I'll tell the whole thing briefly and clearly, so here it goes:
I was running OxygenOS 3.2.6
Flashed Resurrection Remix ROM with RR kernel
While installing RR, I accidentally set up "Require pattern at startup to receive calls etc." thing. The ROM was working fine.
I then had to go back to OOS for some important files, so I went to recovery and restored the Nandroid backup I had made before flashing RR.
The problem now is, I can't get rid of the encryption password. I have to draw the pattern every time the phone boots up.
I have tried:
Selecing 'None' in security options to wipe out all settings
Selected new pattern and selected "no" at the option of requiring pattern at boot
Done the same with PIN
Selected PIN and also selected the option to require PIN at startup, hoping that it will overwrite the previous pattern setting.
None has worked.. I tried reinstalling RR but then it goes into bootloop (optimizes 124 apps first, phone reboots and from second time on, it just would optimize 29 apps over and over and reboot again and again (have waited 25 minutes approx., it's surely a bootloop).
Restored Nandroid OOS 3.2.6, and even dirty flashed OOS 3.2.7 full ROM over it, no good so far.
Someone help, thanks in advance!
PS: There's this weird option also that has popped up in Display settings too! I'm attaching screenshot. If someone can help me figure out :/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gineetmehta said:
I'll tell the whole thing briefly and clearly, so here it goes:
I was running OxygenOS 3.2.6
Flashed Resurrection Remix ROM with RR kernel
While installing RR, I accidentally set up "Require pattern at startup to receive calls etc." thing. The ROM was working fine.
I then had to go back to OOS for some important files, so I went to recovery and restored the Nandroid backup I had made before flashing RR.
The problem now is, I can't get rid of the encryption password. I have to draw the pattern every time the phone boots up.
I have tried:
Selecing 'None' in security options to wipe out all settings
Selected new pattern and selected "no" at the option of requiring pattern at boot
Done the same with PIN
Selected PIN and also selected the option to require PIN at startup, hoping that it will overwrite the previous pattern setting.
None has worked.. I tried reinstalling RR but then it goes into bootloop (optimizes 124 apps first, phone reboots and from second time on, it just would optimize 29 apps over and over and reboot again and again (have waited 25 minutes approx., it's surely a bootloop).
Restored Nandroid OOS 3.2.6, and even dirty flashed OOS 3.2.7 full ROM over it, no good so far.
Someone help, thanks in advance!
PS: There's this weird option also that has popped up in Display settings too! I'm attaching screenshot. If someone can help me figure out :/
Click to expand...
Click to collapse
Perform a full wipe and clean installation
LS.xD said:
Perform a full wipe and clean installation
Click to expand...
Click to collapse
You mean internal storage as well?
gineetmehta said:
You mean internal storage as well?
Click to expand...
Click to collapse
The encrypted partition is "data".
Internal storage is a subfolder of "data" called "media".
So --> yes
I would set up the system from scratch, as it probably costs less time then trying to "fix" your running system. I try to avoid using backups if its not totally necessary.
Related
Hello.
So, my Tab has been working great for a while, with magisk and TWRP installed, today i thought i would upgrade magisk, so i did, both the manager and flashed the latest zip (directly in manager). Happy as can be, i rebooted the tab only to see it now boots up with a broken/distorted samsung logo, and it just keeps on trying booting, but never actually starts up.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So what im wondering, is there any way to save my tab without deleting everything? I have spent a fair amount of time setting it up, just the way i want it. (I can still boot into TWRP, and taking a backup of everything to my sdcard while writing this)
I tried unsu.zip it removed magisk, but still did not help.
Would it be enough to flash this with odin? (seems i cant copy files to device with usb in twrp)
Originak Marshmallow bootloader (I am on 6.0.1)
T800
T800XXU1CPI2
Edit: Flashing bootloader downloaded from xda did not work, "invalid bootloader" message in Odin
Edit2: Bit the bullet and flashed stock in odin, works fine now.
speedweed said:
Hello.
