Development is ceased for this rom indefinitely. We now have the latest nightlies on the hands of a way better developer than myself, so head out to Flex's thread.
--------------------------------------------------------------------------------------------------------------
CyanogenMod 13 is a free, community built, aftermarket firmware distribution of Android Marshmallow, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions - READ! READ! READ!
Valid for everyone! Please, don't ask repetitive questions if you haven't followed the procedure, you'll be ignored.
- Unlock Bootloader (Google it).
- Download and extract the file.
- Install a compatible Recovery (TWRP) - this is not mandatory, but needed for flashing GAPPS (Google it).
- Perform a NANDroid backup of your current ROM (Mandatory - fastboot is finicky in our phones and fails some times!)
- Wipe system, internal data & cache partitions.
- Flash both extracted files (Google "Minimal ADB Fastboot" and "Google USB drivers"...):
Code:
fastboot flash system system.img
fastboot flash boot boot.img
- If fastboot fails, go back into recovery, do the wiping again, reboot to fastboot, it will work this time. (don't ask me why, Asus' stuff...)
- Optional: Go into recovery right after flashing and install Google Apps (OpenGapps, x86, 6.0, any version) (Google it).
Broken Features / Known Issues
DT2W - Double Tap to Wake doesn't currently work. ROM is fixed up, however the kernel needs fixing - will come in some days - use volume rocker for now. - SOLVED. Will be included in next release, should there be one.
FM Radio is unsupported - if you don't like it, go back to stock.
Shown baseband info is wrong. I don't care at all, won't be fixed - if you don't like it, go back to stock.
Lights are a bit buggy - If the phone is charged, the notification lights don't work anymore - likely a kernel fix as well.
SELinux is disabled and will NEVER be enabled. Our phone is not that powerful, so having it disabled improves performance - if you don't like it, go back to stock.
FullHD recording has dropped frames - go with HD 720 - likely not fixable.
Not all microSD cards are born the same - adoptable storage may or may not work for you.
Google Apps may be a little sluggish on the first run - ROM is odexed but GAPPS are not (building cache).
ROM is rock stable, I didn't observe any reboots in several days of use - if you don't like it, go back to stock
If you have the phone with 2GB of RAM, this will fly on it - if you don't like it... Well...
Video Walkthrough
Downloads
CyanogenMod 13 for the Zenfone 2E, Z00D, ze500cl DOWNLOAD HERE - NO MIRRORS, PLEASE!
Kernel Sources - Thanks to @jrior001
You can support our development, so more improvements may come to this device. Developing takes a lot of time, so even though donations are not required, they are highly appreciated ! Thanks for your support!
XDA:DevDB Information
CyanogenMod 13.0 Stable, ROM for the Asus ZenFone 2
Contributors
jacoghi
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader, FW 118 or 126
Based On: CyanogenMod
Version Information
Status: Stable
Current Stable Version: 13.0
Stable Release Date: 2016-12-02
Created 2016-12-02
Last Updated 2016-12-02
Changelog:
2016/12/02 - Initial release
Flashing right now will post results!
---------- Post added at 07:00 PM ---------- Previous post was at 06:29 PM ----------
The server is giving me problems
Hmmm... i hard reseted it .... now it boots straight to recovery mode... im flashing and flashing with no success now...
Went to TWRP wiped caches,data,system
Rrebooted into fasboot , loaded commands,,, commands good... hit reboot system
goes into recovery mode...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Had to downgrade was on 126 (L) lol now working fine
---------- Post added at 08:19 PM ---------- Previous post was at 08:00 PM ----------
robot_head said:
Click to expand...
Click to collapse
I've sent ya a pm
:fingers-crossed:
Adoptable storage doesn't work for me, the sd card isn't the problem because work with a galaxy s3 cm 13, when i try to use it settings crash after format.
EDIT: I uploaded 2 screenshot about this problem, sd work again after a new format but i can't use it with internal memory
Are you guys downloading this with a computer or phone. I only have a phone, computer is for adb only.
Sent from my MotoG3 using Tapatalk
robot_head said:
Are you guys downloading this with a computer or phone. I only have a phone, computer is for adb only.
Sent from my MotoG3 using Tapatalk
Click to expand...
Click to collapse
Deposit files - very bad cloud service. I downloaded it with my PC and it took me about 30 mins, and there was no problem with my connection.
Thanks, man. You rock!
When i try to call phone reboot; i'm very happy for this rom really! thank you very much but at this moment this rom isn't stable due to many bugs like this or adoptable storage
EDIT: Call problems solved reflashing the rom
thank you sir, we have been looking forward to seeing it for a long time
thank you ,anyway
So last night had to downgrade from last firmware 126(L) to 118 after that i flashed this and all is good now .... no reboots no crashes its a rock stable ROM and very fast too.
This is by far the best ROM there is for the Z00D and all thanks to jacoghi
djector said:
So last night had to downgrade from last firmware 126(L) to 118 after that i flashed this and all is good now .... no reboots no crashes its a rock stable ROM and very fast too.
This is by far the best ROM there is for the Z00D and all thanks to jacoghi
Click to expand...
