need lenovo vibe p1 c58 qcn (nvram) - Lenovo Vibe P1 Questions & Answers

hi.. i bricked my lenovo vibe p1c58 . in backup restoration process i flashed by mistake different nvram..basically i restored another phones efs in twrp while i was trying to unbrick my phone..
when the restoration process finished and the phone booted up there was no carrier icons..then i realized that i restored different efs (qcn,nvram) from twrp backup... the backup was from a differnt phone..
so there was no carrier icons on the left top of screen..my imei s were gone.. luckily i had the phone box with imei s on it..
so i downloaded the two qcn files from this forum edited the two qcn files with my imei s .. and restored them with qpst to the phone..the carrier signals came back , the imeis are ok.. but there is no signal .. and when i try to make a call it says deactivate the airplane mode but the airplane mode is not activated.. tried both qcn files without luck..
i think i need p1c58 qcn.. if somebody have lenovo vibe p1 c58 and read this forum will you please uplod ithe qcn file of your phone? it will be much appreciated. i think its my only option to bring the phone back from the dead.

problem solved ..

C58 qcn
Describe how you solved this problem? Please detail!

menetcc said:
hi.. i bricked my lenovo vibe p1c58 . in backup restoration process i flashed by mistake different nvram..basically i restored another phones efs in twrp while i was trying to unbrick my phone..
when the restoration process finished and the phone booted up there was no carrier icons..then i realized that i restored different efs (qcn,nvram) from twrp backup... the backup was from a differnt phone..
so there was no carrier icons on the left top of screen..my imei s were gone.. luckily i had the phone box with imei s on it..
so i downloaded the two qcn files from this forum edited the two qcn files with my imei s .. and restored them with qpst to the phone..the carrier signals came back , the imeis are ok.. but there is no signal .. and when i try to make a call it says deactivate the airplane mode but the airplane mode is not activated.. tried both qcn files without luck..
i think i need p1c58 qcn.. if somebody have lenovo vibe p1 c58 and read this forum will you please uplod ithe qcn file of your phone? it will be much appreciated. i think its my only option to bring the phone back from the dead.
Click to expand...
Click to collapse
Hi menetcc
You will not be able to upload this file here?
My problem is too.
Regards

TechnoSaurus said:
Hi menetcc
You will not be able to upload this file here?
My problem is too.
Regards
Click to expand...
Click to collapse
here you are

Misha792047 said:
Describe how you solved this problem? Please detail!
Click to expand...
Click to collapse
you will have to upload the qcn file to your phone with qpst

Hi
Can I ask please anybody have any idea how I am able to update Vibe P1c58 android sytem? Is no option from settings
Lenovo smart assistant still not working, or I am stupid to use
Many thanks

Related

Modify m9kefs.img file with HEX editor

Hello,
I've lost my IMEI after flashing Carbon Rom and it shows unknown in setting. I don't have my EFS backup and I tried many ways to repair it with no luck.
Now I got a backup of my EFS folder with Freegee and I have my m9kefs.img files.
m9kefs1-backup.img
m9kefs2-backup.img
m9kefs3-backup.img
Is there any way to edit these files with Hex editors and inject my IMEI into these files?
Thanks in advance.
No one knows about it??
I think yu jux try flashing another modem....!!
Sent from my LG-E975 powering Stock 4.4.2 & SOLID Kernel
Thanks for your answer in both of my topics... The issue is that I'm in Iran and don't know which modem should I flash! I think this is for Arab ROMs but I couldn't find that modem to flash!
IMEI in Antutu!!!
Can someone please see this screenshot from my Antutu app? When I dial *#06# it shows "null" , in setting IMEI is Unknown and in Antutu IMEI shows like attached picture! What is it and how to fix?! I'm tired of this issue that several months I'm working on it!!!
Creative9170 said:
Can someone please see this screenshot from my Antutu app? When I dial *#06# it shows "null" , in setting IMEI is Unknown and in Antutu IMEI shows like attached picture! What is it and how to fix?! I'm tired of this issue that several months I'm working on it!!!
Click to expand...
Click to collapse
Check this thread for modems...
http://forum.xda-developers.com/showthread.php?t=2806204
Sent from my LG-E975 powering Stock 4.4.2 & SOLID Kernel
Try this:
Backup your /data. Move it to your PC.
Flash Stock KDZ (this yould recover your imei)
Backup EFS with FreeGee
Flash your actual ROM
If nedeed restor EFS
Restore /data
Post your results.

