my htc desire 616 dual sim got stuck at the logo. i tried to start it many time but its still the same. then i decide to flash it but its not even detected in the sp flash tool, only the phone shows charging. I have installed the vcom drivers manually but still the phone is not detected in the sp flash tool. I want my phone to be switched on. sombody please help me
same problem here too. have no idea what to do. please help. i've been searching for almost 2 days with no result.
---------- Post added at 10:24 AM ---------- Previous post was at 09:52 AM ----------
same problem here too. have no idea what to do. please help. i've been searching for almost 2 days with no result.
masterdragon21 said:
same problem here too. have no idea what to do. please help. i've been searching for almost 2 days with no result.
---------- Post added at 10:24 AM ---------- Previous post was at 09:52 AM ----------
same problem here too. have no idea what to do. please help. i've been searching for almost 2 days with no result.
Click to expand...
Click to collapse
Fixed the issue. You can use spflash tool to unbrick it. Don't forget to install all drivers for the tool. You may need to use workaround to install drivers as most of them are unsigned.
Related
Like the title states I'm stuck on the splash screen. What makes my problem a little tricky is that I can not access recovery and I can not use odin, because the samsung drivers are not installed and will not install until I plug in a booted samsung phone into my computer to prompt the driver install. So, unless there is a way to install the drivers without plugging in the phone or another way to flash cwm (which i lost on a bad rom flash) I am really screwed. Please any help I can get would be greatly appreciated!!
____________________________________________
update: Sprint ended up just giving me a new phone at no charge! problem solved I guess. thanks for everyone's help
Navigate to where you have the drivers on comp. Open the file and look for the one ending in .exe click it and install manually. That should let your comp see your phone.
---------- Post added at 11:50 AM ---------- Previous post was at 11:48 AM ----------
If you don't have the driver package search Samsung kies download drivers and use above instructions.
Heres a link for the drivers.
---------- Post added at 02:01 PM ---------- Previous post was at 01:58 PM ----------
[/COLOR]Heres a link for the drivers. Make sure to unzip first then install. http://www.mitsdrivers.com/pages_epic-touch-4g-drivers.html#
Happened to me once. Just held down Vol up and Power button for a long time and eventually is was able to load itself.
So, I am a victim of the McAfee killswitch. I rooted my phone, then unlocked bootloader, but I made a mistake and had to flash kdz. For some reason, the kdz i downloaded was locked in mcaffee, so i really struggled but managed to install twrp, and of course root. The phone worked fine for a long time, but then I messed up and got a bootloop. The thing is, my killswitch is engaged now, so I can't just go into TWRP and wipe, or go into download mode. Both locked. And if i try to boot normally I just get the loop... So my questions are: Is there a way to get into TWRP directly (without having to confirm, phone could reboot to recovery just fine). Or just flash kdz, i don't know, anything. ADB shows device offline and sometimes unathorized, fastboot doesn't detect it. LG service said it will only fixed if i replace everything. Any help?
Sounds like you need togoba I to stock using lg flash tool
---------- Post added at 03:13 PM ---------- Previous post was at 03:05 PM ----------
ToRt1sher said:
So, I am a victim of the McAfee killswitch. I rooted my phone, then unlocked bootloader, but I made a mistake and had to flash kdz. For some reason, the kdz i downloaded was locked in mcaffee, so i really struggled but managed to install twrp, and of course root. The phone worked fine for a long time, but then I messed up and got a bootloop. The thing is, my killswitch is engaged now, so I can't just go into TWRP and wipe, or go into download mode. Both locked. And if i try to boot normally I just get the loop... So my questions are: Is there a way to get into TWRP directly (without having to confirm, phone could reboot to recovery just fine). Or just flash kdz, i don't know, anything. ADB shows device offline and sometimes unathorized, fastboot doesn't detect it. LG service said it will only fixed if i replace everything. Any help?
Click to expand...
Click to collapse
Try flashing back to stock rom using lg flashtool
moswald1978 said:
Sounds like you need togoba I to stock using lg flash tool
---------- Post added at 03:13 PM ---------- Previous post was at 03:05 PM ----------
Try flashing back to stock rom using lg flashtool
Click to expand...
Click to collapse
I can't access download mode, so I guess flashtool is not an option.
ToRt1sher said:
I can't access download mode, so I guess flashtool is not an option.
Click to expand...
Click to collapse
Try using the kHz method if your computer will reconize your phone. Use LG flashtool 2014 it will put your phone in download mode for you
---------- Post added at 06:06 PM ---------- Previous post was at 06:05 PM ----------
moswald1978 said:
Try using the kHz method if your computer will reconize your phone. Use LG flashtool 2014 it will put your phone in download mode for you
Click to expand...
Click to collapse
Kdz
How will it put my phone into download mode? If i click start, it says the phone is not connected to the computer. My computer can see the device as ADB device, but only offline or unauthorized.