Click to collapse
You have any problem with adoptable storage?
will this rom work on zenfone 2 ze500cl 2gb ram 8gb rom?
this has got to be a joke . day 2 of trying to just get this ROM so I can Flash it. @djector I tried about seven different zip Manager they all said file is corrupt
Sent from my MotoG3 using Tapatalk
I can't answer the call, when I select "answer" (green icon) nothing happens.
Code:
12-03 20:27:40.663 16600 16600 I InCall : AnswerPresenter - onAnswer mCallId:[Ljava.lang.String;@3c697a8phoneId:0
12-03 20:27:40.665 564 577 I Telecom : CallAudioManager: updateAudioStreamAndMode : mIsRinging: false, mIsTonePlaying: false, call: [241100390, RINGING, com.android.phone/com.android.services.telephony.TelephonyConnectionService, tel:************, A, childs(0), has_parent(false), [[Capabilities: CAPABILITY_SUPPORT_HOLD CAPABILITY_MUTE CAPABILITY_SPEED_UP_MT_AUDIO]], [[Properties:]], false, ComponentInfo{com.android.phone/com.android.services.telephony.TelephonyConnectionService}, [356a192b7913b04c54574d18c28d46e6395428ab], UserHandle{0}]
12-03 20:27:40.666 564 577 I Telecom : Event: Call 10: REQUEST_ACCEPT, null
AbdArash said:
will this rom work on zenfone 2 ze500cl 2gb ram 8gb rom?
Click to expand...
Click to collapse
i suppose yes.. is like 16gb version.. are 500CL both
Why jacoghi don't answer about our problem with your ROM?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PREAMBLE
Here is my CM11 port for the Lenovo A3000-H, 100% unofficial. Contributions are welcome!
To be able to even flash it, you'll need to use my CWM Recovery.
NOTE: I have built and tested this on my Lenovo A3000-H (16 GB version with 3G). Before flashing, please make sure to be on Stock 4.2. Open up a terminal or an ADB shell and type the following:
Code:
getprop ro.product.board
.
Should you get a3000_prc_3gfull, you are good to go. Otherwise, you need to flash the right Stock ROM. The members @kupyxa4444 and @luckasfb have created such a Stock-based ROM, so if you are unable to find one - try to contact one of these two.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
NOT WORKING
Camera
WORKING
GPS
WiFi
Audio
Boots
SELinux
Sensors
Vibration
Bluetooth
HWComposer
Offmode charging
sw video en/decoding (not hw)
Internal and external sdcards
RIL/radio (only on SIM1, SIM2 is still broken and therefore disabled, you can re-enable it by setting persist.radio.multisim.config=dsds in your build.prop)
NOTE
Should you ever face any issues (in the recovery or the ROM), provide logs (use Google to find out how to gather those). Additionally, I need to know what ROM you're on, hence you have to mention the build number.
Hint: "It doesn't work or I get error Status XY" are not bug reports and will be ignored. To keep the thread clean, use DevDB for real bug reports
DOWNLOAD
Instructions:
ordinarystar said:
Pre-equisites to flash:
1. Correct Firmware
1.1 First verify your build version by installing Terminal Emulator from Play Store and then type the following:
getprop ro.product.board
if the output is a3000_prc_3gfull, proceed to number 2.
1.2 if the output is not a3000_prc_3gfull, you will have to first flash another firmware which can be downloaded at:
https://drive.google.com/file/d/0B5yhZ9sXUH_GMWhCQllhbkZRbUk/edit
Firmware flashing instructions can be referred here:
http://forum.xda-developers.com/lenovo-a3000/development/rom-lenovo-ideatab-a3000-h-call-t2441135
2. My version of CWM installed
2.1 Now you should install the CWM. You need a rooted device to proceed. Assuming you followed 1.1 and 1.2, your device is already rooted.
You will need:
2.1.1 Install mobileuncle MTK Tools from PlayStore or download apk from thread below: http://forum.xda-developers.com/showthread.php?t=2697236
2.1.2 My CWM, download the zip file and extract the recovery.img. Put the recovery.img in your microSD card.
http://olivier.hubdroid.com/a3/cwm/cwm_a3-20141220.zip
2.2 Open up mobileuncle MTK Tools, and select install recovery. It will detect the recovery.img in your microSD card (top in the list).
Tap on it to install. DO NOT tap on others in the list. Just click OK to install. If you have already downloaded my rom with it placed in your microSD card,
you may proceed to boot into recovery, or you can press cancel and shut down your device.
The pre-equisites is now completed!
Steps to flash:
1. Download my rom from http://olivier.hubdroid.com/a3/cm-11.0/ - select a preferred release. latest release recommended.
2. Download gapps from http://forum.xda-developers.com/android/software/gapps-consolidated-gapps-thread-t3064693 - select gapps for kit kat 4.4.4
2. Boot up recovery: hold power button and volume up button, as it booted up release power button. Use volume up button to browse to "recovery mode" and press volume down to proceed recovery mode.
3. Do the following:
2.1 Factory reset
2.2 Clear cache
2.3 Clear dalvik cache (Advanced > clear dalvik cache)
2.4 install from zip, select the rom and install
2.5 install gapps.
