened to me on flashing twrp after sideloading CB 3.5.2 through stock recovery. But flashing the modified twrp 3.0.2-19 solved the issue.
Click to expand...
Click to collapse
kgs1992 said:
It is newer firmware that won't let you boot into TWRP.
Flash modified TWRP 3.0.2-19 recovery through fast boot.
Then flash 3.5.0 firmware from here using TWRP.
Then flash this TWRP 3.0.2-0 image again from fast boot.
Then flash a ROM of your liking.
If all else fails, you can try this (flash stock recovery and 3.2.4 FW) without relocking and then flash TWRP 3.0.2-0 from the above link to see if that works.
Click to expand...
Click to collapse
I've been able to Flash the Modified recovery, and it booted. By flashing the patch, no problem detected, but after flashing the 3.0.2-0 same black screen as earlier...
So I flashed the modified back, and by trying to flash ResurectionRemix for exemple, no error happenned but, when boot begin, same problem as twrp ...
EDIT : Sorry guys, i didn't read correctly.. I was flashing the same patch ! The 3.5.3 and not the 3.5.0 !!! Normal TWRP is booting corectly now, i'll see for ROM !
Thank you very much to you !!
EDIT 2 : RR 2.7.4 BOOT !!! Thank you so much !

OnePlus3 recovery

I've recently flashed the latest twrp on my oneplus3 a3003 through fastboot. All fine, I flashed the cyanogenmod 14.1 and the gapps 7.1 over the oxygen os. Now I tried to boot into recovery to flash the pixelfy zip file, but I found out that I can't access recovery mode. All I get is boot logo and the capacitive buttons illuminated for a while, then the screen goes off and I have to press the power button for 6/7 seconds. I tried reflashing the recovery.img through the terminal and no result, I tried through TWRP manager, it says successful but the result is still the same. Ah, before installing the twrp I hard bricked the device and I unbricked it, so to me it's like a corrupted partition. Is there a way to restore twrp (or to restore the recovery partition, still being able to flash twrp) without losing data? If no, is there a way to restore it to a funcional state without having to use qualcomm drivers? If no, is there a way to restore it to a funcional state AND keep it that way?
I solved it. Basically the cm14.1 version was blocking twrp or any other recovery aside from the cm recovery. I found a fixed version of the twrp somewhere.
Vas0sky said:
I solved it. Basically the cm14.1 version was blocking twrp or any other recovery aside from the cm recovery. I found a fixed version of the twrp somewhere.
Click to expand...
Click to collapse
Is it possible that you gave me this recovery? I'm looking for one too same problem as you
Thanks
http://forum.xda-developers.com/devdb/project/dl/?id=21065&task=get
Here you go.

Oneplus 5T root problem

Hello all If any one can help me ,
I was rooted running rooted stock oxygen os before on my Oneplus 5T
after flashing Oxygen OS 5.1.4 Full Zip my phone is not rooting it gets in initial oneplus logo and freeze there without loading OS
Phone is working fine after Flashing Oxygen OS 5.1.4 Full Zip without any issue its not booting after flashing either SuperSu or Magisk
Steps which I follow are
1 Flash custom recovery I have tried both Codeworkx TWRP | Blu_Spark
2 after flashing recovery boot in to recovery flash Supersu or magisk
3 reboot
when I reboot if i Flash supersu it stuck on oneplus logo, If i flash magisk it reboot itself to fastboot so Os is not loading at all.
I have to flash full Zip again every time to get it working but then I dont have root access.
I have tried at least 10 times with different even old versions of magisk and supersu with out any success.
Is there any particular recovery or different version of magisk or superuse I need to flash?
your help will be really appreciated.
Try a different approach. Instead of installing recovery, just get phone rooted first. There is a way where you can boot into twrp (without installing it), and then flash magisk/supersu zip. If your phone is rooted, then you can install twrp later (or keep oem recovery)
This is how you boot into twrp (or any recovery): fastboot boot recovery recovery.img
Let me know how it goes.
As you said boot to recovery without installing it.
One problem currently I am installing recovery and flashing root. After that phone is not booting up in to OS it stuck on oneplus logo. Then I have to force off phone boot in to recovery and flash full os zip to get it working. I can boot in to TWRP because my os didn't load. Now if I use your method and flash root file and if phone won't boot to os that means I won't be able to boot in to TWRP again to flash full os zip to get phone working atleast without root. Any idea?
Huh, frankly I have no idea why you are facing this menace. I can just give two suggestions.
1. Try with older, more stable versions of TWRP and Magisk
2. Get yourself a custom ROM, most ROM's will work flawlessly after flashing root files
Hope for the best!
I usually switch from OpenBeta to LOS and back again. Here's how I switch back to OpenBeta (steps should work for official OOS):
1) Back everything on internal storage up. This one's important
2) Boot into official OOS recovery
3) Wipe EVERYTHING (this is why you need to follow Step 1)
4) Sideload the version of OOS you want. The instructions will be right there on the recovery screen
5) Boot into Fastboot and flash TWRP
6) Flash Magisk and (optional) Xposed

Question about TWRP.

I wanted to install Lineage OS and was curious if I could install it without having TWRP flashed into recovery. I mean, I'll still use fastboot boot twrp, ill just won't have it in my recovery.
I'm asking because when I tried to do fastboot flash recovery twrp it said failed antirollback check. Would like some help if possible
Once you temporarily boot twrp, you can it flash twrp image from within it.
It would work without, but you won't be able to update LOS, unless you boot twrp again.
See: - https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219
And don't downgrade MIUI firmware/rom.
corkiejp said:
Once you temporarily boot twrp, you can it flash twrp image from within it.
It would work without, but you won't be able to update LOS, unless you boot twrp again.
See: - https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219
And don't downgrade MIUI firmware/rom.
Click to expand...
Click to collapse
Thanks for your help !
Anti rollback is such a pain in the ass.

Categories

Resources