I think i brokekeded it HELP!

Hi guys,
Being the arrogant bigheaded know-it-all that I am I thought I could do this by myself. Alas I was wrong.
I was attempting to carrier unlock my s4 mini (i9195) on EE, I rooted it first which was a success. I then tried the "regionlockaway" approach which claimed to be a success but after several reboots was not =[
I then delved deeper into the forums and read that it may work if i were to odin flash my device to MJ7.
I followed the steps of un checking the auto-reboot and F. reset boxs and proceded to put phone into "odin mode" and then Flash, disconnect, power off, boot back into odin mode, reflash and then boot normally.
This went horribly wrong. my poor little phone is very confused. it doesn't know its baseband and is displaying IMEI null.
I have done some further research and all post seem to say I must reflash to original ROM or inject IMEI?
I cannot find the required ROM files and IMEI injection, unless as simple as "download file x, insert IMEI from phone sticker into box x, flash with program x and all will be fine" then I am stuck in a lonely phoneless place.
PLEASE HELP ME! and i promise I wont try these things again!
Thanks in advance guys!
Not an expert at trying to restore IMEIs but maybe try flashing the latest unbranded firmware ... Though the download is slooow but it's worth a shot http://www.sammobile.com/firmwares/download/48645/I9195XXUCOD3_I9195BTUCOD1_BTU/
Also just for the future your best to save EFS folder from your phones root. Also developer Wanam does a partition backup tool which will allow you to backup and restore your EFS.
RuffBuster said:
Not an expert at trying to restore IMEIs but maybe try flashing the latest unbranded firmware ... Though the download is slooow but it's worth a shot
Also just for the future your best to save EFS folder from your phones root. Also developer Wanam does a partition backup tool which will allow you to backup and restore your EFS.
Click to expand...
Click to collapse
Thanks man i'll give it a go and EFS folder?
i love you! IT WORKED! thanks dude!!!

OPPO_NV_BACKUP. The NV partition is invalid.