2.6 when done, reboot to system
The installation is now completed!
Click to expand...
Click to collapse
I have spent a lot of time on this project and I still do - hence, donations would be highly appreciated.
My builds can be found here.
SOURCEs
Device tree (branch cm-11.0)
Kernel (branch cm-11.0)
OmniROM Gerrit (topic mt6589)
CREDITs
chrmhoffmann
kashifmin
Grarak
xplodwild
Dr-Shadow
superdragonpt
EnerJon
kupyxa4444
XDA:DevDB Information
CyanogenMod 11 for the Lenovo A3000-H, ROM for the Lenovo A3000
Contributors
Olivier
Source Code: https://github.com/lenovo-a3-dev
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-11-26
Last Updated 2015-10-23
Changelog
BUILD STATUS
Willing to contribute? Just drop me a PM, send me pull requests on GitHub or join my IRC channel on freenode: #cm-a3!
Please don't clutter the thread, post your bug reports here instead. Thanks!
CHANGELOG
Code:
[B][U]29/07/2015:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Fixed automatic rotation
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Removed scsi_wait_scan module
[*][/list]
[B][U]02/02/2015:[/U][/B]
[list][*]Fixed sw encoding and decoding ([B][COLOR="Lime"]YouTube videos etc work now![/COLOR][/B])
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Reverted to LZMA compression (for TWRP)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Security patches/fixes
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Misc patches for ext4, crypto
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added support for kernel mode NEON
[*][/list]
[B][U]28/12/2014:[/U][/B]
[list][*][B][COLOR="Blue"]kernel: [/COLOR][/B]Switched to LZ4 compression (instead of LZMA)
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added BFQ/SIO/FIOPS/ZEN/VR IO Schedulers
[*][B][COLOR="Blue"]kernel: [/COLOR][/B]Added overall stats for all available cores
[*]Fixed battery capacity (item in framework-res)
[*][/list]
[B][U]26/12/2014:[/U][/B]
[list][*]Switched back to deodexed build on community request
[*]Removed recovery-from-boot.p (we don't really want this)[/list]
[B][U]20/12/2014:[/U][/B]
[list][*]Fixed Internal sdcard[/list]
[B][U]17/12/2014:[/U][/B]
[list][*]Fixed HWComposer
[*]Odexed build for better performance[/list]
[B][U]16/12/2014:[/U][/B]
[list][*]Fixed NVRAM
[*]Fixed Bluetooth
[*]Fixed RIL[/list]
[B][U]26/11/2014:[/U][/B]
[list][*]Initial public release.[/list]
Successfully flashed over A3000_A422_013_25_140624.
Felt like holding a nexus 7!
Thanks a lot man!
Thanks
Thanks Olivier for your enormous efforts, you are working alone , You rock
successfully installed it over A3000_A422_013_025_140926_WW_CALL_FUSE
Using this build "cm-11-20141127-UNOFFICIAL-a3"
I'm testing it , and i'm going to report the bugs i find via the bug report
Again , thanks
This is the best post on XDA so far.
Thank you for your effort @Olivier
Think you Sir...is it support Call function ?
i will try it soon...
Hesham Sleem said:
Think you Sir...is it support Call function ?
i will try it soon...
Click to expand...
Click to collapse
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***
nut27455 said:
No this rom not support Calling because NULL IMEI
***Backup NVRAM before try it***
Click to expand...
Click to collapse
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??
Hesham Sleem said:
Ok...So if i backup NVRAM and restore it after flash rom , Call function will work ??
Click to expand...
Click to collapse
No. Guys, it's clearly stated in the OP that RIL/radio (and hence calls/SMS) is broken!
New user
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??
Magiiic said:
I have a question..
If I install this room on my lenovo a3000. What is the things that will not working on my tablet. Sorry I'm not professional and I need to help to know what is the risk's that I will found??
Click to expand...
Click to collapse
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)
MirXas said:
As it was said in the first post..
Bluetooth
RIL/radio
Camera
(hw) video en/decoding and hwcomposer
Internal SD card
probably much more (haven't had much time to test everything)
Click to expand...
Click to collapse
Any solve to this problem's?
Magiiic said:
Any solve to this problem's?
Click to expand...
Click to collapse
Wait for future builds.
Stop asking questions in this thread, there is a seperate Q&A thread especially for this.
Really great work
Only the camera to go and I'll use this I promise
Sent from my Lenovo IdeaPad A3000-H using XDA mobile app
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Sent from my Lenovo A3000-H
MOD EDIT: Not a great sense posting some other ROM LINK here
afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
STOP spaming the same everywhere ! The RIL bug is not in the kernel, it's in the ROM itself.
Click to expand...
Click to collapse
Members,
It is not so difficult to be sensible and considerate.
1) Kindly stop asking questions here. Use the Q&A.
2) If you find something not to your liking, find something which you like or produce what you like by yourself
THREAD CLEANED.
OP thankyou for this works very well with my F version ,never seen HD video load so fast
afridi.shahriar said:
Aren't u using hodor kernel?
Hodor kernel fir A3000 have not any radio/Bluetooth bug listed!! They why in this rom has bugs of radio?? http://forum.xda-developers.com/lenovo-a3000/orig-development/kernel-hodorkernel-t2952086
Click to expand...
