So... CyanogenMod is dead. LineageOS is taking it's place. The ROM is basically CyanogenMod but with changes to the name.
This is completely 'stock' from their source code, so this will encrypt your tablet, and will be prerooted (under Developer options in Settings)
Changelog is available at LineageOS Gerrit
There are no apparent bugs, but any bug reports will be welcome.
Gapps are available at opengapps.org.
Installation
Flash the latest 7.1.1 vendor image in fastboot (fastboot flash vendor vendor.img)
Download latest release from here
Install it in TWRP recovery
Install the downloaded opengapps package
XDA:DevDB Information
Unofficial CyanogenMod/LineageOS 14.1 for Nexus 9, ROM for the Nexus 9
Contributors
hazzer
Source Code: https://github.com/LineageOS/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 7.1.1 (NMF26F) vendor, latest bootloader
Based On: CyanogenMod
Version Information
Status: Nightly
Created 2016-12-04
Last Updated 2016-12-29
Not quite the first CM14.1 for the Nexus 9, but appreciated you taking the time and effort to compile it in any case.
lmulli said:
Not quite the first CM14.1 for the Nexus 9, but appreciated you taking the time and effort to compile it in any case.
Click to expand...
Click to collapse
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
hazzer said:
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
Click to expand...
Click to collapse
Check hashbang's cm14.1 builds on Android file host.
Can you please post the 7.1.1 vendor image?
Sent from my Nexus 9 using Tapatalk
hazzer said:
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
Click to expand...
Click to collapse
Just go on Androidfilehost and type in flounder
hazzer said:
I hunted for ages trying to find one that had periodical builds, and I couldn't find any here. Do you mind linking me to the thread?
Click to expand...
Click to collapse
https://androidfilehost.com/?w=profile&uid=95897840722645866
Right hand side.
@hazzer Root is broken on latest 12/05 build. It disappeared from the developer settings. It was functioning in 12/04 build.
tibere86 said:
@hazzer Root is broken on latest 12/05 build. It disappeared from the developer settings. It was functioning in 12/04 build.
Click to expand...
Click to collapse
Hi,
Sorry there was no note attached to the build about this. I purposely removed this so that I could pass safety net by default on the ROM.
If you would like root instead of Android Pay, you can try either SuperSU or Magisk with phh's superuser. If you use Magisk hide, you should be able to get root while passing safety net.
Again, sorry about not noting this, I'll make sure I do later today.
Hi,
If you take a look at the download page, I've now added the reason root was and still will be removed. I've also posted a link to the vendor image and latest bootloader. I would recommend downloading the bootloader from Google themselves if possible. The newest source code for the Nexus 9 device tree has been merged into my GitHub however hasn't made it's way into the latest build (20161205). It will be in 06's build.
Sorry about the poor communication regarding root and the likes
hazzer said:
Hi,
If you take a look at the download page, I've now added the reason root was and still will be removed. I've also posted a link to the vendor image and latest bootloader. I would recommend downloading the bootloader from Google themselves if possible. The newest source code for the Nexus 9 device tree has been merged into my GitHub however hasn't made it's way into the latest build (20161205). It will be in 06's build.
Sorry about the poor communication regarding root and the likes
Click to expand...
Click to collapse
Thanks for the info. Just wanted to let you know :good:
Rom is working great!! But i have one problem: I don't have a mobile signal. It just says "no carrier" (in german "Kein Dienst") and i can't set up mobile settings. What to do?
McFlypants said:
Rom is working great!! But i have one problem: I don't have a mobile signal. It just says "no carrier" (in german "Kein Dienst") and i can't set up mobile settings. What to do?
Click to expand...
Click to collapse
That's probably because this is built for the non-LTE version of the Nexus 9. I'm gonna try and add flounder_lte to my build system tonight. I'll post a build sometime tonight or tomorrow if that's okay?
hazzer said:
That's probably because this is built for the non-LTE version of the Nexus 9. I'm gonna try and add flounder_lte to my build system tonight. I'll post a build sometime tonight or tomorrow if that's okay?
Click to expand...
Click to collapse
Yeah, great!! I'll flash it immediately when it's online. Going to try the stock rom now to prove that it's your rom and not the device. We'll stay in contact
McFlypants said:
Yeah, great!! I'll flash it immediately when it's online. Going to try the stock rom now to prove that it's your rom and not the device. We'll stay in contact
Click to expand...