Hello everyone,
I post here because i have a problem with my find7.
After a bad flash of Nameless OTA, my phone don't boot.
He was bricked but i have found an unbrick tool on >community.oppo.com/en/forum.php?mod=viewthread&tid=23067&extra=#post-308276OppoForum.
This worked great and my phone boot on ColorOs 1.2.5i.
At this time, an error message in notification show OPPO_NV_BACKUP. The NV partition is invalid.
[IMG="Oppo NV Backup"]oppostyle.com/media/uploads/rma/22287/1469033216/Screenshot_2016-07-14-21-06-47-950.png
NO IMEI, INTERNAL STORAGE PROBLEM AND BASEBAND UNKNOW.
What is the problem man ?
Thank's a LOT !
AlexCmb said:
Hello everyone,
I post here because i have a problem with my find7.
After a bad flash of Nameless OTA, my phone don't boot.
He was bricked but i have found an unbrick tool on >community.oppo.com/en/forum.php?mod=viewthread&tid=23067&extra=#post-308276OppoForum.
This worked great and my phone boot on ColorOs 1.2.5i.
At this time, an error message in notification show OPPO_NV_BACKUP. The NV partition is invalid.
[IMG="Oppo NV Backup"]oppostyle.com/media/uploads/rma/22287/1469033216/Screenshot_2016-07-14-21-06-47-950.png
NO IMEI, INTERNAL STORAGE PROBLEM AND BASEBAND UNKNOW.
What is the problem man ?
Thank's a LOT !
Click to expand...
Click to collapse
I have make *#268# and in the engineer mode, calibrations statut, all it's -1.
In nv parameters, just calibration NV Backup file manual check failed. All is succeded.
go back to oppo forums or goolge and look for their unbrick tool. it should be a program with chinese characters. if you know what you are doing then connect wait and reboot. the rom installed should be a stock version of color os. if for any reason you are having issues with storage or connectivity try these steps. try re partitioning the device. if you can not do this try downloading an update 2.x.x ( side load it if you cant access storage or copy and paste to root of phone storage ) when you flash this itll give you the newer recovery with the option to merge the partition or not. at this step i would suggest doing a partition switch so sd card wont be an issue again. now as far as connectivity goes download coloros_modem_2.1.5i.zip you maybe able to find it via crdroid thread. flash via recovery right after rom before gapps, you should be functioning again
granted these steps helped me for my x9070
Hello,
I have resolved my problem with QPST and an NV Items backup.
All works fine.
Resolved.
@AlexCmb please help. I'm samilar same of you! i can't fix it.
Search for an NV items backup ans inject it with qpst.
AlexCmb said:
Search for an NV items backup ans inject it with qpst.
Click to expand...
Click to collapse
can you teamview to help? my facebook :https://www.facebook.com/luckystarofearth. i tried, i don't understand why until it workn't
Sorry but i don't have teamwiew. Do you try all method ?
AlexCmb said:
Sorry but i don't have skype. Do you try all method ?
Click to expand...
Click to collapse
please! inbox my facebook https://www.facebook.com/luckystarofearth.
i will show teamview. That will be easy than on forum...
and What did method you done??
I'm sorry but i'ts impossible for me because i don't have your phone in my hands man
jaer418 said:
go back to oppo forums or goolge and look for their unbrick tool. it should be a program with chinese characters. if you know what you are doing then connect wait and reboot. the rom installed should be a stock version of color os. if for any reason you are having issues with storage or connectivity try these steps. try re partitioning the device. if you can not do this try downloading an update 2.x.x ( side load it if you cant access storage or copy and paste to root of phone storage ) when you flash this itll give you the newer recovery with the option to merge the partition or not. at this step i would suggest doing a partition switch so sd card wont be an issue again. now as far as connectivity goes download coloros_modem_2.1.5i.zip you maybe able to find it via crdroid thread. flash via recovery right after rom before gapps, you should be functioning again
granted these steps helped me for my x9070
Click to expand...
Click to collapse
Sorry but i have try a lot of time the Sahara unbrick tool.
I have try many possibilities. But one resolved my problem because the NV items was deleted and my method was to backup the NV items of another Oppo Find 7 32go and reinject it with QPST (Qualcomm).
But i have the same IMEI of my friend backup.
AlexCmb said:
I'm sorry but i'ts impossible for me because i don't have your phone in my hands man
Click to expand...
Click to collapse
i can't backup imei of my friends! How to backup imei? Can you give me your file backup???
LuBu161 said:
i can't backup imei of my friends! How to backup imei? Can you give me your file backup???
Click to expand...
Click to collapse
Sorry man but it's impossible, i'm in the illegality with the IMEI of my friend, he know me but, i don't know you.
I search for edit the backup of my friend but i don't think so it works..
Are u in Europe ?
I'm VietNamese!
Oppo a33f nv backup
alexcmb said:
hello,
i have resolved my problem with qpst and an nv items backup.
All works fine.
Resolved.
Click to expand...
Click to collapse
can u send ur nv backup file
Oppo nv partition invalid
same problem here , i tried lot of methods , but nothing works, mobile carrier, wifi, bluetooth no more connections working, help me ,
thanks in advance
sahamax said:
same problem here , i tried lot of methods , but nothing works, mobile carrier, wifi, bluetooth no more connections working, help me ,
thanks in advance
Click to expand...
Click to collapse
Hello. I still have the same issue and unfortunately no backup of the NV partition.
I would be so happy if someone can send me a backup of the NV partition.
You can change the IMEI with an HEX-Editor to 999999999 for example before you send me your backup.
I am not interested in using your IMEI. I just want my phone working again. Thank you very much.
blindeshuhn said:
Hello. I still have the same issue and unfortunately no backup of the NV partition.
I would be so happy if someone can send me a backup of the NV partition.
You can change the IMEI with an HEX-Editor to 999999999 for example before you send me your backup.
I am not interested in using your IMEI. I just want my phone working again. Thank you very much.
Click to expand...
Click to collapse
Contact the guys at AndroidBrick.com they'll be able to help you out (they did for me when I was in your situation!) Lesson learned, always take a backup!
mikeysteele said:
Contact the guys at AndroidBrick.com they'll be able to help you out (they did for me when I was in your situation!) Lesson learned, always take a backup!
Click to expand...
Click to collapse
Thank you mikeysteel. I will try it and will give feedback.
A37f NV backup needed

How to restore IMEI numbers properly to Mi Max 3?