Click to collapse
Yes, the CM11 kernel is based off my HodorKernel. Apparently the kernel isn't the problem here - you could flash it on any fused Stock ROM and everything would work.
To those who wanted ETAs: At the moment, I'm a bit busy with exams and other devices. Bugfixing is progressing rather slowly, not only due to time constraints but also because I'm working on this alone and it's not easy to work on mtk devices.
keep up the good work.
you can make it buddy.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 6.0 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Official CyanogenMod Wiki:http://wiki.cyanogenmod.org/w/Main_Page
Important information:
This thread is for CyanogenMod 13 builds for jfltexx (GT-I9505). The following will not be supported here:
Custom kernels
Mods
Xposed
We don't support Xposed and any logcat which includes a Xposed module will be ignored. You're kindly invited to not report bugs if you:
Flashed a custom kernel
Installed or did mods from untrusted sources
Installed SuperSU
Modified system files
Installation
First time flashing CyanogenMod 13 on your device, or coming from another ROM?
Download the zip(s)
Install a compatible recovery
Perform a nandroid backup of your current ROM (Optional)
Wipe data/factory reset
Flash CyanogenMod
Optional: Install the Google Apps addon package
Reboot
Useful links
Unofficial jfltexx changelog
CyanogenMod Wiki jfltexx
Jira issue tracker - don't report bugs for nightly builds!
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: https://play.google.com/store/apps/details?id=com.tortel.syslog
Downloads
CyanogenMod:
Nightlies: http://get.cm/?device=jfltexx
Google Apps:
OpenGApps (choose ARM, 6.0, nano)
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
XDA:DevDB Information
Official CyanogenMod 13 for the Galaxy S4 I9505, ROM for the Samsung Galaxy S 4
Contributors
AntaresOne
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Version Information
Status: Testing
Created 2015-12-30
Last Updated 2016-01-08
Review
Thanks a lot to @shark jungle
Yeyaaaa
Finally! I'm going to test it.
Finally... original CM13
Sent from my GT-I9505 using Tapatalk
Nice to see you again here (s4) Mattia will try in next days
AntaresOne: the reason why i'll be keeping my s4 two more years, at least.
Grazzie Mile
AntaresOne said:
Antares
Click to expand...
Click to collapse
Really glad we have s4 original cm13, thank you very much. I've just a problem, as with every other MM build: my wifi disconnects every time i turn off my phone screen. I set the wifi to never turn off, i disabled the avoid poor connection thing, tried changing to a static type conection or to set to 2.4 or 5 ghz only but no results... did you know this problem? and if yes, any hint to give at me? (and to all other members with this problem?) thank you in advance.
Bugs: Calling does not work after a while.
http://forum.xda-developers.com/galaxy-s4/general/jfltexx-moved-to-cm13-t3281971
wow out of all the MM roms ive tried ive never seen this
Corduroysack said:
wow out of all the MM roms ive tried ive never seen this
Click to expand...
Click to collapse
Screen usage?
Great job i can`t belive but the cast screen works wifi works and i think all sensors ! Tnx for this cm13 for s4
Jared20098 said:
Screen usage?
Click to expand...
Click to collapse
lol 7 mins but what im saying i usually set up my device then unplug send some messages make sure whatsapp is running then leave alone for a few hours. My uptime is 2hrs54 since i unplugged and ive never seen this in other MM roms before
It's not to say that usage is going to be any better/longer than other MM roms that will be noted after a few cycles
is bluetooth working?
does this ROM suffer from the deep sleep turning off WIFI issue found on other CM13 roms?
nickmax1 said:
is bluetooth working?
does this ROM suffer from the deep sleep turning off WIFI issue found on other CM13 roms?
Click to expand...
Click to collapse
looks like wifi turning off is fixed, looked at battery info and wifi is solid bar and im still getting whatsapp messages through if that helps
wifi still switches off
Seen this on another thread though if it isn't
http://forum.xda-developers.com/showpost.php?p=64561314&postcount=186
Hey guys,
I tried flashing the CM13 but the new CM recovery doesn't have an option to install from microSD, nor is my microSD detected.
I already wiped the partition as well, and my backup got deleted, yes yes mistake on my part.
How can I go about flashing the ROM onto the phone?
Thanks!
Dirty flashed and get error: "No SIM found" and a lot of FC ...
Will try a clean flash later
EDIT
Clean flash and up running :good:
danasht said:
Hey guys,
I tried flashing the CM13 but the new CM recovery doesn't have an option to install from microSD, nor is my microSD detected.
I already wiped the partition as well, and my backup got deleted, yes yes mistake on my part.
How can I go about flashing the ROM onto the phone?
Thanks!
Click to expand...
Click to collapse
Try TWRP Recovery.
voice call invalid number when i`m 3g/4g if i switch to 2g no problem but in rest it`s ok
... on the quick i found following issue
when DPI is changed via settings some icons (especially dots on sliders) are off-center (see screenshot)
Temp. workaround: additionally change DPI in build.prop to same value
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 15.1 is a free, community built, aftermarket firmware distribution of Android 8.1. (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Requirements
* You must read this post completely
* You must have flashed a stock MM update to update the firmware to a version that is compatible with these builds. Search XDA for the best way to do so for your device (if you already did that prior to installing any Nougat ROM, you are fine!).