Click to collapse
Hi,
I'm a little late actually successfully getting an LTE version built, as the device tree hasn't been updated for CM14.1 yet. I'll make sure to mention you here when I've got one ready. Sorry for taking so long
Harry
hazzer said:
Hi,
I'm a little late actually successfully getting an LTE version built, as the device tree hasn't been updated for CM14.1 yet. I'll make sure to mention you here when I've got one ready. Sorry for taking so long
Harry
Click to expand...
Click to collapse
No problem, i am aware that it's your freetime you are spending here.
Btw LTE works on CM13 and stock rom, so it's definately not the device. I'm looking forward for your build but i don't need LTE on my nexus 9 the next 4 days. So don't stress yourself :good:
McFlypants said:
No problem, i am aware that it's your freetime you are spending here.
Btw LTE works on CM13 and stock rom, so it's definately not the device. I'm looking forward for your build but i don't need LTE on my nexus 9 the next 4 days. So don't stress yourself :good:
Click to expand...
Click to collapse
I've actually managed to get one built, if you want to take a look. It's below the flounder section. I don't have an LTE Nexus 9 to test, so you'll to let me know how it goes
hazzer said:
I've actually managed to get one built, if you want to take a look. It's below the flounder section. I don't have an LTE Nexus 9 to test, so you'll to let me know how it goes
Click to expand...
Click to collapse
It's fine! Runs smooth like the non-LTE-version but LTE works! Nice
I tried your builds for 13th and 14th of December (WITH LTE) and they all don't get a LTE signal. Also no sim-toolkit installed and no APN-Settings.
I stay with your first LTE-Build, it's fine!
@hazzer: Thanks for your work on the Nexus 9. Any plans to support the official flounder builds?
Related
Presenting CM13 unofficial. Built from mostly pure CyanogenMod sources, with a few tweaks that I try to keep updated on my github. This is only possible due to the work of Ziyan and MWisBest.
Instructions
First time flashing CM13 to your toroplus (or coming from another ROM)?
Unlock & install a recovery
Wipe data & cache partitions
Flash CyanogenMod.
Optional: Install the Google Apps addon package.
Updating from a previous build?
Just install the latest ROM zip. If you had Google Apps installed, they will be reinstalled automatically.
Click to expand...
Click to collapse
Downloads
Latest cm-13.0 build: https://www.androidfilehost.com/?fid=24588212152305191
Final cm-12.1 build: https://www.androidfilehost.com/?fid=24438995911970260
All builds: https://www.androidfilehost.com/?w=files&flid=23531
Unofficial TWRP recovery: https://www.androidfilehost.com/?fid=24459283995311440
Google Apps: http://opengapps.org/
- Platform: ARM
- Android: 6.0
- Variant: pico (recommended), or nano
Bugs
LTE Data does not work. (3G works)
XDA:DevDB Information
UNOFFICIAL CyanogenMod 13.0 (DDK 1.9), ROM for the Samsung Galaxy Nexus
Contributors
musical_chairs
Source Code: https://github.com/CyanogenMod
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2014-09-25
Last Updated 2016-07-15
now with Marshmallow!
Will this be updated to work with the new GPU drivers? Thank you!
Sent from my LG-LS980 using XDA Free mobile app
illinoissparks18 said:
Will this be updated to work with the new GPU drivers? Thank you!
Sent from my LG-LS980 using XDA Free mobile app
Click to expand...
Click to collapse
Short answer: yes. I'm going to try grabbing the relevant code from MWisBest's githib. If it turns out to be too involved for my limited skills, it will have to wait until Ziyan submits the changes to CM.
musical_chairs said:
Short answer: yes. I'm going to try grabbing the relevant code from MWisBest's githib. If it turns out to be too involved for my limited skills, it will have to wait until Ziyan submits the changes to CM.
Click to expand...
Click to collapse
OK I am going to be on board with testing for sure. I left a post in the now no longer current official thread that I flashed the last official build yesterday and I had perfect 3G to LTE to 3G handoff, rock solid WiFi strength, basically everything seemed to work very well. I am looking forward to seeing how things progress. I haven't been able to keep any of the official CM builds from bootlooping until now. Hopefully you stick with it because I am getting better performance from this device than I have seen in a long while
Sent from my Galaxy Nexus using Xparent Gray Tapatalk 2
musical_chairs said:
Short answer: yes. I'm going to try grabbing the relevant code from MWisBest's githib. If it turns out to be too involved for my limited skills, it will have to wait until Ziyan submits the changes to CM.