When I used it my phone was stuck on the LG screen. Flashtool found my device and started the upgrade then it booted my phone into download mode
That does not work for me.. The program is stuck at 60% and telling me phone is not connected.
The only other option I can think of would be to a hard factory reset. Make sure your phone is off then hold down power and volume down together when the LG logo appears keep holding them. It should take you to that menu
I already said I can't go into recovery like that, because there is a killswitch activated on my phone.
ToRt1sher said:
So, I am a victim of the McAfee killswitch. I rooted my phone, then unlocked bootloader, but I made a mistake and had to flash kdz. For some reason, the kdz i downloaded was locked in mcaffee, so i really struggled but managed to install twrp, and of course root. The phone worked fine for a long time, but then I messed up and got a bootloop. The thing is, my killswitch is engaged now, so I can't just go into TWRP and wipe, or go into download mode. Both locked. And if i try to boot normally I just get the loop... So my questions are: Is there a way to get into TWRP directly (without having to confirm, phone could reboot to recovery just fine). Or just flash kdz, i don't know, anything. ADB shows device offline and sometimes unathorized, fastboot doesn't detect it. LG service said it will only fixed if i replace everything. Any help?
Click to expand...
Click to collapse
I guess it will be very hard to flash KDZ or TOT cause you need to put your phone to download mode or need to connect ADB. following the post.
ToRt1sher said:
I already said I can't go into recovery like that, because there is a killswitch activated on my phone.
Click to expand...
Click to collapse
did you ever find a solution ?
x000x said:
did you ever find a solution ?
Click to expand...
Click to collapse
No, that's why I asked for help here.
Any news guys? Did somebody find a solution to the killswitch problem?
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 try this follow step bye step works on most models
---------- Post added at 10:10 AM ---------- Previous post was at 10:04 AM ----------
This is a cure all for just about all bricks
---------- Post added at 10:50 AM ---------- Previous post was at 10:10 AM ----------
ToRt1sher said:
No, that's why I asked for help here.
Click to expand...
Click to collapse
It may seem hard but its really not
TheMadScientist420 said:
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359 try this follow step bye step works on most models
---------- Post added at 10:10 AM ---------- Previous post was at 10:04 AM ----------
This is a cure all for just about all bricks
---------- Post added at 10:50 AM ---------- Previous post was at 10:10 AM ----------
It may seem hard but its really not
Click to expand...
Click to collapse
You saved me, thanks a lot!!!
I was on CyanogenMod 12 and wanted to upgrade using the LG Fash Tool with the Marshmellow kdz. But apparently this method is far from beeing safe. On my computer setup (Windows 10) it doesnt seem to finish the upgrade procedure. I am stuck at 11% with 45 minutes already passed. The progress bar on my phone went from 1% to 2% and then back to 1% again. Before I tried to exit download mode which also didnt work. So what can I do now? Is my phone bricked because LG Flash Tool doesnt work correctly?
Edit:
Now I restarted the update procedure and I am stuck at 12% after 20 minutes, so how long is that supposed to take? I am used to Samsung where it takes seconds to upgrade the firmware.
Edit2:
I left it alone, after 50 minutes its a 15% on the computer but at 2% on the phone display, is this normal?!?!
No not normal. Appears to be a problem relating to Win 10. I had the same and fortunately I have a Laptop with Win 8.1 so was able to do the upgrade. I suggest that you try and get access to a PC/Laptop running Win 7/8 or 8.1 and you will resurrect you phone.
Stransky
Sent from my iPad using Tapatalk
I am facing same problem on Windows 10, flash is stuck at 12% since 1 hr. Can you please confirm if windows 8/7 fixed your problem?
Hi, i get my bricked g3 (9008 qhusb) repaired with win10 64 bit two days ago.
So i see no reason why win 7 or 8 should could be work with tools that win10 can not handle.
Try with right click compatibility and start as win7 and admin. Every tool works with that.
To unbrick it was possible to start tools from 2002.
---------- Post added at 11:40 AM ---------- Previous post was at 11:38 AM ----------
kapilgreat said:
I am facing same problem on Windows 10, flash is stuck at 12% since 1 hr. Can you please confirm if windows 8/7 fixed your problem?
Click to expand...
Click to collapse
at 12 % the tool is trying to boot the DL mode.
But it looks there are Probs with your laf partition.
Is a recovery on this phone in which you couls boot?
If not try lg flash tool. this one with port 41 to use.
---------- Post added at 11:49 AM ---------- Previous post was at 11:40 AM ----------
Try the repair function with the lg mobile tool. If that doenst work, you get soft bricked.
But no trouble, i can post you tools to unbrick.
konsolen said:
Hi, i get my bricked g3 (9008 qhusb) repaired with win10 64 bit two days ago.