* You must use the search first and make sure your question has not been answered yet!
* Do NOT ask for the availability of features or if any specific app works - we implement / announce new features when we want to
* Use the latest TWRP available, otherwise expect issues
* If you have a problem, do not ask if someone else has it. Post with logs or don't post at all!
Code:
[COLOR=RED][B]Important note:[/B][/COLOR]
Stock Firmware B360 and B370 are known to cause bootloops!
(Generally: if your stock ROM supports VoLTE it is likely that it is also affected!)
All others might work, please do not ask in here how to up- or downgrade!
Known Issues / NOT working / "Bugs"
* Search the thread!
* Anything running VoLTE firmware
* You tell me! (See "Other Issues")
Everything else WORKS, do NOT ask if anything (feature, function, ...) specific is working or not (Search the thread if you want to make sure and if you don't find it: test it yourself)
Other Issues?
Before posting on this thread, make sure of a few things:
You've utilized the search function of the forums. Nothing irritates us more than lazy people who do not search for an answer before asking or ask the same question over and over again.
If you are the only one having a problem: boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
LOGS LOGS LOGS!!!!
Press BOTH volume keys + power key - it will vibrate very short. Wait until a notification appears that the bugreport is ready, send it to your mail and post it.
Alternatively go to dev options (press "build number" in "About phone" 7 times to activate it), activate the switch "Shortcut for bugreport", then go to Settings->Keys->Power key and activate it there as well. Long press power-key and then use the new menu item.
Only if rooted:
Use this: SysLog by Tortel
If you have a hard reboot (to the vendor boot logo, not the LineageOS boot logo), use adb or any other file explorer tool to pull a copy of "console-ramoops" after the reboot and provide that.
Code:
adb pull /sys/fs/pstore/console-ramoops
Note: We will not support any kind of modification on the ROM not done by our sources. If you are running XPosed, Kernel Booster or whatever occurs to you, we won't support you in any way. The problem will in every case be treated as the additional softwares' fault (because often it is!)
Changelog
* Gerrit (All)
* Device tree
* Kernel
Download Links
ROM: https://download.lineageos.org/kiwi
Again: if you need Google-Apps, install them after flashing the ROM and BEFORE the first reboot!
Google apps addon:
(Note: Not required to run the ROM)
We are using Open GApps (Link) Arm64 version, others might also be working (make sure to use ARM 64bit when using other providers!)
Note: In case you want to use any gapps, YOU MUST install the right gapps the first time that you flash a marshmallow ROM. Do not boot with an older gapps or without one and then try to install it later.
Note: If you install a package which replaces the default dialer (mostly "Stock Gapps") you have to go to Settings->Apps->Gear-Icon and set the new dialer as a default telephony app to prevent force closing of apps
Root addon:
Official download site - our device is ARM64
Don't use SuperSU or other tools, otherwise expect bootloops!
Important note
This is a development thread. This means it is NOT your personal support thread.
Questions about anything not related to LineageOS on kiwi (Honor 5X) will not be accepted nor be answered.
This includes topics like going back to stock, problems with third-party apps (e.g. Snapchat), ...
Also do not encourage people with such questions by answering them but report them to keep the thread clean!
Supported variants
Honor 5X
USA: KIW-L24
Russia: KIW-L23
India: KIW-L22
Europe: KIW-L21
China: KIW-AL10, KIW-AL20, KIW-CL00, KIW-UL00, KIW-TL00 (might have some firmware problems), KIW-TL00H
Honor GR5
Canada: KII-L05
Japan: KII-L22, KII-L21
Your's missing? Contact us!
XDA:DevDB Information
LineageOS 15.1, ROM for the Honor 5X
Contributors
BadDaemon, Dobroslaw Kijowski
Source Code: https://review.lineageos.org/#/q/(project:LineageOS/android_device_huawei_kiwi+OR+project:LineageOS/android_kernel_huawei_kiwi)+AND+(statuspen+OR+status:merged)+AND+branch:lineage-15.1
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.1.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2018-09-22
Last Updated 2019-06-26
Reserved
FAQ
Q: Why the **** did it take so long?
A: Besides the fact that I don't really need to answer about my working speed:
I have actively been working on bringing up 8.x for this device since February. Some might have seen some development going on with the kernel on 14.1, but effectively this was all in preparation for 15.1: The kernel being used in this version of the ROM is completely redone:
We threw away what we had and started fresh with a plain qcom kernel. Then we re-added what we needed, effectively ending in around 700k lines less of custom additions by the OEM.
Q: Why didn't you share it before, so others could work on it as well?
A: Because last time we did that, someone else came along, compiled our work and shared it himself. (Not to start about all the other copy&paste-ROMs who could have done the work as well but usually just wait for us to do it)
Q: Anything else to add?
A: Yes: read the first post before replying or testing the ROM!