I have QCN backup of Mi Max 3 phone but I don't have EFS backup. And I lost EFS partitions. When I restore QCN backup to my phone, I can see IMEI numbers but phone cannot connect to GSM network. What can I do for my phone to connect GSM network again?
Thanks for help
Flash global version in miflash
Bartos81 said:
Flash global version in miflash
Click to expand...
Click to collapse
https://forum.xda-developers.com/mi-max-3/how-to/rom-official-recovery-fastboot-roms-mi-t3827503
Should I flash Fastboot image of this file?
MIUI 9 V9.6.6.0.OEDMIFD - Fastboot
Currently I have 9.6.7.0 and ARB is not activated yet. And I don't want to activeate ARB.
Can I flash fastboot image with miflash?
Flash only this it's on firmware package
Sent from my MI MAX 3 using XDA-Developers Legacy app
coolman7 said:
I have QCN backup of Mi Max 3 phone but I don't have EFS backup. And I lost EFS partitions. When I restore QCN backup to my phone, I can see IMEI numbers but phone cannot connect to GSM network. What can I do for my phone to connect GSM network again?
Thanks for help
Click to expand...
Click to collapse
I need QCN backup, can you share the file? thanks before
coolman7 said:
I have QCN backup of Mi Max 3 phone but I don't have EFS backup. And I lost EFS partitions. When I restore QCN backup to my phone, I can see IMEI numbers but phone cannot connect to GSM network. What can I do for my phone to connect GSM network again?
Thanks for help
Click to expand...
Click to collapse
Can you send us a link to your QCN file?I really need it to fix unknown baseband,and sometimes my Mac address is 02:00:00:00:00 ,and sim cards rarely work. I will not use your imei,i will change it to one that's written on my box. You can overwrite it with zero's also.
ghost baby said:
Can you send us a link to your QCN file?I really need it to fix unknown baseband,and sometimes my Mac address is 02:00:00:00:00 ,and sim cards rarely work. I will not use your imei,i will change it to one that's written on my box. You can overwrite it with zero's also.
Click to expand...
Click to collapse
Tell me exactly what happened to your phone. QCN will not solve your problem. If you use single SIM slot, there is a workaround and you can't use SIM1 and you can't use TF card slot, because SIM2 and TF card slot share slot.
coolman7 said:
Tell me exactly what happened to your phone. QCN will not solve your problem. If you use single SIM slot, there is a workaround and you can't use SIM1 and you can't use TF card slot, because SIM2 and TF card slot share slot.
Click to expand...
Click to collapse
I bought it second hand,with original box and working IMEI. Sometimes it has valid Mac address,and IMEI,but randomly (sometimes after restart) Mac address becomes 02:00:00:00 and IMEI is 0.Also when WiFi is working,after i switch it off,it won't turn on anymore(the switch is coming back to off state).I can post a link with screenshots and videos describing the issue.I tried flashing fastboot global ROM,but problem persisted.Also, baseband version is unkown.I think that EFS partition is corrupted,and i hope to fix it by flashing someone's working QCN file,while replacing both IMEIs with ones that came on the box.
Thank you for responding,and sorry for bad English.
Here is a thread describing a issue:
https://forum.xda-developers.com/mi-max-3/help/global-10-3-5-0-modem-crazy-upgrading-t3986377/page3
ghost baby said:
I bought it second hand,with original box and working IMEI. Sometimes it has valid Mac address,and IMEI,but randomly (sometimes after restart) Mac address becomes 02:00:00:00 and IMEI is 0.Also when WiFi is working,after i switch it off,it won't turn on anymore(the switch is coming back to off state).I can post a link with screenshots and videos describing the issue.I tried flashing fastboot global ROM,but problem persisted.Also, baseband version is unkown.I think that EFS partition is corrupted,and i hope to fix it by flashing someone's working QCN file,while replacing both IMEIs with ones that came on the box.
Thank you for responding,and sorry for bad English.
Here is a thread describing a issue:
https://forum.xda-developers.com/mi-max-3/help/global-10-3-5-0-modem-crazy-upgrading-t3986377/page3
Click to expand...
Click to collapse
EFS partitions seems to be corrupted. Restoring QCN will not help. You need to find original EFS and restore.
If you can't find original EFS, you may try this but it may not solve your problems:
1) Backup current EFS partitions
2) Backup QCN with QPST
3) Change IMEI 1 as 0 inside QCN file, IMEI 2 as original IMEI 2
4) Erase EFS partitions
5) Reset phone to factory defaults
6) Check if IMEI is null