So i see no reason why win 7 or 8 should could be work with tools that win10 can not handle.
Try with right click compatibility and start as win7 and admin. Every tool works with that.
To unbrick it was possible to start tools from 2002.
---------- Post added at 11:40 AM ---------- Previous post was at 11:38 AM ----------
at 12 % the tool is trying to boot the DL mode.
But it looks there are Probs with your laf partition.
Is a recovery on this phone in which you couls boot?
If not try lg flash tool. this one with port 41 to use.
---------- Post added at 11:49 AM ---------- Previous post was at 11:40 AM ----------
Try the repair function with the lg mobile tool. If that doenst work, you get soft bricked.
But no trouble, i can post you tools to unbrick.
Click to expand...
Click to collapse
my phone is soft brick. It is showing firmware upgrade screen when phone is turned on.
you tried with lg flash tool? the one which used port 41 and tot file?
konsolen said:
you tried with lg flash tool? the one which used port 41 and tot file?
Click to expand...
Click to collapse
yes i tried lg flash tool with tot file. it is also failing after 11% with error:
20:17:26] RX Timeout : 5000 seconds
[20:17:26] LAF_Packet Error, Error reason is 0
[20:17:26] We can't communicate with Phone[WRTE_Packet]
I am using KitKAt tot file, not able to file .tot file for lollipop. Not sure if this is the reason. I was on cloudy g3 2.5.
I able use flash tool 2014 to flash MM.kdz.
Many time failed to flash , and I search , for MM setting phone mode must use CS emergency not DIAG.
After that I finished my flashing and get MM.
Hope this help.
fOxunO said:
I able use flash tool 2014 to flash MM.kdz.
Many time failed to flash , and I search , for MM setting phone mode must use CS emergency not DIAG.
After that I finished my flashing and get MM.
Hope this help.
Click to expand...
Click to collapse
Issue is fixed after i switched to Win 7. I managed to install stock MM.
perfect. congrats!
Plz help....it all happend while i done after unbricking from usb logo....now it only shows 4 color...rectangle
Me too same problem..
quadeur06 said:
Me too same problem..
Click to expand...
Click to collapse
upload xFSTK log file. it will be on desktop
---------- Post added at 03:14 PM ---------- Previous post was at 03:13 PM ----------
saguntankar said:
Plz help....it all happend while i done after unbricking from usb logo....now it only shows 4 color...rectangle
Click to expand...
Click to collapse
upload xFSTK log file. it will be on desktop
Read through this. http://forum.xda-developers.com/showthread.php?t=3452785
Sent from my ASUS_Z00AD using Tapatalk
+1 ... can´t enter recovery, but Android is working fine.
See my post
[Solved] [HELP] First Boot four color [Solved]
http://forum.xda-developers.com/zenfone2/help/help-boot-four-color-t3375935
Thanks for your attempts
cl3i550nBR said:
See my post
[Solved] [HELP] First Boot four color [Solved]
http://forum.xda-developers.com/zenfone2/help/help-boot-four-color-t3375935
Click to expand...
Click to collapse
My phone is all in stuck with 4 color...my computer finds it hard to detect...no way to detect by computer..so nnon of them could work.
my xFstk log was deleted by mistake and now there is no detection in computer....plz help...
Hello everyone. I have a problem with my lenovo vibe k5 plus. When I turn it on, I can see lenovo logo and then it reboot again. It repeat forever. I didn't use custom room and my phone wasn't root. Can anyone help me? Sorry for my bad english.
v7676uy said:
Hello everyone. I have a problem with my lenovo vibe k5 plus. When I turn it on, I can see lenovo logo and then it reboot again. It repeat forever. I didn't use custom room and my phone wasn't root. Can anyone help me? Sorry for my bad english.
Click to expand...
Click to collapse
The same problem with my device and have not found a solution
Please help me pm telegram @ muzz17
---------- Post added at 06:42 PM ---------- Previous post was at 06:35 PM ----------
Syara said:
The same problem with my device and have not found a solution
Please help me pm telegram @ muzz17
Click to expand...
Click to collapse
3 files stock rom successfully downloaded via qfil but still the same
I continue to install twrp via fastboot also successfully but still not enter recovery mode
What method should I do to get my device back to normal
Syara said:
The same problem with my device and have not found a solution
Please help me pm telegram @ muzz17
---------- Post added at 06:42 PM ---------- Previous post was at 06:35 PM ----------
3 files stock rom successfully downloaded via qfil but still the same
I continue to install twrp via fastboot also successfully but still not enter recovery mode
What method should I do to get my device back to normal
Click to expand...
Click to collapse
Do you think the problem is EMMC IC was damaged?
v7676uy said:
Do you think the problem is EMMC IC was damaged?
Click to expand...
Click to collapse
Yes it is possible: rolleyes:
I think you should go to lenovo care. In past I also faced this issue. And they solved my problem.