So, my Tab has been working great for a while, with magisk and TWRP installed, today i thought i would upgrade magisk, so i did, both the manager and flashed the latest zip (directly in manager). Happy as can be, i rebooted the tab only to see it now boots up with a broken/distorted samsung logo, and it just keeps on trying booting, but never actually starts up.
So what im wondering, is there any way to save my tab without deleting everything? I have spent a fair amount of time setting it up, just the way i want it. (I can still boot into TWRP, and taking a backup of everything to my sdcard while writing this)
I tried unsu.zip it removed magisk, but still did not help.
Would it be enough to flash this with odin? (seems i cant copy files to device with usb in twrp)
Originak Marshmallow bootloader (I am on 6.0.1)
T800
T800XXU1CPI2
Edit: Flashing bootloader downloaded from xda did not work, "invalid bootloader" message in Odin
Edit2: Bit the bullet and flashed stock in odin, works fine now.
Click to expand...
Click to collapse
Delete Magisk from twrp and flash the previous one that worked correctly
Hi,
i have a problem with my p2 i try to install lineage os but to install it i need to install twrp and that's okay but i restart the phone and now i have a bootloop on twrp
And the message :
failed to unmount '/data' invalid argument...
and i can't stop the phone and do nothing...
Can you help me please
Fangstergangsta said:
Hi,
i have a problem with my p2 i try to install lineage os but to install it i need to install twrp and that's okay but i restart the phone and now i have a bootloop on twrp
And the message :
failed to unmount '/data' invalid argument...
and i can't stop the phone and do nothing...
Can you help me please
Click to expand...
Click to collapse
Wipe everything. Then, Change data partition to ext4. Then, flash treble enabled LOS twrp first, then LOS 15.1 or 16
Miltonbaidya88 said:
Wipe everything. Then, Change data partition to ext4. Then, flash treble enabled LOS twrp first, then LOS 15.1 or 16
Click to expand...
Click to collapse
i can't do nothing, the phone reboot, go to twrp, display the error message and again reboot and i can't navigate into the twrp menues during the error message is displayed
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.noelshack.com/2018-44-3-1540986051-20181031-123429.jpg
i find this to force reinstallation twrp but i work only with flashable zip but i can't find a flashable zip for kuntao:
https://forum.xda-developers.com/showthread.php?t=2383148
EDIT: Now i can go to twrp and i have flashed to ext4 now but i don't know what you want to do for:
"flash treble enabled LOS twrp first"
i have the same, one problem after i was flashing twrp. now i want to restore original rom, (i make a backup before to clean everythingh). I go to restore page, in the end i have message: restore ok, i restart, and after that appear logo lenovo, and finally, its going to bootloader page. it's not starting android system, everytime, restarting to this page (but in twrp after restore he say restoreOK). please, how i can restore in a good way, or maybe how i can install a new fresh rom ( i download one zip file from this site, for lenovo p2) without help of twrp, or with twrp but say no possible to install zip file.
I have the same problem when i flash lineage 16 and reboot it strts for a second then a pop up message show "type your password" then automatically boot in twrp and i was unable to restore for the backup caused bootloops....its my luck twrp working fine and i was able to flash the previous rom again without backup...
Can anyone help me to flash lineage 16 i have the same problem while flashing gsi rom...
Plzzz help me...
---------- Post added at 02:03 PM ---------- Previous post was at 01:39 PM ----------
ramymona said:
i have the same, one problem after i was flashing twrp. now i want to restore original rom, (i make a backup before to clean everythingh). I go to restore page, in the end i have message: restore ok, i restart, and after that appear logo lenovo, and finally, its going to bootloader page. it's not starting android system, everytime, restarting to this page (but in twrp after restore he say restoreOK). please, how i can restore in a good way, or maybe how i can install a new fresh rom ( i download one zip file from this site, for lenovo p2) without help of twrp, or with twrp but say no possible to install zip file.
Click to expand...