Reserved
Install instructions:
* Follow the instructions on https://wiki.lineageos.org/devices/kiwi/install
Reserved
Reserved 2
this was suprising will test it and see if it works
it fails flashing with error 7
E3004 : this package is for device KIWI; this device is .
omid_shirzad said:
it fails flashing with error 7
E3004 : this package is for device KIWI; this device is .
Click to expand...
Click to collapse
Please tell me you have updated your twrp before trying?
BadDaemon said:
Please tell me you have updated your twrp before trying?
Click to expand...
Click to collapse
nope
its 3.1.1.0
So far, no issues to report on KIW-24. Awesome job!
omid_shirzad said:
nope
its 3.1.1.0
Click to expand...
Click to collapse
Bro ... update it and try .... please read Frist post
Bharath kumar 007 said:
Bro ... update it and try .... please read Frist post
Click to expand...
Click to collapse
THANKSSSSSS
updated it and i'm flashing rom again<i think it workd:good::good::good:
finnaly oreo is coming for honor 5, cant wait to test it, thanks dev
So glad people follow the instructions:
"Read the first post!"
"* Use the latest TWRP available, otherwise expect issues"
...
BadDaemon said:
Install instructions:
* Follow the instructions on https://wiki.lineageos.org/devices/kiwi/install, just use the ZIP linked in the first post instead of one from the official page
Click to expand...
Click to collapse
Thanks. Buddy. I always knew you are working and you will post it. Community thankful to you.
omid_shirzad said:
it fails flashing with error 7
E3004 : this package is for device KIWI; this device is .
Click to expand...
Click to collapse
you can try this method
Guys, this problem is already solved. dont post such stuff please, especially when its a user error...
Thanks to devs to make it possible.... I am coming from LoS 14.1 did a full wipe but rom does not boot (showed LoS logo but reboot to recovery) after that I flashe Rom + Gapps + BaPatch.zip but phone stucks on Huawei logo. I don´t know how to downgrade Emui because I have the chinese variant UL-00
Bootloop
Hello first of all thanks to the devs who made it possible for our device i really appreciate their hard work so im coming from los 14.1 using it as my daily driver for almost 4 months had no issues with it so far with it but today when i flashed this rom [clean installed] it show the lineage boot logo but after a min device reboots back to recovery i have tried again a several but no luck so far hopefully the devs can understand whats the issue thank you? btw I'm on latest twrp also and my device name kiw-l21 and also I'm not on volte firmware
blackscreen
hope i take the logs right
lockscreen goes black after restart
View attachment 2018-09-23_09.54-lockscreen.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include "std_disclaimer.h"
/*
* Your (probably expired) warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
TWRP 2.8+ is recommended.
Flashing Instructions (if coming from another rom):
Make a nandroid Backup (seriously)
Wipe System, Data, and Cache
Flash ROM
Flash GApps
[Optional] Flash SuperSU or Lineage Root addon
Update Instructions:
Make a nandroid Backup (seriously)
Flash ROM
Wipe cache/dalvik
Profit!
What works:
Booting
The screen
What doesn't work:
Everything else (most will be fixed next build)
Download: https://www.androidfilehost.com/?fid=11410932744536992067
Sources:
https://github.com/3liteking148/android_device_samsung_golden/tree/lineage-15.1
https://github.com/3liteking148/android_kernel_samsung_golden/tree/oreo-dev
https://github.com/3liteking148/android_hardware_u8500/tree/cm-14.1
https://github.com/3liteking148/android_vendor_samsung_golden/tree/cm-14.1
Credits list:
@Meticulus - for original cm13 device tree
@ChronoMonochrome and SergeyL - oreo bringup in u8500 platform and Patches
@golden-guy - Kernel
@rINanDO - backports of oreo patches to 3.0.x kernel
XDA:DevDB Information
LineageOS 15.1 for GT-I8190, ROM for the Samsung Galaxy S III Mini
Contributors
3liteking148
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.0.x
Version Information
Status: Testing
Created 2018-11-01
Last Updated 2018-11-01
Installed 15 baked room
Installed Gapps 8.1
Installed Magisk
Success Installation
After Success boot
black screen: System ui insnt responding| Wait I choose wait - Just a sec
I see blue tooth is enable + Android setup has stopped
Simcard is not available +
It seems problem to google gapps
will try withouth gapps
SIMCARD not detected
Thank You Sooooo Much @3liteking148 for your hard work
Wohohoho... A new toy.
Cant wait to see a working version. keep up the great work thnx.
Can't wait to see this ROM to be stable! God bless.
I'm stuck at Bootlogo no matter if I do a clean flash or a update, but thank you anyway
knut2002 said:
I'm stuck at Bootlogo no matter if I do a clean flash or a update, but thank you anyway
Click to expand...
Click to collapse
Download it again (Maybe File corrupt)
keep it up
Great work!!! Android 8.1.0 for S3 mini
The rom has some bugs, but I'm happy that our old device allows us to do that.
Thank you!!!
OfficialNLS said:
Download it again (Maybe File corrupt)
Click to expand...
