give some suggestions on this problem plz.....
Installation Files
1.) Required twrp
**2) Required Firmware 3.2.6 one time installation** this is what you are missing
3.) Rom
4.) Open Gapps
Read the op it gives you all the info m8
Dee6600 said:
give some suggestions on this problem plz.....
Click to expand...
Click to collapse
If you try and read the first post ...you will get it very clear..why your finger sensors not working and which firmware you need to flash...
http://forum.xda-developers.com/showthread.php?t=3403365
Sent from my ONEPLUS A3003 using Tapatalk
Dee6600 said:
give some suggestions on this problem plz.....
Click to expand...
Click to collapse
"Make sure that OxygenOS firmware+modem CE 3.5.5 is installed on your device. Modified TWRP 3.0.2-22 is needed as well for further updates."
I found post on xda with same problem... You need to downgrade your radio(or something) on xda you can find flashable zip with it
On the latest official rr build, you need to be on 3.5.5 CB firmware for fingerprint scanner to work properly.
aadityarulez said:
On the latest official rr build, you need to be on 3.5.5 CB firmware for fingerprint scanner to work properly.
Click to expand...
Click to collapse
+1 using RR latest as secondary ROM whereas CB 3.5.5 as primary and everything running perfectly
Sent from my ONEPLUS A3003 using Tapatalk
I confirm here 3.5.5-CB + BJRR 13.11.2016 working
Related
BliSS-mm-6.4-R68 For Honor3C(H30-U10)
Bliss ROM has been based on CM,slim.omni and original Remix ROM builds, this creates an awesome combination of performance, customization, power and the most new features, brought directly to your Device
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
ROM Download Link:
https://mega.nz/#!QRI1mYSQ!qFxhf-IAuHmX22Tto5s5ditrlJamlXjXqxMcrNkIx3o
Google Apps:
http://opengapps.org/
Installation Instructions:
> Before any modifications please take a nandroid backup of your phone so you can revert it in case anything goes wrong
> Go to recovery and wipe all partitions except SD card
> Flash the Rom zip
> Flash GApps right after flashing the Rom zip
#No need to Flash Boot.img(Separately)
In case of no signals issue, flash an appropriate modemfix from codelover's thread http://forum.xda-developers.com/android/development/guide-huawei-honor-3c-h30-u10-t2837773
# Features :
All Cm 12.1 And 13 Features
oct Security Patch 2016
-Doze
-Themes
-Improved Performance
-Personalization
-Extra CM Enhancement
-Gestures
-App Circle Bar
-C Clock Widget
-Super Smooth
-Quick Unclock
-Battery Optimizer
-Latest Patch Included
-No Network drop
Bug:
Vpn
2g-3g Switch
Please Hit Thanks Button If You Like and Support My Work :
Credits:
@hassanjavaid8181(ME)
@Draculla444
@Manjunath Yushu(For Ussd Fix)
@fire855
@ferhung
@hyperion70
@Vipul Jha
@Surajlad9
Kishan Patel
XDA:DevDB Information
Bliss M v6.4 r68-for Honor3C(H30-U10), ROM for the Honor 3C
Contributors
hassanjavaid8181, hassanjavaid8181
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: cyanogenmod
Version Information
Status: Stable
Current Stable Version: v1
Created 2016-11-02
Last Updated 2016-11-05
ScreenShots:
Downloading. ......
Keep alive honor 3c forever hats off bro
Sent from my SM-J200F using Tapatalk
Another great job. But why permissive Selinux? For N-ify?
Sent from my Galaxy Tab 3 using XDA Labs
Hello well done really nice room.
I have one question how can I use USB OTG? Or is not working on these roms.
tanx bro ....keep alive honor 3c....
Good work bro but i want to see Bugless RR ROM
Navigation buttons are not working correctly.
TamaziAce said:
Navigation buttons are not working correctly.
Click to expand...
Click to collapse
Turn them off and on again.
Sent from my honor 5X using XDA Labs
Hi,
My mobile data doesnt want to connect.
I had tried offline and reebot, but nope. The mobile data still doesnt connect
And which version of open gapps suitable for this rom? I've flashed mini version but it failed.
Rayquaza said:
Hi,
My mobile data doesnt want to connect.
I had tried offline and reebot, but nope. The mobile data still doesnt connect
And which version of open gapps suitable for this rom? I've flashed mini version but it failed.
Click to expand...
Click to collapse
What failed? Try pico instead. For your data connection problem, maybe it's a temporary problem with your carrier.