Click to collapse
Try to flash treble recovery for lenovo p2 twrp3.2.2-20180709kunato and clear all partition except internal and sd card then try to flash the rom...it should work
Finaly, i was at one service, and that guy make my lenovo to start again normaly, probably was using my backup file, but now everythingh is ok, excepting sim card. not working, even with sim inside, say: no simcard inserted... probably, the file with modem firmware, canceled... the guy from service tell me he cannot solve the problem. i was at another service, but they say need one week to check. Somebody can help me with this new problem? thanks.
What I've got:
T800 (wifi) updated by mfg. NOT rooted, all is stock (new in 2015 and I've never messed with the OS) and last version was marshmallow 6.0.1 (def marshmallow but version is strictly from memory).
Problem:
Couple of days ago, tab went into endless boot. It would show the android screen then samsung screen then it would load and all looked ok. This would last for maybe 30 seconds then rebooted into the android screen then samsung screen etc. : endless loop.
What I did:
Did some research and booted into recovery mode. Only cleared the cache then rebooted/or shutdown several times. Same looping. Tried cache clear 3-4x with no success. Once I got into the desktop, it lasted ~30 seconds and then booted me out again.
Alright, I bit the bullet and did a factory reset. Well, now it only gives me the android screen and then the samsung screen. Then cycles over again. I cannot get to the desktop anymore, at all.
Found a thread regarding looping but then the threads about upgrading to nougat by @Schischu --> https://forum.xda-developers.com/galaxy-tab-s/development/rom-android-7-nougat-t3449078 then part 2 https://forum.xda-developers.com/galaxy-tab-s/development/rom-t3498956 and then another one by someone else in regards to upgrading past 7.0 (which I'm not ready to do).
The instructions as posted
INSTALLATION INSTRUCTIONS
Cleaning System
This step is only necessary on the initial installation.
Reboot into recovery. Go into wipe menu. Select "Advanced Wipe". Check
Dalvik Cache
System
Cache
Data
and wipe them. Don't reboot just yet.
Install this ROM
Go into Install
Flash aosp-XXX.zip
On initial installation it is necessary to Reboot to Recovery. Don't skip this step!
(E:unknown command [log] messages can be ignored.)
Install Google Apps and SuperSU
Go into Install
Flash GAPPS.zip
Flash SuperSU.zip
Reboot to System
Click to expand...
Click to collapse
I've got a few questions as I am a TOTAL newb at this.
1)I've got the following files:
a) aosp_chagallwifi-userdebug-20161116.zip
b) open_gapps-arm-7.0-nano-20191002.zip
c) SuperSU-v2.82-20170528234214-TEST-1.zip
d)twrp_3.0.3-1_sm-t800_10217.tar
Are these the correct files? Do I need any more?
2)when I start the process, do I need to put the ZIP file on an SD card then insert that in the tab?
OR do I unzip the file and put that on the SD card?
OR can I just leave them in a folder (on PC desktop) and access them from there?
3)do I put ALL those files at the same time on the SD card or are they accessed one at a time?
Because I can get the android/samsung splash screen I assume I've still got the correct (ie 6.0) bootloader in place. Correct?
If thats true, then again (q.1): am I ready to start the process?
I figure I should do this to get nougat rather than going through the same procedure to just re-load marshmallow.
Any thing else I should know or have missed?
First some pessimism: when a factory reset doesn't work, it's very likely to be a hardware problem.
But let's assume flashing a new rom can do the trick.
I haven't played around with this tablet, or even another Samsung device, so I'm no expert either, but I think I can guide you a bit.
You'll have to start by installing a custom recovery like TWRP. The one you've found is very old, I would assume that you can find a newer one.
People talk about using a PC program called Odin for flashing recovery, maybe you can search for that. Or read here:
https://wiki.lineageos.org/devices/chagallwifi/install
where they use an equivalent program called Heimdall.
Thanks for the info and link.
Started to look at odin but not having any experience or sure of the files needed, I thought I'd wait and see who might respond.