7) Restore modified QCN with QPST
8) Reboot phone
9) Check IMEI numbers
10) Check baseband
11) Use SIM 2 slot, don't use SIM 1 slot
I hope this will help
coolman7 said:
EFS partitions seems to be corrupted. Restoring QCN will not help. You need to find original EFS and restore.
If you can't find original EFS, you may try this but it may not solve your problems:
1) Backup current EFS partitions
2) Backup QCN with QPST
3) Change IMEI 1 as 0 inside QCN file, IMEI 2 as original IMEI 2
4) Erase EFS partitions
5) Reset phone to factory defaults
6) Check if IMEI is null
7) Restore modified QCN with QPST
8) Reboot phone
9) Check IMEI numbers
10) Check baseband
11) Use SIM 2 slot, don't use SIM 1 slot
I hope this will help
Click to expand...
Click to collapse
Thank you, I'll try tonight after school and post results here. Do you or someone have original EFS partition so i could restore it using TWRP? Thanks for your help so far.
ghost baby said:
Thank you, I'll try tonight after school and post results here. Do you or someone have original EFS partition so i could restore it using TWRP? Thanks for your help so far.
Click to expand...
Click to collapse
I don't have.
ghost baby said:
Thank you, I'll try tonight after school and post results here. Do you or someone have original EFS partition so i could restore it using TWRP? Thanks for your help so far.
Click to expand...
Click to collapse
Hi! did you manage to solve this? i am having the exact same issue as you
diegoocampo said:
Hi! did you manage to solve this? i am having the exact same issue as you
Click to expand...
Click to collapse
No,i tried everything besides restoring EFS and doing a EDL flash. I haven't found anyone who could send me their valid EFS backup,but I don't think this will solve the issue as it didn't on @DoYouWantFriesWithThat phone.I went to some local phone repair shops and they said that they're 90% sure it's a hardware issue.One thing i noticed is that it works a lot better on MIUI Global 10.0.1.0(OEDMIFH) than any other ROM,but it's just my observation. Ill try tonight to heat it's sgl around 80-90 degrees Celsius and see if it makes a difference (the guy at repair shop recommend it to me).
---------- Post added at 06:58 PM ---------- Previous post was at 06:58 PM ----------
diegoocampo said:
Hi! did you manage to solve this? i am having the exact same issue as you
Click to expand...
Click to collapse
No,i tried everything besides restoring EFS and doing a EDL flash. I haven't found anyone who could send me their valid EFS backup,but I don't think this will solve the issue as it didn't on @DoYouWantFriesWithThat phone.I went to some local phone repair shops and they said that they're 90% sure it's a hardware issue.One thing i noticed is that it works a lot better on MIUI Global 10.0.1.0(OEDMIFH) than any other ROM,but it's just my observation. Ill try tonight to heat it's sgl around 80-90 degrees Celsius and see if it makes a difference (the guy at repair shop recommend it to me).
---------- Post added at 06:58 PM ---------- Previous post was at 06:58 PM ----------
diegoocampo said:
Hi! did you manage to solve this? i am having the exact same issue as you
Click to expand...
Click to collapse
No,i tried everything besides restoring EFS and doing a EDL flash. I haven't found anyone who could send me their valid EFS backup,but I don't think this will solve the issue as it didn't on @DoYouWantFriesWithThat phone.I went to some local phone repair shops and they said that they're 90% sure it's a hardware issue.One thing i noticed is that it works a lot better on MIUI Global 10.0.1.0(OEDMIFH) than any other ROM,but it's just my observation. Ill try tonight to heat it's sgl around 80-90 degrees Celsius and see if it makes a difference (the guy at repair shop recommend it to me).
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
diegoocampo said:
Hi! did you manage to solve this? i am having the exact same issue as you
Click to expand...
Click to collapse
No,i tried everything besides restoring EFS and doing a EDL flash. I haven't found anyone who could send me their valid EFS backup,but I don't think this will solve the issue as it didn't on @DoYouWantFriesWithThat phone.I went to some local phone repair shops and they said that they're 90% sure it's a hardware issue.One thing i noticed is that it works a lot better on MIUI Global 10.0.1.0(OEDMIFH) than any other ROM,but it's just my observation. Ill try tonight to heat it's sgl around 80-90 degrees Celsius and see if it makes a difference (the guy at repair shop recommend it to me).
---------- Post added at 06:59 PM ---------- Previous post was at 06:59 PM ----------