Click to expand...
Click to collapse
Awesome!! Thank you!!
Sent from my LG-LS980 using XDA Free mobile app
I should've had a machete to hack through the jungle of build errors from pulling a modified OmniROM device tree into a CyanogenMod build. Looks like the build is rolling now though, with any luck it might just complete successfully - who knows, it might even boot.
The only thing slower around here than me is my poor old computer.
Its kind of ironic that the Galaxy Nexus was the first official LTE device for Sprint and I am only just recently starting to get LTE on a semi regular basis.
@musical_chairs, take your time with your builds. I assure you that they are appreciated. Now that this device is actually getting decent (for Sprint) signal and still has current builds makes it more enjoyable to use than just about any time I can remember....I just miss Imoseyon's Lean kernels. I got GREAT battery on those. They were compiled in the now deceased (I think) CMRemix ROMs but the LTE is definitely a plus
Update: For now, I have stopped working on building CyanogenMod with the DDK 1.9 drivers. I was ending up with a completely unsustainable mess of a device tree, and was still running into build errors. If new drivers are what you want, use FML. I'll focus on keeping the regular CM builds updated for the time being.
musical_chairs said:
Update: For now, I have stopped working on building CyanogenMod with the DDK 1.9 drivers. I was ending up with a completely unsustainable mess of a device tree, and was still running into build errors. If new drivers are what you want, use FML. I'll focus on keeping the regular CM builds updated for the time being.
Click to expand...
Click to collapse
Link to toroplus build for fml?
Zeinzu said:
Link to toroplus build for fml?
Click to expand...
Click to collapse
I'm following its developements, but haven't had time to try it personally yet.
http://forum.xda-developers.com/galaxy-nexus/sprint-develop/rom-fml-fork-life-10-13-2014-t2903695
Thanks for trying anyhow. I'm glad cm11 still has a fighting chance with the GNex, thanks to you, and all the others who are able to help out.
We're all waiting for cm12 to get to a buildable state. In the meantime, I've been working on upgrading my build box. My old machine was just barely capable of building android, the 'new' one isn't new but it was a real beast in its day. Time for a clean build has dropped from a day and a half to two and a half hours. I'm happy...
jd14771 said:
just curious, how difficult is it to compile roms? Do you need to know how to write your own code or is it over glorified copy and pasting with packages and stuff?
Click to expand...
Click to collapse
I do a lot of copying and pasting, a lot of reading guides, and a whole lot of google-ing. I don't know how to write my own code, but I have lots of experience with applying patches. Compiling roms is not that hard if you're a Linux user, have a working knowledge of the command line, and have a basic understanding of git. Take away any one of those things and it becomes a whole lot harder.
jd14771 said:
Yeah i haven't gotten to play with linux, nor do i know what git's are (i think they are large batch's of code posted in plain text?) . always wanted to try but don't have the time.
Click to expand...
Click to collapse
git is the software the devs use to keep track of changes in the code. Most Android devs have their git repositories on Github, those are probably what you are thinking of. Every little change (called a 'commit') has its own unique hash number. It's pretty amazing, you can look through somebody else's commits and find one that fixes a bug you are working on, or split tens of thousands of changes in half, then in half again, then in half again, etc., and pinpoint the exact commit that causes a bug on your system - though that's more useful in Linux kernel development than in Android.
I don't really have the time either, but it's such a fun hobby...
Using quickboot?
Coming from Vanir. Really like the facility quickboot gives. Anyone "enabled" it? I can't seem actually show the field to turn it on. Settings search finds it, but that's it... Noticed Dev options is hidden also. What's up?
Props for keeping CM11 updated. Really like I can actually use SMS in Hangouts.
I haven't been following the nightly changes since toroplus went dark, but I ran a build today--nothing special, just the latest cm...whatever changes they are. I could post it but don't know if I should make another thread or just link to it in here.
Anything substantial get added to general cm in the last few months?
I tried to run a build of cm12 but it looks like things still aren't ready for building yet, either that or I'm not sure how to switch back and forth between the cm11 repo and cm12 without getting repo update errors.
yotvb531 said:
I tried to run a build of cm12 but it looks like things still aren't ready for building yet, either that or I'm not sure how to switch back and forth between the cm11 repo and cm12 without getting repo update errors.
Click to expand...