Click to collapse
i tried it several times with three different downloads but it still doesnt boots
i also tried different versions of twrp but still no boot into system
it loops and loops and loops but after 2 hours i gave it up and wait for the next build
---------- Post added at 11:48 AM ---------- Previous post was at 11:24 AM ----------
is there the chance that the problem is the filesystem i use (its f2fs) ?
knut2002 said:
is there the chance that the problem is the filesystem i use (its f2fs) ?
Click to expand...
Click to collapse
Did the op say the ROM is f2fs compatible? No. Default should be ext4. Always ext4 unless specified otherwise.
Grumpy Cat said:
Did the op say the ROM is f2fs compatible? No. Default should be ext4. Always ext4 unless specified otherwise.
Click to expand...
Click to collapse
Ok thank you I'll try it with ext4
If you want f2fs support, try data first. If it works, notify the OP so the post can be updated.
it works thank you very much and our s3 mini seems to be pretty fast with this rom, I'm really looking forward to the wifi works, because then I think it's the perfect rom for the device (I had the same impression when I switched from LOS 14.1 to 15.1 on my Galaxy s2)
I wouldn't get to excited about speed, once everything is working it will slow down quite a bit (especially boot). Really old phone that was fairly slow for its time and really new firmware.
very good
nice work and thank for release
Waiting For Next Update☺☺
Room Look very Nice??
Thank you for your Hard Work☺☺
Any chance of T599 support?
Grumpy Cat said:
I wouldn't get to excited about speed, once everything is working it will slow down quite a bit (especially boot). Really old phone that was fairly slow for its time and really new firmware.
Click to expand...
Click to collapse
Would it be faster than lineage 14.1 for s3 mini? Could I optimise it but not as much as an android go edition? Can anyone compare its speed to jellybean or kitkat because im using this phone with cm 11 as its best for me in terms of speed and as they stop JB support on some apps
Hello !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The new Android 10 is coming to your Huawei MediaPad M3 Lite 8/10, Qualcomm Snapdragon MSM8940 with the new LineageOS 17.1 !
Please note that this ROM is one of my side projects, for which I could provide zero warranty. By installing this ROM, you acknowledge that you take all the risks that come with installing custom firmwares on your devices, including but not limited to bricking your device, losing your data, etc.
Warning !
Installing a custom ROM on your device can sometimes be difficult and also with unwanted consequences! Therefore, make sure that you understand exactly what risks this operation entails - you are the only one responsible for all actions taken on your device.
Devices Supported:
Huawei MediaPad M3 Lite 10 :
BAH-AL00/BAH-L01/BAH-L09/BAH-W09
Huawei MediaPad M3 Lite 8 :
CPN-AL00/CPN-L0J/CPN-L09/CPN-W09
About LineageOS :
LineageOS 17.1 is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Downloads :
LineageOS-17.1-HuaweiMediaPadM3Lite_2023-02-26.zip md5 : b86f752b8851bf8a8e1ce9e2168ee92d
This ROM do not include GApps
please use always the last available pack :
OpenGApps for Android 10 ARM64
Instructions :
0. LOS 17.1 must be installed via TWRP 3.3.1-0
1. After device boot on LOS 17.1 you must to install the New TWRP 3.3.1-3
( TWRP 3.3.1-3 needed for flash GApps on LOS 17.1 )
2. plug USB cable to your Desktop/Laptop for copy files ( or add them to a external storage/microSD card )
3. go to Wipe -> Swipe to Factory Reset
4. copy LOS-17.1 ROM & GApps to Internal/External Storage
5. go to Install -> check the LOS zip file
6. Add more Zips
7. check GApps zip file
8. Swipe to confirm Flash
9. Wipe cache/dalvik -> Swipe to Wipe
10. Reboot System
11. Enjoy!
What's working :
* Touchscreen
* Audio & Video
* WIFI
* BT
* GPS
* FPS
* Lights
* Sensors
* Internal/External Storage
* ADB/MTP & USB/OTG
* RIL & data connection
* Camera Video recording
* Flip Cover
* Encrypt device
* SELinux Enforced
Not working :
* Photo Camera
* there could be also others minor issues !
Credits :
LineageOS Team
dianlujitao
LuK1337
Greg Kroah-Hartman for keep alive 3.18.y kernel !
Source Code :
device tree : android_device_huawei_bach Branch: ten!
kernel: android_kernel_huawei_bach Branch: ten !
Screenshots :
Contributors
surdu_petru
Paypal Donation : paypal.me/petrusurdu1
Source Code: https://github.com/Huawei-Dev?tab=repositories
ROM OS Version: Android 10 / Q
ROM Kernel: Linux 3.18.140
ROM Firmware Required: LineageOS 16.0 Android Pie
Based On: LineageOS
Version Information
Status: Stable
Created 2019-10-20
Last Updated 2023-02-26
Donors :
@ossizwei
@Jobode747
@Micromind
@morgan7676
@Kagum
@mrdark5555
@realdomdom
@xbor
@#marcg#
Norbert Ossendorf
Once again thank you very much to all donors !!!
Now that I've managed to unlock my M3 Lite I've decided to jump in with both feet
I've put this LineageOS 17.0 on with CyanogenMod OpenGAPPS 10 full. I'll let you know how I get on.