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
What failed? Try pico instead. For your data connection problem, maybe it's a temporary problem with your carrier.
Sent from my Galaxy Tab 3 using XDA Labs
Click to expand...
Click to collapse
Will try it later. Thanks
My carrier doesnt has a problem. It's proved when i revert back to the previous rom.
Rayquaza said:
Will try it later. Thanks
My carrier doesnt has a problem. It's proved when i revert back to the previous rom.
Click to expand...
Click to collapse
Goodluck with it,
Sent from my Galaxy Tab 3 using XDA Labs
Rayquaza said:
Will try it later. Thanks
My carrier doesnt has a problem. It's proved when i revert back to the previous rom.
Click to expand...
Click to collapse
Replace firmware folder , located at ROOT/etc
ClarenceGohan said:
Replace firmware folder , located at ROOT/etc
Click to expand...
Click to collapse
What fikes will be replaced?
Sent from my Galaxy Tab 3 using XDA Labs
adriansticoid said:
What fikes will be replaced?
Click to expand...
Click to collapse
Replace the modem_1_wg_n.img and catcher_filter_1_wg_n.img
IF that doesnt help that try replacing apns.xml
ClarenceGohan said:
Replace the modem_1_wg_n.img and catcher_filter_1_wg_n.img
IF that doesnt help that try replacing apns.xml
Click to expand...
Click to collapse
@Rayquaza try this out bro.
Sent from my Galaxy Tab 3 using XDA Labs
TamaziAce said:
Hello well done really nice room.
I have one question how can I use USB OTG? Or is not working on these roms.
Click to expand...
Click to collapse
Otg in every cm13 ROM..you can use it with es file manager
TamaziAce said:
Navigation buttons are not working correctly.
Click to expand...
Click to collapse
What problem you are facing in navigation button??
Rayquaza said:
Hi,
My mobile data doesnt want to connect.
I had tried offline and reebot, but nope. The mobile data still doesnt connect
And which version of open gapps suitable for this rom? I've flashed mini version but it failed.
Click to expand...
Click to collapse
Got to setting/sim settings and see your apn setting is there??if not fill it with you service provider settings..
For gapps I recommend Pico.and if you want Google now launcher you can use micro..
Download link:
https://mega.nz/!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8RJKw
(SPFlashTool version)
Changelog:
Optimization system
Minor Bug fixes
Original thread:
http://bbs.elephone.hk/forum.php?mod=viewthread&tid=12927&extra=page=1&mobile=2
Thanks for the Download. I have one question, which TWRP Version and which SuperSU Version can I install after update with this new Firmware?
Sent from my P9000 using XDA-Developers Legacy app
Hello, I used the last one file https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip. Working well. But xposed not working, neither with [ROM] [STOCK] Elephone P9000 20160810
gyurman said:
Hello, I used the last one file https://download.chainfire.eu/1021/SuperSU/SR3-SuperSU-v2.79-SR3-20170114223742.zip. Working well. But xposed not working, neither with [ROM] [STOCK] Elephone P9000 20160810
Click to expand...
Click to collapse
Hi.
You have to use grorkmod.
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers Legacy app
xposed with grorkmod
vsrookie said:
Hi.
You have to use grorkmod.
Greetings
Vsrookie
Sent from my P9000 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Hello, big thanks for you. Working well with grorkmod. I search for long time this.
ogeid79 said:
Download link:
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Click to expand...
Click to collapse
Link seems not to be working ...
oke, indeed a space between the R and 8 in the end. remove this and link is working
daheufster said:
Link seems not to be working ...
Click to expand...
Click to collapse
Retrive, work perfectly for me!
ogeid79 said:
Retrive, work perfectly for me!
Click to expand...
Click to collapse
its because you didnt add the full link, the decryption code is missing
Hi!
HOw can i install TWRP on the latest stock rom 20171201 ???
I've look for a solution but couldn't make it to work
Thanks!!
Same problem, first start TWRP recovery ok.
Power off.
Vol.+ and Power and stock recovery appears...
UPDATE:
Flash Recovery as usual, open it (Vol. + & Power), install any type of file (for example SuperSU?!) and then restart. TWRP now work well!!
Over two months later and this has still got the wrong URL in it?!?! Why even bother?
For those of us who want the correct link it's https://mega.nz/!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8RJKw
Now the link in first page is fixed..... stay happy @blueivy.....!