Click to collapse
I got cm12 built and booting for toro for the first time today. I'm trying to get mobile data working on that, then I'll give toroplus a shot. Looks like it shouldn't be too much trouble. Feel free to post any of your builds here, or start your own thread if you prefer.
Here's my cm11 build from yesterday--equivalent to a plain nightly. It's been running fine since I dirty flashed it last night. Md5sum is linked as well and noted below.
https://www.dropbox.com/s/lp4j3yayuktmlot/cm-11-20141227-UNOFFICIAL-toroplus.zip?dl=1
https://www.dropbox.com/s/z1b72j7oh70eg5w/cm-11-20141227-UNOFFICIAL-toroplus.zip.md5sum?dl=1
MD5 Sum: e6c265c57e00b4949362d6ff53c9a799
Well I got cm12 built and booting on toroplus, unfortunately the RIL is completely borked, so no cell service at all at this point. I'll keep working on that, in the mean time check out the updated cm11 build in the post right above this one.
Hello! I'll be posting pure AOSP builds whenever there are new versions of android released (providing I have the time).
If you choose to use these builds, please ensure you have unlocked your bootloader and have custom recovery installed. I have also noticed that TWRP seems a little wonky at this point, so in order for me to flash it correctly, I had to wipe, then restart recovery, then flash. Hope that's not the case for everyone else.
3/18/15
Added ability to change DPI.
3/15/15
No longer messes with recovery at all. Bluetooth working, data does not force encrypt.
3/13/15
Android 5.1.0_r1 (LMY47D)
This release will wipe your recovery. If anyone needs this changed let me know and I will build another.
1/3/2015
Android 5.0.2_r1 (LRX22G)
Data is now encryptable, meaning your unencrypted data should stick going forward.
Included my own build of stock kernel with Linaro 4.9.3 toolchain.
Fixed bluetooth (thanks Lollipopalooza/Craig)
No longer need to re-flash recovery.
12/6/2014
Android 5.0.1_r1 (LRX22C)
You will need to install separate gapps
You will need to re-flash your custom recovery after you install (you all let me know if I should change this or not, I think I will on future builds)
I am not responsible for anything that happens to your device or to you, yourself while flashing this.
Latest DL Links will be in post #2.
XDA:DevDB Information
Pure AOSP Flounder, ROM for the Nexus 9
Contributors
gchild320
ROM OS Version: 5.0.x Lollipop
Based On: AOSP
Version Information
Status: Stable
Created 2014-12-06
Last Updated 2015-01-03
Downloads
3/18/15
https://www.androidfilehost.com/?fid=95916177934543409
3/15/15
https://www.androidfilehost.com/?fid=95916177934541983
3/13/15
5.1 - https://www.androidfilehost.com/?fid=95916177934540786
1/3/14
Flounder Android 5.0.2_r1 build LRX22G https://www.androidfilehost.com/?fid=95864024717074545
Future FAQ if necessary (let's hope not).
Thank you!!!!
Will test it tomorow
I hope cm12 will build on arm64 soon
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
mpmilestogo said:
Just a few questions. What gapps do you recommend? What twrp ? There is the mainline version and the one @USBhost did. Thanks for the ROM!! Really appreciate seeing this show up.
Click to expand...
Click to collapse
I didn't realize that there were two versions of twrp...I used the one from twrp website.
gchild320 said:
I didn't realize that there were two versions of twrp...I used the one from twrp website.
Click to expand...
Click to collapse
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
USBhost said:
Yep
https://s.basketbuild.com/devs/USBhost/Nexus 9/recovery
I fixed some things
in it
Factory reset will not encrypt data
fixed the device name
look bit better
custom built FIRE-ICE kernel for recovery
Click to expand...
Click to collapse
Hell yes checking this out tomorrow.
build
Awesome !!!! Been waiting for this. How did u build? Last week since their are little options for roms decided to build one on my own and i did a repo sync to Google source but when i did lunch flounder wasn't listed in the build options ?
Flounder still isn't listed just lunch it anyway
Made a video running the ROM. Works very well!!
https://www.youtube.com/watch?v=kVQW-PMepn0
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Hiro Nakamura said:
Hello,
can anyone provide a minimal gapps pack? I would like to avoid too much bloatware
Click to expand...
Click to collapse
belair56 said:
http://fitsnugly.euroskank.com/?rom=banks&device=gapps
This maybe what you are looking for.