diegoocampo said:
Hi! did you manage to solve this? i am having the exact same issue as you
Click to expand...
Click to collapse
No,i tried everything besides restoring EFS and doing a EDL flash. I haven't found anyone who could send me their valid EFS backup,but I don't think this will solve the issue as it didn't on @DoYouWantFriesWithThat phone.I went to some local phone repair shops and they said that they're 90% sure it's a hardware issue.One thing i noticed is that it works a lot better on MIUI Global 10.0.1.0(OEDMIFH) than any other ROM,but it's just my observation. Ill try tonight to heat it's sgl around 80-90 degrees Celsius and see if it makes a difference (the guy at repair shop recommend it to me).
Thanks! @ghost baby please leave an update if you get any results. I will also keep trying things!
@ghost baby by the way, i did try doing a EDL flash, and that didn't fix anything. I think EDL flash doesn't touch EFS partition so it is still corrupt. For me restoring a EFS partition is the only alternative left.
coolman7 said:
EFS partitions seems to be corrupted. Restoring QCN will not help. You need to find original EFS and restore.
If you can't find original EFS, you may try this but it may not solve your problems:
1) Backup current EFS partitions
2) Backup QCN with QPST
3) Change IMEI 1 as 0 inside QCN file, IMEI 2 as original IMEI 2
4) Erase EFS partitions
5) Reset phone to factory defaults
6) Check if IMEI is null
7) Restore modified QCN with QPST
8) Reboot phone
9) Check IMEI numbers
10) Check baseband
11) Use SIM 2 slot, don't use SIM 1 slot
I hope this will help
Click to expand...
Click to collapse
I done Exactly all Steps.Modified a QCN BAckup from Friends Phone via Hex-Edit and Imei Calculator....
Also i tryed Flashing NON-HLOS.Bin and persist.img....
Tryed with EFS Backup from Same phone from a friend....
And flashing original China and Global ROM...i really tryed all what i found in Google....
QPST helped me to get my IMEI and Baseband back.
But Sim was not working.I tryed much hours all things.... i sended it back .they tryed it with EDL-Mode Flashing and nothing happend.
It endet that the Device is shipped to China (guarantee)....
I lost my Baseband and Imei after flashing Custom Kernel .And went back to normal Kernel....then the problem was still Present.
I tried heating it's motherboard with hair dryer and it haven't worked. I think that persist and NON-HLOS.bin are flashed using fastboot rom. It seems like hardware issue,and I'll be selling my phone for replacement parts. I don't have more energy and time to spend on this crap.
For all of you having issues,i fixed it. I removed it's motherboard completely(also i removed cameras and front flash rubber),and put it on aluminum foil and left it in the 200° heated baking oven for exactly 8:30 minutes. And after that,turned heating off and left oven opened and board in there to allow it to cool down about 40 minutes. After booting ,the phone connection worked and allowed me to OTA update from Global Stable 10.3.5.0 PEDMIXM to Global Stable 11.0.6 PEDMIXM that just came out.
I think that the heating fixed the problem,and i advise you to it as last resort,as it may leave your motherboard unusable.
First try to flash global stable 10.3.5.0 and update it to the latest version,and please tell me your result so i can indentify what the problem was.
Thanks for your support so far.sglg
ghost baby said:
For all of you having issues,i fixed it. I removed it's motherboard completely(also i removed cameras and front flash rubber),and put it on aluminum foil and left it in the 200° heated baking oven for exactly 8:30 minutes. And after that,turned heating off and left oven opened and board in there to allow it to cool down about 40 minutes. After booting ,the phone connection worked and allowed me to OTA update from Global Stable 10.3.5.0 PEDMIXM to Global Stable 11.0.6 PEDMIXM that just came out.
I think that the heating fixed the problem,and i advise you to it as last resort,as it may leave your motherboard unusable.
First try to flash global stable 10.3.5.0 and update it to the latest version,and please tell me your result so i can indentify what the problem was.
Thanks for your support so far.sglg
Click to expand...
Click to collapse
I'm going to try your method as my last resort. Will update. Keep your fingers crossed
Do you have a Xiaomi service center nearby? This happened to me last time and they just factory flashed my phone so it was like the first time it came out of the box. Luckily had my warranty still at that point. Else, it would have been around $35. They didn't mind that the phone is rooted and whatnot.