Inviato dal mio iPhone utilizzando Tapatalk
whats the kernel version on this rom?
could someone post a working link, I have tried several times to download this file without success. thank you
Is there any working twrp with OOS 4.0.2....I am using stock nougat...I tried to flash twrp it says successful in cmd but it boots to stock recovery every time. Also is there any ROM which gives me VoLTE.? I have A3000 and VoLTE doesn't work in India.
Make sure you've unlocked your bootloader.
Official v3.0.3-0 and blu_spark v14 TWRP work with OOS v4.0.2
dbabaev21 said:
Make sure you've unlocked your bootloader.
Official v3.0.3-0 and blu_spark v14 TWRP work with OOS v4.0.2
Click to expand...
Click to collapse
Latest is v15 i think
Nobody07 said:
Latest is v15 i think
Click to expand...
Click to collapse
yes. https://forum.xda-developers.com/oneplus-3/development/kernel-t3404970/post70687988#post70687988
nadzzsam said:
Is there any working twrp with OOS 4.0.2....I am using stock nougat...I tried to flash twrp it says successful in cmd but it boots to stock recovery every time. Also is there any ROM which gives me VoLTE.? I have A3000 and VoLTE doesn't work in India.
Click to expand...
Click to collapse
For TWRP, the answer is as above.
As regards VoLTE, it works in India if you have the A3003 model at least in stock OOS ROM (3.2.6, 3.2.8, 4.01 and 4.0.2 all of which I can personally vouch for). Your issue might be that the A3000 may be missing the bands required for VoLTE in India.
Official TWRP 3.0.4.0 apparently contains a few bug fixes that is present in 3.0.3-0 and they advice you to use 3.0.4-0 in the official thread (https://forum.xda-developers.com/oneplus-3/development/recovery-official-twrp-oneplus-3-3t-t3543391)
tnsmani said:
For TWRP, the answer is as above.
As regards VoLTE, it works in India if you have the A3003 model at least in stock OOS ROM (3.2.6, 3.2.8, 4.01 and 4.0.2 all of which I can personally vouch for). Your issue might be that the A3000 may be missing the bands required for VoLTE in India.
Click to expand...
Click to collapse
But internet works just fine.... can I use a ROM for it though?
nadzzsam said:
But internet works just fine.... can I use a ROM for it though?
Click to expand...
Click to collapse
Internet will work but may not at 4G speeds. If you don't have the band for VoLTE, you can not do anything about it. Some research is going on here:
https://forum.xda-developers.com/oneplus-3/help/unlocking-lte-bands-t3425871
See how difficult it is.
The one on the blu_spark kernel page is faster than offical latest twrp ?
SpartaKurd said:
The one on the blu_spark kernel page is faster than offical latest twrp ?
Click to expand...
Click to collapse
What do you mean by 'faster'? The loading time?
If your data partition is on f2fs, then both versions take their own time.
tnsmani said:
What do you mean by 'faster'? The loading time?
If your data partition is on f2fs, then both versions take their own time.
Click to expand...
Click to collapse
yeah, loading/waiting time...
I have flashed Lineage OS 14.1 on my Asus Z00L. Then I rooted my phone by flashing the su add-on x64 file from the Lineage website. Once I reboot my phone the problem arises. Long pressing the power button causes the phone to directly reboot instead of displaying the power off menu dialogue box. Please help. I can't root my phone due to this problem.
Sent from my ASUS_Z00LD using Tapatalk
Z00L is arm not x68
https://wiki.lineageos.org/devices/Z00L
Can you flash uninstall zip for addonsu ?
kurtn said:
Z00L is arm not x68
https://wiki.lineageos.org/devices/Z00L
Can you flash uninstall zip for addonsu ?
Click to expand...
Click to collapse
Ohk so it mean the problem occured because i flashed wrong add-on ... Will try by first uninstalling add-on by flashing armx64 su removal ...and then flash the correct add-on su
Sent from my ASUS_Z00LD using Tapatalk
Correct is arm64
kurtn said:
Correct is arm64
Click to expand...
Click to collapse
Yeahhh....so why does the problem persists
Sent from my ASUS_Z00LD using Tapatalk
Kaushal sawant said:
Yeahhh....so why does the problem persists
Click to expand...
Click to collapse
What did you flash? x64 doesn't exist.
kurtn said:
What did you flash? x64 doesn't exist.
Click to expand...
Click to collapse
arm64 su add-on
Sent from my ASUS_Z00LD using Tapatalk
Sorry, can't help. Maybe you get help in your phone's LOS thread.
kurtn said:
Not addonsu-14.1-arm64-signed.zip from official downloads ?
Click to expand...