Do I need to update TWRP from 3.2.0.0 to 3.3.1.0?
thanks
Paul
---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------
Got getting messages repeatedly between these two:
"com.qualcomm.qcrilmsg.... keeps stopping"
"android setup keeps stopping"
csjjpm said:
Now that I've managed to unlock my M3 Lite I've decided to jump in with both feet
I've put this LineageOS 17.0 on with CyanogenMod OpenGAPPS 10 full. I'll let you know how I get on.
Do I need to update TWRP from 3.2.0.0 to 3.3.1.0?
thanks
Paul
---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------
Got getting messages repeatedly between these two:
"com.qualcomm.qcrilmsg.... keeps stopping"
"android setup keeps stopping"
Click to expand...
Click to collapse
Yes you can update now Twrp to 3.3.1.
Btw I didn't tested GAppps. So if it's not working just remove it.
This is happening a lot when I go into Setting: "android setup keeps stopping"
csjjpm said:
This is happening a lot when I go into Setting: "android setup keeps stopping"
Click to expand...
Click to collapse
Ok, just remove GApps and see how it's working ... later you can install nano or pico, not full version of GApps !
EDIT :
Full version of GApps it's not recommended at all as there is just a Betta LOS 17.0 !
Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.
After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.
oddhap said:
Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.
After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.
Click to expand...
Click to collapse
Well done !
oddhap said:
Awesome!, thanks for providing full source.
I'm getting the same error "com.qualcomm.qcrilmsgtunnel" keeps crashing until I manually close the app on clean install, I have a tablet with no sim. Other than that the tablet seems to be working fine.
After installing opengapps android setup crashes repeatedly, but after disabling android setup, play store works as normal.
Click to expand...
Click to collapse
Thanks, I didn't know if the 'android setup' was important or not. Have disabled it and all quiet now.
I tried a few version of GAPPS10, Pico, Nano etc. and still got the errors. Once 'android setup' disabled now issues.
Thanks
Installed without GApps. Seems fine so far. Will test more once it completes charging. Thanks for all your hard work man. you have really enhanced the overall experience with this tablet.
fallensoldier said:
Installed without GApps. Seems fine so far. Will test more once it completes charging. Thanks for all your hard work man. you have really enhanced the overall experience with this tablet.
Click to expand...
Click to collapse
Thank you for feedback!
Hi I try to test this rom, very nice!! But it still has many bugs, but I'm sure it will improve over time! Report that it is present some bugs, when start cpuz app the device restarts suddenly, Chrome some times stop to work , the microphone does not work in any app (eg. google assistant "hey google") work with earphones. When you record a fingerprint and then reboot the device you lose the fingerprint setting.
Thank you so much for the chance to try an updated version of andorid on this tablet!!
I hope to be helpful, a great job has been done.
I will try this rom for a short time but will return to the stock version, it won't be easy to go in stock, because there is no custom rom based on the original firmware.
I will find a way to return to the stock.
Bye bye.
sergybizzi said:
Hi I try to test this rom, very nice!! But it still has many bugs, but I'm sure it will improve over time! Report that it is present some bugs, when start cpuz app the device restarts suddenly, Chrome some times stop to work , the microphone does not work in any app (eg. google assistant "hey google") work with earphones. When you record a fingerprint and then reboot the device you lose the fingerprint setting.
Thank you so much for the chance to try an updated version of andorid on this tablet!!
I hope to be helpful, a great job has been done.
I will try this rom for a short time but will return to the stock version, it won't be easy to go in stock, because there is no custom rom based on the original firmware.
I will find a way to return to the stock.
Bye bye.
Click to expand...
Click to collapse
Thanks for feedback ! Btw, I already noticed fingerprint issues .... but as you already said the ROM will be improved with each update !
At this time even Lineage OS didn't released the stable source yet .
@surdu petru Do you have the possibility to make a custom rom based on the latest stock rom to flash via twrp? It would be a great thing.
Thank you for your work!
sergybizzi said:
@surdu petru Do you have the possibility to make a custom rom based on the latest stock rom to flash via twrp? It would be a great thing.
Thank you for your work!
Click to expand...
Click to collapse
Sorry, no way ... I tried a few time to revert to stock but my device can't boot on stock recovery from some unknown reasons .
But there is a few users wich already reverted this device to stock after installed Lineage OS 16.0 ( Android Pie ), so you could search on Lineage16.0 thread for their posts, or you can get in touch with them through PM.
Good luck !
Ok no problem.. I'll find a way to get back to the stock .. But first I'll try the other roms with Android 9. Thank you
hello guys,
any chance to see an update for the LTE version?
thanks
mrbarnie
mrbarnie said:
hello guys,
any chance to see an update for the LTE version?
thanks
mrbarnie
Click to expand...
Click to collapse
My tablet is also LTE version . What it's not working now ? Anyway many stuff will be improved in the next updates .
great thanks a lot i thought that this update is only for the lite version, which means WIFI only.
i have BTV-DL09
Build BTV-DL09C100B311
EMUI 5.0.4
mrbarnie said:
great thanks a lot i thought that this update is only for the lite version, which means WIFI only.
Click to expand...
Click to collapse
NO, LITE version doesn't mean WIFI only !