Dual IMEI Fix

If anyone find how to fix dual imei then please reply ...i bricked my phone by installing boot logo of corvus rom in miui then i repair my phone with sp flash tool but unfortunately i click on format-all+download
Then my phones bootloader got lock,imei lost,wifi mac address lost, Bluetooth address lost but i repair all except imei 1,imei 2 means sim 2 work after writing imei in miui meta tool but sim 1 is not fixed even if we write sim 1 imei in miui meta tool we got nvdata error in official miui and also not worked in engineering rom..so at all please if someone fixed or know how to fix please reply...
You can fix imei 2 using meta maui.you have lots of videos that show you how to do it. I had the same problem.now imei 1 is null(not working) but imei 2 is ok.the only way for us to fix them both is to get a twrp backup from a working phone of the files nvdata,nvram,nvcfg,persist, protect_s,protect_f. Then restore them and change both imei.
ariber14 said:
You can fix imei 2 using meta maui.you have lots of videos that show you how to do it. I had the same problem.now imei 1 is null(not working) but imei 2 is ok.the only way for us to fix them both is to get a twrp backup from a working phone of the files nvdata,nvram,nvcfg,persist, protect_s,protect_f. Then restore them and change both imei.
Click to expand...
Click to collapse
Bro i also try this also but nothing happened even imei 2 will not also work with that method
[email protected]íR [email protected]Ñ said:
Bro i also try this also but nothing happened even imei 2 will not also work with that method
Click to expand...
Click to collapse
It does work man. I had the same problem. Now only imei 2 works. I cant find backup files i mentioned above
ariber14 said:
It does work man. I had the same problem. Now only imei 2 works. I cant find backup files i mentioned above
Click to expand...
Click to collapse
Bro listen I backup nvram and nvdata from custom recovery of other phone but when I restore it to my phone nvdata successfully restored but nvram is not restoring showing error then I flash engeenering rom then restore in that rom both successfully restore but no imei is working and if I go to miui official then nvdata corrupted error.... What method r you telling bro if you have different one
[email protected]íR [email protected]Ñ said:
Bro listen I backup nvram and nvdata from custom recovery of other phone but when I restore it to my phone nvdata successfully restored but nvram is not restoring showing error then I flash engeenering rom then restore in that rom both successfully restore but no imei is working and if I go to miui official then nvdata corrupted error.... What method r you telling bro if you have different one
Click to expand...
Click to collapse
you flash eng. rom. then got to fastboot, delete nvram,nvdata. using meta maui you can put ONLY imei2 (press write about 5 times then wait 1 minute before disconecting maui..) start the phone and check if imei 2 is working. at this part you can even flash twrp and make backup of files to use them later. the important thing is while being on eng rom, to make imei 2 working and showng active. then flash stock rom,avoid flashing stock nvdata. right after flashing,enter fastboot and flash backup nvdata. if it wont allow you to flash nvram(check if its from a rn8p phone) then flash twrp,mount nvram,nvdata,nvcfg and flash the backups from there.there are lots of combinations.
ariber14 said:
you flash eng. rom. then got to fastboot, delete nvram,nvdata. using meta maui you can put ONLY imei2 (press write about 5 times then wait 1 minute before disconecting maui..) start the phone and check if imei 2 is working. at this part you can even flash twrp and make backup of files to use them later. the important thing is while being on eng rom, to make imei 2 working and showng active. then flash stock rom,avoid flashing stock nvdata. right after flashing,enter fastboot and flash backup nvdata. if it wont allow you to flash nvram(check if its from a rn8p phone) then flash twrp,mount nvram,nvdata,nvcfg and flash the backups from there.there are lots of combinations.
Click to expand...
Click to collapse
Bro i understand what r you telling let me snd you these backups of working phone of my friend that is also redmi note 8 pro then I will see what you will do in your phone for Working both imei..
[email protected]íR [email protected]Ñ said:
Bro i understand what r you telling let me snd you these backups of working phone of my friend that is also redmi note 8 pro then I will see what you will do in your phone for Working both imei..
Click to expand...
Click to collapse
Ok thanks.and let me know whan you did with your imei.
ariber14 said:
Ok thanks.and let me know whan you did with your imei.
Click to expand...
Click to collapse
Bro where I will snd these backups to you... Also these backups are from recovery
from recovery is fine
te send them,you can put them on a folder to google drive and make that folder shared by sending the link. or we can use share me appclication.there are lots of ways. or you can send them through email. choose whatever you like

Categories

Resources