Click to collapse
Yes I flashed the add-on from official Lineage addonsu-14.1-arm64-signed.zip
Sent from my ASUS_Z00LD using Tapatalk
Hi , is it a possibility to get the custom rom for my Tecno Spark 4 Lite and TWRP recovery ... please help me
Sent from my iPhone using Tapatalk
Hey. I also have a Tecno spark 4 lite and I have manage to Port a TWRP recovery for it:laugh:, very proud of myself, as it was my first try to Port a recovery. Soon I was upload it and provide a link here.
For custom rom use GSI, I am using Phhusson Quack AOSP GSI and it is a good daily driver. For any questions related to this just PM me
SHAH RUKH 45 said:
Hey. I also have a Tecno spark 4 lite and I have manage to Port a TWRP recovery for it:laugh:, very proud of myself, as it was my first try to Port a recovery. Soon I was upload it and provide a link here.
For custom rom use GSI, I am using Phhusson Quack AOSP GSI and it is a good daily driver. For any questions related to this just PM me
Click to expand...
Click to collapse
I was trying to unlock the bootloader but It never works
Sent from my iPhone using Tapatalk
-iNCEPTiON- said:
I was trying to unlock the bootloader but It never works
Click to expand...
Click to collapse
Try
fastboot flashing unlock
Instead of
fastboot oem unlock
SHAH RUKH 45 said:
Try
fastboot flashing unlock
Instead of
fastboot oem unlock
Click to expand...
Click to collapse
It says waiting for device...
Sent from my iPhone using Tapatalk
-iNCEPTiON- said:
It says waiting for device...
Click to expand...
Click to collapse
Install fastboot drivers
When you connect mobile to PC
In device manager there will be a new driver called Android.
Click on it and select update driver and then select online option
SHAH RUKH 45 said:
Install fastboot drivers
Click to expand...
Click to collapse
Its installed already...
Sent from my iPhone using Tapatalk
-iNCEPTiON- said:
Its installed already...
Click to expand...
Click to collapse
Rewatch my previous comment
SHAH RUKH 45 said:
Rewatch my previous comment
Click to expand...
Click to collapse
I will try and report back
Sent from my iPhone using Tapatalk
-iNCEPTiON- said:
I will try and report back
Click to expand...
Click to collapse
Did it work?
SHAH RUKH 45 said:
Did it work?
Click to expand...
Click to collapse
I m selling the phone...
Sent from my iPhone using Tapatalk
SHAH RUKH 45 said:
Hey. I also have a Tecno spark 4 lite and I have manage to Port a TWRP recovery for it:laugh:, very proud of myself, as it was my first try to Port a recovery. Soon I was upload it and provide a link here.
For custom rom use GSI, I am using Phhusson Quack AOSP GSI and it is a good daily driver. For any questions related to this just PM me
Click to expand...
Click to collapse
What GSI version did you install? Did you also use the vndklite image?
I'm seeking to install an Android 11 based GSI on my Tecno Spark 4 Air (KC6)
Any help would be appreciated, Thanks.
_Deeka_ said:
What GSI version did you install? Did you also use the vndklite image?
I'm seeking to install an Android 11 based GSI on my Tecno Spark 4 Air (KC6)
Any help would be appreciated, Thanks.
Click to expand...
Click to collapse
I have tried both vndk and vndk-lite version. Both work flawlessly on my device. Also GSI are generic so there is no" based on KC6" GSI. Look some tutorials on how to install GSI on youtube.
SHAH RUKH 45 said:
I have tried both vndk and vndk-lite version. Both work flawlessly on my device. Also GSI are generic so there is no" based on KC6" GSI. Look some tutorials on how to install GSI on youtube.
Click to expand...
Click to collapse
I got to install phhusson's vndklite GSI on the phone and almost everything worked except MTP. Did you face the same challenge?
I also tried other GSI builds like Andy Yan's unofficial Lineage in which MTP functioned correctly and Pixel experience managed by Ponces. (This one was very unstable for me)
Btw, are there major differences between the vndklite and vndk images?
Thanks
_Deeka_ said:
I got to install phhusson's vndklite GSI on the phone and almost everything worked except MTP. Did you face the same challenge?
I also tried other GSI builds like Andy Yan's unofficial Lineage in which MTP functioned correctly and Pixel experience managed by Ponces. (This one was very unstable for me)
Btw, are there major differences between the vndklite and vndk images?
Thanks
Click to expand...
Click to collapse
Just try another version of GSI, i also remeber a MTP issue and it was fixed in next version
Okay it is fixed now