Click to expand...
Click to collapse
Well i don't think it's 64bit version or is it ?
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
From what I understand the apps themselves need to be optimized for 64 internally. These are all Google apps so they are if Google did so. As you update from the play store you don't choose if you're running 64bit or not.
As always I can be wrong.
Hiro Nakamura said:
Well i don't think it's 64bit version or is it ?
Click to expand...
Click to collapse
This is actually a great question.
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
omvir said:
Adaptive brightness doesn't work. Other than that everything seems to be working.
Edit: Okay so I used an app to look at which sensors were working and which ones weren't... The proximity sensor is not working at all.
Click to expand...
Click to collapse
Adaptive brightness is working flawlessly. Maybe you had a bad download or flash.
gchild320 said:
Flounder still isn't listed just lunch it anyway
Click to expand...
Click to collapse
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
jlokos said:
I use USBhost's version of TWRP. I tried to flash the rom following directions in OP. It wouldn't flash. First it said for flounder and this device is flounder. Also said something about updater binary. I got this with the other rom also. I tried un-mounting and mounting system, but I still got the error messages. Any ideas?
Click to expand...
Click to collapse
I manually changed it to work with official twrp... Not sure why twrp is calling it volantis instead of flounder but that's why. Also, to get anything to flash in twrp at the moment, I have to reboot recovery after wiping. Hope this helps.
Unofficial Cyanogenmod 13.0
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you
Click to expand...
Click to collapse
Download Link - CM 13.0/Android 6.0:
AndroidFileHost
Instructions:
Flash ROM(Link above)
Open GAPPS - GAPPS - Select ARM, 6.0 in the filters and choose the desired package (micro, nano, pico...... )
Reboot
Success
Donations
Please donate to keep this project alive!! It costs to maintain the hardware, Internet for the frequent updates and various fixes
Android 6.0 Updates:
Use ES File Manager from Play store, CM File Manager has not been upgraded for 6.0. CM file manager is still WIP.
Things which are broken:
You tell me
Please report bugs with Logs. Any bug will be ignored if not reported with Logs
Kernel Source -
https://github.com/CyanogenMod/android_kernel_samsung_d2
ROM Souce:
https://github.com/CyanogenMod/
Credit:
CM Team for the source
XDA:DevDB Information
Unofficial Cyanogenmod 12.1 for d2att, d2tmo, ROM for the AT&T Samsung Galaxy S III
Contributors
matrixzone, invisiblek, Cyanogenmod team
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Latest bootloader
Based On: CyanogenMod -
Version Information
Status: Beta
Created 2014-12-10
Last Updated 2015-11-09
Edit
Mine 2
Last one I promise
Will give it a spin! Thanks
Awesome stuff, thank you. Would anyone mind commenting on Wifi AP for me when you have a sec? I require it at the moment, and haven't had any luck with any other lollipop builds that have been released so far (Can connect to a network, but no internet).
Thanks so much.
matrixzone said:
Mine
This is my first Development thread on XDA. Please PM me if you think some information is missing or should be removed.
Click to expand...
Click to collapse
Congrats on your first development thread on XDA! Hope it's a good experience for you Can't wait to get home and get this loaded up. Good job bro:thumbup:
Maybe now you can catch up on a few z's
So it looks like you and Pandasa123 are both working on CM12 builds. Will these two be merged, or will they be separate?
Thanks for the build. I flashed it and so far it seems great for a beta. The only issue I'm having other than the camera is lte is iffy, sometimes it works but most of the time it won't. It was the same for other LP builds. I'm on the NE4 bootloader if it matters, if you want a logcat let me know and I'll try to grab one.
Thanks again for making a build for our phone.
Guys I hope the GPS icon will be playing good with this release.
that1guyty said:
So it looks like you and Pandasa123 are both working on CM12 builds. Will these two be merged, or will they be separate?
Click to expand...
Click to collapse
Sorry can't comment on this.
Flashed with no problems on my T999L. Beside the camera the only problem I see is the clock is showing GMT time instead of PST for me. I did check the settings. Seems like a great start.
Hi one question currently have installed the previous version to install this a clean install is required or can be a dirty
xxrafasxx said:
Hi one question currently have installed the previous version to install this a clean install is required or can be a dirty
Click to expand...
Click to collapse
It is always safer to wipe first, then flash the rom clean. Less chance of something going wrong.
kenetix said:
It is always safer to wipe first, then flash the rom clean. Less chance of something going wrong.