Interesting times. Was able to find the correct file for odin to use. Appears to be successful but I don't know.
This screen shot is what I got after trying to install gapps.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It says chagall BUT that was b4 I was successful with odin. The error message is the same for Gapps flash. Also, same
error message for SUPERSU
The previously posted instruction said to reboot to recovery. I can only do that if I power down then back to recovery. I do have
an option "reboot to bootloader". Is that the same??
I should mention that I tried the AOSP file (first post) and odin wouldn't accept it. Per instructions I found for odin, the file should end .tar.md5 which I did find
T800XXU1CPK2.tar.md5
Both gave me the same error message though.
+++++++++++++++
I can't install twrp on the tab as its not accepting input so I'm installing android studio on my PC and trying that way.
Well, it must be something else. Although I couldnt load the nougat version with odin, I successfully loaded marshmallow ("PASS" in odin).
https://samfrew.com/download/Galaxy__Tab__S__10.5__-WiFi-__/3klk/XAC/T800XXS1CRI5/T800XAC1CRI5/
BUT I still have the endless boot loop. Plugging in the power cord shuts it off/puts into charging mode.
Do you think it's still a hardware issue?
If you've got an SD card installed, try removing that.
But really, you've reached the end of my knowledge, so let's hope someone else chips in.
I was trying to install Edxposed following a step-by-step video guide to be able to use Mock Mock location. I had various unsuccessful tries with YAHFA, so while it was still downloaded and installed (checked safetynet and it was fine), I tried installing SandHook to see if it worked, but then i noticed SafetyNet had been tripped. I proceeded to uninstall every module i had in hope to fix the issue to no avail. Unfortunately i do not have any screenshots from the installation errors or before the safetynet triggered. I have the latest Magisk and twrp installed. I don't have any way of making a full system backup, so preferentially a solution that doesn't format my data, but if it's unavoidable i can do it.
Device: Oneplus 5T
Os: 9.0.10
Android 9
Model: ONEPLUS A5010
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Oneplus 5T guy
If phone's boot-loader is unlocked:
By means of ADB pull phone's /data partition to PC, boot phone in boot-loader mode, then by means of FASTBOOT re-flash Stock ROM and finally by means of ADB push saved /data partition back to phone.
jwoegerbauer said:
@Oneplus 5T guy
If phone's boot-loader is unlocked:
By means of ADB pull phone's /data partition to PC, boot phone in boot-loader mode, then by means of FASTBOOT re-flash Stock ROM and finally by means of ADB push saved /data partition back to phone.
Click to expand...
Click to collapse
sorry, im kind of dumb to all of this, i usually just install Magisk with no problems and thats the end, but how could i see the /data partition on my pc? i can only see it in a rooted file explorer on the device.. And whatdo you mean with "ADB pull" ?
re-flash Stock ROM
Click to expand...
Click to collapse
Should i have an image for it or do i download it? (i can search for it if necessary)
Oneplus 5T guy said:
sorry, im kind of dumb to all of this, i usually just install Magisk with no problems and thats the end, but how could i see the /data partition on my pc? i can only see it in a rooted file explorer on the device.. And what do you mean with "ADB pull" ?
Should i have an image for it or do i download it? (i can search for it if necessary)
Click to expand...
Click to collapse
After some extensive searching for what to do, I have downloaded a clean installation of the OS, but I currently am having issues with reinstalling Magisk in the new updated TWRP 3.4. It is important to note that apparently SafetyNet is partially reverted to its original state, only leaving "ctsProfile: false" and "basicIntegrity: true", which hopefully means with the MagiskHide feature, should become all true. If anyone has any insight or possibly a fix for it, it would be much appreciated.