Click to expand...
Click to collapse
thanks for the advice and prompt response as down and enjoy this new vercion
nsmith4 said:
Thanks for the build. I flashed it and so far it seems great for a beta. The only issue I'm having other than the camera is lte is iffy, sometimes it works but most of the time it won't. It was the same for other LP builds. I'm on the NE4 bootloader if it matters, if you want a logcat let me know and I'll try to grab one.
Thanks again for making a build for our phone.
Click to expand...
Click to collapse
Yes please share the logs.
I am building another build, if this compiles will update the OP. Seems there are couple of updates on AudioFx and Music app from CM in this build along with SE Linux, CAF updates.
Hope the last build was strong.
OP updated with today's build 12/11. Enjoy!!
I will be posting updated builds frequently when I notice updates from CM
Edit 1: Sorry I have put the old 12/10 build link in the OP. Updating the link
Edit 2: 12/11 link fixed in the OP, Mirror is also up
matrixzone said:
OP updated with today's build 12/11. Enjoy!!
I will be posting updated builds frequently when I notice updates from CM
Edit 1: Sorry I have put the old 12/10 build link in the OP. Updating the link
Edit 2: 12/11 link fixed in the OP, Mirror is also up
Click to expand...
Click to collapse
Hope camera works now [emoji27]
Mervingio said:
Hope camera works now [emoji27]
Click to expand...
Click to collapse
Camera works with the 3rd party apps like Open Camera, Camera FX, etc.
This is a port of Jolla's Sailfish OS for h815.
Standard disclaimer applies:
I take no responsibility if anything happens to your phone, if your alarm doesn't work or if it reboots when you call emergency numbers. Flash at your own risk.
Don't flash this if you need a fully working phone.
Beta? 1.1
What works:
Wifi, 4G/LTE, sound, calls, vibration, SMS, Jolla Store, GPS, accelerometer,
What doesn't:
Camera, bluetooth, stock browser (use web pirate), wifi passwords need to be entered after a reboot, some video playback crashes (can be fixed by using software decoding, for example gstreamer10-libav on openrepos)
Possibly more, please report any issues
Install instructions:
Make sure you have a backup of anything you don't want to lose, preferably not on the device
Full wipe (might work without)
Flash LineageOS 14.1
Flash sailfishos-h815
Ignore any "no system installed" warnings from TWRP
Please note that this is not an Android ROM. Your Android apps will not work until someone gets sfdroid working.
Thanks to:
The friendly guys at #sailfishos-porters for helping me out a lot
Jolla for developing Sailfish OS
Download links: a few posts below
XDA:DevDB Information
[H815] Sailfish OS port, ROM for the LG G4
Contributors
kamnxt
ROM OS Version: 7.x Nougat
Based On: Sailfish OS
Version Information
Status: Beta
Current Beta Version: 11.02.18
Beta Release Date: 2018-02-11
Created 2017-07-29
Last Updated 2018-02-12
Downloads:
LineageOS 14.1:
I'm using the version from here right now:
https://www.lineageoslog.com/14.1/h815#201711070000
Sailfish OS: Latest here: https://androidfilehost.com/?w=files&flid=202570
All versions here: https://androidfilehost.com/?w=files&flid=202568
My sources:
https://github.com/kamnxt/droid-hal-h815
https://github.com/kamnxt/hybris-boot
https://github.com/kamnxt/android_kernel_lge_msm8992
Will try to upload everything soon
Changelog:
alpha 1 - 29.07.2017:
Initial release
Would be nice for someone to test. Also, formatting needs sorted for this first post along with source code links etc
OP, just make few 'reserved' posts, you need to have 10 posts to post a link
Sent from my LG-H815 using Tapatalk
Kye2000 said:
Would be nice for someone to test. Also, formatting needs sorted for this first post along with source code links etc
Click to expand...
Click to collapse
Minto107 said:
OP, just make few 'reserved' posts, you need to have 10 posts to post a link
Sent from my LG-H815 using Tapatalk
Click to expand...
Click to collapse
Done, will post links now
kamnxt said:
Done, will post links now
Click to expand...
Click to collapse
i flashed now but i am stuck here
gentr said:
i flashed now but i am stuck here
Click to expand...
Click to collapse
That's a part of the tutorial. If it doesn't work properly, you can try to skip it by tapping the corners of the screen from top left clockwise.
kamnxt said:
That's a part of the tutorial. If it doesn't work properly, you can try to skip it by tapping the corners of the screen from top left clockwise.
Click to expand...
Click to collapse
It's easy os system and very attractive to use them, hope for the new update very soon.
Great news!
When camera and browser will start working I'll try the port, till then... it's too much alpha for me
Thanks for the port!
Laghie said:
Great news!
When camera and browser will start working I'll try the port, till then... it's too much alpha for me
Thanks for the port!
Click to expand...
Click to collapse
You can use an unofficial browser like Webcat instead. Camera doesn't work yet though. I'll try to release a version with qtscenegraph-adaptation fixed soon (fixes black images).
Hello! Are you still working on this?
Laghie said:
Hello! Are you still working on this?
Click to expand...
Click to collapse
Hey! I've been kind of busy lately, but I was thinking about updating it recently. I can try to compile a new version if you want (hopefully including a fix for the pink screen issue).
That would be nice. Also a little status update is Glas
Thanks! But take your time, life's more important that alpha testing
BTW, is it possible to dual boot android and sailfish?
Laghie said:
Thanks! But take your time, life's more important that alpha testing
BTW, is it possible to dual boot android and sailfish?
Click to expand...
Click to collapse
You can dualboot by modifying fstab in the kernel and recovery to point the /data and /system to sdcard.
But you need quick sdcard to not be totally unusable.
Status update time!
I'm setting up the build environment on my new laptop (it's been a while since I last messed around with SFOS...) New version should be coming soon™ (hopefully within a few days). Trying to build with a newer version of LineageOS as well, so we'll see if that works.
Yes please. Would love to see this working. There isn't enough new stuff out there for the G4 and this would be awesome.
#ApolloLiteProblems said:
Yes please. Would love to see this working. There isn't enough new stuff out there for the G4 and this would be awesome.
Click to expand...
Click to collapse
Seems like I lost some of the files from the last time I got things working... I need to find out how I got sound working, since now it no longer works... I'll see if I can get it working again.
Awesome.
I'm just curious whether anyone has already compiled the AOSP for A13 and booted it. I noticed it had already been done/tested on OP5/5T, but wasn't sure if it had been done for P6P. I plan on trying my hand at it, but wanting to know what others may have experienced before I commit my slower internet connection to downloading the Repo.
GrapheneOS has test builds up for A13, which should be buildable using the normal approach. Also hardened with some extra security features.
Yes, on ArrowOS, temp issues however that was same day arrow started updating to 13, have not run a build since. Evolution X reboot a few seconds after setup screen loads, does not boot without gapps either.
I have tried for several days, but I'm missing something
It's a custom rom for personal use. A12.1 booted and worked perfectly but 13 reboots to bootloader
RealSchnedi - Repositories
RealSchnedi has 15 repositories available. Follow their code on GitHub.
github.com
Schnedi said:
I have tried for several days, but I'm missing something
It's a custom rom for personal use. A12.1 booted and worked perfectly but 13 reboots to bootloader
RealSchnedi - Repositories
RealSchnedi has 15 repositories available. Follow their code on GitHub.
github.com
Click to expand...
Click to collapse
Stupid question have you flashed both slots with 13 as I know boot loader won't load of you have 12 version and not updated to 13 but also it has an anti roll back in it sorry not much help
liggerz87 said:
Stupid question have you flashed both slots with 13 as I know boot loader won't load of you have 12 version and not updated to 13 but also it has an anti roll back in it sorry not much help
Click to expand...
Click to collapse
I flashed the bootloader and radio on both slots but haven't tried to change the current slot and flash the rom
But if I flash the official 13 release (only in the current slot) it boots, so, not sure if that's the problem. Anyway, I'll try it
Schnedi said:
I flashed the bootloader and radio on both slots but haven't tried to change the current slot and flash the rom
But if I flash the official 13 release (only in the current slot) it boots, so, not sure if that's the problem. Anyway, I'll try it
Click to expand...