Oneplus 5T guy said:
I was trying to install Edxposed following a step-by-step video guide to be able to use Mock Mock location. I had various unsuccessful tries with YAHFA, so while it was still downloaded and installed (checked safetynet and it was fine), I tried installing SandHook to see if it worked, but then i noticed SafetyNet had been tripped. I proceeded to uninstall every module i had in hope to fix the issue to no avail. Unfortunately i do not have any screenshots from the installation errors or before the safetynet triggered. I have the latest Magisk and twrp installed. I don't have any way of making a full system backup, so preferentially a solution that doesn't format my data, but if it's unavoidable i can do it.
Device: Oneplus 5T
Os: 9.0.10
Android 9
Model: ONEPLUS A5010
Click to expand...
Click to collapse
you can actually erase google play store data and reboot, it helps.
darrenliew96 said:
you can actually erase google play store data and reboot, it helps.
Click to expand...
Click to collapse
i had tried that and it did not work, to fix the problem i ended up having to delete all my data, since every time i restored it, the safety net tripped again. I simply deleted everything including the OS then made a clean install of everything, including TWRP Magisk and the OS. Reinstalling TWRP probably wasnt really necessary, but since i did it all in one go, i can't say for sure. The phone is working fine now, but the safetynet is partially triggered (ctsProfile: False), which did not block me from using any apps whatsoever. Reinstalling Magisk and using HideMagisk fixed it and it is back to True.
Hi,
I have a 6 month old EU model of this phone which has started rebooting frequently and displaying a DM Verity Corruption Error, the MUI Ui log folder shows abnormal reboot kernel /framework.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This phone is running stock software and has never altered / unlocked / rooted.
I've tried factory reset from within the settings menu and restoring backup, I've also tried wipe and reset from the recovery menu and not using my backup or installing anything and it still rebooted after 35mins up time, the device is not hot not has it been dropped.
I've also tried reinstalling the latest firmware but could only get this to work from within the setting and selecting download latest package.
I tried to download the latest recovery firmware and copy to SD CARD, naming as update.zip and it did not try to flash when I used the recovery boot (power off and power on holding power and volume), I also tried from the settings, about phone, MIUI press it a lot and then under the dots choose select package but it tells me it's not allowed to install an unofficial package.
I've tried to contact customer service and had the 'thank you we will respond in 48 hours', I think something may have been corrupted on the last MIUI update and it's very annoying as it's my Wife's phone and my Poco X3 NFC has been brilliant.
I can't seem to find other way to try and clean install the software, please can anyone relate to these issues and offer some advice on how I may be able to flash the current software over itself , of course it could be a hardware fault but it seems too much of a coincidence it is since updates have been received.
damianiw said:
Hi,
I have a 6 month old EU model of this phone which has started rebooting frequently and displaying a DM Verity Corruption Error, the MUI Ui log folder shows abnormal reboot kernel /framework.
View attachment 5887881
View attachment 5887879
View attachment 5887883
This phone is running stock software and has never altered / unlocked / rooted.
I've tried factory reset from within the settings menu and restoring backup, I've also tried wipe and reset from the recovery menu and not using my backup or installing anything and it still rebooted after 35mins up time, the device is not hot not has it been dropped.
I've also tried reinstalling the latest firmware but could only get this to work from within the setting and selecting download latest package.
I tried to download the latest recovery firmware and copy to SD CARD, naming as update.zip and it did not try to flash when I used the recovery boot (power off and power on holding power and volume), I also tried from the settings, about phone, MIUI press it a lot and then under the dots choose select package but it tells me it's not allowed to install an unofficial package.
I've tried to contact customer service and had the 'thank you we will respond in 48 hours', I think something may have been corrupted on the last MIUI update and it's very annoying as it's my Wife's phone and my Poco X3 NFC has been brilliant.
I can't seem to find other way to try and clean install the software, please can anyone relate to these issues and offer some advice on how I may be able to flash the current software over itself , of course it could be a hardware fault but it seems too much of a coincidence it is since updates have been received.
Click to expand...
Click to collapse
Bootloader locked check.if yes try to flash MIUI 13.0.6 full firmware 3gb size .it will be fixed or try to reinstall firmware with mi flash tool and locked bootloader