Click to collapse
Been looking at our github, you are using anayw2001 repo for your vendor files, remove the below from Android.bp. I had Restless nights with a poop load of testing thinking it was something with a missing lib file or so when i test anay's vendor files with lots of comparison to lineage extract tools that worked. Well if your getting bootonce-bootloader error that is as reason for bootloader load.
prebuilt_apex {
name: "com.google.android.compos",
owner: "google_devices",
src: "system_ext/apex/com.google.android.compos.apex",
prefer: true,
system_ext_specific: true,
}
prebuilt_apex {
name: "com.google.android.virt",
owner: "google_devices",
src: "system_ext/apex/com.google.android.virt.apex",
prefer: true,
system_ext_specific: true,
}
alvin14 said:
Yes, on ArrowOS, temp issues however that was same day arrow started updating to 13, have not run a build since. Evolution X reboot a few seconds after setup screen loads, does not boot without gapps either.
Click to expand...
Click to collapse
Update on this for ArrowOS. After removing connectivitythernmalmanager that fixed the issue as i am getting selinux denials with it, everything works, been testing for a few days.
alvin14 said:
Been looking at our github, you are using anayw2001 repo for your vendor files, remove the below from Android.bp. I had Restless nights with a poop load of testing thinking it was something with a missing lib file or so when i test anay's vendor files with lots of comparison to lineage extract tools that worked. Well if your getting bootonce-bootloader error that is as reason for bootloader load.
prebuilt_apex {
name: "com.google.android.compos",
owner: "google_devices",
src: "system_ext/apex/com.google.android.compos.apex",
prefer: true,
system_ext_specific: true,
}
prebuilt_apex {
name: "com.google.android.virt",
owner: "google_devices",
src: "system_ext/apex/com.google.android.virt.apex",
prefer: true,
system_ext_specific: true,
}
Click to expand...
Click to collapse
I was already using your vendor from gitlab (arrow branch). It did the trick, bootloader not triggered anymore
Still not booting but it must be related to rom sources, will take a look
Thanks a lot
Schnedi said:
I was already using your vendor from gitlab (arrow branch). It did the trick, bootloader not triggered anymore
Still not booting but it must be related to rom sources, will take a look
Thanks a lot
Click to expand...
Click to collapse
Do a logcat during boot, will definitely help with that.
card13 said:
I'm just curious whether anyone has already compiled the AOSP for A13 and booted it. I noticed it had already been done/tested on OP5/5T, but wasn't sure if it had been done for P6P. I plan on trying my hand at it, but wanting to know what others may have experienced before I commit my slower internet connection to downloading the Repo.
Click to expand...
Click to collapse
There is a build of Hentai which is very good. You can even dirty flash from stock
alvin14 said:
Do a logcat during boot, will definitely help with that.
Click to expand...
Click to collapse
Thanks, I'm making some tests, not so sure it's the rom sources
Question, to build Evo and Arrow, are you using your adevtool vendor or the other one?
Schnedi said:
Thanks, I'm making some tests, not so sure it's the rom sources
Question, to build Evo and Arrow, are you using your adevtool vendor or the other one?
Click to expand...
Click to collapse
Adevtool. The other one works as well however i need to clean it up a bit.
hi guys,
@Schnedi what gapps package are you using for prime?
And does udfps work on your raven with your prime base?
Well, after a dozen of test builds, I finally made it work
Still have to fix things tho
Schnedi said:
Well, after a dozen of test builds, I finally made it work
Still have to fix things tho
Click to expand...
Click to collapse
Cool. I got oriole too boot prime yesterday too. Nice work!
What gapps package do you use? Is it on gitlab somewhere?
ny-hardcore said:
Cool. I got oriole too boot prime yesterday too. Nice work!
What gapps package do you use? Is it on gitlab somewhere?
Click to expand...
Click to collapse
I'm using this one: https://gitlab.com/spkal01/android_vendor_gms/-/tree/pyro
But removed some apps that can be installed from the store (drive, youtube, gmail, photos...)
Also, latest commit from fw/b fixes udfps
There's just a few features, I just pick the ones I use, didn't build prime to share it, so I'm not picking all of them. You can always fork the project and pick some features you use, PM me if you need any help with it
Schnedi said:
I'm using this one: https://gitlab.com/spkal01/android_vendor_gms/-/tree/pyro
But removed some apps that can be installed from the store (drive, youtube, gmail, photos...)
Also, latest commit from fw/b fixes udfps
There's just a few features, I just pick the ones I use, didn't build prime to share it, so I'm not picking all of them. You can always fork the project and pick some features you use, PM me if you need any help with it
Click to expand...
Click to collapse
Thanks for the reply, i spark gapps too by the way haha
i picked udfps myself so had it working already
i like your vendor /vendor/extras very clean setup.
i know how to fork, but no need for now